Commit Graph

73 Commits (e30608b736f44e70da6bd29fbcfdc9dd5ec42f02)

Author SHA1 Message Date
John Crispin 27c10641a0 lantiq: use dwc2 by default on all ar9 boards
The dwc2 USB driver now works on Lantiq ar9, but the
default is still ltq-hcd-ar9. This patch switches to
dwc2 by default.

v2: all ar9 boards (v1 was just for BTHOMEHUBV3A and WBMR)

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 49254
2016-04-26 11:44:17 +00:00
John Crispin fa1927839e lantiq: install uboot-envtools by default on BTHOMEHUBV3A
The only way to access the u-boot console on the BTHOMEHUBV3A
is by soldering a serial console onto some really tiny pads.

To enable installation without soldering it would be helpful
to be able to modify the uboot environment from within
the ramdisk image used as part of the installation process.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 49253
2016-04-26 11:44:13 +00:00
Felix Fietkau 04ad02d132 lantiq: Switch to the new SPI driver
Compared to the "old" driver:
- Each device must assign a pinctrl setting to the SPI node to allow the
  new SPI driver to configure the SPI pins.
  While here we are also using separate input and output settings so we
  are independent of whether the bootloader configures the pins correctly.
- We use the new "compatible" strings to make the driver choose the
  correct number of chip-selects for each SoC.
- The new driver starts counting the chip-selects at 1 (instead of 0, like
  the old one did). Thus we have to adjust the devices accordingly.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48293
2016-01-17 19:56:03 +00:00
Felix Fietkau af857db692 lantiq: Disable CONFIG_SPI_GPIO
All devices are now using the HW SPI driver, so this is not necessary
anymore.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48291
2016-01-17 19:55:48 +00:00
Felix Fietkau 435e7fb295 lantiq: move esi calls to dsl_cpe_control scripts to fix ordering wrt. loading vr9 drivers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47764
2015-12-04 17:42:51 +00:00
John Crispin b9963bbe80 lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)
lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)

Signed-off-by: Jannis Pinter <jannis@pinterjann.is>

SVN-Revision: 46224
2015-07-07 13:44:58 +00:00
John Crispin 257671615b lantiq: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44812
2015-03-16 07:39:52 +00:00
John Crispin d15ac306fa kernel: move KERNFS to generic config
KERNFS symbol is selected by SYSFS, so place it in generic config.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44615
2015-03-06 07:56:47 +00:00
John Crispin f04a268a04 kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED
Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since
only one platfrom (omap) needs them.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44614
2015-03-06 07:56:34 +00:00
John Crispin 6617845711 kernel: move MTD_SPLIT_SUPPORT to generic config
CONFIG_MTD_SPLIT_SUPPORT symbol default value is 'y' and many platform
specific configs explicitly enables it, while no one platform disables
this symbol. So place it in generic config and remove from platform
specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44612
2015-03-06 07:56:08 +00:00
John Crispin 7886cced18 kernel: remove GENERIC_NET_UTILS from platform configs
CONFIG_GENERIC_NET_UTILS is selected by CONFIG_NET and already enabled
in generic config, so we don't need this symbol in platform specific
configurations.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44611
2015-03-06 07:55:57 +00:00
Jonas Gorski 3139140339 kernel: move CONFIG_MIPS_O32_FP64_SUPPORT to generic configs
Most MIPS targets have it disabled, so move the symbol to the generic
configs to keep target configs small.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44583
2015-03-01 11:37:15 +00:00
John Crispin 826b461427 lantiq: add 3.18 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44348
2015-02-09 12:13:25 +00:00
John Crispin 9d7d29439b lantiq: BT Home Hub 3A - profile
BT Home Hub 3A - profile

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 43878
2015-01-08 20:25:41 +00:00
John Crispin ddb9bf4bac lantiq xway: generate ramdisk image by default
The installation process on nand-based boards using ubi
like the BTHOMEHUBV2B makes use of a ramdisk image, so it
makes sense to generate this by default.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 42920
2014-10-14 19:01:10 +00:00
John Crispin 12b73579e4 lantiq: update to 3.14
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42188
2014-08-18 13:09:30 +00:00
John Crispin 3836d40a8a lantiq: fix dgn3500 ethernet
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41854
2014-07-28 08:06:40 +00:00
John Crispin 6134a3de30 target/linux/*: more dead package cleanups
found 2 more

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41574
2014-07-10 20:15:50 +00:00
John Crispin 32e93efc73 target/linux/*: more dead package cleanups
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41571
2014-07-10 20:05:43 +00:00
John Crispin 4e35eef1d7 lantiq xway: disable gluebi and enable ubiblock
Disables gluebi and enables ubiblock on lantiq xway. Squashfs
images on nand use ubifs instead of jffs2 for the overlay.

I'll leave the equivalent patch for xrx200 to someone who has a
board to test.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41565
2014-07-10 19:16:35 +00:00
John Crispin d219e055be lantiq: remove deprecated jffs2_nand configuration
As far as I am aware, amongst the lantiq boards, jffs2_nand was
only used on the BTHOMEHUBV2B. Ubi-related modifications to the
device tree for that board mean that the resulting jffs2 images
no longer work, and are no longer required anyway. So I suggest
removing the related configuration, which this patch does.

If anyone else is using jffs2_nand on a lantiq target please speak
up!

Incidentally, for a jffs2 rootfs partition concatenated to the
kernel image to be recognised and mounted correctly on nand
this patch or something equivalent is required:
http://patchwork.openwrt.org/patch/5110/
It is marked as accepted in patchwork but doesn't seem to have
been committed. As far as I am concerned it too is deprecated.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41312
2014-06-24 18:12:52 +00:00
John Crispin e9f664c879 kernel: make sure the new UBIBLOCK symbol does not break builds
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41134
2014-06-11 13:00:17 +00:00
John Crispin ac5d5cbc79 kernel: add a NAND_SUPPORT symbol
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41122
2014-06-11 12:59:22 +00:00
John Crispin 4f3c740110 lantiq: BT Home Hub 2B - overlayfs on top of ubi
BT Home Hub 2B: use overlayfs on top of ubi.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 40553
2014-04-22 08:08:46 +00:00
John Crispin 709cab91d2 lantiq: BT Home Hub 2B support - board support
Board support patch for BT Home Hub 2B

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 40370
2014-04-03 14:26:54 +00:00
John Crispin 5a6268c078 lantiq: add esi
http://patchwork.openwrt.org/patch/3703/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40326
2014-03-30 09:16:43 +00:00
John Crispin e733242a23 lantiq: add support for Arcadyan ARV7519PW
This patch adds almost full support for this board.

- WiFi is still not working
- USB will not power up. According to some reports, it may be a passive port

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40319
2014-03-30 09:16:15 +00:00
John Crispin 053d596297 lantiq: Add support for Astoria ARV7510PW22
This board is pretty similar to ARV752DPW22.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 39303
2014-01-15 19:16:51 +00:00
Luka Perkov 26dcf1c7c9 lantiq: update kernel configuration
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39296
2014-01-15 14:11:36 +00:00
John Crispin f58b424c9e lantiq: improve Arcadyan ARV4510PW support
Arcadyan ARV4510PW has already a build profile in OpenWrt, but it is
severely lacking. This patch brings it up-to-date.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 39230
2014-01-12 12:07:07 +00:00
Felix Fietkau a30681dff0 build: unify mips target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38210
2013-09-26 17:53:14 +00:00
Luka Perkov 43f1a47430 lantiq: add initial support for Siemens GIGASX76X
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38050
2013-09-19 00:50:48 +00:00
Luka Perkov 3b33adeb99 lantiq: add support for ZyXEL P2601HNFX
SVN-Revision: 38049
2013-09-19 00:50:46 +00:00
Luka Perkov 7d2c5682b9 lantiq: add support for ZTE H201L
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38048
2013-09-19 00:50:44 +00:00
John Crispin 8ff756cdc9 lantiq: fix up default firmware selection for spanish and italian routers
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38039
2013-09-18 16:31:32 +00:00
John Crispin 1878a3d6ab lantiq: add v3.10 patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38031
2013-09-17 21:46:10 +00:00
John Crispin cd668944ef lantiq: add wifi eep to a803 dts file
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38030
2013-09-17 21:46:04 +00:00
John Crispin 18b76c66fb lantiq: add a subtarget for the xrx200 SoC family
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38029
2013-09-17 21:46:00 +00:00
Luka Perkov 27fa640548 lantiq: add (incomplete) support for Aztech GR7000
*) can not connect to switch chip
*) only one usb port is working
*) wifi is not working

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37712
2013-08-06 10:17:16 +00:00
John Crispin 288adb6634 lantiq: several a803 related fixes
based on work from Matti Laasko that he posted in the wiki

Signed-off-by: John Crispin <blogic@openwrt.or

SVN-Revision: 37704
2013-08-05 10:42:00 +00:00
John Crispin a2c5540727 lantiq: add profile for TP-Link TDW8970
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37542
2013-07-25 20:29:20 +00:00
Luka Perkov 1a3ad5a037 lantiq: add device tree support for arv4519pw
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37178
2013-07-05 07:44:42 +00:00
John Crispin 44b1688e6c lantiq: Tune the XWAY subtarget cflags
This patch sets the cflags -mtune=34kc -mdsp only in XWAY subtarget, while the others remain with mtune=mips32r2.
Although the Danube has a Mips 24KEc core performs well with the above cflags.

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>

SVN-Revision: 37006
2013-06-21 16:54:15 +00:00
John Crispin 5d441ae7ea lantiq: set mips16 support.
Set mips16 support in XWAY subtarget.

This patch is based in changeset #36600

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37005
2013-06-21 16:54:07 +00:00
Jonas Gorski 1beaf031d1 target: don't build jffs2 nor images by default
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36863
2013-06-05 20:58:59 +00:00
John Crispin d5f87e193c add VG3503J support
this adds basic support. the bootloader on these units is locked down.

until we have a replacement we can do basic testing with these env variables in uboot.

set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize)
set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000

unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle.

please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36315
2013-04-11 19:18:07 +00:00
John Crispin 9b4a8c6d1e select vdsl packages on vr9 boards
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36028
2013-03-14 18:43:44 +00:00
John Crispin e3a6ea65e1 add support for AudioCodes AC-252
user-space support for extracting the EEPROM for the RaLink WiFi is still
missing. Besides this, it's all working.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 35990
2013-03-12 13:52:54 +00:00
John Crispin 5eb43d4cf8 Add support for ARV4518PW R01 and rename R01A.
There are two different versions of SMC7908A-ISP: R01 and R01A.
R01 has an internal clock for PCI, meanwhile R01A has an external clock.

This fixes: https://dev.openwrt.org/ticket/12884

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 35352
2013-01-28 17:42:59 +00:00
John Crispin 379cd6e25e dont use input layer for gpio buttons
SVN-Revision: 34839
2012-12-21 20:04:20 +00:00