d9a698e77c
added support for wrt54g3gv2-vf and new trx header format
...
- hacked addpattern due to changes in header format
- added "-5" to addpattern, some 0xFF are needed for trx2 header
"-4" broke CRC checking in CFE
- hacked trx.c due to new header format version
- added target to create trx-V2 images
the flashmap driver possibly needs to be customized.
SVN-Revision: 20433
2010-03-25 19:34:49 +00:00
eeb982177d
remove asterisk from default vlan ports in netconfig
...
SVN-Revision: 19910
2010-02-28 16:44:40 +00:00
96e4312e7e
switch: eliminate the asterisk from the switch port configuration and set it automatically on the first vlan, this aligns the broadcom vlan config with the swconfig format
...
SVN-Revision: 19909
2010-02-28 16:40:06 +00:00
2eebf6e0bd
add support for the MN-700 platform, closes #2575
...
SVN-Revision: 19863
2010-02-26 01:34:39 +00:00
a40daa8038
update kernel to version 2.4.37.9 and refresh patches
...
SVN-Revision: 19762
2010-02-19 21:30:10 +00:00
e0669e9cd3
preinit: use grep -q where applicable
...
SVN-Revision: 19480
2010-02-01 00:34:10 +00:00
40b531f5d2
fix brcm-2.4/brcm47xx failsafe init (thx, puchu)
...
SVN-Revision: 19365
2010-01-28 19:27:39 +00:00
795efe0382
fix syntax error in preinit ( #6575 )
...
SVN-Revision: 19344
2010-01-26 10:45:28 +00:00
056f25aedf
brcm-2.4/brcm47xx: fix typos and indenting in the preinit interface script (thx, cshore)
...
SVN-Revision: 19339
2010-01-26 02:15:32 +00:00
d690de9a0c
rename -brcm-2.4 preinit files to -brcm, as they're shared with brcm47xx
...
SVN-Revision: 19336
2010-01-25 23:06:47 +00:00
56bc02a305
add preinit modularization work by Daniel Dickinson (cshore)
...
SVN-Revision: 19331
2010-01-25 17:11:17 +00:00
0cde46b3e7
add support for OvisLink WL-1600GL
...
SVN-Revision: 19262
2010-01-21 23:48:23 +00:00
2a4a1eeae3
fix serial flash support ( #6442 )
...
SVN-Revision: 19171
2010-01-16 15:11:52 +00:00
46f75ee869
add WRT300N v1.1 support (patch from #6379 )
...
SVN-Revision: 18921
2009-12-24 10:58:09 +00:00
d55e721178
fix typo in switch config migration script
...
SVN-Revision: 18657
2009-12-05 12:39:28 +00:00
a4b1848387
add migration code to automatically convert old to new switch config on first boot, this will be removed at some point in the future
...
SVN-Revision: 18432
2009-11-15 23:19:39 +00:00
194f32bc26
change switch config to swconfig style format to remain consistent accross platforms
...
SVN-Revision: 18425
2009-11-15 18:43:46 +00:00
30f859403a
fix problem with 128MB ram.
...
This patch is out of broadcoms official source code
SVN-Revision: 18413
2009-11-13 20:32:47 +00:00
ef42fb4c13
sort all target config files
...
SVN-Revision: 18367
2009-11-11 09:27:13 +00:00
260aee67dc
fix failsafe, was accidentally broken by r18214. Thanks Daniel Gimpelevich
...
SVN-Revision: 18253
2009-11-01 01:09:56 +00:00
2d57b56bce
make etehrent work on wrt350n, thx sn9
...
SVN-Revision: 18214
2009-10-29 21:26:36 +00:00
43a802864a
Fix Buffalo WBR-G54 and WBR-B11 support (updated patch)
...
Signed-off-by: Roger Hardiman <roger@rjh.org.uk>
SVN-Revision: 17598
2009-09-16 18:14:29 +00:00
3d0c1254df
brcm-2.4 is the only non-2.6 target, it's pointless to note the kernelversion in other targets' Target-Name
...
SVN-Revision: 17102
2009-08-03 11:44:28 +00:00
09e06acbec
update profile to include the rtc driver
...
SVN-Revision: 17074
2009-08-01 11:10:02 +00:00
31fbb89034
add support for the WRT160N, patch from Westley Paynter
...
SVN-Revision: 17031
2009-07-27 13:00:23 +00:00
8d5a0d9721
This patch adds some vital exports for fuse24 to the kernel. (forgotten in #5186 ) Closes #5333
...
SVN-Revision: 16448
2009-06-14 11:36:58 +00:00
cec852c087
update to 2.4.37, tested on wrt54gs ( #4766 )
...
SVN-Revision: 16144
2009-05-28 15:55:54 +00:00
c3fb9f9226
brcm-2.4: disable ip_vs, refresh kernel config
...
SVN-Revision: 16139
2009-05-28 15:41:23 +00:00
d10e83e07c
profiles: madwifi is not supported on 2.4, remove atheros profile
...
SVN-Revision: 15944
2009-05-20 21:10:15 +00:00
4c406b52a2
brcm-2.4: rip out all /dev/nvram and nvram setting/committing code from the kernel
...
SVN-Revision: 15440
2009-04-27 14:51:26 +00:00
34939cad39
get rid of $Id$ - it has never helped us and it has broken too many patches ;)
...
SVN-Revision: 15242
2009-04-17 14:09:46 +00:00
de0332f86a
rename our /bin/login script to /bin/login.sh to avoid collisions with busybox - we always use -l on telnetd anyway
...
SVN-Revision: 15097
2009-04-04 09:35:55 +00:00
fc432e4371
move the mii_ioctl to generic patches, fixes ( #1802 )
...
SVN-Revision: 15045
2009-03-26 09:28:24 +00:00
beb4eae1fa
backport mii_ioctl_data fix to make wpa-supplicant roboswitch driver work ( #1862 )
...
SVN-Revision: 14891
2009-03-15 16:40:42 +00:00
f5fba5bc3c
Asus WL-330gE Support
...
Here is support for the compact Asus WL-330gE. It uses that all-in-one
5354 Broadcom chip that's also in the WL-520gU, so I assume USB
support can be soldered on. I've yet to open up the device, though.
Initial flashing is done through the CFE failsafe mode like on other
Asus devices, where you boot holding the reset button, the power LED
flashes, and you tftp an image.
Signed-off-by: David Cooper <dave@kupesoft.com>
SVN-Revision: 14624
2009-02-22 18:45:39 +00:00
f57651b042
fix a memory corruption bug in the linux 2.4 version of b44
...
SVN-Revision: 13955
2009-01-10 00:55:38 +00:00
4f5b45e3c2
b44: fix misalignment and space-saving in rx packet handling (significant throughput and cpu load improvement)
...
SVN-Revision: 13946
2009-01-09 03:06:37 +00:00
59a00d52a9
make broadcom-wl robust against implicit kernel config changes (e.g. netfilter), upgrade it from minor version .2 to .3 (adds fixed bssid support for ad-hoc)
...
SVN-Revision: 13912
2009-01-07 04:26:14 +00:00
9f8c82da09
Add hostapd-mini to default images where applicable
...
SVN-Revision: 13819
2009-01-02 05:12:46 +00:00
f47a4a58c5
fix sysupgrade support for brcm-2.4 and brcm47xx make mtd refresh based config append optional (leave enabled on x86)
...
SVN-Revision: 12657
2008-09-23 11:05:54 +00:00
88041e0f1b
final fix for BCM5354 USB cores, hopefully
...
SVN-Revision: 12499
2008-09-02 11:28:57 +00:00
5cf0db54c6
Package ip6t_limit and ip6t_frag for 2.4 kernels ( #3760 )
...
SVN-Revision: 12276
2008-08-11 06:38:48 +00:00
9b2e1bdd8d
fix Dell TrueMobile 2300 v1/v2 detection and network configuration ( closes #2788 )
...
SVN-Revision: 11935
2008-07-26 16:10:44 +00:00
4e9e2cba40
fix sierra patches
...
SVN-Revision: 11909
2008-07-22 15:16:43 +00:00
8894411b60
This is the Linksys-ported driver from WRT54G3G-ST_v2.00.9_US.tgz, re-based against 2.4.35 and repaired for obvious breakage (didn't use its device table, etc.).
...
Changes from Linksys tree:
- Remove 'vendor' and 'product' parameters; these aren't used in the
mainstream driver and seem to only have served to break it.
- Remove bogus 'sierra_device_ids' table, used with above.
- Changed references to 'sierra_device_ids' back to id_table
- Changed non-standard CONFIG_USB_SERIAL_SIERRA_3G (line 886) to
current module standard CONFIG_USB_SERIAL_SIERRAWIRELESS
- Added #include to enable pl2303 hack to remain until I can figure
out if it's still necessary.
Signed-off-by: RB <aoz.syn@gmail.com>
SVN-Revision: 11899
2008-07-21 20:40:14 +00:00
1a47f8142d
This series of patches closes the support gap on one of the explicitly supported platforms (WRT54G3G) by adding direct support for the Sierra Wireless 3G modems. Signed-off-by: RB <aoz.syn@gmail.com>
...
SVN-Revision: 11898
2008-07-21 20:36:16 +00:00
20937ce81a
(5/6) bcm57xx: bcm4785 incomplete reboot
...
I noticed my wrt350n would not reliably reboot after entering
the reboot command. I found this code in the source for the
wrt600n. It corrects the problem, and the wrt350n reboots
reliably now.
Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>
SVN-Revision: 11470
2008-06-15 11:10:43 +00:00
9621d872ca
(3/6) bcm57xx: preinit
...
This patch allows the bcm57xx module to work correctly with failsafe mode.
insmod doesn't return an error when a module loads but doesn't detect a switch.
I added the check_module function to load the module, then make sure
it doesn't just exit immediately. This allows preinit to only attempt to
load the bcm57xx module when switch-robo and switch-adm dont detect a switch.
The activate_gpio parameter to bcm57xx simply instructs the module to attempt
to activate the switch via gpio before probing for the switch.
Tested on wrt350n.
Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>
SVN-Revision: 11468
2008-06-15 11:10:13 +00:00
f9ad520e37
(2/6) bcm57xx: netconfig
...
Update the netconfig script to support boardtype 0x478. I've tested this
on the wrt350n, hopefully it will match the 600n as well.
Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>
SVN-Revision: 11467
2008-06-15 11:09:49 +00:00
473d5705bd
Include missing part of r11275. Fix fw_argX from CFE
...
SVN-Revision: 11340
2008-06-03 19:29:53 +00:00
Markus Wigge
Jo-Philipp Wich
Travis Kemen
Hauke Mehrtens
Felix Fietkau
Imre Kaloz
Andy Boyett
John Crispin
Florian Fainelli
Gabor Juhos
Peter Denison