Commit Graph

221 Commits (cb0eccf529fa7c7410997e88f5add533419ba76d)

Author SHA1 Message Date
Gabor Juhos 33220828dc ar71xx: build firmware image for the TP-Link TL-WDR4310 v1.0
The hardware for TP-Link TL-WDR4300 v1.1 and TL-WDR4310 v1.0 is
identical, but requires different firmware headers:

TL-WDR4300:
00000040  43 00 00 01 00 00 00 01  00 00 00 00 76 fb 83 40  |C...........v..@|

TL-WDR4310:
00000040  43 10 00 01 00 00 00 01  00 00 00 00 38 2b 50 6c  |C...........8+Pl|

[juhosg: change commit message, use a different model name]

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>

SVN-Revision: 32683
2012-07-12 13:38:40 +00:00
Gabor Juhos eabf96dc22 ar71xx: set firmware version for the TL-WR2543N
This ensures that the resulting firmware can
be flashed from the latest (v3.13.17) offical
firmware.

SVN-Revision: 32617
2012-07-05 16:25:31 +00:00
Gabor Juhos 1ea2a3cfd8 ar71xx: add profile and build image for the Atheros AP136 reference board
SVN-Revision: 32609
2012-07-05 08:26:51 +00:00
Felix Fietkau bfef2d17eb ar71xx: update the EW Dorin MTD layout, increase kernel partition size (requested by EW)
SVN-Revision: 32599
2012-07-04 10:55:56 +00:00
Gabor Juhos 86013d40d5 ar71xx: remove the built-in MTD map of the ALL0258N
Pass the mtd_layout via the kernel command line instead.
Also increase the kernel partition size to 1024k, so current kernel can fit in.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32585
2012-07-03 15:24:01 +00:00
Gabor Juhos 7c87391c55 ar71xx: create profile and build image for the TL-WDR4300 board
SVN-Revision: 32461
2012-06-19 11:51:20 +00:00
Felix Fietkau 26cf21df02 ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de)
SVN-Revision: 32447
2012-06-19 00:22:04 +00:00
Felix Fietkau 624505df56 ar71xx: fix LZMA loader build regression from r32090 (thx, juhosg)
SVN-Revision: 32095
2012-06-06 19:37:49 +00:00
Felix Fietkau 02ab0d3ef9 ar71xx: only build all loader images if the image builder is enabled - saves some time on make target/install
SVN-Revision: 32090
2012-06-06 17:24:01 +00:00
Gabor Juhos 8865f0923e ar71xx: fix TL-WR1041 image size
SVN-Revision: 31923
2012-05-27 17:21:47 +00:00
Gabor Juhos 758f670376 ar71xx: add support for TP-Link TL-MR3040
Support for TP-Link TL-MR3040. Power LED not working - always on red, after
start should be green.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 31845
2012-05-23 21:05:24 +00:00
Gabor Juhos 9486904079 ar71xx: add profile and build image for the TL-WR1041N v2 board
Patch-by: Vince Huang <axishero@foxmail.com>

SVN-Revision: 31610
2012-05-05 17:02:41 +00:00
Gabor Juhos f14fd53e3c ar71xx: image: build initramfs images for the WHR boards
SVN-Revision: 31209
2012-04-06 06:45:08 +00:00
Gabor Juhos 6455178a6a ar71xx: image: build initramfs images for more boards
SVN-Revision: 31116
2012-03-27 19:38:13 +00:00
Gabor Juhos e2bd975a2a ar71xx: image: add MkuImage{Gzip,Lzma}/initramfs helpers
SVN-Revision: 31115
2012-03-27 19:38:11 +00:00
Gabor Juhos c7966a12b5 ar71xx: image: pass mtdlayout variables by value
SVN-Revision: 31114
2012-03-27 19:38:10 +00:00
Gabor Juhos 692e47f49f ar71xx: image: use MkuImageGzip in Image/Build/AthGzip/initramfs
SVN-Revision: 31113
2012-03-27 19:38:08 +00:00
Gabor Juhos 6cd5fb7001 ar71xx: remove the built-in MTD map of the AP96 board
Pass the mtd_layout via the kernel command line instead.

SVN-Revision: 31112
2012-03-27 19:38:07 +00:00
Gabor Juhos 61ee283899 ar71xx: remove the built-in MTD map of the PB92 board
Pass the mtd_layout via the kernel command line instead

SVN-Revision: 31111
2012-03-27 19:38:05 +00:00
Gabor Juhos 1094dc1996 ar71xx: remove the built-in MTD map of the Zcomax devices
Pass the mtd_layout via the kernel command line instead.

SVN-Revision: 31110
2012-03-27 19:38:04 +00:00
Gabor Juhos 24554ef187 ar71xx: reclaim the 'user_property' partition on WHR-* boards
SVN-Revision: 31109
2012-03-27 19:38:02 +00:00
Gabor Juhos f601339e79 ar71xx: add profile and generate image for the JA76PF2 board
SVN-Revision: 30958
2012-03-16 18:00:40 +00:00
Gabor Juhos 088dd4e879 ar71xx: stop image building if a loader is missing
SVN-Revision: 30877
2012-03-11 14:03:28 +00:00
Gabor Juhos 6b37484883 ar71xx: use v6.0.0 in UBTN-XM firmwares (closes #11038)
SVN-Revision: 30712
2012-02-24 20:41:38 +00:00
Gabor Juhos 3d20de331d ar71xx: fix image signature for UBNT-XM boards
SVN-Revision: 30626
2012-02-18 14:45:52 +00:00
Daniel Dickinson b797f72319 d-link: Add DIR-601 Profile Definition; It needs different factory images than DIR-600
SVN-Revision: 30570
2012-02-16 07:38:33 +00:00
Daniel Dickinson c736e2d4b0 Fix partitions for Cameo-based boards; kernel 3.2 is bigger
SVN-Revision: 30569
2012-02-16 07:29:26 +00:00
Daniel Dickinson 4685a51301 image: For Cameo-based board fix adding mtd layout to kernel commandline)
SVN-Revision: 30568
2012-02-16 07:24:45 +00:00
Gabor Juhos 9a0e17857e ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boards
SVN-Revision: 30508
2012-02-13 17:11:58 +00:00
Gabor Juhos 81f15f5026 ar71xx: add profile and build image for the TEW-673GRU board
SVN-Revision: 30377
2012-02-08 16:26:27 +00:00
Gabor Juhos faeca86e50 ar71xx: support for D-LINK DIR-615 rev. E4
This patch adds support for D-LINK DIR-615 E4 board. It's mostly based
on the existing support for DIR-600 A1, with some changes in the leds
configuration.

It's an updated version of the patch that reliably works on my hw for
about a year (it was built from trunk on Jan 2011). When I decided to
update the firmware and checked for the current support for that device,
I also found previously posted patches by Alexey Loukianov that
mentioned some stability issues. I'm not sure where could be the
difference, the patches are very similar except the wmac led pin number
- I was using 1, and those patches used 17.

[juhosg: add 3.2 support]

Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>

SVN-Revision: 29973
2012-01-31 18:37:09 +00:00
Gabor Juhos 97e4ddd012 ar71xx: add support for TP-Link TL-MR11U
Adds support for TL-MR11U, a portable router with very similar
hardware to the TL-WR703N and TL-MR3020, but with an onboard
2000mAh battery.

Tested, working:
All interfaces (Ethernet, 802.11n, USB)
WPS & Reset switches (Power appears to be a hardware slider)
Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled)
Sysupgrade

[juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch
breakage]

Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com>

SVN-Revision: 29972
2012-01-31 18:37:01 +00:00
Gabor Juhos 8766f32b8c ar71xx: compress kernel binaries in Image/Prepare stage
The lzma compressed kernel is used by one of the loaders.

SVN-Revision: 29971
2012-01-31 18:36:54 +00:00
Florian Fainelli eeb00634a7 add support for the Atheros AP113 reference board
This reference board is equipped with:
- AR7242 SoC
- AR9580 on-board Wi-Fi
- AR8316 switch

SVN-Revision: 29935
2012-01-28 13:19:49 +00:00
Gabor Juhos b9b768b8d3 ar71xx: use 64k block size for WZR-HP-AG300H
SVN-Revision: 29917
2012-01-27 10:42:41 +00:00
Gabor Juhos ac8116739a ar71xx: fix sysupgrade image building of atheros boards after r29899
SVN-Revision: 29916
2012-01-27 07:51:09 +00:00
Gabor Juhos 013fe76b36 ar71xx: create the temporary directory before building initramfs images
Thanks to Florian for reporting.

SVN-Revision: 29915
2012-01-26 21:28:34 +00:00
Gabor Juhos a5538a18d4 ar71xx: create a profile and build images for Compex WPE72
[juhosg: remove ath9k from the the profile package list, build WPE72
image with the Default profile as well]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 29914
2012-01-26 17:01:44 +00:00
Gabor Juhos 4f3d6c9ae9 ar71xx: use the lzma loader on the Planex boards
SVN-Revision: 29900
2012-01-24 20:12:10 +00:00
Gabor Juhos 5fa9768cee ar71xx: rename Sysupgrade/{KR,RK} to Sysupgrade/{KR,RK}uImage
SVN-Revision: 29899
2012-01-24 20:12:08 +00:00
Gabor Juhos 859c915077 ar71xx: pass mtdlayout to Planex boards via command line
SVN-Revision: 29894
2012-01-24 18:40:33 +00:00
Gabor Juhos 17bb003891 ar71xx: nuke fs_all variable in image/Makefile
SVN-Revision: 29880
2012-01-24 09:47:25 +00:00
Gabor Juhos 1fb88e2541 ar71xx: create interim kernel files in a separate dir
This reduces the size of the ImageBuilder tarball a lot.

SVN-Revision: 29879
2012-01-24 09:47:23 +00:00
Gabor Juhos a43e2f508f ar71xx: prebuild all loaders in Image/Prepare stage
SVN-Revision: 29878
2012-01-24 09:47:22 +00:00
Gabor Juhos 7b7427e52c ar71xx: build ALFA AP96 images with default profile as well
SVN-Revision: 29866
2012-01-22 22:33:15 +00:00
Gabor Juhos ef1c53b7b7 ar71xx: change board id of the UniFi board
SVN-Revision: 29849
2012-01-22 13:51:50 +00:00
Gabor Juhos 4edff7d3ef ar71xx: add a profile and build images for the TL-WR2543N/ND
SVN-Revision: 29682
2012-01-07 19:36:42 +00:00
Gabor Juhos 1e848b17ad ar71xx: add support for Redwave RW2458N
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 29669
2012-01-06 07:20:59 +00:00
Gabor Juhos d65c6fe720 ar71xx: create profile and build image for the ALFA AP96 board
SVN-Revision: 29663
2012-01-04 21:13:57 +00:00
Gabor Juhos 807e046193 ar71xx: specify console kernel parameter for the Compex boards
SVN-Revision: 29660
2012-01-04 17:30:59 +00:00