d6554bf66a
ar71xx: add kernel support for the RB2011UAS
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36792
2013-05-30 17:38:13 +00:00
d19dae6e2d
ar71xx: add profile and build image for the Archer C7 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36790
2013-05-30 16:23:10 +00:00
35b5b38316
ar71xx: add user-space support for TP-LINK Archer C7 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36789
2013-05-30 16:23:09 +00:00
91d7c3efc1
ar71xx: add kernel support for the TP-LINK Archer C7 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36788
2013-05-30 16:23:07 +00:00
f02765086d
ar71xx: add USB workarounds for AR934x/QCA955x SoCs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36787
2013-05-30 16:23:06 +00:00
6ff976a87a
ar71xx: add profile and build image for the DIR-601-B1
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36786
2013-05-30 16:19:30 +00:00
424c4c0b0a
ar71xx: allow to build CameoHornet images for multiple regions
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36785
2013-05-30 16:19:29 +00:00
184dd34b6d
ar71xx: allow to override fw version in CameoHornet profile
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36784
2013-05-30 16:19:28 +00:00
c4d0a49348
ar71xx: typo in detect TL-MR10U/TL-MR11U
...
At offset 0x40, signature for TL-MR10U/TL-MR11U begin
from 0x00, not 0x10/0x11.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36727
2013-05-26 16:38:00 +00:00
cc7bedf8a3
ar71xx: fix TL-MR10U usb power
...
MR10U is closer to MR3040 than WR703N. This changes also
enable USB power on GPIO18.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36726
2013-05-26 16:37:59 +00:00
46225b99d9
kernel: update linux 3.8 to 3.8.13
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36724
2013-05-26 16:02:31 +00:00
93ce462b7e
ar71xx: set eth0 mac address to match bottom label of the OM2P LC
...
Signed-off-by: marek@open-mesh.com
CC: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36723
2013-05-26 16:02:29 +00:00
0842478e44
ar71xx: add TP-LINK TL-MR10U
...
Small router with 4MB flash, 32MB RAM
http://www.tp-link.com.cn/product_300.html
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36722
2013-05-26 16:02:26 +00:00
fe7e52e4a4
ar71xx: disable jffs2 by default, it confuses users since many devices have incompatible eraseblock sizes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36679
2013-05-21 09:45:46 +00:00
56478636aa
ar71xx: remove the xfrm.h chunk from the unaligned access hacks, it breaks ipsec
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36646
2013-05-17 07:31:00 +00:00
144cfb65a4
ar71xx: add hard_cfg offset detection for rb2011 support - fixes wlan on some newer devices
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36631
2013-05-13 19:13:33 +00:00
526aedb705
kernel: move CONFIG_MIPS_SEAD3 to generic
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36617
2013-05-12 21:41:55 +00:00
0be8dd36dc
ar71xx: set mips16 support, tune cflags for 34kc (works well on MIPS 24K as well, but helps a lot for 34K and 74K)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36600
2013-05-09 23:32:46 +00:00
cb3d71ca8e
ar71xx: use combined kernel image in the CameoHornet template
...
This allow us to increase the kernel partition size,
and ensures, that the -factory image still usable via
the original interface.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36584
2013-05-08 17:11:10 +00:00
f938a798f8
ar71xx: add profile and build image for the RNX-N360RT board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36582
2013-05-08 17:07:19 +00:00
852b8e9490
ar71xx: add user-space model detection for the RNX-N360RT board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36581
2013-05-08 17:07:18 +00:00
c70694e755
ar71xx: add profile and build image for Netgear WNDAP360
...
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36580
2013-05-08 17:03:43 +00:00
33a2cbfd5c
ar71xx: add user-space support for Netgear WNDAP360
...
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36579
2013-05-08 17:03:42 +00:00
10b3ca5ccb
ar71xx: add kernel support for Netgear WNDAP360
...
Here is corrected version (only thing not working are wifi LEDs).
[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36578
2013-05-08 17:03:34 +00:00
e57c7d6c12
kernel: update linux 3.8 to 3.8.12
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36576
2013-05-08 08:53:53 +00:00
d09ba5ef10
ar71xx: Fix AP135 partition layout
...
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36575
2013-05-08 08:53:49 +00:00
ccf95fe938
ar71xx: Fix AP135 PCI
...
AP135 has a pluggable PCIE slot unlike AP136.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36541
2013-05-03 19:00:58 +00:00
18c588a570
ar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce the frequency of DMA stop failures
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36530
2013-05-03 09:12:19 +00:00
8a9fe26f20
kernel: update linux 3.8 to 3.8.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36507
2013-05-01 22:15:18 +00:00
0ae43dbe9d
ar71xx: rename WNR2000v3 support patch
...
Update the numbering of kernel patch for supporting
Netgear WNR2000v3 from 617 to 618.
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36498
2013-04-30 10:44:11 +00:00
f718179af5
kernel: update linux 3.8 to 3.8.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36493
2013-04-30 10:43:59 +00:00
7c2632fbc5
ar71xx: add user-space support for WNR2000v3
...
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36461
2013-04-26 17:00:54 +00:00
b29b7b65ea
ar71xx: add profile and build image for WNR2000v3
...
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36460
2013-04-26 17:00:53 +00:00
9b3c0d11a2
ar71xx: Add Netgear WNR2000v3 support
...
Network connectivity works fine (LAN and WAN).
For GPIOs, only pwr led and the green wan leds are supported for now.
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36459
2013-04-26 17:00:52 +00:00
183e2af1c7
ar71xx: add profile and build image for the TL-WR720N v3 board
...
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36458
2013-04-26 17:00:50 +00:00
7c4e2c1f72
ar71xx: add user-space support for the TL-WR720N v3 board
...
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36457
2013-04-26 17:00:49 +00:00
5c11773f8a
ar71xx: add kernel support for TPLINK WR720N v3
...
Add support for TPLINK WR720N v3 which has 4MB flash,
32MB ram, 2 ethernet interfaces, 1 USB 2.0 port.
The patch is mostly a modification from mach-tl-wr703n.c.
GPIO numbers for the slider switch is from mach-tl-mr3020n.c.
Tested on my device and they worked fine.
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36456
2013-04-26 17:00:48 +00:00
36d4fd70bc
kernel: update linux 3.8 to 3.8.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36453
2013-04-26 16:55:42 +00:00
4e8f7f37ed
Change default IPv6 config to enable DHCPv6-PD
...
SVN-Revision: 36384
2013-04-22 19:40:16 +00:00
cd35ea2174
ar71xx: merge more unaligned access hacks from cerowrt-next
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36374
2013-04-22 12:53:21 +00:00
151cadfe32
kernel: update linux 3.8 to 3.8.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36363
2013-04-19 08:07:34 +00:00
604395650a
kernel: update linux 3.8 to 3.8.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36332
2013-04-14 09:25:53 +00:00
ea94d66b0f
Adapt default network configuration for IPv6
...
SVN-Revision: 36278
2013-04-09 08:03:08 +00:00
f78c902cfd
kernel: update linux 3.8 to 3.8.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36215
2013-04-06 11:40:44 +00:00
f7da2127ab
ar71xx: fix ethernet LEDs on the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36122
2013-03-25 06:40:03 +00:00
39c132d154
ar71xx: add GPIO output select values for AR934x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36121
2013-03-25 06:40:00 +00:00
849201b1d8
ar71xx: add default LED configuration for the WL-WRD3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36120
2013-03-24 21:07:21 +00:00
cd5cca4ba8
ar71xx: fix USB power GPIO on the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36119
2013-03-24 19:23:47 +00:00
4daefc9480
ar71xx: remove numeric suffix of the TL-WDR3500 USB LED
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36118
2013-03-24 19:23:45 +00:00
a4a2a7189f
ar71xx: add diag support for the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36117
2013-03-24 19:23:43 +00:00
Gabor Juhos
Felix Fietkau
Jonas Gorski
Steven Barth