Jonas Gorski
a01568fbd3
brcm63xx: remove broken DSP platform device code
...
There is no driver and it crashes the kernel, so just remove it.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-12-30 13:22:13 +01:00
Jonas Gorski
d09561f73d
brcm63xx: fix bcm6348 pinmux group selection
...
The mask/shift computation used the pin group number instead of the pin
number, resulting in always modifying group 4 when applying muxes, so
fix it to consistently use the pin number.
Fixes: 0755c2d117
("brcm63xx: add pinctrl support")
Reported-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-12-30 13:22:13 +01:00
Daniel Gonzalez Cabanelas
33bff49a31
brcm63xx: VH4032N: add the SPROM fixups
...
Add the SPROM fixups for the onboard BCM43222 wifi on the Observa
VH4032N
Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
2018-12-30 13:22:13 +01:00
Jonas Gorski
6d6127e537
brcm63xx: fix gpio hogs on gpio/pinctrl nodes
...
Work around a chicken/egg issue in registration of dual gpio/pinctrl
nodes.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-12-30 13:21:42 +01:00
Jonas Gorski
1789202ed4
brcm63xx: rename switch core reset patch to 0xx as it has been accepted
...
The core reset fix was accepted upstream, so move it to its right place.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-12-30 13:20:57 +01:00
Jonas Gorski
e08ef42b24
brcm63xx: fix ethernet switch core reset mask for BCM6368
...
The reset mask for the bcm6368 switch core was left at 0 due to a copy &
paste error. Fix this by setting it to the correct value.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-12-11 13:11:51 +01:00
Koen Vandeputte
c764b2b531
kernel: bump 4.14 to 4.14.79
...
Refreshed all patches.
Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6, x86_64
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-11-05 16:00:00 +01:00
Jonas Gorski
8cb8d70fea
brcm63xx: copy SR102 support patch to 4.14 as well
...
It seems to have been missed when the patch was accepted.
Fixes: d591260407
("brcm63xx: initial support for Sky SR102 router")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-08-02 08:43:52 +02:00
Stijn Tintel
22b9f99b87
kernel: bump 4.14 to 4.14.59
...
Drop patch that was superseded upstream:
ramips/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch
Drop upstreamed patches:
- apm821xx/020-0001-crypto-crypto4xx-remove-bad-list_del.patch
- apm821xx/020-0011-crypto-crypto4xx-fix-crypto4xx_build_pdr-crypto4xx_b.patch
- ath79/0011-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch
- brcm63xx/001-4.15-08-bcm63xx_enet-correct-clock-usage.patch
- brcm63xx/001-4.15-09-bcm63xx_enet-do-not-write-to-random-DMA-channel-on-B.patch
- generic/backport/080-net-convert-sock.sk_wmem_alloc-from-atomic_t-to-refc.patch
- generic/pending/170-usb-dwc2-Fix-DMA-alignment-to-start-at-allocated-boun.patch
- generic/pending/900-gen_stats-fix-netlink-stats-padding.patch
In 4.14.55, a patch was introduced that breaks ext4 images in some
cases. The newly introduced patch
backport-4.14/500-ext4-fix-check-to-prevent-initializing-reserved-inod.patch
addresses this breakage.
Fixes the following CVEs:
- CVE-2018-10876
- CVE-2018-10877
- CVE-2018-10879
- CVE-2018-10880
- CVE-2018-10881
- CVE-2018-10882
- CVE-2018-10883
Compile-tested: ath79, octeon, x86/64
Runtime-tested: ath79, octeon, x86/64
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-07-31 05:11:07 +03:00
Jonas Gorski
abb28bec25
brcm63xx: drop own implementation of DT partitions in favour of upstream
...
The binding works the same, so we can just drop the revert and the patch.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-07-29 15:38:33 +02:00
Rafał Miłecki
2a598bbaa3
kernel: backport mtd support for subpartitions in DT
...
This is a new & warm feature that allows nesting partiitons in DT and
mixing their types (e.g. static vs. dynamic). It's very useful for
boards that have most partitions static but some of them require extra
parsing (e.g. a "firmware" partition).
It's required to successfully backport support for new devices using
that new syntax in their DT files.
Since brcm63xx has a custom alternative patch the upstream one is being
reverted for it. The plan is to make brcm63xx use the upstream
implementation.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-07-27 22:16:24 +02:00
Koen Vandeputte
e2aa0c3f8b
kernel: bump 4.14 to 4.14.41
...
Refreshed all patches
Dropped upstreamed patches:
522-PCI-aardvark-fix-logic-in-PCI-configuration-read-write-functions.patch
523-PCI-aardvark-set-PIO_ADDR_LS-correctly-in-advk_pcie_rd_conf.patch
525-PCI-aardvark-use-isr1-instead-of-isr0-interrupt-in-legacy-irq-mode.patch
527-PCI-aardvark-fix-PCIe-max-read-request-size-setting.patch
updated patches:
524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch
030-USB-serial-option-fix-dwm-158-3g-modem-interface.patch
Added new ARM64 symbol: CONFIG_ARM64_ERRATUM_1024718
Compile-tested on: cns3xxx, imx6, mvebu (arm64), x86_64
Runtime-tested on: cns3xxx, imx6, x86_64
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-05-18 09:10:46 +02:00
Stijn Segers
9899ffcfd3
kernel: bump 4.14 to 4.14.27
...
* Refreshed patches.
* Deleted 812-pci-dwc-fix-enumeration.patch (was accepted upstream)
Compile-tested: ramips/mt7621, x86/64
Run-tested: ramips/mt7621, x86/64
Signed-off-by: Stijn Segers <foss@volatilesystems.org>
2018-03-17 22:15:38 +01:00
Jonas Gorski
1ba38f6100
brcm63xx: add kernel 4.14 support
...
Add support for kernel 4.14. Increases compressed kernel size by ~64k
compared to 4.9.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-02-11 23:15:05 +01:00