Felix Fietkau
24b31c9428
kernel: fix stripping symbol exports
...
SVN-Revision: 34458
2012-12-02 17:42:17 +00:00
Felix Fietkau
d38be845f4
libubox: update to latest version, fixes blob/blobmsg endian issues
...
SVN-Revision: 34456
2012-12-02 16:50:39 +00:00
Felix Fietkau
697cbb6d2f
tools/sstrip: remove redundant -I flag that breaks build on some x86_64 linux hosts
...
SVN-Revision: 34455
2012-12-02 16:17:33 +00:00
Hauke Mehrtens
2ac9ac5163
brcm47xx: read sprom vars without prefix for boardrev and boardtype if the prefixed one is not available.
...
SVN-Revision: 34454
2012-12-02 16:11:39 +00:00
Hauke Mehrtens
9362c121c8
b43-tools: pack the lcn firmware into the brcmsmac firmware package.
...
SVN-Revision: 34453
2012-12-02 16:09:23 +00:00
Hauke Mehrtens
3399d16dd7
broadcom-wl: get the mmio address directly from the struct if bcma is used.
...
SVN-Revision: 34452
2012-12-02 16:07:43 +00:00
Felix Fietkau
c233a088f0
build: it is no longer necessary to call make target/linux/clean as part of make clean
...
SVN-Revision: 34451
2012-12-02 15:26:28 +00:00
Felix Fietkau
720ccbd95d
kernel: move KERNEL_BUILD_DIR under BUILD_DIR to properly fix gcc/libc based dependencies
...
SVN-Revision: 34450
2012-12-02 15:26:24 +00:00
Felix Fietkau
38d3b8d0ea
kernel: patch in a working copy of elf.h instead of using relative path based hackery in #include statements
...
SVN-Revision: 34449
2012-12-02 15:26:19 +00:00
Felix Fietkau
974a50ca4a
sstrip: remove a redundant copy of elf.h
...
SVN-Revision: 34448
2012-12-02 15:26:15 +00:00
Jo-Philipp Wich
993ac4600a
rules.mk: don't use $(realpath) in file_copy, the destination directory might not exist yet - spotted while doing a fresh build
...
SVN-Revision: 34447
2012-12-02 15:15:07 +00:00
Gabor Juhos
e0e43655ce
ramips: fix serial console for Belkin F5D8235 v1/v2
...
Based on a patch from #12533 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34445
2012-12-02 14:16:12 +00:00
Gabor Juhos
890f83dfb3
Update linux-atm fixes to reflect the final upstream pull request
...
[juhosg: refresh the patches with quilt]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34443
2012-12-02 13:04:04 +00:00
Gabor Juhos
5d8a7a0ce5
Make teql hotplug script run sooner
...
In particular, it wants to run before the ntpclient script. Which may
block for a long time attempting to do DNS lookups for NTP servers. In
my case, that would have *worked* if the new device had been added to
teql first, rather than timing out.
This was effectively causing a huge delay between an interface coming
up, and routing actually starting to work.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34442
2012-12-02 13:04:03 +00:00
Gabor Juhos
9691b3f4bf
Change default TARGET_ROOTFS_RESERVED_PCT to zero to avoid wasted space
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34441
2012-12-02 13:04:01 +00:00
Jo-Philipp Wich
57d29c25f5
toolchain: use file_copy to install the initial gcc files
...
SVN-Revision: 34440
2012-12-02 12:20:47 +00:00
Jo-Philipp Wich
476ea2bcb4
imagebuilder: use file_copy to deploy files/ in the image generation phase
...
SVN-Revision: 34439
2012-12-02 12:20:43 +00:00
Jo-Philipp Wich
a99b0363d0
package: use file_copy to deploy files/ in the package/install phase
...
SVN-Revision: 34438
2012-12-02 12:20:38 +00:00
Jo-Philipp Wich
828597693e
rules.mk: provide a macro "file_copy" which removes any symlink in the destination dir that would be overwritten
...
SVN-Revision: 34437
2012-12-02 12:20:34 +00:00
Jo-Philipp Wich
9f3dc9afa7
toolchain: remove duplicate default in bintutils Kconfig
...
SVN-Revision: 34436
2012-12-02 11:27:23 +00:00
Florian Fainelli
4801705d83
remove support for ubicom32
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34432
2012-11-30 10:53:55 +00:00
Florian Fainelli
4a1e2123eb
kernel: remove references to TARGET_ubicom32
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34431
2012-11-30 10:53:51 +00:00
Florian Fainelli
527afd0e9a
remove target
...
This target is unused, does not support any off the shelf hardware and
has been a maintenance burden for quite some time now.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34430
2012-11-30 10:53:47 +00:00
Florian Fainelli
a68f386663
disable sstrip when using musl
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34427
2012-11-29 21:43:05 +00:00
Florian Fainelli
c830644d97
remove Linux 3.3 support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34426
2012-11-29 21:43:02 +00:00
Florian Fainelli
bf9af32738
gcc/4.5-linaro: backport musl patch
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34425
2012-11-29 21:42:58 +00:00
Florian Fainelli
763f780553
use a default kernel command-line to mount squashfs and jffs2
...
This fixes bug #9055 .
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34424
2012-11-29 21:42:53 +00:00
Steven Barth
a0f0c23109
ipv6-support: Add conffiles section
...
SVN-Revision: 34423
2012-11-29 20:33:17 +00:00
Steven Barth
a4edea5ef3
ipv6-support: Add new IPv6-support meta-package
...
SVN-Revision: 34422
2012-11-29 20:14:28 +00:00
Steven Barth
e6e6e0d152
odhcp6c: Add new embedded DHCPv6 client
...
SVN-Revision: 34421
2012-11-29 20:14:23 +00:00
Steven Barth
25d943e872
6distributed: add local IPv6 prefix distributor
...
SVN-Revision: 34420
2012-11-29 20:14:18 +00:00
Steven Barth
7d3495b431
6relayd: Fix some RFC 6204 compatibility issues
...
SVN-Revision: 34419
2012-11-29 20:14:14 +00:00
Steven Barth
dffa972af1
Remove old IPv6 sysctl-config (deprecated)
...
SVN-Revision: 34418
2012-11-29 20:14:09 +00:00
Steven Barth
3b0e77ee6b
Remove default sysctl-entry for IPv6 here (races)
...
SVN-Revision: 34417
2012-11-29 20:14:04 +00:00
Gabor Juhos
7cde0281f4
kernel: Fix 8139cp ring buffer initialisation, tx timeout recovery, add BQL
...
Patches queued upstream in net-next.git
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34415
2012-11-29 17:58:28 +00:00
Gabor Juhos
4f5defdc3b
ar71xx: switch to 3.6.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34414
2012-11-29 17:53:42 +00:00
Gabor Juhos
ea17e36482
kernel: Update Geos to 3.6.8
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34411
2012-11-29 17:37:19 +00:00
Gabor Juhos
543c2c27d1
kernel: Add ATM fixes pending upstream merge (queue reduction, race fixes)
...
Patches about to go into net-next.git
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34410
2012-11-29 17:37:18 +00:00
Gabor Juhos
df6727639a
kernel: Add missing CONFIG_BATTERY_DS2781 option to generic 3.6 config
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34409
2012-11-29 17:37:16 +00:00
Gabor Juhos
d90e805fe6
build: Add TARGET_ROOTFS_RESERVED_PCT option to reduce wasted space
...
The genext2fs tool will 'reserve' 5% of the image size by default,
apparently by creating a huge lost+found directory. In fact it seemed to
be much more than 5% in practice — I saw an image with 8MiB used, and
recovered about 2MiB of it by deleting the 'empty' lost+found directory:
/dev/loop0 48377 8482 37438 19% /mnt/spare
# rmdir lost+found/
/dev/loop0 48377 6014 39906 14% /mnt/spare
This makes it configurable, but leaves it at the genext2fs default
of 5% for now. It should probably be changed to default to zero, but
that can be a separate patch.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34408
2012-11-29 17:37:15 +00:00
Gabor Juhos
44131bd785
ramips: rt305x: add profile and build image for the Asus RT-N13U
...
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34407
2012-11-29 17:37:14 +00:00
Gabor Juhos
d3994b7408
ramips: rt305x: add user-space support for the Asus RT-N13U
...
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34406
2012-11-29 17:37:13 +00:00
Gabor Juhos
0ec59e6235
ramips: rt305x: add kernel support for the Asus RT-N13U Wireless-N300 Router
...
The work has been backported from openwrt-dreambox with
some modifications & code cleanup.
* updated config-3.3
* updated config-3.6
* renamed rt-n13 to rt-n13u
* fixed mach-rt-n13u.c
[juhosg: move user-space support and image generation into separate
patches]
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34405
2012-11-29 17:37:11 +00:00
Gabor Juhos
c2f018fca2
remove common symbols from 3.6 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34404
2012-11-29 15:21:41 +00:00
Gabor Juhos
1f516235ea
remove common symbols from 3.3 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
Gabor Juhos
3a4d0ebd5c
kernel: update linux 3.6 to 3.6.8
...
Also refresh the affected patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34402
2012-11-29 07:42:19 +00:00
Luka Perkov
769c322cd0
uboot-kirkwood: build in $(BUILD_DIR)
...
SVN-Revision: 34401
2012-11-29 01:04:37 +00:00
Jo-Philipp Wich
d2d458324b
gettext-full: use shipped libxml for the host build, fixes lzma references from creeping in on certain distributions
...
SVN-Revision: 34400
2012-11-28 21:02:53 +00:00
Florian Fainelli
ee16e144bb
use physmap-flash part_probe_types
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34398
2012-11-27 18:42:49 +00:00
Florian Fainelli
7196f5d7c8
image.mk: don't squash file permissions in JFFS2 images
...
Currently we call mkfs.jffs2 --squash, which will change
both file permissions and owners.
If we have some file with suid bits, it will clear these bits.
Thus it's enough to just squash file owners, by replacing that
argument to --squash-uids.
Signed-off-by: Jonh Wendell <jonh.wendell@oiwifi.com.br>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34397
2012-11-27 18:42:45 +00:00