eba9b8a324
kernel: unbreal of_i2c selection
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37201
2013-07-08 09:01:52 +00:00
fc40051569
lantiq: move dsl tools to package/network/config
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37198
2013-07-08 09:01:38 +00:00
8fdf418c96
ltq-hcd: remove prebuilt module
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37190
2013-07-08 00:37:50 +00:00
a1734998ee
kernel: fix 8250 ko name for 3.9
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37164
2013-07-04 13:31:28 +00:00
cb179cb262
mac80211: make rt2x00_soc depend on !rt3883
...
https://dev.openwrt.org/ticket/13777
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37162
2013-07-04 13:31:18 +00:00
e15a16bfd7
button-hotplug: Add KEY_POWER handling
...
When running OpenWrt within KVM KEY_POWER is generated from the ACPI
button driver when restarting or powering down the VM.
Extend button-hotplug to allow user space handlers for these events.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/3799/
SVN-Revision: 37160
2013-07-04 13:31:09 +00:00
6988613f7a
gpio-button-hotplug: add support for EV_SW
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37130
2013-07-02 10:45:31 +00:00
16079fbd9a
rt2x00: fix rf id override for RT5350
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37109
2013-06-30 17:54:20 +00:00
2d8990256c
mac80211: use a new tarball with updated backport code
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37105
2013-06-30 14:49:14 +00:00
12c033dfd9
mac80211: update to wireless-testing 2013-06-27, fix ATH_USER_REGD handling
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37097
2013-06-30 10:44:19 +00:00
0f6e9c9fcc
gpio-button-hotplug: improve gpio button debouncing, verify state changes over multiple polls. fixes spurious failsafe triggers ( #13784 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37090
2013-06-29 19:01:49 +00:00
ae6fc0e4bd
ath9k: fix tx queue pending frame counter when dropping packets
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37081
2013-06-29 12:38:15 +00:00
78ac19be04
mac80211: fix cck rate sampling in minstrel_ht
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37078
2013-06-28 19:14:54 +00:00
1761b7b370
mac80211: disable rt2x00 on mt7620a
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37037
2013-06-27 07:25:13 +00:00
0f003be010
ath9k: fix a minor rcu issue
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37013
2013-06-22 13:59:55 +00:00
fdb8d23745
mac80211: fix compile error on rt2x00 when buildin for SoC
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37008
2013-06-21 16:54:46 +00:00
4ebf19b48f
packages: clean up the package folder
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37007
2013-06-21 16:54:37 +00:00
4e0c649783
kernel: add dependencies for kernel 3.10
...
SVN-Revision: 36925
2013-06-12 13:59:34 +00:00
dff1529d2a
modules: make all led and button modules used during boot priority 1
...
This makes sure the modules are symlinked in /etc/modules-boot.d/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36892
2013-06-10 08:24:25 +00:00
eed8141976
kmod-usb-net-cdc-mbim: fix module loading
...
cdc_mbim should be loaded after cdc_ncm (closes : #13562 )
SVN-Revision: 36856
2013-06-05 14:34:50 +00:00
8170c9cfb0
add some more symbols
...
SVN-Revision: 36834
2013-06-04 11:23:27 +00:00
87203c4049
kernel: adapt module paths for 3.10-rc1
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36662
2013-05-19 18:36:09 +00:00
dc00dbd085
kernel: modules: kmod-fs-isofs depends on kmod-lib-zlib
...
Add missing dependency. Fixes #11624 .
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36593
2013-05-09 20:50:10 +00:00
826b4e36c4
kernel: add veth module
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36540
2013-05-03 15:16:50 +00:00
7f2743d458
kernel: netfilter.mk: Explicitly set the order of autoloaded modules
...
In my machine, the file is created with arptable_filter before
arp_tables. This can't happen because the former depends on the
latter.
So, instead of rely on wildcards (*.ko), set by hand the files to
be loaded in the correct order.
Signed-off-by: Jonh Wendell <jonh.wendell@oiwifi.com.br>
SVN-Revision: 36512
2013-05-02 11:25:18 +00:00
af30e5e6bb
Enable hidraw support.
...
It's needed for dealing with certain UART-to-USB adapters built into
e.g. weather stations, and increases the hid module package only
slightly (e.g. on ar71xx: 35k -> 37k).
Signed-off-by: Danny Baumann <dannybaumann@web.de>
SVN-Revision: 36415
2013-04-24 09:49:09 +00:00
2cea3d3949
Add kernel module package for hid-generic driver.
...
Needed to support e.g. keyboards and mice.
Signed-off-by: Danny Baumann <dannybaumann@web.de>
SVN-Revision: 36414
2013-04-24 09:49:03 +00:00
49799d344d
kernel: add kmod-mcp23s08 package
...
Package up the Microchip MCP23S08 I/O expander driver. Needed on the
CalAmp LMU5000 board.
Signed-off-by: Adam Porter <porter.adam@gmail.com>
[jogo@openwrt.org: fix subject]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36393
2013-04-23 09:21:55 +00:00
38b4865a68
package/kernel: only include i2c-of if CONFIG_OF enabled
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36227
2013-04-06 16:55:25 +00:00
bf57f33f02
kernel: Allow talitos crypto hw module selection
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36224
2013-04-06 12:41:06 +00:00
1c8d2aec18
unbreak i2c-mv64xxx dependencies
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36192
2013-04-03 12:58:06 +00:00
8baf097b84
fix borken of-i2c dependencies
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36191
2013-04-03 12:51:12 +00:00
30ee3ef24e
add cdc-mbim module
...
http://patchwork.openwrt.org/patch/3370/
Signed-off-by: Rusink Rusinkoff <rzrusink@gmail.com>
SVN-Revision: 36184
2013-04-03 10:00:55 +00:00
219313833a
Add INA2XX current sensor module.
...
This is a I2C current/voltage/power sensor.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36182
2013-04-03 10:00:44 +00:00
7852c48ffd
add lm92 kernel module
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36181
2013-04-03 10:00:40 +00:00
62b5098b35
add pcf857x kernel module
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36180
2013-04-03 10:00:36 +00:00
c9254f5b5d
make OF_I2C build as part of i2c-core
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36179
2013-04-03 10:00:32 +00:00
c9544f4af0
kernel: add some fixes for kernel 3.9
...
This patch fixes some compile problems with kernel 3.9 and adds some missing linux 3.9 handling into kernel packages.
SVN-Revision: 36098
2013-03-20 21:59:24 +00:00
b48e5f2111
kernel: enable SND_COMPRESS_OFFLOAD for kernels >= 3.3
...
Most sound SoC driver enable it and rely it on to properly work.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36072
2013-03-17 19:46:00 +00:00
a5e7687e12
kernel: load regmap modules after kmod-lib-lzo
...
Otherwise regmap-core will not be able to lookup the lzo exported
symbols.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36069
2013-03-17 19:45:42 +00:00
c730da325a
package/kernel: i2c: don't skip built-in modules
...
Don't skip build-in modules when generating i2c kmod packages, to allow
empty packages to be generated for satisfying dependencies.
Closes #12259 .
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35755
2013-02-23 11:30:30 +00:00
316706b09c
package/kernel: add package for the Gianfar PTP driver
...
PTP for gianfar can be built as a module. Create a package for it.
[juhosg: remove the mp85xx specific patch]
Patchwork: http://patchwork.openwrt.org/patch/3344/
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35706
2013-02-20 19:14:20 +00:00
9070d701e7
package/kernel: add package for the Freescale Gianfar driver
...
[juhosg: move the fsl-pq-mdio driver into a separate package]
Patchwork: http://patchwork.openwrt.org/patch/3345/
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35705
2013-02-20 19:14:15 +00:00
330ae61b1b
package/kernel: remove trailing whitespaces from *.mk files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35691
2013-02-20 09:41:48 +00:00
97e75d03cc
package/kernel: add package for the Freescale On-Chip EHCI Controller
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35627
2013-02-16 17:13:40 +00:00
4cc962a0eb
add nForce Ethernet module
...
Signed-off-by: Zhiqiang Wang <wang.9264@gmail.com>
SVN-Revision: 35461
2013-02-02 15:40:43 +00:00
0fb081bb5a
package ncm & qmi wwan
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3134/
SVN-Revision: 35360
2013-01-28 18:20:10 +00:00
0492391922
kernel: make usb2-pci depend on usb2 and not the other way around
...
SVN-Revision: 35339
2013-01-27 21:28:26 +00:00
6f59cd3fb8
kernel: activate input-matrixkmap for kernel 3.8
...
SVN-Revision: 35338
2013-01-27 21:23:33 +00:00
0d42d05242
kernel: add ehci-platform.ko and ehci-pci.ko when build with kernel 3.8
...
SVN-Revision: 35337
2013-01-27 21:19:48 +00:00
John Crispin
Luka Perkov
Felix Fietkau
Hauke Mehrtens
Nicolas Thill
Imre Kaloz
Jonas Gorski
Jo-Philipp Wich
Gabor Juhos
Florian Fainelli