Luka Perkov
907d0f76b7
imx6: enable XZ_DEC_BCJ and XZ_DEC_ARM
...
squashfs is unable to decompress some blocks without that:
[ 1.880530] SQUASHFS error: Unable to read page, block bc77a, size 14c50
[ 1.887268] SQUASHFS error: Unable to read fragment cache entry [bc77a]
[ 1.893889] SQUASHFS error: Unable to read page, block bc77a, size 14c50
[ 1.900636] SQUASHFS error: Unable to read fragment cache entry [bc77a]
[ 1.907275] SQUASHFS error: Unable to read page, block bc77a, size 14c50
[ 1.913994] SQUASHFS error: Unable to read fragment cache entry [bc77a]
[ 1.920631] SQUASHFS error: Unable to read page, block bc77a, size 14c50
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38202
2013-09-25 23:35:55 +00:00
Luka Perkov
2d1775dafc
imx6: fix spi on gw5400-a
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38201
2013-09-25 23:35:54 +00:00
Luka Perkov
77d075aa54
imx6: add support for gw51xx
...
The Gateworks GW51xx family of products is based on the Freescale
i.MX6DL SoC and offers a small form-factor with peripherals such as:
- i.MX6DL 512MB DDR3
- 256MB NAND FLASH
- 1x PCIe
- 1x USB EHCI (to PCIe socket)
- 1x USB OTG
- HDMI out
- Analog Video in
- Gateworks System Controller
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38189
2013-09-25 18:07:24 +00:00
Luka Perkov
f55d0ff66c
imx6: add support for gw54xx
...
The Gateworks GW54xx family of products is based on the Freescale
i.MX6Q SoC and offers a large variety of peripherals such as:
- i.MX6Q 1GB DDR3 (standard)
- 256MB NAND FLASH (standard)
- 6x PCIe (3x with USB)
- Optional expansion for additional USB/PCI based periperhals
- 1x USB EHCI
- 1x USB OTG
- HDMI Audio/Video in/out
- Analog Video in/out
- Analog Audio in/out
- Gateworks System Controller
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38188
2013-09-25 18:07:20 +00:00
Luka Perkov
cbcd3024dc
imx6: update gw5400-a dts cleanup
...
- remove dead code
- alphabatize
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38184
2013-09-25 17:55:38 +00:00
Gabor Juhos
0380904acb
kernel/3.10: refresh all target patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38182
2013-09-25 17:13:24 +00:00
Luka Perkov
c90e521790
imx6: update gw5400-a dts
...
- remove common imx6q-ventana.dtsi - there isn't enough commonality to
warrent this
- rename user led's to 1-based
- add alises used by bootloader
- clean up iomux gpios
- fix pfuze slave address
- enable sata
- add delay after release of pci reset downstream from PCIe switch
- remove PCIe clock configuration as its now handled in updated driver
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38081
2013-09-20 01:59:33 +00:00
Luka Perkov
3f059f58db
imx6: update PCIe driver
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38080
2013-09-20 01:59:32 +00:00
Luka Perkov
19bd25f4ec
imx6: update network defaults for Gateworks Ventana
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38079
2013-09-20 01:59:30 +00:00
Luka Perkov
cd1257ee0c
imx6: update config
...
* enable PERF_EVENTS
* enable REGULATOR_ANATOP
* enable VMSPLIT_2G
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38078
2013-09-20 01:59:29 +00:00
Luka Perkov
7c9b567371
imx6: drop inittab
...
It's the same as in base-files package.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38077
2013-09-20 01:59:27 +00:00
Gabor Juhos
554772a665
kernel: update 3.10 to 3.10.12
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38000
2013-09-15 16:00:41 +00:00
Luka Perkov
02e858d88c
imx6: add network defaults for GW5400-A
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37979
2013-09-13 21:50:35 +00:00
Luka Perkov
2964a11933
imx6: backport ahci support
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37936
2013-09-10 22:26:36 +00:00
Luka Perkov
b2c852e685
imx6: add i2c retry on NAK
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 37935
2013-09-10 22:26:34 +00:00
Luka Perkov
460fb06e63
imx6: add gpio sysfs support
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 37934
2013-09-10 22:26:33 +00:00
Gabor Juhos
d120ec18b2
kernel: update 3.10 to 3.10.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37890
2013-09-02 19:12:54 +00:00
Luka Perkov
18a767156e
imx6: add uboot-envtools to default packages
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37859
2013-08-29 23:06:32 +00:00
Luka Perkov
ae660e85d3
imx6: disable sdma until license issues are solved
...
Also, synchronize patches with upstream.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37853
2013-08-28 00:07:43 +00:00
Luka Perkov
ec52778a14
imx6: refresh 3.10 kernel config
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37850
2013-08-28 00:07:37 +00:00
Gabor Juhos
043edd8074
kernel: update 3.10 to 3.10.9
...
Also refresh 3.10 patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37832
2013-08-23 17:31:04 +00:00
Luka Perkov
acb9bc0f5e
kernel: remove imx-sdma-fw because of license issues
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37755
2013-08-12 10:48:05 +00:00
Luka Perkov
3258334e79
imx6: use kmod-imx-sdma-fw-imx6 by default
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37754
2013-08-11 15:10:44 +00:00
Luka Perkov
5337af031e
imx6: fix sdma
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37752
2013-08-11 15:10:38 +00:00
Luka Perkov
f5b9555cdc
imx6: sync usb chipidea with upstream
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37686
2013-08-04 14:20:15 +00:00
Luka Perkov
8a4726bca8
imx6: remove sdma binary
...
SVN-Revision: 37682
2013-08-04 13:28:26 +00:00
Felix Fietkau
28d03a9983
kernel: update remaning platforms accidentally left out of r37617
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37619
2013-07-30 08:00:25 +00:00
Luka Perkov
d6a23e1ae9
imx6: update default packages
...
SVN-Revision: 37582
2013-07-28 20:34:21 +00:00
Luka Perkov
a08eab3ce8
imx6: add support for EHCI USB
...
SVN-Revision: 37581
2013-07-28 20:34:19 +00:00
Gabor Juhos
e9688455f6
kernel: update 3.10 to 3.10.3
...
Also refresh 3.10 patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37546
2013-07-26 07:19:58 +00:00
Gabor Juhos
ef944dcb85
kernel: update 3.10 to 3.10.2
...
Also refresh 3.10 patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37502
2013-07-22 15:31:13 +00:00
Gabor Juhos
187a69c631
linux: move more ARM_ERRATA symbols to the generic config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37470
2013-07-20 07:43:54 +00:00
Jonas Gorski
b1b4e7db13
kernel: move CONFIG_NET_IP_TUNNEL to generic
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37465
2013-07-19 22:58:01 +00:00
Luka Perkov
6a985ed219
imx6: add missing patches (r37363)
...
SVN-Revision: 37364
2013-07-15 23:44:26 +00:00
Luka Perkov
af6eb6cc8c
imx6: add support for gw5400-a
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 37363
2013-07-15 23:18:39 +00:00
Luka Perkov
6ef9d30da7
imx6: use $PATH to locate dtc binary
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37362
2013-07-15 23:18:37 +00:00
Luka Perkov
75b911ddc1
imx6: switch to askconsole
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37326
2013-07-15 00:03:40 +00:00
Hauke Mehrtens
06accca1d7
kernel: update to kernel 3.10.1 and refresh patches
...
SVN-Revision: 37275
2013-07-13 22:45:09 +00:00
Luka Perkov
62cb88f502
imx6: make kernel_oldconfig
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37134
2013-07-02 23:08:16 +00:00
Jonas Gorski
96f8c15a36
kernel: update linux 3.10 to 3.10 final
...
3.10 final is out, so refresh patches and add md5sum.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37116
2013-07-01 13:21:06 +00:00
Florian Fainelli
6a4f2922f6
targets: prepare for supporting normal and initramfs images
...
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37049
2013-06-27 19:58:31 +00:00
Luka Perkov
4b21af4268
imx6: add new target
...
SVN-Revision: 36753
2013-05-29 01:27:29 +00:00