Commit Graph

8672 Commits (df48d71d7246ff4097118d33dee628cca9d1f697)

Author SHA1 Message Date
Gabor Juhos 5ce9c90ca8 ar71xx: airrouter reset button support
This patch adds support for reset button to Ubiquiti Airrouter AP.

[juhosg: fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]

Signed-off-by: Rocco Folino <lordzen@autistici.org>

SVN-Revision: 32676
2012-07-12 08:34:18 +00:00
Luka Perkov 283021ac15 ocf: update to version 20120127
SVN-Revision: 32672
2012-07-11 23:38:14 +00:00
Hauke Mehrtens 45d55161a6 kernel: bcma: update to version from wireless-testing tag master-2012-07-11
SVN-Revision: 32670
2012-07-11 22:17:05 +00:00
Florian Fainelli b94d9eb302 remove bcm63xx_pci_register() call in livebox board
SVN-Revision: 32661
2012-07-11 09:15:26 +00:00
Florian Fainelli f8446c3d4c use physmap-flash on livebox (#8677)
SVN-Revision: 32660
2012-07-11 09:15:22 +00:00
Florian Fainelli 8765e49fbe nuport-mac: check netif_receive_skb() return value
We did not reassign status to netif_receive_skb() return value, we thus
almost always incremented the dropped counter because the descriptor status
value never matches the NET_RX_DROP.

SVN-Revision: 32659
2012-07-11 08:29:01 +00:00
Florian Fainelli 93bf00ff36 fix typo on of_node_put()
SVN-Revision: 32653
2012-07-09 14:44:15 +00:00
Florian Fainelli bb1488e5e7 Detect alternative "cfe-" version bootloaders (found in 963281T_TEF board)
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32643
2012-07-06 22:10:37 +00:00
Gabor Juhos fe015f399f ar71xx: swizzle address for PCI byte/word access on AR71xx
Closes #11683.

SVN-Revision: 32639
2012-07-06 16:33:12 +00:00
Gabor Juhos b39df5bb81 ar71xx: select SOC_AR933X and ATH79_DEV_WMAC for the OM2P board
SVN-Revision: 32638
2012-07-06 11:12:02 +00:00
Gabor Juhos e258367c19 ar71xx: merge new board patches into the generic patch
SVN-Revision: 32637
2012-07-06 11:12:01 +00:00
Gabor Juhos b020a7e7c3 ar71xx: OM2P LC sysupgrade patch
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 32635
2012-07-06 11:11:58 +00:00
Florian Fainelli 110fd3525a call of_node_put() on ethernet node
SVN-Revision: 32628
2012-07-05 18:46:55 +00:00
Florian Fainelli a8fab2cb78 fix EPHY clock bit definition after r32489
SVN-Revision: 32627
2012-07-05 18:46:52 +00:00
Florian Fainelli 81681d7367 give an unique partition identifier for dLAN USB Extender Combined partition
SVN-Revision: 32626
2012-07-05 18:46:48 +00:00
Gabor Juhos eabf96dc22 ar71xx: set firmware version for the TL-WR2543N
This ensures that the resulting firmware can
be flashed from the latest (v3.13.17) offical
firmware.

SVN-Revision: 32617
2012-07-05 16:25:31 +00:00
Gabor Juhos 7c932579fa ar71xx: make 2.4GHz wlan LED work on the WR2543N
Because ath9k does not supports separate LEDs for
different bands yet, the 2.4GHz LED will show the
activity, even if the 5GHz band is selected.

SVN-Revision: 32615
2012-07-05 16:25:26 +00:00
Gabor Juhos b2f0476871 ar71xx: OM2P sysupgrade support
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 32613
2012-07-05 08:26:57 +00:00
Gabor Juhos 797944d3f1 ar71xx: add support for the OpenMesh OM2P-LC board
Patch-by: Marek Linder <marek@open-mesh.com>

SVN-Revision: 32611
2012-07-05 08:26:53 +00:00
Gabor Juhos 1ea2a3cfd8 ar71xx: add profile and build image for the Atheros AP136 reference board
SVN-Revision: 32609
2012-07-05 08:26:51 +00:00
Gabor Juhos b219848bfc ar71xx: AP136 user-space support
SVN-Revision: 32608
2012-07-05 08:26:50 +00:00
Gabor Juhos f0cda65bb6 ar71xx: add initial support for the Qualcomm Atheros AP136 board
SVN-Revision: 32607
2012-07-05 08:26:48 +00:00
Gabor Juhos d1b237b335 ar71xx: add initial support for the QCA955X SoCs
SVN-Revision: 32606
2012-07-05 08:26:47 +00:00
Gabor Juhos 7284cf73d6 ar71xx: refactor PCI code to allow registering multiple PCI controllers
SVN-Revision: 32605
2012-07-05 08:26:45 +00:00
Gabor Juhos 6b8392eb12 generic: ar8216: start aneg on each PHY of the AR8327
SVN-Revision: 32604
2012-07-05 08:26:39 +00:00
Florian Fainelli 0fdac1102d add missing interrupts properties to some device nodes
SVN-Revision: 32603
2012-07-04 19:37:11 +00:00
Felix Fietkau bfef2d17eb ar71xx: update the EW Dorin MTD layout, increase kernel partition size (requested by EW)
SVN-Revision: 32599
2012-07-04 10:55:56 +00:00
Jonas Gorski 0a3e9c3148 bcm63xx: bcm63xx-spi does not depend on spi-bitbang
SVN-Revision: 32594
2012-07-03 21:42:17 +00:00
Jonas Gorski fad888a85c bcm63xx: 96348A-122 improvements (Comtrend 5365)
1) Improve WLAN button.
2) Add 96348A-122 image.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32593
2012-07-03 21:42:15 +00:00
Jonas Gorski 0c7e676342 bcm63xx: fix second caldata address calculation
thanks Noltari for spotting this.

SVN-Revision: 32592
2012-07-03 21:42:12 +00:00
Jonas Gorski 988147111c bcm63xx: update patches to latest upstream versions
SVN-Revision: 32591
2012-07-03 21:42:07 +00:00
Jonas Gorski 1e2262df76 kernel: generic: spi: allow empty (un)prepare transfer
SVN-Revision: 32590
2012-07-03 21:42:03 +00:00
Gabor Juhos b8618fd3f2 ar71xx: improve MDIO busy wait code
SVN-Revision: 32586
2012-07-03 15:24:02 +00:00
Gabor Juhos 86013d40d5 ar71xx: remove the built-in MTD map of the ALL0258N
Pass the mtd_layout via the kernel command line instead.
Also increase the kernel partition size to 1024k, so current kernel can fit in.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32585
2012-07-03 15:24:01 +00:00
Florian Fainelli 4cdc4b1f36 refresh patches
SVN-Revision: 32581
2012-07-03 09:45:46 +00:00
Hauke Mehrtens bd9fa13c73 kernel: ssb/bcma: update to version from wireless-testing tag master-2012-07-02
SVN-Revision: 32580
2012-07-02 23:12:58 +00:00
Florian Fainelli 52bae2d2bd fix watchdog and rng drivers section mismatch (#11767)
SVN-Revision: 32522
2012-06-29 09:07:54 +00:00
Felix Fietkau 5570b76642 ar71xx: detect and enable MIPS DSP extensions, AR9344 supports them (fixes #11762)
SVN-Revision: 32520
2012-06-28 16:05:08 +00:00
Felix Fietkau a5c684de26 kernel: switch openwrt default to TCP cubic from westwood (patch by Dave Täht)
Despite Westwood's theoretical advantages, in nearly
every benchmark we ran last year, TCP cubic won, whether it be
on correct RTT estimates, amount of buffering, responsiveness,
etc. on current hardware and software designs.

(both need timestamps on to work well, besides)

TCP cubic is better maintained and understood than westwood,
also.

While a scenario where westwood would win possibly exists,
there is too much buffering in the wifi stack in particular
at present, to see any improvement.

If you wish to exercise various TCPs under contention,
the current svn head of netperf (2.6) has options to switch
congestion control agorithms on the fly, as does iperf.

SVN-Revision: 32514
2012-06-27 22:32:47 +00:00
Florian Fainelli 1d7878a38b fix SPI clock frequency selection
SVN-Revision: 32512
2012-06-27 22:14:50 +00:00
Felix Fietkau 41909c6568 kernel: add missing config symbol
SVN-Revision: 32498
2012-06-24 20:21:27 +00:00
Vasilis Tsiligiannis eee358338c ramips: mac address detection for Fonera 2.0n
Detect and apply MAC address of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>
Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>

SVN-Revision: 32490
2012-06-23 13:58:29 +00:00
Florian Fainelli 81e8757da4 provide an early ioremap cookie of the system configuration register
SVN-Revision: 32489
2012-06-23 11:03:50 +00:00
Florian Fainelli 98b2bc9189 group SYSDBG register defines in mcs814x.h
SVN-Revision: 32488
2012-06-23 11:03:45 +00:00
Florian Fainelli a8965f0005 make hardware.h a forward inclusion of mcs814x.h
mach/hardware.h is soon to be removed by upstream kernel

SVN-Revision: 32487
2012-06-23 11:03:40 +00:00
Florian Fainelli 7c984552ed remove platform specific initialization from ethernet driver
Hardware filtering must always be enabled as long as there is an Ethernet
device registered, and use device tree for setting the link activity and
buffer shifting enable/disable bit.

SVN-Revision: 32486
2012-06-23 11:03:35 +00:00
Florian Fainelli 2c47bbc199 regroup interrupt controller register definitions in hardware.h
SVN-Revision: 32485
2012-06-23 11:03:29 +00:00
Florian Fainelli 481c9faf20 remove handle_irq callback in board-mcs8140-dt.c
This should have been removed in r32470.

SVN-Revision: 32481
2012-06-21 12:20:47 +00:00
Florian Fainelli 4b33e0996e fix USB led triggers
SVN-Revision: 32474
2012-06-20 21:58:00 +00:00
Florian Fainelli a98c74164e use generic uci defaults functions
SVN-Revision: 32473
2012-06-20 21:57:56 +00:00
Florian Fainelli 007fa4d638 remove uselss cache invalidations
SVN-Revision: 32472
2012-06-20 21:57:53 +00:00
Florian Fainelli 9a2367aa6d improve ethernet driver debugging
SVN-Revision: 32471
2012-06-20 21:57:49 +00:00
Florian Fainelli 3b0dba382b do not use MULTI_IRQ_HANDLER it is bogus on our platform
This caused stalls in the Ethernet DMA block, so until properly
written and sorted out, fallback to the assembly version instead.

SVN-Revision: 32470
2012-06-20 21:57:45 +00:00
Mirko Vogt f45cd30543 verified to work - remove broken flag
SVN-Revision: 32469
2012-06-20 19:04:35 +00:00
Vasilis Tsiligiannis 1978c07539 Fix sysupgrade for squashfs, jffs2 and ext4 images
* use 'fsync' with 'dd' for image writing
	* save config to boot partition

SVN-Revision: 32465
2012-06-19 22:36:53 +00:00
Florian Fainelli f4afa00862 add Moschip MSC814x support
This target currently only supports Moschip's MCS8140 SoC, but support
for other chips in the same family (MCS8142, MCS8144) will be easy to add.

Target support is entirely using Device Tree for probing peripherals.
Drivers support include:
- PCI
- USB 1 & 2
- watchdog
- random number generator
- UART
- timer
- internal Ethernet PHY
- Ethernet MAC core

Support for the following boards is included using Device Tree
- Devolo dLAN USB Extender
- Tigal RBT-832

SVN-Revision: 32462
2012-06-19 14:48:56 +00:00
Gabor Juhos 7c87391c55 ar71xx: create profile and build image for the TL-WDR4300 board
SVN-Revision: 32461
2012-06-19 11:51:20 +00:00
Gabor Juhos 2d97a52045 ar71xx: add user space support for the TL-WDR4300
SVN-Revision: 32460
2012-06-19 11:51:18 +00:00
Gabor Juhos 8b9931fd27 ar71xx: add support for the TL-WDR4300 board
SVN-Revision: 32459
2012-06-19 11:51:17 +00:00
Gabor Juhos e6a10d5cdd ar71xx: refresh patches
SVN-Revision: 32458
2012-06-19 11:51:15 +00:00
Gabor Juhos 86c6543259 ar71xx: make AR8327 LEDs working on the DB120 board
SVN-Revision: 32457
2012-06-19 10:44:17 +00:00
Gabor Juhos b934fa2f16 generic: ar8216: allow to configure AR8327 LEDs via platform data
SVN-Revision: 32456
2012-06-19 10:44:16 +00:00
Gabor Juhos f509a87f2d ar71xx: remove superfluous include of asm/mach-ath79/pci.h
SVN-Revision: 32455
2012-06-19 10:13:43 +00:00
Gabor Juhos 1a1121158f ar71xx: add a common function to configure USB power GPIOs
SVN-Revision: 32454
2012-06-19 10:13:41 +00:00
Gabor Juhos 27fea0b6d7 ar71xx: correctly detect NETGEAR WNDRMAC
This patch helps properly detect a WNDRMAC device. Before this
patch the model is detected as "NETGEAR ?????????N".

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

SVN-Revision: 32453
2012-06-19 10:13:38 +00:00
Gabor Juhos ee9bc123fb ar71xx: add USB LED support by default for WNDR3700/WNDR3800/WNDRMAC
This adds kmod-leds-wndr3700-usb package to a default build for
WNDR3700, WNDR3800 and WNDRMAC in order to support the green USB LED.

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

SVN-Revision: 32452
2012-06-19 10:13:37 +00:00
Gabor Juhos 833b4af816 ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA Router
This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router.
The platform is based on Ralink RT3052.
http://wiki.openwrt.org/toh/petatel/psr-680w

Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru>

SVN-Revision: 32450
2012-06-19 09:52:15 +00:00
Felix Fietkau 26cf21df02 ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de)
SVN-Revision: 32447
2012-06-19 00:22:04 +00:00
Felix Fietkau 5d364d0ca1 ar71xx: add support for reading the MAC address from OTP ROM on AR933x
SVN-Revision: 32446
2012-06-19 00:21:58 +00:00
Jo-Philipp Wich f06473f8ff optimize kernel config for kvm_guest
This patch enables few extra kernel options for the kvm_guest subtarget:
- Tickless kernel to avoid timer ticks in idle guests, reduces CPU usage
- Enable paravirtualization steal time support

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 32436
2012-06-18 23:36:50 +00:00
Jo-Philipp Wich cbac321164 remove inittab override
SVN-Revision: 32422
2012-06-18 11:50:37 +00:00
Florian Fainelli b89c81929e fix SPI message control handling for BCM6338/6348
BCM6338 and BCM6338 have their MSG_CONTROL register width of 8-bits instead of
16-bits. We were previously using a 16-bits write which corrupted the first
byte of the TX FIFO. Also the message type was always set to Full-duplex even
in the case of half-duplex messages.

SVN-Revision: 32409
2012-06-17 16:17:29 +00:00
Felix Fietkau 50958f5e03 kernel: replace the brcm47xx fuse workaround patches with a generic patch that applies to all mips targets
The dcache bug that it works around is a generic issue, not a brcm47xx cache quirk

SVN-Revision: 32395
2012-06-16 21:06:33 +00:00
Florian Fainelli b391548cf0 remove broken flags
Thanks to Nicolas Le Falher for testing on Bifferboard.

SVN-Revision: 32389
2012-06-16 16:45:28 +00:00
Jo-Philipp Wich e3663ff907 use ttyS0 @ 115200 baud as default for KVM guests
SVN-Revision: 32384
2012-06-15 12:59:49 +00:00
Luka Perkov 1c80d9f21d kirkwood: fix typo in uci-defaults/leds
Signed-off-by: Martin Mueller <mm@sig21.net>

SVN-Revision: 32343
2012-06-13 18:41:42 +00:00
Felix Fietkau dddf321b6e ar71xx: swap the PHY address of the ethernet port of TL-MR3040/TL-MR11U similar to TL-MR3020 to fix ethernet link detection
SVN-Revision: 32336
2012-06-13 12:54:22 +00:00
Jonas Gorski f2271efc4e bcm63xx: readd accidentially dropped ignore_oc in ehci driver
fixes overcurrent warning spam on 3.3 kernels for bcm63xx again.

SVN-Revision: 32221
2012-06-11 22:24:58 +00:00
Felix Fietkau 7cb42738e6 package/index: filter out the libc package from the index
SVN-Revision: 32187
2012-06-11 01:29:11 +00:00
Luka Perkov be5229f0ba kirkwood: ib62x0 fix reboot
SVN-Revision: 32131
2012-06-08 23:17:46 +00:00
Felix Fietkau 43b5706ef5 xburst: remove an obsolete CompareKernelPatchVer call
SVN-Revision: 32115
2012-06-07 16:32:44 +00:00
Florian Fainelli 6e5242952c fix 553-board_96348w3.patch patch wrt gpio-keys-polled
SVN-Revision: 32096
2012-06-06 20:58:45 +00:00
Felix Fietkau 624505df56 ar71xx: fix LZMA loader build regression from r32090 (thx, juhosg)
SVN-Revision: 32095
2012-06-06 19:37:49 +00:00
Felix Fietkau 8b46a72583 kernel: add a few more tracing related symbols
SVN-Revision: 32094
2012-06-06 18:04:00 +00:00
Felix Fietkau 73b8805e78 ar71xx: fix PHY setup on TL-MR3020 (fixes #11572)
SVN-Revision: 32093
2012-06-06 17:24:12 +00:00
Felix Fietkau dc9675282e ar71xx: add a helper function for setting up PHY4 swapping on ar933x
SVN-Revision: 32092
2012-06-06 17:24:09 +00:00
Felix Fietkau 072bed4760 target: do not make target/*/install depend on target/*/compile - removes one redundant kernel build dir call on target/install
SVN-Revision: 32091
2012-06-06 17:24:05 +00:00
Felix Fietkau 02ab0d3ef9 ar71xx: only build all loader images if the image builder is enabled - saves some time on make target/install
SVN-Revision: 32090
2012-06-06 17:24:01 +00:00
Florian Fainelli 4c25e42fa8 fix alarm led color for board 96348A-122
SVN-Revision: 32089
2012-06-06 16:07:46 +00:00
Florian Fainelli 2f63f097de add 96348w3 board (#10764)
SVN-Revision: 32088
2012-06-06 15:45:04 +00:00
Florian Fainelli 9d38989d1f update livebox board support (#8677)
Merge most fixes from #8677:

- add basic hardware detection of Livebox Blue 5g revisions
- register leds and gpio buttons
- fix boot address location
- properly parse mac addresses

Plus some more fixes:
- make board_livebox.c more in line with board_bcm963xx.c

SVN-Revision: 32087
2012-06-06 15:44:56 +00:00
Florian Fainelli c69a2cdfbb fix leds naming for all bcm63xx boards
SVN-Revision: 32086
2012-06-06 15:44:52 +00:00
Felix Fietkau ce1d4d7ee9 kernel: make tracing support configurable
SVN-Revision: 32085
2012-06-06 15:25:57 +00:00
Florian Fainelli 23fc737b9d backport upstream spi-bcm63xx fixes
* message pump conversion
* not using stopping state
* setting spi driver mode bits

SVN-Revision: 32078
2012-06-06 13:31:33 +00:00
Florian Fainelli 7b12e9e49c backport spi message queue infrastructure
SVN-Revision: 32077
2012-06-06 13:31:30 +00:00
Florian Fainelli 4112094dbb increase led number in patch 301-led_count.patch
So that board patches are only touching board-related code

SVN-Revision: 32076
2012-06-06 13:31:24 +00:00
John Crispin 95e69ac4f1 clean up generic image building
SVN-Revision: 32065
2012-06-05 17:49:42 +00:00
Florian Fainelli 9a61b249c5 fix board patches so that new boards are withing appropriate ifdef
Some new board definitions were added within the #ifdef CONFIG_CPU_6338
section while some other were added within #ifdef CONFIG_CPU_6345, fix this

SVN-Revision: 32060
2012-06-05 13:40:41 +00:00
Florian Fainelli 5ec2209734 refresh generic patches
SVN-Revision: 32059
2012-06-05 13:40:38 +00:00
Florian Fainelli 36c99bcc42 fix bisectability of patch 303-spi-board-info.patch
It uses spi_register_board_info() from linux/spi/spi.h but does not include it
explicitely.

SVN-Revision: 32058
2012-06-05 13:40:35 +00:00
John Crispin a4d96aae8d bump to 3.3.8
SVN-Revision: 32055
2012-06-05 06:57:51 +00:00
Luka Perkov 605012ad5d kirkwood: reorganize target
SVN-Revision: 32053
2012-06-05 00:43:56 +00:00
Luka Perkov 7f00e5ffc6 uboot-envtools: update to 2012.04.01
SVN-Revision: 32051
2012-06-04 21:55:49 +00:00
Jonas Gorski ffea8eb913 bcm63xx: fix ethernet on 96328avng and 963281TAN
The internal switch did not get registered.

SVN-Revision: 32041
2012-06-04 08:35:25 +00:00
John Crispin 2b4ef2eafa adds unset Kbuild symbol
SVN-Revision: 32026
2012-06-02 14:03:32 +00:00
Gabor Juhos f4b02b91ce malta: remove 3.2 patches
SVN-Revision: 32023
2012-06-02 12:06:28 +00:00
Gabor Juhos c0c60f7bd3 malta: use common kernel config
SVN-Revision: 32022
2012-06-02 12:06:26 +00:00
Gabor Juhos 9375e83586 xburst: add missing config symbol
SVN-Revision: 32021
2012-06-02 12:06:15 +00:00
John Crispin 76e4cd2a24 add $(SUBTARGET) to the filename if available
SVN-Revision: 32007
2012-05-30 18:04:15 +00:00
John Crispin 47ef62d1b8 adds patch to make Tantos (psb6970) switch buildable again
SVN-Revision: 32006
2012-05-30 17:41:28 +00:00
Jonas Gorski 3fc76fb781 bcm63xx: build images for 6328 reference boards with various flash sizes
Build images for 96328avng and 963281TAN (untested) for three different
flash sizes: 4MB, 8MB, and 16MB.

Known issues:
 * Button setup unknown, thus no fail-safe available.
 * All other BCM6328 and BCM63XX issues

SVN-Revision: 32004
2012-05-30 10:27:46 +00:00
Jonas Gorski c454ba3657 bcm63xx: readd accidentially dropped network config for SPW303V
SVN-Revision: 32003
2012-05-30 10:27:42 +00:00
Gabor Juhos 9e02593b70 generic: ar8216: add revision specific PHY fixups for AR8327
SVN-Revision: 32000
2012-05-29 16:39:27 +00:00
Gabor Juhos 0d241e6670 generic: ar8216: replace chip_type field with chip_{ver,rev} in ar8216_priv
SVN-Revision: 31999
2012-05-29 16:39:26 +00:00
Gabor Juhos b2fce19a70 generic: ar8216: add chip_is_ar8{216,236,316,327} helpers
SVN-Revision: 31998
2012-05-29 16:39:24 +00:00
Gabor Juhos cd7ab1d30b ar71xx: add default LED setup for the DB120 board
SVN-Revision: 31997
2012-05-29 16:39:23 +00:00
Gabor Juhos 29a579e43a cns21xx: use the generic uci-default functions for initial LED setup
SVN-Revision: 31996
2012-05-29 16:39:22 +00:00
Gabor Juhos ff74305623 lantiq: use the generic uci-default functions for initial LED setup
SVN-Revision: 31995
2012-05-29 16:39:21 +00:00
Gabor Juhos c81c6516de kirkwood: use the generic uci-default functions for initial LED setup
SVN-Revision: 31994
2012-05-29 16:39:20 +00:00
Gabor Juhos ffbb4f88a9 ramips: use the generic uci-default functions for initial LED setup
SVN-Revision: 31993
2012-05-29 16:39:18 +00:00
Gabor Juhos 4e40bdc190 ar71xx: use the generic uci-default functions for initial LED setup
SVN-Revision: 31992
2012-05-29 16:39:17 +00:00
Gabor Juhos ba3ad24514 kirkwood: use uci-defaults to configure different boards
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31990
2012-05-29 16:39:15 +00:00
Gabor Juhos c71838faa1 ramips: WAN LED for D-Link DIR-300-B1
Add led devices for D-Link DIR-300-B1 WAN LED.

Note that the GPIO state is also ANDed with the esw switch port 4
LED state, which is why I've set the amber LED to default-on.

Closes: https://dev.openwrt.org/ticket/11326

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

[ juhosg:
- fix comment style in mach-dir-300-revb.c,
- remove the PPP specific LED setup, not everyone uses a PPP connection
  on the WAN interface]

SVN-Revision: 31989
2012-05-29 16:39:03 +00:00
Felix Fietkau a9cd8446f3 ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality
SVN-Revision: 31956
2012-05-28 20:39:50 +00:00
Felix Fietkau 367e4b3994 ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack
SVN-Revision: 31934
2012-05-28 02:55:59 +00:00
Felix Fietkau 8039a1bbb2 ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x
SVN-Revision: 31925
2012-05-27 21:02:41 +00:00
Felix Fietkau f638414fdc kernel: fix suppressing -s for linking modules when profiling is enabled
SVN-Revision: 31924
2012-05-27 21:02:36 +00:00
Gabor Juhos 8865f0923e ar71xx: fix TL-WR1041 image size
SVN-Revision: 31923
2012-05-27 17:21:47 +00:00
Gabor Juhos 1c552ba8e5 ramips: rt3883: add device registration code for the SPI controller
SVN-Revision: 31922
2012-05-27 17:10:00 +00:00
Gabor Juhos 9c241983fc ramips: allow to use the SPI driver on RT3662/RT3883
SVN-Revision: 31921
2012-05-27 17:09:58 +00:00
Gabor Juhos 78a750dcce ramips: rt3883: fix GPIO reservation for the SPI pins
SVN-Revision: 31920
2012-05-27 17:09:56 +00:00
Gabor Juhos 0622fdd82c ramips: rt305x: remove superfluous controller_data assignment
SVN-Revision: 31919
2012-05-27 17:09:52 +00:00
Gabor Juhos 7f5bec0642 ramips: make rt2x00 firmware extraction quiet
SVN-Revision: 31918
2012-05-27 17:09:50 +00:00
Gabor Juhos 86dad96fd0 generic: rtl8367: rename a misnamed variable
SVN-Revision: 31917
2012-05-27 17:09:47 +00:00
Gabor Juhos 705d31203c generic: rtl8366_smi: remove duplicated spinlock initialization
SVN-Revision: 31916
2012-05-27 17:09:45 +00:00
Gabor Juhos 9217115687 generic: rtl8366_smi: rename debugfs Kconfig symbol
SVN-Revision: 31915
2012-05-27 17:09:43 +00:00
Gabor Juhos 466ef30173 generic: rtl8367: allow to use VLANs > 31
SVN-Revision: 31914
2012-05-27 17:09:41 +00:00
John Crispin f567980d38 move files-3.3 -> files
SVN-Revision: 31912
2012-05-27 16:13:02 +00:00
John Crispin 8002770520 3.2 R.I.P.
SVN-Revision: 31911
2012-05-27 16:12:59 +00:00
John Crispin 81ddc886e1 dgn3500 support with eeprom loading from sysfs
WIFI eeprom:
As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules.  I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data.

SPI flash:
It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above.
I've kept the original mtd partitioning that Netgear uses.

Buttons/LED:
Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working.
The green wifi led is connected to an unknown atheros gpio.

Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com>

SVN-Revision: 31910
2012-05-27 16:02:22 +00:00
John Crispin 6e8fe84472 fixes zyxel p2601hnfx
moves the linux partition, removes the config partition and the
buttons settings have small adjustments.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31909
2012-05-27 16:02:20 +00:00
John Crispin 3f2f50c681 Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31908
2012-05-27 16:02:16 +00:00
Felix Fietkau 51bc47ce7c kernel: properly pad the allocated headroom in skb_cow to NET_SKB_PAD
SVN-Revision: 31906
2012-05-27 15:16:37 +00:00
Gabor Juhos 0b8c1c8dfb linux/3.2: R.I.P.
SVN-Revision: 31905
2012-05-27 15:01:37 +00:00
Gabor Juhos 20ba6d90e3 xburst: remove support for old kernels
SVN-Revision: 31904
2012-05-27 15:01:35 +00:00
Gabor Juhos d043cb2c34 xburst: switch to 3.3 and add broken flag
SVN-Revision: 31903
2012-05-27 15:01:33 +00:00
Gabor Juhos 9a26e9f843 xburst: add support for 3.3
SVN-Revision: 31902
2012-05-27 15:01:32 +00:00
Gabor Juhos 9dd7a6d9e2 ppc44x: remove 3.2 support
SVN-Revision: 31901
2012-05-27 15:01:30 +00:00
Gabor Juhos 05d74942b1 ppx44x: switch to 3.3 and add broken flag
SVN-Revision: 31900
2012-05-27 15:01:28 +00:00
Gabor Juhos 9300e0496c ppc44x: add support for 3.3
Compile tested only.

SVN-Revision: 31899
2012-05-27 15:01:27 +00:00