Florian Fainelli
647541a1a0
CF driver cleanup
...
SVN-Revision: 9473
2007-11-01 17:11:16 +00:00
Florian Fainelli
e8d61c7aaa
Update S100 profile ( #2587 )
...
SVN-Revision: 9459
2007-10-29 10:09:45 +00:00
Florian Fainelli
734ace1804
Resync kernel config, put back yellow led registration ( #2607 )
...
SVN-Revision: 9458
2007-10-29 10:03:14 +00:00
Jens Muecke
b314ffdd3a
Initial OLPC target
...
SVN-Revision: 9457
2007-10-28 21:20:48 +00:00
John Crispin
39679eba93
fixed typo in generic squashfs split patch ... shame on you :)
...
SVN-Revision: 9455
2007-10-27 19:41:20 +00:00
Gabor Juhos
d29af25874
reduce wasted flash space by ~56K on Edimax devices, thanks to Bernhard Held ( closes : #2549 )
...
SVN-Revision: 9450
2007-10-26 07:51:49 +00:00
Felix Fietkau
41815ee5c8
add feature flag for display support. will be used as dependency for x.org
...
SVN-Revision: 9448
2007-10-25 21:08:46 +00:00
Florian Fainelli
3260efaa90
Fix another wrong shitfing
...
SVN-Revision: 9447
2007-10-25 16:31:23 +00:00
Florian Fainelli
fae75b2f4d
Wrong bit shifting for the cfrdy function, will always return cf-mips busy
...
SVN-Revision: 9446
2007-10-25 16:22:27 +00:00
Florian Fainelli
6b70ed8f18
Fix the r8169 kernel module ( #2554 )
...
SVN-Revision: 9436
2007-10-24 19:23:47 +00:00
Florian Fainelli
0f239c91a9
The build system actually changed the routerboard kernel ( #2584 )
...
SVN-Revision: 9430
2007-10-24 17:17:04 +00:00
Felix Fietkau
39a43187f3
silence a bogus preinit message
...
SVN-Revision: 9429
2007-10-24 17:14:09 +00:00
Florian Fainelli
66231687af
The watchdog driver is now a platform device driver and reads its gpio line while registering
...
SVN-Revision: 9425
2007-10-24 13:43:15 +00:00
Gabor Juhos
5f122462c0
minor cleanups
...
SVN-Revision: 9423
2007-10-24 08:19:16 +00:00
Matteo Croce
788a010131
ar7_gpio: remove unneeded checks and volatile
...
SVN-Revision: 9419
2007-10-23 15:45:54 +00:00
Gabor Juhos
71f9b205e4
fix flash driver, it should work on RB150 as well
...
SVN-Revision: 9418
2007-10-23 12:31:13 +00:00
Eugene Konev
ce9584fad9
ar7: fix eva image generation
...
SVN-Revision: 9417
2007-10-23 12:02:46 +00:00
Florian Fainelli
2514d7f799
The RB513 CF driver is now a module, enable it by default for the RB1xx profile. Fix the membase of the CF driver.
...
SVN-Revision: 9416
2007-10-23 10:46:19 +00:00
Florian Fainelli
486492b407
We are now at .23.1
...
SVN-Revision: 9415
2007-10-23 08:13:12 +00:00
Felix Fietkau
a2af03953b
Add ps3 target
...
This patch adds a target for the Sony PlayStation 3.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
SVN-Revision: 9413
2007-10-23 06:23:41 +00:00
Felix Fietkau
a10edd4cee
Add udev initilisation
...
We have a udev package, but no means to start udev at boot.
This change adds the necessary startup in /init, and adds the required
/sbin/udevsettle to the udev installed files
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
SVN-Revision: 9412
2007-10-23 06:23:36 +00:00
Felix Fietkau
b513ee61a5
only do hotplug2 init if hotplug2 is present
...
The current /init script unconditionally does the initialisation for
hotplug2, including mounting a new /dev. If hotplug2 isn't present, we
end up with no device nodes.
This change only does the hotplug2 init if hotplug2 is present, but
always mounts /sys.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
SVN-Revision: 9411
2007-10-23 06:23:33 +00:00
Felix Fietkau
881bac2db2
Allow targets to specify extra initramfs source files
...
The CONFIG_INITRAMFS_SOURCE Kconfig variable can be a space-separated
list of source files (or directories). This allows a platform to
add extra components to the initramfs image, by defining the
INITRAMFS_EXTRA_FILES make var.
By default, we add a simple initramfs extra file for the generic-2.6
platform, which specifies a few device nodes.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
SVN-Revision: 9410
2007-10-23 06:23:29 +00:00
Felix Fietkau
d8e032edef
don't replace powerpc arch with ppc
...
'powerpc' is a valid arch for the LINUX_KARCH variable, but the build
system unconditionally replaces LIUNUX_KARCH=powerpc with
LINUX_KARCH=ppc.
This change only does the replacement if LINUX_KARCH isn't set. This
allows us to use the powerpc architecture.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
SVN-Revision: 9405
2007-10-23 06:23:12 +00:00
Florian Fainelli
2a0ca50ce2
Add preliminary support for the Routerboard 153 CF slot ( #2550 )
...
SVN-Revision: 9403
2007-10-22 20:56:34 +00:00
Florian Fainelli
5db86fb47a
Resync kernel config, make kernel.{flash,ram}.srec available
...
SVN-Revision: 9402
2007-10-22 16:17:09 +00:00
Eugene Konev
6bf1f9a467
ar7: add eva image generation (thanks Axel Gembe)
...
SVN-Revision: 9401
2007-10-22 14:20:02 +00:00
John Crispin
0ac64f1dfc
fix b0rked atheros kernelconfig
...
SVN-Revision: 9386
2007-10-21 08:56:10 +00:00
John Crispin
9f73ab51f3
refreshed madwifi patches
...
SVN-Revision: 9380
2007-10-20 19:13:53 +00:00
Felix Fietkau
86a906bed2
reorganize subtargets, sort subtargets below top level targets
...
SVN-Revision: 9378
2007-10-20 19:10:06 +00:00
Gabor Juhos
ab8a75d73f
make morse LED trigger available as a package, and fix it to compile with 2.6.23
...
SVN-Revision: 9363
2007-10-20 14:32:13 +00:00
Gabor Juhos
d2cfb2934f
add LEDs trigger for switch port states, thanks to Bernhard Held ( closes : #2153 )
...
SVN-Revision: 9362
2007-10-20 07:45:08 +00:00
Gabor Juhos
4c093ed622
fix typos in the switch driver, thanks to Bernhard Held ( closes : #2573 )
...
SVN-Revision: 9361
2007-10-20 05:51:10 +00:00
Gabor Juhos
2228e4092c
add patch for gpio-leds to support special brightness values, thanks to Bernhard Held ( closes : #2572 )
...
SVN-Revision: 9360
2007-10-20 05:26:19 +00:00
Eugene Konev
1e5a1f2aa5
fritzbox leds detection (thanks Axel Gembe)
...
SVN-Revision: 9357
2007-10-19 03:02:49 +00:00
John Crispin
32dc9ca55a
fixed missing symbols in atheros kernel config
...
SVN-Revision: 9356
2007-10-18 21:46:52 +00:00
Felix Fietkau
3acb27cdd7
don't dispatch spurious irq0 events
...
SVN-Revision: 9347
2007-10-18 18:27:33 +00:00
Gabor Juhos
96da91f5e0
add kernel config option to disabling common PCI quirks, resync kernel config
...
SVN-Revision: 9346
2007-10-18 15:14:55 +00:00
Gabor Juhos
36a1feebdd
add ids for Edimax BR-6104Wg boards
...
SVN-Revision: 9342
2007-10-18 07:40:01 +00:00
Gabor Juhos
5044a3267a
fix initcall level in i2c-gpio-custom driver if not built as a module
...
SVN-Revision: 9341
2007-10-17 17:26:54 +00:00
Gabor Juhos
49b631d730
switch driver cleanup, 4th phase
...
SVN-Revision: 9340
2007-10-17 08:10:47 +00:00
John Crispin
dc0a4f8ff8
added rtl8169, from #2554
...
SVN-Revision: 9339
2007-10-16 21:02:36 +00:00
Gabor Juhos
c96dcab711
switch driver cleanup, 3rd phase
...
SVN-Revision: 9334
2007-10-16 13:12:51 +00:00
Eugene Konev
53f219cc2b
Fix tx error handling ( #2552 ). Make rx ring size actually configurable through ethtool
...
SVN-Revision: 9333
2007-10-16 12:53:22 +00:00
Imre Kaloz
f07da1ca93
resync avr32 with 2.6.23.atmel.1
...
SVN-Revision: 9332
2007-10-16 12:22:57 +00:00
Gabor Juhos
63c27908bf
switch driver cleanup, 2nd phase
...
SVN-Revision: 9330
2007-10-16 08:15:18 +00:00
Florian Fainelli
e9d7dc5803
Resync kernel config, do not enable the setup file
...
SVN-Revision: 9329
2007-10-15 17:26:27 +00:00
Florian Fainelli
f61a627092
Typo on PCI ids
...
SVN-Revision: 9328
2007-10-15 17:04:34 +00:00
Florian Fainelli
9dc51096e6
Add the RDC PCI ids for a fancier PCI device table.Return the system name on boot.
...
SVN-Revision: 9327
2007-10-15 16:13:25 +00:00
Gabor Juhos
9d685a8597
switch driver cleanup, 1st phase
...
SVN-Revision: 9324
2007-10-15 06:22:34 +00:00