Commit Graph

649 Commits (fe6e2f8e1b1f48e0fa2d11127ecab95e6e33f630)

Author SHA1 Message Date
Felix Fietkau ad97acf46a brcm47xx: merge FEATURES lines in the legacy subtarget
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41053
2014-06-08 09:51:38 +00:00
Felix Fietkau c48140efb8 brcm47xx: fix kmod-usb-brcm47xx build on legacy and mips74k subtargets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41052
2014-06-08 09:45:55 +00:00
Hauke Mehrtens ed7c73fbef brcm47xx: activate some compiler optimizations for 74K CPUs
With this patch the mips74k subtarget will be compiled with optimized
compiler options to generated smaller and faster code. This currently
breaks broadcom-wl, because the binary blob is only compiled with
mipsr1 support.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41050
2014-06-07 17:36:02 +00:00
Felix Fietkau 4b953aa267 brcm47xx: move the low_mem feature flag to the legacy subtarget
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41049
2014-06-07 17:21:30 +00:00
Hauke Mehrtens 717e8b6f3c brcm47xx: remove old gpio and nvram interfaces
These were only used by broadcom-diag any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41048
2014-06-07 17:04:37 +00:00
Hauke Mehrtens cfa350ca39 brcm47xx: mips74k: optimize kernel config
This saves abount 15 kB of compressed kernel size.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41043
2014-06-07 15:42:33 +00:00
Hauke Mehrtens 9dc5fb9103 bcm47xx: use eth0 for switch name
This fixes some strange problems with tg3. I assume that the Ethernet
driver was not brought up if the switch was named switch0.

This was reported and tested by ernesto (Faulp3lz).

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41042
2014-06-07 15:41:41 +00:00
Felix Fietkau dec0d7f025 brcm47xx: add a "legacy" subtarget that is usable for low-end 802.11g devices like WRT54G
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41041
2014-06-07 15:19:40 +00:00
Hauke Mehrtens bffd80e3e1 brcm47xx: add mips74k subtarget for newer devices
All new devices (with MIPS 74K CPU) are based on BCMA SoC and have
Ethernet core supported by bgmac. Create a new subtarget to generate
optimized builds.
This is just a beginning, further tweaks (like kernel configuration)
are still possible. This decreases default root.squashfs by ~128 kB.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41025
2014-06-05 21:25:03 +00:00
Hauke Mehrtens b5d42bc111 brcm47xx: move current target to "generic" subtarget
This allows creating more subtargets and optimize builds per family.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41024
2014-06-05 21:23:58 +00:00
Felix Fietkau ae2c9a815a brcm47xx: enable the low-memory feature flag
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40982
2014-06-02 17:04:45 +00:00
John Crispin f933a741a9 target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGC
ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct
var $# (=number of args) here. under normal conditions this had no impact,
but we should at least correct it. the error was observable like this:

root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh
root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh
root@box:~ . /lib/upgrade/platform.sh
root@box:~ . /lib/upgrade/common.sh
root@box:~ platform_check_image /tmp/myfirmware.bin
ash: bad number
root@box:~ echo $?
0

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 40915
2014-06-02 12:43:22 +00:00
Felix Fietkau 32d1e0ed2c kernel: add a ssb backport required for a new mac80211 update
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40833
2014-05-23 18:48:31 +00:00
Hauke Mehrtens 16b6db7055 brcm47xx: profiles: fix white spaces (s/ $//)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 40763
2014-05-14 10:09:31 +00:00
Hauke Mehrtens 1d878cabf2 brcm47xx: image: respect device flash block size
We should be more careful and don't generate 128K JFFS2 images for
devices with flashes using 64K blocks (nor the other way).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 40762
2014-05-14 10:08:56 +00:00
Hauke Mehrtens 4cd010a712 brcm47xx: image: document some defines arguments
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 40761
2014-05-14 10:08:22 +00:00
Gabor Juhos d2812cb036 kernel: update 3.10 to 3.10.36
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40467
2014-04-12 11:59:07 +00:00
Hauke Mehrtens e99cfaaf95 brcm47xx: refresh patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40425
2014-04-08 19:51:36 +00:00
Hauke Mehrtens c286feac80 brcm47xx: backport 3.14 patch for nvram GPIO pin read
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40346
2014-03-30 19:07:46 +00:00
Hauke Mehrtens 499d1f1401 brcm47xx: Name LEDs colors for Linksys E1000 V2.1
Handle it by creating a new patch for simple database changes.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40345
2014-03-30 19:07:13 +00:00
Hauke Mehrtens a1f4a43cef brcm47xx: update workarounds patch to V3
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40344
2014-03-30 19:06:24 +00:00
Gabor Juhos 627baa28d3 kernel: update 3.10 to 3.10.34
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
2014-03-27 09:28:33 +00:00
Hauke Mehrtens 00dc53dd2e brcm47xx: add initial support for kernel 3.14
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39905
2014-03-12 23:28:41 +00:00
Florian Fainelli f71fa7d646 brcm47xx: explicitely mention MIPS to avoid confusion
And while at it, fix the nomenclature, BCM947xx/953xx refer to specific boards,
while BCM47xx/BCM53xx refer to chip identification number.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39841
2014-03-08 01:48:44 +00:00
Hauke Mehrtens 5b388e5716 brcm47xx: b44: some fixes in combination with the switch
Let the switch start the carrier and set the duplex mode independently
if this nic is up of not.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39733
2014-02-23 18:51:56 +00:00
Hauke Mehrtens f587bacc26 brcm47xx: b44: start the phy
We did not start the PHY when an external phy was in use. Without this
patch the driver uses half duplex mode and the switch uses full duplex
mode, which causes problems.
Thank you fback for spotting this problem.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39719
2014-02-23 16:58:12 +00:00
Hauke Mehrtens 15a7efa119 brcm47xx: fix detection of some Linksys WRT54G* devices
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39718
2014-02-23 15:57:37 +00:00
Gabor Juhos f677b1bc7e kernel: update 3.10 to 3.10.32
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
2014-02-23 10:59:40 +00:00
Hauke Mehrtens 2ad7e55a89 brcm47xx: new patch adding arch workarounds.c
It was recently sent to linux-mips for comments. It adds workaround for
WNR3500L to enable USB port.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 39469
2014-02-04 23:32:01 +00:00
Hauke Mehrtens 14113eb88f brcm47xx: use upstream patch removing WGT634U code
It does the same, it just reorders things

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 39468
2014-02-04 23:30:38 +00:00
Hauke Mehrtens db73f1433b brcm47xx: move OpenWrt arch patches a bit further
This allows picking more upstreamed stuff

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 39467
2014-02-04 23:25:17 +00:00
Hauke Mehrtens 7ae5ff92ae kernel: ssb: update ssb to a version from kernel 3.14-rc1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39464
2014-02-04 22:54:29 +00:00
Hauke Mehrtens e0d4a548fb kernel: bcma: update bcma to a version from kernel 3.14-rc1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39463
2014-02-04 22:53:52 +00:00
Gabor Juhos a2543d72d8 kernel: update 3.10 to 3.10.28
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39399
2014-01-26 11:30:34 +00:00
Hauke Mehrtens 6df49552fc brcm47xx: add brcmsmac + bgmac profile
Signed-off-by: Cody P Schafer <devel@codyps.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39258
2014-01-12 19:04:54 +00:00
Hauke Mehrtens f912b47931 brcm47xx: parse model from cpuinfo
Instead of looking into the proc entry provided by broadcom-diag use
the board info from /proc/cpuinfo to get the board we are on.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39256
2014-01-12 18:56:57 +00:00
Hauke Mehrtens bcdea80b0b brcm47xx: fix led indication
Use the new led api also on brcm47xx.
The led for failsafe indication is searched for.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39255
2014-01-12 18:56:36 +00:00
Hauke Mehrtens edab966e45 brcm47xx: fix network failsafe indication
Remove the code used on the old switch driver.
The Ethernet drive is loaded as a module and needs some time to get up
therefor we added some wait function.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39254
2014-01-12 18:56:15 +00:00
Hauke Mehrtens f4f31511fd brcm47xx: do not use broadcom-diag
This makes brcm47xx target use the default gpio led and button driver
and not broadcom-diag any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39253
2014-01-12 18:55:52 +00:00
Hauke Mehrtens c2992ee273 brcm47xx: add new led and button support
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39252
2014-01-12 18:55:25 +00:00
Hauke Mehrtens 30cf6f5815 brcm47xx: update some patches to versions in linux mainline
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39251
2014-01-12 18:54:38 +00:00
Hauke Mehrtens 7d654de038 brcm74xx: fix patch for BCM4706 CPUs
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39250
2014-01-12 18:51:45 +00:00
Hauke Mehrtens e585841044 brcm47xx: update mtd drivers
This backports some patches from linux upstream.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39249
2014-01-12 18:50:45 +00:00
Gabor Juhos 0e2586a774 kernel: update 3.10 to 3.10.26
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39220
2014-01-11 16:06:37 +00:00
Hauke Mehrtens 8c085f647b brcm47xx: fix cpu wait for BCM4706
This was called to early.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39167
2013-12-26 23:30:10 +00:00
Hauke Mehrtens 961d5b4453 brcm47xx: b44: This updates the phylib patches to the version send upstream
This uses a fixed phy instead of a dummy one.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39166
2013-12-26 23:27:52 +00:00
Hauke Mehrtens 36197755dc brcm47xx: deactivate early printk support
This breaks some devices where the serial console is not at port 0 but
somewhere else.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39060
2013-12-15 19:19:16 +00:00
Hauke Mehrtens 952db22551 kernel: update kernel 3.10 to 3.10.24
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39059
2013-12-15 19:16:30 +00:00
Hauke Mehrtens 94f7ae90f8 brcm47xx: misc cleanups
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38980
2013-12-01 18:12:57 +00:00
Hauke Mehrtens c48f285147 brcm47xx: deactivate mips wait instruction only for BCM4706
The wait instruction is only broken on the BCM4706 and not on the other
similar SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38979
2013-12-01 18:05:08 +00:00