Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig =================================================================== --- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Kconfig +++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Kconfig @@ -65,6 +65,14 @@ config MACH_PRONGHORNMETRO Engineering Pronghorn Metro Platform. For more information on this platform, see . +config MACH_COMPEX + bool "Compex WP18 / NP18A" + select PCI + help + Say 'Y' here if you want your kernel to support Compex' + WP18 or NP18A boards. For more information on this + platform, see http://openwrt.org + config ARCH_IXDP425 bool "IXDP425" help Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile =================================================================== --- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/Makefile +++ linux-2.6.24.7/arch/arm/mach-ixp4xx/Makefile @@ -17,6 +17,7 @@ obj-pci-$(CONFIG_MACH_GATEWAY7001) += ga obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o +obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o obj-y += common.o @@ -32,5 +33,6 @@ obj-$(CONFIG_MACH_GATEWAY7001) += gatewa obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o obj-$(CONFIG_MACH_FSG) += fsg-setup.o obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o +obj-$(CONFIG_MACH_COMPEX) += compex-setup.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/compex-setup.c =================================================================== --- /dev/null +++ linux-2.6.24.7/arch/arm/mach-ixp4xx/compex-setup.c @@ -0,0 +1,120 @@ +/* + * arch/arm/mach-ixp4xx/compex-setup.c + * + * Ccompex WP18 / NP18A board-setup + * + * Copyright (C) 2007 Imre Kaloz + * + * based on ixdp425-setup.c: + * Copyright (C) 2003-2005 MontaVista Software, Inc. + * + * Author: Imre Kaloz + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +static struct flash_platform_data compex_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource compex_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device compex_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &compex_flash_data, + }, + .num_resources = 1, + .resource = &compex_flash_resource, +}; + +static struct resource compex_uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM + } +}; + +static struct plat_serial8250_port compex_uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, +}; + +static struct platform_device compex_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev.platform_data = compex_uart_data, + .num_resources = 2, + .resource = compex_uart_resources, +}; + +static struct platform_device *compex_devices[] __initdata = { + &compex_flash, + &compex_uart +}; + +static void __init compex_init(void) +{ + ixp4xx_sys_init(); + + compex_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + compex_flash_resource.end = + IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; + + platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices)); +} + +#ifdef CONFIG_MACH_COMPEX +MACHINE_START(COMPEX, "Compex WP18 / NP18A") + /* Maintainer: Imre Kaloz */ + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .boot_params = 0x0100, + .init_machine = compex_init, +MACHINE_END +#endif Index: linux-2.6.24.7/arch/arm/mach-ixp4xx/ixdp425-pci.c =================================================================== --- linux-2.6.24.7.orig/arch/arm/mach-ixp4xx/ixdp425-pci.c +++ linux-2.6.24.7/arch/arm/mach-ixp4xx/ixdp425-pci.c @@ -66,7 +66,7 @@ struct hw_pci ixdp425_pci __initdata = { int __init ixdp425_pci_init(void) { if (machine_is_ixdp425() || machine_is_ixcdp1100() || - machine_is_ixdp465() || machine_is_kixrp435()) + machine_is_ixdp465() || machine_is_kixrp435() || machine_is_compex()) pci_common_init(&ixdp425_pci); return 0; } Index: linux-2.6.24.7/arch/arm/tools/mach-types =================================================================== --- linux-2.6.24.7.orig/arch/arm/tools/mach-types +++ linux-2.6.24.7/arch/arm/tools/mach-types @@ -1276,7 +1276,7 @@ oiab MACH_OIAB OIAB 1269 smdk6400 MACH_SMDK6400 SMDK6400 1270 nokia_n800 MACH_NOKIA_N800 NOKIA_N800 1271 greenphone MACH_GREENPHONE GREENPHONE 1272 -compex42x MACH_COMPEXWP18 COMPEXWP18 1273 +compex MACH_COMPEX COMPEX 1273 xmate MACH_XMATE XMATE 1274 energizer MACH_ENERGIZER ENERGIZER 1275 ime1 MACH_IME1 IME1 1276