de18353622
ramips: nuke clocksource init patch
...
SVN-Revision: 20802
2010-04-11 17:47:30 +00:00
b4bb5ebfaa
ramips: generate sysupgrade images for the rt305x devices
...
SVN-Revision: 20801
2010-04-11 17:47:28 +00:00
7581054e93
ramips: add sysupgrade support
...
SVN-Revision: 20800
2010-04-11 17:47:25 +00:00
09aec474af
ramips: add diag support
...
SVN-Revision: 20799
2010-04-11 17:47:23 +00:00
2872bade69
ramips: enable image commandline hack and cmdline partition parsing
...
SVN-Revision: 20798
2010-04-11 17:47:20 +00:00
af05b16c98
ramips: add default profiles
...
SVN-Revision: 20797
2010-04-11 17:47:17 +00:00
d1031cd861
time.c: Timer enable registers are only 8bit width.
...
SVN-Revision: 20796
2010-04-11 16:24:06 +00:00
15e8d2e0b7
add net5501 support
...
This patch brings up the net5501 platform.
Note that the x86/ target included support for all x86/ class
processors. That's not technically correct. This should be constrained
only to the "generic" subtarget. Every x86-class target that isn't
generic should be able to select only the optimizations/capabilities
applicable to that architectural variant.
It's also assumed that all x86 processors have keyboard & mouse ports,
ISA, DMI, ACPI... the embedded ones typically don't. Again, moving
that to the generic subtarget.
Fortunately, this was a fairly benign tweak.
The net5501 board includes the following logic:
Geode/LX processor
CS5535 super-I/O chip
PC87360 sensor chip
Via Rhine Ethernet controllers
Via Sata controllers
USB, LEDS, I2C
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
SVN-Revision: 20794
2010-04-11 12:36:55 +00:00
62b96185c3
ixp4xx: add Titan Wireless TW-266-2 support (thanks juhosg & florian)
...
SVN-Revision: 20793
2010-04-11 09:03:10 +00:00
3c48fb6ff9
ixp4xx: add 2.6.33 support
...
SVN-Revision: 20792
2010-04-11 09:01:36 +00:00
f4d71f5e81
create two endian-specific subtargets, as malta can run both
...
SVN-Revision: 20790
2010-04-10 21:02:51 +00:00
b4d0b6cbb3
adss 2.6.33 kernel patches, not defult yet as linux-atm breaks on 2.6.33
...
SVN-Revision: 20789
2010-04-10 20:11:28 +00:00
6d12bc20ce
remove 2.6.32 files, out of sync and going to be replaced differently
...
SVN-Revision: 20787
2010-04-10 18:44:44 +00:00
1d8823ae61
Add mx2 target with very basic support for the vp6500 voip phone
...
SVN-Revision: 20786
2010-04-10 18:37:34 +00:00
1633dd6b6c
ar71xx: add a profile for PB92
...
SVN-Revision: 20778
2010-04-10 16:50:20 +00:00
8f25fb6086
add script to fixup the wireless mac ( #7102 )
...
SVN-Revision: 20775
2010-04-10 14:29:01 +00:00
3491026cbb
Generic: Clean up output of AR8216 driver.
...
This patch is rather a cosmetic patch. It fixes the following issues:
* Demote the unknown device message to debug level to not spam
the log.
* Fix the version print of the unknown device message.
* Output the 'attach' message only when attaching as switch driver,
not when attaching as phy driver.
* Correctly return NET_RX_DROP when dropping packets.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
Cc: bacfire@openwrt.org
SVN-Revision: 20773
2010-04-10 11:34:11 +00:00
222390bafc
refresh patches
...
SVN-Revision: 20767
2010-04-09 19:26:57 +00:00
b87e590b24
do not overwrite ENET_CTL_REG, fixes ethernet on bcm6338
...
SVN-Revision: 20765
2010-04-09 18:43:36 +00:00
6139571932
ar71xx: nuke clocksource init patches, it is not required since 2.6.27
...
SVN-Revision: 20764
2010-04-09 13:33:03 +00:00
33bcbab6a4
x86: generic: fix soekris support ( closes #7081 )
...
SVN-Revision: 20757
2010-04-09 11:31:19 +00:00
dd7304ec6d
ar71xx: update phy masks for the Planex boards
...
This avoids probing of the AR8216 chip on the eth0 interface.
Cc: backfire@openwrt.org
SVN-Revision: 20754
2010-04-09 08:40:14 +00:00
72d4353728
generic: make chip detection more reliable in the AR8216 driver
...
Fixes broken ethernet on the Planex MZK-W04NU/W300NH boards.
Cc: bacfire@openwrt.org
SVN-Revision: 20753
2010-04-09 08:40:12 +00:00
d6c0363884
ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards
...
Cc: backfire@openwrt.org
SVN-Revision: 20752
2010-04-09 08:40:09 +00:00
4c29a2c263
ar71xx: ag71xx: avoid unalinged accesses when using the phy specific receive functions
...
Cc: backfire@openwrt.org
SVN-Revision: 20751
2010-04-09 08:40:06 +00:00
4a28844d80
ar71xx: ag71xx: call the phy driver's netif_receive_skb()
...
Ag71xx needs to call the phy's netif_receive_skb() to allow phy drivers
to mangle rx packets. This patch fixes it.
This fixes the header mangling of the AR8216 driver.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
Cc:backfire@openwrt.org
SVN-Revision: 20750
2010-04-09 08:38:46 +00:00
722e75f066
fix kexec for mips, patch from Adrian Byszuk ( #7115 )
...
SVN-Revision: 20745
2010-04-08 07:53:14 +00:00
44810702d2
fix failsafe ip deconfig on AR23xx devices without ADM or Marvell switch
...
SVN-Revision: 20733
2010-04-06 22:46:15 +00:00
df463abb18
ar71xx: fix ethernet on final pb92 board (previous value was based on a preliminary version)
...
SVN-Revision: 20725
2010-04-06 00:12:50 +00:00
23bebe33a7
Add support for the ar8316 switch. This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices.
...
[PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g.
Add the ar8216 driver to the ar71xx target, and add network
configurations for the RouterStation Pro and the RouterBoard RB-450G.
SVN-Revision: 20722
2010-04-05 23:03:16 +00:00
22e3bd0d8b
add kernel support for iptables comment match
...
SVN-Revision: 20720
2010-04-05 22:38:40 +00:00
83bf10cb3f
target/rdc: revert [20653], the proper fix for #7005 is in [20712]
...
SVN-Revision: 20714
2010-04-05 02:38:59 +00:00
ddb677e13d
ixp4xx: add back the patch for avoiding dma bounce buffers for network buffers, which was lost on the kernel upgrade to 2.6.32. fixes ath9k and improves other drivers' performance on boards with >64M ram
...
SVN-Revision: 20708
2010-04-04 17:43:13 +00:00
1fc7da0306
sysupgrade: fix typo in platform_do_upgrade() on x86 ( closes : #7068 ), thanks to acinonyx
...
SVN-Revision: 20703
2010-04-04 15:47:26 +00:00
f8275576d9
jzcodec: Only support 16bit formats for now
...
SVN-Revision: 20701
2010-04-04 15:39:15 +00:00
e60b9b9b35
do not disable netfilter support for xburst target (some packages require netfilter support)
...
SVN-Revision: 20698
2010-04-04 13:01:50 +00:00
c874513cfa
ar71xx: fix broken LAN ports on the boards with AR8216 switch ( closes #7024 )
...
* cc: backfire@openwrt.org
SVN-Revision: 20673
2010-04-03 13:59:08 +00:00
e3a9d80e8f
do not set CONFIG_NET_DEV_OPS ( #7005 )
...
SVN-Revision: 20653
2010-04-02 10:34:40 +00:00
2a4fb82289
flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore.
...
SVN-Revision: 20652
2010-04-01 21:20:43 +00:00
bbe4a57177
brcm-2.4: fix commit r18413 "128MB ram problem"
...
This was missing in commit r20072
SVN-Revision: 20651
2010-04-01 17:27:59 +00:00
d3b9b93dd3
add a subtarget and drivers for the Intel Tolapai SoC
...
SVN-Revision: 20648
2010-04-01 12:05:27 +00:00
bfc37a1a19
improve extract code
...
SVN-Revision: 20641
2010-03-31 21:12:02 +00:00
0abc7e6d53
ramips: add wpad-mini to the default packages
...
SVN-Revision: 20632
2010-03-31 09:58:33 +00:00
a423c3abee
ramips: annotate device register function prototypes with __init
...
SVN-Revision: 20627
2010-03-31 08:40:28 +00:00
a9f313edea
ramips: register wifi device for the RT2880 based boards
...
SVN-Revision: 20625
2010-03-31 08:40:23 +00:00
9f3d673dbc
ramips: add wifi device for the RT2880 as well
...
SVN-Revision: 20624
2010-03-31 08:40:20 +00:00
1c25cfcde0
ramips: register wifi device on the rt305x based boards
...
SVN-Revision: 20616
2010-03-30 21:24:10 +00:00
ce2ac05602
ramips: sync kernel config
...
SVN-Revision: 20614
2010-03-30 21:24:05 +00:00
60ca90e08b
prepare kernel for voip
...
SVN-Revision: 20613
2010-03-30 21:06:27 +00:00
6f4052abe0
The ralink rt305x board has a wireless card that can be used with the rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
...
SVN-Revision: 20599
2010-03-30 12:04:05 +00:00
Gabor Juhos
Lars-Peter Clausen
Florian Fainelli
Alexandros C. Couloumbis
John Crispin
Felix Fietkau
Jo-Philipp Wich
Nicolas Thill
Mirko Vogt
Hauke Mehrtens
Imre Kaloz