33c620773d
base-files: remove unnecessary early sysctl-hack
...
SVN-Revision: 36920
2013-06-11 14:10:45 +00:00
39469dea7f
boot: make use of kmodloader if it is available
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36428
2013-04-25 19:02:28 +00:00
f43b7934d2
make basefiles aware of procd
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36003
2013-03-13 18:11:19 +00:00
92ad26d1b6
base-files: Fix IPv6 early sysctls again * Kernel IPv6 /proc interface inconsistency caused races
...
SVN-Revision: 35417
2013-02-01 12:28:24 +00:00
ea7c9c85a8
base-files: Fix race-conditions with IPv6 sysctls
...
SVN-Revision: 35368
2013-01-29 10:13:33 +00:00
439a869090
Do not overload mount-call - trying to reduce confusion
...
The behaviour of calling 'mount' differed depending on whether it called
the busybox-mount, the mount of util-linux, the mount defined in
/lib/functions.sh and /lib/functions/boot.sh
/etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh,
both re-defining 'mount'.
SVN-Revision: 34792
2012-12-19 16:07:46 +00:00
9ae901445b
/etc/functions.sh => /lib/functions.sh
...
SVN-Revision: 32062
2012-06-05 16:04:23 +00:00
80650c9475
base-files: wait for wifi modules to settle
...
On slower devices wifi drivers might take too long for detecting
devices, resulting in the wifi detect call not seeing them.
This was observed on a bcm6348 with bcm4318 wifi. Adding a one second
pause was enough for b43 to expose the device.
SVN-Revision: 31639
2012-05-06 21:25:42 +00:00
5744d736f2
base-files: remove old coldplugging hacks that are no longer necessary since the new main hotplug2 instance calls udevtrigger as well
...
SVN-Revision: 30916
2012-03-13 09:18:30 +00:00
a963a80a38
base-files: the initial hotplug2 instance sometimes misses a few relevant events, e.g. during module load. rerun udevtrigger for the final hotplug2 instance to fix this
...
SVN-Revision: 29862
2012-01-22 21:14:22 +00:00
9fd3886365
base-files: do not pass --set-worker /lib/hotplug2/worker_fork.so to hotplug2 anymore, its statically linked - patch by Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
...
SVN-Revision: 29806
2012-01-19 15:37:47 +00:00
33443d2a8c
base-files: now that we have date -k, adjust the kernel timezone after setting up TZ and localtime
...
SVN-Revision: 29204
2011-11-17 01:18:22 +00:00
93886bc776
package/base-files: use new service wrapper
...
SVN-Revision: 28835
2011-11-07 22:58:34 +00:00
44ba13b578
base-files: load modules early, run wifi detect afterwards and only then process uci defaults
...
this allows uci-defaults scripts to override wifi settings
SVN-Revision: 28733
2011-11-03 20:02:25 +00:00
bfbbe5893f
base-files: use "zonename" system option to symlink /etc/localtime via /tmp/localtime to /usr/share/zoneinfo for glibc and eglibc
...
SVN-Revision: 28306
2011-09-26 02:28:04 +00:00
32731a72c2
base-files: pass conloglevel to syslogd ( #9463 , #9647 )
...
SVN-Revision: 27400
2011-07-03 15:11:58 +00:00
ba1c1e9016
base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others ( #9352 )
...
SVN-Revision: 26848
2011-05-08 10:25:58 +00:00
980190367c
base-files: Use -h instead of deprecated -L for symlink check
...
SVN-Revision: 26485
2011-04-05 15:09:43 +00:00
48465d3d63
base-files: fix minor problem in init.d/boot
...
The script tests for the existance of /dev/root with test -e which fails if
/dev/root is a dangling symlink making the call to ln fail.
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>
SVN-Revision: 26483
2011-04-05 15:09:32 +00:00
541725ce18
stop syslogd before rebooting, otherwise umount might not work properly when logging to a file (thx, puchu)
...
SVN-Revision: 19428
2010-01-30 18:17:52 +00:00
889532d1fd
do not start multiple subshells for applying /etc/uci-defaults. use sh -x for hush compatibility
...
SVN-Revision: 18717
2009-12-09 15:15:25 +00:00
e39038f688
mount debugfs by default
...
SVN-Revision: 18502
2009-11-23 20:35:05 +00:00
4c47562a37
extend logging functions
...
SVN-Revision: 17514
2009-09-04 21:09:13 +00:00
2892e2f1d5
base-files: port init.d/boot to new config_get
...
... and localize some variables.
Signed-off-by: Malte S. Stretz <mss@apache.org>
SVN-Revision: 17157
2009-08-07 00:07:51 +00:00
9b5e65f101
base-files: set rules file for hotplug2 in the boot script ( closes #5235 )
...
SVN-Revision: 16215
2009-05-30 17:09:41 +00:00
463a6f4bda
base-files: update command line for the new hotplug2
...
SVN-Revision: 16154
2009-05-28 18:48:54 +00:00
cbd52550bd
rcS: wait for init scripts to complete before initiating the shutdown (patch from #5032 )
...
SVN-Revision: 15530
2009-04-30 22:59:18 +00:00
088ea2fb6e
Support configurations without syslogd/klogd.
...
SVN-Revision: 14937
2009-03-18 12:20:21 +00:00
1716050f0c
allow specifying port where to log ( #2019 )
...
SVN-Revision: 14396
2009-02-03 20:26:00 +00:00
341c1dbdf5
package/base-files: fix chmod of /tmp/.uci, bump package revision
...
SVN-Revision: 13903
2009-01-06 21:53:45 +00:00
2176ae1a6f
fix a race condition which would leave dnsmasq in infinite resolving recursion nirvana
...
SVN-Revision: 12424
2008-08-28 14:10:55 +00:00
37c7e13a5f
move the hotplug2 kill command from preinit to /etc/init.d/boot, so that it works for initramfs as well
...
SVN-Revision: 12058
2008-08-01 03:01:42 +00:00
0b5f602421
Revert previous bad commit r11512
...
SVN-Revision: 11513
2008-06-16 19:37:00 +00:00
5ee48c0b00
Add the PS3 specific utility bl-option, a helper sctipt to get and set bootloader options in flash memory.
...
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
SVN-Revision: 11512
2008-06-16 19:14:13 +00:00
0bf765b362
system now knows which timezone it is in
...
SVN-Revision: 11445
2008-06-11 19:59:16 +00:00
6d4c89c7f5
adding check for /proc/net/vlan/config (==vlan enabled kernel)
...
SVN-Revision: 11132
2008-05-13 09:21:17 +00:00
8d30372bdc
Make the syslog ring-buffer size configurable ( #3204 )
...
SVN-Revision: 10557
2008-03-07 10:44:13 +00:00
0cf1a58282
Here comes the new UCI. Enjoy :)
...
SVN-Revision: 10367
2008-02-03 06:48:15 +00:00
b443ee0fbb
init: don't start hotplug2 if it doesn't exist
...
The current init script always tries to start hotplug 2, even if
it's not present, so we get an error on boot.
This change checks for the presence of the hotplug2 binary before
trying to start it.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
SVN-Revision: 9606
2007-11-28 02:36:10 +00:00
ca32501abe
add --no-coldplug to the hotplug2 process started by /etc/init.d/boot - should prevent duplicate ifup actions. thx, ffrrrr.
...
SVN-Revision: 8864
2007-09-20 10:19:24 +00:00
f95db8bac8
fix a warning ( #1800 )
...
SVN-Revision: 7809
2007-06-30 20:00:29 +00:00
c09dc20f2c
replace the hotplug2 fork handling hack with a better solution implemented in upstream (thanks, iSteve)
...
SVN-Revision: 7786
2007-06-30 11:05:14 +00:00
8c41e51e92
fix failsafe on broadcom, send netlink events in diag when running linux 2.6
...
SVN-Revision: 7722
2007-06-25 08:32:25 +00:00
4f16e9cc3e
keep track of the network interface states (stored in uci format in /var/state/network, overlay over /etc/config/network)
...
SVN-Revision: 7643
2007-06-16 00:01:33 +00:00
440f537f48
Add the conloglevel option ( #1682 )
...
SVN-Revision: 7613
2007-06-13 17:41:54 +00:00
fa0568fdcb
move syslogd and klogd to init.di/boot script, add remote logging support
...
SVN-Revision: 7160
2007-05-10 09:29:55 +00:00
76184df0e6
fix networking on broadcom and possibly other targets as well ( #1658 )
...
SVN-Revision: 7149
2007-05-09 20:54:41 +00:00
ca7a815602
use hotplug2 for serializing hotplug events on 2.6
...
SVN-Revision: 7097
2007-05-05 18:33:18 +00:00
9507f89800
create /dev/root on boot - fixes cf2nand on rb532
...
SVN-Revision: 7066
2007-04-29 16:57:55 +00:00
65113c481f
we can use some more hotplug processes here...
...
SVN-Revision: 6980
2007-04-16 23:58:46 +00:00
Steven Barth
John Crispin
Mirko Vogt
Jo-Philipp Wich
Jonas Gorski
Felix Fietkau
Nicolas Thill
Vasilis Tsiligiannis
Travis Kemen
Gabor Juhos
Michael Büsch
Florian Fainelli
Yuji Mano
Ralph Hempel
Mike Baker