Gabor Juhos
|
3f749d1e8e
|
kernel: update linux 3.7 to 3.7.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35644
|
2013-02-17 21:32:42 +00:00 |
Gabor Juhos
|
62e80eba31
|
mpc85xx: add input drivers to default packages, and load those during preinit
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35626
|
2013-02-16 17:13:38 +00:00 |
Gabor Juhos
|
162b8e23a5
|
kernel: update linux 3.7 to 3.7.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35604
|
2013-02-15 07:36:15 +00:00 |
Gabor Juhos
|
9d86ba2ed4
|
mpc85xx: enable swconfig and the ar8216 driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35592
|
2013-02-13 16:51:23 +00:00 |
Gabor Juhos
|
6d18518e02
|
mpc85xx: enable the squashfs driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35591
|
2013-02-13 16:51:21 +00:00 |
Gabor Juhos
|
c3b3f77621
|
mpc85xx: enable XZ_DEC_BCJ and XZ_DEC_POWERPC support
Squashfs is unable to decompress some blocks without that:
[ 199.494500] SQUASHFS error: xz_dec_run error, data probably corrupt
[ 199.500910] SQUASHFS error: squashfs_read_data failed to read block 0xbff26
[ 199.508016] SQUASHFS error: Unable to read data cache entry [bff26]
[ 199.514440] SQUASHFS error: Unable to read page, block bff26, size 153f8
[ 199.521311] SQUASHFS error: Unable to read data cache entry [bff26]
[ 199.527724] SQUASHFS error: Unable to read page, block bff26, size 153f8
[ 199.534594] SQUASHFS error: Unable to read data cache entry [bff26]
[ 199.541009] SQUASHFS error: Unable to read page, block bff26, size 153f8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35590
|
2013-02-13 16:51:19 +00:00 |
Gabor Juhos
|
bae4bfe3f8
|
kernel: update linux 3.7 to 3.7.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35571
|
2013-02-12 09:51:11 +00:00 |
Gabor Juhos
|
1bb8ad6050
|
mpc85xx: enable GPIO sysfs interface
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35495
|
2013-02-05 07:48:02 +00:00 |
Gabor Juhos
|
6ba265a573
|
mpc85xx: enable Freescale eSPI driver and m25p80 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35494
|
2013-02-05 07:48:01 +00:00 |
Gabor Juhos
|
eea43ffd33
|
mpc85xx: sync kernel config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35493
|
2013-02-05 07:47:59 +00:00 |
Gabor Juhos
|
08ff976720
|
kernel: update linux 3.7 to 3.7.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35476
|
2013-02-04 10:02:56 +00:00 |
Gabor Juhos
|
ecf55822bb
|
mpc85xx: nuke 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35453
|
2013-02-02 10:05:43 +00:00 |
Gabor Juhos
|
242859abae
|
mpc85xx: switch to 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35452
|
2013-02-02 10:05:40 +00:00 |
Gabor Juhos
|
cde71c305c
|
mpc85xx: add support for linux 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35451
|
2013-02-02 10:05:37 +00:00 |
Gabor Juhos
|
257b21f2d4
|
mpc85xx: nuke 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35445
|
2013-02-01 17:49:56 +00:00 |
Gabor Juhos
|
cf2faab4ae
|
mpc85xx: switch to 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35444
|
2013-02-01 17:49:54 +00:00 |
Gabor Juhos
|
56849d146c
|
mpc85xx: add support for 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35443
|
2013-02-01 17:49:53 +00:00 |
Gabor Juhos
|
630fffbead
|
mpc85xx: fix dts name for P1010RDB
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35442
|
2013-02-01 17:49:52 +00:00 |
Gabor Juhos
|
495820f7a0
|
mpc85xx: remove broken flag
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35439
|
2013-02-01 17:28:54 +00:00 |
Gabor Juhos
|
4cb7e749ab
|
mpc85xx: build fdt file for the PB1010RDB board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35438
|
2013-02-01 17:28:51 +00:00 |
Gabor Juhos
|
20ca35570e
|
mpc85xx: enable PB1010RDB support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35437
|
2013-02-01 17:28:49 +00:00 |
Gabor Juhos
|
21b15ddda5
|
mpc85xx: image: fix building of multiple dtb files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35436
|
2013-02-01 17:28:47 +00:00 |
Gabor Juhos
|
1f516235ea
|
remove common symbols from 3.3 configs
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34403
|
2012-11-29 15:21:35 +00:00 |
John Crispin
|
a4d96aae8d
|
bump to 3.3.8
SVN-Revision: 32055
|
2012-06-05 06:57:51 +00:00 |
Gabor Juhos
|
2ae5581447
|
kernel: update linux 3.3 to 3.3.7
SVN-Revision: 31848
|
2012-05-23 21:05:32 +00:00 |
Gabor Juhos
|
39994008cb
|
linux: move certain disabled symbols to the generic configs
* CONFIG_ARCH_DMA_ADDR_T_64BIT
* CONFIG_ARCH_HAS_ILOG2_U32
* CONFIG_ARCH_HAS_ILOG2_U64
* CONFIG_ARCH_PHYS_ADDR_T_64BIT
* CONFIG_ARCH_SUPPORTS_MSI
* CONFIG_GENERIC_CPU_DEVICES
* CONFIG_HWMON_DEBUG_CHIP
* CONFIG_I2C_PXA_PCI
* CONFIG_LEDS_GPIO
* CONFIG_MINIX_FS_NATIVE_ENDIAN
* CONFIG_MLX4_CORE
* CONFIG_POWER_SUPPLY
* CONFIG_POWER_SUPPLY_DEBUG
* CONFIG_QUOTACTL
* CONFIG_SDIO_UART
* CONFIG_SENSORS_K10TEMP
* CONFIG_SENSORS_SCH56XX_COMMON
* CONFIG_SENSORS_VIA_CPUTEMP
* CONFIG_SERIO_AMBAKMI
* CONFIG_SERIO_I8042
* CONFIG_SERIO_LIBPS2
* CONFIG_SERIO_PCIPS2
* CONFIG_SERIO_RAW
* CONFIG_SERIO_SERPORT
* CONFIG_SPI_BITBANG
* CONFIG_SPI_GPIO
SVN-Revision: 31737
|
2012-05-15 10:58:52 +00:00 |
Gabor Juhos
|
b472e5d12e
|
kernel: update linux 3.3 to 3.3.6
SVN-Revision: 31709
|
2012-05-14 09:18:32 +00:00 |
Gabor Juhos
|
d5093de0b1
|
mpc85xx: remove 2.6.38 support
SVN-Revision: 31661
|
2012-05-09 10:48:41 +00:00 |
Gabor Juhos
|
ab71a428c5
|
mpc85xx: switch to 3.3 and add broken flag
It is compile tested only.
SVN-Revision: 31660
|
2012-05-09 10:48:39 +00:00 |
Gabor Juhos
|
70322ba3d1
|
move CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT to the target configs
SVN-Revision: 31547
|
2012-05-01 08:00:25 +00:00 |
Gabor Juhos
|
c59b60fa0b
|
mpc85xx: add support for 3.3
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
SVN-Revision: 31529
|
2012-04-29 15:55:28 +00:00 |
Gabor Juhos
|
f6d5998d31
|
mpc85xx: add kmod-booke-wdt to the default packages
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
SVN-Revision: 31523
|
2012-04-29 15:00:38 +00:00 |
Gabor Juhos
|
296086868a
|
mpc85xx: don't override CONFIG_WATHCDOG
SVN-Revision: 31521
|
2012-04-29 15:00:36 +00:00 |
Jo-Philipp Wich
|
a9e64493d8
|
target: globally disable BSD process accounting
SVN-Revision: 28584
|
2011-10-25 16:18:36 +00:00 |
Hauke Mehrtens
|
79a7343560
|
kernel: update to kernel 2.6.38.8
SVN-Revision: 27218
|
2011-06-18 15:52:15 +00:00 |
Hauke Mehrtens
|
a4c0645326
|
kernel: update kernel from 2.6.38.2 to 2.6.38.6 and refresh patches
Thank you Peter Wagner for the patch. I refreshed the kernel patches and added the md5sum of the kernel.
SVN-Revision: 26905
|
2011-05-15 17:23:02 +00:00 |
Michael Büsch
|
371bccb4c0
|
Update 2.6.38 to 2.6.38.2
SVN-Revision: 26332
|
2011-03-28 15:44:03 +00:00 |
Felix Fietkau
|
335877a2b3
|
global cflags: remove -funit-at-a-time, it is ignored by recent compilers. instead add -fno-caller-saves, which improves compression ratio for generated code with no apparent negative effects on performance
SVN-Revision: 26300
|
2011-03-26 01:07:12 +00:00 |
Felix Fietkau
|
f931708b8a
|
mpc85xx: update to linux 2.6.38, remove the broken flag
SVN-Revision: 26195
|
2011-03-16 18:31:27 +00:00 |
Felix Fietkau
|
2b6a84a7a3
|
mpc85xx: copy the fdt for mpc8548cds to $(BIN_DIR)
SVN-Revision: 26191
|
2011-03-16 18:04:54 +00:00 |
Felix Fietkau
|
733f2f8c76
|
mpc85xx: remove bogus config overrides
SVN-Revision: 26190
|
2011-03-16 18:04:49 +00:00 |
Florian Fainelli
|
45c9f5e75e
|
update to kernel 2.6.36.4
SVN-Revision: 25580
|
2011-02-19 12:44:07 +00:00 |
Felix Fietkau
|
a303220605
|
mpc85xx: disable the i8259 irq on mpc8548cds (but leave the controller initialized) - it shares an irq with the pcie device which causes irq storms
SVN-Revision: 25037
|
2011-01-18 14:43:44 +00:00 |
Felix Fietkau
|
8740549c57
|
mpc85xx: add a new 'spe_fpu' feature flag for the FPU used on freescale powerpc cpus The SPE FPU is ABI-incompatible with the regular powerpc FPU, this needs to be reflected in the toolchain target name. Fixes floating point crashes in user space
SVN-Revision: 25018
|
2011-01-16 01:25:06 +00:00 |
Felix Fietkau
|
d80506e8d5
|
mpc85xx: clean up bogus kernel config overrides
SVN-Revision: 25016
|
2011-01-16 01:24:57 +00:00 |
Felix Fietkau
|
d6d301bb14
|
mpc85xx: fix mpc8548 support (reorder serial ports, add default stdout path to device tree), enable pcie
SVN-Revision: 25015
|
2011-01-16 01:24:53 +00:00 |
Felix Fietkau
|
0f157c1ad2
|
mpc85xx: fix up kernel config and make the target boot on the MPC8568E-MDS-PB board
SVN-Revision: 24736
|
2010-12-20 14:25:25 +00:00 |
Hauke Mehrtens
|
b8ab3d34eb
|
kernel: update kernel versions Update kernel 2.6.32.26 to 2.6.32.27 Update kenrel 2.6.36.1 to 2.6.36.2
SVN-Revision: 24486
|
2010-12-11 16:07:21 +00:00 |
Imre Kaloz
|
044ea01f9c
|
preliminary support for Freescale MPC85xx based boards
SVN-Revision: 24259
|
2010-12-05 11:38:59 +00:00 |