From d3063c1ec65b37b45e808313133196185ea4901f Mon Sep 17 00:00:00 2001 From: mokopatches Date: Fri, 4 Apr 2008 11:30:03 +0100 Subject: [PATCH] fix-i2c-s3c2410-resume-race.patch fix-i2c-s3c2410-resume-race.patch There is a nasty race between i2c-s3c2410 resume and resume of I2C driver and the client drivers -- the watchdog device actually gets to use the dead I2C bus before it is reinitialized by the I2C driver resume! This patch makes sure any customers get turned away until the shopkeeper has woken up. Signed-off-by: Andy Green --- drivers/i2c/busses/i2c-s3c2410.c | 35 ++++++++++++++++++++++++++++++++++- 1 files changed, 34 insertions(+), 1 deletions(-) diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index c44ada5..5ac8309 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -71,6 +71,8 @@ struct s3c24xx_i2c { struct resource *irq; struct resource *ioarea; struct i2c_adapter adap; + + int suspended; }; /* default platform data to use if not supplied in the platform_device @@ -156,6 +158,14 @@ static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c) unsigned long tmp; tmp = readl(i2c->regs + S3C2410_IICCON); + +/* S3c2442 datasheet + * + * If the IICCON[5]=0, IICCON[4] does not operate correctly. + * So, It is recommended that you should set IICCON[5]=1, + * although you does not use the IIC interrupt. + */ + writel(tmp & ~S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON); } @@ -282,7 +292,7 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) case STATE_STOP: dev_err(i2c->dev, "%s: called in STATE_STOP\n", __FUNCTION__); - s3c24xx_i2c_disable_irq(i2c); + s3c24xx_i2c_disable_irq(i2c); goto out_ack; case STATE_START: @@ -502,6 +512,14 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int unsigned long timeout; int ret; + if (i2c->suspended) { + dev_err(i2c->dev, + "Hey I am still asleep (suspended: %d), retry later\n", + i2c->suspended); + ret = -EAGAIN; + goto out; + } + ret = s3c24xx_i2c_set_master(i2c); if (ret != 0) { dev_err(i2c->dev, "cannot get bus (error %d)\n", ret); @@ -886,6 +904,17 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev) } #ifdef CONFIG_PM + +static int s3c24xx_i2c_suspend(struct platform_device *dev, pm_message_t state) +{ + struct s3c24xx_i2c *i2c = platform_get_drvdata(dev); + + if (i2c != NULL) + i2c->suspended++; + + return 0; +} + static int s3c24xx_i2c_resume(struct platform_device *dev) { struct s3c24xx_i2c *i2c = platform_get_drvdata(dev); @@ -893,6 +922,8 @@ static int s3c24xx_i2c_resume(struct platform_device *dev) if (i2c != NULL) s3c24xx_i2c_init(i2c); + i2c->suspended--; + return 0; } @@ -905,6 +936,7 @@ static int s3c24xx_i2c_resume(struct platform_device *dev) static struct platform_driver s3c2410_i2c_driver = { .probe = s3c24xx_i2c_probe, .remove = s3c24xx_i2c_remove, + .suspend = s3c24xx_i2c_suspend, .resume = s3c24xx_i2c_resume, .driver = { .owner = THIS_MODULE, @@ -915,6 +947,7 @@ static struct platform_driver s3c2410_i2c_driver = { static struct platform_driver s3c2440_i2c_driver = { .probe = s3c24xx_i2c_probe, .remove = s3c24xx_i2c_remove, + .suspend = s3c24xx_i2c_suspend, .resume = s3c24xx_i2c_resume, .driver = { .owner = THIS_MODULE, -- 1.5.6.5