From cb888b2552199ace429731b772d5257c598d53df Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sun, 5 Jun 2011 23:38:46 +0200 Subject: [PATCH 03/27] MIPS: ath79: add common USB Host Controller device Add common platform_device and helper code to make the registration of the built-in USB controllers easier on the board which are using them. Also register the USB controller on the AP81 and PB44 boards. Signed-off-by: Gabor Juhos Signed-off-by: Imre Kaloz Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2442/ Signed-off-by: Ralf Baechle --- arch/mips/ath79/Kconfig | 5 + arch/mips/ath79/Makefile | 1 + arch/mips/ath79/dev-usb.c | 178 ++++++++++++++++++++++++ arch/mips/ath79/dev-usb.h | 17 +++ arch/mips/ath79/mach-ap81.c | 2 + arch/mips/ath79/mach-pb44.c | 2 + arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 32 ++++- 7 files changed, 236 insertions(+), 1 deletions(-) create mode 100644 arch/mips/ath79/dev-usb.c create mode 100644 arch/mips/ath79/dev-usb.h --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig @@ -9,6 +9,7 @@ config ATH79_MACH_AP81 select ATH79_DEV_GPIO_BUTTONS select ATH79_DEV_LEDS_GPIO select ATH79_DEV_SPI + select ATH79_DEV_USB help Say 'Y' here if you want your kernel to support the Atheros AP81 reference board. @@ -19,6 +20,7 @@ config ATH79_MACH_PB44 select ATH79_DEV_GPIO_BUTTONS select ATH79_DEV_LEDS_GPIO select ATH79_DEV_SPI + select ATH79_DEV_USB help Say 'Y' here if you want your kernel to support the Atheros PB44 reference board. @@ -52,4 +54,7 @@ config ATH79_DEV_LEDS_GPIO config ATH79_DEV_SPI def_bool n +config ATH79_DEV_USB + def_bool n + endif --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_ATH79_DEV_AR913X_WMAC) += d obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o +obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o # # Machines --- /dev/null +++ b/arch/mips/ath79/dev-usb.c @@ -0,0 +1,178 @@ +/* + * Atheros AR7XXX/AR9XXX USB Host Controller device + * + * Copyright (C) 2008-2011 Gabor Juhos + * Copyright (C) 2008 Imre Kaloz + * + * Parts of this file are based on Atheros' 2.6.15 BSP + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include "common.h" +#include "dev-usb.h" + +static struct resource ath79_ohci_resources[] = { + [0] = { + /* .start and .end fields are filled dynamically */ + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = ATH79_MISC_IRQ_OHCI, + .end = ATH79_MISC_IRQ_OHCI, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ath79_ohci_dmamask = DMA_BIT_MASK(32); +static struct platform_device ath79_ohci_device = { + .name = "ath79-ohci", + .id = -1, + .resource = ath79_ohci_resources, + .num_resources = ARRAY_SIZE(ath79_ohci_resources), + .dev = { + .dma_mask = &ath79_ohci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static struct resource ath79_ehci_resources[] = { + [0] = { + /* .start and .end fields are filled dynamically */ + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = ATH79_CPU_IRQ_USB, + .end = ATH79_CPU_IRQ_USB, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 ath79_ehci_dmamask = DMA_BIT_MASK(32); +static struct platform_device ath79_ehci_device = { + .name = "ath79-ehci", + .id = -1, + .resource = ath79_ehci_resources, + .num_resources = ARRAY_SIZE(ath79_ehci_resources), + .dev = { + .dma_mask = &ath79_ehci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +#define AR71XX_USB_RESET_MASK (AR71XX_RESET_USB_HOST | \ + AR71XX_RESET_USB_PHY | \ + AR71XX_RESET_USB_OHCI_DLL) + +static void __init ath79_usb_setup(void) +{ + void __iomem *usb_ctrl_base; + + ath79_device_reset_set(AR71XX_USB_RESET_MASK); + mdelay(1000); + ath79_device_reset_clear(AR71XX_USB_RESET_MASK); + + usb_ctrl_base = ioremap(AR71XX_USB_CTRL_BASE, AR71XX_USB_CTRL_SIZE); + + /* Turning on the Buff and Desc swap bits */ + __raw_writel(0xf0000, usb_ctrl_base + AR71XX_USB_CTRL_REG_CONFIG); + + /* WAR for HW bug. Here it adjusts the duration between two SOFS */ + __raw_writel(0x20c00, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ); + + iounmap(usb_ctrl_base); + + mdelay(900); + + ath79_ohci_resources[0].start = AR71XX_OHCI_BASE; + ath79_ohci_resources[0].end = AR71XX_OHCI_BASE + AR71XX_OHCI_SIZE - 1; + platform_device_register(&ath79_ohci_device); + + ath79_ehci_resources[0].start = AR71XX_EHCI_BASE; + ath79_ehci_resources[0].end = AR71XX_EHCI_BASE + AR71XX_EHCI_SIZE - 1; + ath79_ehci_device.name = "ar71xx-ehci"; + platform_device_register(&ath79_ehci_device); +} + +static void __init ar7240_usb_setup(void) +{ + void __iomem *usb_ctrl_base; + + ath79_device_reset_clear(AR7240_RESET_OHCI_DLL); + ath79_device_reset_set(AR7240_RESET_USB_HOST); + + mdelay(1000); + + ath79_device_reset_set(AR7240_RESET_OHCI_DLL); + ath79_device_reset_clear(AR7240_RESET_USB_HOST); + + usb_ctrl_base = ioremap(AR7240_USB_CTRL_BASE, AR7240_USB_CTRL_SIZE); + + /* WAR for HW bug. Here it adjusts the duration between two SOFS */ + __raw_writel(0x3, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ); + + iounmap(usb_ctrl_base); + + ath79_ohci_resources[0].start = AR7240_OHCI_BASE; + ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1; + platform_device_register(&ath79_ohci_device); +} + +static void __init ar724x_usb_setup(void) +{ + ath79_device_reset_set(AR724X_RESET_USBSUS_OVERRIDE); + mdelay(10); + + ath79_device_reset_clear(AR724X_RESET_USB_HOST); + mdelay(10); + + ath79_device_reset_clear(AR724X_RESET_USB_PHY); + mdelay(10); + + ath79_ehci_resources[0].start = AR724X_EHCI_BASE; + ath79_ehci_resources[0].end = AR724X_EHCI_BASE + AR724X_EHCI_SIZE - 1; + ath79_ehci_device.name = "ar724x-ehci"; + platform_device_register(&ath79_ehci_device); +} + +static void __init ar913x_usb_setup(void) +{ + ath79_device_reset_set(AR913X_RESET_USBSUS_OVERRIDE); + mdelay(10); + + ath79_device_reset_clear(AR913X_RESET_USB_HOST); + mdelay(10); + + ath79_device_reset_clear(AR913X_RESET_USB_PHY); + mdelay(10); + + ath79_ehci_resources[0].start = AR913X_EHCI_BASE; + ath79_ehci_resources[0].end = AR913X_EHCI_BASE + AR913X_EHCI_SIZE - 1; + ath79_ehci_device.name = "ar913x-ehci"; + platform_device_register(&ath79_ehci_device); +} + +void __init ath79_register_usb(void) +{ + if (soc_is_ar71xx()) + ath79_usb_setup(); + else if (soc_is_ar7240()) + ar7240_usb_setup(); + else if (soc_is_ar7241() || soc_is_ar7242()) + ar724x_usb_setup(); + else if (soc_is_ar913x()) + ar913x_usb_setup(); + else + BUG(); +} --- /dev/null +++ b/arch/mips/ath79/dev-usb.h @@ -0,0 +1,17 @@ +/* + * Atheros AR71XX/AR724X/AR913X USB Host Controller support + * + * Copyright (C) 2008-2010 Gabor Juhos + * Copyright (C) 2008 Imre Kaloz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _ATH79_DEV_USB_H +#define _ATH79_DEV_USB_H + +void ath79_register_usb(void); + +#endif /* _ATH79_DEV_USB_H */ --- a/arch/mips/ath79/mach-ap81.c +++ b/arch/mips/ath79/mach-ap81.c @@ -14,6 +14,7 @@ #include "dev-gpio-buttons.h" #include "dev-leds-gpio.h" #include "dev-spi.h" +#include "dev-usb.h" #define AP81_GPIO_LED_STATUS 1 #define AP81_GPIO_LED_AOSS 3 @@ -92,6 +93,7 @@ static void __init ap81_setup(void) ath79_register_spi(&ap81_spi_data, ap81_spi_info, ARRAY_SIZE(ap81_spi_info)); ath79_register_ar913x_wmac(cal_data); + ath79_register_usb(); } MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board", --- a/arch/mips/ath79/mach-pb44.c +++ b/arch/mips/ath79/mach-pb44.c @@ -18,6 +18,7 @@ #include "dev-gpio-buttons.h" #include "dev-leds-gpio.h" #include "dev-spi.h" +#include "dev-usb.h" #define PB44_GPIO_I2C_SCL 0 #define PB44_GPIO_I2C_SDA 1 @@ -112,6 +113,7 @@ static void __init pb44_init(void) pb44_gpio_keys); ath79_register_spi(&pb44_spi_data, pb44_spi_info, ARRAY_SIZE(pb44_spi_info)); + ath79_register_usb(); } MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board", --- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h @@ -20,6 +20,10 @@ #include #define AR71XX_APB_BASE 0x18000000 +#define AR71XX_EHCI_BASE 0x1b000000 +#define AR71XX_EHCI_SIZE 0x1000 +#define AR71XX_OHCI_BASE 0x1c000000 +#define AR71XX_OHCI_SIZE 0x1000 #define AR71XX_SPI_BASE 0x1f000000 #define AR71XX_SPI_SIZE 0x01000000 @@ -27,6 +31,8 @@ #define AR71XX_DDR_CTRL_SIZE 0x100 #define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000) #define AR71XX_UART_SIZE 0x100 +#define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) +#define AR71XX_USB_CTRL_SIZE 0x100 #define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000) #define AR71XX_GPIO_SIZE 0x100 #define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000) @@ -34,6 +40,16 @@ #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000) #define AR71XX_RESET_SIZE 0x100 +#define AR7240_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000) +#define AR7240_USB_CTRL_SIZE 0x100 +#define AR7240_OHCI_BASE 0x1b000000 +#define AR7240_OHCI_SIZE 0x1000 + +#define AR724X_EHCI_BASE 0x1b000000 +#define AR724X_EHCI_SIZE 0x1000 + +#define AR913X_EHCI_BASE 0x1b000000 +#define AR913X_EHCI_SIZE 0x1000 #define AR913X_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000) #define AR913X_WMAC_SIZE 0x30000 @@ -105,6 +121,12 @@ #define AR913X_AHB_DIV_MASK 0x1 /* + * USB_CONFIG block + */ +#define AR71XX_USB_CTRL_REG_FLADJ 0x00 +#define AR71XX_USB_CTRL_REG_CONFIG 0x04 + +/* * RESET block */ #define AR71XX_RESET_REG_TIMER 0x00 @@ -162,14 +184,22 @@ #define AR71XX_RESET_PCI_BUS BIT(1) #define AR71XX_RESET_PCI_CORE BIT(0) +#define AR7240_RESET_USB_HOST BIT(5) +#define AR7240_RESET_OHCI_DLL BIT(3) + #define AR724X_RESET_GE1_MDIO BIT(23) #define AR724X_RESET_GE0_MDIO BIT(22) #define AR724X_RESET_PCIE_PHY_SERIAL BIT(10) #define AR724X_RESET_PCIE_PHY BIT(7) #define AR724X_RESET_PCIE BIT(6) -#define AR724X_RESET_OHCI_DLL BIT(3) +#define AR724X_RESET_USB_HOST BIT(5) +#define AR724X_RESET_USB_PHY BIT(4) +#define AR724X_RESET_USBSUS_OVERRIDE BIT(3) #define AR913X_RESET_AMBA2WMAC BIT(22) +#define AR913X_RESET_USBSUS_OVERRIDE BIT(10) +#define AR913X_RESET_USB_HOST BIT(5) +#define AR913X_RESET_USB_PHY BIT(4) #define REV_ID_MAJOR_MASK 0xfff0 #define REV_ID_MAJOR_AR71XX 0x00a0