Commit Graph

165 Commits (f58bfd1df4e4a9b84a0e94691986c38bab6d8730)

Author SHA1 Message Date
Gabor Juhos a1dcbc66a6 ar71xx: add initial support for the TL-WR2543N/ND board
The WLAN LEDs are not working yet.

SVN-Revision: 29680
2012-01-07 19:36:35 +00:00
Gabor Juhos 84cd8a5ee0 ar71xx: fix RB-750 network configuration
SVN-Revision: 29668
2012-01-06 07:20:54 +00:00
Gabor Juhos 232eb83f74 ar71xx: fix LED configuration on the RB-750
SVN-Revision: 29666
2012-01-05 18:08:28 +00:00
Gabor Juhos b8f0d86115 ar71xx: add inital support for the ALFA Network AP96 board
The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.

SVN-Revision: 29662
2012-01-04 21:13:54 +00:00
Gabor Juhos 2f53f82203 ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7
These models are based on the AP99 reference board,
and uses the AR7241 SoC.

SVN-Revision: 29658
2012-01-04 17:30:57 +00:00
Gabor Juhos 72019009c7 ar71xx: fix network configuration for the TL-WA901N/ND boards
SVN-Revision: 29654
2012-01-04 17:30:52 +00:00
Gabor Juhos 90bfef9ec9 ar71xx: allow to use LAN LED on the TL-WA901N/ND boards
SVN-Revision: 29653
2012-01-04 17:30:50 +00:00
Gabor Juhos 5eb502d9c1 ar71xx: add default LED configuration for the TL-MR3020
Also use the system LED for diagnostic.

SVN-Revision: 29652
2012-01-04 17:30:49 +00:00
Gabor Juhos 1045c83527 ar71xx: add support for TP-Link TL-MR3020
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29651
2012-01-04 17:30:47 +00:00
Gabor Juhos 1e68f10b87 ar71xx: add support for the ALFA Network N2/N5 boards
SVN-Revision: 29635
2012-01-01 19:30:25 +00:00
Gabor Juhos 5c067db8a7 ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards
SVN-Revision: 29631
2011-12-31 15:02:46 +00:00
Jonas Gorski 8799627ef0 ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H
Thanks netprince for reporting and testing.

SVN-Revision: 29595
2011-12-21 19:32:40 +00:00
Gabor Juhos 67c7980290 ar71xx: connect GMAC0 to the internal switch on DB120
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.

SVN-Revision: 29557
2011-12-15 22:25:38 +00:00
Gabor Juhos b9c5cb5c9a ar71xx: add support for ALFA Network's Hornet-UB board
SVN-Revision: 29535
2011-12-14 20:54:10 +00:00
Gabor Juhos 4cc2b9bb06 ar71xx: rewrite WNDR3700/3800 handling
SVN-Revision: 29434
2011-12-05 13:03:54 +00:00
Jo-Philipp Wich 78699c2e51 add some missing wndr3800 base-files definitions
SVN-Revision: 29433
2011-12-05 12:56:21 +00:00
Gabor Juhos f188f1bad5 ar71xx: add support for Ubiquiti AirRouter
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>

SVN-Revision: 29395
2011-12-01 22:49:02 +00:00
Gabor Juhos 0612667c34 ar71xx: configure default led behavior for the OM2P
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 29394
2011-12-01 22:48:59 +00:00
Gabor Juhos 39348e387f ar71xx: use /lib/functions/uci-defaults.sh
SVN-Revision: 29385
2011-12-01 22:48:47 +00:00
Gabor Juhos 8687fc3e41 ar71xx: generate ubootenv from uci-defaults instead of providing defconfig
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28971
2011-11-12 10:54:04 +00:00
Gabor Juhos 87704b8078 ar71xx: create TL-WA901ND network config from uci-defaults
SVN-Revision: 28833
2011-11-07 21:44:24 +00:00
Gabor Juhos 09fdfa444f ar71xx: create ALL0258N network config from uci-defaults
SVN-Revision: 28832
2011-11-07 21:44:23 +00:00
Gabor Juhos 63348f5fed ar71xx: create NBG{460N,550N,550NH} network config from uci-defaults
SVN-Revision: 28831
2011-11-07 21:44:20 +00:00
Gabor Juhos c3692c8331 ar71xx: create WZR-HP-G300NH network config from uci-defaults
SVN-Revision: 28830
2011-11-07 21:44:17 +00:00
Gabor Juhos ee1a07a11d ar71xx: create RB-493G network config from uci-defaults
SVN-Revision: 28829
2011-11-07 21:44:12 +00:00
Gabor Juhos d82d063d81 ar71xx: create TL-WR1043ND network config from uci-defaults
SVN-Revision: 28828
2011-11-07 21:44:11 +00:00
Gabor Juhos 68be590894 ar71xx: create WRT160NL network config from uci-defaults
SVN-Revision: 28827
2011-11-07 21:44:09 +00:00
Gabor Juhos 83901e47c9 ar71xx: create PB92 network config from uci-defaults
SVN-Revision: 28826
2011-11-07 21:44:08 +00:00
Gabor Juhos 22ab9fc9ad ar71xx: create DIR-825-B1 network config from uci-defaults
SVN-Revision: 28825
2011-11-07 21:44:07 +00:00
Gabor Juhos e866ba5753 ar71xx: create TL-WR{841N-v1,941ND} network config from uci-defaults
SVN-Revision: 28824
2011-11-07 21:44:03 +00:00
Gabor Juhos 9298c7afe5 ar71xx: create RB-450 network config from uci-defaults
SVN-Revision: 28823
2011-11-07 21:44:02 +00:00
Gabor Juhos ac256f97bd ar71xx: create RB-450G, RouterStation Pro network config from uci-defaults
SVN-Revision: 28822
2011-11-07 21:44:01 +00:00
Gabor Juhos 944ac3f6cf ar71xx: create RB-433{,U} network config from uci defaults
SVN-Revision: 28821
2011-11-07 21:43:58 +00:00
Gabor Juhos 6e8390ae6c ar71xx: create even more network configs from the uci-defaults script
Create the default network configuration dynamically for the
AR724x/AR9331 boards. Some other boards are using the same
configuration, so convert those as well.

SVN-Revision: 28820
2011-11-07 21:43:56 +00:00
Gabor Juhos b62560413a ar71xx: create more network configs from the uci-defaults script
Create the default network configuration dynamically for the boards with
swapped eth0, eth1 interfaces.

SVN-Revision: 28819
2011-11-07 21:43:54 +00:00
Gabor Juhos 6c92b26bac ar71xx: create a bunch of network configs from the uci-defaults script
Create the default network configuration dynamically for the boards with
a single ethernet interface.

SVN-Revision: 28818
2011-11-07 21:43:52 +00:00
Gabor Juhos 0a8e5dbf7b ar71xx: create generic network config from an uci-defaults script
SVN-Revision: 28817
2011-11-07 21:43:51 +00:00
Gabor Juhos 91f08d47c2 ar71xx: add initial support for the TL-WR741ND v4 board
The ethernet port LEDs are not working yet.

SVN-Revision: 28706
2011-11-01 11:20:52 +00:00
Gabor Juhos 43e2e2e4ef ar71xx: combine LEDs setup in one file
SVN-Revision: 28704
2011-11-01 11:20:49 +00:00
Gabor Juhos f372620ffa ar71xx: unify LED names on Planex boards
SVN-Revision: 28703
2011-11-01 11:20:47 +00:00
Gabor Juhos 66ab406d5a ar71xx: unify LED names on Buffalo boards
SVN-Revision: 28702
2011-11-01 11:20:46 +00:00
Gabor Juhos e7586959df ar71xx: unify LED names on TP-Link boards
SVN-Revision: 28701
2011-11-01 11:20:44 +00:00
Gabor Juhos 693c777eaf ar71xx: remove LED setup of nonexistent interfaces on RB750
SVN-Revision: 28693
2011-10-31 14:26:56 +00:00
Jo-Philipp Wich b61de9c865 base-files: make sure inittab-console-fixup returns with success (#10275)
SVN-Revision: 28562
2011-10-24 21:35:43 +00:00
Gabor Juhos e45d7d7006 ar71xx: enable login only on the system console by default
SVN-Revision: 28294
2011-09-23 19:56:38 +00:00
Jonas Gorski e18ceb1dac ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.

SVN-Revision: 27814
2011-07-28 11:57:51 +00:00
Gabor Juhos 4834fdaccd ar71xx: fix uci-defaults script for the WZR-HP-G30XNH boards
SVN-Revision: 27042
2011-05-31 22:53:12 +00:00
Gabor Juhos b39eebdf1e ar71xx: add uci config for the WLAN LED on the WRT160NL
Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>

SVN-Revision: 26861
2011-05-08 21:38:49 +00:00
Gabor Juhos 858e2e719b ar71xx: use phy0tpt trigger for the WLAN LEDs
SVN-Revision: 26860
2011-05-08 21:38:48 +00:00
Gabor Juhos 54ede24829 ar71xx: Add support for WZR-HP-G301NH
Add support for the Buffalo WZR-HP-G301NH. The only difference between it
and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S.
Since we don't do runtime detection of the switch, we need a separate
machine definition for it.

While we are at it, also rename the profile to reflect that it now is for
more than one device.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26601
2011-04-12 09:29:10 +00:00
Gabor Juhos 67c3e0bf7e ar71xx: add support for the WNDR3700v2 board
Based on a patch by Mark Mentovai <mark@moxienet.com>

SVN-Revision: 25118
2011-01-26 20:35:42 +00:00
Gabor Juhos 061228d73c ar71xx: make uci-default scripts executable
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>

SVN-Revision: 24897
2011-01-04 13:44:01 +00:00
Gabor Juhos e7ea6387a3 ar71xx: use usbdev trigger for USB LEDs by default
SVN-Revision: 24648
2010-12-17 17:10:16 +00:00
Gabor Juhos a26c3e60e2 ar71xx: populate LED configuration for WZR-HP-G300NH
Signed-off-by: Dave Lichterman <laviddichterman@gmail.com>

[nand-disk trigger has been removed - juhosg]

SVN-Revision: 24642
2010-12-17 17:09:57 +00:00
Gabor Juhos a2a5598c00 ar71xx: add wlan led for the TL-WR941ND
SVN-Revision: 24612
2010-12-15 19:55:50 +00:00
Gabor Juhos 081796fe47 ar71xx: add nbg460n image generation
This adds image generation for NBG460N/550N/550NH boards.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>

SVN-Revision: 24419
2010-12-10 15:17:03 +00:00
Felix Fietkau b3b2227869 Revert "ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)" on submitter's request
SVN-Revision: 23878
2010-11-04 18:53:18 +00:00
Felix Fietkau 77eee74d56 ar71xx: WNDR3700 WiFi LEDs should blink for activity (#7984)
Make the WiFi LEDs blink for activity on the WNDR3700, matching the
stock firmware and user expectations. The green 2.4GHz and blue 5GHz
LEDs will illuminate with the radio on, and will blink to indicate
transmission and reception.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 23877
2010-11-04 18:48:22 +00:00
Gabor Juhos b4336a8e2d ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boards
SVN-Revision: 22882
2010-09-03 18:14:37 +00:00
Jo-Philipp Wich 6616951c15 add uci-defaults script to migrate vlan 0 to vlan 1 after sysupgrade on devices using the RTL8366s switch
SVN-Revision: 22625
2010-08-13 19:29:51 +00:00
Gabor Juhos 518f43efd8 ar71xx: fix RB750 LED configuration
Patch-by: Ray Bellis

SVN-Revision: 21826
2010-06-17 09:24:26 +00:00
Gabor Juhos 8701291f0f ar71xx: add uci defaults to fix trx header on the WRT160NL boards
* patch by Otto Solares

SVN-Revision: 20526
2010-03-27 17:38:40 +00:00
Gabor Juhos 35bb7be34d ar71xx: Add basic WLAN LED control to TL-WR1043ND
* thanks to KillaB
  * closes #6834

SVN-Revision: 20415
2010-03-25 07:31:17 +00:00
Gabor Juhos 18ee1b6dda ar71xx: add uci-defaults for the RB750 board
SVN-Revision: 20097
2010-03-09 18:05:51 +00:00
Gabor Juhos 47990f61fb ar71xx: add uci configuration for the WAN LED on the WNDR3700
Based on a patch by Scott Dudley <spmsink@hotmail.com>

SVN-Revision: 19746
2010-02-19 11:52:25 +00:00