diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/au1xxx_irqmap.c linux-2.4.32-rc1.mips/arch/mips/au1000/common/au1xxx_irqmap.c --- linux-2.4.32-rc1/arch/mips/au1000/common/au1xxx_irqmap.c 2005-01-19 15:09:26.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/au1xxx_irqmap.c 2005-01-30 09:01:27.000000000 +0100 @@ -172,14 +172,14 @@ { AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0}, { AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0}, { AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1550_TOY_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1550_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1550_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1550_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, - { AU1550_RTC_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1550_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1550_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1550_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, + { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, { AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0}, { AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 }, @@ -200,14 +200,14 @@ { AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0}, { AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0}, { AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0}, - { AU1200_TOY_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1200_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1200_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1200_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, - { AU1200_RTC_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1200_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1200_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, - { AU1200_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 }, + { AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 }, + { AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 }, { AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0}, { AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 }, { AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0}, diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/cputable.c linux-2.4.32-rc1.mips/arch/mips/au1000/common/cputable.c --- linux-2.4.32-rc1/arch/mips/au1000/common/cputable.c 2005-01-19 15:09:26.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/cputable.c 2005-01-30 09:01:27.000000000 +0100 @@ -39,7 +39,8 @@ { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 }, { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 }, { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 }, - { 0xffffffff, 0x04030200, "Au1200 AA", 0, 1 }, + { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 }, + { 0xffffffff, 0x04030201, "Au1200 AC", 0, 0 }, { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 }, }; diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/dbdma.c linux-2.4.32-rc1.mips/arch/mips/au1000/common/dbdma.c --- linux-2.4.32-rc1/arch/mips/au1000/common/dbdma.c 2005-01-19 15:09:26.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/dbdma.c 2005-02-08 07:28:37.000000000 +0100 @@ -41,6 +41,8 @@ #include #include +#include + #if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) /* @@ -60,37 +62,10 @@ */ #define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1)) -static volatile dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE; -static int dbdma_initialized; +static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE; +static int dbdma_initialized=0; static void au1xxx_dbdma_init(void); -typedef struct dbdma_device_table { - u32 dev_id; - u32 dev_flags; - u32 dev_tsize; - u32 dev_devwidth; - u32 dev_physaddr; /* If FIFO */ - u32 dev_intlevel; - u32 dev_intpolarity; -} dbdev_tab_t; - -typedef struct dbdma_chan_config { - u32 chan_flags; - u32 chan_index; - dbdev_tab_t *chan_src; - dbdev_tab_t *chan_dest; - au1x_dma_chan_t *chan_ptr; - au1x_ddma_desc_t *chan_desc_base; - au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr; - void *chan_callparam; - void (*chan_callback)(int, void *, struct pt_regs *); -} chan_tab_t; - -#define DEV_FLAGS_INUSE (1 << 0) -#define DEV_FLAGS_ANYUSE (1 << 1) -#define DEV_FLAGS_OUT (1 << 2) -#define DEV_FLAGS_IN (1 << 3) - static dbdev_tab_t dbdev_tab[] = { #ifdef CONFIG_SOC_AU1550 /* UARTS */ @@ -156,13 +131,13 @@ { DSCR_CMD0_MAE_BOTH, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, { DSCR_CMD0_LCD, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_SDMS_TX0, DEV_FLAGS_OUT, 4, 8, 0x10600000, 0, 0 }, + { DSCR_CMD0_SDMS_RX0, DEV_FLAGS_IN, 4, 8, 0x10600004, 0, 0 }, + { DSCR_CMD0_SDMS_TX1, DEV_FLAGS_OUT, 4, 8, 0x10680000, 0, 0 }, + { DSCR_CMD0_SDMS_RX1, DEV_FLAGS_IN, 4, 8, 0x10680004, 0, 0 }, - { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_AES_RX, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_AES_RX, DEV_FLAGS_IN , 4, 32, 0x10300008, 0, 0 }, + { DSCR_CMD0_AES_TX, DEV_FLAGS_OUT, 4, 32, 0x10300004, 0, 0 }, { DSCR_CMD0_PSC0_TX, DEV_FLAGS_OUT, 0, 0, 0x11a0001c, 0, 0 }, { DSCR_CMD0_PSC0_RX, DEV_FLAGS_IN, 0, 0, 0x11a0001c, 0, 0 }, @@ -172,9 +147,9 @@ { DSCR_CMD0_PSC1_RX, DEV_FLAGS_IN, 0, 0, 0x11b0001c, 0, 0 }, { DSCR_CMD0_PSC1_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, - { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, + { DSCR_CMD0_CIM_RXA, DEV_FLAGS_IN, 0, 32, 0x14004020, 0, 0 }, + { DSCR_CMD0_CIM_RXB, DEV_FLAGS_IN, 0, 32, 0x14004040, 0, 0 }, + { DSCR_CMD0_CIM_RXC, DEV_FLAGS_IN, 0, 32, 0x14004060, 0, 0 }, { DSCR_CMD0_CIM_SYNC, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, { DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 }, @@ -183,6 +158,24 @@ { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, { DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }, + + /* Provide 16 user definable device types */ + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, + { 0, 0, 0, 0, 0, 0, 0 }, }; #define DBDEV_TAB_SIZE (sizeof(dbdev_tab) / sizeof(dbdev_tab_t)) @@ -202,6 +195,30 @@ return NULL; } +u32 +au1xxx_ddma_add_device(dbdev_tab_t *dev) +{ + u32 ret = 0; + dbdev_tab_t *p=NULL; + static u16 new_id=0x1000; + + p = find_dbdev_id(0); + if ( NULL != p ) + { + memcpy(p, dev, sizeof(dbdev_tab_t)); + p->dev_id = DSCR_DEV2CUSTOM_ID(new_id,dev->dev_id); + ret = p->dev_id; + new_id++; +#if 0 + printk("add_device: id:%x flags:%x padd:%x\n", + p->dev_id, p->dev_flags, p->dev_physaddr ); +#endif + } + + return ret; +} +EXPORT_SYMBOL(au1xxx_ddma_add_device); + /* Allocate a channel and return a non-zero descriptor if successful. */ u32 @@ -214,7 +231,7 @@ int i; dbdev_tab_t *stp, *dtp; chan_tab_t *ctp; - volatile au1x_dma_chan_t *cp; + au1x_dma_chan_t *cp; /* We do the intialization on the first channel allocation. * We have to wait because of the interrupt handler initialization @@ -224,9 +241,6 @@ au1xxx_dbdma_init(); dbdma_initialized = 1; - if ((srcid > DSCR_NDEV_IDS) || (destid > DSCR_NDEV_IDS)) - return 0; - if ((stp = find_dbdev_id(srcid)) == NULL) return 0; if ((dtp = find_dbdev_id(destid)) == NULL) return 0; @@ -268,9 +282,9 @@ /* If kmalloc fails, it is caught below same * as a channel not available. */ - ctp = (chan_tab_t *)kmalloc(sizeof(chan_tab_t), GFP_KERNEL); + ctp = (chan_tab_t *) + kmalloc(sizeof(chan_tab_t), GFP_KERNEL); chan_tab_ptr[i] = ctp; - ctp->chan_index = chan = i; break; } } @@ -278,10 +292,11 @@ if (ctp != NULL) { memset(ctp, 0, sizeof(chan_tab_t)); + ctp->chan_index = chan = i; dcp = DDMA_CHANNEL_BASE; dcp += (0x0100 * chan); ctp->chan_ptr = (au1x_dma_chan_t *)dcp; - cp = (volatile au1x_dma_chan_t *)dcp; + cp = (au1x_dma_chan_t *)dcp; ctp->chan_src = stp; ctp->chan_dest = dtp; ctp->chan_callback = callback; @@ -298,6 +313,9 @@ i |= DDMA_CFG_DED; if (dtp->dev_intpolarity) i |= DDMA_CFG_DP; + if ((stp->dev_flags & DEV_FLAGS_SYNC) || + (dtp->dev_flags & DEV_FLAGS_SYNC)) + i |= DDMA_CFG_SYNC; cp->ddma_cfg = i; au_sync(); @@ -308,14 +326,14 @@ rv = (u32)(&chan_tab_ptr[chan]); } else { - /* Release devices. - */ + /* Release devices */ stp->dev_flags &= ~DEV_FLAGS_INUSE; dtp->dev_flags &= ~DEV_FLAGS_INUSE; } } return rv; } +EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc); /* Set the device width if source or destination is a FIFO. * Should be 8, 16, or 32 bits. @@ -343,6 +361,7 @@ return rv; } +EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth); /* Allocate a descriptor ring, initializing as much as possible. */ @@ -369,7 +388,8 @@ * and if we try that first we are likely to not waste larger * slabs of memory. */ - desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), GFP_KERNEL); + desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), + GFP_KERNEL|GFP_DMA); if (desc_base == 0) return 0; @@ -380,7 +400,7 @@ kfree((const void *)desc_base); i = entries * sizeof(au1x_ddma_desc_t); i += (sizeof(au1x_ddma_desc_t) - 1); - if ((desc_base = (u32)kmalloc(i, GFP_KERNEL)) == 0) + if ((desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA)) == 0) return 0; desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t)); @@ -460,9 +480,14 @@ /* If source input is fifo, set static address. */ if (stp->dev_flags & DEV_FLAGS_IN) { - src0 = stp->dev_physaddr; - src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC); + if ( stp->dev_flags & DEV_FLAGS_BURSTABLE ) + src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST); + else + src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC); + } + if (stp->dev_physaddr) + src0 = stp->dev_physaddr; /* Set up dest1. For now, assume no stride and increment. * A channel attribute update can change this later. @@ -486,10 +511,18 @@ /* If destination output is fifo, set static address. */ if (dtp->dev_flags & DEV_FLAGS_OUT) { - dest0 = dtp->dev_physaddr; + if ( dtp->dev_flags & DEV_FLAGS_BURSTABLE ) + dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST); + else dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC); } + if (dtp->dev_physaddr) + dest0 = dtp->dev_physaddr; +#if 0 + printk("did:%x sid:%x cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n", + dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, src1, dest0, dest1 ); +#endif for (i=0; idscr_cmd0 = cmd0; dp->dscr_cmd1 = cmd1; @@ -498,6 +531,7 @@ dp->dscr_dest0 = dest0; dp->dscr_dest1 = dest1; dp->dscr_stat = 0; + dp->sw_context = dp->sw_status = 0; dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(dp + 1)); dp++; } @@ -510,13 +544,14 @@ return (u32)(ctp->chan_desc_base); } +EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc); /* Put a source buffer into the DMA ring. * This updates the source pointer and byte count. Normally used * for memory to fifo transfers. */ u32 -au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes) +_au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) { chan_tab_t *ctp; au1x_ddma_desc_t *dp; @@ -543,24 +578,40 @@ */ dp->dscr_source0 = virt_to_phys(buf); dp->dscr_cmd1 = nbytes; - dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ - ctp->chan_ptr->ddma_dbell = 0xffffffff; /* Make it go */ - + /* Check flags */ + if (flags & DDMA_FLAGS_IE) + dp->dscr_cmd0 |= DSCR_CMD0_IE; + if (flags & DDMA_FLAGS_NOIE) + dp->dscr_cmd0 &= ~DSCR_CMD0_IE; /* Get next descriptor pointer. */ ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + /* + * There is an errata on the Au1200/Au1550 parts that could result + * in "stale" data being DMA'd. It has to do with the snoop logic on + * the dache eviction buffer. NONCOHERENT_IO is on by default for + * these parts. If it is fixedin the future, these dma_cache_inv will + * just be nothing more than empty macros. See io.h. + * */ + dma_cache_wback_inv(buf,nbytes); + dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ + au_sync(); + dma_cache_wback_inv(dp, sizeof(dp)); + ctp->chan_ptr->ddma_dbell = 0; + /* return something not zero. */ return nbytes; } +EXPORT_SYMBOL(_au1xxx_dbdma_put_source); /* Put a destination buffer into the DMA ring. * This updates the destination pointer and byte count. Normally used * to place an empty buffer into the ring for fifo to memory transfers. */ u32 -au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes) +_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags) { chan_tab_t *ctp; au1x_ddma_desc_t *dp; @@ -582,11 +633,33 @@ if (dp->dscr_cmd0 & DSCR_CMD0_V) return 0; - /* Load up buffer address and byte count. - */ + /* Load up buffer address and byte count */ + + /* Check flags */ + if (flags & DDMA_FLAGS_IE) + dp->dscr_cmd0 |= DSCR_CMD0_IE; + if (flags & DDMA_FLAGS_NOIE) + dp->dscr_cmd0 &= ~DSCR_CMD0_IE; + dp->dscr_dest0 = virt_to_phys(buf); dp->dscr_cmd1 = nbytes; +#if 0 + printk("cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n", + dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0, + dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1 ); +#endif + /* + * There is an errata on the Au1200/Au1550 parts that could result in + * "stale" data being DMA'd. It has to do with the snoop logic on the + * dache eviction buffer. NONCOHERENT_IO is on by default for these + * parts. If it is fixedin the future, these dma_cache_inv will just + * be nothing more than empty macros. See io.h. + * */ + dma_cache_inv(buf,nbytes); dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */ + au_sync(); + dma_cache_wback_inv(dp, sizeof(dp)); + ctp->chan_ptr->ddma_dbell = 0; /* Get next descriptor pointer. */ @@ -596,6 +669,7 @@ */ return nbytes; } +EXPORT_SYMBOL(_au1xxx_dbdma_put_dest); /* Get a destination buffer into the DMA ring. * Normally used to get a full buffer from the ring during fifo @@ -645,7 +719,7 @@ au1xxx_dbdma_stop(u32 chanid) { chan_tab_t *ctp; - volatile au1x_dma_chan_t *cp; + au1x_dma_chan_t *cp; int halt_timeout = 0; ctp = *((chan_tab_t **)chanid); @@ -665,6 +739,7 @@ cp->ddma_stat |= (DDMA_STAT_DB | DDMA_STAT_V); au_sync(); } +EXPORT_SYMBOL(au1xxx_dbdma_stop); /* Start using the current descriptor pointer. If the dbdma encounters * a not valid descriptor, it will stop. In this case, we can just @@ -674,17 +749,17 @@ au1xxx_dbdma_start(u32 chanid) { chan_tab_t *ctp; - volatile au1x_dma_chan_t *cp; + au1x_dma_chan_t *cp; ctp = *((chan_tab_t **)chanid); - cp = ctp->chan_ptr; cp->ddma_desptr = virt_to_phys(ctp->cur_ptr); cp->ddma_cfg |= DDMA_CFG_EN; /* Enable channel */ au_sync(); - cp->ddma_dbell = 0xffffffff; /* Make it go */ + cp->ddma_dbell = 0; au_sync(); } +EXPORT_SYMBOL(au1xxx_dbdma_start); void au1xxx_dbdma_reset(u32 chanid) @@ -703,15 +778,21 @@ do { dp->dscr_cmd0 &= ~DSCR_CMD0_V; + /* reset our SW status -- this is used to determine + * if a descriptor is in use by upper level SW. Since + * posting can reset 'V' bit. + */ + dp->sw_status = 0; dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); } while (dp != ctp->chan_desc_base); } +EXPORT_SYMBOL(au1xxx_dbdma_reset); u32 au1xxx_get_dma_residue(u32 chanid) { chan_tab_t *ctp; - volatile au1x_dma_chan_t *cp; + au1x_dma_chan_t *cp; u32 rv; ctp = *((chan_tab_t **)chanid); @@ -746,15 +827,16 @@ kfree(ctp); } +EXPORT_SYMBOL(au1xxx_dbdma_chan_free); static void dbdma_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - u32 intstat; + u32 intstat, flags; u32 chan_index; chan_tab_t *ctp; au1x_ddma_desc_t *dp; - volatile au1x_dma_chan_t *cp; + au1x_dma_chan_t *cp; intstat = dbdma_gptr->ddma_intstat; au_sync(); @@ -773,18 +855,26 @@ (ctp->chan_callback)(irq, ctp->chan_callparam, regs); ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); - } -static void -au1xxx_dbdma_init(void) +static void au1xxx_dbdma_init(void) { + int irq_nr; + dbdma_gptr->ddma_config = 0; dbdma_gptr->ddma_throttle = 0; dbdma_gptr->ddma_inten = 0xffff; au_sync(); - if (request_irq(AU1550_DDMA_INT, dbdma_interrupt, SA_INTERRUPT, +#if defined(CONFIG_SOC_AU1550) + irq_nr = AU1550_DDMA_INT; +#elif defined(CONFIG_SOC_AU1200) + irq_nr = AU1200_DDMA_INT; +#else + #error Unknown Au1x00 SOC +#endif + + if (request_irq(irq_nr, dbdma_interrupt, SA_INTERRUPT, "Au1xxx dbdma", (void *)dbdma_gptr)) printk("Can't get 1550 dbdma irq"); } @@ -795,7 +885,8 @@ chan_tab_t *ctp; au1x_ddma_desc_t *dp; dbdev_tab_t *stp, *dtp; - volatile au1x_dma_chan_t *cp; + au1x_dma_chan_t *cp; + u32 i = 0; ctp = *((chan_tab_t **)chanid); stp = ctp->chan_src; @@ -820,15 +911,64 @@ dp = ctp->chan_desc_base; do { - printk("dp %08x, cmd0 %08x, cmd1 %08x\n", - (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1); - printk("src0 %08x, src1 %08x, dest0 %08x\n", - dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0); - printk("dest1 %08x, stat %08x, nxtptr %08x\n", - dp->dscr_dest1, dp->dscr_stat, dp->dscr_nxtptr); + printk("Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n", + i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1); + printk("src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n", + dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1); + printk("stat %08x, nxtptr %08x\n", + dp->dscr_stat, dp->dscr_nxtptr); dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); } while (dp != ctp->chan_desc_base); } +/* Put a descriptor into the DMA ring. + * This updates the source/destination pointers and byte count. + */ +u32 +au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr ) +{ + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + u32 nbytes=0; + + /* I guess we could check this to be within the + * range of the table...... + */ + ctp = *((chan_tab_t **)chanid); + + /* We should have multiple callers for a particular channel, + * an interrupt doesn't affect this pointer nor the descriptor, + * so no locking should be needed. + */ + dp = ctp->put_ptr; + + /* If the descriptor is valid, we are way ahead of the DMA + * engine, so just return an error condition. + */ + if (dp->dscr_cmd0 & DSCR_CMD0_V) + return 0; + + /* Load up buffer addresses and byte count. + */ + dp->dscr_dest0 = dscr->dscr_dest0; + dp->dscr_source0 = dscr->dscr_source0; + dp->dscr_dest1 = dscr->dscr_dest1; + dp->dscr_source1 = dscr->dscr_source1; + dp->dscr_cmd1 = dscr->dscr_cmd1; + nbytes = dscr->dscr_cmd1; + /* Allow the caller to specifiy if an interrupt is generated */ + dp->dscr_cmd0 &= ~DSCR_CMD0_IE; + dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V; + ctp->chan_ptr->ddma_dbell = 0; + + /* Get next descriptor pointer. + */ + ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); + + /* return something not zero. + */ + return nbytes; +} + #endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */ diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/gpio.c linux-2.4.32-rc1.mips/arch/mips/au1000/common/gpio.c --- linux-2.4.32-rc1/arch/mips/au1000/common/gpio.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/gpio.c 2005-01-30 09:01:27.000000000 +0100 @@ -0,0 +1,118 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include + +#define gpio1 sys +#if !defined(CONFIG_SOC_AU1000) +static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE; + +#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000 + +int au1xxx_gpio2_read(int signal) +{ + signal -= 200; +/* gpio2->dir &= ~(0x01 << signal); //Set GPIO to input */ + return ((gpio2->pinstate >> signal) & 0x01); +} + +void au1xxx_gpio2_write(int signal, int value) +{ + signal -= 200; + + gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) | + (value << signal); +} + +void au1xxx_gpio2_tristate(int signal) +{ + signal -= 200; + gpio2->dir &= ~(0x01 << signal); /* Set GPIO to input */ +} +#endif + +int au1xxx_gpio1_read(int signal) +{ +/* gpio1->trioutclr |= (0x01 << signal); */ + return ((gpio1->pinstaterd >> signal) & 0x01); +} + +void au1xxx_gpio1_write(int signal, int value) +{ + if(value) + gpio1->outputset = (0x01 << signal); + else + gpio1->outputclr = (0x01 << signal); /* Output a Zero */ +} + +void au1xxx_gpio1_tristate(int signal) +{ + gpio1->trioutclr = (0x01 << signal); /* Tristate signal */ +} + + +int au1xxx_gpio_read(int signal) +{ + if(signal >= 200) +#if defined(CONFIG_SOC_AU1000) + return 0; +#else + return au1xxx_gpio2_read(signal); +#endif + else + return au1xxx_gpio1_read(signal); +} + +void au1xxx_gpio_write(int signal, int value) +{ + if(signal >= 200) +#if defined(CONFIG_SOC_AU1000) + ; +#else + au1xxx_gpio2_write(signal, value); +#endif + else + au1xxx_gpio1_write(signal, value); +} + +void au1xxx_gpio_tristate(int signal) +{ + if(signal >= 200) +#if defined(CONFIG_SOC_AU1000) + ; +#else + au1xxx_gpio2_tristate(signal); +#endif + else + au1xxx_gpio1_tristate(signal); +} + +void au1xxx_gpio1_set_inputs(void) +{ + gpio1->pininputen = 0; +} + +EXPORT_SYMBOL(au1xxx_gpio1_set_inputs); +EXPORT_SYMBOL(au1xxx_gpio_tristate); +EXPORT_SYMBOL(au1xxx_gpio_write); +EXPORT_SYMBOL(au1xxx_gpio_read); diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/irq.c linux-2.4.32-rc1.mips/arch/mips/au1000/common/irq.c --- linux-2.4.32-rc1/arch/mips/au1000/common/irq.c 2005-01-19 15:09:26.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/irq.c 2005-03-13 08:56:57.000000000 +0100 @@ -303,8 +303,30 @@ }; #ifdef CONFIG_PM -void startup_match20_interrupt(void) +void startup_match20_interrupt(void (*handler)(int, void *, struct pt_regs *)) { + static struct irqaction action; + /* This is a big problem.... since we didn't use request_irq + when kernel/irq.c calls probe_irq_xxx this interrupt will + be probed for usage. This will end up disabling the device :( + + Give it a bogus "action" pointer -- this will keep it from + getting auto-probed! + + By setting the status to match that of request_irq() we + can avoid it. --cgray + */ + action.dev_id = handler; + action.flags = 0; + action.mask = 0; + action.name = "Au1xxx TOY"; + action.handler = handler; + action.next = NULL; + + irq_desc[AU1000_TOY_MATCH2_INT].action = &action; + irq_desc[AU1000_TOY_MATCH2_INT].status + &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS); + local_enable_irq(AU1000_TOY_MATCH2_INT); } #endif @@ -508,6 +530,7 @@ if (!intc0_req0) return; +#ifdef AU1000_USB_DEV_REQ_INT /* * Because of the tight timing of SETUP token to reply * transactions, the USB devices-side packet complete @@ -518,6 +541,7 @@ do_IRQ(AU1000_USB_DEV_REQ_INT, regs); return; } +#endif irq = au_ffs(intc0_req0) - 1; intc0_req0 &= ~(1<bus->number; unsigned int dev_fn = dev->devfn; @@ -170,7 +171,6 @@ unsigned long offset, status; unsigned long cfg_base; unsigned long flags; - int error = PCIBIOS_SUCCESSFUL; unsigned long entryLo0, entryLo1; if (device > 19) { @@ -205,9 +205,8 @@ last_entryLo0 = last_entryLo1 = 0xffffffff; } - /* Since the Au1xxx doesn't do the idsel timing exactly to spec, - * many board vendors implement their own off-chip idsel, so call - * it now. If it doesn't succeed, may as well bail out at this point. + /* Allow board vendors to implement their own off-chip idsel. + * If it doesn't succeed, may as well bail out at this point. */ if (board_pci_idsel) { if (board_pci_idsel(device, 1) == 0) { @@ -271,8 +270,11 @@ } local_irq_restore(flags); - return error; +#else + /* Fake out Config space access with no responder */ + *data = 0xFFFFFFFF; #endif + return error; } #endif diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/power.c linux-2.4.32-rc1.mips/arch/mips/au1000/common/power.c --- linux-2.4.32-rc1/arch/mips/au1000/common/power.c 2005-01-19 15:09:26.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/power.c 2005-04-07 02:37:19.000000000 +0200 @@ -50,7 +50,6 @@ static void calibrate_delay(void); -extern void set_au1x00_speed(unsigned int new_freq); extern unsigned int get_au1x00_speed(void); extern unsigned long get_au1x00_uart_baud_base(void); extern void set_au1x00_uart_baud_base(unsigned long new_baud_base); @@ -116,6 +115,7 @@ sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK); sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL); +#ifndef CONFIG_SOC_AU1200 /* Shutdown USB host/device. */ sleep_usbhost_enable = au_readl(USB_HOST_CONFIG); @@ -127,6 +127,7 @@ sleep_usbdev_enable = au_readl(USBD_ENABLE); au_writel(0, USBD_ENABLE); au_sync(); +#endif /* Save interrupt controller state. */ @@ -212,14 +213,12 @@ int au_sleep(void) { unsigned long wakeup, flags; - extern void save_and_sleep(void); + extern unsigned int save_and_sleep(void); spin_lock_irqsave(&pm_lock,flags); save_core_regs(); - flush_cache_all(); - /** The code below is all system dependent and we should probably ** have a function call out of here to set this up. You need ** to configure the GPIO or timer interrupts that will bring @@ -227,27 +226,26 @@ ** For testing, the TOY counter wakeup is useful. **/ -#if 0 +#if 1 au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD); /* gpio 6 can cause a wake up event */ wakeup = au_readl(SYS_WAKEMSK); wakeup &= ~(1 << 8); /* turn off match20 wakeup */ - wakeup |= 1 << 6; /* turn on gpio 6 wakeup */ + wakeup = 1 << 5; /* turn on gpio 6 wakeup */ #else - /* For testing, allow match20 to wake us up. - */ + /* For testing, allow match20 to wake us up. */ #ifdef SLEEP_TEST_TIMEOUT wakeup_counter0_set(sleep_ticks); #endif wakeup = 1 << 8; /* turn on match20 wakeup */ wakeup = 0; #endif - au_writel(1, SYS_WAKESRC); /* clear cause */ + au_writel(0, SYS_WAKESRC); /* clear cause */ au_sync(); au_writel(wakeup, SYS_WAKEMSK); au_sync(); - + DPRINTK("Entering sleep!\n"); save_and_sleep(); /* after a wakeup, the cpu vectors back to 0x1fc00000 so @@ -255,6 +253,7 @@ */ restore_core_regs(); spin_unlock_irqrestore(&pm_lock, flags); + DPRINTK("Leaving sleep!\n"); return 0; } @@ -285,7 +284,6 @@ if (retval) return retval; - au_sleep(); retval = pm_send_all(PM_RESUME, (void *) 0); } @@ -296,7 +294,6 @@ void *buffer, size_t * len) { int retval = 0; - void au1k_wait(void); if (!write) { *len = 0; @@ -305,119 +302,9 @@ if (retval) return retval; suspend_mode = 1; - au1k_wait(); - retval = pm_send_all(PM_RESUME, (void *) 0); - } - return retval; -} - -static int pm_do_freq(ctl_table * ctl, int write, struct file *file, - void *buffer, size_t * len) -{ - int retval = 0, i; - unsigned long val, pll; -#define TMPBUFLEN 64 -#define MAX_CPU_FREQ 396 - char buf[TMPBUFLEN], *p; - unsigned long flags, intc0_mask, intc1_mask; - unsigned long old_baud_base, old_cpu_freq, baud_rate, old_clk, - old_refresh; - unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh; - - spin_lock_irqsave(&pm_lock, flags); - if (!write) { - *len = 0; - } else { - /* Parse the new frequency */ - if (*len > TMPBUFLEN - 1) { - spin_unlock_irqrestore(&pm_lock, flags); - return -EFAULT; - } - if (copy_from_user(buf, buffer, *len)) { - spin_unlock_irqrestore(&pm_lock, flags); - return -EFAULT; - } - buf[*len] = 0; - p = buf; - val = simple_strtoul(p, &p, 0); - if (val > MAX_CPU_FREQ) { - spin_unlock_irqrestore(&pm_lock, flags); - return -EFAULT; - } - - pll = val / 12; - if ((pll > 33) || (pll < 7)) { /* 396 MHz max, 84 MHz min */ - /* revisit this for higher speed cpus */ - spin_unlock_irqrestore(&pm_lock, flags); - return -EFAULT; - } - - old_baud_base = get_au1x00_uart_baud_base(); - old_cpu_freq = get_au1x00_speed(); - - new_cpu_freq = pll * 12 * 1000000; - new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16)); - set_au1x00_speed(new_cpu_freq); - set_au1x00_uart_baud_base(new_baud_base); - - old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff; - new_refresh = - ((old_refresh * new_cpu_freq) / - old_cpu_freq) | (au_readl(MEM_SDREFCFG) & ~0x1ffffff); - - au_writel(pll, SYS_CPUPLL); - au_sync_delay(1); - au_writel(new_refresh, MEM_SDREFCFG); - au_sync_delay(1); - - for (i = 0; i < 4; i++) { - if (au_readl - (UART_BASE + UART_MOD_CNTRL + - i * 0x00100000) == 3) { - old_clk = - au_readl(UART_BASE + UART_CLK + - i * 0x00100000); - // baud_rate = baud_base/clk - baud_rate = old_baud_base / old_clk; - /* we won't get an exact baud rate and the error - * could be significant enough that our new - * calculation will result in a clock that will - * give us a baud rate that's too far off from - * what we really want. - */ - if (baud_rate > 100000) - baud_rate = 115200; - else if (baud_rate > 50000) - baud_rate = 57600; - else if (baud_rate > 30000) - baud_rate = 38400; - else if (baud_rate > 17000) - baud_rate = 19200; - else - (baud_rate = 9600); - // new_clk = new_baud_base/baud_rate - new_clk = new_baud_base / baud_rate; - au_writel(new_clk, - UART_BASE + UART_CLK + - i * 0x00100000); - au_sync_delay(10); - } - } + retval = pm_send_all(PM_RESUME, (void *) 0); } - - - /* We don't want _any_ interrupts other than - * match20. Otherwise our calibrate_delay() - * calculation will be off, potentially a lot. - */ - intc0_mask = save_local_and_disable(0); - intc1_mask = save_local_and_disable(1); - local_enable_irq(AU1000_TOY_MATCH2_INT); - spin_unlock_irqrestore(&pm_lock, flags); - calibrate_delay(); - restore_local_and_enable(0, intc0_mask); - restore_local_and_enable(1, intc1_mask); return retval; } @@ -425,7 +312,6 @@ static struct ctl_table pm_table[] = { {ACPI_S1_SLP_TYP, "suspend", NULL, 0, 0600, NULL, &pm_do_suspend}, {ACPI_SLEEP, "sleep", NULL, 0, 0600, NULL, &pm_do_sleep}, - {CTL_ACPI, "freq", NULL, 0, 0600, NULL, &pm_do_freq}, {0} }; diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/reset.c linux-2.4.32-rc1.mips/arch/mips/au1000/common/reset.c --- linux-2.4.32-rc1/arch/mips/au1000/common/reset.c 2005-01-19 15:09:26.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/reset.c 2005-03-19 08:17:51.000000000 +0100 @@ -37,8 +37,6 @@ #include #include -extern int au_sleep(void); - void au1000_restart(char *command) { /* Set all integrated peripherals to disabled states */ @@ -144,6 +142,26 @@ au_writel(0x00, 0xb1900064); /* sys_auxpll */ au_writel(0x00, 0xb1900100); /* sys_pininputen */ break; + case 0x04000000: /* Au1200 */ + au_writel(0x00, 0xb400300c); /* ddma */ + au_writel(0x00, 0xb1a00004); /* psc 0 */ + au_writel(0x00, 0xb1b00004); /* psc 1 */ + au_writel(0x00d02000, 0xb4020004); /* ehci, ohci, udc, otg */ + au_writel(0x00, 0xb5000004); /* lcd */ + au_writel(0x00, 0xb060000c); /* sd0 */ + au_writel(0x00, 0xb068000c); /* sd1 */ + au_writel(0x00, 0xb1100100); /* swcnt */ + au_writel(0x00, 0xb0300000); /* aes */ + au_writel(0x00, 0xb4004000); /* cim */ + au_writel(0x00, 0xb1100100); /* uart0_enable */ + au_writel(0x00, 0xb1200100); /* uart1_enable */ + au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ + au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ + au_writel(0x00, 0xb1900028); /* sys_clksrc */ + au_writel(0x10, 0xb1900060); /* sys_cpupll */ + au_writel(0x00, 0xb1900064); /* sys_auxpll */ + au_writel(0x00, 0xb1900100); /* sys_pininputen */ + break; default: break; @@ -163,32 +181,23 @@ void au1000_halt(void) { -#if defined(CONFIG_MIPS_PB1550) - /* power off system */ - printk("\n** Powering off Pb1550\n"); - au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C); - au_sync(); - while(1); /* should not get here */ -#endif - printk(KERN_NOTICE "\n** You can safely turn off the power\n"); -#ifdef CONFIG_MIPS_MIRAGE - au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT); -#endif -#ifdef CONFIG_PM - au_sleep(); - - /* should not get here */ - printk(KERN_ERR "Unable to put cpu in sleep mode\n"); - while(1); -#else - while (1) + /* Use WAIT in a low-power infinite spin loop */ + while (1) { __asm__(".set\tmips3\n\t" "wait\n\t" ".set\tmips0"); -#endif + } } void au1000_power_off(void) { + extern void board_power_off (void); + + printk(KERN_NOTICE "\n** You can safely turn off the power\n"); + + /* Give board a chance to power-off */ + board_power_off(); + + /* If board can't power-off, spin forever */ au1000_halt(); } diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/setup.c linux-2.4.32-rc1.mips/arch/mips/au1000/common/setup.c --- linux-2.4.32-rc1/arch/mips/au1000/common/setup.c 2005-01-19 15:09:26.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/setup.c 2005-01-30 09:01:27.000000000 +0100 @@ -174,6 +174,40 @@ initrd_end = (unsigned long)&__rd_end; #endif +#if defined(CONFIG_SOC_AU1200) +#ifdef CONFIG_USB_EHCI_HCD + if ((argptr = strstr(argptr, "usb_ehci=")) == NULL) { + char usb_args[80]; + argptr = prom_getcmdline(); + memset(usb_args, 0, sizeof(usb_args)); + sprintf(usb_args, " usb_ehci=base:0x%x,len:0x%x,irq:%d", + USB_EHCI_BASE, USB_EHCI_LEN, AU1000_USB_HOST_INT); + strcat(argptr, usb_args); + } +#ifdef CONFIG_USB_AMD5536UDC + /* enable EHC + OHC + UDC clocks, memory and bus mastering */ +/* au_writel( 0x00DF207F, USB_MSR_BASE + 4); */ + au_writel( 0xC0DF207F, USB_MSR_BASE + 4); // incl. prefetch +#else + /* enable EHC + OHC clocks, memory and bus mastering */ +/* au_writel( 0x00DB200F, USB_MSR_BASE + 4); */ + au_writel( 0xC0DB200F, USB_MSR_BASE + 4); /* incl. prefetch */ +#endif + udelay(1000); + +#else /* CONFIG_USB_EHCI_HCD */ + +#ifdef CONFIG_USB_AMD5536UDC +#ifndef CONFIG_USB_OHCI + /* enable UDC clocks, memory and bus mastering */ +/* au_writel( 0x00DC2070, USB_MSR_BASE + 4); */ + au_writel( 0xC0DC2070, USB_MSR_BASE + 4); // incl. prefetch + udelay(1000); +#endif +#endif +#endif /* CONFIG_USB_EHCI_HCD */ +#endif /* CONFIG_SOC_AU1200 */ + #if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE) #ifdef CONFIG_USB_OHCI if ((argptr = strstr(argptr, "usb_ohci=")) == NULL) { @@ -187,19 +221,38 @@ #endif #ifdef CONFIG_USB_OHCI - // enable host controller and wait for reset done +#if defined(CONFIG_SOC_AU1200) +#ifndef CONFIG_USB_EHCI_HCD +#ifdef CONFIG_USB_AMD5536UDC + /* enable OHC + UDC clocks, memory and bus mastering */ +/* au_writel( 0x00DD2073, USB_MSR_BASE + 4); */ + au_writel( 0xC0DD2073, USB_MSR_BASE + 4); // incl. prefetch +#else + /* enable OHC clocks, memory and bus mastering */ + au_writel( 0x00D12003, USB_MSR_BASE + 4); +#endif + udelay(1000); +printk("DEBUG: Reading Au1200 USB2 reg 0x%x\n", au_readl(USB_MSR_BASE + 4)); +#endif +#else + /* Au1000, Au1500, Au1100, Au1550 */ + /* enable host controller and wait for reset done */ au_writel(0x08, USB_HOST_CONFIG); udelay(1000); au_writel(0x0E, USB_HOST_CONFIG); udelay(1000); - au_readl(USB_HOST_CONFIG); // throw away first read + au_readl(USB_HOST_CONFIG); /* throw away first read */ while (!(au_readl(USB_HOST_CONFIG) & 0x10)) au_readl(USB_HOST_CONFIG); +#endif /* CONFIG_SOC_AU1200 */ #endif -#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE) +#else + +#endif /* defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE) */ + #ifdef CONFIG_FB - // Needed if PCI video card in use + /* Needed if PCI video card in use */ conswitchp = &dummy_con; #endif @@ -209,8 +262,7 @@ #endif #ifdef CONFIG_BLK_DEV_IDE - /* Board setup takes precedence for unique devices. - */ + /* Board setup takes precedence for unique devices. */ if ((ide_ops == NULL) || (ide_ops == &no_ide_ops)) ide_ops = &std_ide_ops; #endif diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/sleeper.S linux-2.4.32-rc1.mips/arch/mips/au1000/common/sleeper.S --- linux-2.4.32-rc1/arch/mips/au1000/common/sleeper.S 2004-02-18 14:36:30.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/sleeper.S 2005-01-30 09:01:27.000000000 +0100 @@ -15,17 +15,48 @@ #include #include #include +#include + +/* + * Note: This file is *not* conditional on CONFIG_PM since Alchemy sleep + * need not be tied to any particular power management scheme. + */ + + .extern ___flush_cache_all .text - .set macro - .set noat .align 5 -/* Save all of the processor general registers and go to sleep. - * A wakeup condition will get us back here to restore the registers. +/* + * Save the processor general registers and go to sleep. A wakeup + * condition will get us back here to restore the registers. */ -LEAF(save_and_sleep) +/* still need to fix alignment issues here */ +save_and_sleep_frmsz = 48 +NESTED(save_and_sleep, save_and_sleep_frmsz, ra) + .set noreorder + .set nomacro + .set noat + subu sp, save_and_sleep_frmsz + sw ra, save_and_sleep_frmsz-4(sp) + sw s0, save_and_sleep_frmsz-8(sp) + sw s1, save_and_sleep_frmsz-12(sp) + sw s2, save_and_sleep_frmsz-16(sp) + sw s3, save_and_sleep_frmsz-20(sp) + sw s4, save_and_sleep_frmsz-24(sp) + sw s5, save_and_sleep_frmsz-28(sp) + sw s6, save_and_sleep_frmsz-32(sp) + sw s7, save_and_sleep_frmsz-36(sp) + sw s8, save_and_sleep_frmsz-40(sp) + sw gp, save_and_sleep_frmsz-44(sp) + + /* We only need to save the registers that the calling function + * hasn't saved for us. 0 is always zero. 8 - 15, 24 and 25 are + * temporaries and can be used without saving. 26 and 27 are reserved + * for interrupt/trap handling and expected to change. 29 is the + * stack pointer which is handled as a special case here. + */ subu sp, PT_SIZE sw $1, PT_R1(sp) sw $2, PT_R2(sp) @@ -34,14 +65,6 @@ sw $5, PT_R5(sp) sw $6, PT_R6(sp) sw $7, PT_R7(sp) - sw $8, PT_R8(sp) - sw $9, PT_R9(sp) - sw $10, PT_R10(sp) - sw $11, PT_R11(sp) - sw $12, PT_R12(sp) - sw $13, PT_R13(sp) - sw $14, PT_R14(sp) - sw $15, PT_R15(sp) sw $16, PT_R16(sp) sw $17, PT_R17(sp) sw $18, PT_R18(sp) @@ -50,32 +73,47 @@ sw $21, PT_R21(sp) sw $22, PT_R22(sp) sw $23, PT_R23(sp) - sw $24, PT_R24(sp) - sw $25, PT_R25(sp) - sw $26, PT_R26(sp) - sw $27, PT_R27(sp) sw $28, PT_R28(sp) - sw $29, PT_R29(sp) sw $30, PT_R30(sp) sw $31, PT_R31(sp) +#define PT_C0STATUS PT_LO +#define PT_CONTEXT PT_HI +#define PT_PAGEMASK PT_EPC +#define PT_CONFIG PT_BVADDR mfc0 k0, CP0_STATUS - sw k0, 0x20(sp) + sw k0, PT_C0STATUS(sp) // 0x20 mfc0 k0, CP0_CONTEXT - sw k0, 0x1c(sp) + sw k0, PT_CONTEXT(sp) // 0x1c mfc0 k0, CP0_PAGEMASK - sw k0, 0x18(sp) + sw k0, PT_PAGEMASK(sp) // 0x18 mfc0 k0, CP0_CONFIG - sw k0, 0x14(sp) + sw k0, PT_CONFIG(sp) // 0x14 + + .set macro + .set at + + li t0, SYS_SLPPWR + sw zero, 0(t0) /* Get the processor ready to sleep */ + sync /* Now set up the scratch registers so the boot rom will * return to this point upon wakeup. + * sys_scratch0 : SP + * sys_scratch1 : RA + */ + li t0, SYS_SCRATCH0 + li t1, SYS_SCRATCH1 + sw sp, 0(t0) + la k0, resume_from_sleep + sw k0, 0(t1) + +/* + * Flush DCACHE to make sure context is in memory */ - la k0, 1f - lui k1, 0xb190 - ori k1, 0x18 - sw sp, 0(k1) - ori k1, 0x1c - sw k0, 0(k1) + la t1,___flush_cache_all /* _flush_cache_all is a function pointer */ + lw t0,0(t1) + jal t0 + nop /* Put SDRAM into self refresh. Preload instructions into cache, * issue a precharge, then auto refresh, then sleep commands to it. @@ -88,30 +126,65 @@ cache 0x14, 96(t0) .set mips0 + /* Put SDRAM to sleep */ sdsleep: - lui k0, 0xb400 - sw zero, 0x001c(k0) /* Precharge */ - sw zero, 0x0020(k0) /* Auto refresh */ - sw zero, 0x0030(k0) /* SDRAM sleep */ + li a0, MEM_PHYS_ADDR + or a0, a0, 0xA0000000 +#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100) || defined(CONFIG_SOC_AU1500) + lw k0, MEM_SDMODE0(a0) + sw zero, MEM_SDPRECMD(a0) /* Precharge */ + sw zero, MEM_SDAUTOREF(a0) /* Auto Refresh */ + sw zero, MEM_SDSLEEP(a0) /* Sleep */ sync - - lui k1, 0xb190 - sw zero, 0x0078(k1) /* get ready to sleep */ +#endif +#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) + sw zero, MEM_SDPRECMD(a0) /* Precharge */ + sw zero, MEM_SDSREF(a0) + + #lw t0, MEM_SDSTAT(a0) + #and t0, t0, 0x01000000 + li t0, 0x01000000 +refresh_not_set: + lw t1, MEM_SDSTAT(a0) + and t2, t1, t0 + beq zero, t2, refresh_not_set + nop + + li t0, ~0x30000000 + lw t1, MEM_SDCONFIGA(a0) + and t1, t0, t1 + sw t1, MEM_SDCONFIGA(a0) sync - sw zero, 0x007c(k1) /* Put processor to sleep */ +#endif + + li t0, SYS_SLEEP + sw zero, 0(t0) /* Put processor to sleep */ sync + nop + nop + nop + nop + nop + nop + nop + nop + /* This is where we return upon wakeup. * Reload all of the registers and return. */ -1: nop - lw k0, 0x20(sp) +resume_from_sleep: + nop + .set nomacro + .set noat + + lw k0, PT_C0STATUS(sp) // 0x20 mtc0 k0, CP0_STATUS - lw k0, 0x1c(sp) + lw k0, PT_CONTEXT(sp) // 0x1c mtc0 k0, CP0_CONTEXT - lw k0, 0x18(sp) + lw k0, PT_PAGEMASK(sp) // 0x18 mtc0 k0, CP0_PAGEMASK - lw k0, 0x14(sp) + lw k0, PT_CONFIG(sp) // 0x14 mtc0 k0, CP0_CONFIG lw $1, PT_R1(sp) lw $2, PT_R2(sp) @@ -120,14 +193,6 @@ lw $5, PT_R5(sp) lw $6, PT_R6(sp) lw $7, PT_R7(sp) - lw $8, PT_R8(sp) - lw $9, PT_R9(sp) - lw $10, PT_R10(sp) - lw $11, PT_R11(sp) - lw $12, PT_R12(sp) - lw $13, PT_R13(sp) - lw $14, PT_R14(sp) - lw $15, PT_R15(sp) lw $16, PT_R16(sp) lw $17, PT_R17(sp) lw $18, PT_R18(sp) @@ -136,15 +201,36 @@ lw $21, PT_R21(sp) lw $22, PT_R22(sp) lw $23, PT_R23(sp) - lw $24, PT_R24(sp) - lw $25, PT_R25(sp) - lw $26, PT_R26(sp) - lw $27, PT_R27(sp) lw $28, PT_R28(sp) - lw $29, PT_R29(sp) lw $30, PT_R30(sp) lw $31, PT_R31(sp) + + .set macro + .set at + + /* clear the wake source, but save it as the return value of the function */ + li t0, SYS_WAKESRC + lw v0, 0(t0) + sw v0, PT_R2(sp) + sw zero, 0(t0) + addiu sp, PT_SIZE + lw gp, save_and_sleep_frmsz-44(sp) + lw s8, save_and_sleep_frmsz-40(sp) + lw s7, save_and_sleep_frmsz-36(sp) + lw s6, save_and_sleep_frmsz-32(sp) + lw s5, save_and_sleep_frmsz-28(sp) + lw s4, save_and_sleep_frmsz-24(sp) + lw s3, save_and_sleep_frmsz-20(sp) + lw s2, save_and_sleep_frmsz-16(sp) + lw s1, save_and_sleep_frmsz-12(sp) + lw s0, save_and_sleep_frmsz-8(sp) + lw ra, save_and_sleep_frmsz-4(sp) + + addu sp, save_and_sleep_frmsz jr ra + nop + .set reorder END(save_and_sleep) + diff -Nur linux-2.4.32-rc1/arch/mips/au1000/common/time.c linux-2.4.32-rc1.mips/arch/mips/au1000/common/time.c --- linux-2.4.32-rc1/arch/mips/au1000/common/time.c 2005-01-19 15:09:26.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/common/time.c 2005-04-08 10:33:17.000000000 +0200 @@ -50,7 +50,6 @@ #include #include -extern void startup_match20_interrupt(void); extern void do_softirq(void); extern volatile unsigned long wall_jiffies; unsigned long missed_heart_beats = 0; @@ -59,14 +58,14 @@ static unsigned long r4k_cur; /* What counter should be at next timer irq */ extern rwlock_t xtime_lock; int no_au1xxx_32khz; -void (*au1k_wait_ptr)(void); +extern int allow_au1k_wait; /* default off for CP0 Counter */ /* Cycle counter value at the previous timer interrupt.. */ static unsigned int timerhi = 0, timerlo = 0; #ifdef CONFIG_PM #define MATCH20_INC 328 -extern void startup_match20_interrupt(void); +extern void startup_match20_interrupt(void (*handler)(int, void *, struct pt_regs *)); static unsigned long last_pc0, last_match20; #endif @@ -385,7 +384,6 @@ { unsigned int est_freq; extern unsigned long (*do_gettimeoffset)(void); - extern void au1k_wait(void); printk("calculating r4koff... "); r4k_offset = cal_r4koff(); @@ -437,9 +435,6 @@ au_writel(0, SYS_TOYWRITE); while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S); - au_writel(au_readl(SYS_WAKEMSK) | (1<<8), SYS_WAKEMSK); - au_writel(~0, SYS_WAKESRC); - au_sync(); while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20); /* setup match20 to interrupt once every 10ms */ @@ -447,13 +442,13 @@ au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2); au_sync(); while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20); - startup_match20_interrupt(); + startup_match20_interrupt(counter0_irq); do_gettimeoffset = do_fast_pm_gettimeoffset; /* We can use the real 'wait' instruction. */ - au1k_wait_ptr = au1k_wait; + allow_au1k_wait = 1; } #else diff -Nur linux-2.4.32-rc1/arch/mips/au1000/db1x00/board_setup.c linux-2.4.32-rc1.mips/arch/mips/au1000/db1x00/board_setup.c --- linux-2.4.32-rc1/arch/mips/au1000/db1x00/board_setup.c 2005-01-19 15:09:26.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/db1x00/board_setup.c 2005-03-19 08:17:51.000000000 +0100 @@ -46,10 +46,22 @@ #include #include -extern struct rtc_ops no_rtc_ops; +#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) && defined(CONFIG_MIPS_DB1550) +#include +extern struct ide_ops *ide_ops; +extern struct ide_ops au1xxx_ide_ops; +extern u32 au1xxx_ide_virtbase; +extern u64 au1xxx_ide_physbase; +extern int au1xxx_ide_irq; + +/* Ddma */ +chan_tab_t *ide_read_ch, *ide_write_ch; +u32 au1xxx_ide_ddma_enable = 0, switch4ddma = 1; // PIO+ddma + +dbdev_tab_t new_dbdev_tab_element = { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }; +#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX */ -/* not correct for db1550 */ -static BCSR * const bcsr = (BCSR *)0xAE000000; +extern struct rtc_ops no_rtc_ops; void board_reset (void) { @@ -57,6 +69,13 @@ au_writel(0x00000000, 0xAE00001C); } +void board_power_off (void) +{ +#ifdef CONFIG_MIPS_MIRAGE + au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT); +#endif +} + void __init board_setup(void) { u32 pin_func; @@ -108,8 +127,42 @@ au_writel(0x02000200, GPIO2_OUTPUT); #endif +#if defined(CONFIG_AU1XXX_SMC91111) +#define CPLD_CONTROL (0xAF00000C) + { + extern uint32_t au1xxx_smc91111_base; + extern unsigned int au1xxx_smc91111_irq; + extern int au1xxx_smc91111_nowait; + + au1xxx_smc91111_base = 0xAC000300; + au1xxx_smc91111_irq = AU1000_GPIO_8; + au1xxx_smc91111_nowait = 1; + + /* set up the Static Bus timing - only 396Mhz */ + bcsr->resets |= 0x7; + au_writel(0x00010003, MEM_STCFG0); + au_writel(0x000c00c0, MEM_STCFG2); + au_writel(0x85E1900D, MEM_STTIME2); + } +#endif /* end CONFIG_SMC91111 */ au_sync(); +#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) && defined(CONFIG_MIPS_DB1550) + /* + * Iniz IDE parameters + */ + ide_ops = &au1xxx_ide_ops; + au1xxx_ide_irq = DAUGHTER_CARD_IRQ; + au1xxx_ide_physbase = AU1XXX_ATA_PHYS_ADDR; + au1xxx_ide_virtbase = KSEG1ADDR(AU1XXX_ATA_PHYS_ADDR); + + /* + * change PIO or PIO+Ddma + * check the GPIO-6 pin condition. db1550:s6_dot + */ + switch4ddma = (au_readl(SYS_PINSTATERD) & (1 << 6)) ? 1 : 0; +#endif + #ifdef CONFIG_MIPS_DB1000 printk("AMD Alchemy Au1000/Db1000 Board\n"); #endif diff -Nur linux-2.4.32-rc1/arch/mips/au1000/db1x00/irqmap.c linux-2.4.32-rc1.mips/arch/mips/au1000/db1x00/irqmap.c --- linux-2.4.32-rc1/arch/mips/au1000/db1x00/irqmap.c 2005-01-19 15:09:26.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/db1x00/irqmap.c 2005-01-30 09:06:19.000000000 +0100 @@ -53,6 +53,7 @@ #ifdef CONFIG_MIPS_DB1550 { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 IRQ# { AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 1 IRQ# + { AU1000_GPIO_8, INTC_INT_LOW_LEVEL, 0 }, // Daughtercard IRQ# #else { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 Fully_Interted# { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card 0 STSCHG# diff -Nur linux-2.4.32-rc1/arch/mips/au1000/db1x00/Makefile linux-2.4.32-rc1.mips/arch/mips/au1000/db1x00/Makefile --- linux-2.4.32-rc1/arch/mips/au1000/db1x00/Makefile 2005-01-19 15:09:26.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/db1x00/Makefile 2005-01-30 09:06:19.000000000 +0100 @@ -17,4 +17,11 @@ obj-y := init.o board_setup.o irqmap.o obj-$(CONFIG_WM97XX_COMODULE) += mirage_ts.o +ifdef CONFIG_MIPS_DB1100 +ifdef CONFIG_MMC +obj-y += mmc_support.o +export-objs += mmc_support.o +endif +endif + include $(TOPDIR)/Rules.make diff -Nur linux-2.4.32-rc1/arch/mips/au1000/db1x00/mmc_support.c linux-2.4.32-rc1.mips/arch/mips/au1000/db1x00/mmc_support.c --- linux-2.4.32-rc1/arch/mips/au1000/db1x00/mmc_support.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/db1x00/mmc_support.c 2005-01-30 09:07:01.000000000 +0100 @@ -0,0 +1,126 @@ +/* + * BRIEF MODULE DESCRIPTION + * + * MMC support routines for DB1100. + * + * + * Copyright (c) 2003-2004 Embedded Edge, LLC. + * Author: Embedded Edge, LLC. + * Contact: dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + + +#include +#include +#include +#include + +#include +#include +#include +#include + + +/* SD/MMC controller support functions */ + +/* + * Detect card. + */ +void mmc_card_inserted(int _n_, int *_res_) +{ + u32 gpios = au_readl(SYS_PINSTATERD); + u32 emptybit = (_n_) ? (1<<20) : (1<<19); + *_res_ = ((gpios & emptybit) == 0); +} + +/* + * Check card write protection. + */ +void mmc_card_writable(int _n_, int *_res_) +{ + BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; + unsigned long mmc_wp, board_specific; + + if (_n_) { + mmc_wp = BCSR_BOARD_SD1_WP; + } else { + mmc_wp = BCSR_BOARD_SD0_WP; + } + + board_specific = au_readl((unsigned long)(&bcsr->specific)); + + if (!(board_specific & mmc_wp)) {/* low means card writable */ + *_res_ = 1; + } else { + *_res_ = 0; + } +} + +/* + * Apply power to card slot. + */ +void mmc_power_on(int _n_) +{ + BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; + unsigned long mmc_pwr, board_specific; + + if (_n_) { + mmc_pwr = BCSR_BOARD_SD1_PWR; + } else { + mmc_pwr = BCSR_BOARD_SD0_PWR; + } + + board_specific = au_readl((unsigned long)(&bcsr->specific)); + board_specific |= mmc_pwr; + + au_writel(board_specific, (int)(&bcsr->specific)); + au_sync_delay(1); +} + +/* + * Remove power from card slot. + */ +void mmc_power_off(int _n_) +{ + BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; + unsigned long mmc_pwr, board_specific; + + if (_n_) { + mmc_pwr = BCSR_BOARD_SD1_PWR; + } else { + mmc_pwr = BCSR_BOARD_SD0_PWR; + } + + board_specific = au_readl((unsigned long)(&bcsr->specific)); + board_specific &= ~mmc_pwr; + + au_writel(board_specific, (int)(&bcsr->specific)); + au_sync_delay(1); +} + +EXPORT_SYMBOL(mmc_card_inserted); +EXPORT_SYMBOL(mmc_card_writable); +EXPORT_SYMBOL(mmc_power_on); +EXPORT_SYMBOL(mmc_power_off); + diff -Nur linux-2.4.32-rc1/arch/mips/au1000/ficmmp/au1200_ibutton.c linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/au1200_ibutton.c --- linux-2.4.32-rc1/arch/mips/au1000/ficmmp/au1200_ibutton.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/au1200_ibutton.c 2005-02-03 07:35:29.000000000 +0100 @@ -0,0 +1,270 @@ +/* ---------------------------------------------------------------------- + * mtwilson_keys.c + * + * Copyright (C) 2003 Intrinsyc Software Inc. + * + * Intel Personal Media Player buttons + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * May 02, 2003 : Initial version [FB] + * + ------------------------------------------------------------------------*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#define DRIVER_VERSION "V1.0" +#define DRIVER_AUTHOR "FIC" +#define DRIVER_DESC "FIC Travis Media Player Button Driver" +#define DRIVER_NAME "Au1200Button" + +#define BUTTON_MAIN (1<<1) +#define BUTTON_SELECT (1<<6) +#define BUTTON_GUIDE (1<<12) +#define BUTTON_DOWN (1<<17) +#define BUTTON_LEFT (1<<19) +#define BUTTON_RIGHT (1<<26) +#define BUTTON_UP (1<<28) + +#define BUTTON_MASK (\ + BUTTON_MAIN \ + | BUTTON_SELECT \ + | BUTTON_GUIDE \ + | BUTTON_DOWN \ + | BUTTON_LEFT \ + | BUTTON_RIGHT \ + | BUTTON_UP \ + ) + +#define BUTTON_INVERT (\ + BUTTON_MAIN \ + | 0 \ + | BUTTON_GUIDE \ + | 0 \ + | 0 \ + | 0 \ + | 0 \ + ) + +char button_map[32]={0,KEY_S,0,0,0,0,KEY_ENTER,0,0,0,0,0,KEY_G,0,0,0,0,KEY_DOWN,0,KEY_LEFT,0,0,0,0,0,0,KEY_RIGHT,0,KEY_UP,0,0,0}; +//char button_map[32]={0,0,0,0,0,0,KEY_ENTER,0,0,0,0,0,KEY_G,0,0,0,0,KEY_DOWN,0,KEY_LEFT,0,0,0,0,0,0,KEY_RIGHT,0,KEY_UP,0,0,0}; + +//char button_map[32]={0,KEY_TAB,0,0,0,0,KEY_M,0,0,0,0,0,KEY_S,0,0,0,0,KEY_DOWN,0,KEY_LEFT,0,0,0,0,0,0,KEY_RIGHT,0,KEY_UP,0,0,0}; +//char button_map[32]={0,0,0,0,0,0,KEY_M,0,0,0,0,0,KEY_S,0,0,0,0,KEY_DOWN,0,KEY_LEFT,0,0,0,0,0,0,KEY_RIGHT,0,KEY_UP,0,0,0}; + +#define BUTTON_COUNT (sizeof (button_map) / sizeof (button_map[0])) + +struct input_dev dev; +struct timeval cur_tv; + +static unsigned int old_tv_usec = 0; + +static unsigned int read_button_state(void) +{ + unsigned int state; + + state = au_readl(SYS_PINSTATERD) & BUTTON_MASK; /* get gpio status */ + + state ^= BUTTON_INVERT; /* invert main & guide button */ + + /* printk("au1200_ibutton.c: button state [0x%X]\r\n",state); */ + return state; +} + +//This function returns 0 if the allowed microseconds have elapsed since the last call to ths function, otherwise it returns 1 to indicate a bounce condition +static unsigned int bounce() +{ + + unsigned int elapsed_time; + + do_gettimeofday (&cur_tv); + + if (!old_tv_usec) { + old_tv_usec = cur_tv.tv_usec; + return 0; + } + + if(cur_tv.tv_usec > old_tv_usec) { + /* If there hasn't been rollover */ + elapsed_time = ((cur_tv.tv_usec - old_tv_usec)); + } + else { + /* Accounting for rollover */ + elapsed_time = ((1000000 - old_tv_usec + cur_tv.tv_usec)); + } + + if (elapsed_time > 250000) { + old_tv_usec = 0; /* reset the bounce time */ + return 0; + } + + return 1; +} + +/* button interrupt handler */ +static void button_interrupt(int irq, void *dev, struct pt_regs *regs) +{ + + unsigned int i,bit_mask, key_choice; + u32 button_state; + + /* Report state to upper level */ + + button_state = read_button_state() & BUTTON_MASK; /* get new gpio status */ + + /* Return if this is a repeated (bouncing) event */ + if(bounce()) + return; + + /* we want to make keystrokes */ + for( i=0; i< BUTTON_COUNT; i++) { + bit_mask = 1< +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#if defined(CONFIG_MIPS_FICMMP) + #define DOCK_GPIO 215 +#else + #error Unsupported Au1xxx Platform +#endif + +#define MAKE_FLAG 0x20 + +#undef DEBUG + +#define DEBUG 0 +//#define DEBUG 1 + +#if DEBUG +#define DPRINTK(format, args...) printk(__FUNCTION__ ": " format, ## args) +#else +#define DPRINTK(format, args...) do { } while (0) +#endif + +/* Please note that this driver is based on a timer and is not interrupt + * driven. If you are going to make use of this driver, you will need to have + * your application open the dock listing from the /dev directory first. + */ + +struct au1xxx_dock { + struct fasync_struct *fasync; + wait_queue_head_t read_wait; + int open_count; + unsigned int debounce; + unsigned int current; + unsigned int last; +}; + +static struct au1xxx_dock dock_info; + + +static void dock_timer_periodic(void *data); + +static struct tq_struct dock_task = { + routine: dock_timer_periodic, + data: NULL +}; + +static int cleanup_flag = 0; +static DECLARE_WAIT_QUEUE_HEAD(cleanup_wait_queue); + + +static unsigned int read_dock_state(void) +{ + u32 state; + + state = au1xxx_gpio_read(DOCK_GPIO); + + /* printk( "Current Dock State: %d\n", state ); */ + + return state; +} + + +static void dock_timer_periodic(void *data) +{ + struct au1xxx_dock *dock = (struct au1xxx_dock *)data; + unsigned long dock_state; + + /* If cleanup wants us to die */ + if (cleanup_flag) { + /* now cleanup_module can return */ + wake_up(&cleanup_wait_queue); + } else { + /* put ourselves back in the task queue */ + queue_task(&dock_task, &tq_timer); + } + + /* read current dock */ + dock_state = read_dock_state(); + + /* if dock states hasn't changed */ + /* save time and be done. */ + if (dock_state == dock->current) { + return; + } + + if (dock_state == dock->debounce) { + dock->current = dock_state; + } else { + dock->debounce = dock_state; + } + if (dock->current != dock->last) { + if (waitqueue_active(&dock->read_wait)) { + wake_up_interruptible(&dock->read_wait); + } + } +} + + +static ssize_t au1xxx_dock_read(struct file *filp, char *buffer, size_t count, loff_t *ppos) +{ + struct au1xxx_dock *dock = filp->private_data; + char event[3]; + int last; + int cur; + int err; + +try_again: + + while (dock->current == dock->last) { + if (filp->f_flags & O_NONBLOCK) { + return -EAGAIN; + } + interruptible_sleep_on(&dock->read_wait); + if (signal_pending(current)) { + return -ERESTARTSYS; + } + } + + cur = dock->current; + last = dock->last; + + if(cur != last) + { + event[0] = cur ? 'D' : 'U'; + event[1] = '\r'; + event[2] = '\n'; + } + else + goto try_again; + + dock->last = cur; + err = copy_to_user(buffer, &event, 3); + if (err) { + return err; + } + + return 3; +} + + +static int au1xxx_dock_open(struct inode *inode, struct file *filp) +{ + struct au1xxx_dock *dock = &dock_info; + + MOD_INC_USE_COUNT; + + filp->private_data = dock; + + if (dock->open_count++ == 0) { + dock_task.data = dock; + cleanup_flag = 0; + queue_task(&dock_task, &tq_timer); + } + + return 0; +} + + +static unsigned int au1xxx_dock_poll(struct file *filp, poll_table *wait) +{ + struct au1xxx_dock *dock = filp->private_data; + int ret = 0; + + DPRINTK("start\n"); + poll_wait(filp, &dock->read_wait, wait); + if (dock->current != dock->last) { + ret = POLLIN | POLLRDNORM; + } + return ret; +} + + +static int au1xxx_dock_release(struct inode *inode, struct file *filp) +{ + struct au1xxx_dock *dock = filp->private_data; + + DPRINTK("start\n"); + + if (--dock->open_count == 0) { + cleanup_flag = 1; + sleep_on(&cleanup_wait_queue); + } + MOD_DEC_USE_COUNT; + + return 0; +} + + + +static struct file_operations au1xxx_dock_fops = { + owner: THIS_MODULE, + read: au1xxx_dock_read, + poll: au1xxx_dock_poll, + open: au1xxx_dock_open, + release: au1xxx_dock_release, +}; + +/* + * The au1xxx dock is a misc device: + * Major 10 char + * Minor 22 /dev/dock + * + * This is /dev/misc/dock if devfs is used. + */ + +static struct miscdevice au1xxx_dock_dev = { + minor: 23, + name: "dock", + fops: &au1xxx_dock_fops, +}; + +static int __init au1xxx_dock_init(void) +{ + struct au1xxx_dock *dock = &dock_info; + int ret; + + DPRINTK("Initializing dock driver\n"); + dock->open_count = 0; + cleanup_flag = 0; + init_waitqueue_head(&dock->read_wait); + + + /* yamon configures GPIO pins for the dock + * no initialization needed + */ + + ret = misc_register(&au1xxx_dock_dev); + + DPRINTK("dock driver fully initialized.\n"); + + return ret; +} + + +static void __exit au1xxx_dock_exit(void) +{ + DPRINTK("unloading dock driver\n"); + misc_deregister(&au1xxx_dock_dev); +} + + +module_init(au1xxx_dock_init); +module_exit(au1xxx_dock_exit); diff -Nur linux-2.4.32-rc1/arch/mips/au1000/ficmmp/board_setup.c linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/board_setup.c --- linux-2.4.32-rc1/arch/mips/au1000/ficmmp/board_setup.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/board_setup.c 2005-03-19 08:17:51.000000000 +0100 @@ -0,0 +1,226 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Alchemy Pb1200 board setup. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) +#include +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern struct rtc_ops no_rtc_ops; + +/* value currently in the board configuration register */ +u16 ficmmp_config = 0; + +#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) +extern struct ide_ops *ide_ops; +extern struct ide_ops au1xxx_ide_ops; +extern u32 au1xxx_ide_virtbase; +extern u64 au1xxx_ide_physbase; +extern int au1xxx_ide_irq; + +u32 led_base_addr; +/* Ddma */ +chan_tab_t *ide_read_ch, *ide_write_ch; +u32 au1xxx_ide_ddma_enable = 0, switch4ddma = 1; // PIO+ddma + +dbdev_tab_t new_dbdev_tab_element = { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }; +#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX */ + +void board_reset (void) +{ + au_writel(0, 0xAD80001C); +} + +void board_power_off (void) +{ +} + +void __init board_setup(void) +{ + char *argptr = NULL; + u32 pin_func; + rtc_ops = &no_rtc_ops; + + ficmmp_config_init(); //Initialize FIC control register + +#if 0 + /* Enable PSC1 SYNC for AC97. Normaly done in audio driver, + * but it is board specific code, so put it here. + */ + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; + au_writel(pin_func, SYS_PINFUNC); + + au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */ + au_sync(); +#endif + +#if defined( CONFIG_I2C_ALGO_AU1550 ) + { + u32 freq0, clksrc; + + /* Select SMBUS in CPLD */ + /* bcsr->resets &= ~(BCSR_RESETS_PCS0MUX); */ + + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func &= ~(3<<17 | 1<<4); + /* Set GPIOs correctly */ + pin_func |= 2<<17; + au_writel(pin_func, SYS_PINFUNC); + au_sync(); + + /* The i2c driver depends on 50Mhz clock */ + freq0 = au_readl(SYS_FREQCTRL0); + au_sync(); + freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); + freq0 |= (3<resets bit 12: 0=SMB 1=SPI + */ +#if defined(CONFIG_AU1550_PSC_SPI) && defined(CONFIG_I2C_ALGO_AU1550) + #error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\ + Refer to Pb1200 documentation. +#elif defined( CONFIG_AU1550_PSC_SPI ) + //bcsr->resets |= BCSR_RESETS_PCS0MUX; +#elif defined( CONFIG_I2C_ALGO_AU1550 ) + //bcsr->resets &= (~BCSR_RESETS_PCS0MUX); +#endif + au_sync(); + + printk("FIC Multimedia Player Board\n"); + au1xxx_gpio_tristate(5); + printk("B1900100: %X\n", *((volatile u32*)0xB1900100)); + printk("B190002C: %X\n", *((volatile u32*)0xB190002C)); +} + +int +board_au1200fb_panel (void) +{ + au1xxx_gpio_tristate(6); + + if (au1xxx_gpio_read(12) == 0) + return 9; /* FS453_640x480 (Composite/S-Video) */ + else + return 7; /* Sharp 320x240 TFT */ +} + +int +board_au1200fb_panel_init (void) +{ + /*Enable data buffers*/ + ficmmp_config_clear(FICMMP_CONFIG_LCMDATAOUT); + /*Take LCD out of reset*/ + ficmmp_config_set(FICMMP_CONFIG_LCMPWREN | FICMMP_CONFIG_LCMEN); + return 0; +} + +int +board_au1200fb_panel_shutdown (void) +{ + /*Disable data buffers*/ + ficmmp_config_set(FICMMP_CONFIG_LCMDATAOUT); + /*Put LCD in reset, remove power*/ + ficmmp_config_clear(FICMMP_CONFIG_LCMEN | FICMMP_CONFIG_LCMPWREN); + return 0; +} + diff -Nur linux-2.4.32-rc1/arch/mips/au1000/ficmmp/init.c linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/init.c --- linux-2.4.32-rc1/arch/mips/au1000/ficmmp/init.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/init.c 2005-01-30 09:01:27.000000000 +0100 @@ -0,0 +1,76 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * PB1200 board setup + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +int prom_argc; +char **prom_argv, **prom_envp; +extern void __init prom_init_cmdline(void); +extern char *prom_getenv(char *envname); + +const char *get_system_type(void) +{ + return "FIC Multimedia Player (Au1200)"; +} + +u32 mae_memsize = 0; + +int __init prom_init(int argc, char **argv, char **envp, int *prom_vec) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = argc; + prom_argv = argv; + prom_envp = envp; + + mips_machgroup = MACH_GROUP_ALCHEMY; + mips_machtype = MACH_PB1000; /* set the platform # */ + prom_init_cmdline(); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str) { + memsize = 0x08000000; + } else { + memsize = simple_strtol(memsize_str, NULL, 0); + } + + /* reserved 32MB for MAE driver */ + memsize -= (32 * 1024 * 1024); + add_memory_region(0, memsize, BOOT_MEM_RAM); + mae_memsize = memsize; /* for drivers/char/au1xxx_mae.c */ + return 0; +} + diff -Nur linux-2.4.32-rc1/arch/mips/au1000/ficmmp/irqmap.c linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/irqmap.c --- linux-2.4.32-rc1/arch/mips/au1000/ficmmp/irqmap.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/irqmap.c 2005-01-30 09:01:27.000000000 +0100 @@ -0,0 +1,61 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx irq map table + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +au1xxx_irq_map_t au1xxx_irq_map[] = { + { FICMMP_IDE_INT, INTC_INT_HIGH_LEVEL, 0 }, + { AU1XXX_SMC91111_IRQ, INTC_INT_HIGH_LEVEL, 0 }, + { AU1000_GPIO_1 , INTC_INT_FALL_EDGE, 0 }, // main button + { AU1000_GPIO_6 , INTC_INT_RISE_EDGE, 0 }, // select button + { AU1000_GPIO_12, INTC_INT_FALL_EDGE, 0 }, // guide button + { AU1000_GPIO_17, INTC_INT_RISE_EDGE, 0 }, // down button + { AU1000_GPIO_19, INTC_INT_RISE_EDGE, 0 }, // left button + { AU1000_GPIO_26, INTC_INT_RISE_EDGE, 0 }, // right button + { AU1000_GPIO_28, INTC_INT_RISE_EDGE, 0 }, // up button +}; + +int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t); + diff -Nur linux-2.4.32-rc1/arch/mips/au1000/ficmmp/Makefile linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/Makefile --- linux-2.4.32-rc1/arch/mips/au1000/ficmmp/Makefile 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/ficmmp/Makefile 2005-01-30 09:01:27.000000000 +0100 @@ -0,0 +1,25 @@ +# +# Copyright 2000 MontaVista Software Inc. +# Author: MontaVista Software, Inc. +# ppopov@mvista.com or source@mvista.com +# +# Makefile for the Alchemy Semiconductor FIC board. +# +# Note! Dependencies are done automagically by 'make dep', which also +# removes any old dependencies. DON'T put your own dependencies here +# unless it's something special (ie not a .c file). +# + +USE_STANDARD_AS_RULE := true + +O_TARGET := ficmmp.o + +obj-y := init.o board_setup.o irqmap.o au1200_ibutton.o au1xxx_dock.o + +ifdef CONFIG_MMC +obj-y += mmc_support.o +export-objs +=mmc_support.o +endif + + +include $(TOPDIR)/Rules.make diff -Nur linux-2.4.32-rc1/arch/mips/au1000/hydrogen3/board_setup.c linux-2.4.32-rc1.mips/arch/mips/au1000/hydrogen3/board_setup.c --- linux-2.4.32-rc1/arch/mips/au1000/hydrogen3/board_setup.c 2005-01-19 15:09:26.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/hydrogen3/board_setup.c 2005-03-19 08:17:51.000000000 +0100 @@ -51,12 +51,19 @@ { } +void board_power_off (void) +{ +} + void __init board_setup(void) { u32 pin_func; rtc_ops = &no_rtc_ops; + /* Set GPIO14 high to make CD/DAT1 high for MMC to work */ + au_writel(1<<14, SYS_OUTPUTSET); + #ifdef CONFIG_AU1X00_USB_DEVICE // 2nd USB port is USB device pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000); diff -Nur linux-2.4.32-rc1/arch/mips/au1000/hydrogen3/buttons.c linux-2.4.32-rc1.mips/arch/mips/au1000/hydrogen3/buttons.c --- linux-2.4.32-rc1/arch/mips/au1000/hydrogen3/buttons.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/hydrogen3/buttons.c 2005-02-11 22:09:55.000000000 +0100 @@ -0,0 +1,308 @@ +/* + * Copyright (C) 2003 Metrowerks, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define BUTTON_SELECT (1<<1) +#define BUTTON_1 (1<<2) +#define BUTTON_2 (1<<3) +#define BUTTON_ONOFF (1<<6) +#define BUTTON_3 (1<<7) +#define BUTTON_4 (1<<8) +#define BUTTON_LEFT (1<<9) +#define BUTTON_DOWN (1<<10) +#define BUTTON_RIGHT (1<<11) +#define BUTTON_UP (1<<12) + +#define BUTTON_MASK (\ + BUTTON_SELECT \ + | BUTTON_1 \ + | BUTTON_2 \ + | BUTTON_ONOFF \ + | BUTTON_3 \ + | BUTTON_4 \ + | BUTTON_LEFT \ + | BUTTON_DOWN \ + | BUTTON_RIGHT \ + | BUTTON_UP \ + ) + +#define BUTTON_INVERT (\ + BUTTON_SELECT \ + | BUTTON_1 \ + | BUTTON_2 \ + | BUTTON_3 \ + | BUTTON_4 \ + | BUTTON_LEFT \ + | BUTTON_DOWN \ + | BUTTON_RIGHT \ + | BUTTON_UP \ + ) + + + +#define MAKE_FLAG 0x20 + +#undef DEBUG + +#define DEBUG 0 +//#define DEBUG 1 + +#if DEBUG +#define DPRINTK(format, args...) printk(__FUNCTION__ ": " format, ## args) +#else +#define DPRINTK(format, args...) do { } while (0) +#endif + +/* Please note that this driver is based on a timer and is not interrupt + * driven. If you are going to make use of this driver, you will need to have + * your application open the buttons listing from the /dev directory first. + */ + +struct hydrogen3_buttons { + struct fasync_struct *fasync; + wait_queue_head_t read_wait; + int open_count; + unsigned int debounce; + unsigned int current; + unsigned int last; +}; + +static struct hydrogen3_buttons buttons_info; + + +static void button_timer_periodic(void *data); + +static struct tq_struct button_task = { + routine: button_timer_periodic, + data: NULL +}; + +static int cleanup_flag = 0; +static DECLARE_WAIT_QUEUE_HEAD(cleanup_wait_queue); + + +static unsigned int read_button_state(void) +{ + unsigned long state; + + state = inl(SYS_PINSTATERD) & BUTTON_MASK; + state ^= BUTTON_INVERT; + + DPRINTK( "Current Button State: %d\n", state ); + + return state; +} + + +static void button_timer_periodic(void *data) +{ + struct hydrogen3_buttons *buttons = (struct hydrogen3_buttons *)data; + unsigned long button_state; + + // If cleanup wants us to die + if (cleanup_flag) { + wake_up(&cleanup_wait_queue); // now cleanup_module can return + } else { + queue_task(&button_task, &tq_timer); // put ourselves back in the task queue + } + + // read current buttons + button_state = read_button_state(); + + // if no buttons are down and nothing to do then + // save time and be done. + if ((button_state == 0) && (buttons->current == 0)) { + return; + } + + if (button_state == buttons->debounce) { + buttons->current = button_state; + } else { + buttons->debounce = button_state; + } +// printk("0x%04x\n", button_state); + if (buttons->current != buttons->last) { + if (waitqueue_active(&buttons->read_wait)) { + wake_up_interruptible(&buttons->read_wait); + } + } +} + + +static ssize_t hydrogen3_buttons_read(struct file *filp, char *buffer, size_t count, loff_t *ppos) +{ + struct hydrogen3_buttons *buttons = filp->private_data; + char events[16]; + int index; + int last; + int cur; + int bit; + int bit_mask; + int err; + + DPRINTK("start\n"); + +try_again: + + while (buttons->current == buttons->last) { + if (filp->f_flags & O_NONBLOCK) { + return -EAGAIN; + } + interruptible_sleep_on(&buttons->read_wait); + if (signal_pending(current)) { + return -ERESTARTSYS; + } + } + + cur = buttons->current; + last = buttons->last; + + index = 0; + bit_mask = 1; + for (bit = 0; (bit < 16) && count; bit++) { + if ((cur ^ last) & bit_mask) { + if (cur & bit_mask) { + events[index] = (bit | MAKE_FLAG) + 'A'; + last |= bit_mask; + } else { + events[index] = bit + 'A'; + last &= ~bit_mask; + } + index++; + count--; + } + bit_mask <<= 1; + } + buttons->last = last; + + if (index == 0) { + goto try_again; + } + + err = copy_to_user(buffer, events, index); + if (err) { + return err; + } + + return index; +} + + +static int hydrogen3_buttons_open(struct inode *inode, struct file *filp) +{ + struct hydrogen3_buttons *buttons = &buttons_info; + + DPRINTK("start\n"); + MOD_INC_USE_COUNT; + + filp->private_data = buttons; + + if (buttons->open_count++ == 0) { + button_task.data = buttons; + cleanup_flag = 0; + queue_task(&button_task, &tq_timer); + } + + return 0; +} + + +static unsigned int hydrogen3_buttons_poll(struct file *filp, poll_table *wait) +{ + struct hydrogen3_buttons *buttons = filp->private_data; + int ret = 0; + + DPRINTK("start\n"); + poll_wait(filp, &buttons->read_wait, wait); + if (buttons->current != buttons->last) { + ret = POLLIN | POLLRDNORM; + } + return ret; +} + + +static int hydrogen3_buttons_release(struct inode *inode, struct file *filp) +{ + struct hydrogen3_buttons *buttons = filp->private_data; + + DPRINTK("start\n"); + + if (--buttons->open_count == 0) { + cleanup_flag = 1; + sleep_on(&cleanup_wait_queue); + } + MOD_DEC_USE_COUNT; + + return 0; +} + + + +static struct file_operations hydrogen3_buttons_fops = { + owner: THIS_MODULE, + read: hydrogen3_buttons_read, + poll: hydrogen3_buttons_poll, + open: hydrogen3_buttons_open, + release: hydrogen3_buttons_release, +}; + +/* + * The hydrogen3 buttons is a misc device: + * Major 10 char + * Minor 22 /dev/buttons + * + * This is /dev/misc/buttons if devfs is used. + */ + +static struct miscdevice hydrogen3_buttons_dev = { + minor: 22, + name: "buttons", + fops: &hydrogen3_buttons_fops, +}; + +static int __init hydrogen3_buttons_init(void) +{ + struct hydrogen3_buttons *buttons = &buttons_info; + int ret; + + DPRINTK("Initializing buttons driver\n"); + buttons->open_count = 0; + cleanup_flag = 0; + init_waitqueue_head(&buttons->read_wait); + + + // yamon configures GPIO pins for the buttons + // no initialization needed + + ret = misc_register(&hydrogen3_buttons_dev); + + DPRINTK("Buttons driver fully initialized.\n"); + + return ret; +} + + +static void __exit hydrogen3_buttons_exit(void) +{ + DPRINTK("unloading buttons driver\n"); + misc_deregister(&hydrogen3_buttons_dev); +} + + +module_init(hydrogen3_buttons_init); +module_exit(hydrogen3_buttons_exit); diff -Nur linux-2.4.32-rc1/arch/mips/au1000/hydrogen3/Makefile linux-2.4.32-rc1.mips/arch/mips/au1000/hydrogen3/Makefile --- linux-2.4.32-rc1/arch/mips/au1000/hydrogen3/Makefile 2005-01-19 15:09:26.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/hydrogen3/Makefile 2005-02-11 22:09:55.000000000 +0100 @@ -14,6 +14,11 @@ O_TARGET := hydrogen3.o -obj-y := init.o board_setup.o irqmap.o +obj-y := init.o board_setup.o irqmap.o buttons.o + +ifdef CONFIG_MMC +obj-y += mmc_support.o +export-objs +=mmc_support.o +endif include $(TOPDIR)/Rules.make diff -Nur linux-2.4.32-rc1/arch/mips/au1000/hydrogen3/mmc_support.c linux-2.4.32-rc1.mips/arch/mips/au1000/hydrogen3/mmc_support.c --- linux-2.4.32-rc1/arch/mips/au1000/hydrogen3/mmc_support.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/hydrogen3/mmc_support.c 2005-02-02 05:27:06.000000000 +0100 @@ -0,0 +1,89 @@ +/* + * BRIEF MODULE DESCRIPTION + * + * MMC support routines for Hydrogen3. + * + * + * Copyright (c) 2003-2004 Embedded Edge, LLC. + * Author: Embedded Edge, LLC. + * Contact: dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + + +#include +#include +#include +#include + +#include +#include +#include + +#define GPIO_17_WP 0x20000 + +/* SD/MMC controller support functions */ + +/* + * Detect card. + */ +void mmc_card_inserted(int _n_, int *_res_) +{ + u32 gpios = au_readl(SYS_PINSTATERD); + u32 emptybit = (1<<16); + *_res_ = ((gpios & emptybit) == 0); +} + +/* + * Check card write protection. + */ +void mmc_card_writable(int _n_, int *_res_) +{ + unsigned long mmc_wp, board_specific; + board_specific = au_readl(SYS_OUTPUTSET); + mmc_wp=GPIO_17_WP; + if (!(board_specific & mmc_wp)) {/* low means card writable */ + *_res_ = 1; + } else { + *_res_ = 0; + } +} +/* + * Apply power to card slot. + */ +void mmc_power_on(int _n_) +{ +} + +/* + * Remove power from card slot. + */ +void mmc_power_off(int _n_) +{ +} + +EXPORT_SYMBOL(mmc_card_inserted); +EXPORT_SYMBOL(mmc_card_writable); +EXPORT_SYMBOL(mmc_power_on); +EXPORT_SYMBOL(mmc_power_off); + diff -Nur linux-2.4.32-rc1/arch/mips/au1000/mtx-1/board_setup.c linux-2.4.32-rc1.mips/arch/mips/au1000/mtx-1/board_setup.c --- linux-2.4.32-rc1/arch/mips/au1000/mtx-1/board_setup.c 2004-02-18 14:36:30.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/mtx-1/board_setup.c 2004-11-26 09:37:16.000000000 +0100 @@ -48,6 +48,12 @@ extern struct rtc_ops no_rtc_ops; +void board_reset (void) +{ + /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ + au_writel(0x00000000, 0xAE00001C); +} + void __init board_setup(void) { rtc_ops = &no_rtc_ops; diff -Nur linux-2.4.32-rc1/arch/mips/au1000/mtx-1/irqmap.c linux-2.4.32-rc1.mips/arch/mips/au1000/mtx-1/irqmap.c --- linux-2.4.32-rc1/arch/mips/au1000/mtx-1/irqmap.c 2005-01-19 15:09:26.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/mtx-1/irqmap.c 2004-11-26 09:37:16.000000000 +0100 @@ -72,10 +72,10 @@ * A B C D */ { - {INTA, INTB, INTC, INTD}, /* IDSEL 0 */ - {INTA, INTB, INTC, INTD}, /* IDSEL 1 */ - {INTA, INTB, INTC, INTD}, /* IDSEL 2 */ - {INTA, INTB, INTC, INTD}, /* IDSEL 3 */ + {INTA, INTB, INTX, INTX}, /* IDSEL 0 */ + {INTB, INTA, INTX, INTX}, /* IDSEL 1 */ + {INTC, INTD, INTX, INTX}, /* IDSEL 2 */ + {INTD, INTC, INTX, INTX}, /* IDSEL 3 */ }; const long min_idsel = 0, max_idsel = 3, irqs_per_slot = 4; return PCI_IRQ_TABLE_LOOKUP; diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1000/board_setup.c linux-2.4.32-rc1.mips/arch/mips/au1000/pb1000/board_setup.c --- linux-2.4.32-rc1/arch/mips/au1000/pb1000/board_setup.c 2005-01-19 15:09:26.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1000/board_setup.c 2005-03-19 08:17:51.000000000 +0100 @@ -58,6 +58,10 @@ { } +void board_power_off (void) +{ +} + void __init board_setup(void) { u32 pin_func, static_cfg0; diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1100/board_setup.c linux-2.4.32-rc1.mips/arch/mips/au1000/pb1100/board_setup.c --- linux-2.4.32-rc1/arch/mips/au1000/pb1100/board_setup.c 2005-01-19 15:09:26.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1100/board_setup.c 2005-03-19 08:17:51.000000000 +0100 @@ -62,6 +62,10 @@ au_writel(0x00000000, 0xAE00001C); } +void board_power_off (void) +{ +} + void __init board_setup(void) { u32 pin_func; diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1100/Makefile linux-2.4.32-rc1.mips/arch/mips/au1000/pb1100/Makefile --- linux-2.4.32-rc1/arch/mips/au1000/pb1100/Makefile 2003-08-25 13:44:39.000000000 +0200 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1100/Makefile 2005-01-30 09:10:29.000000000 +0100 @@ -16,4 +16,10 @@ obj-y := init.o board_setup.o irqmap.o + +ifdef CONFIG_MMC +obj-y += mmc_support.o +export-objs += mmc_support.o +endif + include $(TOPDIR)/Rules.make diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1100/mmc_support.c linux-2.4.32-rc1.mips/arch/mips/au1000/pb1100/mmc_support.c --- linux-2.4.32-rc1/arch/mips/au1000/pb1100/mmc_support.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1100/mmc_support.c 2005-01-30 09:10:29.000000000 +0100 @@ -0,0 +1,126 @@ +/* + * BRIEF MODULE DESCRIPTION + * + * MMC support routines for PB1100. + * + * + * Copyright (c) 2003-2004 Embedded Edge, LLC. + * Author: Embedded Edge, LLC. + * Contact: dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + + +#include +#include +#include +#include + +#include +#include +#include +#include + + +/* SD/MMC controller support functions */ + +/* + * Detect card. + */ +void mmc_card_inserted(int _n_, int *_res_) +{ + u32 gpios = au_readl(SYS_PINSTATERD); + u32 emptybit = (_n_) ? (1<<15) : (1<<14); + *_res_ = ((gpios & emptybit) == 0); +} + +/* + * Check card write protection. + */ +void mmc_card_writable(int _n_, int *_res_) +{ + BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; + unsigned long mmc_wp, board_specific; + + if (_n_) { + mmc_wp = BCSR_PCMCIA_SD1_WP; + } else { + mmc_wp = BCSR_PCMCIA_SD0_WP; + } + + board_specific = au_readl((unsigned long)(&bcsr->pcmcia)); + + if (!(board_specific & mmc_wp)) {/* low means card writable */ + *_res_ = 1; + } else { + *_res_ = 0; + } +} + +/* + * Apply power to card slot. + */ +void mmc_power_on(int _n_) +{ + BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; + unsigned long mmc_pwr, board_specific; + + if (_n_) { + mmc_pwr = BCSR_PCMCIA_SD1_PWR; + } else { + mmc_pwr = BCSR_PCMCIA_SD0_PWR; + } + + board_specific = au_readl((unsigned long)(&bcsr->pcmcia)); + board_specific |= mmc_pwr; + + au_writel(board_specific, (int)(&bcsr->pcmcia)); + au_sync_delay(1); +} + +/* + * Remove power from card slot. + */ +void mmc_power_off(int _n_) +{ + BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; + unsigned long mmc_pwr, board_specific; + + if (_n_) { + mmc_pwr = BCSR_PCMCIA_SD1_PWR; + } else { + mmc_pwr = BCSR_PCMCIA_SD0_PWR; + } + + board_specific = au_readl((unsigned long)(&bcsr->pcmcia)); + board_specific &= ~mmc_pwr; + + au_writel(board_specific, (int)(&bcsr->pcmcia)); + au_sync_delay(1); +} + +EXPORT_SYMBOL(mmc_card_inserted); +EXPORT_SYMBOL(mmc_card_writable); +EXPORT_SYMBOL(mmc_power_on); +EXPORT_SYMBOL(mmc_power_off); + diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1200/board_setup.c linux-2.4.32-rc1.mips/arch/mips/au1000/pb1200/board_setup.c --- linux-2.4.32-rc1/arch/mips/au1000/pb1200/board_setup.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1200/board_setup.c 2005-03-19 08:17:51.000000000 +0100 @@ -0,0 +1,221 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Alchemy Pb1200 board setup. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) +#include +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_MIPS_PB1200 +#include +#endif + +#ifdef CONFIG_MIPS_DB1200 +#include +#define PB1200_ETH_INT DB1200_ETH_INT +#define PB1200_IDE_INT DB1200_IDE_INT +#endif + +extern struct rtc_ops no_rtc_ops; + +extern void _board_init_irq(void); +extern void (*board_init_irq)(void); + +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX +extern struct ide_ops *ide_ops; +extern struct ide_ops au1xxx_ide_ops; +extern u32 au1xxx_ide_virtbase; +extern u64 au1xxx_ide_physbase; +extern int au1xxx_ide_irq; + +u32 led_base_addr; +/* Ddma */ +chan_tab_t *ide_read_ch, *ide_write_ch; +u32 au1xxx_ide_ddma_enable = 0, switch4ddma = 1; // PIO+ddma + +dbdev_tab_t new_dbdev_tab_element = { DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 }; +#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX */ + +void board_reset (void) +{ + bcsr->resets = 0; +} + +void board_power_off (void) +{ + bcsr->resets = 0xC000; +} + +void __init board_setup(void) +{ + char *argptr = NULL; + u32 pin_func; + rtc_ops = &no_rtc_ops; + +#if 0 + /* Enable PSC1 SYNC for AC97. Normaly done in audio driver, + * but it is board specific code, so put it here. + */ + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; + au_writel(pin_func, SYS_PINFUNC); + + au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */ + au_sync(); +#endif + +#if defined( CONFIG_I2C_ALGO_AU1550 ) + { + u32 freq0, clksrc; + + /* Select SMBUS in CPLD */ + bcsr->resets &= ~(BCSR_RESETS_PCS0MUX); + + pin_func = au_readl(SYS_PINFUNC); + au_sync(); + pin_func &= ~(3<<17 | 1<<4); + /* Set GPIOs correctly */ + pin_func |= 2<<17; + au_writel(pin_func, SYS_PINFUNC); + au_sync(); + + /* The i2c driver depends on 50Mhz clock */ + freq0 = au_readl(SYS_FREQCTRL0); + au_sync(); + freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); + freq0 |= (3<resets bit 12: 0=SMB 1=SPI + */ +#if defined(CONFIG_AU1550_PSC_SPI) && defined(CONFIG_I2C_ALGO_AU1550) + #error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\ + Refer to Pb1200/Db1200 documentation. +#elif defined( CONFIG_AU1550_PSC_SPI ) + bcsr->resets |= BCSR_RESETS_PCS0MUX; +#elif defined( CONFIG_I2C_ALGO_AU1550 ) + bcsr->resets &= (~BCSR_RESETS_PCS0MUX); +#endif + au_sync(); + +#ifdef CONFIG_MIPS_PB1200 + printk("AMD Alchemy Pb1200 Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1200 + printk("AMD Alchemy Db1200 Board\n"); +#endif + + /* Setup Pb1200 External Interrupt Controller */ + { + extern void (*board_init_irq)(void); + extern void _board_init_irq(void); + board_init_irq = _board_init_irq; + } +} + +int +board_au1200fb_panel (void) +{ + BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; + int p; + + p = bcsr->switches; + p >>= 8; + p &= 0x0F; + return p; +} + +int +board_au1200fb_panel_init (void) +{ + /* Apply power */ + BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; + bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL); + return 0; +} + +int +board_au1200fb_panel_shutdown (void) +{ + /* Remove power */ + BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; + bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL); + return 0; +} + diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1200/init.c linux-2.4.32-rc1.mips/arch/mips/au1000/pb1200/init.c --- linux-2.4.32-rc1/arch/mips/au1000/pb1200/init.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1200/init.c 2005-01-30 09:01:28.000000000 +0100 @@ -0,0 +1,72 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * PB1200 board setup + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +int prom_argc; +char **prom_argv, **prom_envp; +extern void __init prom_init_cmdline(void); +extern char *prom_getenv(char *envname); + +const char *get_system_type(void) +{ + return "AMD Alchemy Au1200/Pb1200"; +} + +u32 mae_memsize = 0; + +int __init prom_init(int argc, char **argv, char **envp, int *prom_vec) +{ + unsigned char *memsize_str; + unsigned long memsize; + + prom_argc = argc; + prom_argv = argv; + prom_envp = envp; + + mips_machgroup = MACH_GROUP_ALCHEMY; + mips_machtype = MACH_PB1000; /* set the platform # */ + prom_init_cmdline(); + + memsize_str = prom_getenv("memsize"); + if (!memsize_str) { + memsize = 0x08000000; + } else { + memsize = simple_strtol(memsize_str, NULL, 0); + } + add_memory_region(0, memsize, BOOT_MEM_RAM); + return 0; +} + diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1200/irqmap.c linux-2.4.32-rc1.mips/arch/mips/au1000/pb1200/irqmap.c --- linux-2.4.32-rc1/arch/mips/au1000/pb1200/irqmap.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1200/irqmap.c 2005-01-30 09:01:28.000000000 +0100 @@ -0,0 +1,180 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1xxx irq map table + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_MIPS_PB1200 +#include +#endif + +#ifdef CONFIG_MIPS_DB1200 +#include +#define PB1200_INT_BEGIN DB1200_INT_BEGIN +#define PB1200_INT_END DB1200_INT_END +#endif + +au1xxx_irq_map_t au1xxx_irq_map[] = { + { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade +}; + +int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t); + +/* + * Support for External interrupts on the PbAu1200 Development platform. + */ +static volatile int pb1200_cascade_en=0; + +void pb1200_cascade_handler( int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned short bisr = bcsr->int_status; + int extirq_nr = 0; + + /* Clear all the edge interrupts. This has no effect on level */ + bcsr->int_status = bisr; + for( ; bisr; bisr &= (bisr-1) ) + { + extirq_nr = (PB1200_INT_BEGIN-1) + au_ffs(bisr); + /* Ack and dispatch IRQ */ + do_IRQ(extirq_nr,regs); + } +} + +inline void pb1200_enable_irq(unsigned int irq_nr) +{ + bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN); + bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN); +} + +inline void pb1200_disable_irq(unsigned int irq_nr) +{ + bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN); + bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN); +} + +static unsigned int pb1200_startup_irq( unsigned int irq_nr ) +{ + if (++pb1200_cascade_en == 1) + { + request_irq(AU1000_GPIO_7, &pb1200_cascade_handler, + 0, "Pb1200 Cascade", &pb1200_cascade_handler ); +#ifdef CONFIG_MIPS_PB1200 + /* We have a problem with CPLD rev3. Enable a workaround */ + if( ((bcsr->whoami & BCSR_WHOAMI_CPLD)>>4) <= 3) + { + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n"); + printk("updated to latest revision. This software will not\n"); + printk("work on anything less than CPLD rev4\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + printk("\nWARNING!!!\n"); + while(1); + } +#endif + } + pb1200_enable_irq(irq_nr); + return 0; +} + +static void pb1200_shutdown_irq( unsigned int irq_nr ) +{ + pb1200_disable_irq(irq_nr); + if (--pb1200_cascade_en == 0) + { + free_irq(AU1000_GPIO_7,&pb1200_cascade_handler ); + } + return; +} + +static inline void pb1200_mask_and_ack_irq(unsigned int irq_nr) +{ + pb1200_disable_irq( irq_nr ); +} + +static void pb1200_end_irq(unsigned int irq_nr) +{ + if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))) { + pb1200_enable_irq(irq_nr); + } +} + +static struct hw_interrupt_type external_irq_type = +{ +#ifdef CONFIG_MIPS_PB1200 + "Pb1200 Ext", +#endif +#ifdef CONFIG_MIPS_DB1200 + "Db1200 Ext", +#endif + pb1200_startup_irq, + pb1200_shutdown_irq, + pb1200_enable_irq, + pb1200_disable_irq, + pb1200_mask_and_ack_irq, + pb1200_end_irq, + NULL +}; + +void _board_init_irq(void) +{ + int irq_nr; + + for (irq_nr = PB1200_INT_BEGIN; irq_nr <= PB1200_INT_END; irq_nr++) + { + irq_desc[irq_nr].handler = &external_irq_type; + pb1200_disable_irq(irq_nr); + } + + /* GPIO_7 can not be hooked here, so it is hooked upon first + request of any source attached to the cascade */ +} + diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1200/Makefile linux-2.4.32-rc1.mips/arch/mips/au1000/pb1200/Makefile --- linux-2.4.32-rc1/arch/mips/au1000/pb1200/Makefile 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1200/Makefile 2005-01-30 09:01:27.000000000 +0100 @@ -0,0 +1,25 @@ +# +# Copyright 2000 MontaVista Software Inc. +# Author: MontaVista Software, Inc. +# ppopov@mvista.com or source@mvista.com +# +# Makefile for the Alchemy Semiconductor PB1000 board. +# +# Note! Dependencies are done automagically by 'make dep', which also +# removes any old dependencies. DON'T put your own dependencies here +# unless it's something special (ie not a .c file). +# + +USE_STANDARD_AS_RULE := true + +O_TARGET := pb1200.o + +obj-y := init.o board_setup.o irqmap.o + +ifdef CONFIG_MMC +obj-y += mmc_support.o +export-objs +=mmc_support.o +endif + + +include $(TOPDIR)/Rules.make diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1200/mmc_support.c linux-2.4.32-rc1.mips/arch/mips/au1000/pb1200/mmc_support.c --- linux-2.4.32-rc1/arch/mips/au1000/pb1200/mmc_support.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1200/mmc_support.c 2005-01-30 09:01:28.000000000 +0100 @@ -0,0 +1,141 @@ +/* + * BRIEF MODULE DESCRIPTION + * + * MMC support routines for PB1200. + * + * + * Copyright (c) 2003-2004 Embedded Edge, LLC. + * Author: Embedded Edge, LLC. + * Contact: dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + + +#include +#include +#include +#include + +#include +#include +#include + +#ifdef CONFIG_MIPS_PB1200 +#include +#endif + +#ifdef CONFIG_MIPS_DB1200 +/* NOTE: DB1200 only has SD0 pinned out and usable */ +#include +#endif + +/* SD/MMC controller support functions */ + +/* + * Detect card. + */ +void mmc_card_inserted(int socket, int *result) +{ + u16 mask; + + if (socket) +#ifdef CONFIG_MIPS_DB1200 + mask = 0; +#else + mask = BCSR_INT_SD1INSERT; +#endif + else + mask = BCSR_INT_SD0INSERT; + + *result = ((bcsr->sig_status & mask) != 0); +} + +/* + * Check card write protection. + */ +void mmc_card_writable(int socket, int *result) +{ + u16 mask; + + if (socket) +#ifdef CONFIG_MIPS_DB1200 + mask = 0; +#else + mask = BCSR_STATUS_SD1WP; +#endif + else + mask = BCSR_STATUS_SD0WP; + + /* low means card writable */ + if (!(bcsr->status & mask)) { + *result = 1; + } else { + *result = 0; + } +} + +/* + * Apply power to card slot. + */ +void mmc_power_on(int socket) +{ + u16 mask; + + if (socket) +#ifdef CONFIG_MIPS_DB1200 + mask = 0; +#else + mask = BCSR_BOARD_SD1PWR; +#endif + else + mask = BCSR_BOARD_SD0PWR; + + bcsr->board |= mask; + au_sync_delay(1); +} + +/* + * Remove power from card slot. + */ +void mmc_power_off(int socket) +{ + u16 mask; + + if (socket) +#ifdef CONFIG_MIPS_DB1200 + mask = 0; +#else + mask = BCSR_BOARD_SD1PWR; +#endif + else + mask = BCSR_BOARD_SD0PWR; + + bcsr->board &= ~mask; + au_sync_delay(1); +} + +EXPORT_SYMBOL(mmc_card_inserted); +EXPORT_SYMBOL(mmc_card_writable); +EXPORT_SYMBOL(mmc_power_on); +EXPORT_SYMBOL(mmc_power_off); + diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1500/board_setup.c linux-2.4.32-rc1.mips/arch/mips/au1000/pb1500/board_setup.c --- linux-2.4.32-rc1/arch/mips/au1000/pb1500/board_setup.c 2005-01-19 15:09:26.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1500/board_setup.c 2005-03-19 08:17:51.000000000 +0100 @@ -62,6 +62,10 @@ au_writel(0x00000000, 0xAE00001C); } +void board_power_off (void) +{ +} + void __init board_setup(void) { u32 pin_func; diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1550/board_setup.c linux-2.4.32-rc1.mips/arch/mips/au1000/pb1550/board_setup.c --- linux-2.4.32-rc1/arch/mips/au1000/pb1550/board_setup.c 2005-01-19 15:09:26.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1550/board_setup.c 2005-03-19 08:17:51.000000000 +0100 @@ -48,12 +48,31 @@ extern struct rtc_ops no_rtc_ops; +#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) +extern struct ide_ops *ide_ops; +extern struct ide_ops au1xxx_ide_ops; +extern u32 au1xxx_ide_virtbase; +extern u64 au1xxx_ide_physbase; +extern unsigned int au1xxx_ide_irq; + +u32 au1xxx_ide_ddma_enable = 0, switch4ddma = 1; // PIO+ddma +#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX */ + void board_reset (void) { /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ au_writew(au_readw(0xAF00001C) & ~(1<<15), 0xAF00001C); } +void board_power_off (void) +{ + /* power off system */ + printk("\n** Powering off Pb1550\n"); + au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C); + au_sync(); + while(1); /* should not get here */ +} + void __init board_setup(void) { u32 pin_func; @@ -78,5 +97,36 @@ au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */ au_sync(); +#if defined(CONFIG_AU1XXX_SMC91111) +#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) +#error "Resource conflict occured. Disable either Ethernet or IDE daughter card." +#else +#define CPLD_CONTROL (0xAF00000C) + { + /* set up the Static Bus timing */ + /* only 396Mhz */ + /* reset the DC */ + au_writew(au_readw(CPLD_CONTROL) | 0x0f, CPLD_CONTROL); + au_writel(0x00010003, MEM_STCFG0); + au_writel(0x000c00c0, MEM_STCFG2); + au_writel(0x85E1900D, MEM_STTIME2); + } +#endif +#endif /* end CONFIG_SMC91111 */ + +#if defined(CONFIG_BLK_DEV_IDE_AU1XXX) + /* + * Iniz IDE parameters + */ + ide_ops = &au1xxx_ide_ops; + au1xxx_ide_irq = DAUGHTER_CARD_IRQ;; + au1xxx_ide_physbase = AU1XXX_ATA_PHYS_ADDR; + au1xxx_ide_virtbase = KSEG1ADDR(AU1XXX_ATA_PHYS_ADDR); + /* + * change PIO or PIO+Ddma + * check the GPIO-6 pin condition. pb1550:s15_dot + */ + switch4ddma = (au_readl(SYS_PINSTATERD) & (1 << 6)) ? 1 : 0; +#endif printk("AMD Alchemy Pb1550 Board\n"); } diff -Nur linux-2.4.32-rc1/arch/mips/au1000/pb1550/irqmap.c linux-2.4.32-rc1.mips/arch/mips/au1000/pb1550/irqmap.c --- linux-2.4.32-rc1/arch/mips/au1000/pb1550/irqmap.c 2005-01-19 15:09:26.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/au1000/pb1550/irqmap.c 2005-01-30 09:01:28.000000000 +0100 @@ -50,6 +50,9 @@ au1xxx_irq_map_t au1xxx_irq_map[] = { { AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, { AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, +#ifdef CONFIG_AU1XXX_SMC91111 + { AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, +#endif }; int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t); diff -Nur linux-2.4.32-rc1/arch/mips/config-shared.in linux-2.4.32-rc1.mips/arch/mips/config-shared.in --- linux-2.4.32-rc1/arch/mips/config-shared.in 2005-01-19 15:09:27.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/config-shared.in 2005-01-30 09:01:26.000000000 +0100 @@ -21,16 +21,19 @@ comment 'Machine selection' dep_bool 'Support for Acer PICA 1 chipset (EXPERIMENTAL)' CONFIG_ACER_PICA_61 $CONFIG_EXPERIMENTAL dep_bool 'Support for Alchemy Bosporus board' CONFIG_MIPS_BOSPORUS $CONFIG_MIPS32 +dep_bool 'Support for FIC Multimedia Player board' CONFIG_MIPS_FICMMP $CONFIG_MIPS32 dep_bool 'Support for Alchemy Mirage board' CONFIG_MIPS_MIRAGE $CONFIG_MIPS32 dep_bool 'Support for Alchemy Db1000 board' CONFIG_MIPS_DB1000 $CONFIG_MIPS32 dep_bool 'Support for Alchemy Db1100 board' CONFIG_MIPS_DB1100 $CONFIG_MIPS32 dep_bool 'Support for Alchemy Db1500 board' CONFIG_MIPS_DB1500 $CONFIG_MIPS32 dep_bool 'Support for Alchemy Db1550 board' CONFIG_MIPS_DB1550 $CONFIG_MIPS32 +dep_bool 'Support for Alchemy Db1200 board' CONFIG_MIPS_DB1200 $CONFIG_MIPS32 dep_bool 'Support for Alchemy PB1000 board' CONFIG_MIPS_PB1000 $CONFIG_MIPS32 dep_bool 'Support for Alchemy PB1100 board' CONFIG_MIPS_PB1100 $CONFIG_MIPS32 dep_bool 'Support for Alchemy PB1500 board' CONFIG_MIPS_PB1500 $CONFIG_MIPS32 -dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32 dep_bool 'Support for Alchemy PB1550 board' CONFIG_MIPS_PB1550 $CONFIG_MIPS32 +dep_bool 'Support for Alchemy PB1200 board' CONFIG_MIPS_PB1200 $CONFIG_MIPS32 +dep_bool 'Support for Alchemy Hydrogen3 board' CONFIG_MIPS_HYDROGEN3 $CONFIG_MIPS32 dep_bool 'Support for MyCable XXS1500 board' CONFIG_MIPS_XXS1500 $CONFIG_MIPS32 dep_bool 'Support for 4G Systems MTX-1 board' CONFIG_MIPS_MTX1 $CONFIG_MIPS32 dep_bool 'Support for Cogent CSB250 board' CONFIG_COGENT_CSB250 $CONFIG_MIPS32 @@ -249,6 +252,12 @@ define_bool CONFIG_PC_KEYB y define_bool CONFIG_NONCOHERENT_IO y fi +if [ "$CONFIG_MIPS_FICMMP" = "y" ]; then + define_bool CONFIG_SOC_AU1X00 y + define_bool CONFIG_SOC_AU1200 y + define_bool CONFIG_NONCOHERENT_IO y + define_bool CONFIG_PC_KEYB y +fi if [ "$CONFIG_MIPS_BOSPORUS" = "y" ]; then define_bool CONFIG_SOC_AU1X00 y define_bool CONFIG_SOC_AU1500 y @@ -263,6 +272,12 @@ define_bool CONFIG_SWAP_IO_SPACE_W y define_bool CONFIG_SWAP_IO_SPACE_L y fi +if [ "$CONFIG_MIPS_PB1500" = "y" ]; then + define_bool CONFIG_SOC_AU1X00 y + define_bool CONFIG_SOC_AU1500 y + define_bool CONFIG_NONCOHERENT_IO y + define_bool CONFIG_PC_KEYB y +fi if [ "$CONFIG_MIPS_PB1100" = "y" ]; then define_bool CONFIG_SOC_AU1X00 y define_bool CONFIG_SOC_AU1100 y @@ -271,9 +286,15 @@ define_bool CONFIG_SWAP_IO_SPACE_W y define_bool CONFIG_SWAP_IO_SPACE_L y fi -if [ "$CONFIG_MIPS_PB1500" = "y" ]; then +if [ "$CONFIG_MIPS_PB1550" = "y" ]; then define_bool CONFIG_SOC_AU1X00 y - define_bool CONFIG_SOC_AU1500 y + define_bool CONFIG_SOC_AU1550 y + define_bool CONFIG_NONCOHERENT_IO n + define_bool CONFIG_PC_KEYB y +fi +if [ "$CONFIG_MIPS_PB1200" = "y" ]; then + define_bool CONFIG_SOC_AU1X00 y + define_bool CONFIG_SOC_AU1200 y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PC_KEYB y fi @@ -290,18 +311,24 @@ define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PC_KEYB y fi +if [ "$CONFIG_MIPS_DB1100" = "y" ]; then + define_bool CONFIG_SOC_AU1X00 y + define_bool CONFIG_SOC_AU1100 y + define_bool CONFIG_NONCOHERENT_IO y + define_bool CONFIG_PC_KEYB y + define_bool CONFIG_SWAP_IO_SPACE y +fi if [ "$CONFIG_MIPS_DB1550" = "y" ]; then define_bool CONFIG_SOC_AU1X00 y define_bool CONFIG_SOC_AU1550 y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PC_KEYB y fi -if [ "$CONFIG_MIPS_DB1100" = "y" ]; then +if [ "$CONFIG_MIPS_DB1200" = "y" ]; then define_bool CONFIG_SOC_AU1X00 y - define_bool CONFIG_SOC_AU1100 y + define_bool CONFIG_SOC_AU1200 y define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PC_KEYB y - define_bool CONFIG_SWAP_IO_SPACE y fi if [ "$CONFIG_MIPS_HYDROGEN3" = "y" ]; then define_bool CONFIG_SOC_AU1X00 y @@ -327,12 +354,6 @@ define_bool CONFIG_NONCOHERENT_IO y define_bool CONFIG_PC_KEYB y fi -if [ "$CONFIG_MIPS_PB1550" = "y" ]; then - define_bool CONFIG_SOC_AU1X00 y - define_bool CONFIG_SOC_AU1550 y - define_bool CONFIG_NONCOHERENT_IO n - define_bool CONFIG_PC_KEYB y -fi if [ "$CONFIG_MIPS_COBALT" = "y" ]; then define_bool CONFIG_BOOT_ELF32 y define_bool CONFIG_COBALT_LCD y @@ -729,6 +750,13 @@ "$CONFIG_MIPS_PB1000" = "y" -o \ "$CONFIG_MIPS_PB1100" = "y" -o \ "$CONFIG_MIPS_PB1500" = "y" -o \ + "$CONFIG_MIPS_PB1550" = "y" -o \ + "$CONFIG_MIPS_PB1200" = "y" -o \ + "$CONFIG_MIPS_DB1000" = "y" -o \ + "$CONFIG_MIPS_DB1100" = "y" -o \ + "$CONFIG_MIPS_DB1500" = "y" -o \ + "$CONFIG_MIPS_DB1550" = "y" -o \ + "$CONFIG_MIPS_DB1200" = "y" -o \ "$CONFIG_NEC_OSPREY" = "y" -o \ "$CONFIG_NEC_EAGLE" = "y" -o \ "$CONFIG_NINO" = "y" -o \ diff -Nur linux-2.4.32-rc1/arch/mips/defconfig linux-2.4.32-rc1.mips/arch/mips/defconfig --- linux-2.4.32-rc1/arch/mips/defconfig 2005-01-19 15:09:27.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -235,11 +235,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -319,9 +314,11 @@ # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set @@ -465,7 +462,6 @@ # CONFIG_SERIAL is not set # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-atlas linux-2.4.32-rc1.mips/arch/mips/defconfig-atlas --- linux-2.4.32-rc1/arch/mips/defconfig-atlas 2005-01-19 15:09:27.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-atlas 2005-03-18 13:13:21.000000000 +0100 @@ -28,8 +28,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -235,11 +235,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -317,9 +312,11 @@ # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set @@ -528,7 +525,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-bosporus linux-2.4.32-rc1.mips/arch/mips/defconfig-bosporus --- linux-2.4.32-rc1/arch/mips/defconfig-bosporus 2005-01-19 15:09:27.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-bosporus 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -208,9 +208,7 @@ CONFIG_MTD_BOSPORUS=y # CONFIG_MTD_XXS1500 is not set # CONFIG_MTD_MTX1 is not set -# CONFIG_MTD_DB1X00 is not set # CONFIG_MTD_PB1550 is not set -# CONFIG_MTD_HYDROGEN3 is not set # CONFIG_MTD_MIRAGE is not set # CONFIG_MTD_CSTM_MIPS_IXX is not set # CONFIG_MTD_OCELOT is not set @@ -229,7 +227,6 @@ # # Disk-On-Chip Device Drivers # -# CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOCPROBE is not set @@ -373,11 +370,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -457,9 +449,11 @@ # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set @@ -681,7 +675,6 @@ # CONFIG_AU1X00_USB_TTY is not set # CONFIG_AU1X00_USB_RAW is not set # CONFIG_TXX927_SERIAL is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-capcella linux-2.4.32-rc1.mips/arch/mips/defconfig-capcella --- linux-2.4.32-rc1/arch/mips/defconfig-capcella 2005-01-19 15:09:27.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-capcella 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -228,11 +228,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -472,7 +467,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set # CONFIG_VR41XX_KIU is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-cobalt linux-2.4.32-rc1.mips/arch/mips/defconfig-cobalt --- linux-2.4.32-rc1/arch/mips/defconfig-cobalt 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-cobalt 2005-03-18 13:13:21.000000000 +0100 @@ -28,8 +28,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -222,11 +222,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -505,7 +500,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=16 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-csb250 linux-2.4.32-rc1.mips/arch/mips/defconfig-csb250 --- linux-2.4.32-rc1/arch/mips/defconfig-csb250 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-csb250 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set CONFIG_COGENT_CSB250=y @@ -268,11 +268,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -556,7 +551,6 @@ # CONFIG_AU1X00_USB_TTY is not set # CONFIG_AU1X00_USB_RAW is not set # CONFIG_TXX927_SERIAL is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-db1000 linux-2.4.32-rc1.mips/arch/mips/defconfig-db1000 --- linux-2.4.32-rc1/arch/mips/defconfig-db1000 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-db1000 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -214,11 +214,7 @@ # CONFIG_MTD_BOSPORUS is not set # CONFIG_MTD_XXS1500 is not set # CONFIG_MTD_MTX1 is not set -CONFIG_MTD_DB1X00=y -CONFIG_MTD_DB1X00_BOOT=y -CONFIG_MTD_DB1X00_USER=y # CONFIG_MTD_PB1550 is not set -# CONFIG_MTD_HYDROGEN3 is not set # CONFIG_MTD_MIRAGE is not set # CONFIG_MTD_CSTM_MIPS_IXX is not set # CONFIG_MTD_OCELOT is not set @@ -237,7 +233,6 @@ # # Disk-On-Chip Device Drivers # -# CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOCPROBE is not set @@ -342,11 +337,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -636,7 +626,6 @@ # CONFIG_AU1X00_USB_TTY is not set # CONFIG_AU1X00_USB_RAW is not set # CONFIG_TXX927_SERIAL is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-db1100 linux-2.4.32-rc1.mips/arch/mips/defconfig-db1100 --- linux-2.4.32-rc1/arch/mips/defconfig-db1100 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-db1100 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -214,11 +214,7 @@ # CONFIG_MTD_BOSPORUS is not set # CONFIG_MTD_XXS1500 is not set # CONFIG_MTD_MTX1 is not set -CONFIG_MTD_DB1X00=y -# CONFIG_MTD_DB1X00_BOOT is not set -CONFIG_MTD_DB1X00_USER=y # CONFIG_MTD_PB1550 is not set -# CONFIG_MTD_HYDROGEN3 is not set # CONFIG_MTD_MIRAGE is not set # CONFIG_MTD_CSTM_MIPS_IXX is not set # CONFIG_MTD_OCELOT is not set @@ -237,7 +233,6 @@ # # Disk-On-Chip Device Drivers # -# CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOCPROBE is not set @@ -342,11 +337,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -636,7 +626,6 @@ # CONFIG_AU1X00_USB_TTY is not set # CONFIG_AU1X00_USB_RAW is not set # CONFIG_TXX927_SERIAL is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 @@ -884,6 +873,7 @@ # CONFIG_FB_PM2 is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CYBER2000 is not set +CONFIG_FB_AU1100=y # CONFIG_FB_MATROX is not set # CONFIG_FB_ATY is not set # CONFIG_FB_RADEON is not set @@ -895,7 +885,6 @@ # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_E1356 is not set -CONFIG_FB_AU1100=y # CONFIG_FB_IT8181 is not set # CONFIG_FB_VIRTUAL is not set CONFIG_FBCON_ADVANCED=y diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-db1200 linux-2.4.32-rc1.mips/arch/mips/defconfig-db1200 --- linux-2.4.32-rc1/arch/mips/defconfig-db1200 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-db1200 2005-03-18 13:13:21.000000000 +0100 @@ -0,0 +1,1032 @@ +# +# Automatically generated make config: don't edit +# +CONFIG_MIPS=y +CONFIG_MIPS32=y +# CONFIG_MIPS64 is not set + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y + +# +# Loadable module support +# +CONFIG_MODULES=y +# CONFIG_MODVERSIONS is not set +CONFIG_KMOD=y + +# +# Machine selection +# +# CONFIG_ACER_PICA_61 is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set +# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MIPS_MTX1 is not set +# CONFIG_COGENT_CSB250 is not set +# CONFIG_BAGET_MIPS is not set +# CONFIG_CASIO_E55 is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_DECSTATION is not set +# CONFIG_MIPS_EV64120 is not set +# CONFIG_MIPS_EV96100 is not set +# CONFIG_MIPS_IVR is not set +# CONFIG_HP_LASERJET is not set +# CONFIG_IBM_WORKPAD is not set +# CONFIG_LASAT is not set +# CONFIG_MIPS_ITE8172 is not set +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_MAGNUM_4000 is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_MOMENCO_OCELOT_G is not set +# CONFIG_MOMENCO_OCELOT_C is not set +# CONFIG_MOMENCO_JAGUAR_ATX is not set +# CONFIG_PMC_BIG_SUR is not set +# CONFIG_PMC_STRETCH is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_DDB5074 is not set +# CONFIG_DDB5476 is not set +# CONFIG_DDB5477 is not set +# CONFIG_NEC_OSPREY is not set +# CONFIG_NEC_EAGLE is not set +# CONFIG_OLIVETTI_M700 is not set +# CONFIG_NINO is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SIBYTE_SB1xxx_SOC is not set +# CONFIG_SNI_RM200_PCI is not set +# CONFIG_TANBAC_TB0226 is not set +# CONFIG_TANBAC_TB0229 is not set +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +# CONFIG_VICTOR_MPC30X is not set +# CONFIG_ZAO_CAPCELLA is not set +# CONFIG_HIGHMEM is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_MIPS_AU1000 is not set + +# +# CPU selection +# +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS64 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +# CONFIG_VTAG_ICACHE is not set +CONFIG_64BIT_PHYS_ADDR=y +# CONFIG_CPU_ADVANCED is not set +CONFIG_CPU_HAS_LLSC=y +# CONFIG_CPU_HAS_LLDSCD is not set +# CONFIG_CPU_HAS_WB is not set +CONFIG_CPU_HAS_SYNC=y + +# +# General setup +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_BUILD_ELF64 is not set +CONFIG_NET=y +CONFIG_PCI=y +CONFIG_PCI_NEW=y +CONFIG_PCI_AUTO=y +# CONFIG_PCI_NAMES is not set +# CONFIG_ISA is not set +# CONFIG_TC is not set +# CONFIG_MCA is not set +# CONFIG_SBUS is not set +CONFIG_HOTPLUG=y + +# +# PCMCIA/CardBus support +# +CONFIG_PCMCIA=m +# CONFIG_CARDBUS is not set +# CONFIG_TCIC is not set +# CONFIG_I82092 is not set +# CONFIG_I82365 is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HOTPLUG_PCI_COMPAQ is not set +# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set +# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set +# CONFIG_HOTPLUG_PCI_PCIE is not set +# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set +CONFIG_SYSVIPC=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +CONFIG_KCORE_ELF=y +# CONFIG_KCORE_AOUT is not set +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_MIPS32_COMPAT is not set +# CONFIG_MIPS32_O32 is not set +# CONFIG_MIPS32_N32 is not set +# CONFIG_BINFMT_ELF32 is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_OOM_KILLER is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="mem=96M" + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play configuration +# +# CONFIG_PNP is not set +# CONFIG_ISAPNP is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_XD is not set +# CONFIG_PARIDE is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_CISS_SCSI_TAPE is not set +# CONFIG_CISS_MONITOR_THREAD is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_BLK_STATS is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set +# CONFIG_BLK_DEV_MD is not set +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_RAID0 is not set +# CONFIG_MD_RAID1 is not set +# CONFIG_MD_RAID5 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_BLK_DEV_LVM is not set + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +# CONFIG_NETLINK_DEV is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_FILTER=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_INET_ECN is not set +# CONFIG_SYN_COOKIES is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_NF_CONNTRACK is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_NF_COMPAT_IPCHAINS is not set +# CONFIG_IP_NF_COMPAT_IPFWADM is not set + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_KHTTPD is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_VLAN_8021Q is not set + +# +# +# +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_DECNET is not set +# CONFIG_BRIDGE is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_LLC is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_FASTROUTE is not set +# CONFIG_NET_HW_FLOWCONTROL is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set +# CONFIG_PHONE_IXJ is not set +# CONFIG_PHONE_IXJ_PCMCIA is not set + +# +# ATA/IDE/MFM/RLL support +# +CONFIG_IDE=y + +# +# IDE, ATA and ATAPI Block devices +# +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_HD_IDE is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_IDEDISK_STROKE=y +CONFIG_BLK_DEV_IDECS=m +# CONFIG_BLK_DEV_DELKIN is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_CMD640 is not set +# CONFIG_BLK_DEV_CMD640_ENHANCED is not set +# CONFIG_BLK_DEV_ISAPNP is not set +# CONFIG_BLK_DEV_IDEPCI is not set +# CONFIG_IDE_CHIPSETS is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_DMA_NONPCI is not set +# CONFIG_BLK_DEV_ATARAID is not set +# CONFIG_BLK_DEV_ATARAID_PDC is not set +# CONFIG_BLK_DEV_ATARAID_HPT is not set +# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set +# CONFIG_BLK_DEV_ATARAID_SII is not set + +# +# SCSI support +# +CONFIG_SCSI=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_SD_EXTRA_DEVS=40 +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_SR_EXTRA_DEVS=2 +# CONFIG_CHR_DEV_SG is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_DEBUG_QUEUES is not set +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_7000FASST is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AHA1542 is not set +# CONFIG_SCSI_AHA1740 is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_AM53C974 is not set +# CONFIG_SCSI_MEGARAID is not set +# CONFIG_SCSI_MEGARAID2 is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_SATA_AHCI is not set +# CONFIG_SCSI_SATA_SVW is not set +# CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_SX4 is not set +# CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIS is not set +# CONFIG_SCSI_SATA_ULI is not set +# CONFIG_SCSI_SATA_VIA is not set +# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_CPQFCTS is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_EATA_DMA is not set +# CONFIG_SCSI_EATA_PIO is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_NCR53C7xx is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_NCR53C8XX is not set +# CONFIG_SCSI_SYM53C8XX is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PCI2000 is not set +# CONFIG_SCSI_PCI2220I is not set +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_QLOGIC_ISP is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_SIM710 is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_U14_34F is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_SCSI_PCMCIA is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_BOOT is not set +# CONFIG_FUSION_ISENSE is not set +# CONFIG_FUSION_CTL is not set +# CONFIG_FUSION_LAN is not set + +# +# IEEE 1394 (FireWire) support (EXPERIMENTAL) +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set +# CONFIG_I2O_PCI is not set +# CONFIG_I2O_BLOCK is not set +# CONFIG_I2O_LAN is not set +# CONFIG_I2O_SCSI is not set +# CONFIG_I2O_PROC is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_ETHERTAP is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_SUNLANCE is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNBMAC is not set +# CONFIG_SUNQE is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_LANCE is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +# CONFIG_NET_PCI is not set +# CONFIG_NET_POCKET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_MYRI_SBUS is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PLIP is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set +# CONFIG_NET_FC is not set +# CONFIG_RCPCI is not set +# CONFIG_SHAPER is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set + +# +# PCMCIA network device support +# +# CONFIG_NET_PCMCIA is not set + +# +# Amateur Radio support +# +# CONFIG_HAMRADIO is not set + +# +# IrDA (infrared) support +# +# CONFIG_IRDA is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input core support +# +CONFIG_INPUT=y +CONFIG_INPUT_KEYBDEV=y +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_UINPUT is not set + +# +# Character devices +# +CONFIG_VT=y +# CONFIG_VT_CONSOLE is not set +# CONFIG_SERIAL is not set +# CONFIG_SERIAL_EXTENDED is not set +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_DIGI is not set +# CONFIG_ESPSERIAL is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set +# CONFIG_SERIAL_TX3912 is not set +# CONFIG_SERIAL_TX3912_CONSOLE is not set +# CONFIG_SERIAL_TXX9 is not set +# CONFIG_SERIAL_TXX9_CONSOLE is not set +# CONFIG_TXX927_SERIAL is not set +CONFIG_UNIX98_PTYS=y +CONFIG_UNIX98_PTY_COUNT=256 + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Mice +# +# CONFIG_BUSMOUSE is not set +# CONFIG_MOUSE is not set + +# +# Joysticks +# +# CONFIG_INPUT_GAMEPORT is not set +# CONFIG_INPUT_NS558 is not set +# CONFIG_INPUT_LIGHTNING is not set +# CONFIG_INPUT_PCIGAME is not set +# CONFIG_INPUT_CS461X is not set +# CONFIG_INPUT_EMU10K1 is not set +# CONFIG_INPUT_SERIO is not set +# CONFIG_INPUT_SERPORT is not set + +# +# Joysticks +# +# CONFIG_INPUT_ANALOG is not set +# CONFIG_INPUT_A3D is not set +# CONFIG_INPUT_ADI is not set +# CONFIG_INPUT_COBRA is not set +# CONFIG_INPUT_GF2K is not set +# CONFIG_INPUT_GRIP is not set +# CONFIG_INPUT_INTERACT is not set +# CONFIG_INPUT_TMDC is not set +# CONFIG_INPUT_SIDEWINDER is not set +# CONFIG_INPUT_IFORCE_USB is not set +# CONFIG_INPUT_IFORCE_232 is not set +# CONFIG_INPUT_WARRIOR is not set +# CONFIG_INPUT_MAGELLAN is not set +# CONFIG_INPUT_SPACEORB is not set +# CONFIG_INPUT_SPACEBALL is not set +# CONFIG_INPUT_STINGER is not set +# CONFIG_INPUT_DB9 is not set +# CONFIG_INPUT_GAMECON is not set +# CONFIG_INPUT_TURBOGRAFX is not set +# CONFIG_QIC02_TAPE is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_IPMI_PANIC_EVENT is not set +# CONFIG_IPMI_DEVICE_INTERFACE is not set +# CONFIG_IPMI_KCS is not set +# CONFIG_IPMI_WATCHDOG is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_SCx200 is not set +# CONFIG_SCx200_GPIO is not set +# CONFIG_AMD_PM768 is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_FTAPE is not set +# CONFIG_AGP is not set + +# +# Direct Rendering Manager (XFree86 DRI support) +# +# CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_PCMCIA_SERIAL_CS is not set +# CONFIG_SYNCLINK_CS is not set + +# +# File systems +# +# CONFIG_QUOTA is not set +# CONFIG_QFMT_V2 is not set +CONFIG_AUTOFS_FS=y +# CONFIG_AUTOFS4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_ADFS_FS is not set +# CONFIG_ADFS_FS_RW is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BEFS_DEBUG is not set +# CONFIG_BFS_FS is not set +CONFIG_EXT3_FS=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +# CONFIG_UMSDOS_FS is not set +CONFIG_VFAT_FS=y +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +CONFIG_TMPFS=y +CONFIG_RAMFS=y +# CONFIG_ISO9660_FS is not set +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set +# CONFIG_JFS_FS is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_NTFS_FS is not set +# CONFIG_NTFS_RW is not set +# CONFIG_HPFS_FS is not set +CONFIG_PROC_FS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVFS_MOUNT is not set +# CONFIG_DEVFS_DEBUG is not set +CONFIG_DEVPTS_FS=y +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX4FS_RW is not set +# CONFIG_ROMFS_FS is not set +CONFIG_EXT2_FS=y +# CONFIG_SYSV_FS is not set +# CONFIG_UDF_FS is not set +# CONFIG_UDF_RW is not set +# CONFIG_UFS_FS is not set +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_XFS_FS is not set +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_TRACE is not set +# CONFIG_XFS_DEBUG is not set + +# +# Network File Systems +# +# CONFIG_CODA_FS is not set +# CONFIG_INTERMEZZO_FS is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +# CONFIG_NFSD_V3 is not set +# CONFIG_NFSD_TCP is not set +CONFIG_SUNRPC=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +# CONFIG_SMB_FS is not set +# CONFIG_NCP_FS is not set +# CONFIG_NCPFS_PACKET_SIGNING is not set +# CONFIG_NCPFS_IOCTL_LOCKING is not set +# CONFIG_NCPFS_STRONG is not set +# CONFIG_NCPFS_NFS_NS is not set +# CONFIG_NCPFS_OS2_NS is not set +# CONFIG_NCPFS_SMALLDOS is not set +# CONFIG_NCPFS_NLS is not set +# CONFIG_NCPFS_EXTRAS is not set +# CONFIG_ZISOFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_SMB_NLS is not set +CONFIG_NLS=y + +# +# Native Language Support +# +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Console drivers +# +# CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set + +# +# Frame-buffer support +# +CONFIG_FB=y +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FB_RIVA is not set +# CONFIG_FB_CLGEN is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_INTEL is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_E1356 is not set +# CONFIG_FB_IT8181 is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_FBCON_ADVANCED=y +# CONFIG_FBCON_MFB is not set +# CONFIG_FBCON_CFB2 is not set +# CONFIG_FBCON_CFB4 is not set +# CONFIG_FBCON_CFB8 is not set +CONFIG_FBCON_CFB16=y +# CONFIG_FBCON_CFB24 is not set +CONFIG_FBCON_CFB32=y +# CONFIG_FBCON_AFB is not set +# CONFIG_FBCON_ILBM is not set +# CONFIG_FBCON_IPLAN2P2 is not set +# CONFIG_FBCON_IPLAN2P4 is not set +# CONFIG_FBCON_IPLAN2P8 is not set +# CONFIG_FBCON_MAC is not set +# CONFIG_FBCON_VGA_PLANES is not set +# CONFIG_FBCON_VGA is not set +# CONFIG_FBCON_HGA is not set +# CONFIG_FBCON_FONTWIDTH8_ONLY is not set +CONFIG_FBCON_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set + +# +# Sound +# +CONFIG_SOUND=y +# CONFIG_SOUND_ALI5455 is not set +# CONFIG_SOUND_BT878 is not set +# CONFIG_SOUND_CMPCI is not set +# CONFIG_SOUND_EMU10K1 is not set +# CONFIG_MIDI_EMU10K1 is not set +# CONFIG_SOUND_FUSION is not set +# CONFIG_SOUND_CS4281 is not set +# CONFIG_SOUND_ES1370 is not set +# CONFIG_SOUND_ES1371 is not set +# CONFIG_SOUND_ESSSOLO1 is not set +# CONFIG_SOUND_MAESTRO is not set +# CONFIG_SOUND_MAESTRO3 is not set +# CONFIG_SOUND_FORTE is not set +# CONFIG_SOUND_ICH is not set +# CONFIG_SOUND_RME96XX is not set +# CONFIG_SOUND_SONICVIBES is not set +# CONFIG_SOUND_TRIDENT is not set +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set +# CONFIG_SOUND_VIA82CXXX is not set +# CONFIG_MIDI_VIA82CXXX is not set +# CONFIG_SOUND_OSS is not set +# CONFIG_SOUND_TVMIXER is not set +# CONFIG_SOUND_AD1980 is not set +# CONFIG_SOUND_WM97XX is not set + +# +# USB support +# +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_UHCI is not set +# CONFIG_USB_UHCI_ALT is not set +CONFIG_USB_OHCI=y + +# +# USB Device Class drivers +# +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_BLUETOOTH is not set +# CONFIG_USB_MIDI is not set +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# USB Human Interface Devices (HID) +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +CONFIG_USB_HIDDEV=y +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set + +# +# USB Imaging devices +# +# CONFIG_USB_DC2XX is not set +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_SCANNER is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_HPUSBSCSI is not set + +# +# USB Multimedia devices +# + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network adaptors +# +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_CATC is not set +# CONFIG_USB_CDCETHER is not set +# CONFIG_USB_USBNET is not set + +# +# USB port drivers +# +# CONFIG_USB_USS720 is not set + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_TIGL is not set +# CONFIG_USB_BRLVGER is not set +# CONFIG_USB_LCD is not set + +# +# Support for USB gadgets +# +# CONFIG_USB_GADGET is not set + +# +# Bluetooth support +# +# CONFIG_BLUEZ is not set + +# +# Kernel hacking +# +CONFIG_CROSSCOMPILE=y +# CONFIG_RUNTIME_DEBUG is not set +# CONFIG_KGDB is not set +# CONFIG_GDB_CONSOLE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_MIPS_UNCACHED is not set +CONFIG_LOG_BUF_SHIFT=0 + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +# CONFIG_CRC32 is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +# CONFIG_FW_LOADER is not set diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-db1500 linux-2.4.32-rc1.mips/arch/mips/defconfig-db1500 --- linux-2.4.32-rc1/arch/mips/defconfig-db1500 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-db1500 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -267,11 +267,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -555,7 +550,6 @@ # CONFIG_AU1X00_USB_TTY is not set # CONFIG_AU1X00_USB_RAW is not set # CONFIG_TXX927_SERIAL is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-db1550 linux-2.4.32-rc1.mips/arch/mips/defconfig-db1550 --- linux-2.4.32-rc1/arch/mips/defconfig-db1550 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-db1550 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -213,11 +213,9 @@ # CONFIG_MTD_BOSPORUS is not set # CONFIG_MTD_XXS1500 is not set # CONFIG_MTD_MTX1 is not set -# CONFIG_MTD_DB1X00 is not set CONFIG_MTD_PB1550=y CONFIG_MTD_PB1550_BOOT=y CONFIG_MTD_PB1550_USER=y -# CONFIG_MTD_HYDROGEN3 is not set # CONFIG_MTD_MIRAGE is not set # CONFIG_MTD_CSTM_MIPS_IXX is not set # CONFIG_MTD_OCELOT is not set @@ -236,7 +234,6 @@ # # Disk-On-Chip Device Drivers # -# CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOCPROBE is not set @@ -343,11 +340,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -633,7 +625,6 @@ # CONFIG_AU1X00_USB_TTY is not set # CONFIG_AU1X00_USB_RAW is not set # CONFIG_TXX927_SERIAL is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-ddb5476 linux-2.4.32-rc1.mips/arch/mips/defconfig-ddb5476 --- linux-2.4.32-rc1/arch/mips/defconfig-ddb5476 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-ddb5476 2005-03-18 13:13:21.000000000 +0100 @@ -28,8 +28,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -226,11 +226,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -517,7 +512,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-ddb5477 linux-2.4.32-rc1.mips/arch/mips/defconfig-ddb5477 --- linux-2.4.32-rc1/arch/mips/defconfig-ddb5477 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-ddb5477 2005-03-18 13:13:21.000000000 +0100 @@ -28,8 +28,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -226,11 +226,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -434,7 +429,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-decstation linux-2.4.32-rc1.mips/arch/mips/defconfig-decstation --- linux-2.4.32-rc1/arch/mips/defconfig-decstation 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-decstation 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -223,11 +223,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -306,9 +301,11 @@ # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set @@ -477,7 +474,6 @@ CONFIG_SERIAL_DEC_CONSOLE=y CONFIG_DZ=y CONFIG_ZS=y -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-e55 linux-2.4.32-rc1.mips/arch/mips/defconfig-e55 --- linux-2.4.32-rc1/arch/mips/defconfig-e55 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-e55 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -222,11 +222,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -426,7 +421,6 @@ # CONFIG_SERIAL_MULTIPORT is not set # CONFIG_HUB6 is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set # CONFIG_VR41XX_KIU is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-eagle linux-2.4.32-rc1.mips/arch/mips/defconfig-eagle --- linux-2.4.32-rc1/arch/mips/defconfig-eagle 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-eagle 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -208,8 +208,8 @@ # Mapping drivers for chip access # CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=1c000000 -CONFIG_MTD_PHYSMAP_LEN=2000000 +CONFIG_MTD_PHYSMAP_START=0x1c000000 +CONFIG_MTD_PHYSMAP_LEN=0x2000000 CONFIG_MTD_PHYSMAP_BUSWIDTH=4 # CONFIG_MTD_PB1000 is not set # CONFIG_MTD_PB1500 is not set @@ -217,9 +217,7 @@ # CONFIG_MTD_BOSPORUS is not set # CONFIG_MTD_XXS1500 is not set # CONFIG_MTD_MTX1 is not set -# CONFIG_MTD_DB1X00 is not set # CONFIG_MTD_PB1550 is not set -# CONFIG_MTD_HYDROGEN3 is not set # CONFIG_MTD_MIRAGE is not set # CONFIG_MTD_CSTM_MIPS_IXX is not set # CONFIG_MTD_OCELOT is not set @@ -238,7 +236,6 @@ # # Disk-On-Chip Device Drivers # -# CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOCPROBE is not set @@ -327,11 +324,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -587,7 +579,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set # CONFIG_VR41XX_KIU is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-ev64120 linux-2.4.32-rc1.mips/arch/mips/defconfig-ev64120 --- linux-2.4.32-rc1/arch/mips/defconfig-ev64120 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-ev64120 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -230,11 +230,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -443,7 +438,6 @@ # CONFIG_SERIAL_CONSOLE is not set # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-ev96100 linux-2.4.32-rc1.mips/arch/mips/defconfig-ev96100 --- linux-2.4.32-rc1/arch/mips/defconfig-ev96100 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-ev96100 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -232,11 +232,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -441,7 +436,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-ficmmp linux-2.4.32-rc1.mips/arch/mips/defconfig-ficmmp --- linux-2.4.32-rc1/arch/mips/defconfig-ficmmp 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-ficmmp 2005-03-18 13:13:21.000000000 +0100 @@ -0,0 +1,862 @@ +# +# Automatically generated make config: don't edit +# +CONFIG_MIPS=y +CONFIG_MIPS32=y +# CONFIG_MIPS64 is not set + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y + +# +# Loadable module support +# +CONFIG_MODULES=y +# CONFIG_MODVERSIONS is not set +CONFIG_KMOD=y + +# +# Machine selection +# +# CONFIG_ACER_PICA_61 is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set +# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MIPS_MTX1 is not set +# CONFIG_COGENT_CSB250 is not set +# CONFIG_BAGET_MIPS is not set +# CONFIG_CASIO_E55 is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_DECSTATION is not set +# CONFIG_MIPS_EV64120 is not set +# CONFIG_MIPS_EV96100 is not set +# CONFIG_MIPS_IVR is not set +# CONFIG_HP_LASERJET is not set +# CONFIG_IBM_WORKPAD is not set +# CONFIG_LASAT is not set +# CONFIG_MIPS_ITE8172 is not set +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_MAGNUM_4000 is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_MOMENCO_OCELOT_G is not set +# CONFIG_MOMENCO_OCELOT_C is not set +# CONFIG_MOMENCO_JAGUAR_ATX is not set +# CONFIG_PMC_BIG_SUR is not set +# CONFIG_PMC_STRETCH is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_DDB5074 is not set +# CONFIG_DDB5476 is not set +# CONFIG_DDB5477 is not set +# CONFIG_NEC_OSPREY is not set +# CONFIG_NEC_EAGLE is not set +# CONFIG_OLIVETTI_M700 is not set +# CONFIG_NINO is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SIBYTE_SB1xxx_SOC is not set +# CONFIG_SNI_RM200_PCI is not set +# CONFIG_TANBAC_TB0226 is not set +# CONFIG_TANBAC_TB0229 is not set +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +# CONFIG_VICTOR_MPC30X is not set +# CONFIG_ZAO_CAPCELLA is not set +# CONFIG_HIGHMEM is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_MIPS_AU1000 is not set + +# +# CPU selection +# +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS64 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +# CONFIG_VTAG_ICACHE is not set +CONFIG_64BIT_PHYS_ADDR=y +# CONFIG_CPU_ADVANCED is not set +CONFIG_CPU_HAS_LLSC=y +# CONFIG_CPU_HAS_LLDSCD is not set +# CONFIG_CPU_HAS_WB is not set +CONFIG_CPU_HAS_SYNC=y + +# +# General setup +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_BUILD_ELF64 is not set +CONFIG_NET=y +# CONFIG_PCI is not set +# CONFIG_PCI_NEW is not set +CONFIG_PCI_AUTO=y +# CONFIG_ISA is not set +# CONFIG_TC is not set +# CONFIG_MCA is not set +# CONFIG_SBUS is not set +# CONFIG_HOTPLUG is not set +# CONFIG_PCMCIA is not set +# CONFIG_HOTPLUG_PCI is not set +CONFIG_SYSVIPC=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +CONFIG_KCORE_ELF=y +# CONFIG_KCORE_AOUT is not set +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_MIPS32_COMPAT is not set +# CONFIG_MIPS32_O32 is not set +# CONFIG_MIPS32_N32 is not set +# CONFIG_BINFMT_ELF32 is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_OOM_KILLER is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="ide3=dma mem=96M root=/dev/hda2 rootflags=data=journal" + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play configuration +# +# CONFIG_PNP is not set +# CONFIG_ISAPNP is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_XD is not set +# CONFIG_PARIDE is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_CISS_SCSI_TAPE is not set +# CONFIG_CISS_MONITOR_THREAD is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_BLK_STATS is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set +# CONFIG_BLK_DEV_MD is not set +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_RAID0 is not set +# CONFIG_MD_RAID1 is not set +# CONFIG_MD_RAID5 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_BLK_DEV_LVM is not set + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +# CONFIG_NETLINK_DEV is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_FILTER=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_INET_ECN is not set +# CONFIG_SYN_COOKIES is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_NF_CONNTRACK is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_NF_COMPAT_IPCHAINS is not set +# CONFIG_IP_NF_COMPAT_IPFWADM is not set + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_KHTTPD is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_VLAN_8021Q is not set + +# +# +# +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_DECNET is not set +# CONFIG_BRIDGE is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_LLC is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_FASTROUTE is not set +# CONFIG_NET_HW_FLOWCONTROL is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set +# CONFIG_PHONE_IXJ is not set +# CONFIG_PHONE_IXJ_PCMCIA is not set + +# +# ATA/IDE/MFM/RLL support +# +CONFIG_IDE=y + +# +# IDE, ATA and ATAPI Block devices +# +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +CONFIG_BLK_DEV_HD_IDE=y +CONFIG_BLK_DEV_HD=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_IDEDISK_STROKE=y +# CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_DELKIN is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_CMD640 is not set +# CONFIG_BLK_DEV_CMD640_ENHANCED is not set +# CONFIG_BLK_DEV_ISAPNP is not set +# CONFIG_IDE_CHIPSETS is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_DMA_NONPCI is not set +# CONFIG_BLK_DEV_ATARAID is not set +# CONFIG_BLK_DEV_ATARAID_PDC is not set +# CONFIG_BLK_DEV_ATARAID_HPT is not set +# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set +# CONFIG_BLK_DEV_ATARAID_SII is not set + +# +# SCSI support +# +CONFIG_SCSI=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_SD_EXTRA_DEVS=40 +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_SR_EXTRA_DEVS=2 +# CONFIG_CHR_DEV_SG is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_DEBUG_QUEUES is not set +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI low-level drivers +# +# CONFIG_SCSI_7000FASST is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AHA1542 is not set +# CONFIG_SCSI_AHA1740 is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_AM53C974 is not set +# CONFIG_SCSI_MEGARAID is not set +# CONFIG_SCSI_MEGARAID2 is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_SATA_AHCI is not set +# CONFIG_SCSI_SATA_SVW is not set +# CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_SX4 is not set +# CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIS is not set +# CONFIG_SCSI_SATA_ULI is not set +# CONFIG_SCSI_SATA_VIA is not set +# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_EATA_DMA is not set +# CONFIG_SCSI_EATA_PIO is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_NCR53C7xx is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PCI2000 is not set +# CONFIG_SCSI_PCI2220I is not set +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_SIM710 is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_U14_34F is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_BOOT is not set +# CONFIG_FUSION_ISENSE is not set +# CONFIG_FUSION_CTL is not set +# CONFIG_FUSION_LAN is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_ETHERTAP is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_SUNLANCE is not set +# CONFIG_SUNBMAC is not set +# CONFIG_SUNQE is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_LANCE is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_NET_ISA is not set +# CONFIG_NET_PCI is not set +# CONFIG_NET_POCKET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_MYRI_SBUS is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PLIP is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set +# CONFIG_NET_FC is not set +# CONFIG_RCPCI is not set +# CONFIG_SHAPER is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set + +# +# Amateur Radio support +# +# CONFIG_HAMRADIO is not set + +# +# IrDA (infrared) support +# +# CONFIG_IRDA is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input core support +# +CONFIG_INPUT=y +CONFIG_INPUT_KEYBDEV=y +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_UINPUT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +# CONFIG_SERIAL is not set +# CONFIG_SERIAL_EXTENDED is not set +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_DIGI is not set +# CONFIG_ESPSERIAL is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set +# CONFIG_SERIAL_TX3912 is not set +# CONFIG_SERIAL_TX3912_CONSOLE is not set +# CONFIG_SERIAL_TXX9 is not set +# CONFIG_SERIAL_TXX9_CONSOLE is not set +# CONFIG_TXX927_SERIAL is not set +CONFIG_UNIX98_PTYS=y +CONFIG_UNIX98_PTY_COUNT=256 + +# +# I2C support +# +CONFIG_I2C=y +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_CHARDEV is not set +# CONFIG_I2C_PROC is not set + +# +# Mice +# +# CONFIG_BUSMOUSE is not set +# CONFIG_MOUSE is not set + +# +# Joysticks +# +# CONFIG_INPUT_GAMEPORT is not set +# CONFIG_INPUT_NS558 is not set +# CONFIG_INPUT_LIGHTNING is not set +# CONFIG_INPUT_PCIGAME is not set +# CONFIG_INPUT_CS461X is not set +# CONFIG_INPUT_EMU10K1 is not set +# CONFIG_INPUT_SERIO is not set +# CONFIG_INPUT_SERPORT is not set + +# +# Joysticks +# +# CONFIG_INPUT_ANALOG is not set +# CONFIG_INPUT_A3D is not set +# CONFIG_INPUT_ADI is not set +# CONFIG_INPUT_COBRA is not set +# CONFIG_INPUT_GF2K is not set +# CONFIG_INPUT_GRIP is not set +# CONFIG_INPUT_INTERACT is not set +# CONFIG_INPUT_TMDC is not set +# CONFIG_INPUT_SIDEWINDER is not set +# CONFIG_INPUT_IFORCE_USB is not set +# CONFIG_INPUT_IFORCE_232 is not set +# CONFIG_INPUT_WARRIOR is not set +# CONFIG_INPUT_MAGELLAN is not set +# CONFIG_INPUT_SPACEORB is not set +# CONFIG_INPUT_SPACEBALL is not set +# CONFIG_INPUT_STINGER is not set +# CONFIG_INPUT_DB9 is not set +# CONFIG_INPUT_GAMECON is not set +# CONFIG_INPUT_TURBOGRAFX is not set +# CONFIG_QIC02_TAPE is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_IPMI_PANIC_EVENT is not set +# CONFIG_IPMI_DEVICE_INTERFACE is not set +# CONFIG_IPMI_KCS is not set +# CONFIG_IPMI_WATCHDOG is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_SCx200 is not set +# CONFIG_SCx200_GPIO is not set +# CONFIG_AMD_PM768 is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_FTAPE is not set +# CONFIG_AGP is not set + +# +# Direct Rendering Manager (XFree86 DRI support) +# +# CONFIG_DRM is not set + +# +# File systems +# +# CONFIG_QUOTA is not set +# CONFIG_QFMT_V2 is not set +CONFIG_AUTOFS_FS=y +# CONFIG_AUTOFS4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_ADFS_FS is not set +# CONFIG_ADFS_FS_RW is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BEFS_DEBUG is not set +# CONFIG_BFS_FS is not set +CONFIG_EXT3_FS=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +# CONFIG_UMSDOS_FS is not set +CONFIG_VFAT_FS=y +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_TMPFS is not set +CONFIG_RAMFS=y +# CONFIG_ISO9660_FS is not set +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set +# CONFIG_JFS_FS is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_NTFS_FS is not set +# CONFIG_NTFS_RW is not set +# CONFIG_HPFS_FS is not set +CONFIG_PROC_FS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVFS_MOUNT is not set +# CONFIG_DEVFS_DEBUG is not set +CONFIG_DEVPTS_FS=y +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX4FS_RW is not set +# CONFIG_ROMFS_FS is not set +CONFIG_EXT2_FS=y +# CONFIG_SYSV_FS is not set +# CONFIG_UDF_FS is not set +# CONFIG_UDF_RW is not set +# CONFIG_UFS_FS is not set +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_XFS_FS is not set +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_TRACE is not set +# CONFIG_XFS_DEBUG is not set + +# +# Network File Systems +# +# CONFIG_CODA_FS is not set +# CONFIG_INTERMEZZO_FS is not set +# CONFIG_NFS_FS is not set +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_ROOT_NFS is not set +# CONFIG_NFSD is not set +# CONFIG_NFSD_V3 is not set +# CONFIG_NFSD_TCP is not set +# CONFIG_SUNRPC is not set +# CONFIG_LOCKD is not set +# CONFIG_SMB_FS is not set +# CONFIG_NCP_FS is not set +# CONFIG_NCPFS_PACKET_SIGNING is not set +# CONFIG_NCPFS_IOCTL_LOCKING is not set +# CONFIG_NCPFS_STRONG is not set +# CONFIG_NCPFS_NFS_NS is not set +# CONFIG_NCPFS_OS2_NS is not set +# CONFIG_NCPFS_SMALLDOS is not set +# CONFIG_NCPFS_NLS is not set +# CONFIG_NCPFS_EXTRAS is not set +# CONFIG_ZISOFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_SMB_NLS is not set +CONFIG_NLS=y + +# +# Native Language Support +# +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Console drivers +# +# CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set + +# +# Frame-buffer support +# +CONFIG_FB=y +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_FBCON_ADVANCED=y +# CONFIG_FBCON_MFB is not set +# CONFIG_FBCON_CFB2 is not set +# CONFIG_FBCON_CFB4 is not set +# CONFIG_FBCON_CFB8 is not set +CONFIG_FBCON_CFB16=y +# CONFIG_FBCON_CFB24 is not set +# CONFIG_FBCON_CFB32 is not set +# CONFIG_FBCON_AFB is not set +# CONFIG_FBCON_ILBM is not set +# CONFIG_FBCON_IPLAN2P2 is not set +# CONFIG_FBCON_IPLAN2P4 is not set +# CONFIG_FBCON_IPLAN2P8 is not set +# CONFIG_FBCON_MAC is not set +# CONFIG_FBCON_VGA_PLANES is not set +# CONFIG_FBCON_VGA is not set +# CONFIG_FBCON_HGA is not set +# CONFIG_FBCON_FONTWIDTH8_ONLY is not set +CONFIG_FBCON_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set + +# +# Sound +# +CONFIG_SOUND=y +# CONFIG_SOUND_ALI5455 is not set +# CONFIG_SOUND_BT878 is not set +# CONFIG_SOUND_CMPCI is not set +# CONFIG_SOUND_EMU10K1 is not set +# CONFIG_MIDI_EMU10K1 is not set +# CONFIG_SOUND_FUSION is not set +# CONFIG_SOUND_CS4281 is not set +# CONFIG_SOUND_ES1370 is not set +# CONFIG_SOUND_ES1371 is not set +# CONFIG_SOUND_ESSSOLO1 is not set +# CONFIG_SOUND_MAESTRO is not set +# CONFIG_SOUND_MAESTRO3 is not set +# CONFIG_SOUND_FORTE is not set +# CONFIG_SOUND_ICH is not set +# CONFIG_SOUND_RME96XX is not set +# CONFIG_SOUND_SONICVIBES is not set +# CONFIG_SOUND_TRIDENT is not set +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set +# CONFIG_SOUND_VIA82CXXX is not set +# CONFIG_MIDI_VIA82CXXX is not set +# CONFIG_SOUND_OSS is not set +# CONFIG_SOUND_TVMIXER is not set +# CONFIG_SOUND_AD1980 is not set +# CONFIG_SOUND_WM97XX is not set + +# +# USB support +# +# CONFIG_USB is not set + +# +# Support for USB gadgets +# +# CONFIG_USB_GADGET is not set + +# +# Bluetooth support +# +# CONFIG_BLUEZ is not set + +# +# Kernel hacking +# +CONFIG_CROSSCOMPILE=y +# CONFIG_RUNTIME_DEBUG is not set +# CONFIG_KGDB is not set +# CONFIG_GDB_CONSOLE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_MIPS_UNCACHED is not set +CONFIG_LOG_BUF_SHIFT=0 + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +# CONFIG_CRC32 is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-hp-lj linux-2.4.32-rc1.mips/arch/mips/defconfig-hp-lj --- linux-2.4.32-rc1/arch/mips/defconfig-hp-lj 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-hp-lj 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -184,8 +184,8 @@ # Mapping drivers for chip access # CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=10040000 -CONFIG_MTD_PHYSMAP_LEN=00fc0000 +CONFIG_MTD_PHYSMAP_START=0x10040000 +CONFIG_MTD_PHYSMAP_LEN=0x00fc0000 CONFIG_MTD_PHYSMAP_BUSWIDTH=4 # CONFIG_MTD_PB1000 is not set # CONFIG_MTD_PB1500 is not set @@ -193,9 +193,7 @@ # CONFIG_MTD_BOSPORUS is not set # CONFIG_MTD_XXS1500 is not set # CONFIG_MTD_MTX1 is not set -# CONFIG_MTD_DB1X00 is not set # CONFIG_MTD_PB1550 is not set -# CONFIG_MTD_HYDROGEN3 is not set # CONFIG_MTD_MIRAGE is not set # CONFIG_MTD_CSTM_MIPS_IXX is not set # CONFIG_MTD_OCELOT is not set @@ -214,7 +212,6 @@ # # Disk-On-Chip Device Drivers # -# CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOCPROBE is not set @@ -304,11 +301,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -604,7 +596,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set # CONFIG_UNIX98_PTYS is not set # diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-hydrogen3 linux-2.4.32-rc1.mips/arch/mips/defconfig-hydrogen3 --- linux-2.4.32-rc1/arch/mips/defconfig-hydrogen3 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-hydrogen3 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -CONFIG_MIPS_HYDROGEN3=y # CONFIG_MIPS_PB1550 is not set +CONFIG_MIPS_HYDROGEN3=y # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -214,9 +214,7 @@ # CONFIG_MTD_BOSPORUS is not set # CONFIG_MTD_XXS1500 is not set # CONFIG_MTD_MTX1 is not set -# CONFIG_MTD_DB1X00 is not set # CONFIG_MTD_PB1550 is not set -CONFIG_MTD_HYDROGEN3=y # CONFIG_MTD_MIRAGE is not set # CONFIG_MTD_CSTM_MIPS_IXX is not set # CONFIG_MTD_OCELOT is not set @@ -235,7 +233,6 @@ # # Disk-On-Chip Device Drivers # -# CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOCPROBE is not set @@ -340,11 +337,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -590,7 +582,6 @@ # CONFIG_AU1X00_USB_TTY is not set # CONFIG_AU1X00_USB_RAW is not set # CONFIG_TXX927_SERIAL is not set -CONFIG_MIPS_HYDROGEN3_BUTTONS=y CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 @@ -838,6 +829,7 @@ # CONFIG_FB_PM2 is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CYBER2000 is not set +CONFIG_FB_AU1100=y # CONFIG_FB_MATROX is not set # CONFIG_FB_ATY is not set # CONFIG_FB_RADEON is not set @@ -849,7 +841,6 @@ # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_E1356 is not set -CONFIG_FB_AU1100=y # CONFIG_FB_IT8181 is not set # CONFIG_FB_VIRTUAL is not set CONFIG_FBCON_ADVANCED=y diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-ip22 linux-2.4.32-rc1.mips/arch/mips/defconfig-ip22 --- linux-2.4.32-rc1/arch/mips/defconfig-ip22 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-ip22 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -235,11 +235,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -319,9 +314,11 @@ # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set @@ -465,7 +462,6 @@ # CONFIG_SERIAL is not set # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-it8172 linux-2.4.32-rc1.mips/arch/mips/defconfig-it8172 --- linux-2.4.32-rc1/arch/mips/defconfig-it8172 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-it8172 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -186,8 +186,8 @@ # Mapping drivers for chip access # CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=8000000 -CONFIG_MTD_PHYSMAP_LEN=2000000 +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0x2000000 CONFIG_MTD_PHYSMAP_BUSWIDTH=4 # CONFIG_MTD_PB1000 is not set # CONFIG_MTD_PB1500 is not set @@ -195,9 +195,7 @@ # CONFIG_MTD_BOSPORUS is not set # CONFIG_MTD_XXS1500 is not set # CONFIG_MTD_MTX1 is not set -# CONFIG_MTD_DB1X00 is not set # CONFIG_MTD_PB1550 is not set -# CONFIG_MTD_HYDROGEN3 is not set # CONFIG_MTD_MIRAGE is not set # CONFIG_MTD_CSTM_MIPS_IXX is not set # CONFIG_MTD_OCELOT is not set @@ -216,7 +214,6 @@ # # Disk-On-Chip Device Drivers # -# CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOCPROBE is not set @@ -304,11 +301,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -592,7 +584,6 @@ CONFIG_PC_KEYB=y # CONFIG_IT8172_SCR0 is not set # CONFIG_IT8172_SCR1 is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-ivr linux-2.4.32-rc1.mips/arch/mips/defconfig-ivr --- linux-2.4.32-rc1/arch/mips/defconfig-ivr 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-ivr 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -226,11 +226,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -516,7 +511,6 @@ CONFIG_QTRONIX_KEYBOARD=y CONFIG_IT8172_CIR=y # CONFIG_IT8172_SCR0 is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-jmr3927 linux-2.4.32-rc1.mips/arch/mips/defconfig-jmr3927 --- linux-2.4.32-rc1/arch/mips/defconfig-jmr3927 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-jmr3927 2005-03-18 13:13:21.000000000 +0100 @@ -28,8 +28,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -225,11 +225,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -454,7 +449,6 @@ # CONFIG_SERIAL_TXX9_CONSOLE is not set CONFIG_TXX927_SERIAL=y CONFIG_TXX927_SERIAL_CONSOLE=y -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set # CONFIG_UNIX98_PTYS is not set # diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-lasat linux-2.4.32-rc1.mips/arch/mips/defconfig-lasat --- linux-2.4.32-rc1/arch/mips/defconfig-lasat 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-lasat 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -198,9 +198,7 @@ # CONFIG_MTD_BOSPORUS is not set # CONFIG_MTD_XXS1500 is not set # CONFIG_MTD_MTX1 is not set -# CONFIG_MTD_DB1X00 is not set # CONFIG_MTD_PB1550 is not set -# CONFIG_MTD_HYDROGEN3 is not set # CONFIG_MTD_MIRAGE is not set # CONFIG_MTD_CSTM_MIPS_IXX is not set # CONFIG_MTD_OCELOT is not set @@ -219,7 +217,6 @@ # # Disk-On-Chip Device Drivers # -# CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOCPROBE is not set @@ -303,11 +300,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -584,7 +576,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-malta linux-2.4.32-rc1.mips/arch/mips/defconfig-malta --- linux-2.4.32-rc1/arch/mips/defconfig-malta 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-malta 2005-04-19 14:19:34.000000000 +0200 @@ -22,16 +22,19 @@ # # CONFIG_ACER_PICA_61 is not set # CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_FICMMP is not set # CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_DB1000 is not set # CONFIG_MIPS_DB1100 is not set # CONFIG_MIPS_DB1500 is not set # CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_PB1200 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -237,11 +240,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -273,8 +271,83 @@ # # ATA/IDE/MFM/RLL support # -# CONFIG_IDE is not set +CONFIG_IDE=y + +# +# IDE, ATA and ATAPI Block devices +# +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_IDEDISK_STROKE is not set +# CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_DELKIN is not set +CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDETAPE=y +CONFIG_BLK_DEV_IDEFLOPPY=y +CONFIG_BLK_DEV_IDESCSI=y +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_CMD640 is not set +# CONFIG_BLK_DEV_CMD640_ENHANCED is not set +# CONFIG_BLK_DEV_ISAPNP is not set +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_IDEPCI_SHARE_IRQ=y +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_IDEDMA_FORCED=y +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_PCI_WIP is not set +# CONFIG_BLK_DEV_ADMA100 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_WDC_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_AMD74XX_OVERRIDE is not set +# CONFIG_BLK_DEV_ATIIXP is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_HPT34X_AUTODMA is not set +# CONFIG_BLK_DEV_HPT366 is not set +CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_PDC202XX_BURST is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_RZ1000 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SIS5513 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_CHIPSETS is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_DMA_NONPCI is not set +# CONFIG_BLK_DEV_ATARAID is not set +# CONFIG_BLK_DEV_ATARAID_PDC is not set +# CONFIG_BLK_DEV_ATARAID_HPT is not set +# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set +# CONFIG_BLK_DEV_ATARAID_SII is not set # # SCSI support @@ -319,9 +392,11 @@ # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set @@ -524,7 +599,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-mirage linux-2.4.32-rc1.mips/arch/mips/defconfig-mirage --- linux-2.4.32-rc1/arch/mips/defconfig-mirage 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-mirage 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -209,9 +209,7 @@ # CONFIG_MTD_BOSPORUS is not set # CONFIG_MTD_XXS1500 is not set # CONFIG_MTD_MTX1 is not set -# CONFIG_MTD_DB1X00 is not set # CONFIG_MTD_PB1550 is not set -# CONFIG_MTD_HYDROGEN3 is not set CONFIG_MTD_MIRAGE=y # CONFIG_MTD_CSTM_MIPS_IXX is not set # CONFIG_MTD_OCELOT is not set @@ -230,7 +228,6 @@ # # Disk-On-Chip Device Drivers # -# CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOCPROBE is not set @@ -335,11 +332,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -560,7 +552,6 @@ # CONFIG_AU1X00_USB_TTY is not set # CONFIG_AU1X00_USB_RAW is not set # CONFIG_TXX927_SERIAL is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-mpc30x linux-2.4.32-rc1.mips/arch/mips/defconfig-mpc30x --- linux-2.4.32-rc1/arch/mips/defconfig-mpc30x 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-mpc30x 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -228,11 +228,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -400,7 +395,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set # CONFIG_VR41XX_KIU is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-mtx-1 linux-2.4.32-rc1.mips/arch/mips/defconfig-mtx-1 --- linux-2.4.32-rc1/arch/mips/defconfig-mtx-1 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-mtx-1 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set CONFIG_MIPS_MTX1=y # CONFIG_COGENT_CSB250 is not set @@ -193,9 +193,7 @@ # CONFIG_MTD_BOSPORUS is not set # CONFIG_MTD_XXS1500 is not set CONFIG_MTD_MTX1=y -# CONFIG_MTD_DB1X00 is not set # CONFIG_MTD_PB1550 is not set -# CONFIG_MTD_HYDROGEN3 is not set # CONFIG_MTD_MIRAGE is not set # CONFIG_MTD_CSTM_MIPS_IXX is not set # CONFIG_MTD_OCELOT is not set @@ -214,7 +212,6 @@ # # Disk-On-Chip Device Drivers # -# CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOCPROBE is not set @@ -371,11 +368,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set CONFIG_BRIDGE=m # CONFIG_X25 is not set @@ -479,9 +471,11 @@ # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set @@ -700,7 +694,6 @@ # CONFIG_AU1X00_USB_TTY is not set # CONFIG_AU1X00_USB_RAW is not set # CONFIG_TXX927_SERIAL is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-nino linux-2.4.32-rc1.mips/arch/mips/defconfig-nino --- linux-2.4.32-rc1/arch/mips/defconfig-nino 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-nino 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -226,11 +226,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -339,7 +334,6 @@ # CONFIG_SERIAL_TXX9 is not set # CONFIG_SERIAL_TXX9_CONSOLE is not set # CONFIG_TXX927_SERIAL is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set # CONFIG_UNIX98_PTYS is not set # diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-ocelot linux-2.4.32-rc1.mips/arch/mips/defconfig-ocelot --- linux-2.4.32-rc1/arch/mips/defconfig-ocelot 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-ocelot 2005-03-18 13:13:21.000000000 +0100 @@ -28,8 +28,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -194,9 +194,7 @@ # CONFIG_MTD_BOSPORUS is not set # CONFIG_MTD_XXS1500 is not set # CONFIG_MTD_MTX1 is not set -# CONFIG_MTD_DB1X00 is not set # CONFIG_MTD_PB1550 is not set -# CONFIG_MTD_HYDROGEN3 is not set # CONFIG_MTD_MIRAGE is not set # CONFIG_MTD_CSTM_MIPS_IXX is not set CONFIG_MTD_OCELOT=y @@ -215,7 +213,6 @@ # # Disk-On-Chip Device Drivers # -# CONFIG_MTD_DOC1000 is not set CONFIG_MTD_DOC2000=y # CONFIG_MTD_DOC2001 is not set CONFIG_MTD_DOCPROBE=y @@ -307,11 +304,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -513,7 +505,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-osprey linux-2.4.32-rc1.mips/arch/mips/defconfig-osprey --- linux-2.4.32-rc1/arch/mips/defconfig-osprey 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-osprey 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -227,11 +227,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -388,7 +383,6 @@ # CONFIG_SERIAL_MULTIPORT is not set # CONFIG_HUB6 is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set # CONFIG_VR41XX_KIU is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-pb1000 linux-2.4.32-rc1.mips/arch/mips/defconfig-pb1000 --- linux-2.4.32-rc1/arch/mips/defconfig-pb1000 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-pb1000 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ CONFIG_MIPS_PB1000=y # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -215,9 +215,7 @@ # CONFIG_MTD_BOSPORUS is not set # CONFIG_MTD_XXS1500 is not set # CONFIG_MTD_MTX1 is not set -# CONFIG_MTD_DB1X00 is not set # CONFIG_MTD_PB1550 is not set -# CONFIG_MTD_HYDROGEN3 is not set # CONFIG_MTD_MIRAGE is not set # CONFIG_MTD_CSTM_MIPS_IXX is not set # CONFIG_MTD_OCELOT is not set @@ -236,7 +234,6 @@ # # Disk-On-Chip Device Drivers # -# CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOCPROBE is not set @@ -324,11 +321,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -622,7 +614,6 @@ # CONFIG_AU1X00_USB_TTY is not set # CONFIG_AU1X00_USB_RAW is not set # CONFIG_TXX927_SERIAL is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 @@ -707,7 +698,7 @@ # # CONFIG_PCMCIA_SERIAL_CS is not set # CONFIG_SYNCLINK_CS is not set -CONFIG_AU1X00_GPIO=m +CONFIG_AU1X00_GPIO=y # CONFIG_TS_AU1X00_ADS7846 is not set # diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-pb1100 linux-2.4.32-rc1.mips/arch/mips/defconfig-pb1100 --- linux-2.4.32-rc1/arch/mips/defconfig-pb1100 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-pb1100 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set CONFIG_MIPS_PB1100=y # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -198,9 +198,7 @@ # CONFIG_MTD_MTX1 is not set CONFIG_MTD_PB1500_BOOT=y CONFIG_MTD_PB1500_USER=y -# CONFIG_MTD_DB1X00 is not set # CONFIG_MTD_PB1550 is not set -# CONFIG_MTD_HYDROGEN3 is not set # CONFIG_MTD_MIRAGE is not set # CONFIG_MTD_CSTM_MIPS_IXX is not set # CONFIG_MTD_OCELOT is not set @@ -219,7 +217,6 @@ # # Disk-On-Chip Device Drivers # -# CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOCPROBE is not set @@ -324,11 +321,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -613,7 +605,6 @@ # CONFIG_AU1X00_USB_TTY is not set # CONFIG_AU1X00_USB_RAW is not set # CONFIG_TXX927_SERIAL is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 @@ -859,6 +850,7 @@ # CONFIG_FB_PM2 is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CYBER2000 is not set +CONFIG_FB_AU1100=y # CONFIG_FB_MATROX is not set # CONFIG_FB_ATY is not set # CONFIG_FB_RADEON is not set @@ -870,7 +862,6 @@ # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_E1356 is not set -CONFIG_FB_AU1100=y # CONFIG_FB_IT8181 is not set # CONFIG_FB_VIRTUAL is not set CONFIG_FBCON_ADVANCED=y diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-pb1200 linux-2.4.32-rc1.mips/arch/mips/defconfig-pb1200 --- linux-2.4.32-rc1/arch/mips/defconfig-pb1200 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-pb1200 2005-03-18 13:13:21.000000000 +0100 @@ -0,0 +1,1060 @@ +# +# Automatically generated make config: don't edit +# +CONFIG_MIPS=y +CONFIG_MIPS32=y +# CONFIG_MIPS64 is not set + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y + +# +# Loadable module support +# +CONFIG_MODULES=y +# CONFIG_MODVERSIONS is not set +CONFIG_KMOD=y + +# +# Machine selection +# +# CONFIG_ACER_PICA_61 is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set +# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MIPS_MTX1 is not set +# CONFIG_COGENT_CSB250 is not set +# CONFIG_BAGET_MIPS is not set +# CONFIG_CASIO_E55 is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_DECSTATION is not set +# CONFIG_MIPS_EV64120 is not set +# CONFIG_MIPS_EV96100 is not set +# CONFIG_MIPS_IVR is not set +# CONFIG_HP_LASERJET is not set +# CONFIG_IBM_WORKPAD is not set +# CONFIG_LASAT is not set +# CONFIG_MIPS_ITE8172 is not set +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_MAGNUM_4000 is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_MOMENCO_OCELOT_G is not set +# CONFIG_MOMENCO_OCELOT_C is not set +# CONFIG_MOMENCO_JAGUAR_ATX is not set +# CONFIG_PMC_BIG_SUR is not set +# CONFIG_PMC_STRETCH is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_DDB5074 is not set +# CONFIG_DDB5476 is not set +# CONFIG_DDB5477 is not set +# CONFIG_NEC_OSPREY is not set +# CONFIG_NEC_EAGLE is not set +# CONFIG_OLIVETTI_M700 is not set +# CONFIG_NINO is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SIBYTE_SB1xxx_SOC is not set +# CONFIG_SNI_RM200_PCI is not set +# CONFIG_TANBAC_TB0226 is not set +# CONFIG_TANBAC_TB0229 is not set +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +# CONFIG_VICTOR_MPC30X is not set +# CONFIG_ZAO_CAPCELLA is not set +# CONFIG_HIGHMEM is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_SOC_AU1X00=y +CONFIG_SOC_AU1200=y +CONFIG_NONCOHERENT_IO=y +CONFIG_PC_KEYB=y +# CONFIG_MIPS_AU1000 is not set + +# +# CPU selection +# +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS64 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +# CONFIG_VTAG_ICACHE is not set +CONFIG_64BIT_PHYS_ADDR=y +# CONFIG_CPU_ADVANCED is not set +CONFIG_CPU_HAS_LLSC=y +# CONFIG_CPU_HAS_LLDSCD is not set +# CONFIG_CPU_HAS_WB is not set +CONFIG_CPU_HAS_SYNC=y + +# +# General setup +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_BUILD_ELF64 is not set +CONFIG_NET=y +CONFIG_PCI=y +CONFIG_PCI_NEW=y +CONFIG_PCI_AUTO=y +# CONFIG_PCI_NAMES is not set +# CONFIG_ISA is not set +# CONFIG_TC is not set +# CONFIG_MCA is not set +# CONFIG_SBUS is not set +CONFIG_HOTPLUG=y + +# +# PCMCIA/CardBus support +# +CONFIG_PCMCIA=m +# CONFIG_CARDBUS is not set +# CONFIG_TCIC is not set +# CONFIG_I82092 is not set +# CONFIG_I82365 is not set +CONFIG_PCMCIA_AU1X00=m + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HOTPLUG_PCI_COMPAQ is not set +# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set +# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set +# CONFIG_HOTPLUG_PCI_PCIE is not set +# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set +CONFIG_SYSVIPC=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +CONFIG_KCORE_ELF=y +# CONFIG_KCORE_AOUT is not set +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_MIPS32_COMPAT is not set +# CONFIG_MIPS32_O32 is not set +# CONFIG_MIPS32_N32 is not set +# CONFIG_BINFMT_ELF32 is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_OOM_KILLER is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="mem=96M" +# CONFIG_PM is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play configuration +# +# CONFIG_PNP is not set +# CONFIG_ISAPNP is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_XD is not set +# CONFIG_PARIDE is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_CISS_SCSI_TAPE is not set +# CONFIG_CISS_MONITOR_THREAD is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_BLK_STATS is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set +# CONFIG_BLK_DEV_MD is not set +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_RAID0 is not set +# CONFIG_MD_RAID1 is not set +# CONFIG_MD_RAID5 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_BLK_DEV_LVM is not set + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +# CONFIG_NETLINK_DEV is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_FILTER=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_INET_ECN is not set +# CONFIG_SYN_COOKIES is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_IP_NF_CONNTRACK is not set +# CONFIG_IP_NF_QUEUE is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_NF_COMPAT_IPCHAINS is not set +# CONFIG_IP_NF_COMPAT_IPFWADM is not set + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_KHTTPD is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_VLAN_8021Q is not set + +# +# +# +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_DECNET is not set +# CONFIG_BRIDGE is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_LLC is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_FASTROUTE is not set +# CONFIG_NET_HW_FLOWCONTROL is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set +# CONFIG_PHONE_IXJ is not set +# CONFIG_PHONE_IXJ_PCMCIA is not set + +# +# ATA/IDE/MFM/RLL support +# +CONFIG_IDE=y + +# +# IDE, ATA and ATAPI Block devices +# +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_HD_IDE is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_IDEDISK_STROKE=y +CONFIG_BLK_DEV_IDECS=m +# CONFIG_BLK_DEV_DELKIN is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_CMD640 is not set +# CONFIG_BLK_DEV_CMD640_ENHANCED is not set +# CONFIG_BLK_DEV_ISAPNP is not set +# CONFIG_BLK_DEV_IDEPCI is not set +# CONFIG_IDE_CHIPSETS is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_DMA_NONPCI is not set +# CONFIG_BLK_DEV_ATARAID is not set +# CONFIG_BLK_DEV_ATARAID_PDC is not set +# CONFIG_BLK_DEV_ATARAID_HPT is not set +# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set +# CONFIG_BLK_DEV_ATARAID_SII is not set + +# +# SCSI support +# +CONFIG_SCSI=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_SD_EXTRA_DEVS=40 +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_SR_EXTRA_DEVS=2 +# CONFIG_CHR_DEV_SG is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_DEBUG_QUEUES is not set +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_7000FASST is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AHA1542 is not set +# CONFIG_SCSI_AHA1740 is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_SCSI_AM53C974 is not set +# CONFIG_SCSI_MEGARAID is not set +# CONFIG_SCSI_MEGARAID2 is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_SATA_AHCI is not set +# CONFIG_SCSI_SATA_SVW is not set +# CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_SX4 is not set +# CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIS is not set +# CONFIG_SCSI_SATA_ULI is not set +# CONFIG_SCSI_SATA_VIA is not set +# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_CPQFCTS is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_EATA_DMA is not set +# CONFIG_SCSI_EATA_PIO is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_NCR53C7xx is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_NCR53C8XX is not set +# CONFIG_SCSI_SYM53C8XX is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PCI2000 is not set +# CONFIG_SCSI_PCI2220I is not set +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_QLOGIC_ISP is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_SIM710 is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_U14_34F is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_SCSI_PCMCIA is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_BOOT is not set +# CONFIG_FUSION_ISENSE is not set +# CONFIG_FUSION_CTL is not set +# CONFIG_FUSION_LAN is not set + +# +# IEEE 1394 (FireWire) support (EXPERIMENTAL) +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set +# CONFIG_I2O_PCI is not set +# CONFIG_I2O_BLOCK is not set +# CONFIG_I2O_LAN is not set +# CONFIG_I2O_SCSI is not set +# CONFIG_I2O_PROC is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_ETHERTAP is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_MIPS_AU1X00_ENET is not set +# CONFIG_SUNLANCE is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNBMAC is not set +# CONFIG_SUNQE is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_LANCE is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +# CONFIG_NET_PCI is not set +# CONFIG_NET_POCKET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_MYRI_SBUS is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PLIP is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +# CONFIG_PPP_BSDCOMP is not set +CONFIG_PPPOE=m +# CONFIG_SLIP is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set +# CONFIG_NET_FC is not set +# CONFIG_RCPCI is not set +# CONFIG_SHAPER is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set + +# +# PCMCIA network device support +# +# CONFIG_NET_PCMCIA is not set + +# +# Amateur Radio support +# +# CONFIG_HAMRADIO is not set + +# +# IrDA (infrared) support +# +# CONFIG_IRDA is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input core support +# +CONFIG_INPUT=y +CONFIG_INPUT_KEYBDEV=y +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_UINPUT is not set + +# +# Character devices +# +CONFIG_VT=y +# CONFIG_VT_CONSOLE is not set +# CONFIG_SERIAL is not set +# CONFIG_SERIAL_EXTENDED is not set +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_DIGI is not set +# CONFIG_ESPSERIAL is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set +# CONFIG_SERIAL_TX3912 is not set +# CONFIG_SERIAL_TX3912_CONSOLE is not set +# CONFIG_SERIAL_TXX9 is not set +# CONFIG_SERIAL_TXX9_CONSOLE is not set +CONFIG_AU1X00_UART=y +CONFIG_AU1X00_SERIAL_CONSOLE=y +# CONFIG_AU1X00_USB_TTY is not set +# CONFIG_AU1X00_USB_RAW is not set +# CONFIG_TXX927_SERIAL is not set +CONFIG_UNIX98_PTYS=y +CONFIG_UNIX98_PTY_COUNT=256 + +# +# I2C support +# +CONFIG_I2C=y +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_PROC=y + +# +# Mice +# +# CONFIG_BUSMOUSE is not set +# CONFIG_MOUSE is not set + +# +# Joysticks +# +# CONFIG_INPUT_GAMEPORT is not set +# CONFIG_INPUT_NS558 is not set +# CONFIG_INPUT_LIGHTNING is not set +# CONFIG_INPUT_PCIGAME is not set +# CONFIG_INPUT_CS461X is not set +# CONFIG_INPUT_EMU10K1 is not set +# CONFIG_INPUT_SERIO is not set +# CONFIG_INPUT_SERPORT is not set + +# +# Joysticks +# +# CONFIG_INPUT_ANALOG is not set +# CONFIG_INPUT_A3D is not set +# CONFIG_INPUT_ADI is not set +# CONFIG_INPUT_COBRA is not set +# CONFIG_INPUT_GF2K is not set +# CONFIG_INPUT_GRIP is not set +# CONFIG_INPUT_INTERACT is not set +# CONFIG_INPUT_TMDC is not set +# CONFIG_INPUT_SIDEWINDER is not set +# CONFIG_INPUT_IFORCE_USB is not set +# CONFIG_INPUT_IFORCE_232 is not set +# CONFIG_INPUT_WARRIOR is not set +# CONFIG_INPUT_MAGELLAN is not set +# CONFIG_INPUT_SPACEORB is not set +# CONFIG_INPUT_SPACEBALL is not set +# CONFIG_INPUT_STINGER is not set +# CONFIG_INPUT_DB9 is not set +# CONFIG_INPUT_GAMECON is not set +# CONFIG_INPUT_TURBOGRAFX is not set +# CONFIG_QIC02_TAPE is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_IPMI_PANIC_EVENT is not set +# CONFIG_IPMI_DEVICE_INTERFACE is not set +# CONFIG_IPMI_KCS is not set +# CONFIG_IPMI_WATCHDOG is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_SCx200 is not set +# CONFIG_SCx200_GPIO is not set +# CONFIG_AMD_PM768 is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_FTAPE is not set +# CONFIG_AGP is not set + +# +# Direct Rendering Manager (XFree86 DRI support) +# +# CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_PCMCIA_SERIAL_CS is not set +# CONFIG_SYNCLINK_CS is not set +# CONFIG_AU1X00_GPIO is not set +# CONFIG_TS_AU1X00_ADS7846 is not set + +# +# File systems +# +# CONFIG_QUOTA is not set +# CONFIG_QFMT_V2 is not set +CONFIG_AUTOFS_FS=y +# CONFIG_AUTOFS4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_ADFS_FS is not set +# CONFIG_ADFS_FS_RW is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BEFS_DEBUG is not set +# CONFIG_BFS_FS is not set +CONFIG_EXT3_FS=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +# CONFIG_UMSDOS_FS is not set +CONFIG_VFAT_FS=y +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +CONFIG_TMPFS=y +CONFIG_RAMFS=y +# CONFIG_ISO9660_FS is not set +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set +# CONFIG_JFS_FS is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_NTFS_FS is not set +# CONFIG_NTFS_RW is not set +# CONFIG_HPFS_FS is not set +CONFIG_PROC_FS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVFS_MOUNT is not set +# CONFIG_DEVFS_DEBUG is not set +CONFIG_DEVPTS_FS=y +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX4FS_RW is not set +# CONFIG_ROMFS_FS is not set +CONFIG_EXT2_FS=y +# CONFIG_SYSV_FS is not set +# CONFIG_UDF_FS is not set +# CONFIG_UDF_RW is not set +# CONFIG_UFS_FS is not set +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_XFS_FS is not set +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_TRACE is not set +# CONFIG_XFS_DEBUG is not set + +# +# Network File Systems +# +# CONFIG_CODA_FS is not set +# CONFIG_INTERMEZZO_FS is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +# CONFIG_NFSD_V3 is not set +# CONFIG_NFSD_TCP is not set +CONFIG_SUNRPC=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +# CONFIG_SMB_FS is not set +# CONFIG_NCP_FS is not set +# CONFIG_NCPFS_PACKET_SIGNING is not set +# CONFIG_NCPFS_IOCTL_LOCKING is not set +# CONFIG_NCPFS_STRONG is not set +# CONFIG_NCPFS_NFS_NS is not set +# CONFIG_NCPFS_OS2_NS is not set +# CONFIG_NCPFS_SMALLDOS is not set +# CONFIG_NCPFS_NLS is not set +# CONFIG_NCPFS_EXTRAS is not set +# CONFIG_ZISOFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_SMB_NLS is not set +CONFIG_NLS=y + +# +# Native Language Support +# +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Console drivers +# +# CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set + +# +# Frame-buffer support +# +CONFIG_FB=y +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FB_RIVA is not set +# CONFIG_FB_CLGEN is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_INTEL is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_E1356 is not set +# CONFIG_FB_IT8181 is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_FBCON_ADVANCED=y +# CONFIG_FBCON_MFB is not set +# CONFIG_FBCON_CFB2 is not set +# CONFIG_FBCON_CFB4 is not set +# CONFIG_FBCON_CFB8 is not set +CONFIG_FBCON_CFB16=y +# CONFIG_FBCON_CFB24 is not set +CONFIG_FBCON_CFB32=y +# CONFIG_FBCON_AFB is not set +# CONFIG_FBCON_ILBM is not set +# CONFIG_FBCON_IPLAN2P2 is not set +# CONFIG_FBCON_IPLAN2P4 is not set +# CONFIG_FBCON_IPLAN2P8 is not set +# CONFIG_FBCON_MAC is not set +# CONFIG_FBCON_VGA_PLANES is not set +# CONFIG_FBCON_VGA is not set +# CONFIG_FBCON_HGA is not set +# CONFIG_FBCON_FONTWIDTH8_ONLY is not set +CONFIG_FBCON_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set + +# +# Sound +# +CONFIG_SOUND=y +# CONFIG_SOUND_ALI5455 is not set +# CONFIG_SOUND_BT878 is not set +# CONFIG_SOUND_CMPCI is not set +# CONFIG_SOUND_EMU10K1 is not set +# CONFIG_MIDI_EMU10K1 is not set +# CONFIG_SOUND_FUSION is not set +# CONFIG_SOUND_CS4281 is not set +# CONFIG_SOUND_ES1370 is not set +# CONFIG_SOUND_ES1371 is not set +# CONFIG_SOUND_ESSSOLO1 is not set +# CONFIG_SOUND_MAESTRO is not set +# CONFIG_SOUND_MAESTRO3 is not set +# CONFIG_SOUND_FORTE is not set +# CONFIG_SOUND_ICH is not set +# CONFIG_SOUND_RME96XX is not set +# CONFIG_SOUND_SONICVIBES is not set +# CONFIG_SOUND_AU1X00 is not set +CONFIG_SOUND_AU1550_PSC=y +# CONFIG_SOUND_AU1550_I2S is not set +# CONFIG_SOUND_TRIDENT is not set +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set +# CONFIG_SOUND_VIA82CXXX is not set +# CONFIG_MIDI_VIA82CXXX is not set +# CONFIG_SOUND_OSS is not set +# CONFIG_SOUND_TVMIXER is not set +# CONFIG_SOUND_AD1980 is not set +# CONFIG_SOUND_WM97XX is not set + +# +# USB support +# +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_UHCI is not set +# CONFIG_USB_UHCI_ALT is not set +CONFIG_USB_OHCI=y + +# +# USB Device Class drivers +# +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_BLUETOOTH is not set +# CONFIG_USB_MIDI is not set +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# USB Human Interface Devices (HID) +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +CONFIG_USB_HIDDEV=y +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set + +# +# USB Imaging devices +# +# CONFIG_USB_DC2XX is not set +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_SCANNER is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_HPUSBSCSI is not set + +# +# USB Multimedia devices +# + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network adaptors +# +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_CATC is not set +# CONFIG_USB_CDCETHER is not set +# CONFIG_USB_USBNET is not set + +# +# USB port drivers +# +# CONFIG_USB_USS720 is not set + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_TIGL is not set +# CONFIG_USB_BRLVGER is not set +# CONFIG_USB_LCD is not set + +# +# Support for USB gadgets +# +# CONFIG_USB_GADGET is not set + +# +# Bluetooth support +# +# CONFIG_BLUEZ is not set + +# +# Kernel hacking +# +CONFIG_CROSSCOMPILE=y +# CONFIG_RUNTIME_DEBUG is not set +# CONFIG_KGDB is not set +# CONFIG_GDB_CONSOLE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_MIPS_UNCACHED is not set +CONFIG_LOG_BUF_SHIFT=0 + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +# CONFIG_CRC32 is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +# CONFIG_FW_LOADER is not set diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-pb1500 linux-2.4.32-rc1.mips/arch/mips/defconfig-pb1500 --- linux-2.4.32-rc1/arch/mips/defconfig-pb1500 2005-01-19 15:09:28.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-pb1500 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set CONFIG_MIPS_PB1500=y -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -215,9 +215,7 @@ # CONFIG_MTD_MTX1 is not set CONFIG_MTD_PB1500_BOOT=y # CONFIG_MTD_PB1500_USER is not set -# CONFIG_MTD_DB1X00 is not set # CONFIG_MTD_PB1550 is not set -# CONFIG_MTD_HYDROGEN3 is not set # CONFIG_MTD_MIRAGE is not set # CONFIG_MTD_CSTM_MIPS_IXX is not set # CONFIG_MTD_OCELOT is not set @@ -236,7 +234,6 @@ # # Disk-On-Chip Device Drivers # -# CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOCPROBE is not set @@ -341,11 +338,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -675,7 +667,6 @@ # CONFIG_AU1X00_USB_TTY is not set # CONFIG_AU1X00_USB_RAW is not set # CONFIG_TXX927_SERIAL is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-pb1550 linux-2.4.32-rc1.mips/arch/mips/defconfig-pb1550 --- linux-2.4.32-rc1/arch/mips/defconfig-pb1550 2005-01-19 15:09:29.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-pb1550 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set CONFIG_MIPS_PB1550=y +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -213,11 +213,9 @@ # CONFIG_MTD_BOSPORUS is not set # CONFIG_MTD_XXS1500 is not set # CONFIG_MTD_MTX1 is not set -# CONFIG_MTD_DB1X00 is not set CONFIG_MTD_PB1550=y CONFIG_MTD_PB1550_BOOT=y CONFIG_MTD_PB1550_USER=y -# CONFIG_MTD_HYDROGEN3 is not set # CONFIG_MTD_MIRAGE is not set # CONFIG_MTD_CSTM_MIPS_IXX is not set # CONFIG_MTD_OCELOT is not set @@ -236,7 +234,6 @@ # # Disk-On-Chip Device Drivers # -# CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOCPROBE is not set @@ -343,11 +340,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -633,7 +625,6 @@ # CONFIG_AU1X00_USB_TTY is not set # CONFIG_AU1X00_USB_RAW is not set # CONFIG_TXX927_SERIAL is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-rbtx4927 linux-2.4.32-rc1.mips/arch/mips/defconfig-rbtx4927 --- linux-2.4.32-rc1/arch/mips/defconfig-rbtx4927 2005-01-19 15:09:29.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-rbtx4927 2005-03-18 13:13:21.000000000 +0100 @@ -28,8 +28,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -223,11 +223,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -466,7 +461,6 @@ CONFIG_SERIAL_TXX9=y CONFIG_SERIAL_TXX9_CONSOLE=y # CONFIG_TXX927_SERIAL is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set # CONFIG_UNIX98_PTYS is not set # diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-rm200 linux-2.4.32-rc1.mips/arch/mips/defconfig-rm200 --- linux-2.4.32-rc1/arch/mips/defconfig-rm200 2005-01-19 15:09:29.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-rm200 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -229,11 +229,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -340,7 +335,6 @@ # CONFIG_SERIAL is not set # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-sb1250-swarm linux-2.4.32-rc1.mips/arch/mips/defconfig-sb1250-swarm --- linux-2.4.32-rc1/arch/mips/defconfig-sb1250-swarm 2005-01-19 15:09:29.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-sb1250-swarm 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -90,6 +90,7 @@ # CONFIG_SIBYTE_TBPROF is not set CONFIG_SIBYTE_GENBUS_IDE=y CONFIG_SMP_CAPABLE=y +CONFIG_MIPS_RTC=y # CONFIG_SNI_RM200_PCI is not set # CONFIG_TANBAC_TB0226 is not set # CONFIG_TANBAC_TB0229 is not set @@ -253,11 +254,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -469,7 +465,6 @@ CONFIG_SIBYTE_SB1250_DUART=y CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y CONFIG_SERIAL_CONSOLE=y -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-sead linux-2.4.32-rc1.mips/arch/mips/defconfig-sead --- linux-2.4.32-rc1/arch/mips/defconfig-sead 2005-01-19 15:09:29.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-sead 2005-03-18 13:13:21.000000000 +0100 @@ -28,8 +28,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -244,7 +244,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set # CONFIG_UNIX98_PTYS is not set # diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-stretch linux-2.4.32-rc1.mips/arch/mips/defconfig-stretch --- linux-2.4.32-rc1/arch/mips/defconfig-stretch 2005-01-19 15:09:29.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-stretch 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -240,11 +240,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -324,9 +319,11 @@ # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set @@ -516,7 +513,6 @@ # CONFIG_SERIAL_TXX9 is not set # CONFIG_SERIAL_TXX9_CONSOLE is not set # CONFIG_TXX927_SERIAL is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-tb0226 linux-2.4.32-rc1.mips/arch/mips/defconfig-tb0226 --- linux-2.4.32-rc1/arch/mips/defconfig-tb0226 2005-01-19 15:09:29.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-tb0226 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -228,11 +228,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -312,9 +307,11 @@ # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set @@ -518,7 +515,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set # CONFIG_VR41XX_KIU is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-tb0229 linux-2.4.32-rc1.mips/arch/mips/defconfig-tb0229 --- linux-2.4.32-rc1/arch/mips/defconfig-tb0229 2005-01-19 15:09:29.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-tb0229 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -230,11 +230,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -445,7 +440,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set # CONFIG_VR41XX_KIU is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-ti1500 linux-2.4.32-rc1.mips/arch/mips/defconfig-ti1500 --- linux-2.4.32-rc1/arch/mips/defconfig-ti1500 2005-01-19 15:09:29.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-ti1500 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set CONFIG_MIPS_XXS1500=y # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -213,9 +213,7 @@ # CONFIG_MTD_BOSPORUS is not set CONFIG_MTD_XXS1500=y # CONFIG_MTD_MTX1 is not set -# CONFIG_MTD_DB1X00 is not set # CONFIG_MTD_PB1550 is not set -# CONFIG_MTD_HYDROGEN3 is not set # CONFIG_MTD_MIRAGE is not set # CONFIG_MTD_CSTM_MIPS_IXX is not set # CONFIG_MTD_OCELOT is not set @@ -234,7 +232,6 @@ # # Disk-On-Chip Device Drivers # -# CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOCPROBE is not set @@ -339,11 +336,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -600,7 +592,6 @@ # CONFIG_AU1X00_USB_TTY is not set # CONFIG_AU1X00_USB_RAW is not set # CONFIG_TXX927_SERIAL is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-workpad linux-2.4.32-rc1.mips/arch/mips/defconfig-workpad --- linux-2.4.32-rc1/arch/mips/defconfig-workpad 2005-01-19 15:09:29.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-workpad 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -222,11 +222,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -426,7 +421,6 @@ # CONFIG_SERIAL_MULTIPORT is not set # CONFIG_HUB6 is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set # CONFIG_VR41XX_KIU is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-xxs1500 linux-2.4.32-rc1.mips/arch/mips/defconfig-xxs1500 --- linux-2.4.32-rc1/arch/mips/defconfig-xxs1500 2005-01-19 15:09:29.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-xxs1500 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set CONFIG_MIPS_XXS1500=y # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -213,9 +213,7 @@ # CONFIG_MTD_BOSPORUS is not set CONFIG_MTD_XXS1500=y # CONFIG_MTD_MTX1 is not set -# CONFIG_MTD_DB1X00 is not set # CONFIG_MTD_PB1550 is not set -# CONFIG_MTD_HYDROGEN3 is not set # CONFIG_MTD_MIRAGE is not set # CONFIG_MTD_CSTM_MIPS_IXX is not set # CONFIG_MTD_OCELOT is not set @@ -234,7 +232,6 @@ # # Disk-On-Chip Device Drivers # -# CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOCPROBE is not set @@ -339,11 +336,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -671,7 +663,6 @@ # CONFIG_AU1X00_USB_TTY is not set # CONFIG_AU1X00_USB_RAW is not set # CONFIG_TXX927_SERIAL is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/defconfig-yosemite linux-2.4.32-rc1.mips/arch/mips/defconfig-yosemite --- linux-2.4.32-rc1/arch/mips/defconfig-yosemite 2005-01-19 15:09:29.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/defconfig-yosemite 2005-03-18 13:13:21.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -227,11 +227,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -310,9 +305,11 @@ # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set @@ -477,7 +474,6 @@ # CONFIG_SERIAL_TXX9 is not set # CONFIG_SERIAL_TXX9_CONSOLE is not set # CONFIG_TXX927_SERIAL is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips/kernel/cpu-probe.c linux-2.4.32-rc1.mips/arch/mips/kernel/cpu-probe.c --- linux-2.4.32-rc1/arch/mips/kernel/cpu-probe.c 2005-01-19 15:09:29.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/kernel/cpu-probe.c 2005-05-25 15:33:22.000000000 +0200 @@ -34,21 +34,16 @@ ".set\tmips0"); } -/* The Au1xxx wait is available only if we run CONFIG_PM and - * the timer setup found we had a 32KHz counter available. - * There are still problems with functions that may call au1k_wait - * directly, but that will be discovered pretty quickly. - */ -extern void (*au1k_wait_ptr)(void); -void au1k_wait(void) +/* The Au1xxx wait is available only if using 32khz counter or + * external timer source, but specifically not CP0 Counter. */ +int allow_au1k_wait; + +static void au1k_wait(void) { -#ifdef CONFIG_PM - unsigned long addr; /* using the wait instruction makes CP0 counter unusable */ - __asm__("la %0,au1k_wait\n\t" - ".set mips3\n\t" - "cache 0x14,0(%0)\n\t" - "cache 0x14,32(%0)\n\t" + __asm__(".set mips3\n\t" + "cache 0x14, 0(%0)\n\t" + "cache 0x14, 32(%0)\n\t" "sync\n\t" "nop\n\t" "wait\n\t" @@ -57,11 +52,7 @@ "nop\n\t" "nop\n\t" ".set mips0\n\t" - : : "r" (addr)); -#else - __asm__("nop\n\t" - "nop"); -#endif + : : "r" (au1k_wait)); } static inline void check_wait(void) @@ -100,20 +91,17 @@ cpu_wait = r4k_wait; printk(" available.\n"); break; -#ifdef CONFIG_PM case CPU_AU1000: case CPU_AU1100: case CPU_AU1500: case CPU_AU1550: - if (au1k_wait_ptr != NULL) { - cpu_wait = au1k_wait_ptr; + case CPU_AU1200: + if (allow_au1k_wait) { + cpu_wait = au1k_wait; printk(" available.\n"); - } - else { + } else printk(" unavailable.\n"); - } break; -#endif default: printk(" unavailable.\n"); break; diff -Nur linux-2.4.32-rc1/arch/mips/kernel/head.S linux-2.4.32-rc1.mips/arch/mips/kernel/head.S --- linux-2.4.32-rc1/arch/mips/kernel/head.S 2005-01-19 15:09:29.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/kernel/head.S 2004-11-22 14:38:23.000000000 +0100 @@ -43,9 +43,9 @@ /* Cache Error */ LEAF(except_vec2_generic) + .set push .set noreorder .set noat - .set mips0 /* * This is a very bad place to be. Our cache error * detection has triggered. If we have write-back data @@ -64,10 +64,9 @@ j cache_parity_error nop + .set pop END(except_vec2_generic) - .set at - /* * Special interrupt vector for embedded MIPS. This is a * dedicated interrupt vector which reduces interrupt processing @@ -76,8 +75,11 @@ * size! */ NESTED(except_vec4, 0, sp) + .set push + .set noreorder 1: j 1b /* Dummy, will be replaced */ nop + .set pop END(except_vec4) /* @@ -87,8 +89,11 @@ * unconditional jump to this vector. */ NESTED(except_vec_ejtag_debug, 0, sp) + .set push + .set noreorder j ejtag_debug_handler nop + .set pop END(except_vec_ejtag_debug) __FINIT @@ -97,6 +102,7 @@ * EJTAG debug exception handler. */ NESTED(ejtag_debug_handler, PT_SIZE, sp) + .set push .set noat .set noreorder mtc0 k0, CP0_DESAVE @@ -120,7 +126,7 @@ deret .set mips0 nop - .set at + .set pop END(ejtag_debug_handler) __INIT @@ -132,13 +138,17 @@ * unconditional jump to this vector. */ NESTED(except_vec_nmi, 0, sp) + .set push + .set noreorder j nmi_handler nop + .set pop END(except_vec_nmi) __FINIT NESTED(nmi_handler, PT_SIZE, sp) + .set push .set noat .set noreorder .set mips3 @@ -147,8 +157,7 @@ move a0, sp RESTORE_ALL eret - .set at - .set mips0 + .set pop END(nmi_handler) __INIT @@ -157,7 +166,20 @@ * Kernel entry point */ NESTED(kernel_entry, 16, sp) + .set push + /* + * For the moment disable interrupts and mark the kernel mode. + * A full initialization of the CPU's status register is done + * later in per_cpu_trap_init(). + */ + mfc0 t0, CP0_STATUS + or t0, ST0_CU0|0x1f + xor t0, 0x1f + mtc0 t0, CP0_STATUS + .set noreorder + sll zero,3 # ehb + .set reorder /* * The firmware/bootloader passes argc/argp/envp @@ -170,8 +192,8 @@ la t1, (_end - 4) 1: addiu t0, 4 + sw zero, (t0) bne t0, t1, 1b - sw zero, (t0) /* * Stack for kernel and init, current variable @@ -182,7 +204,7 @@ sw t0, kernelsp jal init_arch - nop + .set pop END(kernel_entry) @@ -193,17 +215,26 @@ * function after setting up the stack and gp registers. */ LEAF(smp_bootstrap) - .set push - .set noreorder - mtc0 zero, CP0_WIRED - CLI + .set push + /* + * For the moment disable interrupts and bootstrap exception + * vectors and mark the kernel mode. A full initialization of + * the CPU's status register is done later in + * per_cpu_trap_init(). + */ mfc0 t0, CP0_STATUS - li t1, ~(ST0_CU1|ST0_CU2|ST0_CU3|ST0_KX|ST0_SX|ST0_UX) - and t0, t1 - or t0, (ST0_CU0); + or t0, ST0_CU0|ST0_BEV|0x1f + xor t0, ST0_BEV|0x1f + mtc0 t0, CP0_STATUS + + .set noreorder + sll zero,3 # ehb + .set reorder + + mtc0 zero, CP0_WIRED + jal start_secondary - mtc0 t0, CP0_STATUS - .set pop + .set pop END(smp_bootstrap) #endif diff -Nur linux-2.4.32-rc1/arch/mips/kernel/process.c linux-2.4.32-rc1.mips/arch/mips/kernel/process.c --- linux-2.4.32-rc1/arch/mips/kernel/process.c 2003-08-25 13:44:40.000000000 +0200 +++ linux-2.4.32-rc1.mips/arch/mips/kernel/process.c 2005-04-14 12:41:44.000000000 +0200 @@ -128,6 +128,26 @@ return 1; } +void dump_regs(elf_greg_t *gp, struct pt_regs *regs) +{ + int i; + + for (i = 0; i < EF_REG0; i++) + gp[i] = 0; + gp[EF_REG0] = 0; + for (i = 1; i <= 31; i++) + gp[EF_REG0 + i] = regs->regs[i]; + gp[EF_REG26] = 0; + gp[EF_REG27] = 0; + gp[EF_LO] = regs->lo; + gp[EF_HI] = regs->hi; + gp[EF_CP0_EPC] = regs->cp0_epc; + gp[EF_CP0_BADVADDR] = regs->cp0_badvaddr; + gp[EF_CP0_STATUS] = regs->cp0_status; + gp[EF_CP0_CAUSE] = regs->cp0_cause; + gp[EF_UNUSED0] = 0; +} + /* * Create a kernel thread */ diff -Nur linux-2.4.32-rc1/arch/mips/kernel/scall_o32.S linux-2.4.32-rc1.mips/arch/mips/kernel/scall_o32.S --- linux-2.4.32-rc1/arch/mips/kernel/scall_o32.S 2005-01-19 15:09:29.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/kernel/scall_o32.S 2005-02-07 22:21:53.000000000 +0100 @@ -121,15 +121,14 @@ trace_a_syscall: SAVE_STATIC - sw t2, PT_R1(sp) + move s0, t2 jal syscall_trace - lw t2, PT_R1(sp) lw a0, PT_R4(sp) # Restore argument registers lw a1, PT_R5(sp) lw a2, PT_R6(sp) lw a3, PT_R7(sp) - jalr t2 + jalr s0 li t0, -EMAXERRNO - 1 # error? sltu t0, t0, v0 diff -Nur linux-2.4.32-rc1/arch/mips/kernel/setup.c linux-2.4.32-rc1.mips/arch/mips/kernel/setup.c --- linux-2.4.32-rc1/arch/mips/kernel/setup.c 2005-01-19 15:09:29.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/kernel/setup.c 2005-01-13 22:15:57.000000000 +0100 @@ -5,7 +5,7 @@ * * Copyright (C) 1995 Linus Torvalds * Copyright (C) 1995 Waldorf Electronics - * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001 Ralf Baechle + * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 01, 05 Ralf Baechle * Copyright (C) 1996 Stoned Elipot * Copyright (C) 2000, 2001, 2002 Maciej W. Rozycki */ @@ -71,6 +71,8 @@ extern struct rtc_ops no_rtc_ops; struct rtc_ops *rtc_ops; +EXPORT_SYMBOL(rtc_ops); + #ifdef CONFIG_PC_KEYB struct kbd_ops *kbd_ops; #endif @@ -132,10 +134,6 @@ */ load_mmu(); - /* Disable coprocessors and set FPU for 16/32 FPR register model */ - clear_c0_status(ST0_CU1|ST0_CU2|ST0_CU3|ST0_KX|ST0_SX|ST0_FR); - set_c0_status(ST0_CU0); - start_kernel(); } diff -Nur linux-2.4.32-rc1/arch/mips/kernel/traps.c linux-2.4.32-rc1.mips/arch/mips/kernel/traps.c --- linux-2.4.32-rc1/arch/mips/kernel/traps.c 2005-01-19 15:09:29.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/kernel/traps.c 2005-04-12 22:25:34.000000000 +0200 @@ -452,9 +452,10 @@ } ll_task = current; + compute_return_epc(regs); + regs->regs[(opcode & RT) >> 16] = value; - compute_return_epc(regs); return; sig: @@ -485,8 +486,8 @@ goto sig; } if (ll_bit == 0 || ll_task != current) { - regs->regs[reg] = 0; compute_return_epc(regs); + regs->regs[reg] = 0; return; } @@ -495,9 +496,9 @@ goto sig; } + compute_return_epc(regs); regs->regs[reg] = 1; - compute_return_epc(regs); return; sig: @@ -887,12 +888,18 @@ void __init per_cpu_trap_init(void) { unsigned int cpu = smp_processor_id(); + unsigned int status_set = ST0_CU0; - /* Some firmware leaves the BEV flag set, clear it. */ - clear_c0_status(ST0_CU3|ST0_CU2|ST0_CU1|ST0_BEV|ST0_KX|ST0_SX|ST0_UX); - + /* + * Disable coprocessors and 64-bit addressing and set FPU for + * the 16/32 FPR register model. Reset the BEV flag that some + * firmware may have left set and the TS bit (for IP27). Set + * XX for ISA IV code to work. + */ if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV) - set_c0_status(ST0_XX); + status_set |= ST0_XX; + change_c0_status(ST0_CU|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX, + status_set); /* * Some MIPS CPUs have a dedicated interrupt vector which reduces the @@ -902,7 +909,7 @@ set_c0_cause(CAUSEF_IV); cpu_data[cpu].asid_cache = ASID_FIRST_VERSION; - write_c0_context(cpu << 23); + TLBMISS_HANDLER_SETUP(); atomic_inc(&init_mm.mm_count); current->active_mm = &init_mm; @@ -918,8 +925,6 @@ extern char except_vec4; unsigned long i; - per_cpu_trap_init(); - /* Copy the generic exception handler code to it's final destination. */ memcpy((void *)(KSEG0 + 0x80), &except_vec1_generic, 0x80); @@ -1020,10 +1025,5 @@ flush_icache_range(KSEG0, KSEG0 + 0x400); - atomic_inc(&init_mm.mm_count); /* XXX UP? */ - current->active_mm = &init_mm; - - /* XXX Must be done for all CPUs */ - current_cpu_data.asid_cache = ASID_FIRST_VERSION; - TLBMISS_HANDLER_SETUP(); + per_cpu_trap_init(); } diff -Nur linux-2.4.32-rc1/arch/mips/lib/rtc-no.c linux-2.4.32-rc1.mips/arch/mips/lib/rtc-no.c --- linux-2.4.32-rc1/arch/mips/lib/rtc-no.c 2004-02-18 14:36:30.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/lib/rtc-no.c 2005-01-13 22:15:57.000000000 +0100 @@ -6,10 +6,9 @@ * Stub RTC routines to keep Linux from crashing on machine which don't * have a RTC chip. * - * Copyright (C) 1998, 2001 by Ralf Baechle + * Copyright (C) 1998, 2001, 2005 by Ralf Baechle */ #include -#include #include static unsigned int shouldnt_happen(void) @@ -29,5 +28,3 @@ .rtc_write_data = (void *) &shouldnt_happen, .rtc_bcd_mode = (void *) &shouldnt_happen }; - -EXPORT_SYMBOL(rtc_ops); diff -Nur linux-2.4.32-rc1/arch/mips/lib/rtc-std.c linux-2.4.32-rc1.mips/arch/mips/lib/rtc-std.c --- linux-2.4.32-rc1/arch/mips/lib/rtc-std.c 2004-02-18 14:36:30.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/lib/rtc-std.c 2005-01-13 22:15:57.000000000 +0100 @@ -5,9 +5,8 @@ * * RTC routines for PC style attached Dallas chip. * - * Copyright (C) 1998, 2001 by Ralf Baechle + * Copyright (C) 1998, 2001, 05 by Ralf Baechle */ -#include #include #include @@ -33,5 +32,3 @@ &std_rtc_write_data, &std_rtc_bcd_mode }; - -EXPORT_SYMBOL(rtc_ops); diff -Nur linux-2.4.32-rc1/arch/mips/Makefile linux-2.4.32-rc1.mips/arch/mips/Makefile --- linux-2.4.32-rc1/arch/mips/Makefile 2005-01-19 15:09:26.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/Makefile 2005-01-30 09:01:26.000000000 +0100 @@ -211,7 +211,7 @@ endif # -# Au1000 (Alchemy Semi PB1000) eval board +# Au1x AMD Alchemy eval boards # ifdef CONFIG_MIPS_PB1000 LIBS += arch/mips/au1000/pb1000/pb1000.o \ @@ -220,9 +220,6 @@ LOADADDR := 0x80100000 endif -# -# Au1100 (Alchemy Semi PB1100) eval board -# ifdef CONFIG_MIPS_PB1100 LIBS += arch/mips/au1000/pb1100/pb1100.o \ arch/mips/au1000/common/au1000.o @@ -230,9 +227,6 @@ LOADADDR += 0x80100000 endif -# -# Au1500 (Alchemy Semi PB1500) eval board -# ifdef CONFIG_MIPS_PB1500 LIBS += arch/mips/au1000/pb1500/pb1500.o \ arch/mips/au1000/common/au1000.o @@ -240,9 +234,6 @@ LOADADDR := 0x80100000 endif -# -# Au1x00 (AMD/Alchemy) eval boards -# ifdef CONFIG_MIPS_DB1000 LIBS += arch/mips/au1000/db1x00/db1x00.o \ arch/mips/au1000/common/au1000.o @@ -313,6 +304,27 @@ LOADADDR += 0x80100000 endif +ifdef CONFIG_MIPS_PB1200 +LIBS += arch/mips/au1000/pb1200/pb1200.o \ + arch/mips/au1000/common/au1000.o +SUBDIRS += arch/mips/au1000/pb1200 arch/mips/au1000/common +LOADADDR += 0x80100000 +endif + +ifdef CONFIG_MIPS_DB1200 +LIBS += arch/mips/au1000/pb1200/pb1200.o \ + arch/mips/au1000/common/au1000.o +SUBDIRS += arch/mips/au1000/pb1200 arch/mips/au1000/common +LOADADDR += 0x80100000 +endif + +ifdef CONFIG_MIPS_FICMMP +LIBS += arch/mips/au1000/ficmmp/ficmmp.o \ + arch/mips/au1000/common/au1000.o +SUBDIRS += arch/mips/au1000/ficmmp arch/mips/au1000/common +LOADADDR += 0x80100000 +endif + # # Cogent CSB250 diff -Nur linux-2.4.32-rc1/arch/mips/mm/cerr-sb1.c linux-2.4.32-rc1.mips/arch/mips/mm/cerr-sb1.c --- linux-2.4.32-rc1/arch/mips/mm/cerr-sb1.c 2004-02-18 14:36:30.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/mm/cerr-sb1.c 2004-12-13 18:37:23.000000000 +0100 @@ -252,14 +252,14 @@ /* Masks to select bits for Hamming parity, mask_72_64[i] for bit[i] */ static const uint64_t mask_72_64[8] = { - 0x0738C808099264FFL, - 0x38C808099264FF07L, - 0xC808099264FF0738L, - 0x08099264FF0738C8L, - 0x099264FF0738C808L, - 0x9264FF0738C80809L, - 0x64FF0738C8080992L, - 0xFF0738C808099264L + 0x0738C808099264FFULL, + 0x38C808099264FF07ULL, + 0xC808099264FF0738ULL, + 0x08099264FF0738C8ULL, + 0x099264FF0738C808ULL, + 0x9264FF0738C80809ULL, + 0x64FF0738C8080992ULL, + 0xFF0738C808099264ULL }; /* Calculate the parity on a range of bits */ @@ -331,9 +331,9 @@ ((lru >> 4) & 0x3), ((lru >> 6) & 0x3)); } - va = (taglo & 0xC0000FFFFFFFE000) | addr; + va = (taglo & 0xC0000FFFFFFFE000ULL) | addr; if ((taglo & (1 << 31)) && (((taglo >> 62) & 0x3) == 3)) - va |= 0x3FFFF00000000000; + va |= 0x3FFFF00000000000ULL; valid = ((taghi >> 29) & 1); if (valid) { tlo_tmp = taglo & 0xfff3ff; @@ -474,7 +474,7 @@ : "r" ((way << 13) | addr)); taglo = ((unsigned long long)taglohi << 32) | taglolo; - pa = (taglo & 0xFFFFFFE000) | addr; + pa = (taglo & 0xFFFFFFE000ULL) | addr; if (way == 0) { lru = (taghi >> 14) & 0xff; prom_printf("[Bank %d Set 0x%02x] LRU > %d %d %d %d > MRU\n", diff -Nur linux-2.4.32-rc1/arch/mips/mm/c-r4k.c linux-2.4.32-rc1.mips/arch/mips/mm/c-r4k.c --- linux-2.4.32-rc1/arch/mips/mm/c-r4k.c 2005-01-19 15:09:29.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/mm/c-r4k.c 2005-02-06 22:55:42.000000000 +0100 @@ -867,9 +867,16 @@ * normally they'd suffer from aliases but magic in the hardware deals * with that for us so we don't need to take care ourselves. */ - if (c->cputype != CPU_R10000 && c->cputype != CPU_R12000) - if (c->dcache.waysize > PAGE_SIZE) - c->dcache.flags |= MIPS_CACHE_ALIASES; + switch (c->cputype) { + case CPU_R10000: + case CPU_R12000: + break; + case CPU_24K: + if (!(read_c0_config7() & (1 << 16))) + default: + if (c->dcache.waysize > PAGE_SIZE) + c->dcache.flags |= MIPS_CACHE_ALIASES; + } switch (c->cputype) { case CPU_20KC: @@ -1069,9 +1076,6 @@ probe_pcache(); setup_scache(); - if (c->dcache.sets * c->dcache.ways > PAGE_SIZE) - c->dcache.flags |= MIPS_CACHE_ALIASES; - r4k_blast_dcache_page_setup(); r4k_blast_dcache_page_indexed_setup(); r4k_blast_dcache_setup(); diff -Nur linux-2.4.32-rc1/arch/mips/mm/tlbex-mips32.S linux-2.4.32-rc1.mips/arch/mips/mm/tlbex-mips32.S --- linux-2.4.32-rc1/arch/mips/mm/tlbex-mips32.S 2004-02-18 14:36:30.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/mm/tlbex-mips32.S 2004-11-29 00:33:15.000000000 +0100 @@ -196,7 +196,7 @@ .set noat; \ SAVE_ALL; \ mfc0 a2, CP0_BADVADDR; \ - STI; \ + KMODE; \ .set at; \ move a0, sp; \ jal do_page_fault; \ diff -Nur linux-2.4.32-rc1/arch/mips/mm/tlbex-r4k.S linux-2.4.32-rc1.mips/arch/mips/mm/tlbex-r4k.S --- linux-2.4.32-rc1/arch/mips/mm/tlbex-r4k.S 2004-02-18 14:36:30.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/mm/tlbex-r4k.S 2005-06-06 16:46:22.000000000 +0200 @@ -184,13 +184,10 @@ P_MTC0 k0, CP0_ENTRYLO0 # load it PTE_SRL k1, k1, 6 # convert to entrylo1 P_MTC0 k1, CP0_ENTRYLO1 # load it - b 1f - rm9000_tlb_hazard + mtc0_tlbw_hazard tlbwr # write random tlb entry -1: - nop - rm9000_tlb_hazard - eret # return from trap + tlbw_eret_hazard + eret END(except_vec0_r4000) /* TLB refill, EXL == 0, R4600 version */ @@ -468,13 +465,9 @@ PTE_PRESENT(k0, k1, nopage_tlbl) PTE_MAKEVALID(k0, k1) PTE_RELOAD(k1, k0) - rm9000_tlb_hazard - nop - b 1f - tlbwi -1: - nop - rm9000_tlb_hazard + mtc0_tlbw_hazard + tlbwi + tlbw_eret_hazard .set mips3 eret .set mips0 @@ -496,13 +489,9 @@ PTE_WRITABLE(k0, k1, nopage_tlbs) PTE_MAKEWRITE(k0, k1) PTE_RELOAD(k1, k0) - rm9000_tlb_hazard - nop - b 1f - tlbwi -1: - nop - rm9000_tlb_hazard + mtc0_tlbw_hazard + tlbwi + tlbw_eret_hazard .set mips3 eret .set mips0 @@ -529,13 +518,9 @@ /* Now reload the entry into the tlb. */ PTE_RELOAD(k1, k0) - rm9000_tlb_hazard - nop - b 1f - tlbwi -1: - rm9000_tlb_hazard - nop + mtc0_tlbw_hazard + tlbwi + tlbw_eret_hazard .set mips3 eret .set mips0 diff -Nur linux-2.4.32-rc1/arch/mips/mm/tlb-r4k.c linux-2.4.32-rc1.mips/arch/mips/mm/tlb-r4k.c --- linux-2.4.32-rc1/arch/mips/mm/tlb-r4k.c 2005-01-19 15:09:29.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips/mm/tlb-r4k.c 2004-11-25 23:18:38.000000000 +0100 @@ -3,17 +3,12 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * r4xx0.c: R4000 processor variant specific MMU/Cache routines. - * * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle ralf@gnu.org - * - * To do: - * - * - this code is a overbloated pig - * - many of the bug workarounds are not efficient at all, but at - * least they are functional ... + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved. */ +#include #include #include #include @@ -25,9 +20,6 @@ #include #include -#undef DEBUG_TLB -#undef DEBUG_TLBUPDATE - extern char except_vec0_nevada, except_vec0_r4000, except_vec0_r4600; /* CP0 hazard avoidance. */ @@ -41,33 +33,23 @@ unsigned long old_ctx; int entry; -#ifdef DEBUG_TLB - printk("[tlball]"); -#endif - local_irq_save(flags); /* Save old context and create impossible VPN2 value */ old_ctx = read_c0_entryhi(); write_c0_entrylo0(0); write_c0_entrylo1(0); - BARRIER; entry = read_c0_wired(); /* Blast 'em all away. */ while (entry < current_cpu_data.tlbsize) { - /* - * Make sure all entries differ. If they're not different - * MIPS32 will take revenge ... - */ write_c0_entryhi(KSEG0 + entry*0x2000); write_c0_index(entry); - BARRIER; + mtc0_tlbw_hazard(); tlb_write_indexed(); - BARRIER; entry++; } - BARRIER; + tlbw_use_hazard(); write_c0_entryhi(old_ctx); local_irq_restore(flags); } @@ -76,12 +58,8 @@ { int cpu = smp_processor_id(); - if (cpu_context(cpu, mm) != 0) { -#ifdef DEBUG_TLB - printk("[tlbmm<%d>]", cpu_context(cpu, mm)); -#endif + if (cpu_context(cpu, mm) != 0) drop_mmu_context(mm,cpu); - } } void local_flush_tlb_range(struct mm_struct *mm, unsigned long start, @@ -93,10 +71,6 @@ unsigned long flags; int size; -#ifdef DEBUG_TLB - printk("[tlbrange<%02x,%08lx,%08lx>]", - cpu_asid(cpu, mm), start, end); -#endif local_irq_save(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; size = (size + 1) >> 1; @@ -112,7 +86,7 @@ write_c0_entryhi(start | newpid); start += (PAGE_SIZE << 1); - BARRIER; + mtc0_tlbw_hazard(); tlb_probe(); BARRIER; idx = read_c0_index(); @@ -122,10 +96,10 @@ continue; /* Make sure all entries differ. */ write_c0_entryhi(KSEG0 + idx*0x2000); - BARRIER; + mtc0_tlbw_hazard(); tlb_write_indexed(); - BARRIER; } + tlbw_use_hazard(); write_c0_entryhi(oldpid); } else { drop_mmu_context(mm, cpu); @@ -138,34 +112,30 @@ { int cpu = smp_processor_id(); - if (!vma || cpu_context(cpu, vma->vm_mm) != 0) { + if (cpu_context(cpu, vma->vm_mm) != 0) { unsigned long flags; - int oldpid, newpid, idx; + unsigned long oldpid, newpid, idx; -#ifdef DEBUG_TLB - printk("[tlbpage<%d,%08lx>]", cpu_context(cpu, vma->vm_mm), - page); -#endif newpid = cpu_asid(cpu, vma->vm_mm); page &= (PAGE_MASK << 1); local_irq_save(flags); oldpid = read_c0_entryhi(); write_c0_entryhi(page | newpid); - BARRIER; + mtc0_tlbw_hazard(); tlb_probe(); BARRIER; idx = read_c0_index(); write_c0_entrylo0(0); write_c0_entrylo1(0); - if(idx < 0) + if (idx < 0) goto finish; /* Make sure all entries differ. */ write_c0_entryhi(KSEG0+idx*0x2000); - BARRIER; + mtc0_tlbw_hazard(); tlb_write_indexed(); + tlbw_use_hazard(); finish: - BARRIER; write_c0_entryhi(oldpid); local_irq_restore(flags); } @@ -185,7 +155,7 @@ local_irq_save(flags); write_c0_entryhi(page); - BARRIER; + mtc0_tlbw_hazard(); tlb_probe(); BARRIER; idx = read_c0_index(); @@ -194,18 +164,19 @@ if (idx >= 0) { /* Make sure all entries differ. */ write_c0_entryhi(KSEG0+idx*0x2000); + mtc0_tlbw_hazard(); tlb_write_indexed(); + tlbw_use_hazard(); } - BARRIER; write_c0_entryhi(oldpid); + local_irq_restore(flags); } EXPORT_SYMBOL(local_flush_tlb_one); -/* We will need multiple versions of update_mmu_cache(), one that just - * updates the TLB with the new pte(s), and another which also checks - * for the R4k "end of page" hardware bug and does the needy. +/* + * Updates the TLB with the new pte(s). */ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) { @@ -223,25 +194,16 @@ pid = read_c0_entryhi() & ASID_MASK; -#ifdef DEBUG_TLB - if ((pid != cpu_asid(cpu, vma->vm_mm)) || - (cpu_context(vma->vm_mm) == 0)) { - printk("update_mmu_cache: Wheee, bogus tlbpid mmpid=%d " - "tlbpid=%d\n", (int) (cpu_asid(cpu, vma->vm_mm)), pid); - } -#endif - local_irq_save(flags); address &= (PAGE_MASK << 1); write_c0_entryhi(address | pid); pgdp = pgd_offset(vma->vm_mm, address); - BARRIER; + mtc0_tlbw_hazard(); tlb_probe(); BARRIER; pmdp = pmd_offset(pgdp, address); idx = read_c0_index(); ptep = pte_offset(pmdp, address); - BARRIER; #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) write_c0_entrylo0(ptep->pte_high); ptep++; @@ -251,15 +213,13 @@ write_c0_entrylo1(pte_val(*ptep) >> 6); #endif write_c0_entryhi(address | pid); - BARRIER; - if (idx < 0) { + mtc0_tlbw_hazard(); + if (idx < 0) tlb_write_random(); - } else { + else tlb_write_indexed(); - } - BARRIER; + tlbw_use_hazard(); write_c0_entryhi(pid); - BARRIER; local_irq_restore(flags); } @@ -279,24 +239,26 @@ asid = read_c0_entryhi() & ASID_MASK; write_c0_entryhi(address | asid); pgdp = pgd_offset(vma->vm_mm, address); + mtc0_tlbw_hazard(); tlb_probe(); + BARRIER; pmdp = pmd_offset(pgdp, address); idx = read_c0_index(); ptep = pte_offset(pmdp, address); write_c0_entrylo0(pte_val(*ptep++) >> 6); write_c0_entrylo1(pte_val(*ptep) >> 6); - BARRIER; + mtc0_tlbw_hazard(); if (idx < 0) tlb_write_random(); else tlb_write_indexed(); - BARRIER; + tlbw_use_hazard(); local_irq_restore(flags); } #endif void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, - unsigned long entryhi, unsigned long pagemask) + unsigned long entryhi, unsigned long pagemask) { unsigned long flags; unsigned long wired; @@ -315,9 +277,9 @@ write_c0_entryhi(entryhi); write_c0_entrylo0(entrylo0); write_c0_entrylo1(entrylo1); - BARRIER; + mtc0_tlbw_hazard(); tlb_write_indexed(); - BARRIER; + tlbw_use_hazard(); write_c0_entryhi(old_ctx); BARRIER; @@ -355,17 +317,15 @@ } write_c0_index(temp_tlb_entry); - BARRIER; write_c0_pagemask(pagemask); write_c0_entryhi(entryhi); write_c0_entrylo0(entrylo0); write_c0_entrylo1(entrylo1); - BARRIER; + mtc0_tlbw_hazard(); tlb_write_indexed(); - BARRIER; + tlbw_use_hazard(); write_c0_entryhi(old_ctx); - BARRIER; write_c0_pagemask(old_pagemask); out: local_irq_restore(flags); @@ -375,7 +335,7 @@ static void __init probe_tlb(unsigned long config) { struct cpuinfo_mips *c = ¤t_cpu_data; - unsigned int reg; + unsigned int config1; /* * If this isn't a MIPS32 / MIPS64 compliant CPU. Config 1 register @@ -385,16 +345,16 @@ if ((c->processor_id & 0xff0000) == PRID_COMP_LEGACY) return; - reg = read_c0_config1(); + config1 = read_c0_config1(); if (!((config >> 7) & 3)) panic("No TLB present"); - c->tlbsize = ((reg >> 25) & 0x3f) + 1; + c->tlbsize = ((config1 >> 25) & 0x3f) + 1; } void __init r4k_tlb_init(void) { - u32 config = read_c0_config(); + unsigned int config = read_c0_config(); /* * You should never change this register: diff -Nur linux-2.4.32-rc1/arch/mips64/defconfig linux-2.4.32-rc1.mips/arch/mips64/defconfig --- linux-2.4.32-rc1/arch/mips64/defconfig 2005-01-19 15:09:30.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/defconfig 2005-03-18 13:13:23.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -470,9 +470,11 @@ # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set @@ -658,7 +660,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips64/defconfig-atlas linux-2.4.32-rc1.mips/arch/mips64/defconfig-atlas --- linux-2.4.32-rc1/arch/mips64/defconfig-atlas 2005-01-19 15:09:30.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/defconfig-atlas 2005-03-18 13:13:23.000000000 +0100 @@ -28,8 +28,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -232,11 +232,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -314,9 +309,11 @@ # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set @@ -474,7 +471,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips64/defconfig-decstation linux-2.4.32-rc1.mips/arch/mips64/defconfig-decstation --- linux-2.4.32-rc1/arch/mips64/defconfig-decstation 2005-01-19 15:09:30.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/defconfig-decstation 2005-03-18 13:13:23.000000000 +0100 @@ -28,8 +28,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -224,11 +224,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -307,9 +302,11 @@ # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set @@ -477,7 +474,6 @@ CONFIG_SERIAL_DEC_CONSOLE=y # CONFIG_DZ is not set CONFIG_ZS=y -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips64/defconfig-ip22 linux-2.4.32-rc1.mips/arch/mips64/defconfig-ip22 --- linux-2.4.32-rc1/arch/mips64/defconfig-ip22 2005-01-19 15:09:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/defconfig-ip22 2005-03-18 13:13:23.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -235,11 +235,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -319,9 +314,11 @@ # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set @@ -488,7 +485,6 @@ # CONFIG_SERIAL_TXX9_CONSOLE is not set # CONFIG_TXX927_SERIAL is not set CONFIG_IP22_SERIAL=y -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips64/defconfig-ip27 linux-2.4.32-rc1.mips/arch/mips64/defconfig-ip27 --- linux-2.4.32-rc1/arch/mips64/defconfig-ip27 2005-01-19 15:09:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/defconfig-ip27 2005-03-18 13:13:23.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -470,9 +470,11 @@ # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set @@ -658,7 +660,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips64/defconfig-jaguar linux-2.4.32-rc1.mips/arch/mips64/defconfig-jaguar --- linux-2.4.32-rc1/arch/mips64/defconfig-jaguar 2005-01-19 15:09:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/defconfig-jaguar 2005-03-18 13:13:23.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -227,11 +227,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -403,7 +398,6 @@ # CONFIG_SERIAL_TXX9 is not set # CONFIG_SERIAL_TXX9_CONSOLE is not set # CONFIG_TXX927_SERIAL is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips64/defconfig-malta linux-2.4.32-rc1.mips/arch/mips64/defconfig-malta --- linux-2.4.32-rc1/arch/mips64/defconfig-malta 2005-01-19 15:09:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/defconfig-malta 2005-04-19 14:19:34.000000000 +0200 @@ -22,16 +22,19 @@ # # CONFIG_ACER_PICA_61 is not set # CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_FICMMP is not set # CONFIG_MIPS_MIRAGE is not set # CONFIG_MIPS_DB1000 is not set # CONFIG_MIPS_DB1100 is not set # CONFIG_MIPS_DB1500 is not set # CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_DB1200 is not set # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_PB1200 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -146,9 +149,9 @@ CONFIG_BINFMT_ELF=y CONFIG_MIPS32_COMPAT=y CONFIG_MIPS32_O32=y -# CONFIG_MIPS32_N32 is not set +CONFIG_MIPS32_N32=y CONFIG_BINFMT_ELF32=y -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_MISC=y # CONFIG_OOM_KILLER is not set # CONFIG_CMDLINE_BOOL is not set @@ -235,11 +238,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -271,8 +269,83 @@ # # ATA/IDE/MFM/RLL support # -# CONFIG_IDE is not set +CONFIG_IDE=y + +# +# IDE, ATA and ATAPI Block devices +# +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_IDEDISK_STROKE is not set +# CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_DELKIN is not set +CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDETAPE=y +CONFIG_BLK_DEV_IDEFLOPPY=y +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_CMD640 is not set +# CONFIG_BLK_DEV_CMD640_ENHANCED is not set +# CONFIG_BLK_DEV_ISAPNP is not set +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_IDEPCI_SHARE_IRQ=y +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_IDEDMA_FORCED=y +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_PCI_WIP is not set +# CONFIG_BLK_DEV_ADMA100 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_WDC_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_AMD74XX_OVERRIDE is not set +# CONFIG_BLK_DEV_ATIIXP is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_HPT34X_AUTODMA is not set +# CONFIG_BLK_DEV_HPT366 is not set +CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_PDC202XX_BURST is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_RZ1000 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SIS5513 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_CHIPSETS is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_DMA_NONPCI is not set +# CONFIG_BLK_DEV_ATARAID is not set +# CONFIG_BLK_DEV_ATARAID_PDC is not set +# CONFIG_BLK_DEV_ATARAID_HPT is not set +# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set +# CONFIG_BLK_DEV_ATARAID_SII is not set # # SCSI support @@ -317,9 +390,11 @@ # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_MEGARAID2 is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set # CONFIG_SCSI_SATA_SIL is not set @@ -477,7 +552,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips64/defconfig-ocelotc linux-2.4.32-rc1.mips/arch/mips64/defconfig-ocelotc --- linux-2.4.32-rc1/arch/mips64/defconfig-ocelotc 2005-01-19 15:09:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/defconfig-ocelotc 2005-03-18 13:13:23.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -231,11 +231,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -453,7 +448,6 @@ # CONFIG_SERIAL_TXX9 is not set # CONFIG_SERIAL_TXX9_CONSOLE is not set # CONFIG_TXX927_SERIAL is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips64/defconfig-sb1250-swarm linux-2.4.32-rc1.mips/arch/mips64/defconfig-sb1250-swarm --- linux-2.4.32-rc1/arch/mips64/defconfig-sb1250-swarm 2005-01-19 15:09:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/defconfig-sb1250-swarm 2005-03-18 13:13:23.000000000 +0100 @@ -30,8 +30,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -90,6 +90,7 @@ # CONFIG_SIBYTE_TBPROF is not set CONFIG_SIBYTE_GENBUS_IDE=y CONFIG_SMP_CAPABLE=y +CONFIG_MIPS_RTC=y # CONFIG_SNI_RM200_PCI is not set # CONFIG_TANBAC_TB0226 is not set # CONFIG_TANBAC_TB0229 is not set @@ -253,11 +254,6 @@ # # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# Appletalk devices -# -# CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set @@ -432,7 +428,6 @@ CONFIG_SIBYTE_SB1250_DUART=y CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y CONFIG_SERIAL_CONSOLE=y -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 diff -Nur linux-2.4.32-rc1/arch/mips64/defconfig-sead linux-2.4.32-rc1.mips/arch/mips64/defconfig-sead --- linux-2.4.32-rc1/arch/mips64/defconfig-sead 2005-01-19 15:09:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/defconfig-sead 2005-03-18 13:13:23.000000000 +0100 @@ -28,8 +28,8 @@ # CONFIG_MIPS_PB1000 is not set # CONFIG_MIPS_PB1100 is not set # CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_HYDROGEN3 is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_MIPS_MTX1 is not set # CONFIG_COGENT_CSB250 is not set @@ -242,7 +242,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_MIPS_HYDROGEN3_BUTTONS is not set # CONFIG_UNIX98_PTYS is not set # diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/binfmt_elfn32.c linux-2.4.32-rc1.mips/arch/mips64/kernel/binfmt_elfn32.c --- linux-2.4.32-rc1/arch/mips64/kernel/binfmt_elfn32.c 2003-08-25 13:44:40.000000000 +0200 +++ linux-2.4.32-rc1.mips/arch/mips64/kernel/binfmt_elfn32.c 2005-01-26 03:40:47.000000000 +0100 @@ -116,4 +116,7 @@ #undef MODULE_DESCRIPTION #undef MODULE_AUTHOR +#undef TASK_SIZE +#define TASK_SIZE TASK_SIZE32 + #include "../../../fs/binfmt_elf.c" diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/binfmt_elfo32.c linux-2.4.32-rc1.mips/arch/mips64/kernel/binfmt_elfo32.c --- linux-2.4.32-rc1/arch/mips64/kernel/binfmt_elfo32.c 2003-08-25 13:44:40.000000000 +0200 +++ linux-2.4.32-rc1.mips/arch/mips64/kernel/binfmt_elfo32.c 2005-01-26 03:40:47.000000000 +0100 @@ -137,4 +137,7 @@ #undef MODULE_DESCRIPTION #undef MODULE_AUTHOR +#undef TASK_SIZE +#define TASK_SIZE TASK_SIZE32 + #include "../../../fs/binfmt_elf.c" diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/head.S linux-2.4.32-rc1.mips/arch/mips64/kernel/head.S --- linux-2.4.32-rc1/arch/mips64/kernel/head.S 2004-02-18 14:36:30.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/kernel/head.S 2004-11-22 14:38:26.000000000 +0100 @@ -91,6 +91,21 @@ __INIT NESTED(kernel_entry, 16, sp) # kernel entry point + .set push + /* + * For the moment disable interrupts, mark the kernel mode and + * set ST0_KX so that the CPU does not spit fire when using + * 64-bit addresses. A full initialization of the CPU's status + * register is done later in per_cpu_trap_init(). + */ + mfc0 t0, CP0_STATUS + or t0, ST0_CU0|ST0_KX|0x1f + xor t0, 0x1f + mtc0 t0, CP0_STATUS + + .set noreorder + sll zero,3 # ehb + .set reorder ori sp, 0xf # align stack on 16 byte. xori sp, 0xf @@ -103,8 +118,6 @@ ARC64_TWIDDLE_PC - CLI # disable interrupts - /* * The firmware/bootloader passes argc/argp/envp * to us as arguments. But clear bss first because @@ -125,6 +138,7 @@ dsubu sp, 4*SZREG # init stack pointer j init_arch + .set pop END(kernel_entry) #ifdef CONFIG_SMP @@ -133,6 +147,23 @@ * function after setting up the stack and gp registers. */ NESTED(smp_bootstrap, 16, sp) + .set push + /* + * For the moment disable interrupts and bootstrap exception + * vectors, mark the kernel mode and set ST0_KX so that the CPU + * does not spit fire when using 64-bit addresses. A full + * initialization of the CPU's status register is done later in + * per_cpu_trap_init(). + */ + mfc0 t0, CP0_STATUS + or t0, ST0_CU0|ST0_BEV|ST0_KX|0x1f + xor t0, ST0_BEV|0x1f + mtc0 t0, CP0_STATUS + + .set noreorder + sll zero,3 # ehb + .set reorder + #ifdef CONFIG_SGI_IP27 GET_NASID_ASM t1 dli t0, KLDIR_OFFSET + (KLI_KERN_VARS * KLDIR_ENT_SIZE) + \ @@ -146,19 +177,8 @@ ARC64_TWIDDLE_PC #endif /* CONFIG_SGI_IP27 */ - CLI - - /* - * For the moment set ST0_KU so the CPU will not spit fire when - * executing 64-bit instructions. The full initialization of the - * CPU's status register is done later in per_cpu_trap_init(). - */ - mfc0 t0, CP0_STATUS - or t0, ST0_KX - mtc0 t0, CP0_STATUS - jal start_secondary # XXX: IP27: cboot - + .set pop END(smp_bootstrap) #endif /* CONFIG_SMP */ diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/ioctl32.c linux-2.4.32-rc1.mips/arch/mips64/kernel/ioctl32.c --- linux-2.4.32-rc1/arch/mips64/kernel/ioctl32.c 2005-01-19 15:09:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/kernel/ioctl32.c 2005-01-26 03:36:17.000000000 +0100 @@ -2352,7 +2352,7 @@ IOCTL32_HANDLER(AUTOFS_IOC_SETTIMEOUT32, ioc_settimeout), IOCTL32_DEFAULT(AUTOFS_IOC_EXPIRE), IOCTL32_DEFAULT(AUTOFS_IOC_EXPIRE_MULTI), - IOCTL32_DEFAULT(AUTOFS_IOC_PROTSUBVER), + IOCTL32_DEFAULT(AUTOFS_IOC_PROTOSUBVER), IOCTL32_DEFAULT(AUTOFS_IOC_ASKREGHOST), IOCTL32_DEFAULT(AUTOFS_IOC_TOGGLEREGHOST), IOCTL32_DEFAULT(AUTOFS_IOC_ASKUMOUNT), diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/linux32.c linux-2.4.32-rc1.mips/arch/mips64/kernel/linux32.c --- linux-2.4.32-rc1/arch/mips64/kernel/linux32.c 2005-04-04 03:42:19.000000000 +0200 +++ linux-2.4.32-rc1.mips/arch/mips64/kernel/linux32.c 2005-04-22 15:01:00.000000000 +0200 @@ -1101,6 +1101,7 @@ * specially as they have atomicity guarantees and can handle * iovec's natively */ + inode = file->f_dentry->d_inode; if (inode->i_sock) { int err; err = sock_readv_writev(type, inode, file, iov, count, tot_len); @@ -1187,72 +1188,19 @@ lseek back to original location. They fail just like lseek does on non-seekable files. */ -asmlinkage ssize_t sys32_pread(unsigned int fd, char * buf, - size_t count, u32 unused, u64 a4, u64 a5) +asmlinkage ssize_t sys32_pread(unsigned int fd, char *buf, + size_t count, u32 unused, u64 a4, u64 a5) { - ssize_t ret; - struct file * file; - ssize_t (*read)(struct file *, char *, size_t, loff_t *); - loff_t pos; - - ret = -EBADF; - file = fget(fd); - if (!file) - goto bad_file; - if (!(file->f_mode & FMODE_READ)) - goto out; - pos = merge_64(a4, a5); - ret = locks_verify_area(FLOCK_VERIFY_READ, file->f_dentry->d_inode, - file, pos, count); - if (ret) - goto out; - ret = -EINVAL; - if (!file->f_op || !(read = file->f_op->read)) - goto out; - if (pos < 0) - goto out; - ret = read(file, buf, count, &pos); - if (ret > 0) - dnotify_parent(file->f_dentry, DN_ACCESS); -out: - fput(file); -bad_file: - return ret; + return sys_pread(fd, buf, count, merge_64(a4, a5)); } asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char * buf, size_t count, u32 unused, u64 a4, u64 a5) { - ssize_t ret; - struct file * file; - ssize_t (*write)(struct file *, const char *, size_t, loff_t *); - loff_t pos; + return sys_pwrite(fd, buf, count, merge_64(a4, a5)); +} - ret = -EBADF; - file = fget(fd); - if (!file) - goto bad_file; - if (!(file->f_mode & FMODE_WRITE)) - goto out; - pos = merge_64(a4, a5); - ret = locks_verify_area(FLOCK_VERIFY_WRITE, file->f_dentry->d_inode, - file, pos, count); - if (ret) - goto out; - ret = -EINVAL; - if (!file->f_op || !(write = file->f_op->write)) - goto out; - if (pos < 0) - goto out; - ret = write(file, buf, count, &pos); - if (ret > 0) - dnotify_parent(file->f_dentry, DN_MODIFY); -out: - fput(file); -bad_file: - return ret; -} /* * Ooo, nasty. We need here to frob 32-bit unsigned longs to * 64-bit unsigned longs. diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/process.c linux-2.4.32-rc1.mips/arch/mips64/kernel/process.c --- linux-2.4.32-rc1/arch/mips64/kernel/process.c 2003-08-25 13:44:40.000000000 +0200 +++ linux-2.4.32-rc1.mips/arch/mips64/kernel/process.c 2005-04-14 12:41:44.000000000 +0200 @@ -125,6 +125,25 @@ return 1; } +void dump_regs(elf_greg_t *gp, struct pt_regs *regs) +{ + int i; + + for (i = 0; i < EF_REG0; i++) + gp[i] = 0; + gp[EF_REG0] = 0; + for (i = 1; i <= 31; i++) + gp[EF_REG0 + i] = regs->regs[i]; + gp[EF_REG26] = 0; + gp[EF_REG27] = 0; + gp[EF_LO] = regs->lo; + gp[EF_HI] = regs->hi; + gp[EF_CP0_EPC] = regs->cp0_epc; + gp[EF_CP0_BADVADDR] = regs->cp0_badvaddr; + gp[EF_CP0_STATUS] = regs->cp0_status; + gp[EF_CP0_CAUSE] = regs->cp0_cause; +} + /* * Create a kernel thread */ diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/scall_64.S linux-2.4.32-rc1.mips/arch/mips64/kernel/scall_64.S --- linux-2.4.32-rc1/arch/mips64/kernel/scall_64.S 2005-01-19 15:09:32.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/kernel/scall_64.S 2005-02-07 22:21:54.000000000 +0100 @@ -102,15 +102,14 @@ trace_a_syscall: SAVE_STATIC - sd t2,PT_R1(sp) + move s0, t2 jal syscall_trace - ld t2,PT_R1(sp) ld a0, PT_R4(sp) # Restore argument registers ld a1, PT_R5(sp) ld a2, PT_R6(sp) ld a3, PT_R7(sp) - jalr t2 + jalr s0 li t0, -EMAXERRNO - 1 # error? sltu t0, t0, v0 diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/scall_n32.S linux-2.4.32-rc1.mips/arch/mips64/kernel/scall_n32.S --- linux-2.4.32-rc1/arch/mips64/kernel/scall_n32.S 2005-01-19 15:09:32.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/kernel/scall_n32.S 2005-02-07 22:21:54.000000000 +0100 @@ -106,15 +106,14 @@ trace_a_syscall: SAVE_STATIC - sd t2,PT_R1(sp) + move s0, t2 jal syscall_trace - ld t2,PT_R1(sp) ld a0, PT_R4(sp) # Restore argument registers ld a1, PT_R5(sp) ld a2, PT_R6(sp) ld a3, PT_R7(sp) - jalr t2 + jalr s0 li t0, -EMAXERRNO - 1 # error? sltu t0, t0, v0 diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/scall_o32.S linux-2.4.32-rc1.mips/arch/mips64/kernel/scall_o32.S --- linux-2.4.32-rc1/arch/mips64/kernel/scall_o32.S 2005-01-19 15:09:32.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/kernel/scall_o32.S 2005-02-14 04:52:57.000000000 +0100 @@ -118,9 +118,8 @@ sd a6, PT_R10(sp) sd a7, PT_R11(sp) - sd t2,PT_R1(sp) + move s0, t2 jal syscall_trace - ld t2,PT_R1(sp) ld a0, PT_R4(sp) # Restore argument registers ld a1, PT_R5(sp) @@ -129,7 +128,7 @@ ld a4, PT_R8(sp) ld a5, PT_R9(sp) - jalr t2 + jalr s0 li t0, -EMAXERRNO - 1 # error? sltu t0, t0, v0 @@ -576,6 +575,8 @@ sys_call_table: syscalltable + .purgem sys + .macro sys function, nargs .byte \nargs .endm diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/setup.c linux-2.4.32-rc1.mips/arch/mips64/kernel/setup.c --- linux-2.4.32-rc1/arch/mips64/kernel/setup.c 2005-01-19 15:09:32.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/kernel/setup.c 2004-11-22 14:38:26.000000000 +0100 @@ -129,14 +129,6 @@ */ load_mmu(); - /* - * On IP27, I am seeing the TS bit set when the kernel is loaded. - * Maybe because the kernel is in ckseg0 and not xkphys? Clear it - * anyway ... - */ - clear_c0_status(ST0_BEV|ST0_TS|ST0_CU1|ST0_CU2|ST0_CU3); - set_c0_status(ST0_CU0|ST0_KX|ST0_SX|ST0_FR); - start_kernel(); } diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/signal_n32.c linux-2.4.32-rc1.mips/arch/mips64/kernel/signal_n32.c --- linux-2.4.32-rc1/arch/mips64/kernel/signal_n32.c 2005-01-19 15:09:33.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/kernel/signal_n32.c 2005-02-07 22:10:53.000000000 +0100 @@ -68,7 +68,7 @@ }; extern asmlinkage int restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc); -extern int inline setup_sigcontext(struct pt_regs *regs, struct sigcontext *sc); +extern int setup_sigcontext(struct pt_regs *regs, struct sigcontext *sc); asmlinkage void sysn32_rt_sigreturn(abi64_no_regargs, struct pt_regs regs) { diff -Nur linux-2.4.32-rc1/arch/mips64/kernel/traps.c linux-2.4.32-rc1.mips/arch/mips64/kernel/traps.c --- linux-2.4.32-rc1/arch/mips64/kernel/traps.c 2005-01-19 15:09:33.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/kernel/traps.c 2005-04-12 22:25:34.000000000 +0200 @@ -462,9 +462,10 @@ } ll_task = current; + compute_return_epc(regs); + regs->regs[(opcode & RT) >> 16] = value; - compute_return_epc(regs); return; sig: @@ -495,8 +496,8 @@ goto sig; } if (ll_bit == 0 || ll_task != current) { - regs->regs[reg] = 0; compute_return_epc(regs); + regs->regs[reg] = 0; return; } @@ -505,9 +506,9 @@ goto sig; } + compute_return_epc(regs); regs->regs[reg] = 1; - compute_return_epc(regs); return; sig: @@ -809,13 +810,18 @@ void __init per_cpu_trap_init(void) { unsigned int cpu = smp_processor_id(); + unsigned int status_set = ST0_CU0|ST0_FR|ST0_KX|ST0_SX|ST0_UX; - /* Some firmware leaves the BEV flag set, clear it. */ - clear_c0_status(ST0_CU1|ST0_CU2|ST0_CU3|ST0_BEV); - set_c0_status(ST0_CU0|ST0_FR|ST0_KX|ST0_SX|ST0_UX); - + /* + * Disable coprocessors, enable 64-bit addressing and set FPU + * for the 32/32 FPR register model. Reset the BEV flag that + * some firmware may have left set and the TS bit (for IP27). + * Set XX for ISA IV code to work. + */ if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV) - set_c0_status(ST0_XX); + status_set |= ST0_XX; + change_c0_status(ST0_CU|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX, + status_set); /* * Some MIPS CPUs have a dedicated interrupt vector which reduces the @@ -825,13 +831,11 @@ set_c0_cause(CAUSEF_IV); cpu_data[cpu].asid_cache = ASID_FIRST_VERSION; - write_c0_context(((long)(&pgd_current[cpu])) << 23); - write_c0_wired(0); + TLBMISS_HANDLER_SETUP(); atomic_inc(&init_mm.mm_count); current->active_mm = &init_mm; - if (current->mm) - BUG(); + BUG_ON(current->mm); enter_lazy_tlb(&init_mm, current, cpu); } @@ -842,8 +846,6 @@ extern char except_vec4; unsigned long i; - per_cpu_trap_init(); - /* Copy the generic exception handlers to their final destination. */ memcpy((void *) KSEG0 , &except_vec0_generic, 0x80); memcpy((void *)(KSEG0 + 0x180), &except_vec3_generic, 0x80); @@ -933,6 +935,5 @@ flush_icache_range(KSEG0, KSEG0 + 0x400); - atomic_inc(&init_mm.mm_count); /* XXX UP? */ - current->active_mm = &init_mm; + per_cpu_trap_init(); } diff -Nur linux-2.4.32-rc1/arch/mips64/mm/cerr-sb1.c linux-2.4.32-rc1.mips/arch/mips64/mm/cerr-sb1.c --- linux-2.4.32-rc1/arch/mips64/mm/cerr-sb1.c 2004-02-18 14:36:30.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/mm/cerr-sb1.c 2004-12-13 18:37:26.000000000 +0100 @@ -252,14 +252,14 @@ /* Masks to select bits for Hamming parity, mask_72_64[i] for bit[i] */ static const uint64_t mask_72_64[8] = { - 0x0738C808099264FFL, - 0x38C808099264FF07L, - 0xC808099264FF0738L, - 0x08099264FF0738C8L, - 0x099264FF0738C808L, - 0x9264FF0738C80809L, - 0x64FF0738C8080992L, - 0xFF0738C808099264L + 0x0738C808099264FFULL, + 0x38C808099264FF07ULL, + 0xC808099264FF0738ULL, + 0x08099264FF0738C8ULL, + 0x099264FF0738C808ULL, + 0x9264FF0738C80809ULL, + 0x64FF0738C8080992ULL, + 0xFF0738C808099264ULL }; /* Calculate the parity on a range of bits */ @@ -331,9 +331,9 @@ ((lru >> 4) & 0x3), ((lru >> 6) & 0x3)); } - va = (taglo & 0xC0000FFFFFFFE000) | addr; + va = (taglo & 0xC0000FFFFFFFE000ULL) | addr; if ((taglo & (1 << 31)) && (((taglo >> 62) & 0x3) == 3)) - va |= 0x3FFFF00000000000; + va |= 0x3FFFF00000000000ULL; valid = ((taghi >> 29) & 1); if (valid) { tlo_tmp = taglo & 0xfff3ff; @@ -474,7 +474,7 @@ : "r" ((way << 13) | addr)); taglo = ((unsigned long long)taglohi << 32) | taglolo; - pa = (taglo & 0xFFFFFFE000) | addr; + pa = (taglo & 0xFFFFFFE000ULL) | addr; if (way == 0) { lru = (taghi >> 14) & 0xff; prom_printf("[Bank %d Set 0x%02x] LRU > %d %d %d %d > MRU\n", diff -Nur linux-2.4.32-rc1/arch/mips64/mm/c-r4k.c linux-2.4.32-rc1.mips/arch/mips64/mm/c-r4k.c --- linux-2.4.32-rc1/arch/mips64/mm/c-r4k.c 2005-01-19 15:09:33.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/mm/c-r4k.c 2005-02-06 22:55:42.000000000 +0100 @@ -867,9 +867,16 @@ * normally they'd suffer from aliases but magic in the hardware deals * with that for us so we don't need to take care ourselves. */ - if (c->cputype != CPU_R10000 && c->cputype != CPU_R12000) - if (c->dcache.waysize > PAGE_SIZE) - c->dcache.flags |= MIPS_CACHE_ALIASES; + switch (c->cputype) { + case CPU_R10000: + case CPU_R12000: + break; + case CPU_24K: + if (!(read_c0_config7() & (1 << 16))) + default: + if (c->dcache.waysize > PAGE_SIZE) + c->dcache.flags |= MIPS_CACHE_ALIASES; + } switch (c->cputype) { case CPU_20KC: @@ -1070,9 +1077,6 @@ setup_scache(); coherency_setup(); - if (c->dcache.sets * c->dcache.ways > PAGE_SIZE) - c->dcache.flags |= MIPS_CACHE_ALIASES; - r4k_blast_dcache_page_setup(); r4k_blast_dcache_page_indexed_setup(); r4k_blast_dcache_setup(); diff -Nur linux-2.4.32-rc1/arch/mips64/mm/tlbex-r4k.S linux-2.4.32-rc1.mips/arch/mips64/mm/tlbex-r4k.S --- linux-2.4.32-rc1/arch/mips64/mm/tlbex-r4k.S 2004-02-18 14:36:30.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/mm/tlbex-r4k.S 2005-06-06 16:46:22.000000000 +0200 @@ -125,6 +125,33 @@ nop END(except_vec1_r4k) + __FINIT + + .align 5 +LEAF(handle_vec1_r4k) + .set noat + LOAD_PTE2 k1 k0 9f + ld k0, 0(k1) # get even pte + ld k1, 8(k1) # get odd pte + PTE_RELOAD k0 k1 + mtc0_tlbw_hazard + tlbwr + tlbw_eret_hazard + eret + +9: # handle the vmalloc range + LOAD_KPTE2 k1 k0 invalid_vmalloc_address + ld k0, 0(k1) # get even pte + ld k1, 8(k1) # get odd pte + PTE_RELOAD k0 k1 + mtc0_tlbw_hazard + tlbwr + tlbw_eret_hazard + eret +END(handle_vec1_r4k) + + __INIT + LEAF(except_vec1_sb1) #if BCM1250_M3_WAR dmfc0 k0, CP0_BADVADDR @@ -134,28 +161,24 @@ bnez k0, 1f #endif .set noat - dla k0, handle_vec1_r4k + dla k0, handle_vec1_sb1 jr k0 nop 1: eret - nop END(except_vec1_sb1) __FINIT .align 5 -LEAF(handle_vec1_r4k) +LEAF(handle_vec1_sb1) .set noat LOAD_PTE2 k1 k0 9f ld k0, 0(k1) # get even pte ld k1, 8(k1) # get odd pte PTE_RELOAD k0 k1 - rm9000_tlb_hazard - b 1f - tlbwr -1: nop - rm9000_tlb_hazard + mtc0_tlbw_hazard + tlbwr eret 9: # handle the vmalloc range @@ -163,13 +186,10 @@ ld k0, 0(k1) # get even pte ld k1, 8(k1) # get odd pte PTE_RELOAD k0 k1 - rm9000_tlb_hazard - b 1f - tlbwr -1: nop - rm9000_tlb_hazard + mtc0_tlbw_hazard + tlbwr eret -END(handle_vec1_r4k) +END(handle_vec1_sb1) __INIT @@ -195,10 +215,8 @@ ld k0, 0(k1) # get even pte ld k1, 8(k1) # get odd pte PTE_RELOAD k0 k1 - rm9000_tlb_hazard - nop + mtc0_tlbw_hazard tlbwr - rm9000_tlb_hazard eret 9: # handle the vmalloc range @@ -206,10 +224,8 @@ ld k0, 0(k1) # get even pte ld k1, 8(k1) # get odd pte PTE_RELOAD k0 k1 - rm9000_tlb_hazard - nop + mtc0_tlbw_hazard tlbwr - rm9000_tlb_hazard eret END(handle_vec1_r10k) diff -Nur linux-2.4.32-rc1/arch/mips64/mm/tlb-r4k.c linux-2.4.32-rc1.mips/arch/mips64/mm/tlb-r4k.c --- linux-2.4.32-rc1/arch/mips64/mm/tlb-r4k.c 2005-01-19 15:09:33.000000000 +0100 +++ linux-2.4.32-rc1.mips/arch/mips64/mm/tlb-r4k.c 2004-11-25 23:18:38.000000000 +0100 @@ -1,24 +1,12 @@ /* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive * for more details. * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * MIPS64 CPU variant specific MMU routines. - * These routine are not optimized in any way, they are done in a generic way - * so they can be used on all MIPS64 compliant CPUs, and also done in an - * attempt not to break anything for the R4xx0 style CPUs. + * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) + * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle ralf@gnu.org + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved. */ #include #include @@ -30,9 +18,6 @@ #include #include -#undef DEBUG_TLB -#undef DEBUG_TLBUPDATE - extern void except_vec1_r4k(void); /* CP0 hazard avoidance. */ @@ -46,31 +31,23 @@ unsigned long old_ctx; int entry; -#ifdef DEBUG_TLB - printk("[tlball]"); -#endif - local_irq_save(flags); /* Save old context and create impossible VPN2 value */ old_ctx = read_c0_entryhi(); - write_c0_entryhi(XKPHYS); write_c0_entrylo0(0); write_c0_entrylo1(0); - BARRIER; entry = read_c0_wired(); /* Blast 'em all away. */ - while(entry < current_cpu_data.tlbsize) { - /* Make sure all entries differ. */ - write_c0_entryhi(XKPHYS+entry*0x2000); + while (entry < current_cpu_data.tlbsize) { + write_c0_entryhi(XKPHYS + entry*0x2000); write_c0_index(entry); - BARRIER; + mtc0_tlbw_hazard(); tlb_write_indexed(); - BARRIER; entry++; } - BARRIER; + tlbw_use_hazard(); write_c0_entryhi(old_ctx); local_irq_restore(flags); } @@ -79,12 +56,8 @@ { int cpu = smp_processor_id(); - if (cpu_context(cpu, mm) != 0) { -#ifdef DEBUG_TLB - printk("[tlbmm<%d>]", mm->context); -#endif + if (cpu_context(cpu, mm) != 0) drop_mmu_context(mm,cpu); - } } void local_flush_tlb_range(struct mm_struct *mm, unsigned long start, @@ -96,10 +69,6 @@ unsigned long flags; int size; -#ifdef DEBUG_TLB - printk("[tlbrange<%02x,%08lx,%08lx>]", (mm->context & ASID_MASK), - start, end); -#endif local_irq_save(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; size = (size + 1) >> 1; @@ -110,25 +79,25 @@ start &= (PAGE_MASK << 1); end += ((PAGE_SIZE << 1) - 1); end &= (PAGE_MASK << 1); - while(start < end) { + while (start < end) { int idx; write_c0_entryhi(start | newpid); start += (PAGE_SIZE << 1); - BARRIER; + mtc0_tlbw_hazard(); tlb_probe(); BARRIER; idx = read_c0_index(); write_c0_entrylo0(0); write_c0_entrylo1(0); - if(idx < 0) + if (idx < 0) continue; /* Make sure all entries differ. */ write_c0_entryhi(XKPHYS+idx*0x2000); - BARRIER; + mtc0_tlbw_hazard(); tlb_write_indexed(); - BARRIER; } + tlbw_use_hazard(); write_c0_entryhi(oldpid); } else { drop_mmu_context(mm, cpu); @@ -145,28 +114,26 @@ unsigned long flags; unsigned long oldpid, newpid, idx; -#ifdef DEBUG_TLB - printk("[tlbpage<%d,%08lx>]", vma->vm_mm->context, page); -#endif newpid = cpu_asid(cpu, vma->vm_mm); page &= (PAGE_MASK << 1); local_irq_save(flags); oldpid = read_c0_entryhi(); write_c0_entryhi(page | newpid); - BARRIER; + mtc0_tlbw_hazard(); tlb_probe(); BARRIER; idx = read_c0_index(); write_c0_entrylo0(0); write_c0_entrylo1(0); - if(idx < 0) + if (idx < 0) goto finish; /* Make sure all entries differ. */ write_c0_entryhi(XKPHYS+idx*0x2000); - BARRIER; + mtc0_tlbw_hazard(); tlb_write_indexed(); + tlbw_use_hazard(); + finish: - BARRIER; write_c0_entryhi(oldpid); local_irq_restore(flags); } @@ -186,7 +153,7 @@ local_irq_save(flags); write_c0_entryhi(page); - BARRIER; + mtc0_tlbw_hazard(); tlb_probe(); BARRIER; idx = read_c0_index(); @@ -195,10 +162,12 @@ if (idx >= 0) { /* Make sure all entries differ. */ write_c0_entryhi(KSEG0+idx*0x2000); + mtc0_tlbw_hazard(); tlb_write_indexed(); + tlbw_use_hazard(); } - BARRIER; write_c0_entryhi(oldpid); + local_irq_restore(flags); } @@ -208,7 +177,6 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) { unsigned long flags; - unsigned int asid; pgd_t *pgdp; pmd_t *pmdp; pte_t *ptep; @@ -222,70 +190,58 @@ pid = read_c0_entryhi() & ASID_MASK; -#ifdef DEBUG_TLB - if ((pid != (cpu_asid(smp_processor_id(), vma->vm_mm))) || - (cpu_context(smp_processor_id(), vma->vm_mm) == 0)) { - printk("update_mmu_cache: Wheee, bogus tlbpid mmpid=%d" - "tlbpid=%d\n", (int) (cpu_context(smp_processor_id(), - vma->vm_mm) & ASID_MASK), pid); - } -#endif - local_irq_save(flags); address &= (PAGE_MASK << 1); - write_c0_entryhi(address | (pid)); + write_c0_entryhi(address | pid); pgdp = pgd_offset(vma->vm_mm, address); - BARRIER; + mtc0_tlbw_hazard(); tlb_probe(); BARRIER; pmdp = pmd_offset(pgdp, address); idx = read_c0_index(); ptep = pte_offset(pmdp, address); - BARRIER; write_c0_entrylo0(pte_val(*ptep++) >> 6); write_c0_entrylo1(pte_val(*ptep) >> 6); - write_c0_entryhi(address | (pid)); - BARRIER; - if(idx < 0) { + write_c0_entryhi(address | pid); + mtc0_tlbw_hazard(); + if (idx < 0) tlb_write_random(); - } else { + else tlb_write_indexed(); - } - BARRIER; + tlbw_use_hazard(); write_c0_entryhi(pid); - BARRIER; local_irq_restore(flags); } -void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, - unsigned long entryhi, unsigned long pagemask) +void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, + unsigned long entryhi, unsigned long pagemask) { - unsigned long flags; - unsigned long wired; - unsigned long old_pagemask; - unsigned long old_ctx; - - local_irq_save(flags); - /* Save old context and create impossible VPN2 value */ - old_ctx = (read_c0_entryhi() & ASID_MASK); - old_pagemask = read_c0_pagemask(); - wired = read_c0_wired(); - write_c0_wired(wired + 1); - write_c0_index(wired); - BARRIER; - write_c0_pagemask(pagemask); - write_c0_entryhi(entryhi); - write_c0_entrylo0(entrylo0); - write_c0_entrylo1(entrylo1); - BARRIER; - tlb_write_indexed(); - BARRIER; - - write_c0_entryhi(old_ctx); - BARRIER; - write_c0_pagemask(old_pagemask); - local_flush_tlb_all(); - local_irq_restore(flags); + unsigned long flags; + unsigned long wired; + unsigned long old_pagemask; + unsigned long old_ctx; + + local_irq_save(flags); + /* Save old context and create impossible VPN2 value */ + old_ctx = read_c0_entryhi() & ASID_MASK; + old_pagemask = read_c0_pagemask(); + wired = read_c0_wired(); + write_c0_wired(wired + 1); + write_c0_index(wired); + BARRIER; + write_c0_pagemask(pagemask); + write_c0_entryhi(entryhi); + write_c0_entrylo0(entrylo0); + write_c0_entrylo1(entrylo1); + mtc0_tlbw_hazard(); + tlb_write_indexed(); + tlbw_use_hazard(); + + write_c0_entryhi(old_ctx); + BARRIER; + write_c0_pagemask(old_pagemask); + local_flush_tlb_all(); + local_irq_restore(flags); } /* @@ -317,17 +273,15 @@ } write_c0_index(temp_tlb_entry); - BARRIER; write_c0_pagemask(pagemask); write_c0_entryhi(entryhi); write_c0_entrylo0(entrylo0); write_c0_entrylo1(entrylo1); - BARRIER; + mtc0_tlbw_hazard(); tlb_write_indexed(); - BARRIER; + tlbw_use_hazard(); write_c0_entryhi(old_ctx); - BARRIER; write_c0_pagemask(old_pagemask); out: local_irq_restore(flags); @@ -348,15 +302,23 @@ return; config1 = read_c0_config1(); - if (!((config1 >> 7) & 3)) - panic("No MMU present"); + if (!((config >> 7) & 3)) + panic("No TLB present"); c->tlbsize = ((config1 >> 25) & 0x3f) + 1; } void __init r4k_tlb_init(void) { - unsigned long config = read_c0_config(); + unsigned int config = read_c0_config(); + + /* + * You should never change this register: + * - On R4600 1.7 the tlbp never hits for pages smaller than + * the value in the c0_pagemask register. + * - The entire mm handling assumes the c0_pagemask register to + * be set for 4kb pages. + */ probe_tlb(config); write_c0_pagemask(PM_DEFAULT_MASK); write_c0_wired(0); diff -Nur linux-2.4.32-rc1/drivers/char/au1000_gpio.c linux-2.4.32-rc1.mips/drivers/char/au1000_gpio.c --- linux-2.4.32-rc1/drivers/char/au1000_gpio.c 2003-08-25 13:44:41.000000000 +0200 +++ linux-2.4.32-rc1.mips/drivers/char/au1000_gpio.c 2003-12-20 14:18:51.000000000 +0100 @@ -246,7 +246,7 @@ static struct miscdevice au1000gpio_miscdev = { - GPIO_MINOR, + MISC_DYNAMIC_MINOR, "au1000_gpio", &au1000gpio_fops }; diff -Nur linux-2.4.32-rc1/drivers/char/au1550_psc_spi.c linux-2.4.32-rc1.mips/drivers/char/au1550_psc_spi.c --- linux-2.4.32-rc1/drivers/char/au1550_psc_spi.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/char/au1550_psc_spi.c 2005-02-11 21:37:24.000000000 +0100 @@ -0,0 +1,466 @@ +/* + * Driver for Alchemy Au1550 SPI on the PSC. + * + * Copyright 2004 Embedded Edge, LLC. + * dan@embeddededge.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_MIPS_PB1550 +#include +#endif + +#ifdef CONFIG_MIPS_DB1550 +#include +#endif + +#ifdef CONFIG_MIPS_PB1200 +#include +#endif + +/* This is just a simple programmed I/O SPI interface on the PSC of the 1550. + * We support open, close, write, and ioctl. The SPI is a full duplex + * interface, you can't read without writing. So, the write system call + * copies the bytes out to the SPI, and whatever is returned is placed + * in the same buffer. Kinda weird, maybe we'll change it, but for now + * it works OK. + * I didn't implement any DMA yet, and it's a debate about the necessity. + * The SPI clocks are usually quite fast, so data is sent/received as + * quickly as you can stuff the FIFO. The overhead of DMA and interrupts + * are usually far greater than the data transfer itself. If, however, + * we find applications that move large amounts of data, we may choose + * use the overhead of buffering and DMA to do the work. + */ + +/* The maximum clock rate specified in the manual is 2mHz. +*/ +#define MAX_BAUD_RATE (2 * 1000000) +#define PSC_INTCLK_RATE (32 * 1000000) + +static int inuse; + +/* We have to know what the user requested for the data length + * so we know how to stuff the fifo. The FIFO is 32 bits wide, + * and we have to load it with the bits to go in a single transfer. + */ +static uint spi_datalen; + +static int +au1550spi_master_done( int ms ) +{ + int timeout=ms; + volatile psc_spi_t *sp; + + sp = (volatile psc_spi_t *)SPI_PSC_BASE; + + /* Loop until MD is set or timeout has expired */ + while(!(sp->psc_spievent & PSC_SPIEVNT_MD) && timeout--) udelay(1000); + + if ( !timeout ) + return 0; + else + sp->psc_spievent |= PSC_SPIEVNT_MD; + + return 1; +} + +static int +au1550spi_open(struct inode *inode, struct file *file) +{ + if (inuse) + return -EBUSY; + + inuse = 1; + + MOD_INC_USE_COUNT; + + return 0; +} + +static ssize_t +au1550spi_write(struct file *fp, const char *bp, size_t count, loff_t *ppos) +{ + int bytelen, i; + size_t rcount, retval; + unsigned char sb, *rp, *wp; + uint fifoword, pcr, stat; + volatile psc_spi_t *sp; + + /* Get the number of bytes per transfer. + */ + bytelen = ((spi_datalen - 1) / 8) + 1; + + /* User needs to send us multiple of this count. + */ + if ((count % bytelen) != 0) + return -EINVAL; + + rp = wp = (unsigned char *)bp; + retval = rcount = count; + + /* Reset the FIFO. + */ + sp = (volatile psc_spi_t *)SPI_PSC_BASE; + sp->psc_spipcr = (PSC_SPIPCR_RC | PSC_SPIPCR_TC); + au_sync(); + do { + pcr = sp->psc_spipcr; + au_sync(); + } while (pcr != 0); + + /* Prime the transmit FIFO. + */ + while (count > 0) { + fifoword = 0; + for (i=0; ipsc_spitxrx = fifoword; + au_sync(); + stat = sp->psc_spistat; + au_sync(); + if (stat & PSC_SPISTAT_TF) + break; + } + + /* Start the transfer. + */ + sp->psc_spipcr = PSC_SPIPCR_MS; + au_sync(); + + /* Now, just keep the transmit fifo full and empty the receive. + */ + while (count > 0) { + stat = sp->psc_spistat; + au_sync(); + while ((stat & PSC_SPISTAT_RE) == 0) { + fifoword = sp->psc_spitxrx; + au_sync(); + for (i=0; i>= 8; + rp++; + } + rcount -= bytelen; + stat = sp->psc_spistat; + au_sync(); + } + if ((stat & PSC_SPISTAT_TF) == 0) { + fifoword = 0; + for (i=0; ipsc_spitxrx = fifoword; + au_sync(); + } + } + + /* All of the bytes for transmit have been written. Hang + * out waiting for any residual bytes that are yet to be + * read from the fifo. + */ + while (rcount > 0) { + stat = sp->psc_spistat; + au_sync(); + if ((stat & PSC_SPISTAT_RE) == 0) { + fifoword = sp->psc_spitxrx; + au_sync(); + for (i=0; i>= 8; + rp++; + } + rcount -= bytelen; + } + } + + /* Wait for MasterDone event. 30ms timeout */ + if (!au1550spi_master_done(30) ) retval = -EFAULT; + return retval; +} + +static int +au1550spi_release(struct inode *inode, struct file *file) +{ + MOD_DEC_USE_COUNT; + + inuse = 0; + + return 0; +} + +/* Set the baud rate closest to the request, then return the actual + * value we are using. + */ +static uint +set_baud_rate(uint baud) +{ + uint rate, tmpclk, brg, ctl, stat; + volatile psc_spi_t *sp; + + /* For starters, the input clock is divided by two. + */ + tmpclk = PSC_INTCLK_RATE/2; + + rate = tmpclk / baud; + + /* The dividers work as follows: + * baud = tmpclk / (2 * (brg + 1)) + */ + brg = (rate/2) - 1; + + /* Test BRG to ensure it will fit into the 6 bits allocated. + */ + + /* Make sure the device is disabled while we make the change. + */ + sp = (volatile psc_spi_t *)SPI_PSC_BASE; + ctl = sp->psc_spicfg; + au_sync(); + sp->psc_spicfg = ctl & ~PSC_SPICFG_DE_ENABLE; + au_sync(); + ctl = PSC_SPICFG_CLR_BAUD(ctl); + ctl |= PSC_SPICFG_SET_BAUD(brg); + sp->psc_spicfg = ctl; + au_sync(); + + /* If the device was running prior to getting here, wait for + * it to restart. + */ + if (ctl & PSC_SPICFG_DE_ENABLE) { + do { + stat = sp->psc_spistat; + au_sync(); + } while ((stat & PSC_SPISTAT_DR) == 0); + } + + /* Return the actual value. + */ + rate = tmpclk / (2 * (brg + 1)); + + return(rate); +} + +static uint +set_word_len(uint len) +{ + uint ctl, stat; + volatile psc_spi_t *sp; + + if ((len < 4) || (len > 24)) + return -EINVAL; + + /* Make sure the device is disabled while we make the change. + */ + sp = (volatile psc_spi_t *)SPI_PSC_BASE; + ctl = sp->psc_spicfg; + au_sync(); + sp->psc_spicfg = ctl & ~PSC_SPICFG_DE_ENABLE; + au_sync(); + ctl = PSC_SPICFG_CLR_LEN(ctl); + ctl |= PSC_SPICFG_SET_LEN(len); + sp->psc_spicfg = ctl; + au_sync(); + + /* If the device was running prior to getting here, wait for + * it to restart. + */ + if (ctl & PSC_SPICFG_DE_ENABLE) { + do { + stat = sp->psc_spistat; + au_sync(); + } while ((stat & PSC_SPISTAT_DR) == 0); + } + + return 0; +} + +static int +au1550spi_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + int status; + u32 val; + + status = 0; + + switch(cmd) { + case AU1550SPI_WORD_LEN: + status = set_word_len(arg); + break; + + case AU1550SPI_SET_BAUD: + if (get_user(val, (u32 *)arg)) + return -EFAULT; + + val = set_baud_rate(val); + if (put_user(val, (u32 *)arg)) + return -EFAULT; + break; + + default: + status = -ENOIOCTLCMD; + + } + + return status; +} + + +static struct file_operations au1550spi_fops = +{ + owner: THIS_MODULE, + write: au1550spi_write, + ioctl: au1550spi_ioctl, + open: au1550spi_open, + release: au1550spi_release, +}; + + +static struct miscdevice au1550spi_miscdev = +{ + MISC_DYNAMIC_MINOR, + "au1550_spi", + &au1550spi_fops +}; + + +int __init +au1550spi_init(void) +{ + uint clk, rate, stat; + volatile psc_spi_t *sp; + + /* Wire up Freq3 as a clock for the SPI. The PSC does + * factor of 2 divisor, so run a higher rate so we can + * get some granularity to the clock speeds. + * We can't do this in board set up because the frequency + * is computed too late. + */ + rate = get_au1x00_speed(); + rate /= PSC_INTCLK_RATE; + + /* The FRDIV in the frequency control is (FRDIV + 1) * 2 + */ + rate /=2; + rate--; + clk = au_readl(SYS_FREQCTRL1); + au_sync(); + clk &= ~SYS_FC_FRDIV3_MASK; + clk |= (rate << SYS_FC_FRDIV3_BIT); + clk |= SYS_FC_FE3; + au_writel(clk, SYS_FREQCTRL1); + au_sync(); + + /* Set up the clock source routing to get Freq3 to PSC0_intclk. + */ + clk = au_readl(SYS_CLKSRC); + au_sync(); + clk &= ~0x03e0; + clk |= (5 << 7); + au_writel(clk, SYS_CLKSRC); + au_sync(); + + /* Set up GPIO pin function to drive PSC0_SYNC1, which is + * the SPI Select. + */ + clk = au_readl(SYS_PINFUNC); + au_sync(); + clk |= 1; + au_writel(clk, SYS_PINFUNC); + au_sync(); + + /* Now, set up the PSC for SPI PIO mode. + */ + sp = (volatile psc_spi_t *)SPI_PSC_BASE; + sp->psc_ctrl = PSC_CTRL_DISABLE; + au_sync(); + sp->psc_sel = PSC_SEL_PS_SPIMODE; + sp->psc_spicfg = 0; + au_sync(); + sp->psc_ctrl = PSC_CTRL_ENABLE; + au_sync(); + do { + stat = sp->psc_spistat; + au_sync(); + } while ((stat & PSC_SPISTAT_SR) == 0); + + sp->psc_spicfg = (PSC_SPICFG_RT_FIFO8 | PSC_SPICFG_TT_FIFO8 | + PSC_SPICFG_DD_DISABLE | PSC_SPICFG_MO); + sp->psc_spicfg |= PSC_SPICFG_SET_LEN(8); + spi_datalen = 8; + sp->psc_spimsk = PSC_SPIMSK_ALLMASK; + au_sync(); + + set_baud_rate(1000000); + + sp->psc_spicfg |= PSC_SPICFG_DE_ENABLE; + do { + stat = sp->psc_spistat; + au_sync(); + } while ((stat & PSC_SPISTAT_DR) == 0); + + misc_register(&au1550spi_miscdev); + printk("Au1550 SPI driver\n"); + return 0; +} + + +void __exit +au1550spi_exit(void) +{ + misc_deregister(&au1550spi_miscdev); +} + + +module_init(au1550spi_init); +module_exit(au1550spi_exit); diff -Nur linux-2.4.32-rc1/drivers/char/Config.in linux-2.4.32-rc1.mips/drivers/char/Config.in --- linux-2.4.32-rc1/drivers/char/Config.in 2004-08-08 01:26:04.000000000 +0200 +++ linux-2.4.32-rc1.mips/drivers/char/Config.in 2005-02-11 22:09:56.000000000 +0100 @@ -313,14 +313,11 @@ if [ "$CONFIG_OBSOLETE" = "y" -a "$CONFIG_ALPHA_BOOK1" = "y" ]; then bool 'Tadpole ANA H8 Support (OBSOLETE)' CONFIG_H8 fi -if [ "$CONFIG_MIPS" = "y" -a "$CONFIG_NEW_TIME_C" = "y" ]; then - tristate 'Generic MIPS RTC Support' CONFIG_MIPS_RTC -fi if [ "$CONFIG_SGI_IP22" = "y" ]; then - bool 'SGI DS1286 RTC support' CONFIG_SGI_DS1286 + tristate 'Dallas DS1286 RTC support' CONFIG_DS1286 fi if [ "$CONFIG_SGI_IP27" = "y" ]; then - bool 'SGI M48T35 RTC support' CONFIG_SGI_IP27_RTC + tristate 'SGI M48T35 RTC support' CONFIG_SGI_IP27_RTC fi if [ "$CONFIG_TOSHIBA_RBTX4927" = "y" -o "$CONFIG_TOSHIBA_JMR3927" = "y" ]; then tristate 'Dallas DS1742 RTC support' CONFIG_DS1742 @@ -383,6 +380,11 @@ source drivers/char/drm/Config.in fi fi + +if [ "$CONFIG_X86" = "y" ]; then + tristate 'ACP Modem (Mwave) support' CONFIG_MWAVE +fi + endmenu if [ "$CONFIG_HOTPLUG" = "y" -a "$CONFIG_PCMCIA" != "n" ]; then @@ -391,6 +393,7 @@ if [ "$CONFIG_SOC_AU1X00" = "y" ]; then tristate ' Alchemy Au1x00 GPIO device support' CONFIG_AU1X00_GPIO tristate ' Au1000/ADS7846 touchscreen support' CONFIG_TS_AU1X00_ADS7846 + #tristate ' Alchemy Au1550 PSC SPI support' CONFIG_AU1550_PSC_SPI fi if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then tristate ' ITE GPIO' CONFIG_ITE_GPIO diff -Nur linux-2.4.32-rc1/drivers/char/decserial.c linux-2.4.32-rc1.mips/drivers/char/decserial.c --- linux-2.4.32-rc1/drivers/char/decserial.c 2003-08-25 13:44:41.000000000 +0200 +++ linux-2.4.32-rc1.mips/drivers/char/decserial.c 2004-09-28 02:53:01.000000000 +0200 @@ -3,95 +3,105 @@ * choose the right serial device at boot time * * triemer 6-SEP-1998 - * sercons.c is designed to allow the three different kinds + * sercons.c is designed to allow the three different kinds * of serial devices under the decstation world to co-exist - * in the same kernel. The idea here is to abstract + * in the same kernel. The idea here is to abstract * the pieces of the drivers that are common to this file * so that they do not clash at compile time and runtime. * * HK 16-SEP-1998 v0.002 * removed the PROM console as this is not a real serial * device. Added support for PROM console in drivers/char/tty_io.c - * instead. Although it may work to enable more than one + * instead. Although it may work to enable more than one * console device I strongly recommend to use only one. + * + * Copyright (C) 2004 Maciej W. Rozycki */ #include +#include #include + #include +#include + +extern int register_zs_hook(unsigned int channel, + struct dec_serial_hook *hook); +extern int unregister_zs_hook(unsigned int channel); + +extern int register_dz_hook(unsigned int channel, + struct dec_serial_hook *hook); +extern int unregister_dz_hook(unsigned int channel); +int register_dec_serial_hook(unsigned int channel, + struct dec_serial_hook *hook) +{ #ifdef CONFIG_ZS -extern int zs_init(void); + if (IOASIC) + return register_zs_hook(channel, hook); #endif - #ifdef CONFIG_DZ -extern int dz_init(void); + if (!IOASIC) + return register_dz_hook(channel, hook); #endif + return 0; +} -#ifdef CONFIG_SERIAL_DEC_CONSOLE - +int unregister_dec_serial_hook(unsigned int channel) +{ #ifdef CONFIG_ZS -extern void zs_serial_console_init(void); + if (IOASIC) + return unregister_zs_hook(channel); #endif - #ifdef CONFIG_DZ -extern void dz_serial_console_init(void); -#endif - + if (!IOASIC) + return unregister_dz_hook(channel); #endif + return 0; +} -/* rs_init - starts up the serial interface - - handle normal case of starting up the serial interface */ -#ifdef CONFIG_SERIAL_DEC +extern int zs_init(void); +extern int dz_init(void); +/* + * rs_init - starts up the serial interface - + * handle normal case of starting up the serial interface + */ int __init rs_init(void) { - -#if defined(CONFIG_ZS) && defined(CONFIG_DZ) - if (IOASIC) - return zs_init(); - else - return dz_init(); -#else - #ifdef CONFIG_ZS - return zs_init(); + if (IOASIC) + return zs_init(); #endif - #ifdef CONFIG_DZ - return dz_init(); -#endif - + if (!IOASIC) + return dz_init(); #endif + return -ENXIO; } __initcall(rs_init); -#endif #ifdef CONFIG_SERIAL_DEC_CONSOLE -/* dec_serial_console_init handles the special case of starting - * up the console on the serial port +extern void zs_serial_console_init(void); +extern void dz_serial_console_init(void); + +/* + * dec_serial_console_init handles the special case of starting + * up the console on the serial port */ void __init dec_serial_console_init(void) { -#if defined(CONFIG_ZS) && defined(CONFIG_DZ) - if (IOASIC) - zs_serial_console_init(); - else - dz_serial_console_init(); -#else - #ifdef CONFIG_ZS - zs_serial_console_init(); + if (IOASIC) + zs_serial_console_init(); #endif - #ifdef CONFIG_DZ - dz_serial_console_init(); -#endif - + if (!IOASIC) + dz_serial_console_init(); #endif } diff -Nur linux-2.4.32-rc1/drivers/char/ds1286.c linux-2.4.32-rc1.mips/drivers/char/ds1286.c --- linux-2.4.32-rc1/drivers/char/ds1286.c 2004-02-18 14:36:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/char/ds1286.c 2004-01-10 06:21:39.000000000 +0100 @@ -1,6 +1,10 @@ /* * DS1286 Real Time Clock interface for Linux * + * Copyright (C) 2003 TimeSys Corp. + * S. James Hill (James.Hill@timesys.com) + * (sjhill@realitydiluted.com) + * * Copyright (C) 1998, 1999, 2000 Ralf Baechle * * Based on code written by Paul Gortmaker. @@ -29,6 +33,7 @@ #include #include #include +#include #include #include #include @@ -95,6 +100,12 @@ return -EIO; } +void rtc_ds1286_wait(void) +{ + unsigned char sec = CMOS_READ(RTC_SECONDS); + while (sec == CMOS_READ(RTC_SECONDS)); +} + static int ds1286_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { @@ -249,23 +260,22 @@ { spin_lock_irq(&ds1286_lock); - if (ds1286_status & RTC_IS_OPEN) - goto out_busy; + if (ds1286_status & RTC_IS_OPEN) { + spin_unlock_irq(&ds1286_lock); + return -EBUSY; + } ds1286_status |= RTC_IS_OPEN; - spin_lock_irq(&ds1286_lock); + spin_unlock_irq(&ds1286_lock); return 0; - -out_busy: - spin_lock_irq(&ds1286_lock); - return -EBUSY; } static int ds1286_release(struct inode *inode, struct file *file) { + spin_lock_irq(&ds1286_lock); ds1286_status &= ~RTC_IS_OPEN; - + spin_unlock_irq(&ds1286_lock); return 0; } @@ -276,32 +286,6 @@ return 0; } -/* - * The various file operations we support. - */ - -static struct file_operations ds1286_fops = { - .llseek = no_llseek, - .read = ds1286_read, - .poll = ds1286_poll, - .ioctl = ds1286_ioctl, - .open = ds1286_open, - .release = ds1286_release, -}; - -static struct miscdevice ds1286_dev= -{ - .minor = RTC_MINOR, - .name = "rtc", - .fops = &ds1286_fops, -}; - -int __init ds1286_init(void) -{ - printk(KERN_INFO "DS1286 Real Time Clock Driver v%s\n", DS1286_VERSION); - return misc_register(&ds1286_dev); -} - static char *days[] = { "***", "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat" }; @@ -528,3 +512,38 @@ BCD_TO_BIN(alm_tm->tm_hour); alm_tm->tm_sec = 0; } + +static struct file_operations ds1286_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = ds1286_read, + .poll = ds1286_poll, + .ioctl = ds1286_ioctl, + .open = ds1286_open, + .release = ds1286_release, +}; + +static struct miscdevice ds1286_dev = +{ + .minor = RTC_MINOR, + .name = "rtc", + .fops = &ds1286_fops, +}; + +static int __init ds1286_init(void) +{ + printk(KERN_INFO "DS1286 Real Time Clock Driver v%s\n", DS1286_VERSION); + return misc_register(&ds1286_dev); +} + +static void __exit ds1286_exit(void) +{ + misc_deregister(&ds1286_dev); +} + +module_init(ds1286_init); +module_exit(ds1286_exit); +EXPORT_NO_SYMBOLS; + +MODULE_AUTHOR("Ralf Baechle"); +MODULE_LICENSE("GPL"); diff -Nur linux-2.4.32-rc1/drivers/char/ds1742.c linux-2.4.32-rc1.mips/drivers/char/ds1742.c --- linux-2.4.32-rc1/drivers/char/ds1742.c 2004-02-18 14:36:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/char/ds1742.c 2004-01-09 20:27:16.000000000 +0100 @@ -142,6 +142,7 @@ CMOS_WRITE(RTC_WRITE, RTC_CONTROL); /* convert */ + memset(&tm, 0, sizeof(struct rtc_time)); to_tm(t, &tm); /* check each field one by one */ @@ -216,6 +217,7 @@ unsigned long curr_time; curr_time = rtc_ds1742_get_time(); + memset(&tm, 0, sizeof(struct rtc_time)); to_tm(curr_time, &tm); p = buf; @@ -251,8 +253,8 @@ void rtc_ds1742_wait(void) { - while (CMOS_READ(RTC_SECONDS) & 1); - while (!(CMOS_READ(RTC_SECONDS) & 1)); + unsigned char sec = CMOS_READ(RTC_SECONDS); + while (sec == CMOS_READ(RTC_SECONDS)); } static int ds1742_ioctl(struct inode *inode, struct file *file, @@ -264,6 +266,7 @@ switch (cmd) { case RTC_RD_TIME: /* Read the time/date from RTC */ curr_time = rtc_ds1742_get_time(); + memset(&rtc_tm, 0, sizeof(struct rtc_time)); to_tm(curr_time, &rtc_tm); rtc_tm.tm_year -= 1900; return copy_to_user((void *) arg, &rtc_tm, sizeof(rtc_tm)) ? diff -Nur linux-2.4.32-rc1/drivers/char/dummy_keyb.c linux-2.4.32-rc1.mips/drivers/char/dummy_keyb.c --- linux-2.4.32-rc1/drivers/char/dummy_keyb.c 2003-08-25 13:44:41.000000000 +0200 +++ linux-2.4.32-rc1.mips/drivers/char/dummy_keyb.c 2004-01-09 09:53:08.000000000 +0100 @@ -140,3 +140,7 @@ { printk("Dummy keyboard driver installed.\n"); } +#ifdef CONFIG_MAGIC_SYSRQ +unsigned char kbd_sysrq_key; +unsigned char kbd_sysrq_xlate[128]; +#endif diff -Nur linux-2.4.32-rc1/drivers/char/dz.c linux-2.4.32-rc1.mips/drivers/char/dz.c --- linux-2.4.32-rc1/drivers/char/dz.c 2005-01-19 15:09:44.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/char/dz.c 2004-12-27 05:13:42.000000000 +0100 @@ -1,11 +1,13 @@ /* - * dz.c: Serial port driver for DECStations equiped + * dz.c: Serial port driver for DECstations equipped * with the DZ chipset. * * Copyright (C) 1998 Olivier A. D. Lebaillif * * Email: olivier.lebaillif@ifrsys.com * + * Copyright (C) 2004 Maciej W. Rozycki + * * [31-AUG-98] triemer * Changed IRQ to use Harald's dec internals interrupts.h * removed base_addr code - moving address assignment to setup.c @@ -24,6 +26,7 @@ #undef DEBUG_DZ #include +#include #include #include #include @@ -54,33 +57,56 @@ #include #include -#define CONSOLE_LINE (3) /* for definition of struct console */ +#ifdef CONFIG_MAGIC_SYSRQ +#include +#endif #include "dz.h" -#define DZ_INTR_DEBUG 1 - DECLARE_TASK_QUEUE(tq_serial); -static struct dz_serial *lines[4]; -static unsigned char tmp_buffer[256]; +static struct dz_serial multi[DZ_NB_PORT]; /* Four serial lines in the DZ chip */ +static struct tty_driver serial_driver, callout_driver; + +static struct tty_struct *serial_table[DZ_NB_PORT]; +static struct termios *serial_termios[DZ_NB_PORT]; +static struct termios *serial_termios_locked[DZ_NB_PORT]; + +static int serial_refcount; -#ifdef DEBUG_DZ /* - * debugging code to send out chars via prom + * tmp_buf is used as a temporary buffer by serial_write. We need to + * lock it in case the copy_from_user blocks while swapping in a page, + * and some other program tries to do a serial write at the same time. + * Since the lock will only come under contention when the system is + * swapping and available memory is low, it makes sense to share one + * buffer across all the serial ports, since it significantly saves + * memory if large numbers of serial ports are open. */ -static void debug_console(const char *s, int count) -{ - unsigned i; +static unsigned char *tmp_buf; +static DECLARE_MUTEX(tmp_buf_sem); - for (i = 0; i < count; i++) { - if (*s == 10) - prom_printf("%c", 13); - prom_printf("%c", *s++); - } -} +static char *dz_name __initdata = "DECstation DZ serial driver version "; +static char *dz_version __initdata = "1.03"; + +static struct dz_serial *lines[DZ_NB_PORT]; +static unsigned char tmp_buffer[256]; + +#ifdef CONFIG_SERIAL_DEC_CONSOLE +static struct console dz_sercons; +#endif +#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \ + !defined(MODULE) +static unsigned long break_pressed; /* break, really ... */ #endif +static void change_speed (struct dz_serial *); + +static int baud_table[] = { + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, + 9600, 0 +}; + /* * ------------------------------------------------------------ * dz_in () and dz_out () @@ -94,15 +120,16 @@ { volatile unsigned short *addr = (volatile unsigned short *) (info->port + offset); + return *addr; } static inline void dz_out(struct dz_serial *info, unsigned offset, unsigned short value) { - volatile unsigned short *addr = (volatile unsigned short *) (info->port + offset); + *addr = value; } @@ -143,25 +170,24 @@ tmp |= mask; /* set the TX flag */ dz_out(info, DZ_TCR, tmp); - } /* * ------------------------------------------------------------ - * Here starts the interrupt handling routines. All of the - * following subroutines are declared as inline and are folded - * into dz_interrupt. They were separated out for readability's - * sake. * - * Note: rs_interrupt() is a "fast" interrupt, which means that it + * Here starts the interrupt handling routines. All of the following + * subroutines are declared as inline and are folded into + * dz_interrupt(). They were separated out for readability's sake. + * + * Note: dz_interrupt() is a "fast" interrupt, which means that it * runs with interrupts turned off. People who may want to modify - * rs_interrupt() should try to keep the interrupt handler as fast as + * dz_interrupt() should try to keep the interrupt handler as fast as * possible. After you are done making modifications, it is not a bad * idea to do: * * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer dz.c * - * and look at the resulting assemble code in serial.s. + * and look at the resulting assemble code in dz.s. * * ------------------------------------------------------------ */ @@ -188,101 +214,97 @@ * This routine deals with inputs from any lines. * ------------------------------------------------------------ */ -static inline void receive_chars(struct dz_serial *info_in) +static inline void receive_chars(struct dz_serial *info_in, + struct pt_regs *regs) { - struct dz_serial *info; - struct tty_struct *tty = 0; + struct tty_struct *tty; struct async_icount *icount; - int ignore = 0; - unsigned short status, tmp; - unsigned char ch; - - /* this code is going to be a problem... - the call to tty_flip_buffer is going to need - to be rethought... - */ - do { - status = dz_in(info_in, DZ_RBUF); - info = lines[LINE(status)]; + int lines_rx[DZ_NB_PORT] = { [0 ... DZ_NB_PORT - 1] = 0 }; + unsigned short status; + unsigned char ch, flag; + int i; - /* punt so we don't get duplicate characters */ - if (!(status & DZ_DVAL)) - goto ignore_char; - - ch = UCHAR(status); /* grab the char */ - -#if 0 - if (info->is_console) { - if (ch == 0) - return; /* it's a break ... */ - } -#endif + while ((status = dz_in(info_in, DZ_RBUF)) & DZ_DVAL) { + info = lines[LINE(status)]; + tty = info->tty; /* point to the proper dev */ - tty = info->tty; /* now tty points to the proper dev */ - icount = &info->icount; + ch = UCHAR(status); /* grab the char */ - if (!tty) - break; - if (tty->flip.count >= TTY_FLIPBUF_SIZE) - break; + if (!tty && (!info->hook || !info->hook->rx_char)) + continue; - *tty->flip.char_buf_ptr = ch; - *tty->flip.flag_buf_ptr = 0; + icount = &info->icount; icount->rx++; - /* keep track of the statistics */ - if (status & (DZ_OERR | DZ_FERR | DZ_PERR)) { - if (status & DZ_PERR) /* parity error */ - icount->parity++; - else if (status & DZ_FERR) /* frame error */ - icount->frame++; - if (status & DZ_OERR) /* overrun error */ - icount->overrun++; - - /* check to see if we should ignore the character - and mask off conditions that should be ignored + flag = 0; + if (status & DZ_FERR) { /* frame error */ + /* + * There is no separate BREAK status bit, so + * treat framing errors as BREAKs for Magic SysRq + * and SAK; normally, otherwise. */ - - if (status & info->ignore_status_mask) { - if (++ignore > 100) - break; - goto ignore_char; +#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \ + !defined(MODULE) + if (info->line == dz_sercons.index) { + if (!break_pressed) + break_pressed = jiffies; + continue; } - /* mask off the error conditions we want to ignore */ - tmp = status & info->read_status_mask; - - if (tmp & DZ_PERR) { - *tty->flip.flag_buf_ptr = TTY_PARITY; -#ifdef DEBUG_DZ - debug_console("PERR\n", 5); -#endif - } else if (tmp & DZ_FERR) { - *tty->flip.flag_buf_ptr = TTY_FRAME; -#ifdef DEBUG_DZ - debug_console("FERR\n", 5); #endif + flag = TTY_BREAK; + if (info->flags & DZ_SAK) + do_SAK(tty); + else + flag = TTY_FRAME; + } else if (status & DZ_OERR) /* overrun error */ + flag = TTY_OVERRUN; + else if (status & DZ_PERR) /* parity error */ + flag = TTY_PARITY; + +#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \ + !defined(MODULE) + if (break_pressed && info->line == dz_sercons.index) { + if (time_before(jiffies, break_pressed + HZ * 5)) { + handle_sysrq(ch, regs, NULL, NULL); + break_pressed = 0; + continue; } - if (tmp & DZ_OERR) { -#ifdef DEBUG_DZ - debug_console("OERR\n", 5); + break_pressed = 0; + } #endif - if (tty->flip.count < TTY_FLIPBUF_SIZE) { - tty->flip.count++; - tty->flip.flag_buf_ptr++; - tty->flip.char_buf_ptr++; - *tty->flip.flag_buf_ptr = TTY_OVERRUN; - } - } + + if (info->hook && info->hook->rx_char) { + (*info->hook->rx_char)(ch, flag); + return; } - tty->flip.flag_buf_ptr++; - tty->flip.char_buf_ptr++; - tty->flip.count++; - ignore_char: - } while (status & DZ_DVAL); - if (tty) - tty_flip_buffer_push(tty); + /* keep track of the statistics */ + switch (flag) { + case TTY_FRAME: + icount->frame++; + break; + case TTY_PARITY: + icount->parity++; + break; + case TTY_OVERRUN: + icount->overrun++; + break; + case TTY_BREAK: + icount->brk++; + break; + default: + break; + } + + if ((status & info->ignore_status_mask) == 0) { + tty_insert_flip_char(tty, ch, flag); + lines_rx[LINE(status)] = 1; + } + } + for (i = 0; i < DZ_NB_PORT; i++) + if (lines_rx[i]) + tty_flip_buffer_push(lines[i]->tty); } /* @@ -292,20 +314,34 @@ * This routine deals with outputs to any lines. * ------------------------------------------------------------ */ -static inline void transmit_chars(struct dz_serial *info) +static inline void transmit_chars(struct dz_serial *info_in) { + struct dz_serial *info; + unsigned short status; unsigned char tmp; + status = dz_in(info_in, DZ_CSR); + info = lines[LINE(status)]; + if (info->hook || !info->tty) { + unsigned short mask, tmp; - if (info->x_char) { /* XON/XOFF chars */ + mask = 1 << info->line; + tmp = dz_in(info, DZ_TCR); /* read the TX flag */ + tmp &= ~mask; /* clear the TX flag */ + dz_out(info, DZ_TCR, tmp); + return; + } + + if (info->x_char) { /* XON/XOFF chars */ dz_out(info, DZ_TDR, info->x_char); info->icount.tx++; info->x_char = 0; return; } /* if nothing to do or stopped or hardware stopped */ - if ((info->xmit_cnt <= 0) || info->tty->stopped || info->tty->hw_stopped) { + if (info->xmit_cnt <= 0 || + info->tty->stopped || info->tty->hw_stopped) { dz_stop(info->tty); return; } @@ -359,15 +395,14 @@ */ static void dz_interrupt(int irq, void *dev, struct pt_regs *regs) { - struct dz_serial *info; + struct dz_serial *info = (struct dz_serial *)dev; unsigned short status; /* get the reason why we just got an irq */ - status = dz_in((struct dz_serial *) dev, DZ_CSR); - info = lines[LINE(status)]; /* re-arrange info the proper port */ + status = dz_in(info, DZ_CSR); if (status & DZ_RDONE) - receive_chars(info); /* the receive function */ + receive_chars(info, regs); if (status & DZ_TRDY) transmit_chars(info); @@ -514,7 +549,7 @@ info->cflags &= ~DZ_CREAD; /* turn off receive enable flag */ - dz_out(info, DZ_LPR, info->cflags); + dz_out(info, DZ_LPR, info->cflags | info->line); if (info->xmit_buf) { /* free Tx buffer */ free_page((unsigned long) info->xmit_buf); @@ -545,18 +580,21 @@ { unsigned long flags; unsigned cflag; - int baud; + int baud, i; - if (!info->tty || !info->tty->termios) - return; + if (!info->hook) { + if (!info->tty || !info->tty->termios) + return; + cflag = info->tty->termios->c_cflag; + } else { + cflag = info->hook->cflags; + } save_flags(flags); cli(); info->cflags = info->line; - cflag = info->tty->termios->c_cflag; - switch (cflag & CSIZE) { case CS5: info->cflags |= DZ_CS5; @@ -579,7 +617,16 @@ if (cflag & PARODD) info->cflags |= DZ_PARODD; - baud = tty_get_baud_rate(info->tty); + i = cflag & CBAUD; + if (i & CBAUDEX) { + i &= ~CBAUDEX; + if (!info->hook) + info->tty->termios->c_cflag &= ~CBAUDEX; + else + info->hook->cflags &= ~CBAUDEX; + } + baud = baud_table[i]; + switch (baud) { case 50: info->cflags |= DZ_B50; @@ -629,16 +676,16 @@ } info->cflags |= DZ_RXENAB; - dz_out(info, DZ_LPR, info->cflags); + dz_out(info, DZ_LPR, info->cflags | info->line); /* setup accept flag */ info->read_status_mask = DZ_OERR; - if (I_INPCK(info->tty)) + if (info->tty && I_INPCK(info->tty)) info->read_status_mask |= (DZ_FERR | DZ_PERR); /* characters to ignore */ info->ignore_status_mask = 0; - if (I_IGNPAR(info->tty)) + if (info->tty && I_IGNPAR(info->tty)) info->ignore_status_mask |= (DZ_FERR | DZ_PERR); restore_flags(flags); @@ -694,7 +741,7 @@ down(&tmp_buf_sem); while (1) { - c = MIN(count, MIN(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head)); + c = min(count, min(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head)); if (c <= 0) break; @@ -707,7 +754,7 @@ save_flags(flags); cli(); - c = MIN(c, MIN(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head)); + c = min(c, min(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head)); memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c); info->xmit_head = ((info->xmit_head + c) & (DZ_XMIT_SIZE - 1)); info->xmit_cnt += c; @@ -727,7 +774,7 @@ save_flags(flags); cli(); - c = MIN(count, MIN(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head)); + c = min(count, min(DZ_XMIT_SIZE - info->xmit_cnt - 1, DZ_XMIT_SIZE - info->xmit_head)); if (c <= 0) { restore_flags(flags); break; @@ -845,7 +892,7 @@ /* * ------------------------------------------------------------ - * rs_ioctl () and friends + * dz_ioctl () and friends * ------------------------------------------------------------ */ static int get_serial_info(struct dz_serial *info, @@ -958,6 +1005,9 @@ struct dz_serial *info = (struct dz_serial *) tty->driver_data; int retval; + if (info->hook) + return -ENODEV; + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) { @@ -1252,19 +1302,14 @@ int retval, line; line = MINOR(tty->device) - tty->driver.minor_start; - - /* The dz lines for the mouse/keyboard must be - * opened using their respective drivers. - */ if ((line < 0) || (line >= DZ_NB_PORT)) return -ENODEV; + info = lines[line]; - if ((line == DZ_KEYBOARD) || (line == DZ_MOUSE)) + if (info->hook) return -ENODEV; - info = lines[line]; info->count++; - tty->driver_data = info; info->tty = tty; @@ -1285,14 +1330,21 @@ else *tty->termios = info->callout_termios; change_speed(info); - } +#ifdef CONFIG_SERIAL_DEC_CONSOLE + if (dz_sercons.cflag && dz_sercons.index == line) { + tty->termios->c_cflag = dz_sercons.cflag; + dz_sercons.cflag = 0; + change_speed(info); + } +#endif + info->session = current->session; info->pgrp = current->pgrp; return 0; } -static void show_serial_version(void) +static void __init show_serial_version(void) { printk("%s%s\n", dz_name, dz_version); } @@ -1300,7 +1352,6 @@ int __init dz_init(void) { int i; - long flags; struct dz_serial *info; /* Setup base handler, and timer table. */ @@ -1311,9 +1362,9 @@ memset(&serial_driver, 0, sizeof(struct tty_driver)); serial_driver.magic = TTY_DRIVER_MAGIC; #if (LINUX_VERSION_CODE > 0x2032D && defined(CONFIG_DEVFS_FS)) - serial_driver.name = "ttyS"; -#else serial_driver.name = "tts/%d"; +#else + serial_driver.name = "ttyS"; #endif serial_driver.major = TTY_MAJOR; serial_driver.minor_start = 64; @@ -1352,9 +1403,9 @@ */ callout_driver = serial_driver; #if (LINUX_VERSION_CODE > 0x2032D && defined(CONFIG_DEVFS_FS)) - callout_driver.name = "cua"; -#else callout_driver.name = "cua/%d"; +#else + callout_driver.name = "cua"; #endif callout_driver.major = TTYAUX_MAJOR; callout_driver.subtype = SERIAL_TYPE_CALLOUT; @@ -1363,25 +1414,27 @@ panic("Couldn't register serial driver"); if (tty_register_driver(&callout_driver)) panic("Couldn't register callout driver"); - save_flags(flags); - cli(); for (i = 0; i < DZ_NB_PORT; i++) { info = &multi[i]; lines[i] = info; - info->magic = SERIAL_MAGIC; - + info->tty = 0; + info->x_char = 0; if (mips_machtype == MACH_DS23100 || mips_machtype == MACH_DS5100) info->port = (unsigned long) KN01_DZ11_BASE; else info->port = (unsigned long) KN02_DZ11_BASE; - info->line = i; - info->tty = 0; + + if (info->hook && info->hook->init_info) { + (*info->hook->init_info)(info); + continue; + } + + info->magic = SERIAL_MAGIC; info->close_delay = 50; info->closing_wait = 3000; - info->x_char = 0; info->event = 0; info->count = 0; info->blocked_open = 0; @@ -1393,25 +1446,16 @@ info->normal_termios = serial_driver.init_termios; init_waitqueue_head(&info->open_wait); init_waitqueue_head(&info->close_wait); - - /* - * If we are pointing to address zero then punt - not correctly - * set up in setup.c to handle this. - */ - if (!info->port) - return 0; - - printk("ttyS%02d at 0x%08x (irq = %d)\n", info->line, - info->port, dec_interrupt[DEC_IRQ_DZ11]); - + printk("ttyS%02d at 0x%08x (irq = %d) is a DC7085 DZ\n", + info->line, info->port, dec_interrupt[DEC_IRQ_DZ11]); tty_register_devfs(&serial_driver, 0, - serial_driver.minor_start + info->line); + serial_driver.minor_start + info->line); tty_register_devfs(&callout_driver, 0, - callout_driver.minor_start + info->line); + callout_driver.minor_start + info->line); } - /* reset the chip */ #ifndef CONFIG_SERIAL_DEC_CONSOLE + /* reset the chip */ dz_out(info, DZ_CSR, DZ_CLR); while (dz_in(info, DZ_CSR) & DZ_CLR); iob(); @@ -1420,43 +1464,104 @@ dz_out(info, DZ_CSR, DZ_MSE); #endif - /* order matters here... the trick is that flags - is updated... in request_irq - to immediatedly obliterate - it is unwise. */ - restore_flags(flags); - - if (request_irq(dec_interrupt[DEC_IRQ_DZ11], dz_interrupt, - SA_INTERRUPT, "DZ", lines[0])) + 0, "DZ", lines[0])) panic("Unable to register DZ interrupt"); + for (i = 0; i < DZ_NB_PORT; i++) + if (lines[i]->hook) { + startup(lines[i]); + if (lines[i]->hook->init_channel) + (*lines[i]->hook->init_channel)(lines[i]); + } + return 0; } -#ifdef CONFIG_SERIAL_DEC_CONSOLE -static void dz_console_put_char(unsigned char ch) +/* + * polling I/O routines + */ +static int dz_poll_tx_char(void *handle, unsigned char ch) { unsigned long flags; - int loops = 2500; - unsigned short tmp = ch; - /* this code sends stuff out to serial device - spinning its - wheels and waiting. */ + struct dz_serial *info = handle; + unsigned short csr, tcr, trdy, mask; + int loops = 10000; + int ret; - /* force the issue - point it at lines[3] */ - dz_console = &multi[CONSOLE_LINE]; + local_irq_save(flags); + csr = dz_in(info, DZ_CSR); + dz_out(info, DZ_CSR, csr & ~DZ_TIE); + tcr = dz_in(info, DZ_TCR); + tcr |= 1 << info->line; + mask = tcr; + dz_out(info, DZ_TCR, mask); + iob(); + local_irq_restore(flags); - save_flags(flags); - cli(); + while (loops--) { + trdy = dz_in(info, DZ_CSR); + if (!(trdy & DZ_TRDY)) + continue; + trdy = (trdy & DZ_TLINE) >> 8; + if (trdy == info->line) + break; + mask &= ~(1 << trdy); + dz_out(info, DZ_TCR, mask); + iob(); + udelay(2); + } + if (loops) { + dz_out(info, DZ_TDR, ch); + ret = 0; + } else + ret = -EAGAIN; - /* spin our wheels */ - while (((dz_in(dz_console, DZ_CSR) & DZ_TRDY) != DZ_TRDY) && loops--); + dz_out(info, DZ_TCR, tcr); + dz_out(info, DZ_CSR, csr); - /* Actually transmit the character. */ - dz_out(dz_console, DZ_TDR, tmp); + return ret; +} - restore_flags(flags); +static int dz_poll_rx_char(void *handle) +{ + return -ENODEV; +} + +int register_dz_hook(unsigned int channel, struct dec_serial_hook *hook) +{ + struct dz_serial *info = multi + channel; + + if (info->hook) { + printk("%s: line %d has already a hook registered\n", + __FUNCTION__, channel); + + return 0; + } else { + hook->poll_rx_char = dz_poll_rx_char; + hook->poll_tx_char = dz_poll_tx_char; + info->hook = hook; + + return 1; + } +} + +int unregister_dz_hook(unsigned int channel) +{ + struct dz_serial *info = &multi[channel]; + + if (info->hook) { + info->hook = NULL; + return 1; + } else { + printk("%s: trying to unregister hook on line %d," + " but none is registered\n", __FUNCTION__, channel); + return 0; + } } + +#ifdef CONFIG_SERIAL_DEC_CONSOLE /* * ------------------------------------------------------------------- * dz_console_print () @@ -1465,17 +1570,19 @@ * The console must be locked when we get here. * ------------------------------------------------------------------- */ -static void dz_console_print(struct console *cons, +static void dz_console_print(struct console *co, const char *str, unsigned int count) { + struct dz_serial *info = multi + co->index; + #ifdef DEBUG_DZ prom_printf((char *) str); #endif while (count--) { if (*str == '\n') - dz_console_put_char('\r'); - dz_console_put_char(*str++); + dz_poll_tx_char(info, '\r'); + dz_poll_tx_char(info, *str++); } } @@ -1486,12 +1593,12 @@ static int __init dz_console_setup(struct console *co, char *options) { + struct dz_serial *info = multi + co->index; int baud = 9600; int bits = 8; int parity = 'n'; int cflag = CREAD | HUPCL | CLOCAL; char *s; - unsigned short mask, tmp; if (options) { baud = simple_strtoul(options, NULL, 10); @@ -1542,44 +1649,31 @@ } co->cflag = cflag; - /* TOFIX: force to console line */ - dz_console = &multi[CONSOLE_LINE]; if ((mips_machtype == MACH_DS23100) || (mips_machtype == MACH_DS5100)) - dz_console->port = KN01_DZ11_BASE; + info->port = KN01_DZ11_BASE; else - dz_console->port = KN02_DZ11_BASE; - dz_console->line = CONSOLE_LINE; + info->port = KN02_DZ11_BASE; + info->line = co->index; - dz_out(dz_console, DZ_CSR, DZ_CLR); - while ((tmp = dz_in(dz_console, DZ_CSR)) & DZ_CLR); + dz_out(info, DZ_CSR, DZ_CLR); + while (dz_in(info, DZ_CSR) & DZ_CLR); /* enable scanning */ - dz_out(dz_console, DZ_CSR, DZ_MSE); + dz_out(info, DZ_CSR, DZ_MSE); /* Set up flags... */ - dz_console->cflags = 0; - dz_console->cflags |= DZ_B9600; - dz_console->cflags |= DZ_CS8; - dz_console->cflags |= DZ_PARENB; - dz_out(dz_console, DZ_LPR, dz_console->cflags); - - mask = 1 << dz_console->line; - tmp = dz_in(dz_console, DZ_TCR); /* read the TX flag */ - if (!(tmp & mask)) { - tmp |= mask; /* set the TX flag */ - dz_out(dz_console, DZ_TCR, tmp); - } + dz_out(info, DZ_LPR, cflag | info->line); + return 0; } -static struct console dz_sercons = -{ - .name = "ttyS", - .write = dz_console_print, - .device = dz_console_device, - .setup = dz_console_setup, - .flags = CON_CONSDEV | CON_PRINTBUFFER, - .index = CONSOLE_LINE, +static struct console dz_sercons = { + .name = "ttyS", + .write = dz_console_print, + .device = dz_console_device, + .setup = dz_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, }; void __init dz_serial_console_init(void) diff -Nur linux-2.4.32-rc1/drivers/char/dz.h linux-2.4.32-rc1.mips/drivers/char/dz.h --- linux-2.4.32-rc1/drivers/char/dz.h 2002-08-03 02:39:43.000000000 +0200 +++ linux-2.4.32-rc1.mips/drivers/char/dz.h 2004-09-28 02:53:01.000000000 +0200 @@ -10,6 +10,8 @@ #ifndef DZ_SERIAL_H #define DZ_SERIAL_H +#include + #define SERIAL_MAGIC 0x5301 /* @@ -17,6 +19,7 @@ */ #define DZ_TRDY 0x8000 /* Transmitter empty */ #define DZ_TIE 0x4000 /* Transmitter Interrupt Enable */ +#define DZ_TLINE 0x0300 /* Transmitter Line Number */ #define DZ_RDONE 0x0080 /* Receiver data ready */ #define DZ_RIE 0x0040 /* Receive Interrupt Enable */ #define DZ_MSE 0x0020 /* Master Scan Enable */ @@ -37,19 +40,30 @@ #define UCHAR(x) (unsigned char)(x & DZ_RBUF_MASK) /* - * Definitions for the Transmit Register. + * Definitions for the Transmit Control Register. */ #define DZ_LINE_KEYBOARD 0x0001 #define DZ_LINE_MOUSE 0x0002 #define DZ_LINE_MODEM 0x0004 #define DZ_LINE_PRINTER 0x0008 +#define DZ_MODEM_RTS 0x0800 /* RTS for the modem line (2) */ #define DZ_MODEM_DTR 0x0400 /* DTR for the modem line (2) */ +#define DZ_PRINT_RTS 0x0200 /* RTS for the printer line (3) */ +#define DZ_PRINT_DTR 0x0100 /* DTR for the printer line (3) */ +#define DZ_LNENB 0x000f /* Transmitter Line Enable */ /* * Definitions for the Modem Status Register. */ +#define DZ_MODEM_RI 0x0800 /* RI for the modem line (2) */ +#define DZ_MODEM_CD 0x0400 /* CD for the modem line (2) */ #define DZ_MODEM_DSR 0x0200 /* DSR for the modem line (2) */ +#define DZ_MODEM_CTS 0x0100 /* CTS for the modem line (2) */ +#define DZ_PRINT_RI 0x0008 /* RI for the printer line (2) */ +#define DZ_PRINT_CD 0x0004 /* CD for the printer line (2) */ +#define DZ_PRINT_DSR 0x0002 /* DSR for the printer line (2) */ +#define DZ_PRINT_CTS 0x0001 /* CTS for the printer line (2) */ /* * Definitions for the Transmit Data Register. @@ -115,9 +129,6 @@ #define DZ_EVENT_WRITE_WAKEUP 0 -#ifndef MIN -#define MIN(a,b) ((a) < (b) ? (a) : (b)) - #define DZ_INITIALIZED 0x80000000 /* Serial port was initialized */ #define DZ_CALLOUT_ACTIVE 0x40000000 /* Call out device is active */ #define DZ_NORMAL_ACTIVE 0x20000000 /* Normal device is active */ @@ -129,6 +140,7 @@ #define DZ_CLOSING_WAIT_INF 0 #define DZ_CLOSING_WAIT_NONE 65535 +#define DZ_SAK 0x0004 /* Secure Attention Key (Orange book) */ #define DZ_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */ #define DZ_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */ #define DZ_PGRP_LOCKOUT 0x0200 /* Lock out cua opens based on pgrp */ @@ -166,79 +178,9 @@ long session; /* Session of opening process */ long pgrp; /* pgrp of opening process */ + struct dec_serial_hook *hook; /* Hook on this channel. */ unsigned char is_console; /* flag indicating a serial console */ unsigned char is_initialized; }; -static struct dz_serial multi[DZ_NB_PORT]; /* Four serial lines in the DZ chip */ -static struct dz_serial *dz_console; -static struct tty_driver serial_driver, callout_driver; - -static struct tty_struct *serial_table[DZ_NB_PORT]; -static struct termios *serial_termios[DZ_NB_PORT]; -static struct termios *serial_termios_locked[DZ_NB_PORT]; - -static int serial_refcount; - -/* - * tmp_buf is used as a temporary buffer by serial_write. We need to - * lock it in case the copy_from_user blocks while swapping in a page, - * and some other program tries to do a serial write at the same time. - * Since the lock will only come under contention when the system is - * swapping and available memory is low, it makes sense to share one - * buffer across all the serial ports, since it significantly saves - * memory if large numbers of serial ports are open. - */ -static unsigned char *tmp_buf; -static DECLARE_MUTEX(tmp_buf_sem); - -static char *dz_name = "DECstation DZ serial driver version "; -static char *dz_version = "1.02"; - -static inline unsigned short dz_in (struct dz_serial *, unsigned); -static inline void dz_out (struct dz_serial *, unsigned, unsigned short); - -static inline void dz_sched_event (struct dz_serial *, int); -static inline void receive_chars (struct dz_serial *); -static inline void transmit_chars (struct dz_serial *); -static inline void check_modem_status (struct dz_serial *); - -static void dz_stop (struct tty_struct *); -static void dz_start (struct tty_struct *); -static void dz_interrupt (int, void *, struct pt_regs *); -static void do_serial_bh (void); -static void do_softint (void *); -static void do_serial_hangup (void *); -static void change_speed (struct dz_serial *); -static void dz_flush_chars (struct tty_struct *); -static void dz_console_print (struct console *, const char *, unsigned int); -static void dz_flush_buffer (struct tty_struct *); -static void dz_throttle (struct tty_struct *); -static void dz_unthrottle (struct tty_struct *); -static void dz_send_xchar (struct tty_struct *, char); -static void shutdown (struct dz_serial *); -static void send_break (struct dz_serial *, int); -static void dz_set_termios (struct tty_struct *, struct termios *); -static void dz_close (struct tty_struct *, struct file *); -static void dz_hangup (struct tty_struct *); -static void show_serial_version (void); - -static int dz_write (struct tty_struct *, int, const unsigned char *, int); -static int dz_write_room (struct tty_struct *); -static int dz_chars_in_buffer (struct tty_struct *); -static int startup (struct dz_serial *); -static int get_serial_info (struct dz_serial *, struct serial_struct *); -static int set_serial_info (struct dz_serial *, struct serial_struct *); -static int get_lsr_info (struct dz_serial *, unsigned int *); -static int dz_ioctl (struct tty_struct *, struct file *, unsigned int, unsigned long); -static int block_til_ready (struct tty_struct *, struct file *, struct dz_serial *); -static int dz_open (struct tty_struct *, struct file *); - -#ifdef MODULE -int init_module (void) -void cleanup_module (void) -#endif - -#endif - #endif /* DZ_SERIAL_H */ diff -Nur linux-2.4.32-rc1/drivers/char/ibm_workpad_keymap.map linux-2.4.32-rc1.mips/drivers/char/ibm_workpad_keymap.map --- linux-2.4.32-rc1/drivers/char/ibm_workpad_keymap.map 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/char/ibm_workpad_keymap.map 2003-12-20 15:20:44.000000000 +0100 @@ -0,0 +1,343 @@ +# Keymap for IBM Workpad z50 +# US Mapping +# +# by Michael Klar +# +# This is a great big mess on account of how the Caps Lock key is handled as +# LeftShift-RightShift. Right shift key had to be broken out, so don't use +# use this map file as a basis for other keyboards that don't do the same +# thing with Caps Lock. +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. + +keymaps 0-2,4-5,8,12,32-33,36-37 +strings as usual + +keycode 0 = F1 F11 Console_13 + shiftr keycode 0 = F11 + shift shiftr keycode 0 = F11 + control keycode 0 = F1 + alt keycode 0 = Console_1 + control alt keycode 0 = Console_1 +keycode 1 = F3 F13 Console_15 + shiftr keycode 1 = F13 + shift shiftr keycode 1 = F13 + control keycode 1 = F3 + alt keycode 1 = Console_3 + control alt keycode 1 = Console_3 +keycode 2 = F5 F15 Console_17 + shiftr keycode 2 = F15 + shift shiftr keycode 2 = F15 + control keycode 2 = F5 + alt keycode 2 = Console_5 + control alt keycode 2 = Console_5 +keycode 3 = F7 F17 Console_19 + shiftr keycode 3 = F17 + shift shiftr keycode 3 = F17 + control keycode 3 = F7 + alt keycode 3 = Console_7 + control alt keycode 3 = Console_7 +keycode 4 = F9 F19 Console_21 + shiftr keycode 4 = F19 + shift shiftr keycode 4 = F19 + control keycode 4 = F9 + alt keycode 4 = Console_9 + control alt keycode 4 = Console_9 +#keycode 5 is contrast down +#keycode 6 is contrast up +keycode 7 = F11 F11 Console_23 + shiftr keycode 7 = F11 + shift shiftr keycode 7 = F11 + control keycode 7 = F11 + alt keycode 7 = Console_11 + control alt keycode 7 = Console_11 +keycode 8 = F2 F12 Console_14 + shiftr keycode 8 = F12 + shift shiftr keycode 8 = F12 + control keycode 8 = F2 + alt keycode 8 = Console_2 + control alt keycode 8 = Console_2 +keycode 9 = F4 F14 Console_16 + shiftr keycode 9 = F14 + shift shiftr keycode 9 = F14 + control keycode 9 = F4 + alt keycode 9 = Console_4 + control alt keycode 9 = Console_4 +keycode 10 = F6 F16 Console_18 + shiftr keycode 10 = F16 + shift shiftr keycode 10 = F16 + control keycode 10 = F6 + alt keycode 10 = Console_6 + control alt keycode 10 = Console_6 +keycode 11 = F8 F18 Console_20 + shiftr keycode 11 = F18 + shift shiftr keycode 11 = F18 + control keycode 11 = F8 + alt keycode 11 = Console_8 + control alt keycode 11 = Console_8 +keycode 12 = F10 F20 Console_22 + shiftr keycode 12 = F20 + shift shiftr keycode 12 = F20 + control keycode 12 = F10 + alt keycode 12 = Console_10 + control alt keycode 12 = Console_10 +#keycode 13 is brightness down +#keycode 14 is brightness up +keycode 15 = F12 F12 Console_24 + shiftr keycode 15 = F12 + shift shiftr keycode 15 = F12 + control keycode 15 = F12 + alt keycode 15 = Console_12 + control alt keycode 15 = Console_12 +keycode 16 = apostrophe quotedbl + shiftr keycode 16 = quotedbl + shift shiftr keycode 16 = quotedbl + control keycode 16 = Control_g + alt keycode 16 = Meta_apostrophe +keycode 17 = bracketleft braceleft + shiftr keycode 17 = braceleft + shift shiftr keycode 17 = braceleft + control keycode 17 = Escape + alt keycode 17 = Meta_bracketleft +keycode 18 = minus underscore backslash + shiftr keycode 18 = underscore + shift shiftr keycode 18 = underscore + control keycode 18 = Control_underscore + shift control keycode 18 = Control_underscore + shiftr control keycode 18 = Control_underscore + shift shiftr control keycode 18 = Control_underscore + alt keycode 18 = Meta_minus +keycode 19 = zero parenright braceright + shiftr keycode 19 = parenright + shift shiftr keycode 19 = parenright + alt keycode 19 = Meta_zero +keycode 20 = p + shiftr keycode 20 = +P + shift shiftr keycode 20 = +p +keycode 21 = semicolon colon + shiftr keycode 21 = colon + shift shiftr keycode 21 = colon + alt keycode 21 = Meta_semicolon +keycode 22 = Up Scroll_Backward + shiftr keycode 22 = Scroll_Backward + shift shiftr keycode 22 = Scroll_Backward + alt keycode 22 = Prior +keycode 23 = slash question + shiftr keycode 23 = question + shift shiftr keycode 23 = question + control keycode 23 = Delete + alt keycode 23 = Meta_slash + +keycode 27 = nine parenleft bracketright + shiftr keycode 27 = parenleft + shift shiftr keycode 27 = parenleft + alt keycode 27 = Meta_nine +keycode 28 = o + shiftr keycode 28 = +O + shift shiftr keycode 28 = +o +keycode 29 = l + shiftr keycode 29 = +L + shift shiftr keycode 29 = +l +keycode 30 = period greater + shiftr keycode 30 = greater + shift shiftr keycode 30 = greater + control keycode 30 = Compose + alt keycode 30 = Meta_period + +keycode 32 = Left Decr_Console + shiftr keycode 32 = Decr_Console + shift shiftr keycode 32 = Decr_Console + alt keycode 32 = Home +keycode 33 = bracketright braceright asciitilde + shiftr keycode 33 = braceright + shift shiftr keycode 33 = braceright + control keycode 33 = Control_bracketright + alt keycode 33 = Meta_bracketright +keycode 34 = equal plus + shiftr keycode 34 = plus + shift shiftr keycode 34 = plus + alt keycode 34 = Meta_equal +keycode 35 = eight asterisk bracketleft + shiftr keycode 35 = asterisk + shift shiftr keycode 35 = asterisk + control keycode 35 = Delete + alt keycode 35 = Meta_eight +keycode 36 = i + shiftr keycode 36 = +I + shift shiftr keycode 36 = +i +keycode 37 = k + shiftr keycode 37 = +K + shift shiftr keycode 37 = +k +keycode 38 = comma less + shiftr keycode 38 = less + shift shiftr keycode 38 = less + alt keycode 38 = Meta_comma + +keycode 40 = h + shiftr keycode 40 = +H + shift shiftr keycode 40 = +h +keycode 41 = y + shiftr keycode 41 = +Y + shift shiftr keycode 41 = +y +keycode 42 = six asciicircum + shiftr keycode 42 = asciicircum + shift shiftr keycode 42 = asciicircum + control keycode 42 = Control_asciicircum + alt keycode 42 = Meta_six +keycode 43 = seven ampersand braceleft + shiftr keycode 43 = ampersand + shift shiftr keycode 43 = ampersand + control keycode 43 = Control_underscore + alt keycode 43 = Meta_seven +keycode 44 = u + shiftr keycode 44 = +U + shift shiftr keycode 44 = +u +keycode 45 = j + shiftr keycode 45 = +J + shift shiftr keycode 45 = +j +keycode 46 = m + shiftr keycode 46 = +M + shift shiftr keycode 46 = +m +keycode 47 = n + shiftr keycode 47 = +N + shift shiftr keycode 47 = +n + +# This is the "Backspace" key: +keycode 49 = Delete Delete + shiftr keycode 49 = Delete + shift shiftr keycode 49 = Delete + control keycode 49 = BackSpace + alt keycode 49 = Meta_Delete +keycode 50 = Num_Lock + shift keycode 50 = Bare_Num_Lock + shiftr keycode 50 = Bare_Num_Lock + shift shiftr keycode 50 = Bare_Num_Lock +# This is the "Delete" key: +keycode 51 = Remove + control alt keycode 51 = Boot + +keycode 53 = backslash bar + shiftr keycode 53 = bar + shift shiftr keycode 53 = bar + control keycode 53 = Control_backslash + alt keycode 53 = Meta_backslash +keycode 54 = Return + alt keycode 54 = Meta_Control_m +keycode 55 = space space + shiftr keycode 55 = space + shift shiftr keycode 55 = space + control keycode 55 = nul + alt keycode 55 = Meta_space +keycode 56 = g + shiftr keycode 56 = +G + shift shiftr keycode 56 = +g +keycode 57 = t + shiftr keycode 57 = +T + shift shiftr keycode 57 = +t +keycode 58 = five percent + shiftr keycode 58 = percent + shift shiftr keycode 58 = percent + control keycode 58 = Control_bracketright + alt keycode 58 = Meta_five +keycode 59 = four dollar dollar + shiftr keycode 59 = dollar + shift shiftr keycode 59 = dollar + control keycode 59 = Control_backslash + alt keycode 59 = Meta_four +keycode 60 = r + shiftr keycode 60 = +R + shift shiftr keycode 60 = +r +keycode 61 = f + shiftr keycode 61 = +F + shift shiftr keycode 61 = +f + altgr keycode 61 = Hex_F +keycode 62 = v + shiftr keycode 62 = +V + shift shiftr keycode 62 = +v +keycode 63 = b + shiftr keycode 63 = +B + shift shiftr keycode 63 = +b + altgr keycode 63 = Hex_B + +keycode 67 = three numbersign + shiftr keycode 67 = numbersign + shift shiftr keycode 67 = numbersign + control keycode 67 = Escape + alt keycode 67 = Meta_three +keycode 68 = e + shiftr keycode 68 = +E + shift shiftr keycode 68 = +e + altgr keycode 68 = Hex_E +keycode 69 = d + shiftr keycode 69 = +D + shift shiftr keycode 69 = +d + altgr keycode 69 = Hex_D +keycode 70 = c + shiftr keycode 70 = +C + shift shiftr keycode 70 = +c + altgr keycode 70 = Hex_C +keycode 71 = Right Incr_Console + shiftr keycode 71 = Incr_Console + shift shiftr keycode 71 = Incr_Console + alt keycode 71 = End + +keycode 75 = two at at + shiftr keycode 75 = at + shift shiftr keycode 75 = at + control keycode 75 = nul + shift control keycode 75 = nul + shiftr control keycode 75 = nul + shift shiftr control keycode 75 = nul + alt keycode 75 = Meta_two +keycode 76 = w + shiftr keycode 76 = +W + shift shiftr keycode 76 = +w +keycode 77 = s + shiftr keycode 77 = +S + shift shiftr keycode 77 = +s +keycode 78 = x + shiftr keycode 78 = +X + shift shiftr keycode 78 = +x +keycode 79 = Down Scroll_Forward + shiftr keycode 79 = Scroll_Forward + shift shiftr keycode 79 = Scroll_Forward + alt keycode 79 = Next +keycode 80 = Escape Escape + shiftr keycode 80 = Escape + shift shiftr keycode 80 = Escape + alt keycode 80 = Meta_Escape +keycode 81 = Tab Tab + shiftr keycode 81 = Tab + shift shiftr keycode 81 = Tab + alt keycode 81 = Meta_Tab +keycode 82 = grave asciitilde + shiftr keycode 82 = asciitilde + shift shiftr keycode 82 = asciitilde + control keycode 82 = nul + alt keycode 82 = Meta_grave +keycode 83 = one exclam + shiftr keycode 83 = exclam + shift shiftr keycode 83 = exclam + alt keycode 83 = Meta_one +keycode 84 = q + shiftr keycode 84 = +Q + shift shiftr keycode 84 = +q +keycode 85 = a + shiftr keycode 85 = +A + shift shiftr keycode 85 = +a + altgr keycode 85 = Hex_A +keycode 86 = z + shiftr keycode 86 = +Z + shift shiftr keycode 86 = +z + +# This is the windows key: +keycode 88 = Decr_Console +keycode 89 = Shift +keycode 90 = Control +keycode 91 = Control +keycode 92 = Alt +keycode 93 = AltGr +keycode 94 = ShiftR + shift keycode 94 = Caps_Lock diff -Nur linux-2.4.32-rc1/drivers/char/indydog.c linux-2.4.32-rc1.mips/drivers/char/indydog.c --- linux-2.4.32-rc1/drivers/char/indydog.c 2003-08-25 13:44:41.000000000 +0200 +++ linux-2.4.32-rc1.mips/drivers/char/indydog.c 2004-06-22 17:32:07.000000000 +0200 @@ -1,5 +1,5 @@ /* - * IndyDog 0.2 A Hardware Watchdog Device for SGI IP22 + * IndyDog 0.3 A Hardware Watchdog Device for SGI IP22 * * (c) Copyright 2002 Guido Guenther , All Rights Reserved. * @@ -7,10 +7,10 @@ * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. - * + * * based on softdog.c by Alan Cox */ - + #include #include #include @@ -19,13 +19,12 @@ #include #include #include -#include #include #include #include -static unsigned long indydog_alive; -static int expect_close = 0; +#define PFX "indydog: " +static int indydog_alive; #ifdef CONFIG_WATCHDOG_NOWAYOUT static int nowayout = 1; @@ -33,10 +32,30 @@ static int nowayout = 0; #endif +#define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */ + MODULE_PARM(nowayout,"i"); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); -static inline void indydog_ping(void) +static void indydog_start(void) +{ + u32 mc_ctrl0 = sgimc->cpuctrl0; + + mc_ctrl0 = sgimc->cpuctrl0 | SGIMC_CCTRL0_WDOG; + sgimc->cpuctrl0 = mc_ctrl0; +} + +static void indydog_stop(void) +{ + u32 mc_ctrl0 = sgimc->cpuctrl0; + + mc_ctrl0 &= ~SGIMC_CCTRL0_WDOG; + sgimc->cpuctrl0 = mc_ctrl0; + + printk(KERN_INFO PFX "Stopped watchdog timer.\n"); +} + +static void indydog_ping(void) { sgimc->watchdogt = 0; } @@ -46,18 +65,14 @@ */ static int indydog_open(struct inode *inode, struct file *file) { - u32 mc_ctrl0; - - if (test_and_set_bit(0,&indydog_alive)) + if (indydog_alive) return -EBUSY; - if (nowayout) { + if (nowayout) MOD_INC_USE_COUNT; - } /* Activate timer */ - mc_ctrl0 = sgimc->cpuctrl0 | SGIMC_CCTRL0_WDOG; - sgimc->cpuctrl0 = mc_ctrl0; + indydog_start(); indydog_ping(); indydog_alive = 1; @@ -69,63 +84,48 @@ static int indydog_release(struct inode *inode, struct file *file) { /* Shut off the timer. - * Lock it in if it's a module and we set nowayout. */ - lock_kernel(); - if (expect_close) { - u32 mc_ctrl0 = sgimc->cpuctrl0; + * Lock it in if it's a module and we defined ...NOWAYOUT */ + if (!nowayout) { + u32 mc_ctrl0 = sgimc->cpuctrl0; mc_ctrl0 &= ~SGIMC_CCTRL0_WDOG; sgimc->cpuctrl0 = mc_ctrl0; printk(KERN_INFO "Stopped watchdog timer.\n"); - } else - printk(KERN_CRIT "WDT device closed unexpectedly. WDT will not stop!\n"); - clear_bit(0, &indydog_alive); - unlock_kernel(); + } + indydog_alive = 0; return 0; } static ssize_t indydog_write(struct file *file, const char *data, size_t len, loff_t *ppos) { - /* Can't seek (pwrite) on this device */ + /* Can't seek (pwrite) on this device */ if (ppos != &file->f_pos) return -ESPIPE; - /* - * Refresh the timer. - */ + /* Refresh the timer. */ if (len) { - if (!nowayout) { - size_t i; - - /* In case it was set long ago */ - expect_close = 0; - - for (i = 0; i != len; i++) { - char c; - if (get_user(c, data + i)) - return -EFAULT; - if (c == 'V') - expect_close = 1; - } - } indydog_ping(); - return 1; } - return 0; + return len; } static int indydog_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { + int options, retval = -EINVAL; static struct watchdog_info ident = { - options: WDIOF_MAGICCLOSE, - identity: "Hardware Watchdog for SGI IP22", + .options = WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, + .firmware_version = 0, + .identity = "Hardware Watchdog for SGI IP22", }; + switch (cmd) { default: return -ENOIOCTLCMD; case WDIOC_GETSUPPORT: - if(copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident))) + if (copy_to_user((struct watchdog_info *)arg, + &ident, sizeof(ident))) return -EFAULT; return 0; case WDIOC_GETSTATUS: @@ -134,31 +134,53 @@ case WDIOC_KEEPALIVE: indydog_ping(); return 0; + case WDIOC_GETTIMEOUT: + return put_user(WATCHDOG_TIMEOUT,(int *)arg); + case WDIOC_SETOPTIONS: + { + if (get_user(options, (int *)arg)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + indydog_stop(); + retval = 0; + } + + if (options & WDIOS_ENABLECARD) { + indydog_start(); + retval = 0; + } + + return retval; + } } } static struct file_operations indydog_fops = { - owner: THIS_MODULE, - write: indydog_write, - ioctl: indydog_ioctl, - open: indydog_open, - release: indydog_release, + .owner = THIS_MODULE, + .write = indydog_write, + .ioctl = indydog_ioctl, + .open = indydog_open, + .release = indydog_release, }; static struct miscdevice indydog_miscdev = { - minor: WATCHDOG_MINOR, - name: "watchdog", - fops: &indydog_fops, + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &indydog_fops, }; -static const char banner[] __initdata = KERN_INFO "Hardware Watchdog Timer for SGI IP22: 0.2\n"; +static char banner[] __initdata = + KERN_INFO PFX "Hardware Watchdog Timer for SGI IP22: 0.3\n"; static int __init watchdog_init(void) { int ret = misc_register(&indydog_miscdev); - - if (ret) + if (ret) { + printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); return ret; + } printk(banner); @@ -172,4 +194,7 @@ module_init(watchdog_init); module_exit(watchdog_exit); + +MODULE_AUTHOR("Guido Guenther "); +MODULE_DESCRIPTION("Hardware Watchdog Device for SGI IP22"); MODULE_LICENSE("GPL"); diff -Nur linux-2.4.32-rc1/drivers/char/ip27-rtc.c linux-2.4.32-rc1.mips/drivers/char/ip27-rtc.c --- linux-2.4.32-rc1/drivers/char/ip27-rtc.c 2004-02-18 14:36:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/char/ip27-rtc.c 2004-04-06 03:35:30.000000000 +0200 @@ -44,6 +44,7 @@ #include #include #include +#include static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg); @@ -209,11 +210,8 @@ static int __init rtc_init(void) { - nasid_t nid; - - nid = get_nasid(); rtc = (struct m48t35_rtc *) - (KL_CONFIG_CH_CONS_INFO(nid)->memory_base + IOC3_BYTEBUS_DEV0); + (KL_CONFIG_CH_CONS_INFO(master_nasid)->memory_base + IOC3_BYTEBUS_DEV0); printk(KERN_INFO "Real Time Clock Driver v%s\n", RTC_VERSION); if (misc_register(&rtc_dev)) { @@ -325,3 +323,7 @@ rtc_tm->tm_mon--; } + +MODULE_AUTHOR("Ralf Baechle "); +MODULE_DESCRIPTION("SGI IP27 M48T35 RTC driver"); +MODULE_LICENSE("GPL"); diff -Nur linux-2.4.32-rc1/drivers/char/Makefile linux-2.4.32-rc1.mips/drivers/char/Makefile --- linux-2.4.32-rc1/drivers/char/Makefile 2004-08-08 01:26:04.000000000 +0200 +++ linux-2.4.32-rc1.mips/drivers/char/Makefile 2005-02-11 22:09:56.000000000 +0100 @@ -48,7 +48,12 @@ KEYBD = endif ifeq ($(CONFIG_VR41XX_KIU),y) - KEYMAP = + ifeq ($(CONFIG_IBM_WORKPAD),y) + KEYMAP = ibm_workpad_keymap.o + endif + ifeq ($(CONFIG_VICTOR_MPC30X),y) + KEYMAP = victor_mpc30x_keymap.o + endif KEYBD = vr41xx_keyb.o endif endif @@ -251,7 +256,6 @@ obj-$(CONFIG_RTC) += rtc.o obj-$(CONFIG_GEN_RTC) += genrtc.o obj-$(CONFIG_EFI_RTC) += efirtc.o -obj-$(CONFIG_SGI_DS1286) += ds1286.o obj-$(CONFIG_MIPS_RTC) += mips_rtc.o obj-$(CONFIG_SGI_IP27_RTC) += ip27-rtc.o ifeq ($(CONFIG_PPC),) @@ -259,6 +263,7 @@ endif obj-$(CONFIG_TOSHIBA) += toshiba.o obj-$(CONFIG_I8K) += i8k.o +obj-$(CONFIG_DS1286) += ds1286.o obj-$(CONFIG_DS1620) += ds1620.o obj-$(CONFIG_DS1742) += ds1742.o obj-$(CONFIG_INTEL_RNG) += i810_rng.o @@ -269,6 +274,7 @@ obj-$(CONFIG_ITE_GPIO) += ite_gpio.o obj-$(CONFIG_AU1X00_GPIO) += au1000_gpio.o +obj-$(CONFIG_AU1550_PSC_SPI) += au1550_psc_spi.o obj-$(CONFIG_AU1X00_USB_TTY) += au1000_usbtty.o obj-$(CONFIG_AU1X00_USB_RAW) += au1000_usbraw.o obj-$(CONFIG_COBALT_LCD) += lcd.o @@ -353,3 +359,9 @@ qtronixmap.c: qtronixmap.map set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@ + +ibm_workpad_keymap.c: ibm_workpad_keymap.map + set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@ + +victor_mpc30x_keymap.c: victor_mpc30x_keymap.map + set -e ; loadkeys --mktable $< | sed -e 's/^static *//' > $@ diff -Nur linux-2.4.32-rc1/drivers/char/mips_rtc.c linux-2.4.32-rc1.mips/drivers/char/mips_rtc.c --- linux-2.4.32-rc1/drivers/char/mips_rtc.c 2004-01-05 14:53:56.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/char/mips_rtc.c 2004-06-28 14:54:53.000000000 +0200 @@ -53,14 +53,6 @@ #include #include #include - -/* - * Check machine - */ -#if !defined(CONFIG_MIPS) || !defined(CONFIG_NEW_TIME_C) -#error "This driver is for MIPS machines with CONFIG_NEW_TIME_C defined" -#endif - #include static unsigned long rtc_status = 0; /* bitmapped status byte. */ diff -Nur linux-2.4.32-rc1/drivers/char/sb1250_duart.c linux-2.4.32-rc1.mips/drivers/char/sb1250_duart.c --- linux-2.4.32-rc1/drivers/char/sb1250_duart.c 2004-02-18 14:36:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/char/sb1250_duart.c 2004-09-17 01:25:44.000000000 +0200 @@ -328,10 +328,11 @@ if (c <= 0) break; if (from_user) { + spin_unlock_irqrestore(&us->outp_lock, flags); if (copy_from_user(us->outp_buf + us->outp_tail, buf, c)) { - spin_unlock_irqrestore(&us->outp_lock, flags); return -EFAULT; } + spin_lock_irqsave(&us->outp_lock, flags); } else { memcpy(us->outp_buf + us->outp_tail, buf, c); } @@ -498,9 +499,31 @@ duart_set_cflag(us->line, tty->termios->c_cflag); } +static int get_serial_info(uart_state_t *us, struct serial_struct * retinfo) { + + struct serial_struct tmp; + + memset(&tmp, 0, sizeof(tmp)); + + tmp.type=PORT_SB1250; + tmp.line=us->line; + tmp.port=A_DUART_CHANREG(tmp.line,0); + tmp.irq=K_INT_UART_0 + tmp.line; + tmp.xmit_fifo_size=16; /* fixed by hw */ + tmp.baud_base=5000000; + tmp.io_type=SERIAL_IO_MEM; + + if (copy_to_user(retinfo,&tmp,sizeof(*retinfo))) + return -EFAULT; + + return 0; +} + static int duart_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg) { + uart_state_t *us = (uart_state_t *) tty->driver_data; + /* if (serial_paranoia_check(info, tty->device, "rs_ioctl")) return -ENODEV;*/ switch (cmd) { @@ -517,7 +540,7 @@ printk("Ignoring TIOCMSET\n"); break; case TIOCGSERIAL: - printk("Ignoring TIOCGSERIAL\n"); + return get_serial_info(us,(struct serial_struct *) arg); break; case TIOCSSERIAL: printk("Ignoring TIOCSSERIAL\n"); diff -Nur linux-2.4.32-rc1/drivers/char/serial.c linux-2.4.32-rc1.mips/drivers/char/serial.c --- linux-2.4.32-rc1/drivers/char/serial.c 2005-10-24 11:33:29.000000000 +0200 +++ linux-2.4.32-rc1.mips/drivers/char/serial.c 2005-09-23 22:41:22.000000000 +0200 @@ -62,6 +62,12 @@ * Robert Schwebel , * Juergen Beisert , * Theodore Ts'o + * + * 10/00: Added suport for MIPS Atlas board. + * 11/00: Hooks for serial kernel debug port support added. + * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, + * carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. */ static char *serial_version = "5.05c"; @@ -413,6 +419,22 @@ return 0; } +#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_SEAD) + +#include + +static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset) +{ + return (*(volatile unsigned int *)(mips_io_port_base + ATLAS_UART_REGS_BASE + offset*8) & 0xff); +} + +static _INLINE_ void serial_out(struct async_struct *info, int offset, int value) +{ + *(volatile unsigned int *)(mips_io_port_base + ATLAS_UART_REGS_BASE + offset*8) = value; +} + +#else + static _INLINE_ unsigned int serial_in(struct async_struct *info, int offset) { switch (info->io_type) { @@ -447,6 +469,8 @@ outb(value, info->port+offset); } } +#endif + /* * We used to support using pause I/O for certain machines. We diff -Nur linux-2.4.32-rc1/drivers/char/victor_mpc30x_keymap.map linux-2.4.32-rc1.mips/drivers/char/victor_mpc30x_keymap.map --- linux-2.4.32-rc1/drivers/char/victor_mpc30x_keymap.map 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/char/victor_mpc30x_keymap.map 2004-02-05 18:04:42.000000000 +0100 @@ -0,0 +1,102 @@ +# Victor Interlink MP-C303/304 keyboard keymap +# +# Copyright (C) 2003 Yoichi Yuasa +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +keymaps 0-1,4-5,8-9,12 +alt_is_meta +strings as usual +compose as usual for "iso-8859-1" + +# First line +keycode 89 = Escape +keycode 9 = Delete + +# 2nd line +keycode 73 = one exclam +keycode 18 = two quotedbl +keycode 92 = three numbersign + control keycode 92 = Escape +keycode 53 = four dollar + control keycode 53 = Control_backslash +keycode 21 = five percent + control keycode 21 = Control_bracketright +keycode 50 = six ampersand + control keycode 50 = Control_underscore +keycode 48 = seven apostrophe +keycode 51 = eight parenleft +keycode 16 = nine parenright +keycode 80 = zero asciitilde + control keycode 80 = nul +keycode 49 = minus equal +keycode 30 = asciicircum asciitilde + control keycode 30 = Control_asciicircum +keycode 5 = backslash bar + control keycode 5 = Control_backslash +keycode 13 = BackSpace +# 3rd line +keycode 57 = Tab +keycode 74 = q +keycode 26 = w +keycode 81 = e +keycode 29 = r +keycode 37 = t +keycode 45 = y +keycode 72 = u +keycode 24 = i +keycode 32 = o +keycode 41 = p +keycode 1 = at grave + control keycode 1 = nul +keycode 54 = bracketleft braceleft +keycode 63 = Return + alt keycode 63 = Meta_Control_m +# 4th line +keycode 23 = Caps_Lock +keycode 34 = a +keycode 66 = s +keycode 52 = d +keycode 20 = f +keycode 84 = g +keycode 67 = h +keycode 64 = j +keycode 17 = k +keycode 83 = l +keycode 22 = semicolon plus +keycode 61 = colon asterisk + control keycode 61 = Control_g +keycode 65 = bracketright braceright + control keycode 65 = Control_bracketright +# 5th line +keycode 91 = Shift +keycode 76 = z +keycode 68 = x +keycode 28 = c +keycode 36 = v +keycode 44 = b +keycode 19 = n +keycode 27 = m +keycode 35 = comma less +keycode 3 = period greater + control keycode 3 = Compose +keycode 38 = slash question + control keycode 38 = Delete + shift control keycode 38 = Delete +keycode 6 = backslash underscore + control keycode 6 = Control_backslash +keycode 55 = Up + alt keycode 55 = PageUp +keycode 14 = Shift +# 6th line +keycode 56 = Control +keycode 42 = Alt +keycode 33 = space + control keycode 33 = nul +keycode 7 = Left + alt keycode 7 = Home +keycode 31 = Down + alt keycode 31 = PageDown +keycode 47 = Right + alt keycode 47 = End diff -Nur linux-2.4.32-rc1/drivers/char/vr41xx_keyb.c linux-2.4.32-rc1.mips/drivers/char/vr41xx_keyb.c --- linux-2.4.32-rc1/drivers/char/vr41xx_keyb.c 2004-02-18 14:36:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/char/vr41xx_keyb.c 2004-02-17 13:08:55.000000000 +0100 @@ -308,7 +308,7 @@ if (found != 0) { kiu_base = VRC4173_KIU_OFFSET; mkiuintreg = VRC4173_MKIUINTREG_OFFSET; - vrc4173_clock_supply(VRC4173_KIU_CLOCK); + vrc4173_supply_clock(VRC4173_KIU_CLOCK); } } #endif @@ -325,7 +325,7 @@ if (current_cpu_data.cputype == CPU_VR4111 || current_cpu_data.cputype == CPU_VR4121) - vr41xx_clock_supply(KIU_CLOCK); + vr41xx_supply_clock(KIU_CLOCK); kiu_writew(KIURST_KIURST, KIURST); diff -Nur linux-2.4.32-rc1/drivers/i2c/Config.in linux-2.4.32-rc1.mips/drivers/i2c/Config.in --- linux-2.4.32-rc1/drivers/i2c/Config.in 2004-04-14 15:05:29.000000000 +0200 +++ linux-2.4.32-rc1.mips/drivers/i2c/Config.in 2005-02-11 20:49:04.000000000 +0100 @@ -57,6 +57,10 @@ if [ "$CONFIG_SGI_IP22" = "y" ]; then dep_tristate 'I2C SGI interfaces' CONFIG_I2C_ALGO_SGI $CONFIG_I2C fi + + if [ "$CONFIG_SOC_AU1550" = "y" -o "$CONFIG_SOC_AU1200" ]; then + dep_tristate 'Au1550/Au1200 SMBus interface' CONFIG_I2C_ALGO_AU1550 $CONFIG_I2C + fi # This is needed for automatic patch generation: sensors code starts here # This is needed for automatic patch generation: sensors code ends here diff -Nur linux-2.4.32-rc1/drivers/i2c/i2c-algo-au1550.c linux-2.4.32-rc1.mips/drivers/i2c/i2c-algo-au1550.c --- linux-2.4.32-rc1/drivers/i2c/i2c-algo-au1550.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/i2c/i2c-algo-au1550.c 2005-02-11 20:49:04.000000000 +0100 @@ -0,0 +1,340 @@ +/* + * i2c-algo-au1550.c: SMBus (i2c) driver algorithms for Alchemy PSC interface + * Copyright (C) 2004 Embedded Edge, LLC + * + * The documentation describes this as an SMBus controller, but it doesn't + * understand any of the SMBus protocol in hardware. It's really an I2C + * controller that could emulate most of the SMBus in software. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +static int +wait_xfer_done(struct i2c_algo_au1550_data *adap) +{ + u32 stat; + int i; + volatile psc_smb_t *sp; + + sp = (volatile psc_smb_t *)(adap->psc_base); + + /* Wait for Tx FIFO Underflow. + */ + for (i = 0; i < adap->xfer_timeout; i++) { + stat = sp->psc_smbevnt; + au_sync(); + if ((stat & PSC_SMBEVNT_TU) != 0) { + /* Clear it. */ + sp->psc_smbevnt = PSC_SMBEVNT_TU; + au_sync(); + return 0; + } + udelay(1); + } + + return -ETIMEDOUT; +} + +static int +wait_ack(struct i2c_algo_au1550_data *adap) +{ + u32 stat; + volatile psc_smb_t *sp; + + if (wait_xfer_done(adap)) + return -ETIMEDOUT; + + sp = (volatile psc_smb_t *)(adap->psc_base); + + stat = sp->psc_smbevnt; + au_sync(); + + if ((stat & (PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | PSC_SMBEVNT_AL)) != 0) + return -ETIMEDOUT; + + return 0; +} + +static int +wait_master_done(struct i2c_algo_au1550_data *adap) +{ + u32 stat; + int i; + volatile psc_smb_t *sp; + + sp = (volatile psc_smb_t *)(adap->psc_base); + + /* Wait for Master Done. + */ + for (i = 0; i < adap->xfer_timeout; i++) { + stat = sp->psc_smbevnt; + au_sync(); + if ((stat & PSC_SMBEVNT_MD) != 0) + return 0; + udelay(1); + } + + return -ETIMEDOUT; +} + +static int +do_address(struct i2c_algo_au1550_data *adap, unsigned int addr, int rd) +{ + volatile psc_smb_t *sp; + u32 stat; + + sp = (volatile psc_smb_t *)(adap->psc_base); + + /* Reset the FIFOs, clear events. + */ + sp->psc_smbpcr = PSC_SMBPCR_DC; + sp->psc_smbevnt = PSC_SMBEVNT_ALLCLR; + au_sync(); + do { + stat = sp->psc_smbpcr; + au_sync(); + } while ((stat & PSC_SMBPCR_DC) != 0); + + /* Write out the i2c chip address and specify operation + */ + addr <<= 1; + if (rd) + addr |= 1; + + /* Put byte into fifo, start up master. + */ + sp->psc_smbtxrx = addr; + au_sync(); + sp->psc_smbpcr = PSC_SMBPCR_MS; + au_sync(); + if (wait_ack(adap)) + return -EIO; + return 0; +} + +static u32 +wait_for_rx_byte(struct i2c_algo_au1550_data *adap, u32 *ret_data) +{ + int j; + u32 data, stat; + volatile psc_smb_t *sp; + + if (wait_xfer_done(adap)) + return -EIO; + + sp = (volatile psc_smb_t *)(adap->psc_base); + + j = adap->xfer_timeout * 100; + do { + j--; + if (j <= 0) + return -EIO; + + stat = sp->psc_smbstat; + au_sync(); + if ((stat & PSC_SMBSTAT_RE) == 0) + j = 0; + else + udelay(1); + } while (j > 0); + data = sp->psc_smbtxrx; + au_sync(); + *ret_data = data; + + return 0; +} + +static int +i2c_read(struct i2c_algo_au1550_data *adap, unsigned char *buf, + unsigned int len) +{ + int i; + u32 data; + volatile psc_smb_t *sp; + + if (len == 0) + return 0; + + /* A read is performed by stuffing the transmit fifo with + * zero bytes for timing, waiting for bytes to appear in the + * receive fifo, then reading the bytes. + */ + + sp = (volatile psc_smb_t *)(adap->psc_base); + + i = 0; + while (i < (len-1)) { + sp->psc_smbtxrx = 0; + au_sync(); + if (wait_for_rx_byte(adap, &data)) + return -EIO; + + buf[i] = data; + i++; + } + + /* The last byte has to indicate transfer done. + */ + sp->psc_smbtxrx = PSC_SMBTXRX_STP; + au_sync(); + if (wait_master_done(adap)) + return -EIO; + + data = sp->psc_smbtxrx; + au_sync(); + buf[i] = data; + return 0; +} + +static int +i2c_write(struct i2c_algo_au1550_data *adap, unsigned char *buf, + unsigned int len) +{ + int i; + u32 data; + volatile psc_smb_t *sp; + + if (len == 0) + return 0; + + sp = (volatile psc_smb_t *)(adap->psc_base); + + i = 0; + while (i < (len-1)) { + data = buf[i]; + sp->psc_smbtxrx = data; + au_sync(); + if (wait_ack(adap)) + return -EIO; + i++; + } + + /* The last byte has to indicate transfer done. + */ + data = buf[i]; + data |= PSC_SMBTXRX_STP; + sp->psc_smbtxrx = data; + au_sync(); + if (wait_master_done(adap)) + return -EIO; + return 0; +} + +static int +au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num) +{ + struct i2c_algo_au1550_data *adap = i2c_adap->algo_data; + struct i2c_msg *p; + int i, err = 0; + + for (i = 0; !err && i < num; i++) { + p = &msgs[i]; + err = do_address(adap, p->addr, p->flags & I2C_M_RD); + if (err || !p->len) + continue; + if (p->flags & I2C_M_RD) + err = i2c_read(adap, p->buf, p->len); + else + err = i2c_write(adap, p->buf, p->len); + } + + /* Return the number of messages processed, or the error code. + */ + if (err == 0) + err = num; + return err; +} + +static u32 +au1550_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm au1550_algo = { + .name = "Au1550 algorithm", + .id = I2C_ALGO_AU1550, + .master_xfer = au1550_xfer, + .functionality = au1550_func, +}; + +/* + * registering functions to load algorithms at runtime + * Prior to calling us, the 50MHz clock frequency and routing + * must have been set up for the PSC indicated by the adapter. + */ +int +i2c_au1550_add_bus(struct i2c_adapter *i2c_adap) +{ + struct i2c_algo_au1550_data *adap = i2c_adap->algo_data; + volatile psc_smb_t *sp; + u32 stat; + + i2c_adap->algo = &au1550_algo; + + /* Now, set up the PSC for SMBus PIO mode. + */ + sp = (volatile psc_smb_t *)(adap->psc_base); + sp->psc_ctrl = PSC_CTRL_DISABLE; + au_sync(); + sp->psc_sel = PSC_SEL_PS_SMBUSMODE; + sp->psc_smbcfg = 0; + au_sync(); + sp->psc_ctrl = PSC_CTRL_ENABLE; + au_sync(); + do { + stat = sp->psc_smbstat; + au_sync(); + } while ((stat & PSC_SMBSTAT_SR) == 0); + + sp->psc_smbcfg = (PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 | + PSC_SMBCFG_DD_DISABLE); + + /* Divide by 8 to get a 6.25 MHz clock. The later protocol + * timings are based on this clock. + */ + sp->psc_smbcfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV2); + sp->psc_smbmsk = PSC_SMBMSK_ALLMASK; + au_sync(); + + /* Set the protocol timer values. See Table 71 in the + * Au1550 Data Book for standard timing values. + */ + sp->psc_smbtmr = PSC_SMBTMR_SET_TH(2) | PSC_SMBTMR_SET_PS(15) | \ + PSC_SMBTMR_SET_PU(11) | PSC_SMBTMR_SET_SH(11) | \ + PSC_SMBTMR_SET_SU(11) | PSC_SMBTMR_SET_CL(15) | \ + PSC_SMBTMR_SET_CH(11); + au_sync(); + + sp->psc_smbcfg |= PSC_SMBCFG_DE_ENABLE; + do { + stat = sp->psc_smbstat; + au_sync(); + } while ((stat & PSC_SMBSTAT_DR) == 0); + + return i2c_add_adapter(i2c_adap); +} + + +int +i2c_au1550_del_bus(struct i2c_adapter *adap) +{ + return i2c_del_adapter(adap); +} + +EXPORT_SYMBOL(i2c_au1550_add_bus); +EXPORT_SYMBOL(i2c_au1550_del_bus); + +MODULE_AUTHOR("Dan Malek "); +MODULE_DESCRIPTION("SMBus Au1550 algorithm"); +MODULE_LICENSE("GPL"); diff -Nur linux-2.4.32-rc1/drivers/i2c/i2c-au1550.c linux-2.4.32-rc1.mips/drivers/i2c/i2c-au1550.c --- linux-2.4.32-rc1/drivers/i2c/i2c-au1550.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/i2c/i2c-au1550.c 2005-02-11 20:49:04.000000000 +0100 @@ -0,0 +1,154 @@ +/* + * i2c-au1550.c: SMBus (i2c) adapter for Alchemy PSC interface + * Copyright (C) 2004 Embedded Edge, LLC + * + * This is just a skeleton adapter to use with the Au1550 PSC + * algorithm. It was developed for the Pb1550, but will work with + * any Au1550 board that has a similar PSC configuration. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include + +#include +#include +#if defined( CONFIG_MIPS_PB1550 ) + #include +#endif +#if defined( CONFIG_MIPS_PB1200 ) + #include +#endif +#if defined( CONFIG_MIPS_DB1200 ) + #include +#endif +#if defined( CONFIG_MIPS_FICMMP ) + #include +#endif + +#include +#include + + + +static int +pb1550_reg(struct i2c_client *client) +{ + return 0; +} + +static int +pb1550_unreg(struct i2c_client *client) +{ + return 0; +} + +static void +pb1550_inc_use(struct i2c_adapter *adap) +{ +#ifdef MODULE + MOD_INC_USE_COUNT; +#endif +} + +static void +pb1550_dec_use(struct i2c_adapter *adap) +{ +#ifdef MODULE + MOD_DEC_USE_COUNT; +#endif +} + +static struct i2c_algo_au1550_data pb1550_i2c_info = { + SMBUS_PSC_BASE, 200, 200 +}; + +static struct i2c_adapter pb1550_board_adapter = { + name: "pb1550 adapter", + id: I2C_HW_AU1550_PSC, + algo: NULL, + algo_data: &pb1550_i2c_info, + inc_use: pb1550_inc_use, + dec_use: pb1550_dec_use, + client_register: pb1550_reg, + client_unregister: pb1550_unreg, + client_count: 0, +}; + +int __init +i2c_pb1550_init(void) +{ + /* This is where we would set up a 50MHz clock source + * and routing. On the Pb1550, the SMBus is PSC2, which + * uses a shared clock with USB. This has been already + * configured by Yamon as a 48MHz clock, close enough + * for our work. + */ + if (i2c_au1550_add_bus(&pb1550_board_adapter) < 0) + return -ENODEV; + + return 0; +} + +/* BIG hack to support the control interface on the Wolfson WM8731 + * audio codec on the Pb1550 board. We get an address and two data + * bytes to write, create an i2c message, and send it across the + * i2c transfer function. We do this here because we have access to + * the i2c adapter structure. + */ +static struct i2c_msg wm_i2c_msg; /* We don't want this stuff on the stack */ +static u8 i2cbuf[2]; + +int +pb1550_wm_codec_write(u8 addr, u8 reg, u8 val) +{ + wm_i2c_msg.addr = addr; + wm_i2c_msg.flags = 0; + wm_i2c_msg.buf = i2cbuf; + wm_i2c_msg.len = 2; + i2cbuf[0] = reg; + i2cbuf[1] = val; + + return pb1550_board_adapter.algo->master_xfer(&pb1550_board_adapter, &wm_i2c_msg, 1); +} + +/* the next function is needed by DVB driver. */ +int pb1550_i2c_xfer(struct i2c_msg msgs[], int num) +{ + return pb1550_board_adapter.algo->master_xfer(&pb1550_board_adapter, msgs, num); +} + +EXPORT_SYMBOL(pb1550_wm_codec_write); +EXPORT_SYMBOL(pb1550_i2c_xfer); + +MODULE_AUTHOR("Dan Malek, Embedded Edge, LLC."); +MODULE_DESCRIPTION("SMBus adapter Alchemy pb1550"); +MODULE_LICENSE("GPL"); + +int +init_module(void) +{ + return i2c_pb1550_init(); +} + +void +cleanup_module(void) +{ + i2c_au1550_del_bus(&pb1550_board_adapter); +} diff -Nur linux-2.4.32-rc1/drivers/i2c/i2c-core.c linux-2.4.32-rc1.mips/drivers/i2c/i2c-core.c --- linux-2.4.32-rc1/drivers/i2c/i2c-core.c 2005-06-01 02:56:56.000000000 +0200 +++ linux-2.4.32-rc1.mips/drivers/i2c/i2c-core.c 2005-05-23 14:12:30.000000000 +0200 @@ -1280,6 +1280,9 @@ #ifdef CONFIG_I2C_MAX1617 extern int i2c_max1617_init(void); #endif +#ifdef CONFIG_I2C_ALGO_AU1550 + extern int i2c_pb1550_init(void); +#endif #ifdef CONFIG_I2C_PROC extern int sensors_init(void); @@ -1335,6 +1338,10 @@ i2c_max1617_init(); #endif +#ifdef CONFIG_I2C_ALGO_AU1550 + i2c_pb1550_init(); +#endif + /* -------------- proc interface ---- */ #ifdef CONFIG_I2C_PROC sensors_init(); diff -Nur linux-2.4.32-rc1/drivers/i2c/Makefile linux-2.4.32-rc1.mips/drivers/i2c/Makefile --- linux-2.4.32-rc1/drivers/i2c/Makefile 2004-02-18 14:36:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/i2c/Makefile 2005-02-11 20:49:04.000000000 +0100 @@ -6,7 +6,7 @@ export-objs := i2c-core.o i2c-algo-bit.o i2c-algo-pcf.o \ i2c-algo-ite.o i2c-algo-sibyte.o i2c-algo-sgi.o \ - i2c-proc.o + i2c-algo-au1550.o i2c-proc.o i2c-au1550.o obj-$(CONFIG_I2C) += i2c-core.o obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o @@ -25,6 +25,7 @@ obj-$(CONFIG_I2C_ALGO_SIBYTE) += i2c-algo-sibyte.o i2c-sibyte.o obj-$(CONFIG_I2C_MAX1617) += i2c-max1617.o obj-$(CONFIG_I2C_ALGO_SGI) += i2c-algo-sgi.o +obj-$(CONFIG_I2C_ALGO_AU1550) += i2c-algo-au1550.o i2c-au1550.o # This is needed for automatic patch generation: sensors code starts here # This is needed for automatic patch generation: sensors code ends here diff -Nur linux-2.4.32-rc1/drivers/media/video/indycam.c linux-2.4.32-rc1.mips/drivers/media/video/indycam.c --- linux-2.4.32-rc1/drivers/media/video/indycam.c 2004-02-18 14:36:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/media/video/indycam.c 2004-12-09 21:32:05.000000000 +0100 @@ -50,13 +50,14 @@ 0x80, /* INDYCAM_GAMMA */ }; - int err = 0; struct indycam *camera; struct i2c_client *client; + int err = 0; client = kmalloc(sizeof(*client), GFP_KERNEL); - if (!client) + if (!client) return -ENOMEM; + camera = kmalloc(sizeof(*camera), GFP_KERNEL); if (!camera) { err = -ENOMEM; @@ -67,7 +68,7 @@ client->adapter = adap; client->addr = addr; client->driver = &i2c_driver_indycam; - strcpy(client->name, "IndyCam client"); + strcpy(client->name, "IndyCam client"); camera->client = client; err = i2c_attach_client(client); @@ -75,18 +76,18 @@ goto out_free_camera; camera->version = i2c_smbus_read_byte_data(client, INDYCAM_VERSION); - if (camera->version != CAMERA_VERSION_INDY && - camera->version != CAMERA_VERSION_MOOSE) { + if ((camera->version != CAMERA_VERSION_INDY) && + (camera->version != CAMERA_VERSION_MOOSE)) { err = -ENODEV; goto out_detach_client; } - printk(KERN_INFO "Indycam v%d.%d detected.\n", + printk(KERN_INFO "IndyCam v%d.%d detected.\n", INDYCAM_VERSION_MAJOR(camera->version), INDYCAM_VERSION_MINOR(camera->version)); err = i2c_master_send(client, initseq, sizeof(initseq)); if (err) - printk(KERN_INFO "IndyCam initalization failed\n"); + printk(KERN_ERR "IndyCam initalization failed.\n"); MOD_INC_USE_COUNT; return 0; diff -Nur linux-2.4.32-rc1/drivers/media/video/vino.c linux-2.4.32-rc1.mips/drivers/media/video/vino.c --- linux-2.4.32-rc1/drivers/media/video/vino.c 2004-02-18 14:36:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/media/video/vino.c 2004-12-10 05:02:54.000000000 +0100 @@ -5,6 +5,8 @@ * License version 2 as published by the Free Software Foundation. * * Copyright (C) 2003 Ladislav Michl + * Copyright (C) 2004 Mikael Nousiainen + * */ #include @@ -37,13 +39,23 @@ #define DEBUG(x...) #endif +/* Channels (who could have guessed) */ +#define VINO_CHAN_NONE 0 +#define VINO_CHAN_A 1 +#define VINO_CHAN_B 2 + /* VINO video size */ #define VINO_PAL_WIDTH 768 #define VINO_PAL_HEIGHT 576 #define VINO_NTSC_WIDTH 646 #define VINO_NTSC_HEIGHT 486 -/* set this to some sensible values. note: VINO_MIN_WIDTH has to be 8*x */ +/* Minimum value for Y-clipping (for smaller values the images + * will be corrupted) */ +#define VINO_MIN_Y_CLIPPING 2 + +/* Set these to some sensible values. + * Note: the picture width has to be divisible by 8 */ #define VINO_MIN_WIDTH 32 #define VINO_MIN_HEIGHT 32 @@ -64,9 +76,7 @@ struct vino_device { struct video_device vdev; -#define VINO_CHAN_A 1 -#define VINO_CHAN_B 2 - int chan; + int chan; /* VINO_CHAN_NONE, VINO_CHAN_A or VINO_CHAN_B */ int alpha; /* clipping... */ unsigned int left, right, top, bottom; @@ -106,7 +116,7 @@ struct vino_client { struct i2c_client *driver; - int owner; + int owner; /* VINO_CHAN_NONE, VINO_CHAN_A or VINO_CHAN_B */ }; struct vino_video { @@ -362,6 +372,7 @@ static int dma_setup(struct vino_device *v) { u32 ctrl, intr; + int ofs; struct sgi_vino_channel *ch; ch = (v->chan == VINO_CHAN_A) ? &vino->a : &vino->b; @@ -377,14 +388,24 @@ ch->line_size = v->line_size - 8; /* set the alpha register */ ch->alpha = v->alpha; - /* set cliping registers */ - ch->clip_start = VINO_CLIP_ODD(v->top) | VINO_CLIP_EVEN(v->top+1) | + /* Set the clipping registers, this is the constant source of fun :) + * Y clipping start has to be >= 2 and end has to be start + height/2 + * The values of top and bottom are even so dividing is not a problem + * + * The docs say that clipping values for the even field should be + * odd_end + something_to_skip_vertical_blanking + some_lines and + * even_start + height/2, though the image is good this way also + * + * TODO: for analog sources (SAA7191), the clipping values are a bit + * different and that case isn't yet handled + */ + ofs = VINO_MIN_Y_CLIPPING; /* Should depend on input source */ + ch->clip_start = VINO_CLIP_ODD(ofs + v->top / 2) | + VINO_CLIP_EVEN(ofs + v->top / 2 + 1) | VINO_CLIP_X(v->left); - ch->clip_end = VINO_CLIP_ODD(v->bottom) | VINO_CLIP_EVEN(v->bottom+1) | + ch->clip_end = VINO_CLIP_ODD(ofs + v->bottom / 2 - 1) | + VINO_CLIP_EVEN(ofs + v->bottom / 2) | VINO_CLIP_X(v->right); - /* FIXME: end-of-field bug workaround - VINO_CLIP_X(VINO_PAL_WIDTH); - */ /* init the frame rate and norm (full frame rate only for now...) */ ch->frame_rate = VINO_FRAMERT_RT(0x1fff) | (get_capture_norm(v) == VIDEO_MODE_PAL ? @@ -510,6 +531,7 @@ static void vino_interrupt(int irq, void *dev_id, struct pt_regs *regs) { u32 intr, ctrl; + int a_eof, b_eof; spin_lock(&Vino->vino_lock); ctrl = vino->control; @@ -525,12 +547,14 @@ vino->control = ctrl; clear_eod(&Vino->chB); } + a_eof = intr & VINO_INTSTAT_A_EOF; + b_eof = intr & VINO_INTSTAT_B_EOF; vino->intr_status = ~intr; spin_unlock(&Vino->vino_lock); - /* FIXME: For now we are assuming that interrupt means that frame is - * done. That's not true, but we can live with such brokeness for - * a while ;-) */ - field_done(&Vino->chA); + if (a_eof) + field_done(&Vino->chA); + if (b_eof) + field_done(&Vino->chB); } static int vino_grab(struct vino_device *v, int frame) diff -Nur linux-2.4.32-rc1/drivers/mtd/devices/docprobe.c linux-2.4.32-rc1.mips/drivers/mtd/devices/docprobe.c --- linux-2.4.32-rc1/drivers/mtd/devices/docprobe.c 2003-06-13 16:51:34.000000000 +0200 +++ linux-2.4.32-rc1.mips/drivers/mtd/devices/docprobe.c 2003-06-16 01:42:21.000000000 +0200 @@ -89,10 +89,10 @@ 0xe4000000, #elif defined(CONFIG_MOMENCO_OCELOT) 0x2f000000, - 0xff000000, + 0xff000000, #elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C) - 0xff000000, -##else + 0xff000000, +#else #warning Unknown architecture for DiskOnChip. No default probe locations defined #endif 0 }; diff -Nur linux-2.4.32-rc1/drivers/mtd/devices/ms02-nv.c linux-2.4.32-rc1.mips/drivers/mtd/devices/ms02-nv.c --- linux-2.4.32-rc1/drivers/mtd/devices/ms02-nv.c 2003-06-13 16:51:34.000000000 +0200 +++ linux-2.4.32-rc1.mips/drivers/mtd/devices/ms02-nv.c 2004-07-30 12:22:40.000000000 +0200 @@ -1,10 +1,10 @@ /* - * Copyright (c) 2001 Maciej W. Rozycki + * Copyright (c) 2001 Maciej W. Rozycki * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. * * $Id: ms02-nv.c,v 1.2 2003/01/24 14:05:17 dwmw2 Exp $ */ @@ -29,18 +29,18 @@ static char version[] __initdata = - "ms02-nv.c: v.1.0.0 13 Aug 2001 Maciej W. Rozycki.\n"; + "ms02-nv.c: v.1.0.0 13 Aug 2001 Maciej W. Rozycki.\n"; -MODULE_AUTHOR("Maciej W. Rozycki "); +MODULE_AUTHOR("Maciej W. Rozycki "); MODULE_DESCRIPTION("DEC MS02-NV NVRAM module driver"); MODULE_LICENSE("GPL"); /* * Addresses we probe for an MS02-NV at. Modules may be located - * at any 8MB boundary within a 0MB up to 112MB range or at any 32MB - * boundary within a 0MB up to 448MB range. We don't support a module - * at 0MB, though. + * at any 8MiB boundary within a 0MiB up to 112MiB range or at any 32MiB + * boundary within a 0MiB up to 448MiB range. We don't support a module + * at 0MiB, though. */ static ulong ms02nv_addrs[] __initdata = { 0x07000000, 0x06800000, 0x06000000, 0x05800000, 0x05000000, @@ -130,7 +130,7 @@ int ret = -ENODEV; - /* The module decodes 8MB of address space. */ + /* The module decodes 8MiB of address space. */ mod_res = kmalloc(sizeof(*mod_res), GFP_KERNEL); if (!mod_res) return -ENOMEM; @@ -233,7 +233,7 @@ goto err_out_csr_res; } - printk(KERN_INFO "mtd%d: %s at 0x%08lx, size %uMB.\n", + printk(KERN_INFO "mtd%d: %s at 0x%08lx, size %uMiB.\n", mtd->index, ms02nv_name, addr, size >> 20); mp->next = root_ms02nv_mtd; @@ -293,12 +293,12 @@ switch (mips_machtype) { case MACH_DS5000_200: - csr = (volatile u32 *)KN02_CSR_ADDR; + csr = (volatile u32 *)KN02_CSR_BASE; if (*csr & KN02_CSR_BNK32M) stride = 2; break; case MACH_DS5000_2X0: - case MACH_DS5000: + case MACH_DS5900: csr = (volatile u32 *)KN03_MCR_BASE; if (*csr & KN03_MCR_BNK32M) stride = 2; diff -Nur linux-2.4.32-rc1/drivers/mtd/devices/ms02-nv.h linux-2.4.32-rc1.mips/drivers/mtd/devices/ms02-nv.h --- linux-2.4.32-rc1/drivers/mtd/devices/ms02-nv.h 2002-11-29 00:53:13.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/mtd/devices/ms02-nv.h 2004-07-30 12:22:40.000000000 +0200 @@ -1,32 +1,96 @@ /* - * Copyright (c) 2001 Maciej W. Rozycki + * Copyright (c) 2001, 2003 Maciej W. Rozycki * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. + * DEC MS02-NV (54-20948-01) battery backed-up NVRAM module for + * DECstation/DECsystem 5000/2x0 and DECsystem 5900 and 5900/260 + * systems. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * $Id: ms02-nv.h,v 1.3 2003/08/19 09:25:36 dwmw2 Exp $ */ #include #include +/* + * Addresses are decoded as follows: + * + * 0x000000 - 0x3fffff SRAM + * 0x400000 - 0x7fffff CSR + * + * Within the SRAM area the following ranges are forced by the system + * firmware: + * + * 0x000000 - 0x0003ff diagnostic area, destroyed upon a reboot + * 0x000400 - ENDofRAM storage area, available to operating systems + * + * but we can't really use the available area right from 0x000400 as + * the first word is used by the firmware as a status flag passed + * from an operating system. If anything but the valid data magic + * ID value is found, the firmware considers the SRAM clean, i.e. + * containing no valid data, and disables the battery resulting in + * data being erased as soon as power is switched off. So the choice + * for the start address of the user-available is 0x001000 which is + * nicely page aligned. The area between 0x000404 and 0x000fff may + * be used by the driver for own needs. + * + * The diagnostic area defines two status words to be read by an + * operating system, a magic ID to distinguish a MS02-NV board from + * anything else and a status information providing results of tests + * as well as the size of SRAM available, which can be 1MiB or 2MiB + * (that's what the firmware handles; no idea if 2MiB modules ever + * existed). + * + * The firmware only handles the MS02-NV board if installed in the + * last (15th) slot, so for any other location the status information + * stored in the SRAM cannot be relied upon. But from the hardware + * point of view there is no problem using up to 14 such boards in a + * system -- only the 1st slot needs to be filled with a DRAM module. + * The MS02-NV board is ECC-protected, like other MS02 memory boards. + * + * The state of the battery as provided by the CSR is reflected on + * the two onboard LEDs. When facing the battery side of the board, + * with the LEDs at the top left and the battery at the bottom right + * (i.e. looking from the back side of the system box), their meaning + * is as follows (the system has to be powered on): + * + * left LED battery disable status: lit = enabled + * right LED battery condition status: lit = OK + */ + /* MS02-NV iomem register offsets. */ #define MS02NV_CSR 0x400000 /* control & status register */ +/* MS02-NV CSR status bits. */ +#define MS02NV_CSR_BATT_OK 0x01 /* battery OK */ +#define MS02NV_CSR_BATT_OFF 0x02 /* battery disabled */ + + /* MS02-NV memory offsets. */ #define MS02NV_DIAG 0x0003f8 /* diagnostic status */ #define MS02NV_MAGIC 0x0003fc /* MS02-NV magic ID */ -#define MS02NV_RAM 0x000400 /* general-purpose RAM start */ +#define MS02NV_VALID 0x000400 /* valid data magic ID */ +#define MS02NV_RAM 0x001000 /* user-exposed RAM start */ -/* MS02-NV diagnostic status constants. */ -#define MS02NV_DIAG_SIZE_MASK 0xf0 /* RAM size mask */ -#define MS02NV_DIAG_SIZE_SHIFT 0x10 /* RAM size shift (left) */ +/* MS02-NV diagnostic status bits. */ +#define MS02NV_DIAG_TEST 0x01 /* SRAM test done (?) */ +#define MS02NV_DIAG_RO 0x02 /* SRAM r/o test done */ +#define MS02NV_DIAG_RW 0x04 /* SRAM r/w test done */ +#define MS02NV_DIAG_FAIL 0x08 /* SRAM test failed */ +#define MS02NV_DIAG_SIZE_MASK 0xf0 /* SRAM size mask */ +#define MS02NV_DIAG_SIZE_SHIFT 0x10 /* SRAM size shift (left) */ /* MS02-NV general constants. */ #define MS02NV_ID 0x03021966 /* MS02-NV magic ID value */ +#define MS02NV_VALID_ID 0xbd100248 /* valid data magic ID value */ #define MS02NV_SLOT_SIZE 0x800000 /* size of the address space decoded by the module */ + typedef volatile u32 ms02nv_uint; struct ms02nv_private { diff -Nur linux-2.4.32-rc1/drivers/mtd/maps/Config.in linux-2.4.32-rc1.mips/drivers/mtd/maps/Config.in --- linux-2.4.32-rc1/drivers/mtd/maps/Config.in 2003-06-13 16:51:34.000000000 +0200 +++ linux-2.4.32-rc1.mips/drivers/mtd/maps/Config.in 2004-02-26 01:46:35.000000000 +0100 @@ -51,11 +51,26 @@ dep_tristate ' Pb1000 MTD support' CONFIG_MTD_PB1000 $CONFIG_MIPS_PB1000 dep_tristate ' Pb1500 MTD support' CONFIG_MTD_PB1500 $CONFIG_MIPS_PB1500 dep_tristate ' Pb1100 MTD support' CONFIG_MTD_PB1100 $CONFIG_MIPS_PB1100 + dep_tristate ' Bosporus MTD support' CONFIG_MTD_BOSPORUS $CONFIG_MIPS_BOSPORUS + dep_tristate ' XXS1500 boot flash device' CONFIG_MTD_XXS1500 $CONFIG_MIPS_XXS1500 + dep_tristate ' MTX-1 flash device' CONFIG_MTD_MTX1 $CONFIG_MIPS_MTX1 if [ "$CONFIG_MTD_PB1500" = "y" -o "$CONFIG_MTD_PB1500" = "m" \ -o "$CONFIG_MTD_PB1100" = "y" -o "$CONFIG_MTD_PB1100" = "m" ]; then bool ' Pb[15]00 boot flash device' CONFIG_MTD_PB1500_BOOT bool ' Pb[15]00 user flash device (2nd 32MiB bank)' CONFIG_MTD_PB1500_USER fi + tristate ' Db1x00 MTD support' CONFIG_MTD_DB1X00 + if [ "$CONFIG_MTD_DB1X00" = "y" -o "$CONFIG_MTD_DB1X00" = "m" ]; then + bool ' Db1x00 boot flash device' CONFIG_MTD_DB1X00_BOOT + bool ' Db1x00 user flash device (2nd bank)' CONFIG_MTD_DB1X00_USER + fi + tristate ' Pb1550 MTD support' CONFIG_MTD_PB1550 + if [ "$CONFIG_MTD_PB1550" = "y" -o "$CONFIG_MTD_PB1550" = "m" ]; then + bool ' Pb1550 Boot Flash' CONFIG_MTD_PB1550_BOOT + bool ' Pb1550 User Parameter Flash' CONFIG_MTD_PB1550_USER + fi + dep_tristate ' Hydrogen 3 MTD support' CONFIG_MTD_HYDROGEN3 $CONFIG_MIPS_HYDROGEN3 + dep_tristate ' Mirage MTD support' CONFIG_MTD_MIRAGE $CONFIG_MIPS_MIRAGE dep_tristate ' Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board' CONFIG_MTD_CSTM_MIPS_IXX $CONFIG_MTD_CFI $CONFIG_MTD_JEDEC $CONFIG_MTD_PARTITIONS if [ "$CONFIG_MTD_CSTM_MIPS_IXX" = "y" -o "$CONFIG_MTD_CSTM_MIPS_IXX" = "m" ]; then hex ' Physical start address of flash mapping' CONFIG_MTD_CSTM_MIPS_IXX_START 0x8000000 diff -Nur linux-2.4.32-rc1/drivers/mtd/maps/db1x00-flash.c linux-2.4.32-rc1.mips/drivers/mtd/maps/db1x00-flash.c --- linux-2.4.32-rc1/drivers/mtd/maps/db1x00-flash.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/mtd/maps/db1x00-flash.c 2005-02-03 07:35:29.000000000 +0100 @@ -0,0 +1,283 @@ +/* + * Flash memory access on Alchemy Db1xxx boards + * + * (C) 2003 Pete Popov + * + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#ifdef DEBUG_RW +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +static unsigned long window_addr; +static unsigned long window_size; +static unsigned long flash_size; + +__u8 physmap_read8(struct map_info *map, unsigned long ofs) +{ + __u8 ret; + ret = __raw_readb(map->map_priv_1 + ofs); + DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); + return ret; +} + +__u16 physmap_read16(struct map_info *map, unsigned long ofs) +{ + __u16 ret; + ret = __raw_readw(map->map_priv_1 + ofs); + DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); + return ret; +} + +__u32 physmap_read32(struct map_info *map, unsigned long ofs) +{ + __u32 ret; + ret = __raw_readl(map->map_priv_1 + ofs); + DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); + return ret; +} + +void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) +{ + DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to); + memcpy_fromio(to, map->map_priv_1 + from, len); +} + +void physmap_write8(struct map_info *map, __u8 d, unsigned long adr) +{ + DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); + __raw_writeb(d, map->map_priv_1 + adr); + mb(); +} + +void physmap_write16(struct map_info *map, __u16 d, unsigned long adr) +{ + DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); + __raw_writew(d, map->map_priv_1 + adr); + mb(); +} + +void physmap_write32(struct map_info *map, __u32 d, unsigned long adr) +{ + DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); + __raw_writel(d, map->map_priv_1 + adr); + mb(); +} + +void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) +{ + DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from); + memcpy_toio(map->map_priv_1 + to, from, len); +} + +static struct map_info db1x00_map = { + name: "Db1x00 flash", + read8: physmap_read8, + read16: physmap_read16, + read32: physmap_read32, + copy_from: physmap_copy_from, + write8: physmap_write8, + write16: physmap_write16, + write32: physmap_write32, + copy_to: physmap_copy_to, +}; + +static unsigned char flash_buswidth = 4; + +/* + * The Db1x boards support different flash densities. We setup + * the mtd_partition structures below for default of 64Mbit + * flash densities, and override the partitions sizes, if + * necessary, after we check the board status register. + */ + +#ifdef DB1X00_BOTH_BANKS +/* both banks will be used. Combine the first bank and the first + * part of the second bank together into a single jffs/jffs2 + * partition. + */ +static struct mtd_partition db1x00_partitions[] = { + { + name: "User FS", + size: 0x1c00000, + offset: 0x0000000 + },{ + name: "yamon", + size: 0x0100000, + offset: MTDPART_OFS_APPEND, + mask_flags: MTD_WRITEABLE + },{ + name: "raw kernel", + size: (0x300000-0x40000), /* last 256KB is yamon env */ + offset: MTDPART_OFS_APPEND, + } +}; +#elif defined(DB1X00_BOOT_ONLY) +static struct mtd_partition db1x00_partitions[] = { + { + name: "User FS", + size: 0x00c00000, + offset: 0x0000000 + },{ + name: "yamon", + size: 0x0100000, + offset: MTDPART_OFS_APPEND, + mask_flags: MTD_WRITEABLE + },{ + name: "raw kernel", + size: (0x300000-0x40000), /* last 256KB is yamon env */ + offset: MTDPART_OFS_APPEND, + } +}; +#elif defined(DB1X00_USER_ONLY) +static struct mtd_partition db1x00_partitions[] = { + { + name: "User FS", + size: 0x0e00000, + offset: 0x0000000 + },{ + name: "raw kernel", + size: MTDPART_SIZ_FULL, + offset: MTDPART_OFS_APPEND, + } +}; +#else +#error MTD_DB1X00 define combo error /* should never happen */ +#endif + + +#define NB_OF(x) (sizeof(x)/sizeof(x[0])) + +static struct mtd_partition *parsed_parts; +static struct mtd_info *mymtd; + +/* + * Probe the flash density and setup window address and size + * based on user CONFIG options. There are times when we don't + * want the MTD driver to be probing the boot or user flash, + * so having the option to enable only one bank is important. + */ +int setup_flash_params() +{ + switch ((bcsr->status >> 14) & 0x3) { + case 0: /* 64Mbit devices */ + flash_size = 0x800000; /* 8MB per part */ +#if defined(DB1X00_BOTH_BANKS) + window_addr = 0x1E000000; + window_size = 0x2000000; +#elif defined(DB1X00_BOOT_ONLY) + window_addr = 0x1F000000; + window_size = 0x1000000; +#else /* USER ONLY */ + window_addr = 0x1E000000; + window_size = 0x1000000; +#endif + break; + case 1: + /* 128 Mbit devices */ + flash_size = 0x1000000; /* 16MB per part */ +#if defined(DB1X00_BOTH_BANKS) + window_addr = 0x1C000000; + window_size = 0x4000000; + /* USERFS from 0x1C00 0000 to 0x1FC0 0000 */ + db1x00_partitions[0].size = 0x3C00000; +#elif defined(DB1X00_BOOT_ONLY) + window_addr = 0x1E000000; + window_size = 0x2000000; + /* USERFS from 0x1E00 0000 to 0x1FC0 0000 */ + db1x00_partitions[0].size = 0x1C00000; +#else /* USER ONLY */ + window_addr = 0x1C000000; + window_size = 0x2000000; + /* USERFS from 0x1C00 0000 to 0x1DE00000 */ + db1x00_partitions[0].size = 0x1DE0000; +#endif + break; + case 2: + /* 256 Mbit devices */ + flash_size = 0x4000000; /* 64MB per part */ +#if defined(DB1X00_BOTH_BANKS) + return 1; +#elif defined(DB1X00_BOOT_ONLY) + /* Boot ROM flash bank only; no user bank */ + window_addr = 0x1C000000; + window_size = 0x4000000; + /* USERFS from 0x1C00 0000 to 0x1FC00000 */ + db1x00_partitions[0].size = 0x3C00000; +#else /* USER ONLY */ + return 1; +#endif + break; + default: + return 1; + } + return 0; +} + +int __init db1x00_mtd_init(void) +{ + struct mtd_partition *parts; + int nb_parts = 0; + char *part_type; + + /* Default flash buswidth */ + db1x00_map.buswidth = flash_buswidth; + + if (setup_flash_params()) + return -ENXIO; + + /* + * Static partition definition selection + */ + part_type = "static"; + parts = db1x00_partitions; + nb_parts = NB_OF(db1x00_partitions); + db1x00_map.size = window_size; + + /* + * Now let's probe for the actual flash. Do it here since + * specific machine settings might have been set above. + */ + printk(KERN_NOTICE "Db1xxx flash: probing %d-bit flash bus\n", + db1x00_map.buswidth*8); + db1x00_map.map_priv_1 = + (unsigned long)ioremap(window_addr, window_size); + mymtd = do_map_probe("cfi_probe", &db1x00_map); + if (!mymtd) return -ENXIO; + mymtd->module = THIS_MODULE; + + add_mtd_partitions(mymtd, parts, nb_parts); + return 0; +} + +static void __exit db1x00_mtd_cleanup(void) +{ + if (mymtd) { + del_mtd_partitions(mymtd); + map_destroy(mymtd); + if (parsed_parts) + kfree(parsed_parts); + } +} + +module_init(db1x00_mtd_init); +module_exit(db1x00_mtd_cleanup); + +MODULE_AUTHOR("Pete Popov"); +MODULE_DESCRIPTION("Db1x00 mtd map driver"); +MODULE_LICENSE("GPL"); diff -Nur linux-2.4.32-rc1/drivers/mtd/maps/hydrogen3-flash.c linux-2.4.32-rc1.mips/drivers/mtd/maps/hydrogen3-flash.c --- linux-2.4.32-rc1/drivers/mtd/maps/hydrogen3-flash.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/mtd/maps/hydrogen3-flash.c 2004-01-10 23:40:18.000000000 +0100 @@ -0,0 +1,189 @@ +/* + * Flash memory access on Alchemy HydrogenIII boards + * + * (C) 2003 Pete Popov + * + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#ifdef DEBUG_RW +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +#define WINDOW_ADDR 0x1E000000 +#define WINDOW_SIZE 0x02000000 + + +__u8 physmap_read8(struct map_info *map, unsigned long ofs) +{ + __u8 ret; + ret = __raw_readb(map->map_priv_1 + ofs); + DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); + return ret; +} + +__u16 physmap_read16(struct map_info *map, unsigned long ofs) +{ + __u16 ret; + ret = __raw_readw(map->map_priv_1 + ofs); + DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); + return ret; +} + +__u32 physmap_read32(struct map_info *map, unsigned long ofs) +{ + __u32 ret; + ret = __raw_readl(map->map_priv_1 + ofs); + DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); + return ret; +} + +void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) +{ + DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to); + memcpy_fromio(to, map->map_priv_1 + from, len); +} + +void physmap_write8(struct map_info *map, __u8 d, unsigned long adr) +{ + DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); + __raw_writeb(d, map->map_priv_1 + adr); + mb(); +} + +void physmap_write16(struct map_info *map, __u16 d, unsigned long adr) +{ + DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); + __raw_writew(d, map->map_priv_1 + adr); + mb(); +} + +void physmap_write32(struct map_info *map, __u32 d, unsigned long adr) +{ + DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); + __raw_writel(d, map->map_priv_1 + adr); + mb(); +} + +void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) +{ + DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from); + memcpy_toio(map->map_priv_1 + to, from, len); +} + +static struct map_info hydrogen3_map = { + name: "HydrogenIII flash", + read8: physmap_read8, + read16: physmap_read16, + read32: physmap_read32, + copy_from: physmap_copy_from, + write8: physmap_write8, + write16: physmap_write16, + write32: physmap_write32, + copy_to: physmap_copy_to, +}; + +static unsigned char flash_buswidth = 4; + +/* MTDPART_OFS_APPEND is vastly preferred to any attempt at statically lining + * up the offsets. */ +static struct mtd_partition hydrogen3_partitions[] = { + { + name: "User FS", + size: 0x1c00000, + offset: 0x0000000 + },{ + name: "yamon", + size: 0x0100000, + offset: MTDPART_OFS_APPEND, + mask_flags: MTD_WRITEABLE + },{ + name: "raw kernel", + size: 0x02c0000, + offset: MTDPART_OFS_APPEND + } +}; + +#define NB_OF(x) (sizeof(x)/sizeof(x[0])) + +static struct mtd_partition *parsed_parts; +static struct mtd_info *mymtd; + +int __init hydrogen3_mtd_init(void) +{ + struct mtd_partition *parts; + int nb_parts = 0; + char *part_type; + + /* Default flash buswidth */ + hydrogen3_map.buswidth = flash_buswidth; + + /* + * Static partition definition selection + */ + part_type = "static"; + parts = hydrogen3_partitions; + nb_parts = NB_OF(hydrogen3_partitions); + hydrogen3_map.size = WINDOW_SIZE; + + /* + * Now let's probe for the actual flash. Do it here since + * specific machine settings might have been set above. + */ + printk(KERN_NOTICE "HydrogenIII flash: probing %d-bit flash bus\n", + hydrogen3_map.buswidth*8); + hydrogen3_map.map_priv_1 = + (unsigned long)ioremap(WINDOW_ADDR, WINDOW_SIZE); + mymtd = do_map_probe("cfi_probe", &hydrogen3_map); + if (!mymtd) return -ENXIO; + mymtd->module = THIS_MODULE; + + add_mtd_partitions(mymtd, parts, nb_parts); + return 0; +} + +static void __exit hydrogen3_mtd_cleanup(void) +{ + if (mymtd) { + del_mtd_partitions(mymtd); + map_destroy(mymtd); + if (parsed_parts) + kfree(parsed_parts); + } +} + +/*#ifndef MODULE + +static int __init _bootflashonly(char *str) +{ + bootflashonly = simple_strtol(str, NULL, 0); + return 1; +} + + +__setup("bootflashonly=", _bootflashonly); + +#endif*/ + + +module_init(hydrogen3_mtd_init); +module_exit(hydrogen3_mtd_cleanup); + +MODULE_PARM(bootflashonly, "i"); +MODULE_PARM_DESC(bootflashonly, "1=use \"boot flash only\""); +MODULE_AUTHOR("Pete Popov"); +MODULE_DESCRIPTION("HydrogenIII mtd map driver"); +MODULE_LICENSE("GPL"); diff -Nur linux-2.4.32-rc1/drivers/mtd/maps/lasat.c linux-2.4.32-rc1.mips/drivers/mtd/maps/lasat.c --- linux-2.4.32-rc1/drivers/mtd/maps/lasat.c 2003-06-13 16:51:34.000000000 +0200 +++ linux-2.4.32-rc1.mips/drivers/mtd/maps/lasat.c 2003-08-18 04:59:02.000000000 +0200 @@ -1,15 +1,6 @@ /* * Flash device on lasat 100 and 200 boards * - * Presumably (C) 2002 Brian Murphy or whoever he - * works for. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * $Id: lasat.c,v 1.1 2003/01/24 14:26:38 dwmw2 Exp $ - * */ #include @@ -21,7 +12,6 @@ #include #include #include -#include static struct mtd_info *mymtd; @@ -69,30 +59,33 @@ } static struct map_info sp_map = { - .name = "SP flash", - .buswidth = 4, - .read8 = sp_read8, - .read16 = sp_read16, - .read32 = sp_read32, - .copy_from = sp_copy_from, - .write8 = sp_write8, - .write16 = sp_write16, - .write32 = sp_write32, - .copy_to = sp_copy_to + name: "SP flash", + buswidth: 4, + read8: sp_read8, + read16: sp_read16, + read32: sp_read32, + copy_from: sp_copy_from, + write8: sp_write8, + write16: sp_write16, + write32: sp_write32, + copy_to: sp_copy_to }; static struct mtd_partition partition_info[LASAT_MTD_LAST]; -static char *lasat_mtd_partnames[] = {"Bootloader", "Service", "Normal", "Filesystem", "Config"}; +static char *lasat_mtd_partnames[] = {"Bootloader", "Service", "Normal", "Config", "Filesystem"}; static int __init init_sp(void) { int i; + int nparts = 0; /* this does not play well with the old flash code which * protects and uprotects the flash when necessary */ printk(KERN_NOTICE "Unprotecting flash\n"); *lasat_misc->flash_wp_reg |= 1 << lasat_misc->flash_wp_bit; - sp_map.map_priv_1 = lasat_flash_partition_start(LASAT_MTD_BOOTLOADER); + sp_map.map_priv_1 = ioremap_nocache( + lasat_flash_partition_start(LASAT_MTD_BOOTLOADER), + lasat_board_info.li_flash_size); sp_map.size = lasat_board_info.li_flash_size; printk(KERN_NOTICE "sp flash device: %lx at %lx\n", @@ -109,12 +102,15 @@ for (i=0; i < LASAT_MTD_LAST; i++) { size = lasat_flash_partition_size(i); - partition_info[i].size = size; - partition_info[i].offset = offset; - offset += size; + if (size != 0) { + nparts++; + partition_info[i].size = size; + partition_info[i].offset = offset; + offset += size; + } } - add_mtd_partitions( mymtd, partition_info, LASAT_MTD_LAST ); + add_mtd_partitions( mymtd, partition_info, nparts ); return 0; } @@ -124,11 +120,11 @@ static void __exit cleanup_sp(void) { if (mymtd) { - del_mtd_partitions(mymtd); - map_destroy(mymtd); + del_mtd_partitions(mymtd); + map_destroy(mymtd); } if (sp_map.map_priv_1) { - sp_map.map_priv_1 = 0; + sp_map.map_priv_1 = 0; } } diff -Nur linux-2.4.32-rc1/drivers/mtd/maps/Makefile linux-2.4.32-rc1.mips/drivers/mtd/maps/Makefile --- linux-2.4.32-rc1/drivers/mtd/maps/Makefile 2003-06-13 16:51:34.000000000 +0200 +++ linux-2.4.32-rc1.mips/drivers/mtd/maps/Makefile 2004-02-26 01:46:35.000000000 +0100 @@ -52,7 +52,13 @@ obj-$(CONFIG_MTD_PB1000) += pb1xxx-flash.o obj-$(CONFIG_MTD_PB1100) += pb1xxx-flash.o obj-$(CONFIG_MTD_PB1500) += pb1xxx-flash.o +obj-$(CONFIG_MTD_XXS1500) += xxs1500.o +obj-$(CONFIG_MTD_MTX1) += mtx-1.o obj-$(CONFIG_MTD_LASAT) += lasat.o +obj-$(CONFIG_MTD_DB1X00) += db1x00-flash.o +obj-$(CONFIG_MTD_PB1550) += pb1550-flash.o +obj-$(CONFIG_MTD_HYDROGEN3) += hydrogen3-flash.o +obj-$(CONFIG_MTD_BOSPORUS) += pb1xxx-flash.o obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o obj-$(CONFIG_MTD_EDB7312) += edb7312.o obj-$(CONFIG_MTD_IMPA7) += impa7.o @@ -61,5 +67,6 @@ obj-$(CONFIG_MTD_UCLINUX) += uclinux.o obj-$(CONFIG_MTD_NETtel) += nettel.o obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o +obj-$(CONFIG_MTD_MIRAGE) += mirage-flash.o include $(TOPDIR)/Rules.make diff -Nur linux-2.4.32-rc1/drivers/mtd/maps/mirage-flash.c linux-2.4.32-rc1.mips/drivers/mtd/maps/mirage-flash.c --- linux-2.4.32-rc1/drivers/mtd/maps/mirage-flash.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/mtd/maps/mirage-flash.c 2003-12-22 04:37:22.000000000 +0100 @@ -0,0 +1,194 @@ +/* + * Flash memory access on AMD Mirage board. + * + * (C) 2003 Embedded Edge + * based on mirage-flash.c: + * (C) 2003 Pete Popov + * + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +//#include + +#ifdef DEBUG_RW +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +static unsigned long window_addr; +static unsigned long window_size; +static unsigned long flash_size; + +__u8 physmap_read8(struct map_info *map, unsigned long ofs) +{ + __u8 ret; + ret = __raw_readb(map->map_priv_1 + ofs); + DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); + return ret; +} + +__u16 physmap_read16(struct map_info *map, unsigned long ofs) +{ + __u16 ret; + ret = __raw_readw(map->map_priv_1 + ofs); + DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); + return ret; +} + +__u32 physmap_read32(struct map_info *map, unsigned long ofs) +{ + __u32 ret; + ret = __raw_readl(map->map_priv_1 + ofs); + DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); + return ret; +} + +void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) +{ + DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to); + memcpy_fromio(to, map->map_priv_1 + from, len); +} + +void physmap_write8(struct map_info *map, __u8 d, unsigned long adr) +{ + DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); + __raw_writeb(d, map->map_priv_1 + adr); + mb(); +} + +void physmap_write16(struct map_info *map, __u16 d, unsigned long adr) +{ + DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); + __raw_writew(d, map->map_priv_1 + adr); + mb(); +} + +void physmap_write32(struct map_info *map, __u32 d, unsigned long adr) +{ + DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); + __raw_writel(d, map->map_priv_1 + adr); + mb(); +} + +void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) +{ + DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from); + memcpy_toio(map->map_priv_1 + to, from, len); +} + +static struct map_info mirage_map = { + name: "Mirage flash", + read8: physmap_read8, + read16: physmap_read16, + read32: physmap_read32, + copy_from: physmap_copy_from, + write8: physmap_write8, + write16: physmap_write16, + write32: physmap_write32, + copy_to: physmap_copy_to, +}; + +static unsigned char flash_buswidth = 4; + +static struct mtd_partition mirage_partitions[] = { + { + name: "User FS", + size: 0x1c00000, + offset: 0x0000000 + },{ + name: "yamon", + size: 0x0100000, + offset: MTDPART_OFS_APPEND, + mask_flags: MTD_WRITEABLE + },{ + name: "raw kernel", + size: (0x300000-0x40000), /* last 256KB is yamon env */ + offset: MTDPART_OFS_APPEND, + } +}; + +#define NB_OF(x) (sizeof(x)/sizeof(x[0])) + +static struct mtd_partition *parsed_parts; +static struct mtd_info *mymtd; + +/* + * Probe the flash density and setup window address and size + * based on user CONFIG options. There are times when we don't + * want the MTD driver to be probing the boot or user flash, + * so having the option to enable only one bank is important. + */ +int setup_flash_params() +{ + flash_size = 0x4000000; /* 64MB per part */ + /* Boot ROM flash bank only; no user bank */ + window_addr = 0x1C000000; + window_size = 0x4000000; + /* USERFS from 0x1C00 0000 to 0x1FC00000 */ + mirage_partitions[0].size = 0x3C00000; + return 0; +} + +int __init mirage_mtd_init(void) +{ + struct mtd_partition *parts; + int nb_parts = 0; + char *part_type; + + /* Default flash buswidth */ + mirage_map.buswidth = flash_buswidth; + + if (setup_flash_params()) + return -ENXIO; + + /* + * Static partition definition selection + */ + part_type = "static"; + parts = mirage_partitions; + nb_parts = NB_OF(mirage_partitions); + mirage_map.size = window_size; + + /* + * Now let's probe for the actual flash. Do it here since + * specific machine settings might have been set above. + */ + printk(KERN_NOTICE "Mirage flash: probing %d-bit flash bus\n", + mirage_map.buswidth*8); + mirage_map.map_priv_1 = + (unsigned long)ioremap(window_addr, window_size); + mymtd = do_map_probe("cfi_probe", &mirage_map); + if (!mymtd) return -ENXIO; + mymtd->module = THIS_MODULE; + + add_mtd_partitions(mymtd, parts, nb_parts); + return 0; +} + +static void __exit mirage_mtd_cleanup(void) +{ + if (mymtd) { + del_mtd_partitions(mymtd); + map_destroy(mymtd); + if (parsed_parts) + kfree(parsed_parts); + } +} + +module_init(mirage_mtd_init); +module_exit(mirage_mtd_cleanup); + +MODULE_AUTHOR("Embedded Edge"); +MODULE_DESCRIPTION("Mirage mtd map driver"); +MODULE_LICENSE("GPL"); diff -Nur linux-2.4.32-rc1/drivers/mtd/maps/mtx-1.c linux-2.4.32-rc1.mips/drivers/mtd/maps/mtx-1.c --- linux-2.4.32-rc1/drivers/mtd/maps/mtx-1.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/mtd/maps/mtx-1.c 2003-06-27 02:04:35.000000000 +0200 @@ -0,0 +1,181 @@ +/* + * Flash memory access on 4G Systems MTX-1 board + * + * (C) 2003 Pete Popov + * Bruno Randolf + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#ifdef DEBUG_RW +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +#ifdef CONFIG_MIPS_MTX1 +#define WINDOW_ADDR 0x1E000000 +#define WINDOW_SIZE 0x2000000 +#endif + +__u8 physmap_read8(struct map_info *map, unsigned long ofs) +{ + __u8 ret; + ret = __raw_readb(map->map_priv_1 + ofs); + DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); + return ret; +} + +__u16 physmap_read16(struct map_info *map, unsigned long ofs) +{ + __u16 ret; + ret = __raw_readw(map->map_priv_1 + ofs); + DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); + return ret; +} + +__u32 physmap_read32(struct map_info *map, unsigned long ofs) +{ + __u32 ret; + ret = __raw_readl(map->map_priv_1 + ofs); + DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); + return ret; +} + +void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) +{ + DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to); + memcpy_fromio(to, map->map_priv_1 + from, len); +} + +void physmap_write8(struct map_info *map, __u8 d, unsigned long adr) +{ + DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); + __raw_writeb(d, map->map_priv_1 + adr); + mb(); +} + +void physmap_write16(struct map_info *map, __u16 d, unsigned long adr) +{ + DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); + __raw_writew(d, map->map_priv_1 + adr); + mb(); +} + +void physmap_write32(struct map_info *map, __u32 d, unsigned long adr) +{ + DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); + __raw_writel(d, map->map_priv_1 + adr); + mb(); +} + +void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) +{ + DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from); + memcpy_toio(map->map_priv_1 + to, from, len); +} + + + +static struct map_info mtx1_map = { + name: "MTX-1 flash", + read8: physmap_read8, + read16: physmap_read16, + read32: physmap_read32, + copy_from: physmap_copy_from, + write8: physmap_write8, + write16: physmap_write16, + write32: physmap_write32, + copy_to: physmap_copy_to, +}; + + +static unsigned long flash_size = 0x01000000; +static unsigned char flash_buswidth = 4; +static struct mtd_partition mtx1_partitions[] = { + { + name: "user fs", + size: 0x1c00000, + offset: 0, + },{ + name: "yamon", + size: 0x0100000, + offset: MTDPART_OFS_APPEND, + mask_flags: MTD_WRITEABLE + },{ + name: "raw kernel", + size: 0x02c0000, + offset: MTDPART_OFS_APPEND, + },{ + name: "yamon env vars", + size: 0x0040000, + offset: MTDPART_OFS_APPEND, + mask_flags: MTD_WRITEABLE + } +}; + + +#define NB_OF(x) (sizeof(x)/sizeof(x[0])) + +static struct mtd_partition *parsed_parts; +static struct mtd_info *mymtd; + +int __init mtx1_mtd_init(void) +{ + struct mtd_partition *parts; + int nb_parts = 0; + char *part_type; + + /* Default flash buswidth */ + mtx1_map.buswidth = flash_buswidth; + + /* + * Static partition definition selection + */ + part_type = "static"; + parts = mtx1_partitions; + nb_parts = NB_OF(mtx1_partitions); + mtx1_map.size = flash_size; + + /* + * Now let's probe for the actual flash. Do it here since + * specific machine settings might have been set above. + */ + printk(KERN_NOTICE "MTX-1 flash: probing %d-bit flash bus\n", + mtx1_map.buswidth*8); + mtx1_map.map_priv_1 = + (unsigned long)ioremap(WINDOW_ADDR, WINDOW_SIZE); + mymtd = do_map_probe("cfi_probe", &mtx1_map); + if (!mymtd) return -ENXIO; + mymtd->module = THIS_MODULE; + + add_mtd_partitions(mymtd, parts, nb_parts); + return 0; +} + +static void __exit mtx1_mtd_cleanup(void) +{ + if (mymtd) { + del_mtd_partitions(mymtd); + map_destroy(mymtd); + if (parsed_parts) + kfree(parsed_parts); + } +} + +module_init(mtx1_mtd_init); +module_exit(mtx1_mtd_cleanup); + +MODULE_AUTHOR("Pete Popov"); +MODULE_DESCRIPTION("MTX-1 CFI map driver"); +MODULE_LICENSE("GPL"); diff -Nur linux-2.4.32-rc1/drivers/mtd/maps/pb1550-flash.c linux-2.4.32-rc1.mips/drivers/mtd/maps/pb1550-flash.c --- linux-2.4.32-rc1/drivers/mtd/maps/pb1550-flash.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/mtd/maps/pb1550-flash.c 2004-02-26 01:48:48.000000000 +0100 @@ -0,0 +1,270 @@ +/* + * Flash memory access on Alchemy Pb1550 board + * + * (C) 2004 Embedded Edge, LLC, based on pb1550-flash.c: + * (C) 2003 Pete Popov + * + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#ifdef DEBUG_RW +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +static unsigned long window_addr; +static unsigned long window_size; + +__u8 physmap_read8(struct map_info *map, unsigned long ofs) +{ + __u8 ret; + ret = __raw_readb(map->map_priv_1 + ofs); + DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); + return ret; +} + +__u16 physmap_read16(struct map_info *map, unsigned long ofs) +{ + __u16 ret; + ret = __raw_readw(map->map_priv_1 + ofs); + DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); + return ret; +} + +__u32 physmap_read32(struct map_info *map, unsigned long ofs) +{ + __u32 ret; + ret = __raw_readl(map->map_priv_1 + ofs); + DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); + return ret; +} + +void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) +{ + DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to); + memcpy_fromio(to, map->map_priv_1 + from, len); +} + +void physmap_write8(struct map_info *map, __u8 d, unsigned long adr) +{ + DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); + __raw_writeb(d, map->map_priv_1 + adr); + mb(); +} + +void physmap_write16(struct map_info *map, __u16 d, unsigned long adr) +{ + DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); + __raw_writew(d, map->map_priv_1 + adr); + mb(); +} + +void physmap_write32(struct map_info *map, __u32 d, unsigned long adr) +{ + DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); + __raw_writel(d, map->map_priv_1 + adr); + mb(); +} + +void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) +{ + DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from); + memcpy_toio(map->map_priv_1 + to, from, len); +} + +static struct map_info pb1550_map = { + name: "Pb1550 flash", + read8: physmap_read8, + read16: physmap_read16, + read32: physmap_read32, + copy_from: physmap_copy_from, + write8: physmap_write8, + write16: physmap_write16, + write32: physmap_write32, + copy_to: physmap_copy_to, +}; + +static unsigned char flash_buswidth = 4; + +/* + * Support only 64MB NOR Flash parts + */ + +#ifdef PB1550_BOTH_BANKS +/* both banks will be used. Combine the first bank and the first + * part of the second bank together into a single jffs/jffs2 + * partition. + */ +static struct mtd_partition pb1550_partitions[] = { + /* assume boot[2:0]:swap is '0000' or '1000', which translates to: + * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash + * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash + */ + { + name: "User FS", + size: (0x1FC00000 - 0x18000000), + offset: 0x0000000 + },{ + name: "yamon", + size: 0x0100000, + offset: MTDPART_OFS_APPEND, + mask_flags: MTD_WRITEABLE + },{ + name: "raw kernel", + size: (0x300000 - 0x40000), /* last 256KB is yamon env */ + offset: MTDPART_OFS_APPEND, + } +}; +#elif defined(PB1550_BOOT_ONLY) +static struct mtd_partition pb1550_partitions[] = { + /* assume boot[2:0]:swap is '0000' or '1000', which translates to: + * 1C00 0000 1FFF FFFF CE0 64MB Boot NOR Flash + */ + { + name: "User FS", + size: 0x03c00000, + offset: 0x0000000 + },{ + name: "yamon", + size: 0x0100000, + offset: MTDPART_OFS_APPEND, + mask_flags: MTD_WRITEABLE + },{ + name: "raw kernel", + size: (0x300000-0x40000), /* last 256KB is yamon env */ + offset: MTDPART_OFS_APPEND, + } +}; +#elif defined(PB1550_USER_ONLY) +static struct mtd_partition pb1550_partitions[] = { + /* assume boot[2:0]:swap is '0000' or '1000', which translates to: + * 1800 0000 1BFF FFFF CE0 64MB Param NOR Flash + */ + { + name: "User FS", + size: (0x4000000 - 0x200000), /* reserve 2MB for raw kernel */ + offset: 0x0000000 + },{ + name: "raw kernel", + size: MTDPART_SIZ_FULL, + offset: MTDPART_OFS_APPEND, + } +}; +#else +#error MTD_PB1550 define combo error /* should never happen */ +#endif + +#define NB_OF(x) (sizeof(x)/sizeof(x[0])) + +static struct mtd_partition *parsed_parts; +static struct mtd_info *mymtd; + +/* + * Probe the flash density and setup window address and size + * based on user CONFIG options. There are times when we don't + * want the MTD driver to be probing the boot or user flash, + * so having the option to enable only one bank is important. + */ +int setup_flash_params() +{ + u16 boot_swapboot; + boot_swapboot = (au_readl(MEM_STSTAT) & (0x7<<1)) | + ((bcsr->status >> 6) & 0x1); + printk("Pb1550 MTD: boot:swap %d\n", boot_swapboot); + + switch (boot_swapboot) { + case 0: /* 512Mbit devices, both enabled */ + case 1: + case 8: + case 9: +#if defined(PB1550_BOTH_BANKS) + window_addr = 0x18000000; + window_size = 0x8000000; +#elif defined(PB1550_BOOT_ONLY) + window_addr = 0x1C000000; + window_size = 0x4000000; +#else /* USER ONLY */ + window_addr = 0x1E000000; + window_size = 0x1000000; +#endif + break; + case 0xC: + case 0xD: + case 0xE: + case 0xF: + /* 64 MB Boot NOR Flash is disabled */ + /* and the start address is moved to 0x0C00000 */ + window_addr = 0x0C000000; + window_size = 0x4000000; + default: + printk("Pb1550 MTD: unsupported boot:swap setting\n"); + return 1; + } + return 0; +} + +int __init pb1550_mtd_init(void) +{ + struct mtd_partition *parts; + int nb_parts = 0; + char *part_type; + + /* Default flash buswidth */ + pb1550_map.buswidth = flash_buswidth; + + if (setup_flash_params()) + return -ENXIO; + + /* + * Static partition definition selection + */ + part_type = "static"; + parts = pb1550_partitions; + nb_parts = NB_OF(pb1550_partitions); + pb1550_map.size = window_size; + + /* + * Now let's probe for the actual flash. Do it here since + * specific machine settings might have been set above. + */ + printk(KERN_NOTICE "Pb1550 flash: probing %d-bit flash bus\n", + pb1550_map.buswidth*8); + pb1550_map.map_priv_1 = + (unsigned long)ioremap(window_addr, window_size); + mymtd = do_map_probe("cfi_probe", &pb1550_map); + if (!mymtd) return -ENXIO; + mymtd->module = THIS_MODULE; + + add_mtd_partitions(mymtd, parts, nb_parts); + return 0; +} + +static void __exit pb1550_mtd_cleanup(void) +{ + if (mymtd) { + del_mtd_partitions(mymtd); + map_destroy(mymtd); + if (parsed_parts) + kfree(parsed_parts); + } +} + +module_init(pb1550_mtd_init); +module_exit(pb1550_mtd_cleanup); + +MODULE_AUTHOR("Embedded Edge, LLC"); +MODULE_DESCRIPTION("Pb1550 mtd map driver"); +MODULE_LICENSE("GPL"); diff -Nur linux-2.4.32-rc1/drivers/mtd/maps/pb1xxx-flash.c linux-2.4.32-rc1.mips/drivers/mtd/maps/pb1xxx-flash.c --- linux-2.4.32-rc1/drivers/mtd/maps/pb1xxx-flash.c 2003-06-13 16:51:34.000000000 +0200 +++ linux-2.4.32-rc1.mips/drivers/mtd/maps/pb1xxx-flash.c 2003-05-19 08:27:22.000000000 +0200 @@ -192,6 +192,34 @@ #else #error MTD_PB1500 define combo error /* should never happen */ #endif +#elif defined(CONFIG_MTD_BOSPORUS) +static unsigned char flash_buswidth = 2; +static unsigned long flash_size = 0x02000000; +#define WINDOW_ADDR 0x1F000000 +#define WINDOW_SIZE 0x2000000 +static struct mtd_partition pb1xxx_partitions[] = { + { + name: "User FS", + size: 0x00400000, + offset: 0x00000000, + },{ + name: "Yamon-2", + size: 0x00100000, + offset: 0x00400000, + },{ + name: "Root FS", + size: 0x00700000, + offset: 0x00500000, + },{ + name: "Yamon-1", + size: 0x00100000, + offset: 0x00C00000, + },{ + name: "Kernel", + size: 0x00300000, + offset: 0x00D00000, + } +}; #else #error Unsupported board #endif diff -Nur linux-2.4.32-rc1/drivers/mtd/maps/xxs1500.c linux-2.4.32-rc1.mips/drivers/mtd/maps/xxs1500.c --- linux-2.4.32-rc1/drivers/mtd/maps/xxs1500.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/mtd/maps/xxs1500.c 2003-08-02 04:06:01.000000000 +0200 @@ -0,0 +1,186 @@ +/* + * Flash memory access on MyCable XXS1500 board + * + * (C) 2003 Pete Popov + * + * $Id: xxs1500.c,v 1.1.2.1 2003/06/13 21:15:46 ppopov Exp $ + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#ifdef DEBUG_RW +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +#ifdef CONFIG_MIPS_XXS1500 +#define WINDOW_ADDR 0x1F000000 +#define WINDOW_SIZE 0x1000000 +#endif + +__u8 physmap_read8(struct map_info *map, unsigned long ofs) +{ + __u8 ret; + ret = __raw_readb(map->map_priv_1 + ofs); + DBG("read8 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); + return ret; +} + +__u16 physmap_read16(struct map_info *map, unsigned long ofs) +{ + __u16 ret; + ret = __raw_readw(map->map_priv_1 + ofs); + DBG("read16 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); + return ret; +} + +__u32 physmap_read32(struct map_info *map, unsigned long ofs) +{ + __u32 ret; + ret = __raw_readl(map->map_priv_1 + ofs); + DBG("read32 from %x, %x\n", (unsigned)(map->map_priv_1 + ofs), ret); + return ret; +} + +void physmap_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) +{ + DBG("physmap_copy from %x to %x\n", (unsigned)from, (unsigned)to); + memcpy_fromio(to, map->map_priv_1 + from, len); +} + +void physmap_write8(struct map_info *map, __u8 d, unsigned long adr) +{ + DBG("write8 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); + __raw_writeb(d, map->map_priv_1 + adr); + mb(); +} + +void physmap_write16(struct map_info *map, __u16 d, unsigned long adr) +{ + DBG("write16 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); + __raw_writew(d, map->map_priv_1 + adr); + mb(); +} + +void physmap_write32(struct map_info *map, __u32 d, unsigned long adr) +{ + DBG("write32 at %x, %x\n", (unsigned)(map->map_priv_1 + adr), d); + __raw_writel(d, map->map_priv_1 + adr); + mb(); +} + +void physmap_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) +{ + DBG("physmap_copy_to %x from %x\n", (unsigned)to, (unsigned)from); + memcpy_toio(map->map_priv_1 + to, from, len); +} + + + +static struct map_info xxs1500_map = { + name: "XXS1500 flash", + read8: physmap_read8, + read16: physmap_read16, + read32: physmap_read32, + copy_from: physmap_copy_from, + write8: physmap_write8, + write16: physmap_write16, + write32: physmap_write32, + copy_to: physmap_copy_to, +}; + + +static unsigned long flash_size = 0x00800000; +static unsigned char flash_buswidth = 4; +static struct mtd_partition xxs1500_partitions[] = { + { + name: "kernel image", + size: 0x00200000, + offset: 0, + },{ + name: "user fs 0", + size: (0x00C00000-0x200000), + offset: MTDPART_OFS_APPEND, + },{ + name: "yamon", + size: 0x00100000, + offset: MTDPART_OFS_APPEND, + mask_flags: MTD_WRITEABLE + },{ + name: "user fs 1", + size: 0x2c0000, + offset: MTDPART_OFS_APPEND, + },{ + name: "yamon env vars", + size: 0x040000, + offset: MTDPART_OFS_APPEND, + mask_flags: MTD_WRITEABLE + } +}; + + +#define NB_OF(x) (sizeof(x)/sizeof(x[0])) + +static struct mtd_partition *parsed_parts; +static struct mtd_info *mymtd; + +int __init xxs1500_mtd_init(void) +{ + struct mtd_partition *parts; + int nb_parts = 0; + char *part_type; + + /* Default flash buswidth */ + xxs1500_map.buswidth = flash_buswidth; + + /* + * Static partition definition selection + */ + part_type = "static"; + parts = xxs1500_partitions; + nb_parts = NB_OF(xxs1500_partitions); + xxs1500_map.size = flash_size; + + /* + * Now let's probe for the actual flash. Do it here since + * specific machine settings might have been set above. + */ + printk(KERN_NOTICE "XXS1500 flash: probing %d-bit flash bus\n", + xxs1500_map.buswidth*8); + xxs1500_map.map_priv_1 = + (unsigned long)ioremap(WINDOW_ADDR, WINDOW_SIZE); + mymtd = do_map_probe("cfi_probe", &xxs1500_map); + if (!mymtd) return -ENXIO; + mymtd->module = THIS_MODULE; + + add_mtd_partitions(mymtd, parts, nb_parts); + return 0; +} + +static void __exit xxs1500_mtd_cleanup(void) +{ + if (mymtd) { + del_mtd_partitions(mymtd); + map_destroy(mymtd); + if (parsed_parts) + kfree(parsed_parts); + } +} + +module_init(xxs1500_mtd_init); +module_exit(xxs1500_mtd_cleanup); + +MODULE_AUTHOR("Pete Popov"); +MODULE_DESCRIPTION("XXS1500 CFI map driver"); +MODULE_LICENSE("GPL"); diff -Nur linux-2.4.32-rc1/drivers/net/defxx.c linux-2.4.32-rc1.mips/drivers/net/defxx.c --- linux-2.4.32-rc1/drivers/net/defxx.c 2004-11-17 12:54:21.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/net/defxx.c 2004-11-19 01:28:39.000000000 +0100 @@ -10,24 +10,18 @@ * * Abstract: * A Linux device driver supporting the Digital Equipment Corporation - * FDDI EISA and PCI controller families. Supported adapters include: + * FDDI TURBOchannel, EISA and PCI controller families. Supported + * adapters include: * - * DEC FDDIcontroller/EISA (DEFEA) - * DEC FDDIcontroller/PCI (DEFPA) + * DEC FDDIcontroller/TURBOchannel (DEFTA) + * DEC FDDIcontroller/EISA (DEFEA) + * DEC FDDIcontroller/PCI (DEFPA) * - * Maintainers: - * LVS Lawrence V. Stefani - * - * Contact: - * The author may be reached at: + * The original author: + * LVS Lawrence V. Stefani * - * Inet: stefani@lkg.dec.com - * (NOTE! this address no longer works -jgarzik) - * - * Mail: Digital Equipment Corporation - * 550 King Street - * M/S: LKG1-3/M07 - * Littleton, MA 01460 + * Maintainers: + * macro Maciej W. Rozycki * * Credits: * I'd like to thank Patricia Cross for helping me get started with @@ -197,16 +191,16 @@ * Sep 2000 tjeerd Fix leak on unload, cosmetic code cleanup * Feb 2001 Skb allocation fixes * Feb 2001 davej PCI enable cleanups. + * 04 Aug 2003 macro Converted to the DMA API. + * 14 Aug 2004 macro Fix device names reported. + * 26 Sep 2004 macro TURBOchannel support. */ /* Include files */ #include - #include -#include #include -#include #include #include #include @@ -215,19 +209,33 @@ #include #include #include +#include +#include + #include #include #include -#include -#include +#ifdef CONFIG_TC +#include +#else +static int search_tc_card(const char *name) { return -ENODEV; } +static void claim_tc_card(int slot) { } +static void release_tc_card(int slot) { } +static unsigned long get_tc_base_addr(int slot) { return 0; } +static unsigned long get_tc_irq_nr(int slot) { return -1; } +#endif #include "defxx.h" -/* Version information string - should be updated prior to each new release!!! */ +/* Version information string should be updated prior to each new release! */ +#define DRV_NAME "defxx" +#define DRV_VERSION "v1.07T" +#define DRV_RELDATE "2004/09/26" static char version[] __devinitdata = - "defxx.c:v1.05e 2001/02/03 Lawrence V. Stefani and others\n"; + DRV_NAME ": " DRV_VERSION " " DRV_RELDATE + " Lawrence V. Stefani and others\n"; #define DYNAMIC_BUFFERS 1 @@ -243,7 +251,7 @@ static void dfx_bus_init(struct net_device *dev); static void dfx_bus_config_check(DFX_board_t *bp); -static int dfx_driver_init(struct net_device *dev); +static int dfx_driver_init(struct net_device *dev, const char *print_name); static int dfx_adap_init(DFX_board_t *bp, int get_buffers); static int dfx_open(struct net_device *dev); @@ -337,48 +345,84 @@ int offset, u8 data ) +{ + if (bp->bus_type == DFX_BUS_TYPE_TC) + { + volatile u8 *addr = (void *)(bp->base_addr + offset); + *addr = data; + mb(); + } + else { u16 port = bp->base_addr + offset; outb(data, port); } +} static inline void dfx_port_read_byte( DFX_board_t *bp, int offset, u8 *data ) +{ + if (bp->bus_type == DFX_BUS_TYPE_TC) + { + volatile u8 *addr = (void *)(bp->base_addr + offset); + mb(); + *data = *addr; + } + else { u16 port = bp->base_addr + offset; *data = inb(port); } +} static inline void dfx_port_write_long( DFX_board_t *bp, int offset, u32 data ) +{ + if (bp->bus_type == DFX_BUS_TYPE_TC) + { + volatile u32 *addr = (void *)(bp->base_addr + offset); + *addr = data; + mb(); + } + else { u16 port = bp->base_addr + offset; outl(data, port); } +} static inline void dfx_port_read_long( DFX_board_t *bp, int offset, u32 *data ) +{ + if (bp->bus_type == DFX_BUS_TYPE_TC) + { + volatile u32 *addr = (void *)(bp->base_addr + offset); + mb(); + *data = *addr; + } + else { u16 port = bp->base_addr + offset; *data = inl(port); } +} /* @@ -393,8 +437,9 @@ * Condition code * * Arguments: - * pdev - pointer to pci device information (NULL for EISA) - * ioaddr - pointer to port (NULL for PCI) + * pdev - pointer to pci device information (NULL for EISA or TURBOchannel) + * bus_type - bus type (one of DFX_BUS_TYPE_*) + * handle - bus-specific data: slot (TC), pointer to port (EISA), NULL (PCI) * * Functional Description: * @@ -410,54 +455,68 @@ * initialized and the board resources are read and stored in * the device structure. */ -static int __devinit dfx_init_one_pci_or_eisa(struct pci_dev *pdev, long ioaddr) +static int __devinit dfx_init_one_pci_or_eisa(struct pci_dev *pdev, u32 bus_type, long handle) { + static int version_disp; + char *print_name = DRV_NAME; struct net_device *dev; DFX_board_t *bp; /* board pointer */ + long ioaddr; /* pointer to port */ + unsigned long len; /* resource length */ + int alloc_size; /* total buffer size used */ int err; -#ifndef MODULE - static int version_disp; - - if (!version_disp) /* display version info if adapter is found */ - { + if (!version_disp) { /* display version info if adapter is found */ version_disp = 1; /* set display flag to TRUE so that */ printk(version); /* we only display this string ONCE */ } -#endif - /* - * init_fddidev() allocates a device structure with private data, clears the device structure and private data, - * and calls fddi_setup() and register_netdev(). Not much left to do for us here. - */ - dev = init_fddidev(NULL, sizeof(*bp)); + if (pdev != NULL) + print_name = pdev->slot_name; + + dev = alloc_fddidev(sizeof(*bp)); if (!dev) { - printk (KERN_ERR "defxx: unable to allocate fddidev, aborting\n"); + printk(KERN_ERR "%s: unable to allocate fddidev, aborting\n", + print_name); return -ENOMEM; } /* Enable PCI device. */ - if (pdev != NULL) { + if (bus_type == DFX_BUS_TYPE_PCI) { err = pci_enable_device (pdev); if (err) goto err_out; ioaddr = pci_resource_start (pdev, 1); } SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); bp = dev->priv; - if (!request_region (ioaddr, pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN, dev->name)) { - printk (KERN_ERR "%s: Cannot reserve I/O resource 0x%x @ 0x%lx, aborting\n", - dev->name, PFI_K_CSR_IO_LEN, ioaddr); + if (bus_type == DFX_BUS_TYPE_TC) { + /* TURBOchannel board */ + bp->slot = handle; + claim_tc_card(bp->slot); + ioaddr = get_tc_base_addr(handle) + PI_TC_K_CSR_OFFSET; + len = PI_TC_K_CSR_LEN; + } else if (bus_type == DFX_BUS_TYPE_EISA) { + /* EISA board */ + ioaddr = handle; + len = PI_ESIC_K_CSR_IO_LEN; + } else + /* PCI board */ + len = PFI_K_CSR_IO_LEN; + dev->base_addr = ioaddr; /* save port (I/O) base address */ + + if (!request_region(ioaddr, len, print_name)) { + printk(KERN_ERR "%s: Cannot reserve I/O resource " + "0x%lx @ 0x%lx, aborting\n", print_name, len, ioaddr); err = -EBUSY; goto err_out; } /* Initialize new device structure */ - dev->base_addr = ioaddr; /* save port (I/O) base address */ - dev->get_stats = dfx_ctl_get_stats; dev->open = dfx_open; dev->stop = dfx_close; @@ -465,37 +524,54 @@ dev->set_multicast_list = dfx_ctl_set_multicast_list; dev->set_mac_address = dfx_ctl_set_mac_address; - if (pdev == NULL) { - /* EISA board */ - bp->bus_type = DFX_BUS_TYPE_EISA; + bp->bus_type = bus_type; + if (bus_type == DFX_BUS_TYPE_TC || bus_type == DFX_BUS_TYPE_EISA) { + /* TURBOchannel or EISA board */ bp->next = root_dfx_eisa_dev; root_dfx_eisa_dev = dev; } else { /* PCI board */ - bp->bus_type = DFX_BUS_TYPE_PCI; bp->pci_dev = pdev; pci_set_drvdata (pdev, dev); pci_set_master (pdev); } - if (dfx_driver_init(dev) != DFX_K_SUCCESS) { + + if (dfx_driver_init(dev, print_name) != DFX_K_SUCCESS) { err = -ENODEV; goto err_out_region; } + err = register_netdev(dev); + if (err) + goto err_out_kfree; + + printk("%s: registered as %s\n", print_name, dev->name); return 0; +err_out_kfree: + alloc_size = sizeof(PI_DESCR_BLOCK) + + PI_CMD_REQ_K_SIZE_MAX + PI_CMD_RSP_K_SIZE_MAX + +#ifndef DYNAMIC_BUFFERS + (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX) + +#endif + sizeof(PI_CONSUMER_BLOCK) + + (PI_ALIGN_K_DESC_BLK - 1); + if (bp->kmalloced) + pci_free_consistent(pdev, alloc_size, + bp->kmalloced, bp->kmalloced_dma); err_out_region: - release_region(ioaddr, pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN); + release_region(ioaddr, len); err_out: - unregister_netdev(dev); - kfree(dev); + if (bp->bus_type == DFX_BUS_TYPE_TC) + release_tc_card(bp->slot); + free_netdev(dev); return err; } static int __devinit dfx_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { - return dfx_init_one_pci_or_eisa(pdev, 0); + return dfx_init_one_pci_or_eisa(pdev, DFX_BUS_TYPE_PCI, 0); } static int __init dfx_eisa_init(void) @@ -507,6 +583,7 @@ DBG_printk("In dfx_eisa_init...\n"); +#ifdef CONFIG_EISA /* Scan for FDDI EISA controllers */ for (i=0; i < DFX_MAX_EISA_SLOTS; i++) /* only scan for up to 16 EISA slots */ @@ -517,9 +594,27 @@ { port = (i << 12); /* recalc base addr */ - if (dfx_init_one_pci_or_eisa(NULL, port) == 0) rc = 0; + if (dfx_init_one_pci_or_eisa(NULL, DFX_BUS_TYPE_EISA, port) == 0) rc = 0; } } +#endif + return rc; +} + +static int __init dfx_tc_init(void) +{ + int rc = -ENODEV; + int slot; /* TC slot number */ + + DBG_printk("In dfx_tc_init...\n"); + + /* Scan for FDDI TC controllers */ + while ((slot = search_tc_card("PMAF-F")) >= 0) { + if (dfx_init_one_pci_or_eisa(NULL, DFX_BUS_TYPE_TC, slot) == 0) + rc = 0; + else + break; + } return rc; } @@ -583,8 +678,9 @@ /* Initialize adapter based on bus type */ - if (bp->bus_type == DFX_BUS_TYPE_EISA) - { + if (bp->bus_type == DFX_BUS_TYPE_TC) { + dev->irq = get_tc_irq_nr(bp->slot); + } else if (bp->bus_type == DFX_BUS_TYPE_EISA) { /* Get the interrupt level from the ESIC chip */ dfx_port_read_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, &val); @@ -766,6 +862,7 @@ * * Arguments: * dev - pointer to device information + * print_name - printable device name * * Functional Description: * This function allocates additional resources such as the host memory @@ -780,20 +877,21 @@ * or read adapter MAC address * * Assumptions: - * Memory allocated from kmalloc() call is physically contiguous, locked - * memory whose physical address equals its virtual address. + * Memory allocated from pci_alloc_consistent() call is physically + * contiguous, locked memory. * * Side Effects: * Adapter is reset and should be in DMA_UNAVAILABLE state before * returning from this routine. */ -static int __devinit dfx_driver_init(struct net_device *dev) +static int __devinit dfx_driver_init(struct net_device *dev, + const char *print_name) { DFX_board_t *bp = dev->priv; int alloc_size; /* total buffer size needed */ char *top_v, *curr_v; /* virtual addrs into memory block */ - u32 top_p, curr_p; /* physical addrs into memory block */ + dma_addr_t top_p, curr_p; /* physical addrs into memory block */ u32 data; /* host data register value */ DBG_printk("In dfx_driver_init...\n"); @@ -837,26 +935,20 @@ /* Read the factory MAC address from the adapter then save it */ - if (dfx_hw_port_ctrl_req(bp, - PI_PCTRL_M_MLA, - PI_PDATA_A_MLA_K_LO, - 0, - &data) != DFX_K_SUCCESS) - { - printk("%s: Could not read adapter factory MAC address!\n", dev->name); + if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_LO, 0, + &data) != DFX_K_SUCCESS) { + printk("%s: Could not read adapter factory MAC address!\n", + print_name); return(DFX_K_FAILURE); - } + } memcpy(&bp->factory_mac_addr[0], &data, sizeof(u32)); - if (dfx_hw_port_ctrl_req(bp, - PI_PCTRL_M_MLA, - PI_PDATA_A_MLA_K_HI, - 0, - &data) != DFX_K_SUCCESS) - { - printk("%s: Could not read adapter factory MAC address!\n", dev->name); + if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_HI, 0, + &data) != DFX_K_SUCCESS) { + printk("%s: Could not read adapter factory MAC address!\n", + print_name); return(DFX_K_FAILURE); - } + } memcpy(&bp->factory_mac_addr[4], &data, sizeof(u16)); /* @@ -867,28 +959,27 @@ */ memcpy(dev->dev_addr, bp->factory_mac_addr, FDDI_K_ALEN); - if (bp->bus_type == DFX_BUS_TYPE_EISA) - printk("%s: DEFEA at I/O addr = 0x%lX, IRQ = %d, Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n", - dev->name, - dev->base_addr, - dev->irq, - dev->dev_addr[0], - dev->dev_addr[1], - dev->dev_addr[2], - dev->dev_addr[3], - dev->dev_addr[4], - dev->dev_addr[5]); + if (bp->bus_type == DFX_BUS_TYPE_TC) + printk("%s: DEFTA at addr = 0x%lX, IRQ = %d, " + "Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n", + print_name, dev->base_addr, dev->irq, + dev->dev_addr[0], dev->dev_addr[1], + dev->dev_addr[2], dev->dev_addr[3], + dev->dev_addr[4], dev->dev_addr[5]); + else if (bp->bus_type == DFX_BUS_TYPE_EISA) + printk("%s: DEFEA at I/O addr = 0x%lX, IRQ = %d, " + "Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n", + print_name, dev->base_addr, dev->irq, + dev->dev_addr[0], dev->dev_addr[1], + dev->dev_addr[2], dev->dev_addr[3], + dev->dev_addr[4], dev->dev_addr[5]); else - printk("%s: DEFPA at I/O addr = 0x%lX, IRQ = %d, Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n", - dev->name, - dev->base_addr, - dev->irq, - dev->dev_addr[0], - dev->dev_addr[1], - dev->dev_addr[2], - dev->dev_addr[3], - dev->dev_addr[4], - dev->dev_addr[5]); + printk("%s: DEFPA at I/O addr = 0x%lX, IRQ = %d, " + "Hardware addr = %02X-%02X-%02X-%02X-%02X-%02X\n", + print_name, dev->base_addr, dev->irq, + dev->dev_addr[0], dev->dev_addr[1], + dev->dev_addr[2], dev->dev_addr[3], + dev->dev_addr[4], dev->dev_addr[5]); /* * Get memory for descriptor block, consumer block, and other buffers @@ -903,14 +994,15 @@ #endif sizeof(PI_CONSUMER_BLOCK) + (PI_ALIGN_K_DESC_BLK - 1); - bp->kmalloced = top_v = (char *) kmalloc(alloc_size, GFP_KERNEL); - if (top_v == NULL) - { - printk("%s: Could not allocate memory for host buffers and structures!\n", dev->name); + bp->kmalloced = top_v = pci_alloc_consistent(bp->pci_dev, alloc_size, + &bp->kmalloced_dma); + if (top_v == NULL) { + printk("%s: Could not allocate memory for host buffers " + "and structures!\n", print_name); return(DFX_K_FAILURE); - } + } memset(top_v, 0, alloc_size); /* zero out memory before continuing */ - top_p = virt_to_bus(top_v); /* get physical address of buffer */ + top_p = bp->kmalloced_dma; /* get physical address of buffer */ /* * To guarantee the 8K alignment required for the descriptor block, 8K - 1 @@ -924,7 +1016,7 @@ * for allocating the needed memory. */ - curr_p = (u32) (ALIGN(top_p, PI_ALIGN_K_DESC_BLK)); + curr_p = ALIGN(top_p, PI_ALIGN_K_DESC_BLK); curr_v = top_v + (curr_p - top_p); /* Reserve space for descriptor block */ @@ -965,14 +1057,20 @@ /* Display virtual and physical addresses if debug driver */ - DBG_printk("%s: Descriptor block virt = %0lX, phys = %0X\n", dev->name, (long)bp->descr_block_virt, bp->descr_block_phys); - DBG_printk("%s: Command Request buffer virt = %0lX, phys = %0X\n", dev->name, (long)bp->cmd_req_virt, bp->cmd_req_phys); - DBG_printk("%s: Command Response buffer virt = %0lX, phys = %0X\n", dev->name, (long)bp->cmd_rsp_virt, bp->cmd_rsp_phys); - DBG_printk("%s: Receive buffer block virt = %0lX, phys = %0X\n", dev->name, (long)bp->rcv_block_virt, bp->rcv_block_phys); - DBG_printk("%s: Consumer block virt = %0lX, phys = %0X\n", dev->name, (long)bp->cons_block_virt, bp->cons_block_phys); + DBG_printk("%s: Descriptor block virt = %0lX, phys = %0X\n", + print_name, + (long)bp->descr_block_virt, bp->descr_block_phys); + DBG_printk("%s: Command Request buffer virt = %0lX, phys = %0X\n", + print_name, (long)bp->cmd_req_virt, bp->cmd_req_phys); + DBG_printk("%s: Command Response buffer virt = %0lX, phys = %0X\n", + print_name, (long)bp->cmd_rsp_virt, bp->cmd_rsp_phys); + DBG_printk("%s: Receive buffer block virt = %0lX, phys = %0X\n", + print_name, (long)bp->rcv_block_virt, bp->rcv_block_phys); + DBG_printk("%s: Consumer block virt = %0lX, phys = %0X\n", + print_name, (long)bp->cons_block_virt, bp->cons_block_phys); return(DFX_K_SUCCESS); - } +} /* @@ -1218,7 +1316,9 @@ /* Register IRQ - support shared interrupts by passing device ptr */ - ret = request_irq(dev->irq, (void *)dfx_interrupt, SA_SHIRQ, dev->name, dev); + ret = request_irq(dev->irq, (void *)dfx_interrupt, + (bp->bus_type == DFX_BUS_TYPE_TC) ? 0 : SA_SHIRQ, + dev->name, dev); if (ret) { printk(KERN_ERR "%s: Requested IRQ %d is busy\n", dev->name, dev->irq); return ret; @@ -1737,7 +1837,7 @@ dfx_port_write_long(bp, PFI_K_REG_MODE_CTRL, (PFI_MODE_M_PDQ_INT_ENB + PFI_MODE_M_DMA_ENB)); } - else + else if (bp->bus_type == DFX_BUS_TYPE_EISA) { /* Disable interrupts at the ESIC */ @@ -1755,6 +1855,13 @@ tmp |= PI_CONFIG_STAT_0_M_INT_ENB; dfx_port_write_byte(bp, PI_ESIC_K_IO_CONFIG_STAT_0, tmp); } + else { + /* TC doesn't share interrupts so no need to disable them */ + + /* Call interrupt service routine for this adapter */ + + dfx_int_common(dev); + } spin_unlock(&bp->lock); } @@ -2663,12 +2770,12 @@ static void my_skb_align(struct sk_buff *skb, int n) { - u32 x=(u32)skb->data; /* We only want the low bits .. */ - u32 v; + unsigned long x = (unsigned long)skb->data; + unsigned long v; - v=(x+n-1)&~(n-1); /* Where we want to be */ + v = ALIGN(x, n); /* Where we want to be */ - skb_reserve(skb, v-x); + skb_reserve(skb, v - x); } @@ -2745,7 +2852,10 @@ */ my_skb_align(newskb, 128); - bp->descr_block_virt->rcv_data[i+j].long_1 = virt_to_bus(newskb->data); + bp->descr_block_virt->rcv_data[i + j].long_1 = + (u32)pci_map_single(bp->pci_dev, newskb->data, + NEW_SKB_SIZE, + PCI_DMA_FROMDEVICE); /* * p_rcv_buff_va is only used inside the * kernel so we put the skb pointer here. @@ -2859,9 +2969,17 @@ my_skb_align(newskb, 128); skb = (struct sk_buff *)bp->p_rcv_buff_va[entry]; + pci_unmap_single(bp->pci_dev, + bp->descr_block_virt->rcv_data[entry].long_1, + NEW_SKB_SIZE, + PCI_DMA_FROMDEVICE); skb_reserve(skb, RCV_BUFF_K_PADDING); bp->p_rcv_buff_va[entry] = (char *)newskb; - bp->descr_block_virt->rcv_data[entry].long_1 = virt_to_bus(newskb->data); + bp->descr_block_virt->rcv_data[entry].long_1 = + (u32)pci_map_single(bp->pci_dev, + newskb->data, + NEW_SKB_SIZE, + PCI_DMA_FROMDEVICE); } else skb = NULL; } else @@ -2934,7 +3052,7 @@ * is contained in a single physically contiguous buffer * in which the virtual address of the start of packet * (skb->data) can be converted to a physical address - * by using virt_to_bus(). + * by using pci_map_single(). * * Since the adapter architecture requires a three byte * packet request header to prepend the start of packet, @@ -3082,12 +3200,13 @@ * skb->data. * 6. The physical address of the start of packet * can be determined from the virtual address - * by using virt_to_bus() and is only 32-bits + * by using pci_map_single() and is only 32-bits * wide. */ p_xmt_descr->long_0 = (u32) (PI_XMT_DESCR_M_SOP | PI_XMT_DESCR_M_EOP | ((skb->len) << PI_XMT_DESCR_V_SEG_LEN)); - p_xmt_descr->long_1 = (u32) virt_to_bus(skb->data); + p_xmt_descr->long_1 = (u32)pci_map_single(bp->pci_dev, skb->data, + skb->len, PCI_DMA_TODEVICE); /* * Verify that descriptor is actually available @@ -3171,6 +3290,7 @@ { XMT_DRIVER_DESCR *p_xmt_drv_descr; /* ptr to transmit driver descriptor */ PI_TYPE_2_CONSUMER *p_type_2_cons; /* ptr to rcv/xmt consumer block register */ + u8 comp; /* local transmit completion index */ int freed = 0; /* buffers freed */ /* Service all consumed transmit frames */ @@ -3188,7 +3308,11 @@ bp->xmt_total_bytes += p_xmt_drv_descr->p_skb->len; /* Return skb to operating system */ - + comp = bp->rcv_xmt_reg.index.xmt_comp; + pci_unmap_single(bp->pci_dev, + bp->descr_block_virt->xmt_data[comp].long_1, + p_xmt_drv_descr->p_skb->len, + PCI_DMA_TODEVICE); dev_kfree_skb_irq(p_xmt_drv_descr->p_skb); /* @@ -3297,6 +3421,7 @@ { u32 prod_cons; /* rcv/xmt consumer block longword */ XMT_DRIVER_DESCR *p_xmt_drv_descr; /* ptr to transmit driver descriptor */ + u8 comp; /* local transmit completion index */ /* Flush all outstanding transmit frames */ @@ -3307,7 +3432,11 @@ p_xmt_drv_descr = &(bp->xmt_drv_descr_blk[bp->rcv_xmt_reg.index.xmt_comp]); /* Return skb to operating system */ - + comp = bp->rcv_xmt_reg.index.xmt_comp; + pci_unmap_single(bp->pci_dev, + bp->descr_block_virt->xmt_data[comp].long_1, + p_xmt_drv_descr->p_skb->len, + PCI_DMA_TODEVICE); dev_kfree_skb(p_xmt_drv_descr->p_skb); /* Increment transmit error counter */ @@ -3337,12 +3466,36 @@ static void __devexit dfx_remove_one_pci_or_eisa(struct pci_dev *pdev, struct net_device *dev) { - DFX_board_t *bp = dev->priv; + DFX_board_t *bp = dev->priv; + unsigned long len; /* resource length */ + int alloc_size; /* total buffer size used */ + if (bp->bus_type == DFX_BUS_TYPE_TC) { + /* TURBOchannel board */ + len = PI_TC_K_CSR_LEN; + } else if (bp->bus_type == DFX_BUS_TYPE_EISA) { + /* EISA board */ + len = PI_ESIC_K_CSR_IO_LEN; + } else { + len = PFI_K_CSR_IO_LEN; + } unregister_netdev(dev); - release_region(dev->base_addr, pdev ? PFI_K_CSR_IO_LEN : PI_ESIC_K_CSR_IO_LEN ); - if (bp->kmalloced) kfree(bp->kmalloced); - kfree(dev); + release_region(dev->base_addr, len); + + if (bp->bus_type == DFX_BUS_TYPE_TC) + release_tc_card(bp->slot); + + alloc_size = sizeof(PI_DESCR_BLOCK) + + PI_CMD_REQ_K_SIZE_MAX + PI_CMD_RSP_K_SIZE_MAX + +#ifndef DYNAMIC_BUFFERS + (bp->rcv_bufs_to_post * PI_RCV_DATA_K_SIZE_MAX) + +#endif + sizeof(PI_CONSUMER_BLOCK) + + (PI_ALIGN_K_DESC_BLK - 1); + if (bp->kmalloced) + pci_free_consistent(pdev, alloc_size, bp->kmalloced, + bp->kmalloced_dma); + free_netdev(dev); } static void __devexit dfx_remove_one (struct pci_dev *pdev) @@ -3353,21 +3506,22 @@ pci_set_drvdata(pdev, NULL); } -static struct pci_device_id dfx_pci_tbl[] __devinitdata = { +static struct pci_device_id dfx_pci_tbl[] = { { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_FDDI, PCI_ANY_ID, PCI_ANY_ID, }, { 0, } }; MODULE_DEVICE_TABLE(pci, dfx_pci_tbl); static struct pci_driver dfx_driver = { - name: "defxx", - probe: dfx_init_one, - remove: __devexit_p(dfx_remove_one), - id_table: dfx_pci_tbl, + .name = "defxx", + .probe = dfx_init_one, + .remove = __devexit_p(dfx_remove_one), + .id_table = dfx_pci_tbl, }; static int dfx_have_pci; static int dfx_have_eisa; +static int dfx_have_tc; static void __exit dfx_eisa_cleanup(void) @@ -3388,12 +3542,7 @@ static int __init dfx_init(void) { - int rc_pci, rc_eisa; - -/* when a module, this is printed whether or not devices are found in probe */ -#ifdef MODULE - printk(version); -#endif + int rc_pci, rc_eisa, rc_tc; rc_pci = pci_module_init(&dfx_driver); if (rc_pci >= 0) dfx_have_pci = 1; @@ -3401,20 +3550,27 @@ rc_eisa = dfx_eisa_init(); if (rc_eisa >= 0) dfx_have_eisa = 1; - return ((rc_eisa < 0) ? 0 : rc_eisa) + ((rc_pci < 0) ? 0 : rc_pci); + rc_tc = dfx_tc_init(); + if (rc_tc >= 0) dfx_have_tc = 1; + + return ((rc_tc < 0) ? 0 : rc_tc) + + ((rc_eisa < 0) ? 0 : rc_eisa) + + ((rc_pci < 0) ? 0 : rc_pci); } static void __exit dfx_cleanup(void) { if (dfx_have_pci) pci_unregister_driver(&dfx_driver); - if (dfx_have_eisa) + if (dfx_have_eisa || dfx_have_tc) dfx_eisa_cleanup(); - } module_init(dfx_init); module_exit(dfx_cleanup); +MODULE_AUTHOR("Lawrence V. Stefani"); +MODULE_DESCRIPTION("DEC FDDIcontroller EISA/PCI (DEFEA/DEFPA) driver " + DRV_VERSION " " DRV_RELDATE); MODULE_LICENSE("GPL"); diff -Nur linux-2.4.32-rc1/drivers/net/defxx.h linux-2.4.32-rc1.mips/drivers/net/defxx.h --- linux-2.4.32-rc1/drivers/net/defxx.h 2001-02-13 22:15:05.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/net/defxx.h 2004-10-03 20:06:48.000000000 +0200 @@ -12,17 +12,11 @@ * Contains all definitions specified by port specification and required * by the defxx.c driver. * - * Maintainers: - * LVS Lawrence V. Stefani - * - * Contact: - * The author may be reached at: + * The original author: + * LVS Lawrence V. Stefani * - * Inet: stefani@lkg.dec.com - * Mail: Digital Equipment Corporation - * 550 King Street - * M/S: LKG1-3/M07 - * Littleton, MA 01460 + * Maintainers: + * macro Maciej W. Rozycki * * Modification History: * Date Name Description @@ -30,6 +24,7 @@ * 09-Sep-96 LVS Added group_prom field. Moved read/write I/O * macros to DEFXX.C. * 12-Sep-96 LVS Removed packet request header pointers. + * 04 Aug 2003 macro Converted to the DMA API. */ #ifndef _DEFXX_H_ @@ -1467,6 +1462,11 @@ #endif /* #ifndef BIG_ENDIAN */ +/* Define TC PDQ CSR offset and length */ + +#define PI_TC_K_CSR_OFFSET 0x100000 +#define PI_TC_K_CSR_LEN 0x80 /* 128 bytes */ + /* Define EISA controller register offsets */ #define PI_ESIC_K_BURST_HOLDOFF 0x040 @@ -1634,6 +1634,7 @@ #define DFX_BUS_TYPE_PCI 0 /* type code for DEC FDDIcontroller/PCI */ #define DFX_BUS_TYPE_EISA 1 /* type code for DEC FDDIcontroller/EISA */ +#define DFX_BUS_TYPE_TC 2 /* type code for DEC FDDIcontroller/TURBOchannel */ #define DFX_FC_PRH2_PRH1_PRH0 0x54003820 /* Packet Request Header bytes + FC */ #define DFX_PRH0_BYTE 0x20 /* Packet Request Header byte 0 */ @@ -1704,17 +1705,19 @@ { /* Keep virtual and physical pointers to locked, physically contiguous memory */ - char *kmalloced; /* kfree this on unload */ + char *kmalloced; /* pci_free_consistent this on unload */ + dma_addr_t kmalloced_dma; + /* DMA handle for the above */ PI_DESCR_BLOCK *descr_block_virt; /* PDQ descriptor block virt address */ - u32 descr_block_phys; /* PDQ descriptor block phys address */ + dma_addr_t descr_block_phys; /* PDQ descriptor block phys address */ PI_DMA_CMD_REQ *cmd_req_virt; /* Command request buffer virt address */ - u32 cmd_req_phys; /* Command request buffer phys address */ + dma_addr_t cmd_req_phys; /* Command request buffer phys address */ PI_DMA_CMD_RSP *cmd_rsp_virt; /* Command response buffer virt address */ - u32 cmd_rsp_phys; /* Command response buffer phys address */ + dma_addr_t cmd_rsp_phys; /* Command response buffer phys address */ char *rcv_block_virt; /* LLC host receive queue buf blk virt */ - u32 rcv_block_phys; /* LLC host receive queue buf blk phys */ + dma_addr_t rcv_block_phys; /* LLC host receive queue buf blk phys */ PI_CONSUMER_BLOCK *cons_block_virt; /* PDQ consumer block virt address */ - u32 cons_block_phys; /* PDQ consumer block phys address */ + dma_addr_t cons_block_phys; /* PDQ consumer block phys address */ /* Keep local copies of Type 1 and Type 2 register data */ @@ -1758,8 +1761,9 @@ struct net_device *dev; /* pointer to device structure */ struct net_device *next; - u32 bus_type; /* bus type (0 == PCI, 1 == EISA) */ - u16 base_addr; /* base I/O address (same as dev->base_addr) */ + u32 bus_type; /* bus type (0 == PCI, 1 == EISA, 2 == TC) */ + long base_addr; /* base I/O address (same as dev->base_addr) */ + int slot; /* TC slot number */ struct pci_dev * pci_dev; u32 full_duplex_enb; /* FDDI Full Duplex enable (1 == on, 2 == off) */ u32 req_ttrt; /* requested TTRT value (in 80ns units) */ diff -Nur linux-2.4.32-rc1/drivers/net/hamradio/hdlcdrv.c linux-2.4.32-rc1.mips/drivers/net/hamradio/hdlcdrv.c --- linux-2.4.32-rc1/drivers/net/hamradio/hdlcdrv.c 2002-02-25 20:37:59.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/net/hamradio/hdlcdrv.c 2004-05-04 14:04:27.000000000 +0200 @@ -587,6 +587,8 @@ return -EINVAL; s = (struct hdlcdrv_state *)dev->priv; + netif_stop_queue(dev); + if (s->ops && s->ops->close) i = s->ops->close(dev); if (s->skb) diff -Nur linux-2.4.32-rc1/drivers/net/irda/au1k_ir.c linux-2.4.32-rc1.mips/drivers/net/irda/au1k_ir.c --- linux-2.4.32-rc1/drivers/net/irda/au1k_ir.c 2004-02-18 14:36:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/net/irda/au1k_ir.c 2005-02-03 07:35:29.000000000 +0100 @@ -81,10 +81,6 @@ #define RUN_AT(x) (jiffies + (x)) -#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) -static BCSR * const bcsr = (BCSR *)0xAE000000; -#endif - static spinlock_t ir_lock = SPIN_LOCK_UNLOCKED; /* diff -Nur linux-2.4.32-rc1/drivers/net/sgiseeq.c linux-2.4.32-rc1.mips/drivers/net/sgiseeq.c --- linux-2.4.32-rc1/drivers/net/sgiseeq.c 2005-01-19 15:09:56.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/net/sgiseeq.c 2005-09-23 16:35:27.000000000 +0200 @@ -24,16 +24,16 @@ #include #include #include +#include #include #include +#include #include #include #include #include "sgiseeq.h" -static char *version = "sgiseeq.c: David S. Miller (dm@engr.sgi.com)\n"; - static char *sgiseeqstr = "SGI Seeq8003"; /* @@ -113,9 +113,9 @@ static inline void hpc3_eth_reset(struct hpc3_ethregs *hregs) { - hregs->rx_reset = HPC3_ERXRST_CRESET | HPC3_ERXRST_CLRIRQ; + hregs->reset = HPC3_ERST_CRESET | HPC3_ERST_CLRIRQ; udelay(20); - hregs->rx_reset = 0; + hregs->reset = 0; } static inline void reset_hpc3_and_seeq(struct hpc3_ethregs *hregs, @@ -238,7 +238,6 @@ #define TSTAT_INIT_SEEQ (SEEQ_TCMD_IPT|SEEQ_TCMD_I16|SEEQ_TCMD_IC|SEEQ_TCMD_IUF) #define TSTAT_INIT_EDLC ((TSTAT_INIT_SEEQ) | SEEQ_TCMD_RB2) -#define RDMACFG_INIT (HPC3_ERXDCFG_FRXDC | HPC3_ERXDCFG_FEOP | HPC3_ERXDCFG_FIRQ) static int init_seeq(struct net_device *dev, struct sgiseeq_private *sp, struct sgiseeq_regs *sregs) @@ -260,8 +259,6 @@ sregs->tstat = TSTAT_INIT_SEEQ; } - hregs->rx_dconfig |= RDMACFG_INIT; - hregs->rx_ndptr = PHYSADDR(&sp->srings.rx_desc[0]); hregs->tx_ndptr = PHYSADDR(&sp->srings.tx_desc[0]); @@ -432,7 +429,7 @@ spin_lock(&sp->tx_lock); /* Ack the IRQ and set software state. */ - hregs->rx_reset = HPC3_ERXRST_CLRIRQ; + hregs->reset = HPC3_ERST_CLRIRQ; /* Always check for received packets. */ sgiseeq_rx(dev, sp, hregs, sregs); @@ -616,7 +613,7 @@ #define ALIGNED(x) ((((unsigned long)(x)) + 0xf) & ~(0xf)) -int sgiseeq_init(struct hpc3_regs* regs, int irq) +int sgiseeq_init(struct hpc3_regs* hpcregs, int irq, int has_eeprom) { struct net_device *dev; struct sgiseeq_private *sp; @@ -629,7 +626,7 @@ goto err_out; } /* Make private data page aligned */ - sp = (struct sgiseeq_private *) get_zeroed_page(GFP_KERNEL); + sp = (struct sgiseeq_private *) get_zeroed_page(GFP_KERNEL); if (!sp) { printk(KERN_ERR "Sgiseeq: Page alloc failed, aborting.\n"); err = -ENOMEM; @@ -644,7 +641,9 @@ #define EADDR_NVOFS 250 for (i = 0; i < 3; i++) { - unsigned short tmp = ip22_nvram_read(EADDR_NVOFS / 2 + i); + unsigned short tmp = has_eeprom ? + ip22_eeprom_read(&hpcregs->eeprom, EADDR_NVOFS / 2+i) : + ip22_nvram_read(EADDR_NVOFS / 2+i); dev->dev_addr[2 * i] = tmp >> 8; dev->dev_addr[2 * i + 1] = tmp & 0xff; @@ -654,8 +653,8 @@ gpriv = sp; gdev = dev; #endif - sp->sregs = (struct sgiseeq_regs *) &hpc3c0->eth_ext[0]; - sp->hregs = &hpc3c0->ethregs; + sp->sregs = (struct sgiseeq_regs *) &hpcregs->eth_ext[0]; + sp->hregs = &hpcregs->ethregs; sp->name = sgiseeqstr; sp->mode = SEEQ_RCMD_RBCAST; @@ -672,6 +671,11 @@ setup_rx_ring(sp->srings.rx_desc, SEEQ_RX_BUFFERS); setup_tx_ring(sp->srings.tx_desc, SEEQ_TX_BUFFERS); + /* Setup PIO and DMA transfer timing */ + sp->hregs->pconfig = 0x161; + sp->hregs->dconfig = HPC3_EDCFG_FIRQ | HPC3_EDCFG_FEOP | + HPC3_EDCFG_FRXDC | HPC3_EDCFG_PTO | 0x026; + /* Reset the chip. */ hpc3_eth_reset(sp->hregs); @@ -699,7 +703,7 @@ goto err_out_free_irq; } - printk(KERN_INFO "%s: SGI Seeq8003 ", dev->name); + printk(KERN_INFO "%s: %s ", dev->name, sgiseeqstr); for (i = 0; i < 6; i++) printk("%2.2x%c", dev->dev_addr[i], i == 5 ? '\n' : ':'); @@ -721,10 +725,22 @@ static int __init sgiseeq_probe(void) { - printk(version); + unsigned int tmp, ret1, ret2 = 0; /* On board adapter on 1st HPC is always present */ - return sgiseeq_init(hpc3c0, SGI_ENET_IRQ); + ret1 = sgiseeq_init(hpc3c0, SGI_ENET_IRQ, 0); + /* Let's see if second HPC is there */ + if (!(ip22_is_fullhouse()) && + get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1]) == 0) { + sgimc->giopar |= SGIMC_GIOPAR_MASTEREXP1 | + SGIMC_GIOPAR_EXP164 | + SGIMC_GIOPAR_HPC264; + hpc3c1->pbus_piocfg[0][0] = 0x3ffff; + /* interrupt/config register on Challenge S Mezz board */ + hpc3c1->pbus_extregs[0][0] = 0x30; + ret2 = sgiseeq_init(hpc3c1, SGI_GIO_0_IRQ, 1); + } + return (ret1 & ret2) ? ret1 : 0; } static void __exit sgiseeq_exit(void) @@ -747,4 +763,6 @@ module_init(sgiseeq_probe); module_exit(sgiseeq_exit); +MODULE_DESCRIPTION("SGI Seeq 8003 driver"); +MODULE_AUTHOR("David S. Miller"); MODULE_LICENSE("GPL"); diff -Nur linux-2.4.32-rc1/drivers/pci/pci.c linux-2.4.32-rc1.mips/drivers/pci/pci.c --- linux-2.4.32-rc1/drivers/pci/pci.c 2004-11-17 12:54:21.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/pci/pci.c 2004-11-19 01:28:41.000000000 +0100 @@ -1281,11 +1281,17 @@ { unsigned int buses; unsigned short cr; + unsigned short bctl; struct pci_bus *child; int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS); pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses); DBG("Scanning behind PCI bridge %s, config %06x, pass %d\n", dev->slot_name, buses & 0xffffff, pass); + /* Disable MasterAbortMode during probing to avoid reporting + of bus errors (in some architectures) */ + pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl); + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, + bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT); if ((buses & 0xffff00) && !pcibios_assign_all_busses()) { /* * Bus already configured by firmware, process it in the first @@ -1351,6 +1357,7 @@ pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max); pci_write_config_word(dev, PCI_COMMAND, cr); } + pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl); sprintf(child->name, (is_cardbus ? "PCI CardBus #%02x" : "PCI Bus #%02x"), child->number); return max; } diff -Nur linux-2.4.32-rc1/drivers/pcmcia/au1000_db1x00.c linux-2.4.32-rc1.mips/drivers/pcmcia/au1000_db1x00.c --- linux-2.4.32-rc1/drivers/pcmcia/au1000_db1x00.c 2005-01-19 15:09:57.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/pcmcia/au1000_db1x00.c 2005-02-03 07:35:30.000000000 +0100 @@ -1,6 +1,6 @@ /* * - * Alchemy Semi Db1x00 boards specific pcmcia routines. + * AMD Alchemy DUAL-SLOT Db1x00 boards' specific pcmcia routines. * * Copyright 2002 MontaVista Software Inc. * Author: MontaVista Software, Inc. @@ -54,9 +54,20 @@ #include #include +#if defined(CONFIG_MIPS_PB1200) +#include +#elif defined(CONFIG_MIPS_DB1200) +#include +#else #include +#endif -static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) + +/* VPP/VCC */ +#define SET_VCC_VPP(VCC, VPP, SLOT)\ + ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) static int db1x00_pcmcia_init(struct pcmcia_init *init) { @@ -76,7 +87,7 @@ db1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state) { u32 inserted; - unsigned char vs; + u16 vs; if(sock > PCMCIA_MAX_SOCK) return -1; @@ -87,11 +98,11 @@ if (sock == 0) { vs = bcsr->status & 0x3; - inserted = !(bcsr->status & (1<<4)); + inserted = BOARD_CARD_INSERTED(0); } else { vs = (bcsr->status & 0xC)>>2; - inserted = !(bcsr->status & (1<<5)); + inserted = BOARD_CARD_INSERTED(1); } DEBUG(KERN_DEBUG "db1x00 socket %d: inserted %d, vs %d\n", @@ -144,16 +155,9 @@ if(info->sock > PCMCIA_MAX_SOCK) return -1; if(info->sock == 0) -#ifdef CONFIG_MIPS_DB1550 - info->irq = AU1000_GPIO_3; + info->irq = BOARD_PC0_INT; else - info->irq = AU1000_GPIO_5; -#else - info->irq = AU1000_GPIO_2; - else - info->irq = AU1000_GPIO_5; -#endif - + info->irq = BOARD_PC1_INT; return 0; } diff -Nur linux-2.4.32-rc1/drivers/pcmcia/Config.in linux-2.4.32-rc1.mips/drivers/pcmcia/Config.in --- linux-2.4.32-rc1/drivers/pcmcia/Config.in 2004-02-18 14:36:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/pcmcia/Config.in 2004-02-22 06:21:34.000000000 +0100 @@ -30,16 +30,14 @@ dep_tristate ' M8xx support' CONFIG_PCMCIA_M8XX $CONFIG_PCMCIA fi if [ "$CONFIG_SOC_AU1X00" = "y" ]; then - dep_tristate ' Au1x00 PCMCIA support' CONFIG_PCMCIA_AU1X00 $CONFIG_PCMCIA - if [ "$CONFIG_PCMCIA_AU1X00" != "n" ]; then - bool ' Pb1x00 board support' CONFIG_PCMCIA_PB1X00 - bool ' Db1x00 board support' CONFIG_PCMCIA_DB1X00 - bool ' XXS1500 board support' CONFIG_PCMCIA_XXS1500 - fi + dep_tristate ' Au1x00 PCMCIA support' CONFIG_PCMCIA_AU1X00 $CONFIG_PCMCIA fi if [ "$CONFIG_SIBYTE_SB1xxx_SOC" = "y" ]; then dep_bool ' SiByte PCMCIA support' CONFIG_PCMCIA_SIBYTE $CONFIG_PCMCIA $CONFIG_BLK_DEV_IDE_SIBYTE fi + if [ "$CONFIG_VRC4171" = "y" -o "$CONFIG_VRC4171" = "m" ]; then + dep_tristate ' NEC VRC4171 Card Controllers support' CONFIG_PCMCIA_VRC4171 $CONFIG_PCMCIA + fi if [ "$CONFIG_VRC4173" = "y" -o "$CONFIG_VRC4173" = "m" ]; then dep_tristate ' NEC VRC4173 CARDU support' CONFIG_PCMCIA_VRC4173 $CONFIG_PCMCIA fi diff -Nur linux-2.4.32-rc1/drivers/pcmcia/Makefile linux-2.4.32-rc1.mips/drivers/pcmcia/Makefile --- linux-2.4.32-rc1/drivers/pcmcia/Makefile 2004-02-18 14:36:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/pcmcia/Makefile 2005-02-03 07:35:30.000000000 +0100 @@ -61,9 +61,18 @@ obj-$(CONFIG_PCMCIA_AU1X00) += au1x00_ss.o au1000_ss-objs-y := au1000_generic.o -au1000_ss-objs-$(CONFIG_PCMCIA_PB1X00) += au1000_pb1x00.o -au1000_ss-objs-$(CONFIG_PCMCIA_DB1X00) += au1000_db1x00.o -au1000_ss-objs-$(CONFIG_PCMCIA_XXS1500) += au1000_xxs1500.o +au1000_ss-objs-$(CONFIG_MIPS_PB1000) += au1000_pb1x00.o +au1000_ss-objs-$(CONFIG_MIPS_PB1100) += au1000_pb1x00.o +au1000_ss-objs-$(CONFIG_MIPS_PB1500) += au1000_pb1x00.o +au1000_ss-objs-$(CONFIG_MIPS_PB1550) += au1000_pb1550.o +au1000_ss-objs-$(CONFIG_MIPS_PB1200) += au1000_db1x00.o +au1000_ss-objs-$(CONFIG_MIPS_DB1000) += au1000_db1x00.o +au1000_ss-objs-$(CONFIG_MIPS_DB1100) += au1000_db1x00.o +au1000_ss-objs-$(CONFIG_MIPS_DB1500) += au1000_db1x00.o +au1000_ss-objs-$(CONFIG_MIPS_DB1550) += au1000_db1x00.o +au1000_ss-objs-$(CONFIG_MIPS_DB1200) += au1000_db1x00.o +au1000_ss-objs-$(CONFIG_MIPS_HYDROGEN3) += au1000_hydrogen3.o +au1000_ss-objs-$(CONFIG_MIPS_XXS1500) += au1000_xxs1500.o obj-$(CONFIG_PCMCIA_SA1100) += sa1100_cs.o obj-$(CONFIG_PCMCIA_M8XX) += m8xx_pcmcia.o @@ -89,6 +98,7 @@ sa1100_cs-objs-$(CONFIG_SA1100_XP860) += sa1100_xp860.o sa1111_generic.o sa1100_cs-objs-$(CONFIG_SA1100_YOPY) += sa1100_yopy.o +obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o include $(TOPDIR)/Rules.make diff -Nur linux-2.4.32-rc1/drivers/pcmcia/vrc4171_card.c linux-2.4.32-rc1.mips/drivers/pcmcia/vrc4171_card.c --- linux-2.4.32-rc1/drivers/pcmcia/vrc4171_card.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/pcmcia/vrc4171_card.c 2004-01-19 16:54:58.000000000 +0100 @@ -0,0 +1,886 @@ +/* + * vrc4171_card.c, NEC VRC4171 Card Controller driver for Socket Services. + * + * Copyright (C) 2003 Yoichi Yuasa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include "i82365.h" + +MODULE_DESCRIPTION("NEC VRC4171 Card Controllers driver for Socket Services"); +MODULE_AUTHOR("Yoichi Yuasa "); +MODULE_LICENSE("GPL"); + +#define CARD_MAX_SLOTS 2 +#define CARD_SLOTA 0 +#define CARD_SLOTB 1 +#define CARD_SLOTB_OFFSET 0x40 + +#define CARD_MEM_START 0x10000000 +#define CARD_MEM_END 0x13ffffff +#define CARD_MAX_MEM_OFFSET 0x3ffffff +#define CARD_MAX_MEM_SPEED 1000 + +#define CARD_CONTROLLER_INDEX 0x03e0 +#define CARD_CONTROLLER_DATA 0x03e1 +#define CARD_CONTROLLER_SIZE 2 + /* Power register */ + #define VPP_GET_VCC 0x01 + #define POWER_ENABLE 0x10 + #define CARD_VOLTAGE_SENSE 0x1f + #define VCC_3VORXV_CAPABLE 0x00 + #define VCC_XV_ONLY 0x01 + #define VCC_3V_CAPABLE 0x02 + #define VCC_5V_ONLY 0x03 + #define CARD_VOLTAGE_SELECT 0x2f + #define VCC_3V 0x01 + #define VCC_5V 0x00 + #define VCC_XV 0x02 + #define VCC_STATUS_3V 0x02 + #define VCC_STATUS_5V 0x01 + #define VCC_STATUS_XV 0x03 + #define GLOBAL_CONTROL 0x1e + #define EXWRBK 0x04 + #define IRQPM_EN 0x08 + #define CLRPMIRQ 0x10 + +#define IO_MAX_MAPS 2 +#define MEM_MAX_MAPS 5 + +enum { + SLOTB_PROBE = 0, + SLOTB_NOPROBE_IO, + SLOTB_NOPROBE_MEM, + SLOTB_NOPROBE_ALL +}; + +typedef struct vrc4171_socket { + int noprobe; + void (*handler)(void *, unsigned int); + void *info; + socket_cap_t cap; + spinlock_t event_lock; + uint16_t events; + struct socket_info_t *pcmcia_socket; + struct tq_struct tq_task; + char name[24]; + int csc_irq; + int io_irq; +} vrc4171_socket_t; + +static vrc4171_socket_t vrc4171_sockets[CARD_MAX_SLOTS]; +static int vrc4171_slotb = SLOTB_IS_NONE; +static unsigned int vrc4171_irq; +static uint16_t vrc4171_irq_mask = 0xdeb8; + +extern struct socket_info_t *pcmcia_register_socket(int slot, + struct pccard_operations *vtable, + int use_bus_pm); +extern void pcmcia_unregister_socket(struct socket_info_t *s); + +static inline uint8_t exca_read_byte(int slot, uint8_t index) +{ + if (slot == CARD_SLOTB) + index += CARD_SLOTB_OFFSET; + + outb(index, CARD_CONTROLLER_INDEX); + return inb(CARD_CONTROLLER_DATA); +} + +static inline uint16_t exca_read_word(int slot, uint8_t index) +{ + uint16_t data; + + if (slot == CARD_SLOTB) + index += CARD_SLOTB_OFFSET; + + outb(index++, CARD_CONTROLLER_INDEX); + data = inb(CARD_CONTROLLER_DATA); + + outb(index, CARD_CONTROLLER_INDEX); + data |= ((uint16_t)inb(CARD_CONTROLLER_DATA)) << 8; + + return data; +} + +static inline uint8_t exca_write_byte(int slot, uint8_t index, uint8_t data) +{ + if (slot == CARD_SLOTB) + index += CARD_SLOTB_OFFSET; + + outb(index, CARD_CONTROLLER_INDEX); + outb(data, CARD_CONTROLLER_DATA); + + return data; +} + +static inline uint16_t exca_write_word(int slot, uint8_t index, uint16_t data) +{ + if (slot == CARD_SLOTB) + index += CARD_SLOTB_OFFSET; + + outb(index++, CARD_CONTROLLER_INDEX); + outb(data, CARD_CONTROLLER_DATA); + + outb(index, CARD_CONTROLLER_INDEX); + outb((uint8_t)(data >> 8), CARD_CONTROLLER_DATA); + + return data; +} + +static inline int search_nonuse_irq(void) +{ + int i; + + for (i = 0; i < 16; i++) { + if (vrc4171_irq_mask & (1 << i)) { + vrc4171_irq_mask &= ~(1 << i); + return i; + } + } + + return -1; +} + +static int pccard_init(unsigned int slot) +{ + vrc4171_socket_t *socket = &vrc4171_sockets[slot]; + + socket->cap.features |= SS_CAP_PCCARD | SS_CAP_PAGE_REGS; + socket->cap.irq_mask = 0; + socket->cap.pci_irq = vrc4171_irq; + socket->cap.map_size = 0x1000; + socket->events = 0; + spin_lock_init(socket->event_lock); + socket->csc_irq = search_nonuse_irq(); + socket->io_irq = search_nonuse_irq(); + + return 0; +} + +static int pccard_suspend(unsigned int slot) +{ + return -EINVAL; +} + +static int pccard_register_callback(unsigned int slot, + void (*handler)(void *, unsigned int), + void *info) +{ + vrc4171_socket_t *socket; + + if (slot >= CARD_MAX_SLOTS) + return -EINVAL; + + socket = &vrc4171_sockets[slot]; + + socket->handler = handler; + socket->info = info; + + if (handler) + MOD_INC_USE_COUNT; + else + MOD_DEC_USE_COUNT; + + return 0; +} + +static int pccard_inquire_socket(unsigned int slot, socket_cap_t *cap) +{ + vrc4171_socket_t *socket; + + if (slot >= CARD_MAX_SLOTS || cap == NULL) + return -EINVAL; + + socket = &vrc4171_sockets[slot]; + + *cap = socket->cap; + + return 0; +} + +static int pccard_get_status(unsigned int slot, u_int *value) +{ + uint8_t status, sense; + u_int val = 0; + + if (slot >= CARD_MAX_SLOTS || value == NULL) + return -EINVAL; + + status = exca_read_byte(slot, I365_STATUS); + if (exca_read_byte(slot, I365_INTCTL) & I365_PC_IOCARD) { + if (status & I365_CS_STSCHG) + val |= SS_STSCHG; + } else { + if (!(status & I365_CS_BVD1)) + val |= SS_BATDEAD; + else if ((status & (I365_CS_BVD1 | I365_CS_BVD2)) == I365_CS_BVD1) + val |= SS_BATWARN; + } + if ((status & I365_CS_DETECT) == I365_CS_DETECT) + val |= SS_DETECT; + if (status & I365_CS_WRPROT) + val |= SS_WRPROT; + if (status & I365_CS_READY) + val |= SS_READY; + if (status & I365_CS_POWERON) + val |= SS_POWERON; + + sense = exca_read_byte(slot, CARD_VOLTAGE_SENSE); + switch (sense) { + case VCC_3VORXV_CAPABLE: + val |= SS_3VCARD | SS_XVCARD; + break; + case VCC_XV_ONLY: + val |= SS_XVCARD; + break; + case VCC_3V_CAPABLE: + val |= SS_3VCARD; + break; + default: + /* 5V only */ + break; + } + + *value = val; + + return 0; +} + +static inline u_char get_Vcc_value(uint8_t voltage) +{ + switch (voltage) { + case VCC_STATUS_3V: + return 33; + case VCC_STATUS_5V: + return 50; + default: + break; + } + + return 0; +} + +static inline u_char get_Vpp_value(uint8_t power, u_char Vcc) +{ + if ((power & 0x03) == 0x01 || (power & 0x03) == 0x02) + return Vcc; + + return 0; +} + +static int pccard_get_socket(unsigned int slot, socket_state_t *state) +{ + vrc4171_socket_t *socket; + uint8_t power, voltage, control, cscint; + + if (slot >= CARD_MAX_SLOTS || state == NULL) + return -EINVAL; + + socket = &vrc4171_sockets[slot]; + + power = exca_read_byte(slot, I365_POWER); + voltage = exca_read_byte(slot, CARD_VOLTAGE_SELECT); + + state->Vcc = get_Vcc_value(voltage); + state->Vpp = get_Vpp_value(power, state->Vcc); + + state->flags = 0; + if (power & POWER_ENABLE) + state->flags |= SS_PWR_AUTO; + if (power & I365_PWR_OUT) + state->flags |= SS_OUTPUT_ENA; + + control = exca_read_byte(slot, I365_INTCTL); + if (control & I365_PC_IOCARD) + state->flags |= SS_IOCARD; + if (!(control & I365_PC_RESET)) + state->flags |= SS_RESET; + + cscint = exca_read_byte(slot, I365_CSCINT); + state->csc_mask = 0; + if (state->flags & SS_IOCARD) { + if (cscint & I365_CSC_STSCHG) + state->flags |= SS_STSCHG; + } else { + if (cscint & I365_CSC_BVD1) + state->csc_mask |= SS_BATDEAD; + if (cscint & I365_CSC_BVD2) + state->csc_mask |= SS_BATWARN; + } + if (cscint & I365_CSC_READY) + state->csc_mask |= SS_READY; + if (cscint & I365_CSC_DETECT) + state->csc_mask |= SS_DETECT; + + return 0; +} + +static inline uint8_t set_Vcc_value(u_char Vcc) +{ + switch (Vcc) { + case 33: + return VCC_3V; + case 50: + return VCC_5V; + } + + /* Small voltage is chosen for safety. */ + return VCC_3V; +} + +static int pccard_set_socket(unsigned int slot, socket_state_t *state) +{ + vrc4171_socket_t *socket; + uint8_t voltage, power, control, cscint; + + if (slot >= CARD_MAX_SLOTS || + (state->Vpp != state->Vcc && state->Vpp != 0) || + (state->Vcc != 50 && state->Vcc != 33 && state->Vcc != 0)) + return -EINVAL; + + socket = &vrc4171_sockets[slot]; + + spin_lock_irq(&socket->event_lock); + + voltage = set_Vcc_value(state->Vcc); + exca_write_byte(slot, CARD_VOLTAGE_SELECT, voltage); + + power = POWER_ENABLE; + if (state->Vpp == state->Vcc) + power |= VPP_GET_VCC; + if (state->flags & SS_OUTPUT_ENA) + power |= I365_PWR_OUT; + exca_write_byte(slot, I365_POWER, power); + + control = 0; + if (state->io_irq != 0) + control |= socket->io_irq; + if (state->flags & SS_IOCARD) + control |= I365_PC_IOCARD; + if (state->flags & SS_RESET) + control &= ~I365_PC_RESET; + else + control |= I365_PC_RESET; + exca_write_byte(slot, I365_INTCTL, control); + + cscint = 0; + exca_write_byte(slot, I365_CSCINT, cscint); + exca_read_byte(slot, I365_CSC); /* clear CardStatus change */ + if (state->csc_mask != 0) + cscint |= socket->csc_irq << 8; + if (state->flags & SS_IOCARD) { + if (state->csc_mask & SS_STSCHG) + cscint |= I365_CSC_STSCHG; + } else { + if (state->csc_mask & SS_BATDEAD) + cscint |= I365_CSC_BVD1; + if (state->csc_mask & SS_BATWARN) + cscint |= I365_CSC_BVD2; + } + if (state->csc_mask & SS_READY) + cscint |= I365_CSC_READY; + if (state->csc_mask & SS_DETECT) + cscint |= I365_CSC_DETECT; + exca_write_byte(slot, I365_CSCINT, cscint); + + spin_unlock_irq(&socket->event_lock); + + return 0; +} + +static int pccard_get_io_map(unsigned int slot, struct pccard_io_map *io) +{ + vrc4171_socket_t *socket; + uint8_t ioctl, addrwin; + u_char map; + + if (slot >= CARD_MAX_SLOTS || io == NULL || + io->map >= IO_MAX_MAPS) + return -EINVAL; + + socket = &vrc4171_sockets[slot]; + map = io->map; + + io->start = exca_read_word(slot, I365_IO(map)+I365_W_START); + io->stop = exca_read_word(slot, I365_IO(map)+I365_W_STOP); + + ioctl = exca_read_byte(slot, I365_IOCTL); + if (io->flags & I365_IOCTL_WAIT(map)) + io->speed = 1; + else + io->speed = 0; + + io->flags = 0; + if (ioctl & I365_IOCTL_16BIT(map)) + io->flags |= MAP_16BIT; + if (ioctl & I365_IOCTL_IOCS16(map)) + io->flags |= MAP_AUTOSZ; + if (ioctl & I365_IOCTL_0WS(map)) + io->flags |= MAP_0WS; + + addrwin = exca_read_byte(slot, I365_ADDRWIN); + if (addrwin & I365_ENA_IO(map)) + io->flags |= MAP_ACTIVE; + + return 0; +} + +static int pccard_set_io_map(unsigned int slot, struct pccard_io_map *io) +{ + vrc4171_socket_t *socket; + uint8_t ioctl, addrwin; + u_char map; + + if (slot >= CARD_MAX_SLOTS || + io == NULL || io->map >= IO_MAX_MAPS || + io->start > 0xffff || io->stop > 0xffff || io->start > io->stop) + return -EINVAL; + + socket = &vrc4171_sockets[slot]; + map = io->map; + + addrwin = exca_read_byte(slot, I365_ADDRWIN); + if (addrwin & I365_ENA_IO(map)) { + addrwin &= ~I365_ENA_IO(map); + exca_write_byte(slot, I365_ADDRWIN, addrwin); + } + + exca_write_word(slot, I365_IO(map)+I365_W_START, io->start); + exca_write_word(slot, I365_IO(map)+I365_W_STOP, io->stop); + + ioctl = 0; + if (io->speed > 0) + ioctl |= I365_IOCTL_WAIT(map); + if (io->flags & MAP_16BIT) + ioctl |= I365_IOCTL_16BIT(map); + if (io->flags & MAP_AUTOSZ) + ioctl |= I365_IOCTL_IOCS16(map); + if (io->flags & MAP_0WS) + ioctl |= I365_IOCTL_0WS(map); + exca_write_byte(slot, I365_IOCTL, ioctl); + + if (io->flags & MAP_ACTIVE) { + addrwin |= I365_ENA_IO(map); + exca_write_byte(slot, I365_ADDRWIN, addrwin); + } + + return 0; +} + +static int pccard_get_mem_map(unsigned int slot, struct pccard_mem_map *mem) +{ + vrc4171_socket_t *socket; + uint8_t addrwin; + u_long start, stop; + u_int offset; + u_char map; + + if (slot >= CARD_MAX_SLOTS || mem == NULL || mem->map >= MEM_MAX_MAPS) + return -EINVAL; + + socket = &vrc4171_sockets[slot]; + map = mem->map; + + mem->flags = 0; + mem->speed = 0; + + addrwin = exca_read_byte(slot, I365_ADDRWIN); + if (addrwin & I365_ENA_MEM(map)) + mem->flags |= MAP_ACTIVE; + + start = exca_read_word(slot, I365_MEM(map)+I365_W_START); + if (start & I365_MEM_16BIT) + mem->flags |= MAP_16BIT; + mem->sys_start = (start & 0x3fffUL) << 12; + + stop = exca_read_word(slot, I365_MEM(map)+I365_W_STOP); + if (start & I365_MEM_WS0) + mem->speed += 1; + if (start & I365_MEM_WS1) + mem->speed += 2; + mem->sys_stop = ((stop & 0x3fffUL) << 12) + 0xfffUL; + + offset = exca_read_word(slot, I365_MEM(map)+I365_W_OFF); + if (offset & I365_MEM_REG) + mem->flags |= MAP_ATTRIB; + if (offset & I365_MEM_WRPROT) + mem->flags |= MAP_WRPROT; + mem->card_start = (offset & 0x3fffUL) << 12; + + mem->sys_start += CARD_MEM_START; + mem->sys_stop += CARD_MEM_START; + + return 0; +} + +static int pccard_set_mem_map(unsigned int slot, struct pccard_mem_map *mem) +{ + vrc4171_socket_t *socket; + uint16_t start, stop, offset; + uint8_t addrwin; + u_char map; + + if (slot >= CARD_MAX_SLOTS || + mem == NULL || mem->map >= MEM_MAX_MAPS || + mem->sys_start < CARD_MEM_START || mem->sys_start > CARD_MEM_END || + mem->sys_stop < CARD_MEM_START || mem->sys_stop > CARD_MEM_END || + mem->sys_start > mem->sys_stop || + mem->card_start > CARD_MAX_MEM_OFFSET || + mem->speed > CARD_MAX_MEM_SPEED) + return -EINVAL; + + socket = &vrc4171_sockets[slot]; + map = mem->map; + + addrwin = exca_read_byte(slot, I365_ADDRWIN); + if (addrwin & I365_ENA_MEM(map)) { + addrwin &= ~I365_ENA_MEM(map); + exca_write_byte(slot, I365_ADDRWIN, addrwin); + } + + start = (mem->sys_start >> 12) & 0x3fff; + if (mem->flags & MAP_16BIT) + start |= I365_MEM_16BIT; + exca_write_word(slot, I365_MEM(map)+I365_W_START, start); + + stop = (mem->sys_stop >> 12) & 0x3fff; + switch (mem->speed) { + case 0: + break; + case 1: + stop |= I365_MEM_WS0; + break; + case 2: + stop |= I365_MEM_WS1; + break; + default: + stop |= I365_MEM_WS0 | I365_MEM_WS1; + break; + } + exca_write_word(slot, I365_MEM(map)+I365_W_STOP, stop); + + offset = (mem->card_start >> 12) & 0x3fff; + if (mem->flags & MAP_ATTRIB) + offset |= I365_MEM_REG; + if (mem->flags & MAP_WRPROT) + offset |= I365_MEM_WRPROT; + exca_write_word(slot, I365_MEM(map)+I365_W_OFF, offset); + + if (mem->flags & MAP_ACTIVE) { + addrwin |= I365_ENA_MEM(map); + exca_write_byte(slot, I365_ADDRWIN, addrwin); + } + + return 0; +} + +static void pccard_proc_setup(unsigned int slot, struct proc_dir_entry *base) +{ +} + +static struct pccard_operations vrc4171_pccard_operations = { + .init = pccard_init, + .suspend = pccard_suspend, + .register_callback = pccard_register_callback, + .inquire_socket = pccard_inquire_socket, + .get_status = pccard_get_status, + .get_socket = pccard_get_socket, + .set_socket = pccard_set_socket, + .get_io_map = pccard_get_io_map, + .set_io_map = pccard_set_io_map, + .get_mem_map = pccard_get_mem_map, + .set_mem_map = pccard_set_mem_map, + .proc_setup = pccard_proc_setup, +}; + +static void pccard_bh(void *data) +{ + vrc4171_socket_t *socket = (vrc4171_socket_t *)data; + uint16_t events; + + spin_lock_irq(&socket->event_lock); + events = socket->events; + socket->events = 0; + spin_unlock_irq(&socket->event_lock); + + if (socket->handler) + socket->handler(socket->info, events); +} + +static inline uint16_t get_events(int slot) +{ + uint16_t events = 0; + uint8_t status, csc; + + status = exca_read_byte(slot, I365_STATUS); + csc = exca_read_byte(slot, I365_CSC); + + if (exca_read_byte(slot, I365_INTCTL) & I365_PC_IOCARD) { + if ((csc & I365_CSC_STSCHG) && (status & I365_CS_STSCHG)) + events |= SS_STSCHG; + } else { + if (csc & (I365_CSC_BVD1 | I365_CSC_BVD2)) { + if (!(status & I365_CS_BVD1)) + events |= SS_BATDEAD; + else if ((status & (I365_CS_BVD1 | I365_CS_BVD2)) == I365_CS_BVD1) + events |= SS_BATWARN; + } + } + if ((csc & I365_CSC_READY) && (status & I365_CS_READY)) + events |= SS_READY; + if ((csc & I365_CSC_DETECT) && ((status & I365_CS_DETECT) == I365_CS_DETECT)) + events |= SS_DETECT; + + return events; +} + +static void pccard_status_change(int slot, vrc4171_socket_t *socket) +{ + uint16_t events; + + socket->tq_task.routine = pccard_bh; + socket->tq_task.data = socket; + + events = get_events(slot); + if (events) { + spin_lock(&socket->event_lock); + socket->events |= events; + spin_unlock(&socket->event_lock); + schedule_task(&socket->tq_task); + } +} + +static void pccard_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + vrc4171_socket_t *socket; + uint16_t status; + + status = vrc4171_get_irq_status(); + if (status & IRQ_A) { + socket = &vrc4171_sockets[CARD_SLOTA]; + if (socket->noprobe == SLOTB_PROBE) { + if (status & (1 << socket->csc_irq)) + pccard_status_change(CARD_SLOTA, socket); + } + } + + if (status & IRQ_B) { + socket = &vrc4171_sockets[CARD_SLOTB]; + if (socket->noprobe == SLOTB_PROBE) { + if (status & (1 << socket->csc_irq)) + pccard_status_change(CARD_SLOTB, socket); + } + } +} + +static inline void reserve_using_irq(int slot) +{ + unsigned int irq; + + irq = exca_read_byte(slot, I365_INTCTL); + irq &= 0x0f; + vrc4171_irq_mask &= ~(1 << irq); + + irq = exca_read_byte(slot, I365_CSCINT); + irq = (irq & 0xf0) >> 4; + vrc4171_irq_mask &= ~(1 << irq); +} + +static int __devinit vrc4171_add_socket(int slot) +{ + vrc4171_socket_t *socket; + + if (slot >= CARD_MAX_SLOTS) + return -EINVAL; + + socket = &vrc4171_sockets[slot]; + if (socket->noprobe != SLOTB_PROBE) { + uint8_t addrwin; + + switch (socket->noprobe) { + case SLOTB_NOPROBE_MEM: + addrwin = exca_read_byte(slot, I365_ADDRWIN); + addrwin &= 0x1f; + exca_write_byte(slot, I365_ADDRWIN, addrwin); + break; + case SLOTB_NOPROBE_IO: + addrwin = exca_read_byte(slot, I365_ADDRWIN); + addrwin &= 0xc0; + exca_write_byte(slot, I365_ADDRWIN, addrwin); + break; + default: + break; + } + + reserve_using_irq(slot); + + return 0; + } + + sprintf(socket->name, "NEC VRC4171 Card Slot %1c", 'A' + slot); + + socket->pcmcia_socket = pcmcia_register_socket(slot, &vrc4171_pccard_operations, 1); + if (socket->pcmcia_socket == NULL) + return -ENOMEM; + + exca_write_byte(slot, I365_ADDRWIN, 0); + + exca_write_byte(slot, GLOBAL_CONTROL, 0); + + return 0; +} + +static void vrc4171_remove_socket(int slot) +{ + vrc4171_socket_t *socket; + + if (slot >= CARD_MAX_SLOTS) + return; + + socket = &vrc4171_sockets[slot]; + + if (socket->pcmcia_socket != NULL) { + pcmcia_unregister_socket(socket->pcmcia_socket); + socket->pcmcia_socket = NULL; + } +} + +static int __devinit vrc4171_card_setup(char *options) +{ + if (options == NULL || *options == '\0') + return 0; + + if (strncmp(options, "irq:", 4) == 0) { + int irq; + options += 4; + irq = simple_strtoul(options, &options, 0); + if (irq >= 0 && irq < NR_IRQS) + vrc4171_irq = irq; + + if (*options != ',') + return 0; + options++; + } + + if (strncmp(options, "slota:", 6) == 0) { + options += 6; + if (*options != '\0') { + if (strncmp(options, "noprobe", 7) == 0) { + vrc4171_sockets[CARD_SLOTA].noprobe = 1; + options += 7; + } + + if (*options != ',') + return 0; + options++; + } else + return 0; + + } + + if (strncmp(options, "slotb:", 6) == 0) { + options += 6; + if (*options != '\0') { + if (strncmp(options, "pccard", 6) == 0) { + vrc4171_slotb = SLOTB_IS_PCCARD; + options += 6; + } else if (strncmp(options, "cf", 2) == 0) { + vrc4171_slotb = SLOTB_IS_CF; + options += 2; + } else if (strncmp(options, "flashrom", 8) == 0) { + vrc4171_slotb = SLOTB_IS_FLASHROM; + options += 8; + } else if (strncmp(options, "none", 4) == 0) { + vrc4171_slotb = SLOTB_IS_NONE; + options += 4; + } + + if (*options != ',') + return 0; + options++; + + if ( strncmp(options, "memnoprobe", 10) == 0) + vrc4171_sockets[CARD_SLOTB].noprobe = SLOTB_NOPROBE_MEM; + if ( strncmp(options, "ionoprobe", 9) == 0) + vrc4171_sockets[CARD_SLOTB].noprobe = SLOTB_NOPROBE_IO; + if ( strncmp(options, "noprobe", 7) == 0) + vrc4171_sockets[CARD_SLOTB].noprobe = SLOTB_NOPROBE_ALL; + } + } + + return 0; +} + +__setup("vrc4171_card=", vrc4171_card_setup); + +static int __devinit vrc4171_card_init(void) +{ + int retval, slot; + + vrc4171_set_multifunction_pin(vrc4171_slotb); + + if (request_region(CARD_CONTROLLER_INDEX, CARD_CONTROLLER_SIZE, + "NEC VRC4171 Card Controller") == NULL) + return -EBUSY; + + for (slot = 0; slot < CARD_MAX_SLOTS; slot++) { + if (slot == CARD_SLOTB && vrc4171_slotb == SLOTB_IS_NONE) + break; + + retval = vrc4171_add_socket(slot); + if (retval != 0) + return retval; + } + + retval = request_irq(vrc4171_irq, pccard_interrupt, SA_SHIRQ, + "NEC VRC4171 Card Controller", vrc4171_sockets); + if (retval < 0) { + for (slot = 0; slot < CARD_MAX_SLOTS; slot++) + vrc4171_remove_socket(slot); + + return retval; + } + + printk(KERN_INFO "NEC VRC4171 Card Controller, connected to IRQ %d\n", vrc4171_irq); + + return 0; +} + +static void __devexit vrc4171_card_exit(void) +{ + int slot; + + for (slot = 0; slot < CARD_MAX_SLOTS; slot++) + vrc4171_remove_socket(slot); + + release_region(CARD_CONTROLLER_INDEX, CARD_CONTROLLER_SIZE); +} + +module_init(vrc4171_card_init); +module_exit(vrc4171_card_exit); diff -Nur linux-2.4.32-rc1/drivers/scsi/NCR53C9x.h linux-2.4.32-rc1.mips/drivers/scsi/NCR53C9x.h --- linux-2.4.32-rc1/drivers/scsi/NCR53C9x.h 2004-02-18 14:36:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/scsi/NCR53C9x.h 2003-12-15 19:19:51.000000000 +0100 @@ -144,12 +144,7 @@ #ifndef MULTIPLE_PAD_SIZES -#ifdef CONFIG_CPU_HAS_WB -#include -#define esp_write(__reg, __val) do{(__reg) = (__val); wbflush();} while(0) -#else -#define esp_write(__reg, __val) ((__reg) = (__val)) -#endif +#define esp_write(__reg, __val) do{(__reg) = (__val); iob();} while(0) #define esp_read(__reg) (__reg) struct ESP_regs { diff -Nur linux-2.4.32-rc1/drivers/sound/au1550_i2s.c linux-2.4.32-rc1.mips/drivers/sound/au1550_i2s.c --- linux-2.4.32-rc1/drivers/sound/au1550_i2s.c 2005-01-19 15:10:04.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/sound/au1550_i2s.c 2005-02-08 08:07:50.000000000 +0100 @@ -41,6 +41,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. * */ + #include #include #include @@ -62,7 +63,45 @@ #include #include #include + +#if defined(CONFIG_SOC_AU1550) #include +#endif + +#if defined(CONFIG_MIPS_PB1200) +#define WM8731 +#define WM_MODE_USB +#include +#endif + +#if defined(CONFIG_MIPS_FICMMP) +#define WM8721 +#define WM_MODE_NORMAL +#include +#endif + + +#define WM_VOLUME_MIN 47 +#define WM_VOLUME_SCALE 80 + +#if defined(WM8731) + /* OSS interface to the wm i2s.. */ + #define CODEC_NAME "Wolfson WM8731 I2S" + #define WM_I2S_STEREO_MASK (SOUND_MASK_PCM | SOUND_MASK_LINE) + #define WM_I2S_SUPPORTED_MASK (WM_I2S_STEREO_MASK | SOUND_MASK_MIC) + #define WM_I2S_RECORD_MASK (SOUND_MASK_MIC | SOUND_MASK_LINE1 | SOUND_MASK_LINE) +#elif defined(WM8721) + #define CODEC_NAME "Wolfson WM8721 I2S" + #define WM_I2S_STEREO_MASK (SOUND_MASK_PCM) + #define WM_I2S_SUPPORTED_MASK (WM_I2S_STEREO_MASK) + #define WM_I2S_RECORD_MASK (0) +#endif + + +#define supported_mixer(FOO) ((FOO >= 0) && \ + (FOO < SOUND_MIXER_NRDEVICES) && \ + WM_I2S_SUPPORTED_MASK & (1< #include @@ -98,13 +137,51 @@ * 0 = no VRA, 1 = use VRA if codec supports it * The framework is here, but we currently force no VRA. */ +#if defined(CONFIG_MIPS_PB1200) | defined(CONFIG_MIPS_PB1550) static int vra = 0; +#elif defined(CONFIG_MIPS_FICMMP) +static int vra = 1; +#endif + +#define WM_REG_L_HEADPHONE_OUT 0x02 +#define WM_REG_R_HEADPHONE_OUT 0x03 +#define WM_REG_ANALOGUE_AUDIO_PATH_CTRL 0x04 +#define WM_REG_DIGITAL_AUDIO_PATH_CTRL 0x05 +#define WM_REG_POWER_DOWN_CTRL 0x06 +#define WM_REG_DIGITAL_AUDIO_IF 0x07 +#define WM_REG_SAMPLING_CONTROL 0x08 +#define WM_REG_ACTIVE_CTRL 0x09 +#define WM_REG_RESET 0x0F +#define WM_SC_SR_96000 (0x7<<2) +#define WM_SC_SR_88200 (0xF<<2) +#define WM_SC_SR_48000 (0x0<<2) +#define WM_SC_SR_44100 (0x8<<2) +#define WM_SC_SR_32000 (0x6<<2) +#define WM_SC_SR_8018 (0x9<<2) +#define WM_SC_SR_8000 (0x1<<2) +#define WM_SC_MODE_USB 1 +#define WM_SC_MODE_NORMAL 0 +#define WM_SC_BOSR_250FS (0<<1) +#define WM_SC_BOSR_272FS (1<<1) +#define WM_SC_BOSR_256FS (0<<1) +#define WM_SC_BOSR_128FS (0<<1) +#define WM_SC_BOSR_384FS (1<<1) +#define WM_SC_BOSR_192FS (1<<1) + +#define WS_64FS 31 +#define WS_96FS 47 +#define WS_128FS 63 +#define WS_192FS 95 + +#define MIN_Q_COUNT 2 + MODULE_PARM(vra, "i"); MODULE_PARM_DESC(vra, "if 1 use VRA if codec supports it"); static struct au1550_state { /* soundcore stuff */ int dev_audio; + int dev_mixer; spinlock_t lock; struct semaphore open_sem; @@ -114,6 +191,11 @@ int no_vra; volatile psc_i2s_t *psc_addr; + int level_line; + int level_mic; + int level_left; + int level_right; + struct dmabuf { u32 dmanr; unsigned sample_rate; @@ -195,60 +277,224 @@ } } -/* Just a place holder. The Wolfson codec is a write only device, - * so we would have to keep a local copy of the data. - */ -#if 0 -static u8 -rdcodec(u8 addr) -{ - return 0 /* data */; -} -#endif - - static void -wrcodec(u8 ctlreg, u8 val) +wrcodec(u8 ctlreg, u16 val) { int rcnt; extern int pb1550_wm_codec_write(u8 addr, u8 reg, u8 val); - /* The codec is a write only device, with a 16-bit control/data * word. Although it is written as two bytes on the I2C, the * format is actually 7 bits of register and 9 bits of data. * The ls bit of the first byte is the ms bit of the data. */ rcnt = 0; - while ((pb1550_wm_codec_write((0x36 >> 1), ctlreg, val) != 1) - && (rcnt < 50)) { + while ((pb1550_wm_codec_write((0x36 >> 1), + (ctlreg << 1) | ((val >> 8) & 0x01), + (u8) (val & 0x00FF)) != 1) && + (rcnt < 50)) { rcnt++; -#if 0 - printk("Codec write retry %02x %02x\n", ctlreg, val); -#endif } + + au1550_delay(10); +} + +static int +au1550_open_mixdev(struct inode *inode, struct file *file) +{ + file->private_data = &au1550_state; + return 0; +} + +static int +au1550_release_mixdev(struct inode *inode, struct file *file) +{ + return 0; +} + +static int wm_i2s_read_mixer(struct au1550_state *s, int oss_channel) +{ + int ret = 0; + + if (WM_I2S_STEREO_MASK & (1 << oss_channel)) { + /* nice stereo mixers .. */ + + ret = s->level_left | (s->level_right << 8); + } else if (oss_channel == SOUND_MIXER_MIC) { + ret = 0; + /* TODO: Implement read mixer for input/output codecs */ + } + + return ret; } +static void wm_i2s_write_mixer(struct au1550_state *s, int oss_channel, unsigned int left, unsigned int right) +{ + if (WM_I2S_STEREO_MASK & (1 << oss_channel)) { + /* stereo mixers */ + s->level_left = left; + s->level_right = right; + + right = (right * WM_VOLUME_SCALE) / 100; + left = (left * WM_VOLUME_SCALE) / 100; + if (right > WM_VOLUME_SCALE) + right = WM_VOLUME_SCALE; + if (left > WM_VOLUME_SCALE) + left = WM_VOLUME_SCALE; + + right += WM_VOLUME_MIN; + left += WM_VOLUME_MIN; + + wrcodec(WM_REG_L_HEADPHONE_OUT, left); + wrcodec(WM_REG_R_HEADPHONE_OUT, right); + + }else if (oss_channel == SOUND_MIXER_MIC) { + /* TODO: implement write mixer for input/output codecs */ + } +} + +/* a thin wrapper for write_mixer */ +static void wm_i2s_set_mixer(struct au1550_state *s, unsigned int oss_mixer, unsigned int val ) +{ + unsigned int left,right; + + /* cleanse input a little */ + right = ((val >> 8) & 0xff) ; + left = (val & 0xff) ; + + if (right > 100) right = 100; + if (left > 100) left = 100; + + wm_i2s_write_mixer(s, oss_mixer, left, right); +} + +static int +au1550_ioctl_mixdev(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +{ + struct au1550_state *s = (struct au1550_state *)file->private_data; + + int i, val = 0; + + if (cmd == SOUND_MIXER_INFO) { + mixer_info info; + strncpy(info.id, CODEC_NAME, sizeof(info.id)); + strncpy(info.name, CODEC_NAME, sizeof(info.name)); + info.modify_counter = 0; + if (copy_to_user((void *)arg, &info, sizeof(info))) + return -EFAULT; + return 0; + } + if (cmd == SOUND_OLD_MIXER_INFO) { + _old_mixer_info info; + strncpy(info.id, CODEC_NAME, sizeof(info.id)); + strncpy(info.name, CODEC_NAME, sizeof(info.name)); + if (copy_to_user((void *)arg, &info, sizeof(info))) + return -EFAULT; + return 0; + } + + if (_IOC_TYPE(cmd) != 'M' || _SIOC_SIZE(cmd) != sizeof(int)) + return -EINVAL; + + if (cmd == OSS_GETVERSION) + return put_user(SOUND_VERSION, (int *)arg); + + if (_SIOC_DIR(cmd) == _SIOC_READ) { + switch (_IOC_NR(cmd)) { + case SOUND_MIXER_RECSRC: /* give them the current record src */ + val = 0; + /* + if (!codec->recmask_io) { + val = 0; + } else { + val = codec->recmask_io(codec, 1, 0); + }*/ + break; + + case SOUND_MIXER_DEVMASK: /* give them the supported mixers */ + val = WM_I2S_SUPPORTED_MASK; + break; + + case SOUND_MIXER_RECMASK: + /* Arg contains a bit for each supported recording + * source */ + val = WM_I2S_RECORD_MASK; + break; + + case SOUND_MIXER_STEREODEVS: + /* Mixer channels supporting stereo */ + val = WM_I2S_STEREO_MASK; + break; + + case SOUND_MIXER_CAPS: + val = SOUND_CAP_EXCL_INPUT; + break; + + default: /* read a specific mixer */ + i = _IOC_NR(cmd); + + if (!supported_mixer(i)) + return -EINVAL; + + val = wm_i2s_read_mixer(s, i); + break; + } + return put_user(val, (int *)arg); + } + + if (_SIOC_DIR(cmd) == (_SIOC_WRITE|_SIOC_READ)) { + if (get_user(val, (int *)arg)) + return -EFAULT; + + switch (_IOC_NR(cmd)) { + case SOUND_MIXER_RECSRC: + /* Arg contains a bit for each recording source */ + if (!WM_I2S_RECORD_MASK) + return -EINVAL; + if (!val) + return 0; + if (!(val &= WM_I2S_RECORD_MASK)) + return -EINVAL; + + return 0; + default: /* write a specific mixer */ + i = _IOC_NR(cmd); + + if (!supported_mixer(i)) + return -EINVAL; + + wm_i2s_set_mixer(s, i, val); + + return 0; + } +} + return -EINVAL; +} + +static loff_t +au1550_llseek(struct file *file, loff_t offset, int origin) +{ + return -ESPIPE; +} + +static /*const */ struct file_operations au1550_mixer_fops = { + owner:THIS_MODULE, + llseek:au1550_llseek, + ioctl:au1550_ioctl_mixdev, + open:au1550_open_mixdev, + release:au1550_release_mixdev, +}; + void -codec_init(void) +codec_init(struct au1550_state *s) { - wrcodec(0x1e, 0x00); /* Reset */ - au1550_delay(200); - wrcodec(0x0c, 0x00); /* Power up everything */ - au1550_delay(10); - wrcodec(0x12, 0x00); /* Deactivate codec */ - au1550_delay(10); - wrcodec(0x08, 0x10); /* Select DAC outputs to line out */ - au1550_delay(10); - wrcodec(0x0a, 0x00); /* Disable output mute */ - au1550_delay(10); - wrcodec(0x05, 0x70); /* lower output volume on headphone */ - au1550_delay(10); - wrcodec(0x0e, 0x02); /* Set slave, 16-bit, I2S modes */ - au1550_delay(10); - wrcodec(0x10, 0x01); /* 12MHz (USB), 250fs */ - au1550_delay(10); - wrcodec(0x12, 0x01); /* Activate codec */ - au1550_delay(10); + wrcodec(WM_REG_RESET, 0x00); /* Reset */ + wrcodec(WM_REG_POWER_DOWN_CTRL, 0x00); /* Power up everything */ + wrcodec(WM_REG_ACTIVE_CTRL, 0x00); /* Deactivate codec */ + wrcodec(WM_REG_ANALOGUE_AUDIO_PATH_CTRL, 0x10); /* Select DAC outputs to line out */ + wrcodec(WM_REG_DIGITAL_AUDIO_PATH_CTRL, 0x00); /* Disable output mute */ + wm_i2s_write_mixer(s, SOUND_MIXER_PCM, 74, 74); + wrcodec(WM_REG_DIGITAL_AUDIO_IF, 0x02); /* Set slave, 16-bit, I2S modes */ + wrcodec(WM_REG_ACTIVE_CTRL, 0x01); /* Activate codec */ } /* stop the ADC before calling */ @@ -256,27 +502,16 @@ set_adc_rate(struct au1550_state *s, unsigned rate) { struct dmabuf *adc = &s->dma_adc; - struct dmabuf *dac = &s->dma_dac; - if (s->no_vra) { - /* calc SRC factor - */ + #if defined(WM_MODE_USB) adc->src_factor = (((SAMP_RATE*2) / rate) + 1) >> 1; adc->sample_rate = SAMP_RATE / adc->src_factor; return; - } + #else + //TODO: Need code for normal mode + #endif adc->src_factor = 1; - - -#if 0 - rate = rate > SAMP_RATE ? SAMP_RATE : rate; - - wrcodec(0, 0); /* I don't yet know what to write here if we vra */ - - adc->sample_rate = rate; - dac->sample_rate = rate; -#endif } /* stop the DAC before calling */ @@ -284,26 +519,89 @@ set_dac_rate(struct au1550_state *s, unsigned rate) { struct dmabuf *dac = &s->dma_dac; - struct dmabuf *adc = &s->dma_adc; - if (s->no_vra) { - /* calc SRC factor - */ - dac->src_factor = (((SAMP_RATE*2) / rate) + 1) >> 1; - dac->sample_rate = SAMP_RATE / dac->src_factor; - return; + u16 sr, ws, div, bosr, mode; + volatile psc_i2s_t* ip = (volatile psc_i2s_t *)I2S_PSC_BASE; + u32 cfg; + + #if defined(CONFIG_MIPS_FICMMP) + rate = ficmmp_set_i2s_sample_rate(rate); + #endif + + switch(rate) + { + case 96000: + sr = WM_SC_SR_96000; + ws = WS_64FS; + div = PSC_I2SCFG_DIV2; + break; + case 88200: + sr = WM_SC_SR_88200; + ws = WS_64FS; + div = PSC_I2SCFG_DIV2; + break; + case 44100: + sr = WM_SC_SR_44100; + ws = WS_128FS; + div = PSC_I2SCFG_DIV2; + break; + case 48000: + sr = WM_SC_SR_48000; + ws = WS_128FS; + div = PSC_I2SCFG_DIV2; + break; + case 32000: + sr = WM_SC_SR_32000; + ws = WS_96FS; + div = PSC_I2SCFG_DIV4; + break; + case 8018: + sr = WM_SC_SR_8018; + ws = WS_128FS; + div = PSC_I2SCFG_DIV2; + break; + case 8000: + default: + sr = WM_SC_SR_8000; + ws = WS_96FS; + div = PSC_I2SCFG_DIV16; + break; } + #if defined(WM_MODE_USB) + mode = WM_SC_MODE_USB; + #else + mode = WM_SC_MODE_NORMAL; + #endif + + bosr = 0; + dac->src_factor = 1; + dac->sample_rate = rate; -#if 0 - rate = rate > SAMP_RATE ? SAMP_RATE : rate; + /* Deactivate codec */ + wrcodec(WM_REG_ACTIVE_CTRL, 0x00); - wrcodec(0, 0); /* I don't yet know what to write here if we vra */ + /* Disable I2S controller */ + ip->psc_i2scfg &= ~PSC_I2SCFG_DE_ENABLE; + /* Wait for device disabled */ + while ((ip->psc_i2sstat & PSC_I2SSTAT_DR) == 1); + + cfg = ip->psc_i2scfg; + /* Clear WS and DIVIDER values */ + cfg &= ~(PSC_I2SCFG_WS_MASK | PSC_I2SCFG_DIV_MASK); + cfg |= PSC_I2SCFG_WS(ws) | div; + /* Reconfigure and enable */ + ip->psc_i2scfg = cfg | PSC_I2SCFG_DE_ENABLE; - adc->sample_rate = rate; - dac->sample_rate = rate; -#endif + /* Wait for device enabled */ + while ((ip->psc_i2sstat & PSC_I2SSTAT_DR) == 0); + + /* Set appropriate sampling rate */ + wrcodec(WM_REG_SAMPLING_CONTROL, bosr | mode | sr); + + /* Activate codec */ + wrcodec(WM_REG_ACTIVE_CTRL, 0x01); } static void @@ -354,8 +652,7 @@ ip->psc_i2spcr = PSC_I2SPCR_RP; au_sync(); - /* Wait for Receive Busy to show disabled. - */ + /* Wait for Receive Busy to show disabled. */ do { stat = ip->psc_i2sstat; au_sync(); @@ -463,7 +760,6 @@ if (db->num_channels == 1) db->cnt_factor *= 2; db->cnt_factor *= db->src_factor; - db->count = 0; db->dma_qcount = 0; db->nextIn = db->nextOut = db->rawbuf; @@ -546,12 +842,13 @@ if (i2s_stat & (PSC_I2SSTAT_TF | PSC_I2SSTAT_TR | PSC_I2SSTAT_TF)) dbg("I2S status = 0x%08x", i2s_stat); #endif + db->dma_qcount--; if (db->count >= db->fragsize) { - if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut, - db->fragsize) == 0) { - err("qcount < 2 and no ring room!"); + if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut, db->fragsize) == 0) + { + err("qcount < MIN_Q_COUNT and no ring room!"); } db->nextOut += db->fragsize; if (db->nextOut >= db->rawbuf + db->dmasize) @@ -606,65 +903,43 @@ } -static loff_t -au1550_llseek(struct file *file, loff_t offset, int origin) -{ - return -ESPIPE; -} - - -#if 0 -static int -au1550_open_mixdev(struct inode *inode, struct file *file) -{ - file->private_data = &au1550_state; - return 0; -} - -static int -au1550_release_mixdev(struct inode *inode, struct file *file) -{ - return 0; -} - -static int -mixdev_ioctl(struct ac97_codec *codec, unsigned int cmd, - unsigned long arg) -{ - return codec->mixer_ioctl(codec, cmd, arg); -} - -static int -au1550_ioctl_mixdev(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct au1550_state *s = (struct au1550_state *)file->private_data; - struct ac97_codec *codec = s->codec; - - return mixdev_ioctl(codec, cmd, arg); -} - -static /*const */ struct file_operations au1550_mixer_fops = { - owner:THIS_MODULE, - llseek:au1550_llseek, - ioctl:au1550_ioctl_mixdev, - open:au1550_open_mixdev, - release:au1550_release_mixdev, -}; -#endif - static int drain_dac(struct au1550_state *s, int nonblock) { unsigned long flags; int count, tmo; + struct dmabuf *db = &s->dma_dac; + + //DPRINTF(); if (s->dma_dac.mapped || !s->dma_dac.ready || s->dma_dac.stopped) return 0; for (;;) { spin_lock_irqsave(&s->lock, flags); - count = s->dma_dac.count; + count = db->count; + + /* Pad the ddma buffer with zeros if the amount remaining + * is not a multiple of fragsize */ + if(count % db->fragsize != 0) + { + int pad = db->fragsize - (count % db->fragsize); + char* bufptr = db->nextIn; + char* bufend = db->rawbuf + db->dmasize; + + if((bufend - bufptr) < pad) + printk("Error! ddma padding is bigger than available ring space!\n"); + else + { + memset((void*)bufptr, 0, pad); + count += pad; + db->nextIn += pad; + db->count += pad; + if (db->dma_qcount == 0) + start_dac(s); + db->dma_qcount++; + } + } spin_unlock_irqrestore(&s->lock, flags); if (count <= 0) break; @@ -672,9 +947,9 @@ break; if (nonblock) return -EBUSY; - tmo = 1000 * count / (s->no_vra ? - SAMP_RATE : s->dma_dac.sample_rate); + tmo = 1000 * count / s->dma_dac.sample_rate; tmo /= s->dma_dac.dma_bytes_per_sample; + au1550_delay(tmo); } if (signal_pending(current)) @@ -698,8 +973,7 @@ * If interpolating (no VRA), duplicate every audio frame src_factor times. */ static int -translate_from_user(struct dmabuf *db, char* dmabuf, char* userbuf, - int dmacount) +translate_from_user(struct dmabuf *db, char* dmabuf, char* userbuf, int dmacount) { int sample, i; int interp_bytes_per_sample; @@ -737,11 +1011,12 @@ /* duplicate every audio frame src_factor times */ - for (i = 0; i < db->src_factor; i++) + for (i = 0; i < db->src_factor; i++) { memcpy(dmabuf, dmasample, db->dma_bytes_per_sample); + dmabuf += interp_bytes_per_sample; + } userbuf += db->user_bytes_per_sample; - dmabuf += interp_bytes_per_sample; } return num_samples * interp_bytes_per_sample; @@ -996,15 +1271,14 @@ * on the dma queue. If the queue count reaches zero, * we know the dma has stopped. */ - while ((db->dma_qcount < 2) && (db->count >= db->fragsize)) { + while ((db->dma_qcount < MIN_Q_COUNT) && (db->count >= db->fragsize)) { if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut, db->fragsize) == 0) { - err("qcount < 2 and no ring room!"); + err("qcount < MIN_Q_COUNT and no ring room!"); } db->nextOut += db->fragsize; if (db->nextOut >= db->rawbuf + db->dmasize) db->nextOut -= db->dmasize; - db->count -= db->fragsize; db->total_bytes += db->dma_fragsize; if (db->dma_qcount == 0) start_dac(s); @@ -1017,7 +1291,6 @@ buffer += usercnt; ret += usercnt; } /* while (count > 0) */ - out: up(&s->sem); out2: @@ -1371,9 +1644,6 @@ s->dma_dac.cnt_factor; abinfo.fragstotal = s->dma_dac.numfrag; abinfo.fragments = abinfo.bytes >> s->dma_dac.fragshift; -#ifdef AU1000_VERBOSE_DEBUG - dbg("bytes=%d, fragments=%d", abinfo.bytes, abinfo.fragments); -#endif return copy_to_user((void *) arg, &abinfo, sizeof(abinfo)) ? -EFAULT : 0; @@ -1536,13 +1806,9 @@ case SNDCTL_DSP_SETSYNCRO: case SOUND_PCM_READ_FILTER: return -EINVAL; + default: break; } - -#if 0 - return mixdev_ioctl(s->codec, cmd, arg); -#else return 0; -#endif } @@ -1664,15 +1930,15 @@ MODULE_AUTHOR("Advanced Micro Devices (AMD), dan@embeddededge.com"); MODULE_DESCRIPTION("Au1550 Audio Driver"); +#if defined(WM_MODE_USB) /* Set up an internal clock for the PSC3. This will then get * driven out of the Au1550 as the master. */ static void intclk_setup(void) { - uint clk, rate, stat; - - /* Wire up Freq4 as a clock for the PSC3. + uint clk, rate; + /* Wire up Freq4 as a clock for the PSC. * We know SMBus uses Freq3. * By making changes to this rate, plus the word strobe * size, we can make fine adjustments to the actual data rate. @@ -1700,11 +1966,17 @@ */ clk = au_readl(SYS_CLKSRC); au_sync(); +#if defined(CONFIG_SOC_AU1550) clk &= ~0x01f00000; clk |= (6 << 22); +#elif defined(CONFIG_SOC_AU1200) + clk &= ~0x3e000000; + clk |= (6 << 27); +#endif au_writel(clk, SYS_CLKSRC); au_sync(); } +#endif static int __devinit au1550_probe(void) @@ -1724,6 +1996,11 @@ init_MUTEX(&s->open_sem); spin_lock_init(&s->lock); + /* CPLD Mux for I2s */ + +#if defined(CONFIG_MIPS_PB1200) + bcsr->resets |= BCSR_RESETS_PCS1MUX; +#endif s->psc_addr = (volatile psc_i2s_t *)I2S_PSC_BASE; ip = s->psc_addr; @@ -1765,9 +2042,8 @@ if ((s->dev_audio = register_sound_dsp(&au1550_audio_fops, -1)) < 0) goto err_dev1; -#if 0 - if ((s->codec->dev_mixer = - register_sound_mixer(&au1550_mixer_fops, -1)) < 0) +#if 1 + if ((s->dev_mixer = register_sound_mixer(&au1550_mixer_fops, -1)) < 0) goto err_dev2; #endif @@ -1777,7 +2053,6 @@ proc_au1550_dump, NULL); #endif /* AU1550_DEBUG */ - intclk_setup(); /* The GPIO for the appropriate PSC was configured by the * board specific start up. @@ -1786,7 +2061,12 @@ */ ip->psc_ctrl = PSC_CTRL_DISABLE; /* Disable PSC */ au_sync(); +#if defined(WM_MODE_USB) + intclk_setup(); ip->psc_sel = (PSC_SEL_CLK_INTCLK | PSC_SEL_PS_I2SMODE); +#else + ip->psc_sel = (PSC_SEL_CLK_EXTCLK | PSC_SEL_PS_I2SMODE); +#endif au_sync(); /* Enable PSC @@ -1806,42 +2086,18 @@ * Actual I2S mode (first bit delayed by one clock). * Master mode (We provide the clock from the PSC). */ - val = PSC_I2SCFG_SET_LEN(16); -#ifdef TRY_441KHz - /* This really should be 250, but it appears that all of the - * PLLs, dividers and so on in the chain shift it. That's the - * problem with sourceing the clock instead of letting the very - * stable codec provide it. But, the PSC doesn't appear to want - * to work in slave mode, so this is what we get. It's not - * studio quality timing, but it's good enough for listening - * to mp3s. - */ - val |= PSC_I2SCFG_SET_WS(252); -#else - val |= PSC_I2SCFG_SET_WS(250); -#endif - val |= PSC_I2SCFG_RT_FIFO8 | PSC_I2SCFG_TT_FIFO8 | \ + + val = PSC_I2SCFG_SET_LEN(16) | PSC_I2SCFG_WS(WS_128FS) | PSC_I2SCFG_RT_FIFO8 | PSC_I2SCFG_TT_FIFO8 | \ PSC_I2SCFG_BI | PSC_I2SCFG_XM; - ip->psc_i2scfg = val; - au_sync(); - val |= PSC_I2SCFG_DE_ENABLE; - ip->psc_i2scfg = val; - au_sync(); + ip->psc_i2scfg = val | PSC_I2SCFG_DE_ENABLE; - /* Wait for Device ready. - */ - do { - val = ip->psc_i2sstat; - au_sync(); - } while ((val & PSC_I2SSTAT_DR) == 0); + set_dac_rate(s, 8000); //Set default rate - val = ip->psc_i2scfg; - au_sync(); + codec_init(s); - codec_init(); + s->no_vra = vra ? 0 : 1; - s->no_vra = 1; if (s->no_vra) info("no VRA, interpolating and decimating"); @@ -1866,6 +2122,8 @@ err_dev2: unregister_sound_dsp(s->dev_audio); #endif + err_dev2: + unregister_sound_dsp(s->dev_audio); err_dev1: au1xxx_dbdma_chan_free(s->dma_adc.dmanr); err_dma2: diff -Nur linux-2.4.32-rc1/drivers/sound/au1550_psc.c linux-2.4.32-rc1.mips/drivers/sound/au1550_psc.c --- linux-2.4.32-rc1/drivers/sound/au1550_psc.c 2005-01-19 15:10:04.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/sound/au1550_psc.c 2005-01-30 09:01:28.000000000 +0100 @@ -30,6 +30,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. * */ + #include #include #include @@ -63,6 +64,14 @@ #include #endif +#ifdef CONFIG_MIPS_PB1200 +#include +#endif + +#ifdef CONFIG_MIPS_DB1200 +#include +#endif + #undef OSS_DOCUMENTED_MIXER_SEMANTICS #define AU1550_MODULE_NAME "Au1550 psc audio" @@ -521,7 +530,14 @@ spin_unlock_irqrestore(&s->lock, flags); } - +/* + NOTE: The xmit slots cannot be changed on the fly when in full-duplex + because the AC'97 block must be stopped/started. When using this driver + in full-duplex (in & out at the same time), the DMA engine will stop if + you disable the block. + TODO: change implementation to properly restart adc/dac after setting + xmit slots. +*/ static void set_xmit_slots(int num_channels) { @@ -565,6 +581,14 @@ } while ((stat & PSC_AC97STAT_DR) == 0); } +/* + NOTE: The recv slots cannot be changed on the fly when in full-duplex + because the AC'97 block must be stopped/started. When using this driver + in full-duplex (in & out at the same time), the DMA engine will stop if + you disable the block. + TODO: change implementation to properly restart adc/dac after setting + recv slots. +*/ static void set_recv_slots(int num_channels) { @@ -608,7 +632,6 @@ spin_lock_irqsave(&s->lock, flags); - set_xmit_slots(db->num_channels); au_writel(PSC_AC97PCR_TC, PSC_AC97PCR); au_sync(); au_writel(PSC_AC97PCR_TS, PSC_AC97PCR); @@ -640,7 +663,6 @@ db->nextIn -= db->dmasize; } - set_recv_slots(db->num_channels); au1xxx_dbdma_start(db->dmanr); au_writel(PSC_AC97PCR_RC, PSC_AC97PCR); au_sync(); @@ -752,12 +774,16 @@ if (ac97c_stat & (AC97C_XU | AC97C_XO | AC97C_TE)) dbg("AC97C status = 0x%08x", ac97c_stat); #endif + /* There is a possiblity that we are getting 1 interrupt for + multiple descriptors. Use ddma api to find out how many + completed. + */ db->dma_qcount--; if (db->count >= db->fragsize) { if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut, db->fragsize) == 0) { - err("qcount < 2 and no ring room!"); + err("qcount < 2 and no ring room1!"); } db->nextOut += db->fragsize; if (db->nextOut >= db->rawbuf + db->dmasize) @@ -941,11 +967,12 @@ /* duplicate every audio frame src_factor times */ - for (i = 0; i < db->src_factor; i++) + for (i = 0; i < db->src_factor; i++) { memcpy(dmabuf, dmasample, db->dma_bytes_per_sample); + dmabuf += interp_bytes_per_sample; + } userbuf += db->user_bytes_per_sample; - dmabuf += interp_bytes_per_sample; } return num_samples * interp_bytes_per_sample; @@ -1203,7 +1230,7 @@ while ((db->dma_qcount < 2) && (db->count >= db->fragsize)) { if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut, db->fragsize) == 0) { - err("qcount < 2 and no ring room!"); + err("qcount < 2 and no ring room!0"); } db->nextOut += db->fragsize; if (db->nextOut >= db->rawbuf + db->dmasize) @@ -1481,6 +1508,7 @@ return -EINVAL; stop_adc(s); s->dma_adc.num_channels = val; + set_recv_slots(val); if ((ret = prog_dmabuf_adc(s))) return ret; } @@ -1538,6 +1566,7 @@ } s->dma_dac.num_channels = val; + set_xmit_slots(val); if ((ret = prog_dmabuf_dac(s))) return ret; } @@ -1832,10 +1861,8 @@ down(&s->open_sem); } - stop_dac(s); - stop_adc(s); - if (file->f_mode & FMODE_READ) { + stop_adc(s); s->dma_adc.ossfragshift = s->dma_adc.ossmaxfrags = s->dma_adc.subdivision = s->dma_adc.total_bytes = 0; s->dma_adc.num_channels = 1; @@ -1846,6 +1873,7 @@ } if (file->f_mode & FMODE_WRITE) { + stop_dac(s); s->dma_dac.ossfragshift = s->dma_dac.ossmaxfrags = s->dma_dac.subdivision = s->dma_dac.total_bytes = 0; s->dma_dac.num_channels = 1; @@ -2091,6 +2119,9 @@ ac97_read_proc, &s->codec); #endif + set_xmit_slots(1); + set_recv_slots(1); + return 0; err_dev3: diff -Nur linux-2.4.32-rc1/drivers/sound/Config.in linux-2.4.32-rc1.mips/drivers/sound/Config.in --- linux-2.4.32-rc1/drivers/sound/Config.in 2005-01-19 15:10:04.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/sound/Config.in 2005-04-21 07:53:07.000000000 +0200 @@ -72,10 +72,15 @@ if [ "$CONFIG_DDB5477" = "y" ]; then dep_tristate ' NEC Vrc5477 AC97 sound' CONFIG_SOUND_VRC5477 $CONFIG_SOUND fi -if [ "$CONFIG_SOC_AU1X00" = "y" -o "$CONFIG_SOC_AU1500" = "y" ]; then - dep_tristate ' Au1x00 Sound' CONFIG_SOUND_AU1X00 $CONFIG_SOUND - dep_tristate ' Au1550 PSC Sound' CONFIG_SOUND_AU1550_PSC $CONFIG_SOUND - dep_tristate ' Au1550 I2S Sound' CONFIG_SOUND_AU1550_I2S $CONFIG_SOUND +if [ "$CONFIG_SOC_AU1000" = "y" -o \ + "$CONFIG_SOC_AU1500" = "y" -o \ + "$CONFIG_SOC_AU1100" = "y" ]; then + dep_tristate ' Au1x00 AC97 Sound' CONFIG_SOUND_AU1X00 $CONFIG_SOUND +fi +if [ "$CONFIG_SOC_AU1550" = "y" -o \ + "$CONFIG_SOC_AU1200" = "y" ]; then + dep_tristate ' Au1550/Au1200 PSC AC97 Sound' CONFIG_SOUND_AU1550_PSC $CONFIG_SOUND + dep_tristate ' Au1550/Au1200 PSC I2S Sound' CONFIG_SOUND_AU1550_I2S $CONFIG_SOUND fi dep_tristate ' Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core' CONFIG_SOUND_TRIDENT $CONFIG_SOUND $CONFIG_PCI diff -Nur linux-2.4.32-rc1/drivers/tc/lk201.c linux-2.4.32-rc1.mips/drivers/tc/lk201.c --- linux-2.4.32-rc1/drivers/tc/lk201.c 2004-02-18 14:36:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/tc/lk201.c 2004-09-28 02:53:04.000000000 +0200 @@ -5,7 +5,7 @@ * for more details. * * Copyright (C) 1999-2002 Harald Koerfgen - * Copyright (C) 2001, 2002, 2003 Maciej W. Rozycki + * Copyright (C) 2001, 2002, 2003, 2004 Maciej W. Rozycki */ #include @@ -23,8 +23,8 @@ #include #include #include +#include -#include "zs.h" #include "lk201.h" /* @@ -55,19 +55,20 @@ unsigned char kbd_sysrq_key = -1; #endif -#define KEYB_LINE 3 +#define KEYB_LINE_ZS 3 +#define KEYB_LINE_DZ 0 -static int __init lk201_init(struct dec_serial *); -static void __init lk201_info(struct dec_serial *); -static void lk201_kbd_rx_char(unsigned char, unsigned char); +static int __init lk201_init(void *); +static void __init lk201_info(void *); +static void lk201_rx_char(unsigned char, unsigned char); -struct zs_hook lk201_kbdhook = { +static struct dec_serial_hook lk201_hook = { .init_channel = lk201_init, .init_info = lk201_info, .rx_char = NULL, .poll_rx_char = NULL, .poll_tx_char = NULL, - .cflags = B4800 | CS8 | CSTOPB | CLOCAL + .cflags = B4800 | CS8 | CSTOPB | CLOCAL, }; /* @@ -93,28 +94,28 @@ LK_CMD_ENB_BELL, LK_PARAM_VOLUME(4), }; -static struct dec_serial* lk201kbd_info; +static void *lk201_handle; -static int lk201_send(struct dec_serial *info, unsigned char ch) +static int lk201_send(unsigned char ch) { - if (info->hook->poll_tx_char(info, ch)) { + if (lk201_hook.poll_tx_char(lk201_handle, ch)) { printk(KERN_ERR "lk201: transmit timeout\n"); return -EIO; } return 0; } -static inline int lk201_get_id(struct dec_serial *info) +static inline int lk201_get_id(void) { - return lk201_send(info, LK_CMD_REQ_ID); + return lk201_send(LK_CMD_REQ_ID); } -static int lk201_reset(struct dec_serial *info) +static int lk201_reset(void) { int i, r; for (i = 0; i < sizeof(lk201_reset_string); i++) { - r = lk201_send(info, lk201_reset_string[i]); + r = lk201_send(lk201_reset_string[i]); if (r < 0) return r; } @@ -203,24 +204,26 @@ static int write_kbd_rate(struct kbd_repeat *rep) { - struct dec_serial* info = lk201kbd_info; int delay, rate; int i; delay = rep->delay / 5; rate = rep->rate; for (i = 0; i < 4; i++) { - if (info->hook->poll_tx_char(info, LK_CMD_RPT_RATE(i))) + if (lk201_hook.poll_tx_char(lk201_handle, + LK_CMD_RPT_RATE(i))) return 1; - if (info->hook->poll_tx_char(info, LK_PARAM_DELAY(delay))) + if (lk201_hook.poll_tx_char(lk201_handle, + LK_PARAM_DELAY(delay))) return 1; - if (info->hook->poll_tx_char(info, LK_PARAM_RATE(rate))) + if (lk201_hook.poll_tx_char(lk201_handle, + LK_PARAM_RATE(rate))) return 1; } return 0; } -static int lk201kbd_rate(struct kbd_repeat *rep) +static int lk201_kbd_rate(struct kbd_repeat *rep) { if (rep == NULL) return -EINVAL; @@ -237,10 +240,8 @@ return 0; } -static void lk201kd_mksound(unsigned int hz, unsigned int ticks) +static void lk201_kd_mksound(unsigned int hz, unsigned int ticks) { - struct dec_serial* info = lk201kbd_info; - if (!ticks) return; @@ -253,20 +254,19 @@ ticks = 7; ticks = 7 - ticks; - if (info->hook->poll_tx_char(info, LK_CMD_ENB_BELL)) + if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_ENB_BELL)) return; - if (info->hook->poll_tx_char(info, LK_PARAM_VOLUME(ticks))) + if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_VOLUME(ticks))) return; - if (info->hook->poll_tx_char(info, LK_CMD_BELL)) + if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_BELL)) return; } void kbd_leds(unsigned char leds) { - struct dec_serial* info = lk201kbd_info; unsigned char l = 0; - if (!info) /* FIXME */ + if (!lk201_handle) /* FIXME */ return; /* FIXME -- Only Hold and Lock LEDs for now. --macro */ @@ -275,13 +275,13 @@ if (leds & LED_CAP) l |= LK_LED_LOCK; - if (info->hook->poll_tx_char(info, LK_CMD_LEDS_ON)) + if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_ON)) return; - if (info->hook->poll_tx_char(info, LK_PARAM_LED_MASK(l))) + if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(l))) return; - if (info->hook->poll_tx_char(info, LK_CMD_LEDS_OFF)) + if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_OFF)) return; - if (info->hook->poll_tx_char(info, LK_PARAM_LED_MASK(~l))) + if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(~l))) return; } @@ -307,7 +307,7 @@ return 0x80; } -static void lk201_kbd_rx_char(unsigned char ch, unsigned char stat) +static void lk201_rx_char(unsigned char ch, unsigned char fl) { static unsigned char id[6]; static int id_i; @@ -316,9 +316,8 @@ static int prev_scancode; unsigned char c = scancodeRemap[ch]; - if (stat && stat != TTY_OVERRUN) { - printk(KERN_ERR "lk201: keyboard receive error: 0x%02x\n", - stat); + if (fl != TTY_NORMAL && fl != TTY_OVERRUN) { + printk(KERN_ERR "lk201: keyboard receive error: 0x%02x\n", fl); return; } @@ -335,7 +334,7 @@ /* OK, the power-up concluded. */ lk201_report(id); if (id[2] == LK_STAT_PWRUP_OK) - lk201_get_id(lk201kbd_info); + lk201_get_id(); else { id_i = 0; printk(KERN_ERR "lk201: keyboard power-up " @@ -345,7 +344,7 @@ /* We got the ID; report it and start operation. */ id_i = 0; lk201_id(id); - lk201_reset(lk201kbd_info); + lk201_reset(); } return; } @@ -398,29 +397,28 @@ tasklet_schedule(&keyboard_tasklet); } -static void __init lk201_info(struct dec_serial *info) +static void __init lk201_info(void *handle) { } -static int __init lk201_init(struct dec_serial *info) +static int __init lk201_init(void *handle) { /* First install handlers. */ - lk201kbd_info = info; - kbd_rate = lk201kbd_rate; - kd_mksound = lk201kd_mksound; + lk201_handle = handle; + kbd_rate = lk201_kbd_rate; + kd_mksound = lk201_kd_mksound; - info->hook->rx_char = lk201_kbd_rx_char; + lk201_hook.rx_char = lk201_rx_char; /* Then just issue a reset -- the handlers will do the rest. */ - lk201_send(info, LK_CMD_POWER_UP); + lk201_send(LK_CMD_POWER_UP); return 0; } void __init kbd_init_hw(void) { - extern int register_zs_hook(unsigned int, struct zs_hook *); - extern int unregister_zs_hook(unsigned int); + int keyb_line; /* Maxine uses LK501 at the Access.Bus. */ if (!LK_IFACE) @@ -428,19 +426,15 @@ printk(KERN_INFO "lk201: DECstation LK keyboard driver v0.05.\n"); - if (LK_IFACE_ZS) { - /* - * kbd_init_hw() is being called before - * rs_init() so just register the kbd hook - * and let zs_init do the rest :-) - */ - if(!register_zs_hook(KEYB_LINE, &lk201_kbdhook)) - unregister_zs_hook(KEYB_LINE); - } else { - /* - * TODO: modify dz.c to allow similar hooks - * for LK201 handling on DS2100, DS3100, and DS5000/200 - */ - printk(KERN_ERR "lk201: support for DZ11 not yet ready.\n"); - } + /* + * kbd_init_hw() is being called before + * rs_init() so just register the kbd hook + * and let zs_init do the rest :-) + */ + if (LK_IFACE_ZS) + keyb_line = KEYB_LINE_ZS; + else + keyb_line = KEYB_LINE_DZ; + if (!register_dec_serial_hook(keyb_line, &lk201_hook)) + unregister_dec_serial_hook(keyb_line); } diff -Nur linux-2.4.32-rc1/drivers/tc/zs.c linux-2.4.32-rc1.mips/drivers/tc/zs.c --- linux-2.4.32-rc1/drivers/tc/zs.c 2005-01-19 15:10:05.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/tc/zs.c 2004-12-27 05:13:50.000000000 +0100 @@ -68,6 +68,8 @@ #include #include #include +#include + #ifdef CONFIG_DECSTATION #include #include @@ -160,8 +162,8 @@ #ifdef CONFIG_SERIAL_DEC_CONSOLE static struct console sercons; #endif -#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) \ - && !defined(MODULE) +#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \ + !defined(MODULE) static unsigned long break_pressed; /* break, really ... */ #endif @@ -196,7 +198,6 @@ /* * Debugging. */ -#undef SERIAL_DEBUG_INTR #undef SERIAL_DEBUG_OPEN #undef SERIAL_DEBUG_FLOW #undef SERIAL_DEBUG_THROTTLE @@ -221,10 +222,6 @@ static struct termios *serial_termios[NUM_CHANNELS]; static struct termios *serial_termios_locked[NUM_CHANNELS]; -#ifndef MIN -#define MIN(a,b) ((a) < (b) ? (a) : (b)) -#endif - /* * tmp_buf is used as a temporary buffer by serial_write. We need to * lock it in case the copy_from_user blocks while swapping in a page, @@ -386,8 +383,6 @@ * ----------------------------------------------------------------------- */ -static int tty_break; /* Set whenever BREAK condition is detected. */ - /* * This routine is used by the interrupt handler to schedule * processing in the software interrupt portion of the driver. @@ -414,20 +409,15 @@ if (!tty && (!info->hook || !info->hook->rx_char)) continue; - if (tty_break) { - tty_break = 0; -#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE) - if (info->line == sercons.index) { - if (!break_pressed) { - break_pressed = jiffies; - goto ignore_char; - } - break_pressed = 0; - } -#endif + flag = TTY_NORMAL; + if (info->tty_break) { + info->tty_break = 0; flag = TTY_BREAK; if (info->flags & ZILOG_SAK) do_SAK(tty); + /* Ignore the null char got when BREAK is removed. */ + if (ch == 0) + continue; } else { if (stat & Rx_OVR) { flag = TTY_OVERRUN; @@ -435,20 +425,22 @@ flag = TTY_FRAME; } else if (stat & PAR_ERR) { flag = TTY_PARITY; - } else - flag = 0; - if (flag) + } + if (flag != TTY_NORMAL) /* reset the error indication */ write_zsreg(info->zs_channel, R0, ERR_RES); } -#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE) +#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \ + !defined(MODULE) if (break_pressed && info->line == sercons.index) { - if (ch != 0 && - time_before(jiffies, break_pressed + HZ*5)) { + /* Ignore the null char got when BREAK is removed. */ + if (ch == 0) + continue; + if (time_before(jiffies, break_pressed + HZ * 5)) { handle_sysrq(ch, regs, NULL, NULL); break_pressed = 0; - goto ignore_char; + continue; } break_pressed = 0; } @@ -459,23 +451,7 @@ return; } - if (tty->flip.count >= TTY_FLIPBUF_SIZE) { - static int flip_buf_ovf; - ++flip_buf_ovf; - continue; - } - tty->flip.count++; - { - static int flip_max_cnt; - if (flip_max_cnt < tty->flip.count) - flip_max_cnt = tty->flip.count; - } - - *tty->flip.flag_buf_ptr++ = flag; - *tty->flip.char_buf_ptr++ = ch; -#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE) - ignore_char: -#endif + tty_insert_flip_char(tty, ch, flag); } if (tty) tty_flip_buffer_push(tty); @@ -517,11 +493,15 @@ /* Get status from Read Register 0 */ stat = read_zsreg(info->zs_channel, R0); - if (stat & BRK_ABRT) { -#ifdef SERIAL_DEBUG_INTR - printk("handling break...."); + if ((stat & BRK_ABRT) && !(info->read_reg_zero & BRK_ABRT)) { +#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \ + !defined(MODULE) + if (info->line == sercons.index) { + if (!break_pressed) + break_pressed = jiffies; + } else #endif - tty_break = 1; + info->tty_break = 1; } if (info->zs_channel != info->zs_chan_a) { @@ -957,7 +937,7 @@ save_flags(flags); while (1) { cli(); - c = MIN(count, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, + c = min(count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, SERIAL_XMIT_SIZE - info->xmit_head)); if (c <= 0) break; @@ -965,7 +945,7 @@ if (from_user) { down(&tmp_buf_sem); copy_from_user(tmp_buf, buf, c); - c = MIN(c, MIN(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, + c = min(c, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, SERIAL_XMIT_SIZE - info->xmit_head)); memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c); up(&tmp_buf_sem); @@ -1282,46 +1262,48 @@ } switch (cmd) { - case TIOCMGET: - error = verify_area(VERIFY_WRITE, (void *) arg, - sizeof(unsigned int)); - if (error) - return error; - return get_modem_info(info, (unsigned int *) arg); - case TIOCMBIS: - case TIOCMBIC: - case TIOCMSET: - return set_modem_info(info, cmd, (unsigned int *) arg); - case TIOCGSERIAL: - error = verify_area(VERIFY_WRITE, (void *) arg, - sizeof(struct serial_struct)); - if (error) - return error; - return get_serial_info(info, - (struct serial_struct *) arg); - case TIOCSSERIAL: - return set_serial_info(info, - (struct serial_struct *) arg); - case TIOCSERGETLSR: /* Get line status register */ - error = verify_area(VERIFY_WRITE, (void *) arg, - sizeof(unsigned int)); - if (error) - return error; - else - return get_lsr_info(info, (unsigned int *) arg); + case TIOCMGET: + error = verify_area(VERIFY_WRITE, (void *)arg, + sizeof(unsigned int)); + if (error) + return error; + return get_modem_info(info, (unsigned int *)arg); - case TIOCSERGSTRUCT: - error = verify_area(VERIFY_WRITE, (void *) arg, - sizeof(struct dec_serial)); - if (error) - return error; - copy_from_user((struct dec_serial *) arg, - info, sizeof(struct dec_serial)); - return 0; + case TIOCMBIS: + case TIOCMBIC: + case TIOCMSET: + return set_modem_info(info, cmd, (unsigned int *)arg); - default: - return -ENOIOCTLCMD; - } + case TIOCGSERIAL: + error = verify_area(VERIFY_WRITE, (void *)arg, + sizeof(struct serial_struct)); + if (error) + return error; + return get_serial_info(info, (struct serial_struct *)arg); + + case TIOCSSERIAL: + return set_serial_info(info, (struct serial_struct *)arg); + + case TIOCSERGETLSR: /* Get line status register */ + error = verify_area(VERIFY_WRITE, (void *)arg, + sizeof(unsigned int)); + if (error) + return error; + else + return get_lsr_info(info, (unsigned int *)arg); + + case TIOCSERGSTRUCT: + error = verify_area(VERIFY_WRITE, (void *)arg, + sizeof(struct dec_serial)); + if (error) + return error; + copy_from_user((struct dec_serial *)arg, info, + sizeof(struct dec_serial)); + return 0; + + default: + return -ENOIOCTLCMD; + } return 0; } @@ -1446,7 +1428,8 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout) { struct dec_serial *info = (struct dec_serial *) tty->driver_data; - unsigned long orig_jiffies, char_time; + unsigned long orig_jiffies; + int char_time; if (serial_paranoia_check(info, tty->device, "rs_wait_until_sent")) return; @@ -1462,7 +1445,7 @@ if (char_time == 0) char_time = 1; if (timeout) - char_time = MIN(char_time, timeout); + char_time = min(char_time, timeout); while ((read_zsreg(info->zs_channel, 1) & Tx_BUF_EMP) == 0) { current->state = TASK_INTERRUPTIBLE; schedule_timeout(char_time); @@ -1714,7 +1697,7 @@ static void __init show_serial_version(void) { - printk("DECstation Z8530 serial driver version 0.08\n"); + printk("DECstation Z8530 serial driver version 0.09\n"); } /* Initialize Z8530s zs_channels @@ -1994,8 +1977,9 @@ * polling I/O routines */ static int -zs_poll_tx_char(struct dec_serial *info, unsigned char ch) +zs_poll_tx_char(void *handle, unsigned char ch) { + struct dec_serial *info = handle; struct dec_zschannel *chan = info->zs_channel; int ret; @@ -2017,8 +2001,9 @@ } static int -zs_poll_rx_char(struct dec_serial *info) +zs_poll_rx_char(void *handle) { + struct dec_serial *info = handle; struct dec_zschannel *chan = info->zs_channel; int ret; @@ -2038,12 +2023,13 @@ return -ENODEV; } -unsigned int register_zs_hook(unsigned int channel, struct zs_hook *hook) +int register_zs_hook(unsigned int channel, struct dec_serial_hook *hook) { struct dec_serial *info = &zs_soft[channel]; if (info->hook) { - printk(__FUNCTION__": line %d has already a hook registered\n", channel); + printk("%s: line %d has already a hook registered\n", + __FUNCTION__, channel); return 0; } else { @@ -2055,7 +2041,7 @@ } } -unsigned int unregister_zs_hook(unsigned int channel) +int unregister_zs_hook(unsigned int channel) { struct dec_serial *info = &zs_soft[channel]; @@ -2063,8 +2049,8 @@ info->hook = NULL; return 1; } else { - printk(__FUNCTION__": trying to unregister hook on line %d," - " but none is registered\n", channel); + printk("%s: trying to unregister hook on line %d," + " but none is registered\n", __FUNCTION__, channel); return 0; } } @@ -2319,22 +2305,23 @@ write_zsreg(chan, 9, nine); } -static int kgdbhook_init_channel(struct dec_serial* info) +static int kgdbhook_init_channel(void *handle) { return 0; } -static void kgdbhook_init_info(struct dec_serial* info) +static void kgdbhook_init_info(void *handle) { } -static void kgdbhook_rx_char(struct dec_serial* info, - unsigned char ch, unsigned char stat) +static void kgdbhook_rx_char(void *handle, unsigned char ch, unsigned char fl) { + struct dec_serial *info = handle; + + if (fl != TTY_NORMAL) + return; if (ch == 0x03 || ch == '$') breakpoint(); - if (stat & (Rx_OVR|FRM_ERR|PAR_ERR)) - write_zsreg(info->zs_channel, 0, ERR_RES); } /* This sets up the serial port we're using, and turns on @@ -2360,11 +2347,11 @@ * for /dev/ttyb which is determined in setup_arch() from the * boot command line flags. */ -struct zs_hook zs_kgdbhook = { - init_channel : kgdbhook_init_channel, - init_info : kgdbhook_init_info, - cflags : B38400|CS8|CLOCAL, - rx_char : kgdbhook_rx_char, +struct dec_serial_hook zs_kgdbhook = { + .init_channel = kgdbhook_init_channel, + .init_info = kgdbhook_init_info, + .rx_char = kgdbhook_rx_char, + .cflags = B38400 | CS8 | CLOCAL, } void __init zs_kgdb_hook(int tty_num) diff -Nur linux-2.4.32-rc1/drivers/tc/zs.h linux-2.4.32-rc1.mips/drivers/tc/zs.h --- linux-2.4.32-rc1/drivers/tc/zs.h 2004-02-18 14:36:31.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/tc/zs.h 2004-07-01 15:28:54.000000000 +0200 @@ -1,14 +1,18 @@ /* - * macserial.h: Definitions for the Macintosh Z8530 serial driver. + * drivers/tc/zs.h: Definitions for the DECstation Z85C30 serial driver. * * Adapted from drivers/sbus/char/sunserial.h by Paul Mackerras. + * Adapted from drivers/macintosh/macserial.h by Harald Koerfgen. * * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au) * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 2004 Maciej W. Rozycki */ #ifndef _DECSERIAL_H #define _DECSERIAL_H +#include + #define NUM_ZSREGS 16 struct serial_struct { @@ -89,63 +93,50 @@ unsigned char curregs[NUM_ZSREGS]; }; -struct dec_serial; - -struct zs_hook { - int (*init_channel)(struct dec_serial* info); - void (*init_info)(struct dec_serial* info); - void (*rx_char)(unsigned char ch, unsigned char stat); - int (*poll_rx_char)(struct dec_serial* info); - int (*poll_tx_char)(struct dec_serial* info, - unsigned char ch); - unsigned cflags; -}; - struct dec_serial { - struct dec_serial *zs_next; /* For IRQ servicing chain */ - struct dec_zschannel *zs_channel; /* Channel registers */ - struct dec_zschannel *zs_chan_a; /* A side registers */ - unsigned char read_reg_zero; - - char soft_carrier; /* Use soft carrier on this channel */ - char break_abort; /* Is serial console in, so process brk/abrt */ - struct zs_hook *hook; /* Hook on this channel */ - char is_cons; /* Is this our console. */ - unsigned char tx_active; /* character is being xmitted */ - unsigned char tx_stopped; /* output is suspended */ - - /* We need to know the current clock divisor - * to read the bps rate the chip has currently - * loaded. + struct dec_serial *zs_next; /* For IRQ servicing chain. */ + struct dec_zschannel *zs_channel; /* Channel registers. */ + struct dec_zschannel *zs_chan_a; /* A side registers. */ + unsigned char read_reg_zero; + + struct dec_serial_hook *hook; /* Hook on this channel. */ + int tty_break; /* Set on BREAK condition. */ + int is_cons; /* Is this our console. */ + int tx_active; /* Char is being xmitted. */ + int tx_stopped; /* Output is suspended. */ + + /* + * We need to know the current clock divisor + * to read the bps rate the chip has currently loaded. */ - unsigned char clk_divisor; /* May be 1, 16, 32, or 64 */ - int zs_baud; + int clk_divisor; /* May be 1, 16, 32, or 64. */ + int zs_baud; - char change_needed; + char change_needed; int magic; int baud_base; int port; int irq; - int flags; /* defined in tty.h */ - int type; /* UART type */ + int flags; /* Defined in tty.h. */ + int type; /* UART type. */ struct tty_struct *tty; int read_status_mask; int ignore_status_mask; int timeout; int xmit_fifo_size; int custom_divisor; - int x_char; /* xon/xoff character */ + int x_char; /* XON/XOFF character. */ int close_delay; unsigned short closing_wait; unsigned short closing_wait2; unsigned long event; unsigned long last_active; int line; - int count; /* # of fd on device */ - int blocked_open; /* # of blocked opens */ - long session; /* Session of opening process */ - long pgrp; /* pgrp of opening process */ + int count; /* # of fds on device. */ + int blocked_open; /* # of blocked opens. */ + long session; /* Sess of opening process. */ + long pgrp; /* Pgrp of opening process. */ unsigned char *xmit_buf; int xmit_head; int xmit_tail; diff -Nur linux-2.4.32-rc1/drivers/video/au1200fb.c linux-2.4.32-rc1.mips/drivers/video/au1200fb.c --- linux-2.4.32-rc1/drivers/video/au1200fb.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.4.32-rc1.mips/drivers/video/au1200fb.c 2005-03-13 09:04:16.000000000 +0100 @@ -0,0 +1,1564 @@ +/* + * BRIEF MODULE DESCRIPTION + * Au1200 LCD Driver. + * + * Copyright 2004 AMD + * Author: AMD + * + * Based on: + * linux/drivers/video/skeletonfb.c -- Skeleton for a frame buffer device + * Created 28 Dec 1997 by Geert Uytterhoeven + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include "au1200fb.h" + +#include