Commit Graph

8575 Commits (d3c8852fd16710f6ca592659257db913e84571b5)

Author SHA1 Message Date
Gabor Juhos 9dd7a6d9e2 ppc44x: remove 3.2 support
SVN-Revision: 31901
2012-05-27 15:01:30 +00:00
Gabor Juhos 05d74942b1 ppx44x: switch to 3.3 and add broken flag
SVN-Revision: 31900
2012-05-27 15:01:28 +00:00
Gabor Juhos 9300e0496c ppc44x: add support for 3.3
Compile tested only.

SVN-Revision: 31899
2012-05-27 15:01:27 +00:00
Gabor Juhos c50f1f7536 cobalt: switch to 3.3 and add broken flag
Compile tested only.

SVN-Revision: 31898
2012-05-27 15:01:26 +00:00
Gabor Juhos 471cf87ff0 ep93xx: remove 3.2 support
SVN-Revision: 31897
2012-05-27 15:01:24 +00:00
Gabor Juhos 400b9b5b87 ep93xx: switch to 3.3 and add broken flag
SVN-Revision: 31896
2012-05-27 15:01:23 +00:00
Gabor Juhos 7501f2364f ep93xx: add support for 3.3
Compile tested only.

SVN-Revision: 31895
2012-05-27 15:01:21 +00:00
Gabor Juhos 907e88a37f au1000: remove 3.2 support
SVN-Revision: 31894
2012-05-27 15:01:18 +00:00
Gabor Juhos fbe10e73c6 au1000: switch to 3.3 and add broken flag
SVN-Revision: 31893
2012-05-27 15:01:17 +00:00
Gabor Juhos e065d5cfbe au1000: add support for 3.3
Compile tested only.

SVN-Revision: 31892
2012-05-27 15:01:15 +00:00
Gabor Juhos de4c4d35e1 linux/3.1: R.I.P.
SVN-Revision: 31891
2012-05-27 15:01:09 +00:00
Gabor Juhos cead4b47ab omap24xx: remove 3.1 support
SVN-Revision: 31890
2012-05-27 15:01:07 +00:00
Gabor Juhos 7a4db11fbb omap24xx: switch to 3.3 and add broken flag
SVN-Revision: 31889
2012-05-27 15:01:05 +00:00
Gabor Juhos d004168445 cns3xxx: remove 3.1 support
SVN-Revision: 31888
2012-05-27 15:01:03 +00:00
Gabor Juhos 6f2ca5da39 cns3xxx: switch to 3.3 and add broken flag
SVN-Revision: 31887
2012-05-27 15:01:02 +00:00
Felix Fietkau 6f89cffc9a kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance with mac80211 based drivers
SVN-Revision: 31886
2012-05-27 14:43:58 +00:00
Jonas Gorski ec7786c2ec bcm63xx: build images for DSL-274XB revision F1
Build images for D-Link DSL-274XB revision F1. Flashing
through original web UI as well as CFE works.

Known issues:
  * wifi led inverted (on when wifi is off and vice cersa)
  * same issues as generic bcm6328 support

SVN-Revision: 31885
2012-05-27 13:22:51 +00:00
Jonas Gorski 8aac009cc9 bcm63xx: add ath9k to atheros wifi profile
SVN-Revision: 31884
2012-05-27 13:22:48 +00:00
Jonas Gorski 4aa43122ab bcm63xx: enable bcm6328 support and required drivers
BCM6328 support is in a usable state, with the following issues

 * internal switch port not configurable
 * external phys not supported
 * broadcom wifis will probably not work correctly
 * and all other generic bcm63xx issues (so yes, still no ADSL)

SVN-Revision: 31883
2012-05-27 13:22:46 +00:00
Jonas Gorski e5575fe335 bcm63xx: add support for DSL-274XB rev F1
SVN-Revision: 31882
2012-05-27 13:22:43 +00:00
Jonas Gorski a7a82db16f bcm63xx: fix port state after network down
bcm_enetsw_probe did not properly reset port states, resulting in
connected ports staying disabled after bringing up the interface the
second time.

SVN-Revision: 31881
2012-05-27 13:22:40 +00:00
Jonas Gorski e19ed52fd1 bcm63xx: add a fixup for ath9k devices
SVN-Revision: 31880
2012-05-27 13:22:37 +00:00
Jonas Gorski e34018cc9e bcm63xx: add support for the HSSPI controller
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.

SVN-Revision: 31879
2012-05-27 13:22:33 +00:00
Jonas Gorski 099d5eec06 bcm63xx: add preliminary support for bcm6328
SVN-Revision: 31878
2012-05-27 13:22:29 +00:00
Jonas Gorski 7dbb132c88 bcm63xx: add flash type detection
SVN-Revision: 31877
2012-05-27 13:22:25 +00:00
Jonas Gorski b0ffeb0021 bcm63xx: pad Speedport W303 V images to 4 MiB
Prevents CFE from flashing to the second image offset. Fix up the rootfs
length on first boot else CFE will complain.

SVN-Revision: 31876
2012-05-27 13:22:22 +00:00
Jonas Gorski 226b030e44 bcm63xx: add a default switch configuration for DSL-274XB
SVN-Revision: 31874
2012-05-27 13:22:17 +00:00
Jonas Gorski db1ff5c6fa bcm63xx: setup network config through uci-defaults
SVN-Revision: 31873
2012-05-27 13:22:14 +00:00
Jonas Gorski 72b4fdecc9 bcm63xx: move the board name workaround to /lib/brcm63xx.sh
SVN-Revision: 31872
2012-05-27 13:22:11 +00:00
Jonas Gorski dd37687de0 bcm63xx: use the exact board id as board identification string
No need to keep the bcm63xx/ at the start or the chipid info at the end.

SVN-Revision: 31871
2012-05-27 13:22:08 +00:00
Felix Fietkau 230c0eb2cb kernel: fix a warning in the connmark module
SVN-Revision: 31856
2012-05-24 18:25:08 +00:00
Gabor Juhos 2ae5581447 kernel: update linux 3.3 to 3.3.7
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
Gabor Juhos c57409e79d ar71xx: fix an insignificant typo
Patch from #11485.

SVN-Revision: 31847
2012-05-23 21:05:30 +00:00
Gabor Juhos 013f434f5b ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD
Patch by Kamil Trzciński <ayufan@osk-net.pl>

SVN-Revision: 31846
2012-05-23 21:05:25 +00:00
Gabor Juhos 758f670376 ar71xx: add support for TP-Link TL-MR3040
Support for TP-Link TL-MR3040. Power LED not working - always on red, after
start should be green.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 31845
2012-05-23 21:05:24 +00:00
Gabor Juhos e4720dfa95 ramips: Add byte queue limits support to net/ethernet/ramips_main.c
Add byte queue limits support to net/ethernet/ramips_main.c

"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31844
2012-05-23 21:05:23 +00:00
Gabor Juhos 1d286fd755 ramips: Enable sysupgrade for Sitecom WL-351
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31843
2012-05-23 21:05:22 +00:00
Gabor Juhos 1e1c0a5405 linux/3.3: avoid recursive calling of mtd_writev in the block2mtd driver
Should fix #11513. Tested with the x86/generic squashfs image within a VM.

SVN-Revision: 31841
2012-05-23 21:05:19 +00:00
Felix Fietkau 9037c2ccc6 lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520
SVN-Revision: 31835
2012-05-20 21:58:03 +00:00
Felix Fietkau ce59af117c kernel: merge a net-next fq_codel backlog handling fix
SVN-Revision: 31813
2012-05-18 22:12:15 +00:00
Gabor Juhos 02c2f449d7 omap24xx: add support for 3.3
Compile tested only.

SVN-Revision: 31810
2012-05-18 20:22:32 +00:00
Gabor Juhos c2a2d59db5 cns3xxx: add support for 3.3
Compile tested only.

SVN-Revision: 31809
2012-05-18 20:10:53 +00:00
Gabor Juhos 1fd4bf270b linux/2.6.39: R.I.P.
SVN-Revision: 31808
2012-05-18 20:10:51 +00:00
Gabor Juhos 05c0d8b28e cns3xxx: sync kernel config
SVN-Revision: 31807
2012-05-18 20:10:48 +00:00
Gabor Juhos 9718f03e24 cns3xxx: remove 2.6.39 support
SVN-Revision: 31806
2012-05-18 20:10:46 +00:00
Gabor Juhos 9e78becbac cns3xxx: switch to 3.1
Compile tested only.

SVN-Revision: 31805
2012-05-18 20:10:44 +00:00
Gabor Juhos 07b5a3eea2 x86: remove support for old kernels
SVN-Revision: 31804
2012-05-18 20:10:42 +00:00
Gabor Juhos 604e3aac0a x86: remove subtarget specific LINUX_VERSION overrides
SVN-Revision: 31803
2012-05-18 20:10:38 +00:00
Gabor Juhos d9dab97d38 x86/ep80579: switch to 3.3
Also fix build errors in the ep80579-drivers package.
Compile tested only.

SVN-Revision: 31802
2012-05-18 20:10:33 +00:00
Hauke Mehrtens c63ef04874 brcm47xx: fix nvram read out on devices with serial flash
detect nvram on Linksys E3200

SVN-Revision: 31790
2012-05-18 16:04:10 +00:00
Hauke Mehrtens 7ad663dda6 brcm47xx: bcma: fix null pointer
SVN-Revision: 31789
2012-05-18 15:46:30 +00:00
Hauke Mehrtens b4ecf522cd brcm47xx: ssb: recognize ARM Cortex M3
SVN-Revision: 31788
2012-05-18 15:45:51 +00:00
Hauke Mehrtens 7be88d2ad8 brcm47xx: some fixes for the USB driver
SVN-Revision: 31787
2012-05-18 15:44:25 +00:00
Gabor Juhos e3678eb33e cobalt: remove 2.6.39 specific patches
SVN-Revision: 31785
2012-05-18 09:59:22 +00:00
Gabor Juhos a5de52c244 x86/olpc: switch to 3.3
Compile tested only.

SVN-Revision: 31784
2012-05-18 09:57:32 +00:00
Gabor Juhos 9e54e012d6 x86: image: select bootscript images by default for OLPC
SVN-Revision: 31783
2012-05-18 09:57:29 +00:00
Felix Fietkau 3f62f5211a adm5120: add missing config symbols for the rb1xx subtarget, fixes #11407
SVN-Revision: 31781
2012-05-17 21:20:23 +00:00
Felix Fietkau 03babf3641 target: add a feature flag for RTC support
SVN-Revision: 31777
2012-05-17 15:28:09 +00:00
Hauke Mehrtens c30405070c kernel: add some missing config options added by r31756
SVN-Revision: 31774
2012-05-17 13:28:30 +00:00
Hauke Mehrtens 273797f15a kernel: ssb/bcma: update to version from wireless-testing tag master-2012-05-16-2
SVN-Revision: 31772
2012-05-17 13:22:38 +00:00
Hauke Mehrtens 3491d8c017 brcm47xx: remove support for kernel 3.2
SVN-Revision: 31771
2012-05-17 13:20:10 +00:00
Gabor Juhos 562e468ae5 x86/thincan: switch to 3.3
Compile tested only.

SVN-Revision: 31765
2012-05-17 06:41:01 +00:00
Gabor Juhos 1f7f8376a6 x86/xen_domu: switch to 3.3
Compile tested only.

SVN-Revision: 31764
2012-05-17 06:41:00 +00:00
Gabor Juhos 8bb7ddecfd x86/kvm_guest: switch to 3.3
Compile tested only.

SVN-Revision: 31763
2012-05-17 06:40:58 +00:00
Gabor Juhos f14d1a588d x86/generic: switch to 3.3
Compile tested only.

SVN-Revision: 31762
2012-05-17 06:40:56 +00:00
Felix Fietkau 54edbfabac kernel: add codel and fq_codel to generic 3.3 patch set (based on patch by Dave Täht)
Codel is a new AQM algorithm and RED replacement designed by
Kathie Nichols and Van Jacobson, and published in ACM queue:

http://queue.acm.org/detail.cfm?id=2209336

Codel stands for "Controlled Delay", and needs no knobs in the
general case, twiddled, for optimum results. It aims for 5ms of
delay, at most, when in use.

Additionally,

fq_codel (by eric dumazet) builds on codel to provide fair queuing
superior to what could be had with SFQ, and drop behavior saner
than RED, BLUE, or choke.

These patches are backported from net-next and are known to work
on Linux 3.3.4 and later.

Includes updates to codel for better portability and speed

SVN-Revision: 31756
2012-05-16 15:23:03 +00:00
Gabor Juhos eb2fe5e863 x86/alix2: switch to 3.3
Compile tested only.

SVN-Revision: 31753
2012-05-16 10:45:02 +00:00
Gabor Juhos fb7da5bbde x86/net5501: switch to 3.3
Compile tested only.

SVN-Revision: 31752
2012-05-16 10:44:59 +00:00
Gabor Juhos 9e049ce25c x86: sync 3.3 configs
SVN-Revision: 31751
2012-05-16 10:44:55 +00:00
Gabor Juhos 19f691f8e4 x86: sync 3.2 configs
SVN-Revision: 31750
2012-05-16 10:44:52 +00:00
Gabor Juhos 724fd5e657 x86: sync 2.6.39 configs
SVN-Revision: 31749
2012-05-16 10:44:49 +00:00
Gabor Juhos 637fd23428 linux/3.3: add missing symbol
SVN-Revision: 31748
2012-05-16 10:44:46 +00:00
Gabor Juhos 67675fd48d linux: add CONFIG_POWER_SUPPLY_DEBUG symbol
It was missing in the previous commit.

SVN-Revision: 31738
2012-05-15 11:12:31 +00:00
Gabor Juhos 39994008cb linux: move certain disabled symbols to the generic configs
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
Felix Fietkau a3f2fd187b ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet)
SVN-Revision: 31736
2012-05-15 10:36:39 +00:00
John Crispin 364f47e454 code style cleanup of the mach files
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31735
2012-05-15 09:38:05 +00:00
John Crispin 07dca108a9 adds zyxel p2601hnfx support
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31734
2012-05-15 09:38:02 +00:00
John Crispin 9785ec070e set 3.3.6 as default
SVN-Revision: 31733
2012-05-15 09:37:59 +00:00
John Crispin c61ada1db8 set 3.3.5 as default
SVN-Revision: 31718
2012-05-14 16:11:26 +00:00
Gabor Juhos 2fceae7ec4 linux/3.0: R.I.P.
It is used by the broken omap35xx/gumstix target only.

SVN-Revision: 31717
2012-05-14 15:48:34 +00:00
Gabor Juhos a3d349a3b3 realview: remove 3.0 support
SVN-Revision: 31716
2012-05-14 15:48:32 +00:00
Gabor Juhos e2ecabd761 realview: switch to 3.3
SVN-Revision: 31715
2012-05-14 15:48:31 +00:00
Gabor Juhos 46c7d58726 realview: add 3.3 support
SVN-Revision: 31714
2012-05-14 15:48:29 +00:00
Gabor Juhos 8f629f2a22 linux/3.3: more missing config symbols
SVN-Revision: 31713
2012-05-14 15:48:23 +00:00
Felix Fietkau fab5ee9566 imagebuilder: explicitly install the kernel .ipk before installing anything else, it is no longer part of the package index (fixes #11450)
SVN-Revision: 31711
2012-05-14 14:00:01 +00:00
Hauke Mehrtens a798a81890 kernel: add CONFIG_BLK_DEV_PCIESSD_MTIP32XX
SVN-Revision: 31710
2012-05-14 11:28:02 +00:00
Gabor Juhos b472e5d12e kernel: update linux 3.3 to 3.3.6
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
Hauke Mehrtens 679b6a0722 amazon: fix section mismatch
SVN-Revision: 31707
2012-05-13 15:31:42 +00:00
Hauke Mehrtens abd74f86b4 amazon: update amazon target to kernel 3.3
This is just compile tested, my device is currently not working.

SVN-Revision: 31706
2012-05-13 15:10:40 +00:00
Gabor Juhos 60d3ffb49a gemini: remove 2.6.37 support
SVN-Revision: 31700
2012-05-13 12:04:04 +00:00
Gabor Juhos 672ff3de6e gemini: switch to 3.3
SVN-Revision: 31699
2012-05-13 12:04:02 +00:00
Gabor Juhos d0ac4c1f03 gemini: add support for 3.3
SVN-Revision: 31698
2012-05-13 12:03:59 +00:00
Hauke Mehrtens 482b99a660 brcm47xx: generate image for Linksys WRT610N V1
SVN-Revision: 31696
2012-05-13 00:16:57 +00:00
Hauke Mehrtens 31c2c485c1 kernel: ssb: add PCI IDs 0x4322 and 43222
The 0x4322 ID is found on the BCM4322 used on some SoCs like the
Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID
is found on the BCM43222 used on some other SoCs like the D-Link
DSL-2760U connected to a BCM63xx.

This fixes #10887.

SVN-Revision: 31695
2012-05-13 00:08:12 +00:00
Hauke Mehrtens 5acb0b72be brcm47xx: fix tg3 ssb patch
Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again).

SVN-Revision: 31694
2012-05-12 23:59:12 +00:00
Gabor Juhos e710aeeab1 linux/2.6.38: R.I.P.
It is used only by the broken coldfire target.

SVN-Revision: 31688
2012-05-12 12:05:21 +00:00
Gabor Juhos 08ed044595 linux/2.6.37: R.I.P.
SVN-Revision: 31687
2012-05-12 12:05:19 +00:00
Gabor Juhos c8cede6aa7 linux: add broken flag to remaining targets which are using 2.6.37
SVN-Revision: 31686
2012-05-12 12:05:18 +00:00
Gabor Juhos a2efef024e iop32x: remove 2.6.37 support
SVN-Revision: 31685
2012-05-12 10:49:36 +00:00
Gabor Juhos a5d4de7da2 iop32x: switch to 3.3
It is compile tested only, so add a broken flag.

SVN-Revision: 31684
2012-05-12 10:49:34 +00:00
Gabor Juhos 598fe0e93b iop32x: add 3.3 support
SVN-Revision: 31683
2012-05-12 10:49:32 +00:00
Gabor Juhos bf8e96712e sibyte: remove 2.6.37 support
SVN-Revision: 31682
2012-05-12 10:49:30 +00:00
Gabor Juhos edb129bb24 sibyte: switch to 3.3
It is compile tested only, so add a broken flag.

SVN-Revision: 31681
2012-05-12 10:49:28 +00:00
Gabor Juhos fd651daa4b sibyte: add 3.3 support
SVN-Revision: 31680
2012-05-12 10:49:26 +00:00
Gabor Juhos 4f6acae5f7 ixp4xx: fix ixp4xx_crypto build error
SVN-Revision: 31679
2012-05-12 10:49:23 +00:00
Gabor Juhos cabfa5b364 orion: remove the broken broken flag
It is working on the Linksys WRT350N v2 at least:
http://pastebin.com/KCAbJZs9

Additionally, the flag was added to a wrong place
so it had no effect.

Thanks to StrikerNL for testing.

SVN-Revision: 31674
2012-05-10 20:20:43 +00:00
Gabor Juhos ec27c35ebe kirkwood: fix Kconfig symbol for NSA-310
SVN-Revision: 31673
2012-05-09 16:16:52 +00:00
John Crispin dc4cfd3a64 Add 3.3 config files
SVN-Revision: 31672
2012-05-09 12:52:24 +00:00
John Crispin 75827c538d Add missing 3.3 patches
SVN-Revision: 31671
2012-05-09 12:52:21 +00:00
John Crispin 7d638fbb2f Drop 2.6.32 support
SVN-Revision: 31670
2012-05-09 12:52:19 +00:00
Gabor Juhos 200227e0b4 kirkwood: add support for the ZyXEL NSA-310
SVN-Revision: 31669
2012-05-09 11:38:43 +00:00
Gabor Juhos 213cbf4297 kirkwood: add RaidSonic ICY BOX IB-NAS62x0 board support
Based on a patch by Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31668
2012-05-09 11:38:41 +00:00
Gabor Juhos d4876692c1 kirkwood: enable GPIO sysfs interface
SVN-Revision: 31667
2012-05-09 11:38:40 +00:00
Gabor Juhos d1eed108bb kirkwood: nuke 2.6.37 support
SVN-Revision: 31666
2012-05-09 11:38:39 +00:00
Gabor Juhos 861b9b25e0 kirkwood: switch to 3.3
SVN-Revision: 31665
2012-05-09 11:38:37 +00:00
Gabor Juhos b272041998 kirkwood: add 3.3 support
Based on the 3.2.9 patches by Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31664
2012-05-09 11:38:36 +00:00
Gabor Juhos 500ec36515 ixp4xx: nuke 2.6.37 support
SVN-Revision: 31663
2012-05-09 10:48:44 +00:00
Gabor Juhos d25a4e7ddc ixp4xx: switch to 3.3
SVN-Revision: 31662
2012-05-09 10:48:43 +00:00
Gabor Juhos d5093de0b1 mpc85xx: remove 2.6.38 support
SVN-Revision: 31661
2012-05-09 10:48:41 +00:00
Gabor Juhos ab71a428c5 mpc85xx: switch to 3.3 and add broken flag
It is compile tested only.

SVN-Revision: 31660
2012-05-09 10:48:39 +00:00
Gabor Juhos db376b45d9 orion: nuke 3.0 support
SVN-Revision: 31659
2012-05-09 10:48:38 +00:00
Gabor Juhos 24e2385a59 orion: switch to 3.3 and add broken flag
It is compile tested only.

SVN-Revision: 31658
2012-05-09 10:48:37 +00:00
Gabor Juhos d640a15b73 linux/3.3: add missing RTC symbol
SVN-Revision: 31654
2012-05-09 10:48:30 +00:00
Gabor Juhos 93c9980b94 ar71xx: fix build error if PCI is disabled
SVN-Revision: 31646
2012-05-07 21:16:22 +00:00
Gabor Juhos 34018a630f kernel: update linux 3.3 to 3.3.5
SVN-Revision: 31645
2012-05-07 20:11:43 +00:00
Gabor Juhos 6b5012ce1f pxa: remove 2.6.37 support
SVN-Revision: 31643
2012-05-07 17:40:15 +00:00
Gabor Juhos 1f1fd8616f pxa: switch to 3.3 and mark it as broken
It is working in qemu, but it has not been tested on real hardware.

SVN-Revision: 31642
2012-05-07 17:40:09 +00:00
Gabor Juhos b284c0e804 pxa: add support for 3.3
SVN-Revision: 31641
2012-05-07 17:40:06 +00:00
Jo-Philipp Wich 1a01559520 atheros: Fix compilation
With our recent switch to the 3.3 kernel target, some headers were
occidentally omitted.

Signed-off-by: Jonathan Bither <jonbither@gmail.com>

SVN-Revision: 31640
2012-05-07 17:06:39 +00:00
Jonas Gorski b218b15709 bcm63xx: fix a race between PCI bus scan and fallback sprom registration
The fallback sprom handler was installed too late, resulting in ssb
failing to get a valid sprom on some devices.

Fixes #11384.

SVN-Revision: 31638
2012-05-06 21:25:34 +00:00
Felix Fietkau 0ff3c396d3 kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes
SVN-Revision: 31637
2012-05-06 21:19:14 +00:00
Hauke Mehrtens d30f8da466 brcm47xx: add gpio_request_one()
This fixes a compile error with kernel 3.3.

SVN-Revision: 31635
2012-05-06 20:44:37 +00:00
Felix Fietkau 7799c88aa4 atheros: clean up the patches some more
SVN-Revision: 31626
2012-05-06 17:15:00 +00:00
Felix Fietkau 9b20187ad5 atheros: update to 3.3.4 (based on work by acoul), fix mvswitch driver for newer kernels
SVN-Revision: 31625
2012-05-06 17:08:30 +00:00
Jonas Gorski 30362b90af AR7: don't mark as broken
Linux 3.3.4 boots fine on my AR7 device.

SVN-Revision: 31623
2012-05-06 14:04:19 +00:00
Gabor Juhos 28e897845f ar7: remove 2.6.37 support
SVN-Revision: 31617
2012-05-05 17:32:43 +00:00
Gabor Juhos 047a51c4fd ar7: switch to 3.3 and mark the target as broken
SVN-Revision: 31616
2012-05-05 17:32:41 +00:00
Gabor Juhos dd884a6b73 ar7: add 3.3 support
SVN-Revision: 31615
2012-05-05 17:32:39 +00:00
Gabor Juhos e85a44f11b ar7: fix kernel_entry extraction
SVN-Revision: 31614
2012-05-05 17:32:36 +00:00
Gabor Juhos 9486904079 ar71xx: add profile and build image for the TL-WR1041N v2 board
Patch-by: Vince Huang <axishero@foxmail.com>

SVN-Revision: 31610
2012-05-05 17:02:41 +00:00
Gabor Juhos ab897ab04e ar71xx: add support for the TP-Link TL-WR1041N v2 board
Patch-by: Vince Huang <axishero@foxmail.com>

SVN-Revision: 31608
2012-05-05 17:02:35 +00:00
Gabor Juhos 56f2e08537 ar71xx: update 3.3 patches
SVN-Revision: 31602
2012-05-05 13:56:35 +00:00
Gabor Juhos 8fffc6d6df ar71xx: fix a typo in the db120 mach file
Reported-by: Sven Eckelmann <sven@narfation.org>

SVN-Revision: 31601
2012-05-05 13:56:30 +00:00
Hauke Mehrtens 8c352ff853 brcm47xx: update target to kernel 3.3
SVN-Revision: 31599
2012-05-05 12:53:37 +00:00
Gabor Juhos 2e3f8c480e linux/2.6.32: R.I.P.
SVN-Revision: 31597
2012-05-05 11:43:34 +00:00
Gabor Juhos e005aed223 rdc: remove 2.6.32 support
SVN-Revision: 31596
2012-05-05 11:43:32 +00:00
Gabor Juhos 0e086cfaf7 rdc: switch to 3.3 and mark the target as broken
SVN-Revision: 31595
2012-05-05 11:43:30 +00:00
Gabor Juhos 787b253859 rb532: remove 2.6.32 support
SVN-Revision: 31594
2012-05-05 11:43:29 +00:00
Gabor Juhos 63a532a472 rb532: switch to 3.3 and mark the target broken
SVN-Revision: 31593
2012-05-05 11:43:26 +00:00
Gabor Juhos b120e7f22a rb532: add 3.3 support
SVN-Revision: 31592
2012-05-05 11:43:23 +00:00
Gabor Juhos 6caa1aab10 mpc83xx: remove broken flag
SVN-Revision: 31591
2012-05-05 11:43:21 +00:00
Gabor Juhos 257a201b56 mpc83xx: populate network config from an uci-default script
SVN-Revision: 31590
2012-05-05 11:43:19 +00:00
Gabor Juhos 13ce8f8a77 mpc83xx: cleanup rb333.dts
SVN-Revision: 31589
2012-05-05 11:43:16 +00:00
Gabor Juhos a3d9877518 mpc83xx: fix MAC addresses on the RB333
SVN-Revision: 31588
2012-05-05 11:43:13 +00:00
Gabor Juhos 1a5a9c5dae mpc83xx: fix build warnings in RB333/600 dtb wrappers
SVN-Revision: 31587
2012-05-05 11:43:10 +00:00
Gabor Juhos 7ffa3fe02c linux/2.6.32: fix layer7 patch
SVN-Revision: 31586
2012-05-05 07:20:13 +00:00
Imre Kaloz 9a91dc9f71 upgrade to 3.3, enable framebuffer
SVN-Revision: 31576
2012-05-03 21:51:58 +00:00
Jonas Gorski b393464fb4 adm5120: add missing NULL terminator to partition parser list
Fixes #11372.

SVN-Revision: 31574
2012-05-03 21:03:50 +00:00
Hauke Mehrtens 22b2e3fbb9 brcm47xx: add support for kernel 3.3
SVN-Revision: 31573
2012-05-03 20:18:41 +00:00
Gabor Juhos 3349cf2691 Fix iptables abuse of kernel header files. Use exported headers instead.
[juhosg: export xt_layer7.h for all kernel versions]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

SVN-Revision: 31566
2012-05-03 09:43:10 +00:00
Gabor Juhos b0449ccf04 ramips: W306R V2.0 - GPIO and Network fixes
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
       removing a line(default is correct), and reversed the
       Lan/wan layout LLLLW to WLLLL.

Added: image/Makefile now builds -factory.bin files. I am
       unsure of the accepted way to change the makefile but
       the name of the image needs to be 'linkn Kernel Image'
       in order to be accepted by the OEM firmware.

Known issue: eth0 (internal switch i think has mac address:
       00:11:22:33:44:55  but i think it should be same as
       the lan).
Known issue: Pressing the reset button has no noticable effect,
       i would expect the router to boot failsafe if being
       pressed on boot, reboot if short press and reset all
       to default if long press.

[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]

Signed-off-by: David Pearce <david_18051985@hotmail.com>

SVN-Revision: 31557
2012-05-02 19:17:59 +00:00
Gabor Juhos 90e99b9fe8 ramips: Make serial console for DIR-300-B1 work again
Make serial console for DIR-300-B1 work again.

With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.

Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31556
2012-05-02 19:17:58 +00:00
Gabor Juhos fb28062182 mpc83xx: remove 2.6.36 support
SVN-Revision: 31555
2012-05-02 18:27:26 +00:00
Gabor Juhos 3269924fed mpc83xx: switch to 3.3
SVN-Revision: 31554
2012-05-02 18:27:25 +00:00
Gabor Juhos 8ee595315d mpc83xx: add support for 3.3
SVN-Revision: 31553
2012-05-02 18:27:22 +00:00
Gabor Juhos b4b5f2d018 linux/3.3: add more missing symbols
SVN-Revision: 31552
2012-05-02 18:27:19 +00:00
Florian Fainelli 5d9b44d110 use a define for the poll and debounce interval
SVN-Revision: 31550
2012-05-02 15:40:26 +00:00
Gabor Juhos 7a2b3d8a55 linux/3.3: add more missing symbols
SVN-Revision: 31548
2012-05-01 08:00:26 +00:00
Gabor Juhos 70322ba3d1 move CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT to the target configs
SVN-Revision: 31547
2012-05-01 08:00:25 +00:00
Imre Kaloz 880de62f91 switch to 2.6.38
SVN-Revision: 31546
2012-05-01 07:00:17 +00:00
Gabor Juhos cbfce53831 kernel: update linux 3.3 to 3.3.4
SVN-Revision: 31541
2012-04-30 08:38:11 +00:00
Gabor Juhos e931ffd678 linux: rtl836x: add a generic reset_switch function
SVN-Revision: 31536
2012-04-29 18:29:31 +00:00
Gabor Juhos 1d9400263f linux: rtl836x: rename rtl836*_hw_init to rtl836*_setup
SVN-Revision: 31535
2012-04-29 18:29:29 +00:00
Gabor Juhos badd7a3cf2 linux: rtl836x: add a reset_chip callback to rtl8366_smi_ops
SVN-Revision: 31534
2012-04-29 18:29:26 +00:00
Gabor Juhos 3e3a4d3d6b ar71xx: allow to disable link polling on unused PHYs
SVN-Revision: 31533
2012-04-29 18:29:24 +00:00
Gabor Juhos a8d3109208 rb532: remove 2.6.35 support
The generic 2.6.35 support has been remove long time ago.

SVN-Revision: 31532
2012-04-29 16:56:07 +00:00
Gabor Juhos 532b74ff7b linux/3.3: refresh patches
SVN-Revision: 31531
2012-04-29 16:56:03 +00:00
Gabor Juhos 27a1f6652a rdc: add 3.3 support
SVN-Revision: 31530
2012-04-29 15:59:49 +00:00
Gabor Juhos c59b60fa0b mpc85xx: add support for 3.3
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 31529
2012-04-29 15:55:28 +00:00
Gabor Juhos f687ca2296 orion: add 3.3 support
SVN-Revision: 31528
2012-04-29 15:20:40 +00:00
Gabor Juhos 923ebbac81 linux/3.3: yet another missing symbol
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 31527
2012-04-29 15:08:24 +00:00
Gabor Juhos 55fdc18beb linux/3.3: add support for the Pericom PT7C4338 I2C RTC chip
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 31525
2012-04-29 15:08:22 +00:00
Gabor Juhos f6d5998d31 mpc85xx: add kmod-booke-wdt to the default packages
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 31523
2012-04-29 15:00:38 +00:00
Gabor Juhos 296086868a mpc85xx: don't override CONFIG_WATHCDOG
SVN-Revision: 31521
2012-04-29 15:00:36 +00:00
Gabor Juhos 77735b5930 linux: move CONFIG_BOOKE_WDT to the generic config
SVN-Revision: 31520
2012-04-29 15:00:34 +00:00
Gabor Juhos 4fa9cf6c33 linux/2.6.36: R.I.P.
SVN-Revision: 31519
2012-04-29 15:00:33 +00:00
Gabor Juhos 3bc2afc384 linux: add broken flag to targets which are using 2.6.36
SVN-Revision: 31518
2012-04-29 15:00:32 +00:00
Gabor Juhos 417185b33c adm5120: create a new subtarget for the RB1xx devices
SVN-Revision: 31513
2012-04-29 07:36:46 +00:00
Gabor Juhos 7925eea45f adm5120: share a common kernel config between the subtargets
SVN-Revision: 31512
2012-04-29 07:36:44 +00:00
Gabor Juhos e96d52d198 adm5120: merge 3.3 patches
SVN-Revision: 31511
2012-04-29 07:36:43 +00:00
Gabor Juhos 19be4923e0 adm5120: remove 2.6.32 support
SVN-Revision: 31510
2012-04-29 07:36:37 +00:00
Gabor Juhos aa48f1326b adm5120: switch to 3.3.3
SVN-Revision: 31509
2012-04-29 07:36:36 +00:00
Gabor Juhos a1a0f67748 adm5120: fix macronix bootloc patch
SVN-Revision: 31508
2012-04-29 07:36:35 +00:00
Gabor Juhos 8e06682fb7 ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

SVN-Revision: 31507
2012-04-29 07:36:33 +00:00
Gabor Juhos 1a0ef04231 adm8668: merge 3.3 fixes
SVN-Revision: 31497
2012-04-28 10:41:43 +00:00
Gabor Juhos 87ae19eaa3 adm8668: nuke 2.6.36 support
SVN-Revision: 31496
2012-04-28 10:39:47 +00:00
Gabor Juhos 9a7e9e76a3 adm8668: switch to 3.3
SVN-Revision: 31495
2012-04-28 10:38:53 +00:00
Florian Fainelli e047cf1899 switch to gpio-keys-polled
SVN-Revision: 31491
2012-04-27 16:44:48 +00:00
Gabor Juhos af2b3518af linux/3.3: yet another missing symbol
SVN-Revision: 31488
2012-04-27 06:31:43 +00:00
Felix Fietkau 34ffb526a2 build: rework verbosity level selection
V=99 and V=1 are now deprecated in favor of a new verbosity class system,
though the old flags are still supported.
You can set the V variable on the command line (or OPENWRT_VERBOSE in the
environment) to one or more of the following characters:

- s: stdout+stderr (equal to the old V=99)
- c: commands (for build systems that suppress commands by default, e.g. kbuild)
- w: warnings/errors only (equal to the old V=1)

SVN-Revision: 31484
2012-04-26 17:53:56 +00:00