Commit Graph

217 Commits (cad9519ebaf88cb4f3669ca1a04f04eb5d096311)

Author SHA1 Message Date
Mathias Kresin cf7154db07 kernel: only optimized for size if small_flash
Add a new config option to allow to select the default compile
optimization level for the kernel.

Select the optimization for size by default if the small_flash feature is
set. Otherwise "Optimize for performance" is set.

Add the small_flash feature flag to all (sub)targets which had the
optimization for size in their default kernel config.

Remove CC_OPTIMIZE_FOR_* symbols from all kernel configs to apply the new
setting.

Exceptions to the above are:

  - lantiq, where the optimization for size is only required for the
    xway_legacy subtarget but was set for the whole target
  - mediatek, ramips/mt7620 & ramips/mt76x8 where boards should have
    plenty of space and an optimization for size doesn't make much sense
  - rb532, which has 128MByte flash

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-07-12 18:15:32 +02:00
John Crispin f6a067a699 kernel: mark all v3.18 and v4.4 kernels are source-only
These will be removed if not updated to v4.4

Signed-off-by: John Crispin <john@phrozen.org>
2018-05-24 08:55:52 +02:00
Mathias Kresin c4ac02ffca treewide: remove obsolete sysupgrade watchdog kill
The watchdog kill command was meant for busybox watchdog. Busybox watchdog
was replaced by the procd watchdog mid 2013 with commit df7ce9301a
("busybox: disable the watchdog utility by default"), which makes the kill
command obsolete since quite some time.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-02-16 14:44:02 +01:00
Stijn Tintel 75e63c2494 kernel: update kernel 3.18 to version 3.18.43
Refresh patches for all targets supporting 3.18 and not marked broken.
Compile-tested on all targets using 3.18 and not marked broken.

Changes to generic/610-netfilter_match_bypass_default_checks.patch based
on 84d489f64f.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2016-10-24 20:25:14 +03:00
Mathias Kresin 92eaf27c62 use immediate set in target Makefiles
No functional change, it's just to have the same style everywhere. This
way I don't need to use any regex magic to extract all subtargets for
compile tests.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-10 15:30:38 +02:00
Felix Fietkau aa53f78038 build: fix subtarget descriptions
Move Target/Description above the target.mk include

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-04 13:35:11 +02:00
Stijn Tintel fa5eab6ec5 au1000: rename patches directory to patches-3.18
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2016-08-15 15:32:37 +02:00
Felix Fietkau 9201e88f51 kernel: remove hostap driver
It has been marked as broken for well over a month now and nobody has
complained.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 12:25:24 +02:00
Jonas Gorski dbe4173b20 image: fix jffs2(_nand) image generation
Variables dependend on JFFS2_BLOCKSIZE and NANDBLOCK_SIZE are used
for template generation, so need to be present before inclusion of
image.mk in target image Makefiles.
So move all declarations to before any includes.

Fixes: r42878 ("image.mk: clean up and parallelize mkfs calls")
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46564
2015-08-05 13:55:52 +00:00
John Crispin c0c8d3a95f au1000: add a missing dependency to the pcmcia module
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45864
2015-06-01 06:03:52 +00:00
Jo-Philipp Wich 80a933af98 au1000/au1550: fix profile package list
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45819
2015-05-29 11:04:04 +00:00
Jo-Philipp Wich f449ba5c94 au1000/au1550: enable pcmcia support flag
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45818
2015-05-29 11:03:59 +00:00
Jo-Philipp Wich f19757215b au1000: fix kmod-pcmcia-au1000
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45817
2015-05-29 11:03:55 +00:00
Jo-Philipp Wich 7d44f7630f au1000: use srecimage.pl instead of objcopy, fixes imagebuilder
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45809
2015-05-28 15:54:01 +00:00
Jonas Gorski 76d079204d kernel: update 3.18 to 3.18.14
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
2015-05-21 19:32:46 +00:00
John Crispin 3c0ea6eced au1000: drop 005-fix-cpu-clk.patch
it has been upstreamed and treackled down with the latest 3.18 update

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44935
2015-03-22 07:03:02 +00:00
John Crispin 43c66cb434 au1000: drop 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44816
2015-03-16 07:40:19 +00:00
John Crispin a3af8bf216 au1000: build fails if the input layer is not selected
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44640
2015-03-10 11:03:04 +00:00
John Crispin fa097e5ae5 kernel: disbale HAMRADIO in generic config
HAMRADIO enabled in all generic configs, but no one platform directly
use related drivers/protocols. This symbol is only used for kmod-ax25
package modules. Furthermore, half of platforms explicitly disables
this symbol, what silently disables build of modules for kmod-ax25
package.

So disable HAMRADIO by-default in generic config, add it to kmod-ax25
package and remove it from platform specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44613
2015-03-06 07:56:21 +00:00
John Crispin 7886cced18 kernel: remove GENERIC_NET_UTILS from platform configs
CONFIG_GENERIC_NET_UTILS is selected by CONFIG_NET and already enabled
in generic config, so we don't need this symbol in platform specific
configurations.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44611
2015-03-06 07:55:57 +00:00
Jonas Gorski 3139140339 kernel: move CONFIG_MIPS_O32_FP64_SUPPORT to generic configs
Most MIPS targets have it disabled, so move the symbol to the generic
configs to keep target configs small.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44583
2015-03-01 11:37:15 +00:00
John Crispin 1a1d69da08 au1000: fix 3.18 and set it as default
Thanks to Bruno Randolf for testing and Manuel Lauss for providing a fix.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44487
2015-02-18 09:49:38 +00:00
John Crispin 682cf3b854 au1000: add 3.18 support
this is only compile tested

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44345
2015-02-09 12:12:39 +00:00
Felix Fietkau cfe3280494 au1000: remove leftover 3.3 kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43691
2014-12-13 11:55:49 +00:00
Felix Fietkau 511fadd857 au1000: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43690
2014-12-13 11:55:41 +00:00
John Crispin 21349229f7 au1000: revert 43626 due to syntax errors
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43641
2014-12-11 22:27:56 +00:00
John Crispin ed61e202a1 au1000: distinguish different models and set correct MAC-address
The target au1000 has at least 2 different models, the
'InternetBox' and the 'MeshCube' which look very similar
from the kernel point of view but are totally different
devices which base on the same design. Populating /tmp/sysinfo
now. The 1st one has an issue which leads to a random
mac-address after each boot which is corrected now via
reading the bootloader-env. The real fix would be
converting to DTS, this is only a workaround now.

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43626
2014-12-11 18:28:44 +00:00
Felix Fietkau 9a495f6bbb kernel: refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43564
2014-12-08 12:04:25 +00:00
John Crispin ae51d64671 au1000: set 3.14 as default
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43494
2014-12-02 15:23:37 +00:00
John Crispin 00f5d358ac au1000: add 3.14 support
this is only compile tested

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43463
2014-12-01 16:14:07 +00:00
Felix Fietkau c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
2014-10-24 19:34:02 +00:00
John Crispin ba63338d3f kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41776
2014-07-20 17:31:11 +00:00
Felix Fietkau 6c7de7abca au1000: remove linux 3.6 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41670
2014-07-16 06:55:19 +00:00
Hauke Mehrtens a36ca743d6 au1000: update to kernel 3.10.44
This was tested by Bruno Randolf on au1000 (MTX-1)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41669
2014-07-15 22:03:10 +00:00
John Crispin 0f76f8a16e target/linux/*: kmod-fs-ext{2,3} RIP
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41560
2014-07-10 19:16:15 +00:00
Hauke Mehrtens e63318d6d5 kernel: do not build kernel modules by default
No config option should be set to m in the default config, because
there is also some script needed which picks the module up into the
image and that is missing this way. Always create a kmod when building
a module.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41539
2014-07-06 22:34:24 +00:00
Hauke Mehrtens 157cf7e582 au1000: add support for kernel 3.10
This is compile tested only, please run test and report back.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41534
2014-07-06 18:20:59 +00:00
John Crispin f933a741a9 target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGC
ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct
var $# (=number of args) here. under normal conditions this had no impact,
but we should at least correct it. the error was observable like this:

root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh
root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh
root@box:~ . /lib/upgrade/platform.sh
root@box:~ . /lib/upgrade/common.sh
root@box:~ platform_check_image /tmp/myfirmware.bin
ash: bad number
root@box:~ echo $?
0

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 40915
2014-06-02 12:43:22 +00:00
John Crispin a100fd3b4a au1000: make sysupgrade compatible with all file system types
This patch adds support for all file system types as discussed earlier:

https://lists.openwrt.org/pipermail/openwrt-devel/2013-October/022109.html

This patch depends on a previous patch:

https://lists.openwrt.org/pipermail/openwrt-devel/2013-October/022111.html

Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de>

SVN-Revision: 38675
2013-11-07 12:46:16 +00:00
John Crispin 8247d9926a au1000: create sysupgrade binary for each file system type
This patch should prevent overriding of sysupgrade binaries in the bin directory
if we build images for more then one file system type.

Discussion:

https://lists.openwrt.org/pipermail/openwrt-devel/2013-October/022108.html

Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de>

SVN-Revision: 38674
2013-11-07 12:46:12 +00:00
Florian Fainelli 6a4f2922f6 targets: prepare for supporting normal and initramfs images
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37049
2013-06-27 19:58:31 +00:00
Jonas Gorski 1beaf031d1 target: don't build jffs2 nor images by default
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36863
2013-06-05 20:58:59 +00:00
Hauke Mehrtens 18c47be19a kernel: add missing CONFIG_BLK_DEV_IDE_AU1XXX config option.
SVN-Revision: 36102
2013-03-21 14:56:04 +00:00
Florian Fainelli 7987c8d0dc au1000: remove support for 3.3. kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36067
2013-03-17 14:33:47 +00:00
Florian Fainelli c56c18168e au1000: switch to 3.6 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36066
2013-03-17 14:33:41 +00:00
Florian Fainelli 5592a619d0 au1000: keep the MTX-1 watchdog pin low during boot
Do this until the watchdog driver is loaded and the user-space watchdog
daemon can start pinging the watchdog.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36065
2013-03-17 14:33:36 +00:00
Florian Fainelli 5953e79888 au1000: migrate to common led helper functions
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35660
2013-02-18 10:37:52 +00:00
Gabor Juhos c2f018fca2 remove common symbols from 3.6 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34404
2012-11-29 15:21:41 +00:00
Gabor Juhos 1f516235ea remove common symbols from 3.3 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
Florian Fainelli 9760644af4 advertise squashfs feature
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34157
2012-11-11 19:26:54 +00:00