Index: linux-2.6.38-rc6/arch/arm/mach-omap2/board-n8x0.c =================================================================== --- linux-2.6.38-rc6.orig/arch/arm/mach-omap2/board-n8x0.c 2011-02-27 21:55:22.978833306 +0100 +++ linux-2.6.38-rc6/arch/arm/mach-omap2/board-n8x0.c 2011-02-27 22:36:52.335957066 +0100 @@ -23,6 +23,9 @@ #include #include #include +#include +#include +#include #include #include @@ -36,6 +39,7 @@ #include #include #include +#include #include "mux.h" @@ -43,6 +47,221 @@ static int slot1_cover_open; static int slot2_cover_open; static struct device *mmc_device; +/* We map the FN key as LALT to workaround an X keycode problem. + * The XKB map needs to be adjusted to support this. */ +#define MAP_FN_AS_LEFTALT + +static s16 rx44_keymap[LM8323_KEYMAP_SIZE] = { + [0x01] = KEY_Q, + [0x02] = KEY_K, + [0x03] = KEY_O, + [0x04] = KEY_P, + [0x05] = KEY_BACKSPACE, + [0x06] = KEY_A, + [0x07] = KEY_S, + [0x08] = KEY_D, + [0x09] = KEY_F, + [0x0a] = KEY_G, + [0x0b] = KEY_H, + [0x0c] = KEY_J, + + [0x11] = KEY_W, + [0x12] = KEY_F4, + [0x13] = KEY_L, + [0x14] = KEY_APOSTROPHE, + [0x16] = KEY_Z, + [0x17] = KEY_X, + [0x18] = KEY_C, + [0x19] = KEY_V, + [0x1a] = KEY_B, + [0x1b] = KEY_N, + [0x1c] = KEY_LEFTSHIFT, /* Actually, this is both shift keys */ + [0x1f] = KEY_F7, + + [0x21] = KEY_E, + [0x22] = KEY_SEMICOLON, + [0x23] = KEY_MINUS, + [0x24] = KEY_EQUAL, +#ifdef MAP_FN_AS_LEFTALT + [0x2b] = KEY_LEFTALT, +#else + [0x2b] = KEY_FN, +#endif + [0x2c] = KEY_M, + [0x2f] = KEY_F8, + + [0x31] = KEY_R, + [0x32] = KEY_RIGHTCTRL, + [0x34] = KEY_SPACE, + [0x35] = KEY_COMMA, + [0x37] = KEY_UP, + [0x3c] = KEY_COMPOSE, + [0x3f] = KEY_F6, + + [0x41] = KEY_T, + [0x44] = KEY_DOT, + [0x46] = KEY_RIGHT, + [0x4f] = KEY_F5, + [0x51] = KEY_Y, + [0x53] = KEY_DOWN, + [0x55] = KEY_ENTER, + [0x5f] = KEY_ESC, + + [0x61] = KEY_U, + [0x64] = KEY_LEFT, + + [0x71] = KEY_I, + [0x75] = KEY_KPENTER, +}; + +static struct lm8323_platform_data lm8323_pdata = { + .repeat = 0, /* Repeat is handled in userspace for now. */ + .keymap = rx44_keymap, + .size_x = 8, + .size_y = 12, + .debounce_time = 12, + .active_time = 500, + + .name = "Internal keyboard", + .pwm_names[0] = "n810::keyboard", + .pwm_names[1] = "n810::cover", +}; + +#define OMAP_TAG_NOKIA_BT 0x4e01 + +struct omap_bluetooth_config { + u8 chip_type; + u8 bt_wakeup_gpio; + u8 host_wakeup_gpio; + u8 reset_gpio; + u8 bt_uart; + u8 bd_addr[6]; + u8 bt_sysclk; +}; + +static struct platform_device n8x0_bt_device = { + .name = "hci_h4p", + .id = -1, + .num_resources = 0, +}; + +void __init n8x0_bt_init(void) +{ + const struct omap_bluetooth_config *bt_config; + + bt_config = (void *) omap_get_config(OMAP_TAG_NOKIA_BT, + struct omap_bluetooth_config); + n8x0_bt_device.dev.platform_data = (void *) bt_config; + if (platform_device_register(&n8x0_bt_device) < 0) + BUG(); +} + +#define RX51_TSC2005_RESET_GPIO 94 +#define RX51_TSC2005_IRQ_GPIO 106 + +#ifdef CONFIG_TOUCHSCREEN_TSC2005 +static struct tsc2005_platform_data tsc2005_config; +static void rx51_tsc2005_set_reset(bool enable) +{ + gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); +} + +static struct omap2_mcspi_device_config tsc2005_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, +}; +#endif + +static void __init tsc2005_set_config(void) +{ + const struct omap_lcd_config *conf; + + conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); + if (conf != NULL) { +#ifdef CONFIG_TOUCHSCREEN_TSC2005 + if (strcmp(conf->panel_name, "lph8923") == 0) { + tsc2005_config.ts_x_plate_ohm = 180; + tsc2005_config.ts_hw_avg = 0; + tsc2005_config.ts_ignore_last = 0; + tsc2005_config.ts_touch_pressure = 1500; + tsc2005_config.ts_stab_time = 100; + tsc2005_config.ts_pressure_max = 2048; + tsc2005_config.ts_pressure_fudge = 2; + tsc2005_config.ts_x_max = 4096; + tsc2005_config.ts_x_fudge = 4; + tsc2005_config.ts_y_max = 4096; + tsc2005_config.ts_y_fudge = 7; + tsc2005_config.set_reset = rx51_tsc2005_set_reset; + } else if (strcmp(conf->panel_name, "ls041y3") == 0) { + tsc2005_config.ts_x_plate_ohm = 280; + tsc2005_config.ts_hw_avg = 0; + tsc2005_config.ts_ignore_last = 0; + tsc2005_config.ts_touch_pressure = 1500; + tsc2005_config.ts_stab_time = 1000; + tsc2005_config.ts_pressure_max = 2048; + tsc2005_config.ts_pressure_fudge = 2; + tsc2005_config.ts_x_max = 4096; + tsc2005_config.ts_x_fudge = 4; + tsc2005_config.ts_y_max = 4096; + tsc2005_config.ts_y_fudge = 7; + tsc2005_config.set_reset = rx51_tsc2005_set_reset; + } else { + printk(KERN_ERR "Unknown panel type, set default " + "touchscreen configuration\n"); + tsc2005_config.ts_x_plate_ohm = 200; + tsc2005_config.ts_stab_time = 100; + } +#endif + } +} + +static struct omap2_mcspi_device_config mipid_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, +}; + +extern struct mipid_platform_data n8x0_mipid_platform_data; + +extern void n8x0_mipid_init(void); +extern void n8x0_blizzard_init(void); + +static struct omap_gpio_switch n8x0_gpio_switches[] __initdata = { + { + .name = "headphone", + .gpio = -1, + .debounce_rising = 200, + .debounce_falling = 200, + }, { + .name = "cam_act", + .gpio = -1, + .debounce_rising = 200, + .debounce_falling = 200, + }, { + .name = "cam_turn", + .gpio = -1, + .debounce_rising = 100, + .debounce_falling = 100, + }, { + .name = "slide", + .gpio = -1, + .debounce_rising = 200, + .debounce_falling = 200, + }, { + .name = "kb_lock", + .gpio = -1, + .debounce_rising = 200, + .debounce_falling = 200, + }, +}; + +static void __init n8x0_gpio_switches_init(void) +{ + /* The switches are actually registered through ATAG mechanism. + * This just updates the parameters (thus .gpio is -1) */ + omap_register_gpio_switches(n8x0_gpio_switches, + ARRAY_SIZE(n8x0_gpio_switches)); +} + #define TUSB6010_ASYNC_CS 1 #define TUSB6010_SYNC_CS 4 #define TUSB6010_GPIO_INT 58 @@ -146,12 +365,29 @@ static struct omap2_mcspi_device_config static struct spi_board_info n800_spi_board_info[] __initdata = { { + .modalias = "lcd_mipid", + .bus_num = 1, + .chip_select = 1, + .max_speed_hz = 4000000, + .controller_data= &mipid_mcspi_config, + .platform_data = &n8x0_mipid_platform_data, + }, + { .modalias = "p54spi", .bus_num = 2, .chip_select = 0, .max_speed_hz = 48000000, .controller_data = &p54spi_mcspi_config, }, + { + .modalias = "tsc2005", + .bus_num = 1, + .chip_select = 0, + .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO), + .max_speed_hz = 6000000, + .controller_data = &tsc2005_mcspi_config, + .platform_data = &tsc2005_config, + }, }; #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ @@ -727,6 +963,11 @@ static struct aic3x_pdata n810_aic33_dat }; static struct i2c_board_info n810_i2c_board_info_2[] __initdata = { + { + I2C_BOARD_INFO("lm8323", 0x45), + .irq = OMAP_GPIO_IRQ(109), + .platform_data = &lm8323_pdata, + }, { I2C_BOARD_INFO("tlv320aic3x", 0x18), .platform_data = &n810_aic33_data, @@ -796,9 +1037,12 @@ static inline void board_serial_init(voi static void __init n8x0_init_machine(void) { omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC); + n8x0_gpio_switches_init(); n8x0_cbus_init(); + n8x0_bt_init(); /* FIXME: add n810 spi devices */ + tsc2005_set_config(); spi_register_board_info(n800_spi_board_info, ARRAY_SIZE(n800_spi_board_info)); omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1, @@ -808,6 +1052,8 @@ static void __init n8x0_init_machine(voi i2c_register_board_info(2, n810_i2c_board_info_2, ARRAY_SIZE(n810_i2c_board_info_2)); board_serial_init(); + n8x0_mipid_init(); + n8x0_blizzard_init(); gpmc_onenand_init(board_onenand_data); n8x0_mmc_init(); n8x0_usb_init(); Index: linux-2.6.38-rc6/arch/arm/mach-omap2/board-n8x0-lcd.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.38-rc6/arch/arm/mach-omap2/board-n8x0-lcd.c 2011-02-27 22:36:50.837929678 +0100 @@ -0,0 +1,127 @@ +/* + * linux/arch/arm/mach-omap2/board-n8x0.c + * + * Copyright (C) 2005-2009 Nokia Corporation + * Author: Juha Yrjola + * + * Modified from mach-omap2/board-generic.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include + +#include <../drivers/cbus/tahvo.h> + +#define N8X0_BLIZZARD_POWERDOWN_GPIO 15 + +// MIPID LCD Panel + +static void mipid_shutdown(struct mipid_platform_data *pdata) +{ + if (pdata->nreset_gpio != -1) { + pr_info("shutdown LCD\n"); + gpio_set_value(pdata->nreset_gpio, 0); + msleep(120); + } +} + +struct mipid_platform_data n8x0_mipid_platform_data = { + .shutdown = mipid_shutdown, +}; + +void __init n8x0_mipid_init(void) +{ + const struct omap_lcd_config *conf; + + conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); + if (conf != NULL) { + n8x0_mipid_platform_data.nreset_gpio = conf->nreset_gpio; + n8x0_mipid_platform_data.data_lines = conf->data_lines; + printk(KERN_INFO "N8x0 MIPID config loaded"); + } + else + printk(KERN_INFO "N8x0 MIPID config not provided"); +} + + +// Epson Blizzard LCD Controller + +static struct { + struct clk *sys_ck; +} blizzard; + +static int blizzard_get_clocks(void) +{ + blizzard.sys_ck = clk_get(0, "osc_ck"); + if (IS_ERR(blizzard.sys_ck)) { + printk(KERN_ERR "can't get Blizzard clock\n"); + return PTR_ERR(blizzard.sys_ck); + } + return 0; +} + +static unsigned long blizzard_get_clock_rate(struct device *dev) +{ + return clk_get_rate(blizzard.sys_ck); +} + +static void blizzard_enable_clocks(int enable) +{ + if (enable) + clk_enable(blizzard.sys_ck); + else + clk_disable(blizzard.sys_ck); +} + +static void blizzard_power_up(struct device *dev) +{ + /* Vcore to 1.475V */ + tahvo_set_clear_reg_bits(0x07, 0, 0xf); + msleep(10); + + blizzard_enable_clocks(1); + gpio_set_value(N8X0_BLIZZARD_POWERDOWN_GPIO, 1); +} + +static void blizzard_power_down(struct device *dev) +{ + gpio_set_value(N8X0_BLIZZARD_POWERDOWN_GPIO, 0); + blizzard_enable_clocks(0); + + /* Vcore to 1.005V */ + tahvo_set_clear_reg_bits(0x07, 0xf, 0); +} + +static struct blizzard_platform_data n8x0_blizzard_data = { + .power_up = blizzard_power_up, + .power_down = blizzard_power_down, + .get_clock_rate = blizzard_get_clock_rate, + .te_connected = 1, +}; + +void __init n8x0_blizzard_init(void) +{ + int r; + + r = gpio_request(N8X0_BLIZZARD_POWERDOWN_GPIO, "Blizzard pd"); + if (r < 0) + { + printk(KERN_ERR "Can't get N8x0 Blizzard powerdown GPIO %d\n", N8X0_BLIZZARD_POWERDOWN_GPIO); + return; + } + gpio_direction_output(N8X0_BLIZZARD_POWERDOWN_GPIO, 1); + + blizzard_get_clocks(); + omapfb_set_ctrl_platform_data(&n8x0_blizzard_data); + + printk(KERN_INFO "N8x0 Blizzard initialized"); +} Index: linux-2.6.38-rc6/arch/arm/mach-omap2/Makefile =================================================================== --- linux-2.6.38-rc6.orig/arch/arm/mach-omap2/Makefile 2011-02-22 02:25:52.000000000 +0100 +++ linux-2.6.38-rc6/arch/arm/mach-omap2/Makefile 2011-02-27 21:55:22.998833653 +0100 @@ -177,6 +177,7 @@ obj-$(CONFIG_MACH_OMAP_3430SDP) += boar hsmmc.o \ board-flash.o obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o +obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0-lcd.o obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \ sdram-nokia.o \ hsmmc.o Index: linux-2.6.38-rc6/arch/arm/plat-omap/include/plat/cbus.h =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ linux-2.6.38-rc6/arch/arm/plat-omap/include/plat/cbus.h 2011-02-27 21:55:22.998833653 +0100 @@ -0,0 +1,40 @@ +/* + * cbus.h - CBUS platform_data definition + * + * Copyright (C) 2004 - 2009 Nokia Corporation + * + * Written by Felipe Balbi + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __PLAT_CBUS_H +#define __PLAT_CBUS_H + +#define CBUS_RETU_DEVICE_ID 0x01 +#define CBUS_TAHVO_DEVICE_ID 0x02 + +struct cbus_host_platform_data { + int dat_gpio; + int clk_gpio; + int sel_gpio; +}; + +struct cbus_retu_platform_data { + int irq_base; + int irq_end; + int devid; +}; + +#endif /* __PLAT_CBUS_H */ Index: linux-2.6.38-rc6/arch/arm/plat-omap/include/plat/irqs.h =================================================================== --- linux-2.6.38-rc6.orig/arch/arm/plat-omap/include/plat/irqs.h 2011-02-22 02:25:52.000000000 +0100 +++ linux-2.6.38-rc6/arch/arm/plat-omap/include/plat/irqs.h 2011-02-27 21:55:22.999833671 +0100 @@ -411,7 +411,20 @@ #define TWL_IRQ_END TWL6030_IRQ_END #endif -#define NR_IRQS TWL_IRQ_END +/* GPMC related */ +#define OMAP_GPMC_IRQ_BASE (TWL_IRQ_END) +#define OMAP_GPMC_NR_IRQS 7 +#define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS) + +#define CBUS_RETU_IRQ_BASE OMAP_GPMC_IRQ_END +#ifdef CONFIG_CBUS_RETU +#define CBUS_RETU_NR_IRQS 16 +#else +#define CBUS_RETU_NR_IRQS 0 +#endif +#define CBUS_RETU_IRQ_END (CBUS_RETU_IRQ_BASE + CBUS_RETU_NR_IRQS) + +#define NR_IRQS CBUS_RETU_IRQ_END #define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32))