8ea5e19823
targets: fix remaining targets for initramfs builds
...
Fix some bugs that slipped through while making initramfs non exclusive.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37079
2013-06-28 22:56:34 +00:00
6d6296e214
orion: add support for the lacie 2big network device
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37059
2013-06-28 11:26:29 +00:00
799bdc990a
there's no reason to have these generic files in the bin dir either
...
SVN-Revision: 36852
2013-06-05 06:46:41 +00:00
28e8b8dc05
only copy uImages to the bin dir on ramdisk builds
...
SVN-Revision: 36851
2013-06-05 06:17:12 +00:00
e161581d45
don't copy the zImages to the bin dir, factory u-boots can't use them
...
SVN-Revision: 36850
2013-06-05 06:04:48 +00:00
58fa46c90c
drop support for the dns323
...
SVN-Revision: 36832
2013-06-04 11:13:18 +00:00
8e49dfe68a
the uImage's filename will hardly change
...
SVN-Revision: 33985
2012-10-29 09:55:20 +00:00
1a4f117398
rename erase size variables
...
SVN-Revision: 33964
2012-10-27 10:50:55 +00:00
549d5a6e34
add support for Netgear WN802T
...
SVN-Revision: 33963
2012-10-27 10:48:22 +00:00
25792cb971
generic: enhanced image Makefile
...
* Creation of uImage for WNR854T only done once (before 2x for jffs2 build and 1x for squashfs build)
* Got rid of unneccessary padding of rootfs partition
* ARM zImages always need a machine id, therefore do not copy generic (=no id) uImage to BIN_DIR, instead copy zImage
* Generalized functions for easier re-using and enhancing (e.g. D-Link DNS 323 implementation would be only a couple lines)
* Copy rootfs partitions to BIN_DIR, just like it is done for D-Link DNS 323
* Use variables to allows easily changing for custom builds, e.g. kernel mtd size for symbols
* Size check of kernel files to avoid builds that break devices
* Use for "-sysupgrade" and "-factory" in image names (like ar71xx, brcm63xx, etc.) to avoid questions about which image to use
Signed-off by: Matthias Buecher <mail@maddes.net>
SVN-Revision: 33174
2012-08-13 14:46:47 +00:00
930a820172
update wrt350nv2-builder to v2.4 and use new functionality for target orion_generic
...
Signed-off-by: Matthias Bücher <mail@maddes.net>
SVN-Revision: 31199
2012-04-04 16:06:25 +00:00
b47fc0f936
add support for D-Link DNS-323
...
this patch adds support for D-Link DNS323 storage device.
You can find more info here:
http://dns323.lukaperkov.net/
Currently you need serial cable to flash OpenWrt on DNS-323.
Signed-off-by: Luka Perkov < openwrt ->-to->- lukaperkov.net >
SVN-Revision: 31198
2012-04-04 15:53:55 +00:00
4ec905f3c9
target/linux/orion: create subtargets ( closes #8154 )
...
SVN-Revision: 23883
2010-11-04 22:10:11 +00:00
b2cb720494
fix Freecom DT2 jffs2 rootfs generation issue ( #7584 )
...
SVN-Revision: 22585
2010-08-10 20:13:49 +00:00
bea34111cc
fix jffs2 128k image generation, patch from madddes ( #7584 )
...
SVN-Revision: 22580
2010-08-10 16:13:01 +00:00
e2b57ecf5f
define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files
...
SVN-Revision: 20834
2010-04-12 23:15:56 +00:00
3c5ca326ec
Update to v2.2 fixed checksum byte calculation for other versions than 0x2019 fixed rare problem with padsize updated info to stock firmware 2.00.20 fixed typos
...
Signed off by: Matthias Buecher <mail@maddes.net>
SVN-Revision: 19683
2010-02-17 02:18:13 +00:00
cb9c37af38
Update to v2.1 Stays closer to the stock firmware by using wrt350n.bin for the created image. Adds the possibility to create the image in two separate steps (-b / -z). Makefiles now support the possibility to include a u-boot image for a 100%-stock-like image.
...
Signed off by: Matthias Buecher <mail@maddes.net>
SVN-Revision: 19596
2010-02-12 01:40:57 +00:00
82e1ed603f
missing prerequisite for Orion images Webupgrade image building for WRT350Nv2 needs zip package. Copy command for WRT350Nv2 recovery image overrides error code of webupgrade builder, moved behind brackets. Removed indention of comments to avoid output in log. Signed-off by: Matthias Buecher <mail@maddes.net>
...
SVN-Revision: 19183
2010-01-17 13:50:10 +00:00
62d2ed2657
build wrt350n v2 recovery and web upgrade images (based on patch from #5970 )
...
SVN-Revision: 18763
2009-12-12 00:45:32 +00:00
7f63e704b3
orion: fix image build on non-linux systems
...
SVN-Revision: 16938
2009-07-21 02:30:46 +00:00
f11f903b61
orion: Added initial support for Freecom DT2. Thanks to Zintis.
...
SVN-Revision: 14963
2009-03-22 12:38:24 +00:00
88dcf36525
generate webuploadable image for the wnr854t
...
SVN-Revision: 11589
2008-06-27 12:19:20 +00:00
a425a7506c
add preliminary Netgear WNR854T support
...
SVN-Revision: 11582
2008-06-26 13:53:27 +00:00
50f6031afc
generate orion images differently
...
SVN-Revision: 11576
2008-06-25 22:41:50 +00:00
e147bf8fa3
fixup machid workaround, generate uImage manually
...
SVN-Revision: 11497
2008-06-16 12:38:55 +00:00
983b22aa95
temporary hack to fixup the mach id for the wrt350nv2
...
SVN-Revision: 11459
2008-06-13 12:58:28 +00:00
7bb65fb9d7
add preliminary Marvell Orion support
...
SVN-Revision: 11352
2008-06-04 13:51:17 +00:00
Florian Fainelli
Felix Fietkau
Imre Kaloz
Alexandros C. Couloumbis
Nicolas Thill
Travis Kemen
Jo-Philipp Wich
Rod Whitby