Commit Graph

22835 Commits (eb2188c0e229799d7fc619fbff66d70f8f5b76c6)

Author SHA1 Message Date
Felix Fietkau d38be845f4 libubox: update to latest version, fixes blob/blobmsg endian issues
SVN-Revision: 34456
2012-12-02 16:50:39 +00:00
Felix Fietkau 697cbb6d2f tools/sstrip: remove redundant -I flag that breaks build on some x86_64 linux hosts
SVN-Revision: 34455
2012-12-02 16:17:33 +00:00
Hauke Mehrtens 2ac9ac5163 brcm47xx: read sprom vars without prefix for boardrev and boardtype if the prefixed one is not available.
SVN-Revision: 34454
2012-12-02 16:11:39 +00:00
Hauke Mehrtens 9362c121c8 b43-tools: pack the lcn firmware into the brcmsmac firmware package.
SVN-Revision: 34453
2012-12-02 16:09:23 +00:00
Hauke Mehrtens 3399d16dd7 broadcom-wl: get the mmio address directly from the struct if bcma is used.
SVN-Revision: 34452
2012-12-02 16:07:43 +00:00
Felix Fietkau c233a088f0 build: it is no longer necessary to call make target/linux/clean as part of make clean
SVN-Revision: 34451
2012-12-02 15:26:28 +00:00
Felix Fietkau 720ccbd95d kernel: move KERNEL_BUILD_DIR under BUILD_DIR to properly fix gcc/libc based dependencies
SVN-Revision: 34450
2012-12-02 15:26:24 +00:00
Felix Fietkau 38d3b8d0ea kernel: patch in a working copy of elf.h instead of using relative path based hackery in #include statements
SVN-Revision: 34449
2012-12-02 15:26:19 +00:00
Felix Fietkau 974a50ca4a sstrip: remove a redundant copy of elf.h
SVN-Revision: 34448
2012-12-02 15:26:15 +00:00
Jo-Philipp Wich 993ac4600a rules.mk: don't use $(realpath) in file_copy, the destination directory might not exist yet - spotted while doing a fresh build
SVN-Revision: 34447
2012-12-02 15:15:07 +00:00
Gabor Juhos e0e43655ce ramips: fix serial console for Belkin F5D8235 v1/v2
Based on a patch from #12533.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34445
2012-12-02 14:16:12 +00:00
Gabor Juhos 890f83dfb3 Update linux-atm fixes to reflect the final upstream pull request
[juhosg: refresh the patches with quilt]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34443
2012-12-02 13:04:04 +00:00
Gabor Juhos 5d8a7a0ce5 Make teql hotplug script run sooner
In particular, it wants to run before the ntpclient script. Which may
block for a long time attempting to do DNS lookups for NTP servers. In
my case, that would have *worked* if the new device had been added to
teql first, rather than timing out.

This was effectively causing a huge delay between an interface coming
up, and routing actually starting to work.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34442
2012-12-02 13:04:03 +00:00
Gabor Juhos 9691b3f4bf Change default TARGET_ROOTFS_RESERVED_PCT to zero to avoid wasted space
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34441
2012-12-02 13:04:01 +00:00
Jo-Philipp Wich 57d29c25f5 toolchain: use file_copy to install the initial gcc files
SVN-Revision: 34440
2012-12-02 12:20:47 +00:00
Jo-Philipp Wich 476ea2bcb4 imagebuilder: use file_copy to deploy files/ in the image generation phase
SVN-Revision: 34439
2012-12-02 12:20:43 +00:00
Jo-Philipp Wich a99b0363d0 package: use file_copy to deploy files/ in the package/install phase
SVN-Revision: 34438
2012-12-02 12:20:38 +00:00
Jo-Philipp Wich 828597693e rules.mk: provide a macro "file_copy" which removes any symlink in the destination dir that would be overwritten
SVN-Revision: 34437
2012-12-02 12:20:34 +00:00
Jo-Philipp Wich 9f3dc9afa7 toolchain: remove duplicate default in bintutils Kconfig
SVN-Revision: 34436
2012-12-02 11:27:23 +00:00
Florian Fainelli 4801705d83 remove support for ubicom32
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34432
2012-11-30 10:53:55 +00:00
Florian Fainelli 4a1e2123eb kernel: remove references to TARGET_ubicom32
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34431
2012-11-30 10:53:51 +00:00
Florian Fainelli 527afd0e9a remove target
This target is unused, does not support any off the shelf hardware and
has been a maintenance burden for quite some time now.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34430
2012-11-30 10:53:47 +00:00
Florian Fainelli a68f386663 disable sstrip when using musl
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34427
2012-11-29 21:43:05 +00:00
Florian Fainelli c830644d97 remove Linux 3.3 support
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34426
2012-11-29 21:43:02 +00:00
Florian Fainelli bf9af32738 gcc/4.5-linaro: backport musl patch
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34425
2012-11-29 21:42:58 +00:00
Florian Fainelli 763f780553 use a default kernel command-line to mount squashfs and jffs2
This fixes bug #9055.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34424
2012-11-29 21:42:53 +00:00
Steven Barth a0f0c23109 ipv6-support: Add conffiles section
SVN-Revision: 34423
2012-11-29 20:33:17 +00:00
Steven Barth a4edea5ef3 ipv6-support: Add new IPv6-support meta-package
SVN-Revision: 34422
2012-11-29 20:14:28 +00:00
Steven Barth e6e6e0d152 odhcp6c: Add new embedded DHCPv6 client
SVN-Revision: 34421
2012-11-29 20:14:23 +00:00
Steven Barth 25d943e872 6distributed: add local IPv6 prefix distributor
SVN-Revision: 34420
2012-11-29 20:14:18 +00:00
Steven Barth 7d3495b431 6relayd: Fix some RFC 6204 compatibility issues
SVN-Revision: 34419
2012-11-29 20:14:14 +00:00
Steven Barth dffa972af1 Remove old IPv6 sysctl-config (deprecated)
SVN-Revision: 34418
2012-11-29 20:14:09 +00:00
Steven Barth 3b0e77ee6b Remove default sysctl-entry for IPv6 here (races)
SVN-Revision: 34417
2012-11-29 20:14:04 +00:00
Gabor Juhos 7cde0281f4 kernel: Fix 8139cp ring buffer initialisation, tx timeout recovery, add BQL
Patches queued upstream in net-next.git

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34415
2012-11-29 17:58:28 +00:00
Gabor Juhos 4f5defdc3b ar71xx: switch to 3.6.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34414
2012-11-29 17:53:42 +00:00
Gabor Juhos ea17e36482 kernel: Update Geos to 3.6.8
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34411
2012-11-29 17:37:19 +00:00
Gabor Juhos 543c2c27d1 kernel: Add ATM fixes pending upstream merge (queue reduction, race fixes)
Patches about to go into net-next.git

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34410
2012-11-29 17:37:18 +00:00
Gabor Juhos df6727639a kernel: Add missing CONFIG_BATTERY_DS2781 option to generic 3.6 config
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34409
2012-11-29 17:37:16 +00:00
Gabor Juhos d90e805fe6 build: Add TARGET_ROOTFS_RESERVED_PCT option to reduce wasted space
The genext2fs tool will 'reserve' 5% of the image size by default,
apparently by creating a huge lost+found directory. In fact it seemed to
be much more than 5% in practice — I saw an image with 8MiB used, and
recovered about 2MiB of it by deleting the 'empty' lost+found directory:

/dev/loop0         48377  8482     37438  19% /mnt/spare
 # rmdir lost+found/
/dev/loop0         48377  6014     39906  14% /mnt/spare

This makes it configurable, but leaves it at the genext2fs default
of 5% for now. It should probably be changed to default to zero, but
that can be a separate patch.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34408
2012-11-29 17:37:15 +00:00
Gabor Juhos 44131bd785 ramips: rt305x: add profile and build image for the Asus RT-N13U
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34407
2012-11-29 17:37:14 +00:00
Gabor Juhos d3994b7408 ramips: rt305x: add user-space support for the Asus RT-N13U
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34406
2012-11-29 17:37:13 +00:00
Gabor Juhos 0ec59e6235 ramips: rt305x: add kernel support for the Asus RT-N13U Wireless-N300 Router
The work has been backported from openwrt-dreambox with
some modifications & code cleanup.

* updated config-3.3
* updated config-3.6
* renamed rt-n13 to rt-n13u
* fixed mach-rt-n13u.c

[juhosg: move user-space support and image generation into separate
patches]

Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34405
2012-11-29 17:37:11 +00:00
Gabor Juhos c2f018fca2 remove common symbols from 3.6 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34404
2012-11-29 15:21:41 +00:00
Gabor Juhos 1f516235ea remove common symbols from 3.3 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
Gabor Juhos 3a4d0ebd5c kernel: update linux 3.6 to 3.6.8
Also refresh the affected patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34402
2012-11-29 07:42:19 +00:00
Luka Perkov 769c322cd0 uboot-kirkwood: build in $(BUILD_DIR)
SVN-Revision: 34401
2012-11-29 01:04:37 +00:00
Jo-Philipp Wich d2d458324b gettext-full: use shipped libxml for the host build, fixes lzma references from creeping in on certain distributions
SVN-Revision: 34400
2012-11-28 21:02:53 +00:00
Florian Fainelli ee16e144bb use physmap-flash part_probe_types
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34398
2012-11-27 18:42:49 +00:00
Florian Fainelli 7196f5d7c8 image.mk: don't squash file permissions in JFFS2 images
Currently we call mkfs.jffs2 --squash, which will change
both file permissions and owners.

If we have some file with suid bits, it will clear these bits.

Thus it's enough to just squash file owners, by replacing that
argument to --squash-uids.

Signed-off-by: Jonh Wendell <jonh.wendell@oiwifi.com.br>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34397
2012-11-27 18:42:45 +00:00
Florian Fainelli 0588d13a3e Fix typo in 96338GW power LED.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34396
2012-11-27 18:42:42 +00:00