Commit Graph

503 Commits (d7ebbd0ac7eb6cb5ab017ed3e221e51e15d673e2)

Author SHA1 Message Date
Felix Fietkau 15b4975925 hostapd: add support for auto-channel selection
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38915
2013-11-25 15:43:30 +00:00
Felix Fietkau 1d75f7506d hostapd: update to version 2013-11-20
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38914
2013-11-25 15:43:15 +00:00
John Crispin cba772f5bc pppd: Place plugin-specific options after `plugin name`.
Before this patch, if we specify a plugin specific option through
`pppd_options` in /etc/config/network, e.g. `rp_pppoe_verbose 1`, pppd
would quit with the following error in log.

    Wed Oct  9 09:42:58 2013 daemon.notice netifd: GORG (1689): /usr/sbin/pppd: unrecognized option 'rp_pppoe_verbose'
    Wed Oct  9 09:42:58 2013 daemon.err pppd[1689]: unrecognized option 'rp_pppoe_verbose'
    Wed Oct  9 09:42:58 2013 daemon.notice netifd: GORG (1689): pppd version 2.4.5
    Wed Oct  9 09:42:58 2013 daemon.notice netifd: GORG (1689): Usage: /usr/sbin/pppd [ options ], where options are:

This is due to the requirement that function add_option() should be
called by the plugin_init() function first before pppd can parse those
options.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 38911
2013-11-25 14:09:16 +00:00
Felix Fietkau 5143157af8 uhttpd: update to the latest version, fixes crashes in the ubus plugin
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38888
2013-11-21 21:52:24 +00:00
Felix Fietkau cd1c8d463f hostapd: remove random pool support - the entropy it gathers is questionable and we have better entropy sources on common platforms now
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38852
2013-11-18 13:54:26 +00:00
Jo-Philipp Wich bc9043cc53 firewall: optimize DNAT rules and skip invalid rules and redirects (#14485)
- instead of writing one (or more) ACCEPT rules in the filter table
	  for each redirect install a global ctstate DNAT accept rule per zone

	- discard rules and redirects which have invalid options set instead
	  of silently skipping the invalid values

SVN-Revision: 38849
2013-11-18 11:59:27 +00:00
Steven Barth b5a4fb1c95 6rd: Clear correct IPv6 address bits in 6rdcalc
The correct bits are now cleared in the IPv6 address as the shift
value to the correct byte in the IPv6 address was wrong. Depending
on the stack values this could result in a hanging 6rdcalc program
due to an endless loop.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

SVN-Revision: 38818
2013-11-16 09:18:14 +00:00
John Crispin a9cfb4b827 procd: fixup 2 wrong option types
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38789
2013-11-13 11:07:24 +00:00
John Crispin 1f93857092 procd: convert services to the new validation api
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38787
2013-11-13 10:49:41 +00:00
Felix Fietkau 37756a97a0 hostapd: remove #ifdef MULTICALL around ap+sta support code (to support separately installed supplicant+hostapd)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38782
2013-11-12 22:11:14 +00:00
Jo-Philipp Wich 7ad5350dfb Add patch to fix ipset timeout setting problem
Fixes #14325

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>

SVN-Revision: 38779
2013-11-12 11:01:11 +00:00
Jo-Philipp Wich c9bc0e12a9 Update ipset to version 6.20.1
Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>

SVN-Revision: 38778
2013-11-12 11:00:49 +00:00
Hauke Mehrtens 20d64e929f iwinfo: don't report associations for broadcom wds interfaces
The associations list for Broadcom WDS interfaces are duplicate to those
reported by the corresponding AP interface; so there is no need to report
them again.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38746
2013-11-11 21:54:55 +00:00
Hauke Mehrtens e3a5401fb2 iwinfo: fix hwmodelist reporting for broadcom wl
Modify the hwmodelist reporting for broadcom devices to include
proper reporting of 802.11n support.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38745
2013-11-11 21:54:25 +00:00
Jo-Philipp Wich 8a1d77efed uhttpd: return after processing -d switch, only set ubus prefix if not already defined
SVN-Revision: 38743
2013-11-11 19:14:01 +00:00
John Crispin 989783255e uhttp: add ubus.default
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38741
2013-11-11 18:12:26 +00:00
John Crispin f48568af8e pppd: don't call modprobe at all from pppoatm
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38737
2013-11-11 13:40:28 +00:00
John Crispin 3cc0f479dc uhttp: make the service auto respawn if it crashes
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38724
2013-11-11 12:19:02 +00:00
John Crispin 9f3b161a57 uhttp: make sure that the ubus module is loaded when when installed
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38723
2013-11-11 12:18:58 +00:00
Felix Fietkau e78e720a6f netifd: remove connect_time from /var/state, it is unused
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38704
2013-11-10 10:01:33 +00:00
John Crispin edf6236838 lantiq: fix vdsl-app dependency
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38666
2013-11-07 12:45:39 +00:00
Jo-Philipp Wich 5db9587b5f dnsmasq: fix backward compatibility with existing configs
Changeset r36943 ("dnsmasq: use host-record instead of address") removed
the automatic domain expansion for config domain sections, this breaks
existing setups and alters the old behaviour in unexpected ways, therfore
restore behaviour of the current stable release.

Additionally handle fully qualified hostnames properly when setting up the
own hostrecord by stripping the local domain part form the given name
instead of unconditionally appending it, so that "example.lan" results
in "example example.lan" and not "example.lan example.lan.lan".

SVN-Revision: 38648
2013-11-04 22:40:56 +00:00
Felix Fietkau 2c84ff42f7 openvpn: clean up and fix the init script
- clean up duplication of procd instance handling code
- using --cd *after* --config is rather pointless
- to be able to log errors properly, --syslog needs to be passed before --config
- tell procd about the generated or referenced config file instead of
  the uci file. this avoids having to restart all instances if only one
  of them changes.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38632
2013-10-31 17:36:24 +00:00
Felix Fietkau e16f104a6f netifd: update to the latest version, fixes regression in proto-shell scripts (#14400, #14402)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38627
2013-10-31 11:22:01 +00:00
Felix Fietkau 22890e6382 netifd: update to latest version, adds fixes and some preparation for supporting wifi devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38606
2013-10-30 11:25:01 +00:00
Steven Barth dfa9ca772b odhcp6c: Multiple improvements and fixes
* Various RFC compliance fixes (thanks to Hans Dedecker)
* Fix RA spam filter logic causing ipv6 connection issues
* Fix parameters -F and -P being order dependent

SVN-Revision: 38577
2013-10-29 13:23:28 +00:00
Steven Barth d8d0e2c536 odhcp6c: filter similar RAs spammed by some ISPs
SVN-Revision: 38505
2013-10-23 10:31:06 +00:00
Steven Barth bb699867e0 firewall: Improve ubus support
* Use network.interface dump call instead of individual status calls
  to reduce overall netifd lookups and invokes to 1 per fw3 process.

* Allow protocol handlers to assign a firewall zone for an interface
  in the data section to allow for dynamic firewall zone assignment.

SVN-Revision: 38504
2013-10-23 10:25:26 +00:00
Steven Barth a54f104701 odhcpd: fix cleaning of configuration on reload
SVN-Revision: 38503
2013-10-23 09:30:28 +00:00
Steven Barth 1ff15bfe83 6relayd: reduce fallout of RA spamming a bit
SVN-Revision: 38488
2013-10-21 10:26:57 +00:00
Steven Barth 91b173d231 netifd: Fix ifupdate events
SVN-Revision: 38458
2013-10-19 11:01:25 +00:00
Steven Barth 579e2df8c5 odhcpd: various bugfixes
SVN-Revision: 38454
2013-10-18 13:39:48 +00:00
Steven Barth c3bcdd59de netifd: various improvements
* Add ubus methods for global interface status
* Add ubus function to create nested interfaces
* Add protocol update notifications and hotplug legacy calls
* Fix: key to data elements point at wrong memory area
* Add support for source-restricted routes
* Add option "delegate" to toggle prefix delegation
* Reevaluate target routes also on interface update

SVN-Revision: 38453
2013-10-18 13:39:43 +00:00
Jo-Philipp Wich 4f1e282238 wpa_supplicant: fix beacon_int configuration option
wpa_supplicant expects beacon_int instead of beacon_interval in its config
file.

Signed-off-by: Bruno Randolf <br1@einfach.org>

SVN-Revision: 38451
2013-10-18 11:47:47 +00:00
Jo-Philipp Wich 6da1c9d3ea iw: add patch to support 802.11j frequencies
A similar change was recently merged in iw commit
58b46da26ab9b5ff31c7033e175351eb1301d9af

Signed-off-by: Bruno Randolf <br1@einfach.org>

SVN-Revision: 38449
2013-10-18 11:43:02 +00:00
Jo-Philipp Wich c8e0c28c15 iwinfo: make 'type' visible in wrapped iwinfo
There are several cases within 'luci' that attempt to access the interface
'type' from within the 'type' specific meta tables; however, 'type' is not
currently available there.  Replicate the common metadata in the 'type'
specific meta tables.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38448
2013-10-18 11:42:43 +00:00
Steven Barth 56bc536713 netifd: rename customopts to sendopts for consistency
SVN-Revision: 38437
2013-10-17 13:12:06 +00:00
Steven Barth c759b49a4f Added 'customopts' dhcp protocol option, which is an array passed along to udhcpc as series of -x options.
Signed-off-by: Markus Stenberg <markus.stenberg@iki.fi>

SVN-Revision: 38436
2013-10-17 12:55:40 +00:00
Steven Barth 7e13c80b3d odhcp6c: fix parsing of IA_PD adverts
SVN-Revision: 38433
2013-10-17 07:19:32 +00:00
Steven Barth 76dfe21a27 odhcpd: add new experimental dhcp-server
SVN-Revision: 38428
2013-10-16 09:03:55 +00:00
Jo-Philipp Wich fce216ac7e dropbear: add dropbear.nl mirror, provided by dropbear maintainer
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>

SVN-Revision: 38413
2013-10-15 13:10:32 +00:00
Luka Perkov 5dc102ce04 openvpn: make comp_lzo a parameter
Possible parameters are yes, no and adaptive. See manpage for more information.

Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de>

SVN-Revision: 38412
2013-10-15 12:42:58 +00:00
Jo-Philipp Wich eda0fc3c6c openvpn-easy-rsa: restore essential patch to make it actually work on the target (#14324)
SVN-Revision: 38411
2013-10-15 12:23:21 +00:00
Steven Barth 156ea733d4 odhcp6c: various fixes
* Make SOL_MAX_RT configurable and default back to 120s
* Prefer servers with bigger prefixes (allows to use Comcast /60)
* Don't hang indefinitely if DHCPv6 REQUEST is not answered

Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 38393
2013-10-14 18:53:02 +00:00
Hauke Mehrtens 232a654833 iputils: do not compile this for brcm47xx with -O2
ping is now working for me with -Os on brcm47xx.
This revert r26278.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38389
2013-10-13 22:51:33 +00:00
Hauke Mehrtens e1523b5504 switch: remove old switch driver
The switch driver is not used by brcm47xx any more and can be removed,
instead of this switch driver b53 is used now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38387
2013-10-13 22:15:31 +00:00
Hauke Mehrtens af32e63bae lantiq: add some missing PKG_SOURCE_URLs
These URLs where missing and causes build failures.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38376
2013-10-12 22:33:55 +00:00
Jo-Philipp Wich 78f69b66d4 dnsmasq: add option broadcast to host sections
There are certain consumer devices which are outliers in protocol conformance.
An example is Samsung bluray players, which require broadcast DHCP responses
(on Ethernet only, strangely not on Wifi).

By specifying:

config host
	...
	option broadcast 1

this will enable the response to be sent as an Ethernet broadcast and not as
a unicast.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 38365
2013-10-11 18:33:15 +00:00
Jo-Philipp Wich db3013852a firewall: small improvements in nat reflection
- do not insert duplicate rules when setting up reflection to a zone containing multiple interfaces
	- set up reflection for any protocol, not just TCP and UDP

SVN-Revision: 38361
2013-10-10 18:15:10 +00:00
Jo-Philipp Wich 5380fa27e9 ppp: correct module loaded check in proto_pptp_setup
proto_pptp_setup is responsible for loading the required modules to establish
a pptp connection to a foreign peer. The function checks whether all required
modules are already loaded, before actually loading them.

It seems that the filter being used to accomplish this, is not restrictive
enough in some cases. For instance when pptp nat helper modules are present on
a system, and already loaded before a pptp connection is enabled. Then the
search filter (possibly) returns the following for module=pptp, where actually
no matches are expected, resulting in the pptp.ko module not being loaded,
thereby failing to establish the pptp connection.

# module="pptp" ; grep "$module" /proc/modules
nf_nat_pptp 1312 0 - Live 0x86ce7000
nf_conntrack_pptp 3072 1 nf_nat_pptp, Live 0x86cb9000
nf_nat_proto_gre 784 1 nf_nat_pptp, Live 0x86cba000
nf_conntrack_proto_gre 2368 1 nf_conntrack_pptp, Live 0x86cbf000
nf_nat 9792 13 nf_nat_rtsp,nf_nat_tftp,nf_nat_sip,nf_nat_pptp,nf_nat_h323,nf_nat_proto_gre,nf_nat_amanda,nf_nat_irc,nf_nat_ftp,ipt_REDIRECT,ipt_NETMAP,ipt_MASQUERADE,iptable_nat, Live 0x86ca8000
nf_conntrack 37264 31 nf_nat_rtsp,nf_conntrack_rtsp,nf_nat_tftp,nf_conntrack_tftp,nf_nat_snmp_basic,nf_conntrack_snmp,nf_nat_sip,nf_conntrack_sip,nf_nat_pptp,nf_conntrack_pptp,nf_nat_h323,nf_conntrack_h323,nf_conntrack_proto_gre,nf_nat_amanda,nf_conntrack_amanda,nf_conntrack_broadcast,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_conntrack_ftp,ipt_MASQUERADE,iptable_nat,nf_nat,xt_helper,xt_connmark,xt_connbytes,xt_conntrack,xt_CT,xt_NOTRACK,xt_state,nf_conntrack_ipv4, Live 0x86c90000

The search filter can be made more accurate/restrictive, by requiring the
occurance of the exact name of the module at the beginning of a line in
/proc/modules.

# module="pptp" ; grep "^$module " /proc/modules
pptp 13296 2 - Live 0x86e80000

Signed-off-by: Tijs Van Buggenhout <tvb@able.be>

SVN-Revision: 38358
2013-10-10 14:58:12 +00:00