Commit Graph

11791 Commits (fe6e2f8e1b1f48e0fa2d11127ecab95e6e33f630)

Author SHA1 Message Date
John Crispin 1978620045 kernel: add a ubi forced detach ioctl
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40417
2014-04-07 15:10:18 +00:00
Felix Fietkau 8be7f487e2 ar71xx: move some always-used led related functionality from kmod packages to the kernel image
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40413
2014-04-07 10:44:52 +00:00
Felix Fietkau 4a9ea80ef0 /lib/functions.sh: move rarely used mtd and macaddr related functions to /lib/functions/system.sh
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40411
2014-04-07 10:29:47 +00:00
Felix Fietkau 7131a104f5 ar71xx: add support for the TP-LINK TL-WR841N/ND v9
Everything seems to be working fine. Potential issues:

* VLAN port IDs are reversed with regard to the numbers on the case.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 40400
2014-04-07 08:00:02 +00:00
Felix Fietkau f80f0c7d22 ar71xx: add support for QCA953x SoC
I don't have access to the specs, so I'm not sure about every detail, but I
haven't seen any problems with my test system, a TL-WR841N v9. It looks pretty
much like a QCA955x without PCI, a little twist in the clock calculation and
a AR9331-compatible switch.

Features not yet supported:

* EHCI (my test system doesn't have USB)
* ? (I have no idea if the QCA953x has any other features I don't know about
that aren't used by the TL-WR841N v9)

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 40399
2014-04-07 07:59:45 +00:00
Jonas Gorski dba8a58b46 brcm63xx: hack around jffs2 corruption with SMP
mempy_fromio seems to be randomly failing when the destination is
unaligned; work around it by forcing the name to be aligned in memory.

Should fix jffs2 and SMP for now, but needs to be some additional
looking into as it does not fix the source.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 40396
2014-04-06 22:03:42 +00:00
John Crispin c821836395 lantiq: remove unmaintained code
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40392
2014-04-06 09:21:44 +00:00
Felix Fietkau 8f41856f1f ramips: fix regression from r39949 (#15382)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40391
2014-04-06 00:09:50 +00:00
Jonas Gorski 663083d930 brcm63xx: sync mips counters during bringup of cpus
Fixes gettimeofday returning different values depending on which cpu
it is called.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 40387
2014-04-05 18:32:34 +00:00
John Crispin f464b7d176 lantiq: cleanup the dsl control scripts
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40381
2014-04-05 16:34:20 +00:00
Jonas Gorski b519908e84 brcm63xx: update development kernel to linux 3.14
Now that 3.13 will be EOL soon, switch to 3.14.

Known issues:
 * 74x164 is not available because upstream dropped non-DT support
 * jffs2 breaks with SMP

Unknown issues:
 * probably plenty

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 40380
2014-04-04 10:17:08 +00:00
Jonas Gorski a8363fadcd kernel: make sched_act_connmark compile for 3.14
The upstream API changed, which allowed to simplify the code a bit.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 40376
2014-04-04 10:16:49 +00:00
Jonas Gorski 96c4e3eed0 kernel: make sched_esfq compile for 3.14
net_random was replaced with prandom_u32.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 40375
2014-04-04 10:16:47 +00:00
Jonas Gorski e24b601b56 kernel: add missing config symbol for linux 3.14
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 40374
2014-04-04 10:16:44 +00:00
John Crispin a05356f48a lantiq: nand fixes
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40372
2014-04-03 14:27:02 +00:00
John Crispin 15139d468c lantiq: BT Home Hub 2B support - userspace
Basic userspace configuration for BT Home Hub 2B

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 40371
2014-04-03 14:26:58 +00:00
John Crispin 709cab91d2 lantiq: BT Home Hub 2B support - board support
Board support patch for BT Home Hub 2B

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 40370
2014-04-03 14:26:54 +00:00
John Crispin 469b8297fa lantiq: BT Home Hub 2B support - jedec probe
Lantiq nor patch. Adds support for jedec probing if cfi
probing fails.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 40369
2014-04-03 14:26:50 +00:00
John Crispin 78a7ae428f lantiq: make td8970 wifi led work
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40368
2014-04-03 14:26:46 +00:00
John Crispin 58eccdac4f lantiq: fix vr9 ubi handling
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40364
2014-04-03 14:26:24 +00:00
Felix Fietkau 78a3f697a5 x86: xen_domu is functional, remove broken flag
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40363
2014-04-02 20:45:09 +00:00
Florian Fainelli c18cc9aa49 orion: create a macro for zImage with machine id
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 40360
2014-04-01 22:21:11 +00:00
Florian Fainelli 3d0ec6bd08 orion: fix KERNELNAME
uImage cannot be built in parallel properly until zImage is ready

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 40359
2014-04-01 22:21:00 +00:00
Florian Fainelli 5b6d0b1818 orion: fix initramfs uImage generation
We would fail to copy an non-existent uImage-initramfs to $(BIN_DIR)

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 40358
2014-04-01 22:20:49 +00:00
Imre Kaloz 36fefbb60e 3.14 final is out
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 40352
2014-03-31 13:43:06 +00:00
Hauke Mehrtens bdde12b13a kernel: backport BCM5357 fix for GPIOs
This backports: bcma: gpio: register 32 GPIOs on BCM5357

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40347
2014-03-30 19:08:37 +00:00
Hauke Mehrtens c286feac80 brcm47xx: backport 3.14 patch for nvram GPIO pin read
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40346
2014-03-30 19:07:46 +00:00
Hauke Mehrtens 499d1f1401 brcm47xx: Name LEDs colors for Linksys E1000 V2.1
Handle it by creating a new patch for simple database changes.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40345
2014-03-30 19:07:13 +00:00
Hauke Mehrtens a1f4a43cef brcm47xx: update workarounds patch to V3
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40344
2014-03-30 19:06:24 +00:00
John Crispin 5b6ceab69b ralink: fix chuncked-io module
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40342
2014-03-30 19:03:55 +00:00
John Crispin 3972b47458 revert: kernel: rtl8306: fix max pvid & remove port isolation
apparently this one was nt a good idea to merge

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40330
2014-03-30 10:04:55 +00:00
John Crispin e36568e74b lntiq: add support for Astoria ARV7519RW.
These patches add support for the Astoria ARV7519RW aka Livebox 2.1
The PCI and PCIe interfaces have been disabled. Also, because there are
two revisions of this board with different GPHY firmwares, two targets
were defined.
V2: rewrote partitions to work with an u-boot specifically made for
these boards.

Signed off by: Esteban Benito <estebanjbs@gmail.com>
Signed off by: Carles Gadea <carlesgrg@gmail.com>
Tested by: José Vázquez Fernández <ppvazquezfer@gmail.com>

SVN-Revision: 40329
2014-03-30 10:02:30 +00:00
John Crispin 42e8cb6388 lantiq: do an endianness swap to the RT2860 eeprom for ARV752DPW(22)
ARV7510PW22, ARV752DPW and ARV752DPW22 have the RT2860 eeprom stored in
flash as big-endian, but the driver needs it in little-endian format. We
have to swab it before handing it over. This requires my earlier patch
for busybox.

Funnily enough, ARV752DPW works also with the incorrect eeprom, but
undoubtedly unoptimally. I have a hunch that also the final remaining
Lantiq board would require this swabbing, but I'm not sure, so I just
swab it in the three boards that I know about.

v2:
* Swab also on ARV7510PW22 based on feedback from Alvaro Rojas
* Fix the offset with bs=2

Signed-off-by: Matti Laakso <malaakso at elisanet.fi>

SVN-Revision: 40328
2014-03-30 09:16:52 +00:00
John Crispin 5a6268c078 lantiq: add esi
http://patchwork.openwrt.org/patch/3703/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40326
2014-03-30 09:16:43 +00:00
John Crispin 8b0507c9ca lantiq: fix mtd_split for brnboot firmware images
The existing code only tries to split a parition with name "rootfs"
while actually looking for kernel+rootfs, where usually "firmware" is
used as a partition name. This doesn't make sense, as even if there
was a partition 'rootfs' given by mtdparts or via device-tree, this
code would lead to another partition called 'rootfs' being created
which would not be properly distinguished in the current user-space
code.

While potentially we could use CONFIG_MTD_SPLIT_FIRMWARE_NAME to make
that configurable, the lack of users of brnboot and the fact that we
can freely decide the partition name made me simply change the
hard-coded string constant from "rootfs" to "firmware".

(I'm going to add support for ARV7506PW which run brnboot and needs
this change)

SVN-Revision: 40324
2014-03-30 09:16:35 +00:00
John Crispin 0c73e85cd0 lantiq: fixup ath5k support
http://patchwork.openwrt.org/patch/4417/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40323
2014-03-30 09:16:31 +00:00
John Crispin 112059073e lantiq: fix initial VLAN conf for P2601HNFX
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40321
2014-03-30 09:16:23 +00:00
John Crispin 5a98a6b9cf lantiq: P2601HNFX dts update for STP and buttons
- Set correct AltSel for STP pins
- Set front button to rfkill

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40320
2014-03-30 09:16:19 +00:00
John Crispin e733242a23 lantiq: add support for Arcadyan ARV7519PW
This patch adds almost full support for this board.

- WiFi is still not working
- USB will not power up. According to some reports, it may be a passive port

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40319
2014-03-30 09:16:15 +00:00
John Crispin 3a43738e21 lantiq: reset gphys on reboot
If gphys are not reset upstream uboot can not use them anymore.

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40318
2014-03-30 09:16:10 +00:00
John Crispin 9531390aad lantiq: add support for ZyXEL P2812HNUFX
This patch adds almost full support for this board. WiFi is still not working.
The FXS ports are not functional due to missing support for the TAPI driver on
VR9 SoC.

Signed-off-by: Antonios Vamporakis <ant@area128.com>
Tested-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40317
2014-03-30 09:16:06 +00:00
John Crispin 9b78e13aa3 lantiq: add ubifs support in image Makefile
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40316
2014-03-30 09:16:02 +00:00
John Crispin 2803e79be6 lantiq: add ubifs to FEATURES
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40315
2014-03-30 09:15:58 +00:00
John Crispin 07eb49b7e0 lantiq: xrx200: add ubi support in the kernel
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40314
2014-03-30 09:15:54 +00:00
John Crispin 82da5ca248 lantiq: add inital support for xrx200 switch
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40313
2014-03-30 09:15:50 +00:00
John Crispin 32e2246270 lantiq: xrx200: fix duplex
Both the GPL driver from ZyXEL and the xrx200 driver have this error. The flags
are reversed. Full duplex is marked as half and the other way around. With this
fix the switch will push full GBit speeds.

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40312
2014-03-30 09:15:46 +00:00
John Crispin 93e5c8cefc lantiq: fixup 3370 dts file
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40311
2014-03-30 09:15:41 +00:00
John Crispin 561a7ef93b lantiq: fix nand/ebu locking
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40310
2014-03-30 09:15:37 +00:00
John Crispin d6a138141c lantiq: add tffs driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40309
2014-03-30 09:15:33 +00:00
John Crispin bc03add273 kernel: export gluebi info to sysfs
Export the ubi_num and vol_id into the sysfs record of the gluebi-
emulated mtd device. Previously userspace didn't have a way to
map gluebi-emulated devices back to their corresponding ubi volumes.

SVN-Revision: 40306
2014-03-30 09:15:20 +00:00
John Crispin deba38f2a7 kernel: rtl8306: fix vlan support on lantiq ar9 p2601hnfx
If the CPU port is not forced up, the link, at least on this board, is lost after
changes are applied. This makes sure that the link is restored. Regression tests
should confirm it doesn't break other boards.

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40305
2014-03-30 09:15:16 +00:00
John Crispin 72cdb34ae8 kernel: rtl8306: fix max pvid & remove port isolation
- hide port pvid - vlan index relation
- switch initialises with vlans disabled so port isolation is not used
- remove special treatment of cpu port

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40304
2014-03-30 09:15:11 +00:00
John Crispin 6a72dc4082 kernel: rtl8306: cosmetic changes for swconfig
Changes to:
- show the correct "enable_vlan" value under "Global attributes"
- show tagged ports under "Vlan: ports"
- use get_port_link method to report link status

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40303
2014-03-30 09:15:07 +00:00
John Crispin defdec0f3a lantiq: drop old svip folders
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40294
2014-03-27 13:34:56 +00:00
Gabor Juhos 627baa28d3 kernel: update 3.10 to 3.10.34
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
2014-03-27 09:28:33 +00:00
Gabor Juhos b68564ed3f ar71xx: build image for TL-WDR4300v1 (IL)
The version of TL-WDR4300 sold in Israel comes with a different
hardware id.

Patch-by: Daniel <daniel@makrotopia.org>
Patchwork: http://patchwork.openwrt.org/patch/5001/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40038
2014-03-27 06:36:59 +00:00
Gabor Juhos 4ea54b827f ar71xx: add profile and build firmware image for the Oolite v1 board
Patch-by: Lars Bøgild Thomsen <lth@cow.dk>
Patchwork: http://patchwork.openwrt.org/patch/4922/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40036
2014-03-27 06:36:57 +00:00
Gabor Juhos 02f2e90d5f ar71xx: add user space support for the Oolite v1 board
Patch-by: Lars Bøgild Thomsen <lth@cow.dk>
Patchwork: http://patchwork.openwrt.org/patch/4922/
[juhosg: use correct board name in uci-defaults/02_network]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40033
2014-03-27 06:36:47 +00:00
Gabor Juhos 5256bbdc56 ar71xx: add kernel support for the Oolite v1 board
Patch-by: Lars Bøgild Thomsen <lth@cow.dk>
Patchwork: http://patchwork.openwrt.org/patch/4922/
[juhosg:
 - use a separate patch for kernel changes,
 - reorder Kconfig and Makefile entries,
 - change function and variable names to be lowercase only
   and fix misaligned tabs in mach-gs-oolite.c,
   ... ]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40032
2014-03-27 06:36:46 +00:00
Gabor Juhos f0dc89b46f ar71xx: rename RB951Ui specific kernel patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40031
2014-03-27 06:35:55 +00:00
Imre Kaloz 132f7d3cc9 update to 3.14-rc8
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 40023
2014-03-26 14:14:20 +00:00
Imre Kaloz b8e295aa7b upgrade 3.13 targets to 3.13.7
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 40022
2014-03-26 11:34:39 +00:00
Felix Fietkau 7c78ab8c21 x86_64: fix sysupgrade
Function move_config should be called after or during preinit_mount_root
hook in do_mount_root function. At this state sysupgrade.tgz is not in its
place during that time when do_mount_root is called. Function move_config
is called later so the sysupgrade.tgz stays in root directory to the second
restart when it is unpacked properly.

This patch adds move_config function to preinit_mount_root hook instead
of preinit_main and changes the filename of script to be called before
80_mount_root is called. It will prepare the sysupgrade archive for do_mount_root
within preinit_mount_root hook.

This issue was introduced for target x86. Since the target for x86_64 is
similar to x86, this issue is present also in this target. It solves the
ticket #15042 and #14088.

Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
Tested-By: Stefan Hellermann <stefan@the2masters.de>

SVN-Revision: 39997
2014-03-21 15:55:11 +00:00
Felix Fietkau a14437024c x86: fix sysupgrade
Function move_config should be called after or during preinit_mount_root
hook in do_mount_root function. At this state sysupgrade.tgz is not in its
place during that time when do_mount_root is called. Function move_config
is called later so the sysupgrade.tgz stays in root directory to the second
restart when it is unpacked properly.

This patch adds move_config function to preinit_mount_root hook instead
of preinit_main and changes the filename of script to be called before
80_mount_root is called. It will prepare the sysupgrade archive for do_mount_root
within preinit_mount_root hook.

This patch solves ticket #15042 and #14088.

Signed-off-by: Jiri Slachta <slachta@cesnet.cz>

SVN-Revision: 39996
2014-03-21 15:55:07 +00:00
Zoltan Herpai a51ffcc1d1 sunxi: init eth0 as lan instead of wan, add a couple boards
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39973
2014-03-20 22:46:18 +00:00
Zoltan Herpai 73f14ca63b sunxi: enable /proc/device-tree - used for board detection
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39972
2014-03-20 21:59:52 +00:00
Zoltan Herpai 0534e2c79c sunxi: various changes - fix mmc, sata, usb (partially) on CubieTruck - fix hstimer DT on A20
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com>

SVN-Revision: 39971
2014-03-20 21:40:07 +00:00
Felix Fietkau 479b0c82a2 kernel/generic: fix define in 642-bridge_port_isolate.patch
Patch 642-bridge_port_isolate.patch needs to be updated
for kernels 3.12, 3.13 and 3.14 as the define for BR_ISOLATE_MODE
conflicts with BR_LEARNING

Signed-off-by: Jonas Eymann <j.eymann@gmx.net>

SVN-Revision: 39955
2014-03-19 14:26:48 +00:00
John Crispin 4835ea949f ralink: add missing OF node
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39950
2014-03-18 19:22:13 +00:00
John Crispin 332b94fbd5 ralink: refresh patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39949
2014-03-18 19:21:56 +00:00
Imre Kaloz 8a97da18e0 switch the am335x-evmsk to the new wlcore bindings
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39948
2014-03-18 19:05:37 +00:00
Imre Kaloz aabce5cf6a switch to the newer DT bindings for wl1xxx
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39946
2014-03-18 18:54:27 +00:00
Zoltan Herpai 18ab115d89 sunxi: fix mmc support on sun4i
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39943
2014-03-17 22:32:42 +00:00
Hauke Mehrtens fbb5b8af8e kernel: fix 990-gpio_wdt.patch patch
This uses the correct include now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39906
2014-03-12 23:29:42 +00:00
Hauke Mehrtens 00dc53dd2e brcm47xx: add initial support for kernel 3.14
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39905
2014-03-12 23:28:41 +00:00
Hauke Mehrtens 128bb9f1a3 kernel: add missing config options for kernel 3.14
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39904
2014-03-12 23:16:27 +00:00
Florian Fainelli f664976483 kernel: backport ARM memset fixes for GCC 4.7/4.8
Now that GCC 4.8 is the default, make sure that we have the relevant
memset fixes to avoid nasty kernel crashes.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39902
2014-03-12 22:08:59 +00:00
John Crispin 375e02ac3d ralink: add missing clk_set_rate()
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39896
2014-03-12 19:33:01 +00:00
Imre Kaloz 8411a5703f Add GW2385 support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39894
2014-03-12 13:40:13 +00:00
Imre Kaloz b85310df77 add GW2375 support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39893
2014-03-12 13:39:06 +00:00
Imre Kaloz 68022cac64 various dwc (OTG) driver fixups
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39892
2014-03-12 13:37:40 +00:00
Gabor Juhos 47dfbb5bc6 ar71xx: rb95x: use correct SPI flash address
The flash address passed to rb_init_info() is bogus,
use the predefined AR71XX_SPI_BASE macro instead.

Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39891
2014-03-12 12:52:39 +00:00
Gabor Juhos 25e870eed6 ar71xx: ar934x_nfc: fix memory initialization bug
sizeof(array_from_function_definition) gives back the size of the pointer.
sizeof(type)  * array_size   should be used in memset.

Signed-off-by: David Völgyes <david.volgyes@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4950/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39890
2014-03-12 12:52:36 +00:00
Luka Perkov c8b116d930 kernel/generic: drop already upstreamed patch
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39855
2014-03-10 01:06:48 +00:00
Florian Fainelli f71fa7d646 brcm47xx: explicitely mention MIPS to avoid confusion
And while at it, fix the nomenclature, BCM947xx/953xx refer to specific boards,
while BCM47xx/BCM53xx refer to chip identification number.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39841
2014-03-08 01:48:44 +00:00
Imre Kaloz 074af75668 add preliminary 3.14 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39789
2014-03-07 11:27:00 +00:00
John Crispin 96fa58bafd ralink: add support for wrtnode
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39786
2014-03-07 09:54:59 +00:00
Zoltan Herpai d100f80e7b sunxi: update 3.13 defconfig to include lradc driver
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39783
2014-03-06 11:33:43 +00:00
Zoltan Herpai ac4b9dbb3c sunxi: driver refresh for 3.13 - update gmac / mmc / usb / ahci drivers to follow mainline dev trees - add driver for spi - update clock support - update a31 support - move to new DT compats where appropriate - re-order patchqueue where needed - verified working a20 smp - move most DTSes off files/ - update defconfig
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39782
2014-03-06 00:09:30 +00:00
Zoltan Herpai 2c771cc71f kernel: add missing config symbols to 3.13
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39781
2014-03-05 23:32:00 +00:00
Zoltan Herpai 301baf34dd sunxi: deprecate 3.12 support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39780
2014-03-05 23:19:25 +00:00
Felix Fietkau bbc0c67bb0 cns3xxx: fix uImage build issue
The uImage target will always fail on a clean build due to dependency issues.
Building the uImage isn't necessary anyway as its re-built with correct
entry points in image/Makefile so remove it.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39778
2014-03-05 17:37:43 +00:00
Florian Fainelli bb39b8d99a brcm2708: update against latest rpi-3.10.y branch
Update our copies of the brcm2708 patches to the latest rpi-3.10-y
rebased against linux-3.10.y stable (3.10.32). This should hopefully
make it easier for us in the future to leverage the raspberry/rpi-*
branches.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39770
2014-02-28 20:30:08 +00:00
Florian Fainelli 2d32b2f771 brcm2708: define KERNELNAME accordingly
Define KERNELNAME to Image to get the build system to copy this image
over $(KDIR) automatically for us.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39768
2014-02-28 20:29:40 +00:00
Felix Fietkau 802d17ceaf ar71xx: Add 16MB Flash version for Embedded Wireless Dorin Platform
Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>

SVN-Revision: 39764
2014-02-28 11:08:14 +00:00
Felix Fietkau d83750083d ar71xx: adjust ew-dorin platform for LAN+WAN setup
Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>

SVN-Revision: 39763
2014-02-28 11:08:04 +00:00
Felix Fietkau 8665c57923 cns3xxx: ethernet - clean up tx descs only when needed
We already clean up tx descriptors in the napi eth_poll() function so it
would likely be rare to run out of available descriptors in eth_xmit. Thus
we can clean them up only when needed and return busy only when we
still don't have enough.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39762
2014-02-27 23:02:43 +00:00
Felix Fietkau 96eb3d883d cns3xxx: ethernet - resolve SMP issue
The combination of r35942 and r35952 causes an issue where eth_schedule_poll()
can be called from a different CPU between the call to napi_complete() and the
setting of cur_index which can break the rx ring accounting and cause ethernet
latency and/or ethernet stalls.  The issue can be easilly created by adding
a couple of artificial delays such as:

@@ -715,6 +715,7 @@ static int eth_poll(struct napi_struct *napi, int budget)

 	if (!received) {
 		napi_complete(napi);
+udelay(1000);
 		enable_irq(IRQ_CNS3XXX_SW_R0RXC);
 	}

@@ -727,6 +728,7 @@ static int eth_poll(struct napi_struct *napi, int budget)
 	rx_ring->cur_index = i;

 	wmb();
+udelay(1000);
 	enable_rx_dma(sw);

 	return received;

This patch moves the setting of cur_index back up where it needs to be and
addresses the original corner case that r35942 was trying to catch in an
improved fashion by checking to see if the rx descriptor ring has become
full before interrupts were re-enabled so that a poll can be scheduled again
and avoid an rx stall caused by rx interrupts ceasing to fire again.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39761
2014-02-27 23:02:37 +00:00
Luka Perkov f7f117b88d imx6: optimize for NEON FPU hardware
The IMX6 SoC uses an ARM Cortext-A9 which has both NEON and VFPv3 hardware
blocks.  This will tune gcc to use neon instead of vfpv3 which will outperform
VFPv3.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39760
2014-02-27 22:41:40 +00:00
Luka Perkov 6752d4cb08 imx6: enable FPU for hard float
The OpenWrt build system uses MACHINE_FEATURES of fpu to set the HAS_FPU which
in turn sets the default of CONFIG_SOFT_FLOAT as well as uClibc configuration.
As the IMX6 SoC has both vfpv3 and NEON hardware support we want to add fpu
to the feature list.  This will default the IMX6 target to use -mfloat-abi=hard
which will the be most efficient use of floating point.

When switching to hard float, we also need to enable VFP support in the kernel.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39759
2014-02-27 22:41:39 +00:00
Florian Fainelli 2d9ded9f2c realview: fix zImage-initramfs installation
We were copying the actual vmlinux-initramfs.elf kernel which cannot be
launched by QEMU or a real bootloader, use zImage-initramfs instead.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39756
2014-02-27 00:12:53 +00:00
Gabor Juhos e9c80a1224 ar71xx: fix failsafe acces on several devices
The ar71xx platform always uses the eth0 interface to provide
access to the device in failsafe mode. Due to this, failsafe
access is broken on devices where the LAN ports are connected
to the 'eth1' interface.

Update the relevant script to correctly set the ifname variable
for these devices.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39752
2014-02-25 17:40:04 +00:00
Jonas Gorski 0d120f42da brcm63xx: add preliminary support for 3.13
Add support for 3.13 as a development kernel. Mostly untested, only net
booted. If flashed may brick your router or kill your cat.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39746
2014-02-24 15:54:12 +00:00
Jonas Gorski 8ffe7e9d41 kernel: add missing config symbol to 3.13
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39745
2014-02-24 15:53:58 +00:00
Gabor Juhos 8a87474b6e x86/rdc: remove old kernel config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39737
2014-02-23 21:16:04 +00:00
Gabor Juhos 9350e4cafa x86/rdc: switch to 3.10 and add broken flag
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39736
2014-02-23 21:16:03 +00:00
Gabor Juhos 1329a18eec x86/rdc: add config for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39735
2014-02-23 21:16:02 +00:00
Gabor Juhos 6d530eef5d x86: fix MTD API usage in the RDC specific board patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39734
2014-02-23 21:15:56 +00:00
Hauke Mehrtens 5b388e5716 brcm47xx: b44: some fixes in combination with the switch
Let the switch start the carrier and set the duplex mode independently
if this nic is up of not.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39733
2014-02-23 18:51:56 +00:00
Gabor Juhos a90ec7a0ef x86/olpc: remove old kernel config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39732
2014-02-23 18:20:32 +00:00
Gabor Juhos a485bd350b x86/olpc: switch to 3.10 and add broken flag
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39731
2014-02-23 18:20:30 +00:00
Gabor Juhos 543fc517f4 x86/olpc: add config for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39730
2014-02-23 18:20:29 +00:00
Gabor Juhos c384015892 x86/net5501: remove old kernel config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39729
2014-02-23 18:09:33 +00:00
Gabor Juhos 3488372fa7 x86/net5501: switch to 3.10 and add broken flag
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39728
2014-02-23 18:09:32 +00:00
Gabor Juhos 8dc438ea7f x86/net5501: add config for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39727
2014-02-23 18:09:31 +00:00
Hauke Mehrtens f587bacc26 brcm47xx: b44: start the phy
We did not start the PHY when an external phy was in use. Without this
patch the driver uses half duplex mode and the switch uses full duplex
mode, which causes problems.
Thank you fback for spotting this problem.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39719
2014-02-23 16:58:12 +00:00
Hauke Mehrtens 15a7efa119 brcm47xx: fix detection of some Linksys WRT54G* devices
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39718
2014-02-23 15:57:37 +00:00
Gabor Juhos 455ee13faf x86/thincan: remove old kernel config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39717
2014-02-23 13:07:24 +00:00
Gabor Juhos d5ab9b12bf x86/thincan: switch to 3.10 and add broken flag
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39716
2014-02-23 13:07:23 +00:00
Gabor Juhos b8061d4e8e x86/thincan: add config for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39715
2014-02-23 13:07:22 +00:00
Gabor Juhos 4ae644c137 x86/xen_domu: remove old kernel config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39714
2014-02-23 13:00:23 +00:00
Gabor Juhos 24ef414bec x86/xen_domu: switch to 3.10 and add broken flag
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39713
2014-02-23 13:00:21 +00:00
Gabor Juhos f333739c24 x86/xen_domu: add config for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39712
2014-02-23 13:00:16 +00:00
Gabor Juhos c0405b152f x86/geos: remove old kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39711
2014-02-23 12:50:19 +00:00
Gabor Juhos a7db713477 x86/geos: switch to 3.10 and add broken flag
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39710
2014-02-23 12:50:18 +00:00
Gabor Juhos 944edb47f9 x86/geos: add config for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39709
2014-02-23 12:50:16 +00:00
Gabor Juhos b5fdd769f0 brcm63xx: update LINUX_VERSION to 3.10.32
Missed from the previous comit.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39708
2014-02-23 11:07:58 +00:00
Gabor Juhos f677b1bc7e kernel: update 3.10 to 3.10.32
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
2014-02-23 10:59:40 +00:00
Gabor Juhos 590bafe3de ar71xx: define status LED for the RB91x boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39705
2014-02-23 08:11:54 +00:00
Gabor Juhos da2f3c1448 ar71xx: rb91x: register GPIO LEDs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39704
2014-02-23 08:11:53 +00:00
Gabor Juhos 14d95026b2 ar71xx: rb91x: add SPI device for the serial shift register
The RB91x boards are using a serial shift register
connected to the SPI bus to drive some of the LEDs.

Rework the board setup code to register a SPI device
for that. This makes it possible to use the 'spi-74x164'
driver to control the device.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39703
2014-02-23 08:11:52 +00:00
Gabor Juhos 7b89005f0d ar71xx/mikrotik: enable the 74x164 GPIO driver
That will be used to drive the 74HC595 serial-in/parallel-out
8-bits shift register which can be found on some RouterBOARDs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39702
2014-02-23 08:11:50 +00:00
Gabor Juhos 5f224ef8a3 ar71xx: improve platform device support in the gpio-74x164 driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39701
2014-02-23 08:11:49 +00:00
Gabor Juhos 3d906ac6ac ar71xx: rb91x-nand: rewrite to use GPIO API
Rewrite tha rb91x-nand driver to use GPIO API to
modify the NAND control lines.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39700
2014-02-23 07:19:32 +00:00
Gabor Juhos 8fea668cb7 ar71xx: rb91x: register a gpio-latch platform device
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39699
2014-02-22 18:05:32 +00:00
Gabor Juhos da5caba072 ar71xx/mikrotik: enable the GPIO latch driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39698
2014-02-22 18:05:31 +00:00
Gabor Juhos ab08c40487 ar71xx: add a generic GPIO latch driver
It will be used for the Mikrotik boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39697
2014-02-22 18:05:29 +00:00
Gabor Juhos be18a3849b ar71xx/mikrotik: enable small sector erase in the m25p80 driver
The serial flash devices used on the ROuterBOARDs are
supporting 4KiB erase blocks. Enable the small sector
erase option in the m25p80 driver to avoid superfluous
erase/write of adjacent blocks.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39696
2014-02-22 16:26:55 +00:00
Gabor Juhos b7539ab109 ar71xx: spi-ath79: fix initial GPIO CS line setup
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39695
2014-02-22 16:17:28 +00:00
Gabor Juhos 3e6c7ed4f2 ar71xx: refresh unaligned access hacks patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39694
2014-02-22 16:17:27 +00:00
Nicolas Thill 86f5a9cf78 target/sunxi: add dependency on sunxi to kmod-wdt-sunxi
SVN-Revision: 39693
2014-02-22 15:51:11 +00:00
Felix Fietkau 7a8f13f33c gianfar: Fix reported number of sent bytes to BQL
This is a backported patch for the gianfar ethernet driver
used in TPLink 4900 v1. It is supposed to fix the error which
show up in dmesg with:
NETDEV WATCHDOG: eth0 (fsl-gianfar): transmit queue xy timed out
Full upstream patch is at: http://patchwork.ozlabs.org/patch/271242

Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>

SVN-Revision: 39692
2014-02-22 14:42:48 +00:00
Jonas Gorski c1f397e1e1 b53: Make b53_switch_init static
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4869/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39683
2014-02-22 11:16:58 +00:00
Jonas Gorski 9eb60826f2 b53: Add BCM53128 switch support
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4867/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39682
2014-02-22 11:16:56 +00:00
Jonas Gorski b8ed6534ca brcm63xx: fix RG100A/DB120 usb port number
Set usbh ports to 2 to fix #15007.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39681
2014-02-22 11:16:52 +00:00
Jonas Gorski 4a2f87bce0 brcm63xx: fix number of usb ports for HW556 variants
Don't only fix up the fallback board, but also all three variants.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39680
2014-02-22 11:16:50 +00:00
Jonas Gorski ece12908a8 brcm63xx: add initial support for BCM963268BU_P300 reference board
Only netboot tested, so no images or now.
GbE ports are only working in FE mode, and leds do not work.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39679
2014-02-22 11:16:48 +00:00
Jonas Gorski f6c4b1eb29 brcm63xx: add VW6339GU support
Completely untested except for booting from network; wan port
only works in 10/HD, lan1 only in 100/FD.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39678
2014-02-22 11:16:46 +00:00
Jonas Gorski 60edb75e47 brcm63xx: fix number of switch ports for BCM63168/63268
BCM63168 has 6 ports (3 FE PHY, 1 GE PHY, two RGMII) and BCM63268
has two additional RGMII ports, making it 8.
Fix this by checking the chip variant and applying an appropriate
limit.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39677
2014-02-22 11:16:44 +00:00
Jonas Gorski edbfb81b56 brcm63xx: F@ST2504n board support (image, base-files)
Signed-off-by: Max Staudt <openwrt.max@enpas.org>
Patchwork: http://patchwork.openwrt.org/patch/4730/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39676
2014-02-22 11:16:42 +00:00
Jonas Gorski 84dc1f1209 brcm63xx: F@ST2504n board support
Signed-off-by: Max Staudt <openwrt.max@enpas.org>
Patchwork: http://patchwork.openwrt.org/patch/4729/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39675
2014-02-22 11:16:40 +00:00
Jonas Gorski ce655b93cd brcm63xx: add support for Asmax AR 1004g router
Support for Asmax AR 1004g router

Signed-off-by: Adrian Feliks <mexit@o2.pl>
Patchwork: http://patchwork.openwrt.org/patch/4464/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39674
2014-02-22 11:16:38 +00:00
Jonas Gorski fa26229e8b brcm63xx: Add profile and build image for Sagemcom F@ST2704V2 ADSL router
This adds profile and build image for Sagemcom F@st2704, using b43
driver.
For WiFi to work properly BCMA fallback SPROM support patch must
be applied (http://git.io/z1Ki8A).

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4212/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39673
2014-02-22 11:16:35 +00:00
Jonas Gorski fe37b14fca brcm63xx: Add userspace support for Sagemcom F@ST2704V2 ADSL router
This adds userspace support for Sagemcom F@st 2704 router.

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4215/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39672
2014-02-22 11:16:33 +00:00
Jonas Gorski f92b2a956b brcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL router
This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
router.
It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
modem equipped with 64 MiB RAM and 8 MiB flash.

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4266/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39671
2014-02-22 11:16:30 +00:00
Luka Perkov 223c6808ba imx6: update Ventana dts
Update the Ventana device-tree to match upstream:
 - Add IMX6Q/IMX6DL variants for GW54xx/GW53xx/GW52xx/GW51xx
 - align pinctrl with upstream
 - consolidate multiple patches into one

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39644
2014-02-20 17:26:10 +00:00
Luka Perkov a52100469f imx6: enable IMX6 watchdog
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39643
2014-02-20 17:26:08 +00:00
Gabor Juhos 4e0309630b ar71xx: rb91x: fix pll_1000 value for eth0 to avoid packet loss
When the RB91x device uses a GbE link the connection
suffers from packet loss:

  root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 20 -q
  PING 192.168.1.254 (192.168.1.254): 65507 data bytes

  --- 192.168.1.254 ping statistics ---
  20 packets transmitted, 9 packets received, 55% packet loss
  round-trip min/avg/max = 4.570/4.815/4.999 ms

Using a different PLL value fixes the issue.

  root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 100 -q
  PING 192.168.1.254 (192.168.1.254): 65507 data bytes

  --- 192.168.1.254 ping statistics ---
  100 packets transmitted, 100 packets received, 0% packet loss
  round-trip min/avg/max = 4.449/5.413/13.870 ms

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39642
2014-02-20 17:07:56 +00:00
Gabor Juhos d19b868b12 ar71xx: Add support for MikroTik RB951Ui-2HnD
I noticed that the patch at http://patchwork.openwrt.org/patch/4017/
for adding support for the MikroTik RouterBOARD 951Ui-2HnD had been
abandoned because it wasn't generated and sent to the mailing list
correctly and doesn't apply as a result.  I have cleaned up this patch.

When testing this on real hardware, I also noticed that wireless didn't
work, so this patch fixes that as well.

This patch applies cleanly to SVN 39392.

Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>
Patchwork: http://patchwork.openwrt.org/patch/4773/
[juhosg:
  - drop the 'rb951ui_wlan_init' function and rework the code to
    use the recently introduced rb95x_wlan_init function instead,
  - fix GPIO number of the port5 LED,
  - rename LEDs according to the standard LED naming conventions,
    and use 'rb' prefix in the names]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39641
2014-02-20 17:07:51 +00:00
Gabor Juhos ab6e3af7fc kernel/3.10: improve fq_codel hashing for 6in4 6to4 801.ad and IPIP cases
This is a backport of code to improve the quality of fq_codel
hashing for 3.10 for some encapsulated protocols.

Not needed in 3.11 and later.

Patch-by: Dave Taht <dave.taht@bufferbloat.net>
Patchwork: http://patchwork.openwrt.org/patch/4902/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39640
2014-02-20 17:07:44 +00:00
Luka Perkov fcbfe67e2a imx6: drop upstream rejected patch
http://article.gmane.org/gmane.linux.drivers.i2c/17891

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39639
2014-02-20 14:01:28 +00:00
Gabor Juhos f433088d50 ar71xx: add profile and build image for TP-Link TL-WDR4900 v2.0 board
Patch-by: TenNinjas <tenninjas@tenninjas.ca>
Patchwork: http://patchwork.openwrt.org/patch/4850/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39637
2014-02-19 12:15:35 +00:00
Gabor Juhos 7ec2d80ae3 ar71xx: add user-space support for TP-Link TL-WDR4900 v2.0 board
Patch-by: TenNinjas <tenninjas@tenninjas.ca>
Patchwork: http://patchwork.openwrt.org/patch/4849/
[juhosg:
  - use the Archer C7 specific LED setup instead of adding
    identical code]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39636
2014-02-19 12:15:34 +00:00
Gabor Juhos db0e6e264d ar71xx: add kernel support for the TP-Link TL-WDR4900 v2.0 board
Patch-by: TenNinjas <tenninjas@tenninjas.ca>
Patchwork: http://patchwork.openwrt.org/patch/4848/
[juhosg:
  - rename and refresh kernel patch,
  - merge the board setup code into mach-archer-c7.c and drop
    mach-tl-wdr49000-v2.c]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39635
2014-02-19 12:15:32 +00:00
Nicolas Thill cd164501b9 sunxi: move a lost CONFIG_CHARGER symbol to generic
SVN-Revision: 39634
2014-02-19 00:17:19 +00:00
Nicolas Thill bb7cbef63c target/sunxi: make REGMAP built-in (used by REGULATOR)
SVN-Revision: 39633
2014-02-18 22:29:56 +00:00
Nicolas Thill 8a04ab5871 target/uml: update README
invoking uml is now simplier, not need to setup console & serial

SVN-Revision: 39632
2014-02-18 22:16:04 +00:00
Gabor Juhos 2288dd072b kernel: refresh configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39627
2014-02-18 17:34:18 +00:00
Gabor Juhos 6b8eb55ddb ar71xx: fix unaligned access hacks for tcp timestamps
This missing bit of the hack saves hugely on instruction traps
on tcp connections to ar71xx based routers.

Patch-by: Dave Taht <dave.taht@bufferbloat.net>
Patchwork: http://patchwork.openwrt.org/patch/4905/
[juhosg: adjust subject, refresh kernel patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39626
2014-02-18 17:34:17 +00:00
Gabor Juhos d6cb5215a9 ar71xx: WNR2200: fix mounting root fs problem
Solves ticket #14356 <https://dev.openwrt.org/ticket/14356>

Without this patch, UART output will show only 4 partitions:
  [    0.740000] 4 cmdlinepart partitions found on MTD device spi0.0
  [    0.750000] Creating 4 MTD partitions on "spi0.0":
  [    0.750000] 0x000000000000-0x000000050000 : "u-boot"
  [    0.760000] 0x000000050000-0x000000070000 : "u-boot-env"
  [    0.770000] 0x000000070000-0x0000007f0000 : "firmware"
  [    0.790000] 0x0000007f0000-0x000000800000 : "art"
and then linux complains :VFS: Cannot open root device "(null)"

With this patch, UART out will show 7 partitions:
  [    0.740000] 4 cmdlinepart partitions found on MTD device spi0.0
  [    0.750000] Creating 4 MTD partitions on "spi0.0":
  [    0.750000] 0x000000000000-0x000000040000 : "u-boot"
  [    0.760000] 0x000000040000-0x000000050000 : "u-boot-env"
  [    0.770000] 0x000000050000-0x0000007f0000 : "firmware"
  [    0.780000] 2 netgear-fw partitions found on MTD device firmware
  [    0.780000] 0x000000050000-0x00000014b440 : "kernel"
  [    0.790000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  [    0.800000] 0x00000014b440-0x0000007f0000 : "rootfs"
  [    0.810000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  [    0.820000] mtd: device 4 (rootfs) set to be root filesystem
  [    0.830000] 1 squashfs-split partitions found on MTD device rootfs
  [    0.830000] 0x000000340000-0x0000007f0000 : "rootfs_data"
  [    0.840000] 0x0000007f0000-0x000000800000 : "art"

This patch is tested against r39502 of trunk.

Signed-off-by: Jonathan Chang <changcs@santos.ee.ntu.edu.tw>
Patchwork: http://patchwork.openwrt.org/patch/4870/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39625
2014-02-18 17:34:16 +00:00
John Crispin b56bef28d7 ralink: add support for na930
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39611
2014-02-18 13:33:25 +00:00
John Crispin 55383946dc ralink: add gpio_uartf mux group
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39610
2014-02-18 13:33:20 +00:00
John Crispin 363512b8c6 ralink: fix the gpio mode mapping
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39609
2014-02-18 13:33:16 +00:00
Zoltan Herpai f57f19ed81 3.13: revert r39601 as the symbol is already there
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39602
2014-02-17 11:49:34 +00:00
Zoltan Herpai a3dfcac7ba 3.13: add missing NF_TABLES symbol - until someone packages it
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39601
2014-02-17 10:57:11 +00:00
Zoltan Herpai e82a230930 3.13: add missing symbol
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39600
2014-02-17 10:20:53 +00:00
Luka Perkov 30c39f99a7 kirkwood: dockstar: remove sata from packages
The dockstar doesn't have any sata ports.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 39596
2014-02-16 00:14:29 +00:00
Luka Perkov 9ba7cbafe4 kirkwood: add support for Seagate GoFlexNet
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 39595
2014-02-16 00:14:27 +00:00
Luka Perkov 58fa3f8fdf kirkwood: update support for dockstar
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:

nand erase 0x200000 0xfe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-dockstar-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset

Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by: Alexander Couzens <lynxis@fe80.eu>
CC: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39593
2014-02-15 23:53:10 +00:00
Luka Perkov 0b0357b50e kirkwood: update support for ib62x0
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:

nand erase 0x200000 0xfe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-ib62x0-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset

Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by: Luka Perkov <luka@openwrt.org>
CC: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39592
2014-02-15 23:53:09 +00:00
Luka Perkov 0c25f159fd kirkwood: update support for iconnect
Previous patch was pushed due to false user report. While at it fix alphabetic
ordering.

The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:

nand erase 0x200000 0x1fe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-iconnect-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset

Signed-off-by: Luka Perkov <luka@openwrt.org>
CC: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39591
2014-02-15 23:53:08 +00:00
Luka Perkov cde033f918 kernel: rtl8306: update reset function
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 39589
2014-02-15 22:54:35 +00:00
Luka Perkov 6e0fd6d518 lantiq: fix typo in pinctl driver
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 39588
2014-02-15 22:54:34 +00:00
Luka Perkov eddc327c7c lantiq: fix PCI problems on ARV4510PW
Some ARV4510PW units seem to have unstable PCI due to missing pull-up
resistors. This patch makes sure that the GPIO lines are driven properly.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 39587
2014-02-15 22:54:32 +00:00
Imre Kaloz 183e6a2bbc use the default package set
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39584
2014-02-14 10:09:07 +00:00
Jo-Philipp Wich b1d7ebae09 ar71xx: fix mtdpartsize macro in image Makefile (#14961)
The mtdpartsize macro triggers shell errors on various Linux distributions
when the partname argument $(1) does not appear within the partmap $(2).

Change the sed pattern to only emit anything if a successful substitution
occured and only evaluate the arithmetic expression if something was printed
by the sed program.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 39583
2014-02-13 21:19:00 +00:00
Imre Kaloz af63cdf87a upgrade 3.13 targets to 3.13.2, refresh patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org

SVN-Revision: 39582
2014-02-13 13:27:14 +00:00
Imre Kaloz 83d9cec491 upgrade 3.12 to 3.12.10
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39581
2014-02-13 12:57:36 +00:00
Imre Kaloz 4c1dabb81e change image generation logic
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39580
2014-02-13 10:43:32 +00:00
Imre Kaloz 16b039f367 handle some CONFIG_TARGET_ROOTFS_INCLUDE_ foo
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39578
2014-02-12 15:38:08 +00:00
Imre Kaloz 836174c22f copy initramfs zImage to the bin dir as well
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39577
2014-02-12 10:51:46 +00:00
Imre Kaloz 936166c042 generate ubifs images
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39576
2014-02-12 10:48:33 +00:00
Luka Perkov ef5c3bbb5f imx6: drop 3.12 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39574
2014-02-12 00:46:02 +00:00
Luka Perkov 3203599a7d imx6: add initial 3.13 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39573
2014-02-12 00:46:00 +00:00
Luka Perkov 4fd88fa081 mvebu: enable NAND controller support
Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>

SVN-Revision: 39569
2014-02-11 02:16:04 +00:00
Luka Perkov 26e8e630ef mvebu: add support for the Armada XP GP board (DB-MV784MP-GP)
This Armada XP GP board from Marvell comes with:

* 2GB DDR3 DIMM
* 1GB NAND flash (8-bit interface)
* 16MB NOR flash (16-bot interrface)
* 16MB SPI flash
* SDIO module
* 3 PCIe
* 1 SATA link
* 2 USB EHCI
* 1 internal SSD
* 4 Ethernet Gigabit
* 1 RS232 port over USB

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>

SVN-Revision: 39568
2014-02-11 02:07:47 +00:00
Luka Perkov 353b4a98db mvebu: update kernel config
The config-3.10 doesn't specify the configuration of the backported PCI
features, and the Marvell EBU Device Bus Controller, this will prevent
a clean compile. This patch enables these features to archive a clean compile
without having to specify the state of these configuration after starting to
compile.

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>

SVN-Revision: 39567
2014-02-11 02:07:46 +00:00
Luka Perkov c9ae111a20 mvebu: backport mainline patches from kernel 3.13
This is a backport of the patches accepted to the Linux mainline related to
mvebu SoC (Armada XP and Armada 370) between Linux v3.12, and Linux v3.13.
This work mainly covers:

* Finishes work for sharing the pxa nand driver(drivers/mtd/nand/pxa3xx_nand.c)
  between the PXA family, and the Armada family.
* timer initialization update, and access function for the Armada family.
* Generic IRQ handling backporting.
* Some bug fixes.

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
CC: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39566
2014-02-11 02:07:44 +00:00
Luka Perkov 3af779eb17 mvebu: backport mainline patches from kernel 3.12
This is a backport of the patches accepted to the Linux mainline related to
mvebu SoC (Armada XP and Armada 370) between Linux v3.11, and Linux v3.12.
This work mainly covers:

* Ground work for sharing the pxa nand driver(drivers/mtd/nand/pxa3xx_nand.c)
  between the PXA family,and the Armada family.
* Further updates to the mvebu MBus.
* Work and ground work for enabling MSI on the Armada family.
* some phy / mdio bus initialization related work.
* Device tree binding documentation update.

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
CC: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39565
2014-02-11 02:07:41 +00:00
Luka Perkov 69d323f231 mvebu: backport mainline patches from kernel 3.11
This is a backport of the patches accepted to the Linux mainline related to
mvebu SoC (Armada XP and Armada 370) between Linux v3.10, and Linux v3.11.
This work mainly covers:

* Enabling USB storage, and PCI to mvebu_defconfig.
* Add support for NOR flash.
* Some PCI device tree related updates, and bus parsing.
* Adding Armada XP & 370 PCI driver, and update some clock gating
  specifics.
* Introduce Marvell EBU Device Bus driver.
* Enaling USB in the armada*.dts.
* Enabling, and updating the mvebu-mbus.
* Some SATA and Ethernet related fixes.

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>
CC: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39564
2014-02-11 02:07:38 +00:00
Hauke Mehrtens f73d6f102a kernel: fix kmod-usb-net-smsc95xx
smsc95xx.ko depends on crc16.ko on kernel >= 3.8
There was an additional kmod-usb-net-smsc95xx definition in the mxs
target code which conflicted with the one in the common area.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39562
2014-02-10 20:12:13 +00:00
Imre Kaloz 40ad83f70d keep initramfs the default for us
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39561
2014-02-10 15:30:01 +00:00
Imre Kaloz 116d7fc9c2 don't build in usb stuff
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39557
2014-02-10 14:35:20 +00:00
Imre Kaloz 6daafb74b9 additional musb fixups
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39554
2014-02-09 16:14:30 +00:00
Imre Kaloz 98e4ca00ed move some omap24xx modules to the generic Makefile
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39543
2014-02-09 13:01:00 +00:00
Hauke Mehrtens f4b6bd8d0b kernel: XHCI PCI quirks for kernel 3.12 and 3.13
This adds empty definitions for the PCI quirks functions when they
should not be included in the kernel.
This is based on a patch by Daniel <daniel@makrotopia.org>

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39534
2014-02-08 16:32:37 +00:00
Hauke Mehrtens 7790ac5ecc kernel: fix bridge compilation on kernel 3.13
The int brnf_call_ebtables in the header should be extern, otherwise
every object file gets its own int and they will conflict when linking
the binary.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39533
2014-02-08 15:36:03 +00:00
Hauke Mehrtens caf2bd456c kernel: add missing config symbol for 3.13.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39531
2014-02-08 15:31:57 +00:00
Jonas Gorski 6cf402a41d mvebu: remove forced module config
These should either be disabled or not present in the config, else
they might cause build issues because of unexpected unpackaged
modules, as it is the case for LEDS_CLASS.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 39529
2014-02-08 11:47:33 +00:00
Zoltan Herpai ee3abfe853 and add some more symbols
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39526
2014-02-07 16:55:32 +00:00
Imre Kaloz 4fe4daccdc upgrade to 3.13.1
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39525
2014-02-07 16:51:01 +00:00
Imre Kaloz 29c6927f14 add more symbols
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39524
2014-02-07 16:50:26 +00:00
Zoltan Herpai add22b1a07 mxs: bump target to 3.13.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39512
2014-02-06 21:03:27 +00:00
Zoltan Herpai 2fd373f046 sunxi: bump target to 3.13.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39511
2014-02-06 21:02:38 +00:00
Zoltan Herpai 62cba268a2 sunxi: various 3.13 usb changes - disable USB_DEBUG - rename reset compat property
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39510
2014-02-06 21:01:52 +00:00
Imre Kaloz 96007fee20 switch to 3.13.1
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39509
2014-02-06 18:32:53 +00:00
Imre Kaloz ed2b3e7771 add 3.13 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39508
2014-02-06 18:32:03 +00:00
Zoltan Herpai a7f0eb013a sunxi: sun6i-a31 changes - push remaining sun6i patches for 3.13 - enable Colombus A31 devboard (compile-tested only)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39487
2014-02-05 21:11:59 +00:00
Hauke Mehrtens 208b7a70a6 atheros: change LINUX_VERSON from 3.8.13 to 3.10.28
The 3.10.x infrastructure has been present for some time, and seems to
run fine here.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 39483
2014-02-05 20:03:48 +00:00
Zoltan Herpai e656140642 mxs: initial 3.13 support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39476
2014-02-05 13:05:39 +00:00
Zoltan Herpai 0c9ad86a13 mxs: update duckbill DTS to fix include
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39475
2014-02-05 13:03:21 +00:00
Zoltan Herpai 3e5042bec2 sunxi: fix USB voltage on pcDuino
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39472
2014-02-05 08:43:49 +00:00
Zoltan Herpai c957af0a0f sunxi: initial 3.13 support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39471
2014-02-05 08:42:28 +00:00
Hauke Mehrtens 2ad7e55a89 brcm47xx: new patch adding arch workarounds.c
It was recently sent to linux-mips for comments. It adds workaround for
WNR3500L to enable USB port.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 39469
2014-02-04 23:32:01 +00:00
Hauke Mehrtens 14113eb88f brcm47xx: use upstream patch removing WGT634U code
It does the same, it just reorders things

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 39468
2014-02-04 23:30:38 +00:00
Hauke Mehrtens db73f1433b brcm47xx: move OpenWrt arch patches a bit further
This allows picking more upstreamed stuff

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 39467
2014-02-04 23:25:17 +00:00
Hauke Mehrtens b75a9b04df bcm53xx: update the bcm53xx patches
This does not add any new features, just some changes to the patches
and a first try to use dt to set the irqs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39466
2014-02-04 23:00:55 +00:00
Hauke Mehrtens f491623c37 kernel: bgmac: update bgmac to a version from kernel 3.14-rc1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39465
2014-02-04 22:55:23 +00:00
Hauke Mehrtens 7ae5ff92ae kernel: ssb: update ssb to a version from kernel 3.14-rc1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39464
2014-02-04 22:54:29 +00:00
Hauke Mehrtens e0d4a548fb kernel: bcma: update bcma to a version from kernel 3.14-rc1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39463
2014-02-04 22:53:52 +00:00
Felix Fietkau 4425082339 kernel: add missing changes to 220-gc_sections.patch that were accidentally dropped during porting to 3.13
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 39458
2014-02-04 07:35:21 +00:00
Zoltan Herpai 3fdf04002c add missing symbol
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39439
2014-01-31 16:04:19 +00:00
Zoltan Herpai 16cbe62e9c sunxi: boot changes - Added uEnv.txt to facilitate automatic boot. - Cosmetic fix in u-boot Makefile - Don't force command line arguments
Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39438
2014-01-31 15:53:53 +00:00
Gabor Juhos 037b42838f ar71xx: dragino2: add missing sysupgrade support.
The original dragino2 board support was missing some changes from the
upstream svn repository (http://svn.dragino.com/dragino2) that supported
sysupgrade.

[juhosg: change subject]

Signed-off-by: Karl Palsson <karlp@remake.is>
Patchwork: http://patchwork.openwrt.org/patch/4801/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39429
2014-01-30 17:08:02 +00:00
Gabor Juhos a558bb4471 kernel/3.1x: yaffs: fix handling of small-page NAND devices
Since the yaffs code update (r39084), it is not
possible to install OpenWrt on RouterBoards with
small-page NAND chips. Fix the yaffs code to make
it work again.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39409
2014-01-28 17:30:25 +00:00
Zoltan Herpai 6ebfa8c33c add missing symbol
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39406
2014-01-27 19:30:01 +00:00
Zoltan Herpai f617d92b28 mxs: make config and patches versioned
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39405
2014-01-27 19:29:04 +00:00
Florian Fainelli 87f8092629 brcm63xx: fix warning in Redboot code
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39404
2014-01-27 04:34:39 +00:00
Gabor Juhos a709f0fd9a x86: remove 3.6 support
The 3.6 kernel isn't used by any of the x86 subtargets, so remove it.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39403
2014-01-26 17:42:26 +00:00
Gabor Juhos 7c137c187f ar71xx: swconfig: use the local helper to set LED brightness on link down
Use the 'swconfig_trig_set_brightness' function to set
the brightness value of the LED when the link goes down.
This ensures that the last brighness value is saved into
a local variable which is used to track the actual LED
status.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39402
2014-01-26 16:46:21 +00:00
Gabor Juhos 3b8c51771d ar71xx: wpe72: set active_low flag for the reset button
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39401
2014-01-26 14:55:34 +00:00
Gabor Juhos b503dc026e ar71xx: wp543: set active_low flag for the buttons
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39400
2014-01-26 14:55:32 +00:00
Gabor Juhos a2543d72d8 kernel: update 3.10 to 3.10.28
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39399
2014-01-26 11:30:34 +00:00
Gabor Juhos e41e531e3b ar71xx: image: reserve 4 erase blocks on the TP-Link devices
This ensures that the generated images will have enough erase
blocks for JFFS2.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39397
2014-01-25 18:12:13 +00:00
Gabor Juhos 50f38063cd ar71xx: archer c7: define LEDs connected to the AR8327 switch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39395
2014-01-25 11:16:59 +00:00
Gabor Juhos f1a9ed8345 ar71xx: image: move WNDAP360 macro
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39394
2014-01-25 08:31:45 +00:00
Gabor Juhos 715c7533b9 kernel/3.8: update pci_disable_usb_common_quirks patch
Fix build errors caused by undefined 'usb_disable_xhci_ports'
symbol.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39393
2014-01-25 08:25:05 +00:00
Gabor Juhos f85231257e ar71xx: fix bad RX sensitivity on newer TL-WDR4300 boards
On recent TL-WDR4300 boards the external LNAs of the 2.4GHz
interface are connected to GPIO lines. Because these GPIO
lines are disabled by default, the RX sensitivity of the
device is quite bad.

Setup the GPIOs of the external LNAs to fix the issue.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39392
2014-01-24 17:40:17 +00:00
Gabor Juhos 09bf46d418 ar71xx: image: generate sysupgrade images for the Compex boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39391
2014-01-24 17:15:03 +00:00
Gabor Juhos 252e906dda ar71xx: add sysupgrade support for the Compex boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39390
2014-01-24 17:15:02 +00:00