cdfc300948
ar71xx: remove superfluous USB patches for 3.3
...
SVN-Revision: 34643
2012-12-12 16:49:43 +00:00
b0b994cf76
ar71xx: set pad6 cfg for AR8327 on the AP136 board
...
Also override the pll_1000 value. Without these settings
ethernet suffers from packet loss.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34316
2012-11-23 20:55:34 +00:00
188908e885
ar71xx: make rb750_nand driver compatible with 3.7
...
Also add compatibility patches for the currently
supported kernels.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34279
2012-11-20 16:29:43 +00:00
8194237789
ar71xx: make ar934x_nfc driver compatible with 3.7
...
Also add compatibility patches for the currently
supported kernels.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34278
2012-11-20 16:29:42 +00:00
4468fd7ae4
ar71xx: refresh rb4xx_nand patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34277
2012-11-20 15:53:17 +00:00
674b91ce0e
ar71xx: fix GPIO function selection for AR934x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34275
2012-11-20 14:27:17 +00:00
d44d954dec
ar71xx: add kernel support for the RB435G board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34239
2012-11-18 10:18:01 +00:00
8d4857d677
ar71xx: add kernel support for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34231
2012-11-18 09:32:33 +00:00
75c1d3ccc2
ar71xx: add support for the Ubiquiti UniFi AP-Outdoor device
...
[juhosg:
- rename and refresh 660-MIPS-ath79-ubnt-xm-add-unifi-outdoor patches
- wrap long lines in mach-ubnt-xm
- remove default network config, set it from uci-defaults/network
instead
- remove user-space, and image generation stuff]
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34196
2012-11-13 20:57:17 +00:00
91bab828aa
ar71xx: add support for TP-Link TL-WA7510N
...
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.
http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n
[juhosg:
- cleanup commit message
- move non kernel related stuff into separate changes
- rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
- merge WA7510N support into the mach-tl-wa901nd.c file
- add 3.6 support]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34187
2012-11-13 14:48:00 +00:00
ce9d4fadfa
ar71xx: refresh patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34186
2012-11-13 14:47:58 +00:00
e92da5e7ae
ar71xx: nuke ath79_set_usb_power_gpio helper
...
It is no longer used.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34088
2012-11-05 13:23:28 +00:00
b78a736dc2
ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards
...
Also add the missing ATH79_MACH_ZCN_1523H_5 symbol.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34072
2012-11-04 20:15:18 +00:00
a6549ac1cb
ar71xx: remove NO_AUTOINCR flag from the NAND drivers
...
The flag is not present in 3.6.
Also add compatibility patches for 3.3.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33971
2012-10-28 12:21:15 +00:00
e2ec99889e
ar71xx: ag71xx: fix build_skb arguments for 3.6
...
Also add a compatibility patch for 3.3
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33969
2012-10-27 17:11:06 +00:00
d54c9653e9
ar71xx: add support for the Senao CAP4200AG board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33956
2012-10-27 08:55:38 +00:00
3b7cb4eb4a
ar71xx: add ath79_wmac_disable_[25]ghz helpers
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33955
2012-10-27 08:55:37 +00:00
7a72f01a72
ar71xx: merge machine support patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33820
2012-10-17 18:27:50 +00:00
2e1bc1e15b
ar71xx: also use the ath79_set_ar934x_eth_cfg helper for DB120
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33819
2012-10-17 18:27:48 +00:00
c5a32cfc92
ar71xx: add support for the OpenMesh OM2P-HS board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33800
2012-10-17 08:26:01 +00:00
196c6c5b45
ar71xx: add support for the TL-WR841N/ND v8 board
...
SVN-Revision: 33621
2012-10-04 20:16:03 +00:00
e70ad61e44
ar71xx: use different machtype and setup for the TL-MR3040
...
Should fix #12211 . Compile tested only.
SVN-Revision: 33535
2012-09-24 18:45:56 +00:00
9a11f882d7
ar71xx: revert DIR-825-B1 wholeflash image support.
...
It should be implemmented in a cleaner way.
This reverts the following commits:
[ar71xx] dir-825-b1: Fix wholeflash images
[ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash"
SVN-Revision: 33459
2012-09-18 14:30:57 +00:00
a7c5c4390a
ar71xx: register the NAND flash controller device on DB120
...
SVN-Revision: 33455
2012-09-17 20:30:57 +00:00
0f254b4b67
dir-825-b1: Fix wholeflash images: Attempting to flash a wholeflash (-openwrt) image from the normal image would brick (but recoverable via emergency flash) the router if the wholeflash image was larger than the maximum size for a normal image. First we rename the -openwrt images to -wholeflash since -openwrt is really too generic. We also revert the changes to the regular dir-825-b1 image, which now is the same as before, but add a -towholeflash image which is almost the same as the regular dir-825-b1 image, but copies caldata to new location and allows flashing of images that use the full flash (except u-boot, u-boot-env, and caldata paritition space) (these are the -wholeflash images).
...
SVN-Revision: 33447
2012-09-17 14:17:12 +00:00
e8893fdf7a
ar71xx: add missing code for ar933x WMAC reset that was left out during the ar71xx->ath79 migration, should fix wifi stability issues on ar933x
...
SVN-Revision: 33446
2012-09-17 11:17:29 +00:00
61dc6e65c0
ar71xx: merge machine support patches
...
SVN-Revision: 33389
2012-09-13 07:26:28 +00:00
5804b9d1b7
ar71xx: register the NAND controller device on the RB2011
...
SVN-Revision: 33388
2012-09-13 07:26:26 +00:00
4fd67c3cd4
ar71xx: add device registration code for the AR934x NAND flash controller
...
SVN-Revision: 33387
2012-09-13 07:26:25 +00:00
1e5fdbeae5
ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x
...
SVN-Revision: 33385
2012-09-13 07:26:22 +00:00
40a5f5c16e
ar71xx: define NAND controller base address and register size for AR934X/QCA955x
...
SVN-Revision: 33382
2012-09-12 19:06:38 +00:00
4ee5b528de
ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on QCA955x
...
SVN-Revision: 33362
2012-09-10 14:38:01 +00:00
2e0e38ad69
ar71xx: fix QCA955X_EHCI_SIZE
...
SVN-Revision: 33360
2012-09-10 14:32:54 +00:00
aa2f4d4c8d
ar71xx: add initial support for RB2011UAS-2HnD
...
SVN-Revision: 33349
2012-09-09 14:05:32 +00:00
3686e18727
ar71xx: use routerboot_find_tag to find wlan data offset on RB751
...
SVN-Revision: 33348
2012-09-09 14:05:30 +00:00
ccabe4a1b4
ar71xx: add RouterBoot related helper routines
...
SVN-Revision: 33347
2012-09-09 14:05:28 +00:00
6ae5ec16e0
ar71xx: add preliminary support for Mikrotik RB2011L
...
This patch adds preliminary support for the Mikrotik RB2011L.
The NAND flash is not yet supported, so only the initramfs
kernel can be used for now.
[juhosg: remove unnecessary PCI/USB related stuff, the board
does not use that, update commit message]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 33344
2012-09-09 14:05:22 +00:00
94bac7366c
ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x
...
SVN-Revision: 33343
2012-09-09 14:05:20 +00:00
88a5478781
ar71xx: use the RLE library for RB751
...
SVN-Revision: 33338
2012-09-08 17:51:56 +00:00
73df240bb3
ar71xx: add library code for RLE decoding
...
It will be used for the MikroTik boards.
SVN-Revision: 33337
2012-09-08 17:51:54 +00:00
f4be8a76de
ar71xx: fix CPU/DDR frequency calculation for SRIF PLLs on AR934x
...
SVN-Revision: 33335
2012-09-08 13:39:09 +00:00
70d00ac64e
ar71xx: refresh kernel patches
...
SVN-Revision: 33334
2012-09-08 13:39:04 +00:00
c3b7139ab2
dir825b1: Add image for DIR-825-B1 that uses the whole flash (must first be flashed with the 'standard' image) and an image to revert the change to allow reversion to stock firmware.
...
SVN-Revision: 33326
2012-09-06 18:15:26 +00:00
069f544d2b
ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on AR934x
...
SVN-Revision: 33318
2012-09-05 19:26:50 +00:00
eebdd633e4
ar71xx: add support for the Allnet ALL0315N board
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33281
2012-08-27 14:55:31 +00:00
8b3d95bba9
ar71xx: add support for the TRENDnet TEW-712BR board
...
SVN-Revision: 33231
2012-08-22 20:09:13 +00:00
4073317695
ar71xx: fix serial clock calculation on AR933x
...
Closes #12031 .
SVN-Revision: 33230
2012-08-22 19:11:10 +00:00
5a694e09c8
ar71xx: add ALL0305 board alias
...
For the pure convenience of having a correctly named
image and system name in /proc/cpuinfo , until we can
do that by having system names in DTS...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33224
2012-08-22 12:33:22 +00:00
0517183b9c
ar71xx: add support for TP-Link TL-WDR3600
...
The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has
only two antennas.
[juhosg: remove the custom machine type, change the board name instead]
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 33219
2012-08-22 09:43:18 +00:00
e320a7e649
ar71xx: simplify misc IRQ handling
...
SVN-Revision: 32948
2012-08-02 11:25:49 +00:00
Gabor Juhos
Daniel Dickinson
Felix Fietkau