e7807dd8ca
dnsmasq: configure dnsmasq via flat config file and not command-line args
...
Sometimes it's useful to compare the generated config file from UCI config with a hand-edited dnsmasq config file, especially if you're migrating to an OpenWRT router from something else (such as Astlinux).
Putting the generated config makes it easier to capture and diff, etc.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 31182
2012-04-02 22:31:21 +00:00
265d0b379a
dnsmasq: add missing config_get, localize variables, bump package revision
...
SVN-Revision: 31058
2012-03-23 11:26:47 +00:00
c443f3d875
dnsmasq: add mx record support
...
Adding the following syntax support:
config mxhost
option domain mydomain.com
option relay svr10.ironport.com
option pref 50
and this will generate an MX record for mydomain.com pointing at the relay with a given preference.
Redux: default the preference to 0 if absent.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 31057
2012-03-23 11:19:58 +00:00
3747850535
dnsmasq: add keywords for SRV RR class/weight
...
The SRV record also requires the class and weight fields... Currently you can overload the "port" keyword as:
option port xxxx,class,weight
but this is counter-intuitive. Here we fix this.
Redux: make the port required.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 31056
2012-03-23 11:19:56 +00:00
0f74cb4631
dnsmasq: automatically add host entry for own hostname and ptr record for lan ip address
...
SVN-Revision: 29375
2011-12-01 21:34:45 +00:00
4f5cbf9f9b
package/dnsmasq: use new service wrapper
...
SVN-Revision: 28837
2011-11-07 22:58:45 +00:00
fce8379940
add cname section
...
SVN-Revision: 28493
2011-10-20 12:12:26 +00:00
50b69073d6
dnsmasq: allow hostname assignment without static lease The attached patch for dnsmasq.init allows to assign a hostname to a particular mac-address. It's useful to override the client supplied hostname, especially if the client does not supply a hostname at all.
...
It corresponds to the following example in dnsmasq.conf.example:
# Always set the name of the host with hardware address
# 11:22:33:44:55:66 to be "fred"
#dhcp-host=11:22:33:44:55:66,fred
Regards
Mathias
SVN-Revision: 26983
2011-05-24 09:12:50 +00:00
47310844bc
dnsmasq: fix logic for creating missing files
...
SVN-Revision: 25540
2011-02-14 19:42:53 +00:00
a8850efe9e
package/dnsmasq: use service_kill in initscript
...
SVN-Revision: 25537
2011-02-14 17:02:48 +00:00
e14097aca9
dnsmasq: add support for option "--dhcp-script" (thanks Bastian Bittorf)
...
SVN-Revision: 25137
2011-01-27 10:14:09 +00:00
516dcae1c7
dnsmasq: Fix parameter 'limit'
...
'limit' is actually the number of IP addresses to serve. See the use of ipcalc.sh.
For getting the expected number of IP addresses served, we have to decrement
limit by one.
Patch from: kentarou matsuyama <matsuyama@thinktube.com>
SVN-Revision: 25100
2011-01-26 11:33:33 +00:00
bd35e85116
Package dnsmasq init-file If an already running DHCP-server is found on the configured interface, the init-script refuses to start, but does not give a hint why. It took us some days to track down this behavior in our MANET, where every wifi/adhoc-node runs it own DHCP-server. Now syslog is more verbose on this.
...
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 24051
2010-11-21 13:53:27 +00:00
8c33c86021
dnsmasq: remove a useless subshell invocation from the init script
...
SVN-Revision: 23272
2010-10-06 13:23:56 +00:00
46016457c2
package/dnsmasq: add support for bogus-nxdomain (thanks to Mickey Knox), bump release number
...
SVN-Revision: 22592
2010-08-11 10:37:33 +00:00
f2ef7cc8af
dnsmasq: Squelch a 'touch' error when no dhcp leases file is defined in config, thanks stsp ( #7720 )
...
SVN-Revision: 22528
2010-08-08 10:53:28 +00:00
251c93bcbf
dnsmasq: add -c or --cache-size option to dnsmasq via cachesize UCI option ( #7625 )
...
SVN-Revision: 22490
2010-08-04 17:16:46 +00:00
97b10e38a8
Allow UCI interface names in /etc/config/dhcp Signed-off-by: Gabriel Kerneis <kerneis@pps.jussieu.fr>
...
SVN-Revision: 22487
2010-08-04 17:09:31 +00:00
1d7a6ebc79
dnsmasq: initscript: fix bool options handling, bump release number
...
SVN-Revision: 22251
2010-07-17 13:36:13 +00:00
9c3244a884
dnsmasq: add and enable DNS rebind protections
...
SVN-Revision: 22222
2010-07-16 00:06:59 +00:00
f30b179135
Add support for SRV records to dnsmasq config parsing
...
SVN-Revision: 21400
2010-05-08 12:35:29 +00:00
6f5203228f
dnsmasq: - when processing domain entries, append searchdomain to host entries if they are not fully qualified - create only one reverse record for address entries with multiple names
...
SVN-Revision: 21109
2010-04-23 13:40:50 +00:00
c876279bb2
dnsmasq: don't append search domain to custom host entries
...
SVN-Revision: 20935
2010-04-16 19:09:05 +00:00
a8e904a958
dnsmasq: allow multiple hostnames per domain section
...
SVN-Revision: 20656
2010-04-02 22:56:22 +00:00
0fd984fc4f
fix limit
...
SVN-Revision: 20275
2010-03-18 15:50:05 +00:00
e2f86520c5
remove +1 as it isn't needed since 16619
...
SVN-Revision: 20259
2010-03-18 01:39:02 +00:00
3a13fb95ab
if readethers is set to true make sure /etc/ethers exists, closes #6740
...
SVN-Revision: 20220
2010-03-14 21:33:02 +00:00
9b8ff17f8c
dnsmasq: remove redundant code introduced with r20074
...
SVN-Revision: 20079
2010-03-09 01:41:06 +00:00
58820edbd9
dnsmasq: allow multiple macs per static lease address ( #6205 )
...
SVN-Revision: 20074
2010-03-08 23:28:55 +00:00
4bbb272f48
dnsmasq: prevent bad command line error when a dhcp pool has ignore set and the corresponding iface has only whitespace as value
...
SVN-Revision: 20048
2010-03-08 03:52:04 +00:00
f40e9e8d8a
dnsmasq: only write search directive if domain is actually set
...
SVN-Revision: 19090
2010-01-10 15:31:58 +00:00
fd7889cf6f
dnsmasq: add local domain as search directive to /tmp/resolv.conf
...
SVN-Revision: 19086
2010-01-09 21:03:48 +00:00
02d30873eb
dnsmasq: Fix setting the network-id for config host sections This renames name to networkid where applicable, and re-adds the name option for hosts. Signed-off-by: Stefan Bethke <stb@lassitu.de>
...
SVN-Revision: 19069
2010-01-08 00:03:08 +00:00
2a83e90ceb
dnsmasq: While trying to document the dhcp UCI config, I noticed that the name config option is applied wrongly when adding static addresses. Cf. the dnsmasq man page. Signed-off-by: Stefan Bethke <stb@lassitu.de>
...
SVN-Revision: 18934
2009-12-26 00:23:35 +00:00
5a485c4112
dnsmasq: Set a list of addnhosts files. e.g. list 'addnhosts' '/var/etc/hosts.olsr' list 'addnhosts' '/var/etc/hosts.olsrv6' hosts.olsr for ipv4 and hosts.olsrv6 for ipv6 addresses. Signed-off-by: Patrick Grimm <patrick@lunatiki.de>
...
SVN-Revision: 18470
2009-11-22 11:52:08 +00:00
0582d1ffb7
dnsmasq: - make "name" option in "host" sections optional and append it to -G if set, allows specifying hostnames for static leases without resorting to /etc/hosts - implement "domain" sections, allows defining arbitary host names and associated ptr records from uci - bump package revision
...
SVN-Revision: 17897
2009-10-05 16:58:06 +00:00
c067858fdf
dnsmasq startup script update: add notinterface parameter
...
This tiny patch makes the dnsmasq init.d script listen to a parameter called "notinterface", which tells dnsmasq to not listen on a defined set of interfaces.
By default dnsmasq *always* listens on the loopback interface, even if you tell it to specifically listen on a certain other interface. Sometimes this is not desirable behaviour, so you might want to turn it off. This is useful when, for example, you want to have your own DNS server listening on the loopback interface.
Signed-off-by: Johnny Halfmoon <jhalfmoon at milksnot.com>
SVN-Revision: 17599
2009-09-16 18:15:31 +00:00
ff3c63fb61
dnsmasq: add option to specify dhcp-hostsfile ( #5079 )
...
SVN-Revision: 15747
2009-05-09 22:34:04 +00:00
e85943d41a
fixed dnsmasq init for "ignore" option
...
dnsmasq.init tried to set range options even when ignore was
set to "1". Now the functions stops processing after evaluating
the "ignore" option when the result is > 0
SVN-Revision: 15618
2009-05-05 11:00:00 +00:00
807c0426bf
changed "option" to "list" for binding interfaces
...
SVN-Revision: 15613
2009-05-05 09:33:56 +00:00
d63666203c
dnsmasq: add more options for interface binding ( #4900 )
...
SVN-Revision: 15172
2009-04-09 14:51:15 +00:00
cd978f4531
make "name" parameter optional in dnsmasq "boot" config sections
...
SVN-Revision: 14557
2009-02-18 22:00:36 +00:00
02cc61b0e4
"-R" will not work as it needs the configured IP on the interface. Thus this option leads to the warning message: "udhcpc: bind(UDP): Cannot assign requested address"
...
SVN-Revision: 14408
2009-02-04 14:58:31 +00:00
b05f64dd06
- added "server" option list to delegate specific subdomains to given upstream servers
...
SVN-Revision: 14232
2009-01-27 22:58:11 +00:00
d0d1d9fd57
Ucified PXE-Boot options for dnsmasq
...
SVN-Revision: 12960
2008-10-13 07:39:56 +00:00
05118305ec
dnsmasq: Use a more intelligent way of parsing dhcp-options using the new UCI list datatype
...
SVN-Revision: 12547
2008-09-07 20:07:55 +00:00
fefd23fe13
restore the /tmp/resolv.conf symlink when stopping dnsmasq
...
SVN-Revision: 12546
2008-09-07 15:22:25 +00:00
347913a53c
add option to cache local queries, from sn9
...
SVN-Revision: 12485
2008-09-02 01:37:06 +00:00
5e942a9011
fixes dbus param of dnsmasq, #3818 , thanks the.loeki
...
SVN-Revision: 11967
2008-07-28 07:59:40 +00:00
ed3aeb2031
This adds dhcp-boot support to dnsmasq-init: option name "virt0" option filename "pxelinux.0" option servername "mainframe0.dev" option serveraddress "9.3.2.1"
...
closes #3529
SVN-Revision: 11663
2008-07-05 13:43:55 +00:00
Jo-Philipp Wich
Nicolas Thill
Travis Kemen
Felix Fietkau
Vasilis Tsiligiannis
Peter Denison
Markus Wigge
Steven Barth
John Crispin
Florian Fainelli