4d66b749de
cns3xxx: fix coding style in board script
...
SVN-Revision: 34113
2012-11-07 23:12:06 +00:00
6090ddc896
adds fon20n profile
...
SVN-Revision: 34112
2012-11-07 20:26:31 +00:00
3991526989
ramips: use kernel 3.6.6
...
## Booting image at 80800000 ...
Image Name: MIPS OpenWrt Linux-3.6.6
Created: 2012-11-06 14:19:54 UTC
System Control Status = 0x20440000
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 3560768 Bytes = 3.4 MB
Load Address: 80000000
Entry Point: 80000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32
Starting kernel ...
[ 0.000000] Linux version 3.6.6 (daniel@localhost.localdomain ) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[ 0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Writing ErrCtl register=0000c388
[ 0.000000] Readback ErrCtl register=0000c388
[ 0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:48
[ 0.000000] console [ttyS1] enabled, bootconsole disabled
[ 0.000000] console [ttyS1] enabled, bootconsole disabled
[ 0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[ 0.090000] pid_max: default: 32768 minimum: 301
[ 0.100000] Mount-cache hash table entries: 512
[ 0.110000] NET: Registered protocol family 16
[ 0.120000] MIPS: machine is Allnet ALL0239-3G
[ 0.140000] bio: create slab <bio-0> at 0
[ 0.150000] Switching to clocksource MIPS
[ 0.160000] NET: Registered protocol family 2
[ 0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.210000] TCP: reno registered
[ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.240000] NET: Registered protocol family 1
[ 5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 5.490000] msgmni has been set to 52
[ 5.500000] io scheduler noop registered
[ 5.510000] io scheduler deadline registered (default)
[ 5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[ 5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[ 5.560000] physmap platform flash device: 00800000 at bf000000
[ 5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[ 5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[ 5.610000] Amd/Fujitsu Extended Query version 1.3.
[ 5.620000] number of CFI chips: 1
[ 5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[ 5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[ 5.650000] 0x000000000000-0x000000030000 : "u-boot"
[ 5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[ 5.680000] 0x000000040000-0x000000050000 : "factory"
[ 5.690000] 0x000000050000-0x000000130000 : "kernel"
[ 5.700000] 0x000000130000-0x000000800000 : "rootfs"
[ 5.710000] mtd: partition "rootfs" set to be root filesystem
[ 5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[ 5.740000] 0x000000050000-0x000000800000 : "firmware"
[ 5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[ 5.780000] TCP: cubic registered
[ 5.780000] NET: Registered protocol family 17
[ 5.790000] 8021q: 802.1Q VLAN Support v1.8
[ 5.820000] Freeing unused kernel memory: 2676k freed
[ 6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -
Please press Enter to activate this console. [ 10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[ 10.170000] Backport based on wireless-testing.git master-2012-09-07
[ 10.180000] compat.git: wireless-testing.git
[ 10.210000] cfg80211: Calling CRDA to update world regulatory domain
[ 10.230000] cfg80211: World regulatory domain updated:
[ 10.240000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.250000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.270000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.280000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.300000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.430000] NET: Registered protocol family 10
[ 10.760000] PPP generic driver version 2.4.2
[ 10.820000] l2tp_core: L2TP core driver, V2.0
[ 10.840000] l2tp_netlink: L2TP netlink interface
[ 10.870000] sit: IPv6 over IPv4 tunneling driver
[ 10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.060000] NET: Registered protocol family 24
[ 11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[ 11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.510000] device eth0.1 entered promiscuous mode
[ 14.520000] device eth0 entered promiscuous mode
[ 14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 14.550000] br-lan: port 1(eth0.1) entered forwarding state
[ 14.560000] br-lan: port 1(eth0.1) entered forwarding state
[ 16.560000] br-lan: port 1(eth0.1) entered forwarding state
[ 16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33
BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r34079)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:/#
SVN-Revision: 34111
2012-11-07 20:26:21 +00:00
480892226d
ramips: add HAVE_CLK to Kconfig on all ramips socs
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 34110
2012-11-07 20:26:04 +00:00
feb31be6af
ramips: add linux-3.6 configuration for ramips socs
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
create mode 100644 target/linux/ramips/rt288x/config-3.6
create mode 100644 target/linux/ramips/rt305x/config-3.6
create mode 100644 target/linux/ramips/rt3883/config-3.6
SVN-Revision: 34109
2012-11-07 20:25:55 +00:00
ca1fcaed5b
ramips: port patches to linux-3.6
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch
create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch
create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch
create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch
create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch
create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch
create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch
create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch
create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch
create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch
create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch
create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch
SVN-Revision: 34108
2012-11-07 20:25:34 +00:00
f2bb7754f5
bcm63xx: Enable endian check support for ath9k pci fixup.
...
Some ath9k caldatas need to be "endian checked".
This patch allows selecting wether to enable endian check or not.
Endian check is disabled by default.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34105
2012-11-07 09:01:03 +00:00
f2b75b517b
fixup typos in the compex patch
...
SVN-Revision: 34104
2012-11-07 07:51:24 +00:00
a50d121d8e
linux: export bcm963xx_tag.h to userspace
...
Export bcm963xx_tag.h so mtd can use it without using kernel includes.
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
[jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header
from original location, refresh patches, use a more matching patch
number, port to 3.6]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 34103
2012-11-06 15:21:46 +00:00
865933a0ec
cns3xxx: refresh kernel config file
...
SVN-Revision: 34102
2012-11-06 11:16:43 +00:00
9a5c26d4ef
cns3xxx: use files directory
...
SVN-Revision: 34101
2012-11-06 11:16:41 +00:00
7404e59bbd
add OWRTDTB marker patch
...
SVN-Revision: 34100
2012-11-06 10:39:43 +00:00
3a1851964e
add support for arv7525
...
SVN-Revision: 34097
2012-11-06 07:38:24 +00:00
e141cbb0f9
refresh patches
...
SVN-Revision: 34095
2012-11-06 05:45:12 +00:00
1a9dfd566e
add default packages
...
SVN-Revision: 34094
2012-11-06 05:39:08 +00:00
0722fd9c63
linux: generic: fix split_squashfs for 3.6
...
_read expects the retlen to be initialized to zero, which the mtd_read
helper does. So fix it by using mtd_read instead of calling _read directly.
SVN-Revision: 34093
2012-11-06 00:48:21 +00:00
5bc7d81a20
bcm63xx: fix SPW303V images
...
SPW303V also needs its CRC fixed up since increasing the image size to
4MB to prevent the dual image mode of CFE.
SVN-Revision: 34091
2012-11-05 22:50:29 +00:00
e92da5e7ae
ar71xx: nuke ath79_set_usb_power_gpio helper
...
It is no longer used.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34088
2012-11-05 13:23:28 +00:00
f2528b1792
ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34087
2012-11-05 13:23:27 +00:00
e8669729bc
kernel: update linux 3.6 to 3.6.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34086
2012-11-05 13:22:09 +00:00
d822ecfdf8
use the mainline machname for the compex boards
...
SVN-Revision: 34083
2012-11-05 11:38:23 +00:00
a0dd47bbed
ramips: enable USB power on the DIR-645
...
Closes #12422 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34082
2012-11-05 11:04:45 +00:00
5e43b934fd
linux/3.3: backport an upstream GPIO patch
...
The backported patch introduces new flags to
automatically export GPIOs when using the
convenience unctions gpio_request_one() or
gpio_request_array().
This will be used by ar71xx/ramips platforms.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34081
2012-11-05 11:04:43 +00:00
829aaedcbf
ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 34078
2012-11-05 06:58:53 +00:00
ed35253f4c
ar71xx: don't use the unknown LED on the ZCN-1523-5 board
...
According to #12421 , GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.
If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34076
2012-11-04 22:08:54 +00:00
1b744e1ca5
ar71xx: include mtd layout in the command line for ZCN-1523H-* boards
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34074
2012-11-04 21:12:20 +00:00
b78a736dc2
ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards
...
Also add the missing ATH79_MACH_ZCN_1523H_5 symbol.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34072
2012-11-04 20:15:18 +00:00
6040b1d29a
linux-3.6: fix portability of some includes files in tools/ used on the host
...
SVN-Revision: 34068
2012-11-04 17:01:15 +00:00
05fbb370dc
3.6 is not the default yet
...
SVN-Revision: 34065
2012-11-03 13:29:44 +00:00
a9ad36b7f1
adds dts files and make devicetree images buildable
...
SVN-Revision: 34064
2012-11-02 20:07:47 +00:00
c8ae6dac56
update ase target for 3.6
...
SVN-Revision: 34063
2012-11-02 20:07:41 +00:00
dc8641f7fa
add subtarget, as of 3.6 we dont seperate xway SoC
...
SVN-Revision: 34062
2012-11-02 20:07:36 +00:00
dd619da4fc
adds 3.6 files, patches and config
...
SVN-Revision: 34061
2012-11-02 20:07:26 +00:00
736835343c
move files/ -> files-3.3/
...
SVN-Revision: 34060
2012-11-02 20:07:02 +00:00
fa316620a7
prepare Makefile for 3.6
...
SVN-Revision: 34059
2012-11-02 20:06:51 +00:00
0005762690
generic: make yaffs work on 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34054
2012-11-01 11:07:23 +00:00
ffcb4b0fe1
generic: rename jffs2 patches
...
Make room for the upcoming yaffs patches.
No functional changes.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34053
2012-11-01 11:07:16 +00:00
7e0f8049fa
Fix feeds.conf.default when no SVN info present
...
SVN-Revision: 34051
2012-11-01 07:15:49 +00:00
6c8c3ee77d
generic: use mtd_* helpers in the yaffs code
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34046
2012-10-31 21:17:30 +00:00
3c12bad276
move PCIe init to subsys init call
...
ARM Linux PCI/PCIe hardware intialization needs to occur before device_init
as it does not support hotplug. I have modeled the cns3xxx PCIe init after
other ARM platforms. Registering it early resolves resource issues occuring
during bus enumeration that occur when a device driver is linked static in
the kernel.
Instead of passing in a bitmask to enable the 2 available ports, link detect
is used to enable ports that have a valid link.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 34044
2012-10-31 20:16:53 +00:00
07a762c4c5
kernel: update linux 3.6 to 3.6.5
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34042
2012-10-31 20:09:39 +00:00
a4126685c6
generic: split yaffs-3.2-fix patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34041
2012-10-31 19:33:12 +00:00
4baeb543f0
generic: replace yaffs-2.6.39 patch
...
Use backported upstream patches instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34032
2012-10-31 15:12:45 +00:00
b888c2deab
generic: replace yaffs mutex_fix patch
...
Use a backported patch instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34021
2012-10-30 21:16:24 +00:00
d54782d01a
generic: replace yaffs symlink fix patch
...
Use a backported patch instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34020
2012-10-30 21:16:23 +00:00
9a8ccc1a08
generic: rename yaffs patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34019
2012-10-30 21:16:21 +00:00
e14e4306c9
set earlyprintk UART to be the default Realview UART
...
SVN-Revision: 34015
2012-10-30 16:56:10 +00:00
449f88df0f
generic: fold yaffs_git_2010_10_20 patch to generic/files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34013
2012-10-30 14:58:17 +00:00
56190ed0fc
generic: fold yaffs_cvs_2009_04_24 patch to generic/files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34012
2012-10-30 14:58:13 +00:00
7228a91a3b
ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards
...
The default pll_1000 value had to be changed
in order to make it working.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33993
2012-10-29 17:24:30 +00:00
e91dc2e5b3
target: refresh all target configs with kconfig.pl
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33987
2012-10-29 10:11:05 +00:00
c0c69c974f
add missing 3.6 symbols
...
SVN-Revision: 33986
2012-10-29 10:00:02 +00:00
8e49dfe68a
the uImage's filename will hardly change
...
SVN-Revision: 33985
2012-10-29 09:55:20 +00:00
f7b2089704
generic: add more symbols for 3.6
...
Also refresh the config file with kconfig.pl.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33984
2012-10-29 09:08:59 +00:00
e4db63fd64
ar71xx: add initial support for 3.6
...
The nand subtarget is not working yet.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33983
2012-10-28 19:52:02 +00:00
87186c5ed4
kernel: update linux 3.6 to 3.6.4
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33982
2012-10-28 18:59:39 +00:00
a6549ac1cb
ar71xx: remove NO_AUTOINCR flag from the NAND drivers
...
The flag is not present in 3.6.
Also add compatibility patches for 3.3.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33971
2012-10-28 12:21:15 +00:00
9a37cf7ec6
generic: fix crashlog patch for 3.6
...
kmsg_dump() uses an iterator to receive log buffer
content since 3.5. Change the 'crashlog_do_dump'
function in order to make it compatible with the
new version.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33970
2012-10-28 09:50:50 +00:00
e2ec99889e
ar71xx: ag71xx: fix build_skb arguments for 3.6
...
Also add a compatibility patch for 3.3
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33969
2012-10-27 17:11:06 +00:00
7640a7cc24
generic: fix tcp_window_check patch for 3.6
...
Move the new entry to the end of the tcp_sysctl_table
array to fix the following error:
[ 7.670000] sysctl table check failed: net/netfilter/nf_conntrack_tcp_max_retrans No data
[ 7.680000] Call Trace:
[ 7.680000] [<80273bc4>] dump_stack+0x8/0x34
[ 7.680000] [<80128710>] __register_sysctl_table+0x374/0x3a8
[ 7.690000] [<868d5034>] nf_conntrack_l4proto_unregister+0x158/0x1a0[nf_conntrack]
[ 7.700000] [<868d50e4>] nf_conntrack_l4proto_register+0x68/0x21c[nf_conntrack]
[ 7.710000] [<868b237c>] need_ipv4_conntrack+0x35c/0xb60[nf_conntrack_ipv4]
[ 7.710000]
[ 7.720000] nf_conntrack_l4proto_tcp4 :protocol register failed
[ 7.720000] nf_conntrack_ipv4: can't register pernet ops
[ 7.780000] nf_nat: Unknown symbol nf_nat_seq_adjust_hook (err 0)
[ 7.790000] nf_nat: Unknown symbol need_ipv4_conntrack (err 0)
[ 7.800000] iptable_nat: Unknown symbol nf_nat_packet (err 0)
[ 7.810000] iptable_nat: Unknown symbol nf_nat_setup_info (err 0)
[ 7.820000] iptable_nat: Unknown symbol nf_nat_icmp_reply_translation (err 0)
[ 7.820000] iptable_nat: Unknown symbol need_ipv4_conntrack (err 0)
[ 7.840000] ipt_MASQUERADE: Unknown symbol nf_nat_setup_info (err 0)
[ 7.860000] nf_nat_ftp: Unknown symbol nf_nat_follow_master (err 0)
[ 7.870000] nf_nat_ftp: Unknown symbol __nf_nat_mangle_tcp_packet (err 0)
[ 7.890000] nf_nat_irc: Unknown symbol nf_nat_follow_master (err 0)
[ 7.900000] nf_nat_irc: Unknown symbol __nf_nat_mangle_tcp_packet (err 0)
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33968
2012-10-27 15:42:25 +00:00
50be09e1f7
instead of updating the whole file, just add the additional boards
...
SVN-Revision: 33966
2012-10-27 13:29:36 +00:00
1a4f117398
rename erase size variables
...
SVN-Revision: 33964
2012-10-27 10:50:55 +00:00
549d5a6e34
add support for Netgear WN802T
...
SVN-Revision: 33963
2012-10-27 10:48:22 +00:00
cf7aed0a76
don't enforce rootfs location
...
SVN-Revision: 33962
2012-10-27 10:43:47 +00:00
702fd5cdb5
generate images for the D-Link DWL-3150 as well
...
SVN-Revision: 33961
2012-10-27 09:42:58 +00:00
3a86affcdd
ar71xx: enable sysupgrade for the CAP4200AG board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33960
2012-10-27 08:55:42 +00:00
e99d557c08
ar71xx: add profile and build image for the CAP4200AG
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33958
2012-10-27 08:55:40 +00:00
9287e0c863
ar71xx: add user-space part for the CAP4200AG
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33957
2012-10-27 08:55:39 +00:00
d54c9653e9
ar71xx: add support for the Senao CAP4200AG board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33956
2012-10-27 08:55:38 +00:00
3b7cb4eb4a
ar71xx: add ath79_wmac_disable_[25]ghz helpers
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33955
2012-10-27 08:55:37 +00:00
e8fc46b7c5
generic: allow to disable [25]GHz support in ath9k via platform data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33954
2012-10-27 08:55:36 +00:00
c92998f9d9
generic: use mtd_read in myloader parser
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33952
2012-10-27 07:57:59 +00:00
269872fe1e
ar71xx: use mtd_read in wrt160nl_part
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33951
2012-10-27 07:57:58 +00:00
973eda6077
ar71xx: use mtd_read in tplinkpart
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33950
2012-10-27 07:57:57 +00:00
28f3adc2ed
ar71xx: generate 4,8,16M images for the WPE72
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33949
2012-10-27 07:57:55 +00:00
ee9376d153
generic: swconfig: use led_set_brightness in LED control code
...
The 'led_brightness_set' function has
been renamed to 'led_set_brightness'
in recent ernels. Use the new name and
add a compatibility patch for 3.3.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33946
2012-10-26 18:58:18 +00:00
1127781d40
generic: add missing symbols for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33945
2012-10-26 18:58:15 +00:00
ff481a5518
ar71xx: reject TP-Link images containing a bootloader
...
The original TP-Link firmware images can be flashed via
the sysupgrade command, however those may contain a
bootloader. Flashing such an image via sysupgrade
bricks the board, and it can't be recovered without
a serial console.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33944
2012-10-26 18:58:13 +00:00
db5eea6acd
ramips: use correct key code for the RFKILL switch on the TEW-691GR
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33943
2012-10-26 18:53:44 +00:00
c691d165c7
add 3.6 kernel configuration
...
SVN-Revision: 33942
2012-10-26 15:24:19 +00:00
9af90aa80c
add missing 6345 clock bits patch to 3.6 patches
...
SVN-Revision: 33941
2012-10-26 15:24:14 +00:00
fad6afdf06
add some more 3.6 config symbols
...
SVN-Revision: 33940
2012-10-26 15:24:10 +00:00
8d69af7c9f
add preliminary support for 3.6 kernel
...
SVN-Revision: 33936
2012-10-25 21:16:51 +00:00
6a699a8ae8
brcm47xx: check for .ELF header in partition parser
...
The image format for the wgt634u is different from the normal format.
Without this patch the partition parser detects a 128kb bigger
partition after every update.
This closes #11420
Thank you b.sander for the patch.
SVN-Revision: 33935
2012-10-25 19:49:20 +00:00
d4ef5de604
kernel: add PCI id 14e4:4350 to ssb
...
* 14e4:4350 is found on a Broadcom BCM43222.
* remove some warnings when using a BCM43222.
SVN-Revision: 33929
2012-10-25 15:50:47 +00:00
1e2962e63c
kernel: add a few missing config symbols for x86. added to generic config because of dependencies, so that kernel_menuconfig does not remove them again
...
SVN-Revision: 33923
2012-10-25 15:11:45 +00:00
5591188ac3
kernel: refresh config files using kconfig.pl
...
SVN-Revision: 33922
2012-10-25 15:11:40 +00:00
dca633f1c8
kernel: update bcma and ssb to master-2012-10-18 from wireless-testing
...
* update the flash driver for bcm47xx to use the stubs already in bcma
* do some misc enhancements to the flash drivers for bcm47xx
SVN-Revision: 33920
2012-10-25 14:33:47 +00:00
dea2da55df
fix Ethernet DMA for 636x and 6328 after r33916
...
SVN-Revision: 33918
2012-10-25 11:54:41 +00:00
917670922b
add support for the Dynalink RTA770BW board
...
This board id is used by the Siemens Gigaset SE515 router.
SVN-Revision: 33917
2012-10-24 21:25:22 +00:00
bdfcbb8bee
make BCM6345 Ethernet DMA changes runtime checks
...
The semantics of the DMA engine are identical, we just have a couple of
special case handling.
SVN-Revision: 33916
2012-10-24 21:25:10 +00:00
df6f9072ab
ARM: fix XZ decompressor stub build failure on strstr()
...
SVN-Revision: 33915
2012-10-24 15:57:31 +00:00
b5c27880ee
fixup generic 3.6 kernel config
...
It was not meant to be committed as-is in r33911
SVN-Revision: 33914
2012-10-24 15:57:24 +00:00
a6bfca90b0
fix IFF_NO_IP_ALIGN bitmask to contain only 1 bit set
...
This issue got introduced while porting the patch over 3.6 in r33897
SVN-Revision: 33913
2012-10-24 13:23:20 +00:00
7e856e5a97
make all 3.6 patches apply and build
...
SVN-Revision: 33911
2012-10-24 13:05:22 +00:00
4afb91a12f
swconfig: get rid of the NLA_PUT_* macros
...
Upstream kernel 3.6 has removed this usage, use the plain functions directly as
intended.
SVN-Revision: 33906
2012-10-24 13:05:04 +00:00
f600ec5b3b
x86: allow both old and new grub signatures in sysupgrade
...
SVN-Revision: 33898
2012-10-23 16:34:00 +00:00
949b46d13d
linux 3.6 support (work in progress)
...
SVN-Revision: 33897
2012-10-23 12:21:34 +00:00
0d2cf5f9e3
kernel: move the bcma fallback sprom fix to generic
...
bcm63xx needs the bcma fallback sprom fix, too.
SVN-Revision: 33896
2012-10-23 10:57:49 +00:00
0cc4bed41c
add support for Comtrend AR5381u.
...
Router: Comtrend AR5381u.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 33895
2012-10-23 10:57:47 +00:00
d73871fb18
add support for Comtrend AR5387un.
...
Router: Comtrend AR5387un.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 33894
2012-10-23 10:57:44 +00:00
e93725a743
add support for HomeStation ADB P.DG A4001N.
...
Router: HomeStation ADB P.DG A4001N.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 33893
2012-10-23 10:57:39 +00:00
95e642632a
x86: correct image magic for grub2 images
...
Sysupgrade broke on x86 when grub2 superceded grub. This patch
corrects tha magic_word to be expected in grub2 combined images.
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 33890
2012-10-22 16:06:29 +00:00
61686a1514
add back support for BCM6345 Ethernet DMA engine
...
SVN-Revision: 33889
2012-10-22 12:57:22 +00:00
eeed82c04e
fix clocks bits for BCM6345
...
SVN-Revision: 33888
2012-10-22 12:57:14 +00:00
ca25e61c6c
refresh 3.3 patches
...
SVN-Revision: 33887
2012-10-21 21:30:30 +00:00
e6171dfb2c
Add F@ST2604 board support.
...
Add Sagem F@ST2604 board support.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 33886
2012-10-21 14:35:06 +00:00
f1f388d527
ar71xx: rw2458n - fix flash parts
...
See #12338 . Redwave rw2458 has uboot, not redboot.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33867
2012-10-19 18:32:49 +00:00
b530d9d2b3
ramips: disable 5GHz on the built in wireless mac of the TEW-69{1,2}GR
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33864
2012-10-19 17:42:22 +00:00
6ca2970e4b
ramips: add profile and build image for the TEW-691GR board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33852
2012-10-18 07:23:13 +00:00
21180e29f7
ramips: add user-space support for TEW-691GR
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33851
2012-10-18 07:23:12 +00:00
25d53c4c28
ramips: rt3883: add initial support for the TRENDnet TEW-691GR board
...
No wireless support.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33850
2012-10-18 07:23:11 +00:00
462a53c367
ramips: add profile and build image for the TEW-692GR board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33849
2012-10-18 07:23:10 +00:00
d3c368c324
ramips: add user-space support for the TEW-692GR board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33847
2012-10-18 07:23:07 +00:00
7f8b7207c9
ramips: rt3883: add initial support for TRENDnet TEW-692GR board
...
No wireless support.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33846
2012-10-18 07:23:06 +00:00
bf9ae9432b
ramips: add profile and build image for the DIR-645 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33845
2012-10-18 07:23:04 +00:00
06edafd079
ramips: add user space support for the DIR-645
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33844
2012-10-18 07:23:03 +00:00
d1a253a2fd
ramips: rt3883: add inital support for the DIR-645 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33843
2012-10-18 07:23:02 +00:00
e962c16a88
ramips: use get_magic_long in sysupgrade image check
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33842
2012-10-18 07:23:00 +00:00
0045449b1b
generic: add driver for the the RTL8367R{B,-VB} switches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33839
2012-10-18 07:22:56 +00:00
96fa602499
ixp4xx: add sysupgrade support
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
target/linux/ixp4xx/base-files/lib/ixp4xx.sh | 25 ++
target/linux/ixp4xx/base-files/lib/upgrade/platform.sh | 156 +++++++++++++++++
target/linux/ixp4xx/image/Makefile | 11 +
3 files changed, 192 insertions(+)
SVN-Revision: 33828
2012-10-17 22:03:46 +00:00
879b7a7a9b
cns3xxx: update FIQ header file and disable RWFO
...
Update header file appropriately and disable read for ownership
Note that the FIQ support implements a workaround that provides a performance
boost over the traditional upstream workaround which ensures cache lines
are exclusive on driver CPU using 'read for ownership'.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
target/linux/cns3xxx/config-3.3 | 2 +-
target/linux/cns3xxx/patches-3.3/460-cns3xxx_fiq_support.patch | 9 ++++-----
2 files changed, 5 insertions(+), 6 deletions(-)
SVN-Revision: 33827
2012-10-17 22:03:37 +00:00
6993e19532
drop GPIODEV platform code
...
SVN-Revision: 33825
2012-10-17 21:53:37 +00:00
7a72f01a72
ar71xx: merge machine support patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33820
2012-10-17 18:27:50 +00:00
2e1bc1e15b
ar71xx: also use the ath79_set_ar934x_eth_cfg helper for DB120
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33819
2012-10-17 18:27:48 +00:00
31387947c8
ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33818
2012-10-17 18:27:47 +00:00
5ffc08e3dc
ar71xx: add a helper function for setting up ETH_CFG register on AR934x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33817
2012-10-17 18:27:45 +00:00
35a91a4fe8
ar71xx: OM2P-HS sysupgrade support
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33803
2012-10-17 08:26:05 +00:00
c5a32cfc92
ar71xx: add support for the OpenMesh OM2P-HS board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33800
2012-10-17 08:26:01 +00:00
254d851d8a
nuport-mac: various fixes
...
- properly check for the link up condition in the phylib adjust callback
- do not assign skb->dev, eth_type_trans() already does it
- handle skb allocation failures in the refill path
SVN-Revision: 33780
2012-10-15 21:03:57 +00:00
60ecd5fe04
merge the RDC R-321x target as a subtarget of x86
...
SVN-Revision: 33779
2012-10-15 18:54:34 +00:00
f1283d8583
ar71xx: fix sysupgrade for jjPlus JWAP003
...
[juhosg: change commit message]
Signed-off-by: Artur Wronowski <arteqw@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33769
2012-10-14 16:24:26 +00:00
1944f7b916
ar71xx: ew-dorin: added ethernet switch configuration
...
Signed-off-by: embedded wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33768
2012-10-14 16:24:25 +00:00
62ab2b0da6
ar71xx: unbreak building images for OpenMesh OM2P/OM2P-LC
...
Commit r33248 introduced a regression by passing the board name plus
'board=' in the third argument. The board name string has to be put
into the image as identifier of the image type.
[juhosg: fix OpenMesh template instead of use of string substitution]
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33767
2012-10-14 16:24:22 +00:00
e4bebad4f7
add Actiontec PK5000 LEDs
...
Also share them between the GT701 and the PK5000.
Patch from Daniel Gimpelevich.
SVN-Revision: 33756
2012-10-13 17:47:45 +00:00
d78371f5c0
vlynq: rework probing and clocking setup
...
Handle the different vlynq device versions, and make the vlynq code more
in line with the original vlynq implementation.
Patch from Daniel Gimpelevich.
SVN-Revision: 33755
2012-10-13 17:47:36 +00:00
0f04f7479c
remove the squashfs alignement define
...
Patch from Daniel Gimpelevich.
SVN-Revision: 33754
2012-10-13 17:47:30 +00:00
ec4e61e558
handle LOADER_MAGIC2 in ar7part
...
This is required for Actiontec PK5000 devices. Path from Daniel Gimpelevich.
SVN-Revision: 33753
2012-10-13 17:47:25 +00:00
e5a65db1b5
increase the flash resource size to its maximum value
...
CFI detection will reduce the resource size to its real value.
Patch from Daniel Gimpelevich.
SVN-Revision: 33752
2012-10-13 17:47:20 +00:00
7205421c5b
reinstate the fixed PHY fallback for devices with undetectable switches
...
At least devices without a switch present on the MDIO bus still get a valid
link and work as expected (such as the Linksys WAG54Gv2).
SVN-Revision: 33751
2012-10-13 17:47:14 +00:00
3794a6a9dd
enable mvswitch driver
...
And fix the default network configuration to create the required VLANs.
Patch from Daniel Gimpelevich.
SVN-Revision: 33750
2012-10-13 17:47:09 +00:00
99598d2473
use the second available LED to encore mode boot states
...
Patch from Daniel Gimpelevich.
SVN-Revision: 33749
2012-10-13 17:47:04 +00:00
31c324f451
use wpad-mini instead of hostapd
...
SVN-Revision: 33744
2012-10-13 17:46:32 +00:00
c24df51736
add support for new Option modules (GTM66xxWFS/GTM67xxWFS)
...
Add new device ID's for the hso driver as well as usb storage
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33743
2012-10-13 06:58:42 +00:00
4cfd3dc8ed
x86/kvm_guest: enable PCIE support
...
SVN-Revision: 33741
2012-10-12 16:51:31 +00:00
e7b2a4170c
copy initramfs kernel to bin directory
...
SVN-Revision: 33726
2012-10-11 15:45:24 +00:00
ba6751058b
gpiodev/gpioctl RIP
...
SVN-Revision: 33725
2012-10-11 11:58:09 +00:00
88a740ff80
fix (really this time) laguna UART config
...
Properly terminate the correct platform resource for laguna UARTs
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33721
2012-10-11 09:51:35 +00:00
9b22ca8042
The Gateworks System Controller (GSC) is an i2c device that provides system level monitoring and control of Gateworks boards. It is used on several product families spanning several different target architectures (ixp4xx, cns3xxx, davinci).
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33720
2012-10-11 07:59:06 +00:00
31c2f1a4d2
fix non terminated uart resources for laguna
...
Resolves crashes when probing multiple serial devices
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33719
2012-10-11 07:47:27 +00:00
bc3b111cfd
generate vmlinux.srec and vmlinux.bin from srec2bin
...
Useful for loading the kernel into RAM using ADAM2/PSPBoot.
SVN-Revision: 33718
2012-10-11 06:45:07 +00:00
d0ec348ded
kernel: fq_codel: dont reinit flow state
...
Keep fq_codel flow state around after queue empty.
SVN-Revision: 33687
2012-10-10 11:54:31 +00:00
f933719138
kernel: dont delay acks after ECN CE
...
Bugfix from linux head - don't delay acks from ECN congestion
experienced in some situations.
SVN-Revision: 33686
2012-10-10 11:54:27 +00:00
85871f283a
cns3xxx: Fix GPIO configuration for Gateworks Laguna boards
...
The Laguna boards do not use all the same pins for SDHCI as the Cavium
reference board.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33684
2012-10-10 11:39:02 +00:00
6bb7409e5a
cns3xxx: Fix laguna arm11mpcore watchdog
...
The ARM11MPCore Timer/Watchdog registers start at offset 0x600 which is where
all mpcore-wdt boards point the driver base too. I believe this is wrong
because 0x600 is aliased to the timer/watchdog of the 'current CPU' where
0x700 is CPU0's timer/watchdog, and 0x800 is CPU1's timer/watchdog. Thus
if your timer/watchdog application is switching between CPU's it can end up
writing to the wrong CPU's registers which results in random board resets
from watchdog timeouts etc.
This patch forces the timer/watchdog driver to use CPU0's registers always.
Its my opinion that other mpcore-wdt boards should be doing the same thing.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33683
2012-10-10 11:38:58 +00:00
f570c806ef
mtd: allow partial block unlock
...
This allows sysupgrade for devices such as the Gateworks Avila/Cambria
product families based on the ixp4xx using the redboot bootloader with
combined FIS directory and RedBoot config partitions on larger FLASH
devices with larger eraseblocks.
This second iteration of this patch addresses previous issues:
- whitespace breakage fixed
- unlock in all scenarios
- simplification and fix logic bug
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33681
2012-10-10 11:38:44 +00:00
cae6f4ddb4
ixp4xx: enable OPTIMIZE_FOR_SIZE
...
Enabling OPTIMIZE_FOR_SIZE cuts the kernel binary down by 50K which is
critical for some small-footprint boards.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33679
2012-10-10 11:38:28 +00:00
f14b8d43f2
ixp4xx: add missing reboot handlers ( fixes #11577 )
...
SVN-Revision: 33672
2012-10-09 15:38:55 +00:00
856fba88d9
x86: remove the reboot=bios command line parameter ( #12193 )
...
SVN-Revision: 33671
2012-10-09 15:20:11 +00:00
fbe0af3237
bcm63xx: remove bcm_tag usage in kernel
...
Fixes #12292 .
SVN-Revision: 33670
2012-10-09 08:08:49 +00:00
6a000ba37a
bcm63xx: fix 963281TAN image names
...
it's a 6328, not a 6348.
SVN-Revision: 33665
2012-10-08 13:08:40 +00:00
997ace7e5e
firmware-utils: move bcm_tag.h here
...
Since there is only one user of bcm_tag.h left, we can safely move it
into the firmware-utils directory, replacing the symlink.
SVN-Revision: 33655
2012-10-08 09:59:50 +00:00
f16ea6be3f
bcm63xx: fix entering failsafe through button
...
gpio_keys_polled needs to be loaded in preinit for buttons to work for
entering failsafe.
SVN-Revision: 33653
2012-10-08 09:59:44 +00:00
e5bb1a1bc7
cns3xxx: add sysupgrade support
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
target/linux/cns3xxx/base-files/lib/cns3xxx.sh | 22 ++
target/linux/cns3xxx/base-files/lib/upgrade/platform.sh | 122 ++++++++++++++++
target/linux/cns3xxx/image/Makefile | 19 +-
3 files changed, 159 insertions(+), 4 deletions(-)
SVN-Revision: 33650
2012-10-07 23:24:02 +00:00
68449e2e01
cns3xxx: add GW2383 board support
...
Add GPIO/LED support for Gateworks GW2383
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
target/linux/cns3xxx/patches-3.3/300-laguna_support.patch | 18 +++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
SVN-Revision: 33649
2012-10-07 23:23:58 +00:00
6b778f57aa
cns3xxx: fix gpio access and add gpio IRQ support
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
target/linux/cns3xxx/patches-3.3/470-gpio_irq.patch | 536 ++++++++++++++++++++
1 file changed, 536 insertions(+)
SVN-Revision: 33648
2012-10-07 23:23:52 +00:00
bca070dfbe
ixp4xx: update Gateworks Avila board support
...
Several new features for newer boards:
- add additional UARTs present on some boards
- add additional LEDs present on some boards
- add HSS audio device codec present on some boards
- add support for GSC present on some boards
- add per model setup support for newer boards
- set FLASH window per-model for boards with larger FLASH
Some fixes:
- add IRQ mapping for additional PCI devices (USB Host)
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33647
2012-10-07 23:23:47 +00:00
22b86fec7c
ixp4xx: patch cleanup
...
roll all avila patches into a single patch (no code changes)
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33646
2012-10-07 23:23:43 +00:00
d660734a1b
ixp4xx: Add HSS audio driver for Avila product family
...
Add ixp4xx HSS audio driver for Avila
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33645
2012-10-07 23:23:39 +00:00
ce692ed043
ixp4xx: update Gateworks Cambria board support
...
Several new features for newer boards:
- add irq mapping for additional devices
- add platform data for i2c bus to SFP modules
- add additional UARTs present on some boards
- increased R/W delay for expansion bus UARTs
- add additional LEDs present on some boards
- add GPIO exports and configuration
- add ENET switch config present on some boards
- add support for GSC present on some boards
- added per model setup support for newer boards
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33644
2012-10-07 23:23:34 +00:00
21d182b9e5
ixp4xx: patch cleanup
...
roll all cambria patches into a single patch (no code changes)
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33643
2012-10-07 23:23:29 +00:00
d3567cc886
ixp4xx: split out new UART I/O to its own patch
...
This is being done for general cleanup
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33642
2012-10-07 23:23:25 +00:00
1abbe676d1
x86: rename the iso file to openwrt-x86-generic.iso
...
SVN-Revision: 33641
2012-10-07 23:05:39 +00:00
0dd7644ec7
x86: remove grub-legacy
...
SVN-Revision: 33640
2012-10-07 23:01:56 +00:00
a1bcd25082
x86: add grub2 iso support
...
SVN-Revision: 33639
2012-10-07 23:01:52 +00:00
53cc34e517
x86/generic: enable cdrom + iso9660 support
...
SVN-Revision: 33638
2012-10-07 23:01:47 +00:00
befb648642
ar71xx: build image for the TL-WR841N/ND v8
...
SVN-Revision: 33623
2012-10-04 20:16:06 +00:00
02a85dfd85
ar71xx: user-space support for TL-WR841N/ND v8
...
SVN-Revision: 33622
2012-10-04 20:16:05 +00:00
196c6c5b45
ar71xx: add support for the TL-WR841N/ND v8 board
...
SVN-Revision: 33621
2012-10-04 20:16:03 +00:00
07234dc8bd
bcma: do not initialize deactivated PCIe cores
...
Before it was tried to initialize the deactivated PCIe core in client
mode, but this causes the SoC to hang. Just do not initialize it at all
and ignore the core it is not working and nothing is connected to it
when the specific bit is set in the boardflags.
SVN-Revision: 33620
2012-10-04 15:45:54 +00:00
2819890839
use memcmp in mem size detection as suggested by blogic
...
SVN-Revision: 33619
2012-10-04 15:42:12 +00:00
5e0df9582b
fix typo in 05_set_ether_mac_rdc preinit script ( #11166 )
...
SVN-Revision: 33618
2012-10-04 12:36:50 +00:00
d832cd11f8
ramips: add image for ALL0256N-8M
...
The new version of the ALL0256N now got 8MB SPI NOR flash instead of 4MB.
In order to expose the whole amount of flash, add another image which contains
the corresponding GENERIC_8M mtdparts.
[juhosg: change suffix from '8m' to '8M']
Patch by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33614
2012-10-04 06:34:09 +00:00
47c5c4df1c
add Default and Gumstix PXA profiles
...
Gumstix builds a fake flash image for usage in qemu
SVN-Revision: 33609
2012-10-03 16:15:05 +00:00
48daf407a6
advertise jffs2 feature
...
SVN-Revision: 33607
2012-10-03 16:12:57 +00:00
bb7ac8ae7d
remove broken flag
...
SVN-Revision: 33606
2012-10-03 16:12:39 +00:00
8f44ba1ae2
fix build with latest gpiolib changes
...
SVN-Revision: 33605
2012-10-03 16:12:03 +00:00
d504b6251c
more convertions to {read,write}_relaxed I/O accessors
...
SVN-Revision: 33604
2012-10-03 16:10:47 +00:00
a2e1dce829
cns3xxx: add missing kernel config symbol
...
SVN-Revision: 33603
2012-09-30 15:31:34 +00:00
9f083117d1
refresh patches
...
SVN-Revision: 33602
2012-09-30 11:45:53 +00:00
642fe7f10a
bcma: use fallback sprom if sprom on card was not valid
...
Sometimes the PCIe card indicates that it has a sprom somewhere and we
are able to read the memory region, but it is empty and not valid. In
these cases we should try to use the fallback sprom as a last chance.
SVN-Revision: 33601
2012-09-30 11:45:31 +00:00
42952fd94f
bcma: initialize sprom earlier
...
The chip common and the PCIe code are accessing the sprom struct which
is not filled when these cores are initialized. Fix this by adding an
early initialize and fill the sprom struct before accessing it in other
code.
SVN-Revision: 33600
2012-09-30 11:44:44 +00:00
2d40590a23
run make kernel_oldconfig
...
SVN-Revision: 33599
2012-09-30 11:44:04 +00:00
e5eefed084
ignore the last page on bcma based SoCs
...
SVN-Revision: 33598
2012-09-30 11:43:40 +00:00
c9feffc332
Fix reading sprom from nvram without a prefix
...
The bcma based SoCs with a ieee80211 core on the SoC and an other
connected via PCIe or USB store the sprom for the SoC with a sb/1/
prefix. The SoC with just one wifi core do not use prefixes. The
BCM4706 do not use a prefix for the SoC part at all, because the prefix
is the path to the ieee80211 core and there is non on the BCM4706.
SVN-Revision: 33597
2012-09-30 11:43:13 +00:00
4d5c75a54e
improve the check for the memory size
...
This will hopefully fix bug #9360 and #9097 in trunk.
SVN-Revision: 33596
2012-09-30 11:42:16 +00:00
f3cab53f27
dont explicitly select wireless-tools. rely on the drivers that need them to have the right dependency
...
SVN-Revision: 33593
2012-09-28 21:54:31 +00:00
0afc7b9b6d
add support for adm6996 phy
...
SVN-Revision: 33592
2012-09-28 21:38:02 +00:00
9dc218f88f
tapi was not registeredproperly for most arcadyan boards
...
SVN-Revision: 33591
2012-09-28 20:57:06 +00:00
c53936bb4b
Add FIQ support for cns3xxx
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33581
2012-09-28 17:35:35 +00:00
2f2115c436
Update board support for Gateworks Laguna Product family
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33580
2012-09-28 17:34:18 +00:00
70729bb4a5
USB iso mode fixes
...
Resolves an issue where isochronouse USB would cause the driver to hang as
well as scheduling issues.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33579
2012-09-28 17:31:22 +00:00
170cd7a19a
ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac
...
SVN-Revision: 33575
2012-09-27 20:05:42 +00:00
a0df3fa315
generic: enable CONFIG_USB_EHCI_TT_NEWSCHED
...
This feature was experimental in old kernels but
that flag has been removed in 2.6.36. Additionally,
the option is enabled by default since then.
See: http://www.spinics.net/lists/linux-usb/msg31993.html
SVN-Revision: 33574
2012-09-27 20:05:39 +00:00
e3bcbeb427
ramips: add memory detection code for RT5350
...
SVN-Revision: 33571
2012-09-27 10:18:15 +00:00
80d2da9f0f
ramips: allow to use custom code for memory size detection
...
SVN-Revision: 33570
2012-09-27 10:18:14 +00:00
4ea68a13e3
include sys/resource.h in arch/um/os-Linux/start_up.c ( #12155 )
...
Required for recent (e)glibc systems
SVN-Revision: 33569
2012-09-27 09:21:01 +00:00
68f8db6731
fix ncores for single-core systems.
...
For cns3xxx SCU_CONFIGURATION always shows multipe cores but SCU_CPU_STATUS
shows which ones are active.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33566
2012-09-27 08:07:17 +00:00
9ace6ace8f
add i2c retries
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33565
2012-09-27 08:06:13 +00:00
7dd6b04c28
fix pcie abort handling
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33564
2012-09-27 08:05:19 +00:00
caf900f0e4
remove kmod-spi-bitbang
...
This is no longer a dependency of kmod-spi-bcm63xx
SVN-Revision: 33562
2012-09-26 20:11:37 +00:00
579e9cded8
generic: add upstream commit id to codel patches and refresh those
...
SVN-Revision: 33560
2012-09-26 14:17:17 +00:00
eb97933e2a
backport the upstream entropy changes ( #11951 )
...
SVN-Revision: 33559
2012-09-26 12:54:01 +00:00
4a67ccb163
get rid of the IRQF_SAMPLE_RANDOM flag
...
SVN-Revision: 33558
2012-09-26 12:53:58 +00:00
c27c0d1ff0
add wmbus-repeater to the dLAN USB Extender profile
...
SVN-Revision: 33556
2012-09-25 20:56:50 +00:00
c7cf4def64
enable multicast and advanced ip routers configs
...
SVN-Revision: 33555
2012-09-25 20:53:34 +00:00
d95f612340
add kmod-usb-serial-ftdi to the dLAN USB Extender profile
...
SVN-Revision: 33554
2012-09-25 20:50:20 +00:00
d8c04821c3
make uci-defaults switch detection work on rt5350
...
SVN-Revision: 33549
2012-09-25 14:47:18 +00:00
34d57ebd8b
add ethernet support for rt5350
...
SVN-Revision: 33548
2012-09-25 14:47:08 +00:00
af0cd76937
make ramips ethernet use a register mapping table
...
SVN-Revision: 33547
2012-09-25 14:46:58 +00:00
0818180715
activate failsafe on all ports of the switch and not just port 0.
...
Sometimes the port 0 was the WAN port or there could be some device
where the port 0 is not wired to an actual Ethernet port. Now telnet in
failsafe will listen on all ports of the switch so user do not have to
search for the correct port any more. This change will make the switch
leak traffic between the WAN and the LAN port, but you should not use
failsafe while connected to a untrusted network.
SVN-Revision: 33544
2012-09-25 14:04:59 +00:00
ffc0ea6c5d
ar71xx: create 'fat' images for the DIR-825/TEW-673GRU boards
...
With these images, it is possible to use the 'unused'
partition of the flash. The 'fat' images can be installed
with the sysupgrade command. When a 'fat' image is
installed from a regular one, the platform specific
sysupgrade script copies the calibration data to the
end of the flash. Likewise, when a regular image is
installed from the 'fat' version the sysupgrade script
copies the calibration data back to the original location.
SVN-Revision: 33540
2012-09-25 12:57:41 +00:00
e7b1949d87
ar71xx: automatically find WLAN calibration data on TEW-673GRU
...
SVN-Revision: 33539
2012-09-25 12:57:40 +00:00
8ed8e51e74
ar71xx: automatically find WLAN calibration data on DIR-825-B1
...
SVN-Revision: 33538
2012-09-25 12:57:38 +00:00
e2504a977a
ar71xx: add missing backslash to uci-defaults/leds ( closes #12240 )
...
SVN-Revision: 33537
2012-09-25 12:49:43 +00:00
394a560a9a
unbreak port mapping detection
...
SVN-Revision: 33536
2012-09-25 09:51:48 +00:00
e70ad61e44
ar71xx: use different machtype and setup for the TL-MR3040
...
Should fix #12211 . Compile tested only.
SVN-Revision: 33535
2012-09-24 18:45:56 +00:00
493b7c7f3c
x86: avoid using grub prepare when using grub2
...
SVN-Revision: 33525
2012-09-23 09:59:56 +00:00
999252dccc
x86-generic: enable a few more common kernel options/drivers
...
SVN-Revision: 33516
2012-09-22 23:29:20 +00:00
b968dcd52e
kernel: increase log buffer size
...
SVN-Revision: 33515
2012-09-22 23:10:42 +00:00
0260262f0b
x86: enable usb storage support for the generic subtarget to support booting from usb devices
...
SVN-Revision: 33514
2012-09-22 21:15:59 +00:00
52e8ee0666
x86: add support for building grub2 images
...
SVN-Revision: 33513
2012-09-22 20:10:42 +00:00
ce4244c8af
x86: split generic image building into a separate script
...
SVN-Revision: 33511
2012-09-22 20:10:35 +00:00
6c02dd2b04
x86: rename gen_image_x86.sh to gen_image_grub.sh
...
SVN-Revision: 33510
2012-09-22 20:10:31 +00:00
d6ca46cd25
cns3xxx: fix ethernet driver tx completion and queue stop/start
...
SVN-Revision: 33504
2012-09-22 00:34:53 +00:00
fb71465a4e
cns3xxx: implement ethernet fraglist tx support for improved bridging performance with jumbo frames
...
SVN-Revision: 33503
2012-09-22 00:34:49 +00:00
ed3597d927
move gpio stuff into the right file
...
SVN-Revision: 33502
2012-09-21 05:40:04 +00:00
a74cf6f9a8
refresh patches
...
SVN-Revision: 33501
2012-09-21 05:38:16 +00:00
15159604d9
cns3xxx: add a small optimization for rx offload
...
SVN-Revision: 33500
2012-09-21 00:13:12 +00:00
a1c016fe16
cns3xxx: fix ethernet port lookup for multi-descriptor jumbo frames
...
SVN-Revision: 33499
2012-09-21 00:13:08 +00:00
029aaf4514
cns3xxx: fix ethernet packet alignment issues (hw has an alignment requirement of 64), fix skb fragment chaining
...
SVN-Revision: 33498
2012-09-20 20:27:18 +00:00
c4a419b445
kernel: enable perf events when enabling profiling, fixes oprofile on arm
...
SVN-Revision: 33497
2012-09-20 20:27:14 +00:00
fd7b2b5141
deactivate mips wait instruction for MIPS 74K on Broadcom SoCs
...
When not removing support for the wait instruction, when ruining on the
BCM4706 SoC the system stops after msleep() without an exception. I
haven't seen this problem on the other Broadcom SoCs with a 74K CPU,
but in the Broadcom SDK it is deactivated for all CPUs of this type.
SVN-Revision: 33496
2012-09-20 14:51:57 +00:00
1067ccf9f7
cns3xxx: remove the broken flag
...
SVN-Revision: 33493
2012-09-19 23:50:25 +00:00
2db9e9f624
cns3xxx: fix kernel config
...
SVN-Revision: 33492
2012-09-19 23:50:22 +00:00
34d30654ae
cns3xxx: fix ethernet jumbo-frame support, use single-page rx buffers and skb fragment lists
...
SVN-Revision: 33491
2012-09-19 23:50:18 +00:00
eff9405752
cns3xxx: fix ethernet tx checksum offload
...
SVN-Revision: 33490
2012-09-19 23:50:15 +00:00
dd1fb8289f
cns3xxx: merge ethernet driver changes from gateworks
...
SVN-Revision: 33489
2012-09-19 23:50:12 +00:00
190b4344a3
cns3xxx: build images for the old boot loader and the new one (default to the new one)
...
SVN-Revision: 33488
2012-09-19 23:50:09 +00:00
59b1d018b1
cns3xxx: fix the ethernet driver makefile
...
SVN-Revision: 33487
2012-09-19 23:50:06 +00:00
Luka Perkov
John Crispin
Jonas Gorski
Imre Kaloz
Gabor Juhos
Felix Fietkau
Daniel Dickinson
Florian Fainelli
Hauke Mehrtens
Jo-Philipp Wich