Commit Graph

38 Commits (d6554bf66a4f055e9a02ce4fccf0162122ab8b81)

Author SHA1 Message Date
John Crispin eddd7f5773 ramips: Update ARC Freestation profile
These devices are actually built around the 8devices Carambola dev board.

ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are
supported with this image, see "ARCFlex Firmware Downloads":
http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History

Funnily enough if present the external USB wlan ends up being wlan-0, with the
SoC device being wlan-1.

- Invert port map so special handling of vlan config can be removed.
- Add LED config similar to original ArcOS firmware.
- Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1
- Get MACs from factory partition.
- Update description to list supported devices.
- Carambola uses RT3050 (not RT3052), though my Carambola CPU
  actually reports itself as being an RT3350 while still having
  RT3050F markings.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 36564
2013-05-06 16:45:35 +00:00
John Crispin 338ff04cab ramips: add gpio base properties to dtsi files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36560
2013-05-06 16:45:04 +00:00
John Crispin 65760ede8b ramips: unbreak rt2880 support
Signed-off-by: John Crsipin <blogic@openwrt.org>

SVN-Revision: 36559
2013-05-06 16:44:56 +00:00
John Crispin 28bdb9efe9 ramips: fix DIR-602D1 flash size
Fix DIR-620D1 flash size.

Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>

SVN-Revision: 36558
2013-05-06 16:44:47 +00:00
John Crispin cf3885eb0f ramips: introduce DTS for ALL5003
Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c.
With the change to DTS, this is no longer accurate, as ALL5002 is based on
Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding
rt5350.dtsi need to be included for ALL5003.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3557/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36435
2013-04-25 19:03:01 +00:00
John Crispin 7bfab6e308 ramips: Add Alpha ASL-26555 support.
This board uses a TrendChip SOC with its own RAM/Flash for ADSL support.
We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN.

There are two versions (Chile 8MB and Spain 16MB).

Wiki: http://wiki.openwrt.org/toh/alpha/asl26555

Signed-off-by: Esteban Benito <estebanjbs@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3571/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36433
2013-04-25 19:02:53 +00:00
John Crispin c7216d0cab ramips: Add support of D-link DIR-620D1
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36432
2013-04-25 19:02:48 +00:00
John Crispin a6424245e6 fix RT-N15 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36325
2013-04-12 18:56:44 +00:00
John Crispin 7af1fa46ad update rt2880.dtsi
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36324
2013-04-12 18:56:36 +00:00
John Crispin fb47fd0d6b unbreak portmapping - typo fix
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36293
2013-04-09 14:39:01 +00:00
John Crispin bc7b310959 move memory detect node to dtsi files
Signed-of-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36290
2013-04-09 14:19:36 +00:00
John Crispin 48feea4861 Add Netgear WNCE2001 (OF version)
Add Netgear WNCE2001.

This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.

Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming

The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.

The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.

http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 36289
2013-04-09 14:19:33 +00:00
John Crispin e468abcae0 remove bootargs from dts
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36288
2013-04-09 14:19:28 +00:00
John Crispin 82c3b7ce26 add ofpart info to the devicetrees
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36287
2013-04-09 14:19:24 +00:00
John Crispin f1e9d30ffc add sample swconfig portmap
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36286
2013-04-09 14:19:20 +00:00
Gabor Juhos 130f67210a ramips: TEW-691GR.dts fixes
* fix pinmux settings
* remove spi node
* add nor-flash node
* enable mdio-bus and add phy handle

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36276
2013-04-08 12:34:17 +00:00
Gabor Juhos 82705b30b3 ramips: OMNI-EMB-HPM.dts fixes
* add mdio-bus and phy nodes
* set phy-handle for the ethernet node
* define flash partiions
* cleanup flash node properties

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36273
2013-04-08 11:12:03 +00:00
Gabor Juhos 909fabe574 ramips: add mdio-bus node to rt3883.dtsi
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36272
2013-04-08 11:12:02 +00:00
Gabor Juhos 30e5bae84a ramips: fix console speed for OMNI-EMB-HPM
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36270
2013-04-08 08:24:51 +00:00
Gabor Juhos 4c85227cf4 ramips: TEW-692GR.dts fixes
* fix pinmux settings
* remove spi node
* add PCI node
* add nor-flash node

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36268
2013-04-08 07:11:35 +00:00
Gabor Juhos 97635d7a8e ramips: add PCI node into RTN56U.dts
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36264
2013-04-07 20:56:22 +00:00
Gabor Juhos 474264f64c ramips: add PCI node for rt3883.dtsi
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36263
2013-04-07 20:56:21 +00:00
Gabor Juhos 16d0ce52b0 ramips: fix polarity of GPIO buttons for RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36257
2013-04-07 16:24:33 +00:00
Gabor Juhos d1f28c6d1f ramips: add nor-flash node for the RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36249
2013-04-07 14:46:11 +00:00
Gabor Juhos 0c3c29ca38 ramips: fix pinmux settings for the RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36248
2013-04-07 14:46:10 +00:00
Gabor Juhos aedf05caa0 ramips: remove trailing whitespaces from dts files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36246
2013-04-07 13:32:37 +00:00
John Crispin 811f7f9f2d fix typos inside dts files
Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de>

SVN-Revision: 36244
2013-04-07 11:47:03 +00:00
John Crispin 709b19ed9f fix default commandline in dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36243
2013-04-07 11:46:54 +00:00
Gabor Juhos 10d8e4b66c ramips: remove top-level {address,size}-cells properties from .dts files
Those are defined in the SoC specific .dtsi files.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36237
2013-04-07 08:19:10 +00:00
Gabor Juhos 756b810178 ramips: fix ethernet switch node in DIR-645.dts
Fix a typo in the node name and add vendor prefix
for the compatible string.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36231
2013-04-06 17:19:35 +00:00
Gabor Juhos 1ef39b43dd ramips: remove spi node from RTN56.dts
The RT-N56U board uses a parallel flash.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36223
2013-04-06 12:37:40 +00:00
Gabor Juhos d57e662cda ramips: fix ethernet switch node in RTN56U.dts
The RT-N56U uses an RTL8367M switch.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36222
2013-04-06 12:37:38 +00:00
John Crispin d16de0b69f fix typo pinmmux -> pinmux
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36216
2013-04-06 11:46:34 +00:00
John Crispin e1a74d8ff7 fix typo that made gpiomuxing fail
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36212
2013-04-05 23:10:42 +00:00
John Crispin 93899a1329 add profile for tenda w150m board
http://patchwork.openwrt.org/patch/3371/

Signed-off-by: Chi Zhang <zhangchi866@gmail.com>

SVN-Revision: 36176
2013-04-03 10:00:21 +00:00
John Crispin 910b705155 add Huawei D105
http://patchwork.openwrt.org/patch/3510/

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 36173
2013-04-03 10:00:08 +00:00
John Crispin c1710901c5 add profile for the Edimax 3g-6200NL board
http://patchwork.openwrt.org/patch/3214/

Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net>

SVN-Revision: 36172
2013-04-03 10:00:03 +00:00
John Crispin 770b28f146 add the dts files that describe the boards in future
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36168
2013-04-03 09:59:46 +00:00