Commit Graph

12162 Commits (c84876702bd726ec9fd58ffa3a21c95173d2ea6b)

Author SHA1 Message Date
John Crispin 62287e589d ramips: fix target rt5350 only have 28 gpios
Signed-off-by: michael <igvtee@gmail.com>

SVN-Revision: 41475
2014-07-02 16:37:26 +00:00
John Crispin 1179d4f924 lantiq: UbinizeImage instead of lantiq-specific ubinize.cfg files
New make target in lantiq to use UbinizeImage and SysupgradeNand.
Only enabled for BTHOMEHUBV2B for the moment but should be useable
for other lantiq nand boards.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41474
2014-07-02 16:37:23 +00:00
John Crispin e2915c6981 lantiq: add support for /tmp/sysinfo
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41472
2014-07-02 16:33:11 +00:00
John Crispin 80e3282739 ralink: make xhci platform depend on mt7621
this broke CONFIG_ALL builds for mt7620

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41471
2014-07-02 14:32:43 +00:00
John Crispin cad9e554b1 ar71xx: add missing config symbol
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41455
2014-07-02 08:00:44 +00:00
John Crispin 313db9d0ee lantiq: fix missing symbols
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41454
2014-07-02 07:43:32 +00:00
John Crispin 3d81a4ef82 ralink: add Wansview NCS601W IP Camera
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41453
2014-07-02 07:42:44 +00:00
John Crispin c749b310ed ralink: register wifi firmware for WRTnode
After r41444 wifi working on WRTnode. Tested.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41452
2014-07-01 18:17:55 +00:00
John Crispin 3519322e62 ar71xx: Add support for MikroTik RouterBOARD SXT Lite
This patch adds support for the MikroTik RouterBOARD SXT Lite.

The new RB911L series is also supported as a result.

v2 of this patch fixes the wmac offset to match what is on the sticker.
v3 refreshes the patch against r41148 and defines the power led as the status led in diag.sh
v4 refreshes the patch against r41353 and fixes the patch path issue to make git am work correctly
v5 selects the kernel config option in the mikrotik profile rather than in the main ar71xx config

Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41450
2014-07-01 13:38:30 +00:00
John Crispin 5f31f01853 lantiq: Enable LANTIQ_PHY and LANTIQ_XRX200 only in XRX200 subtarget
Enable LANTIQ_PHY and LANTIQ_XRX200 only in XRX200 subtarget.

These drivers are not needed for ASE, Danube and AR9.
As side effect PHY11G and PHY22F firmwares are not included in the
kernel image, which saves 64 KB.

Signed off by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41449
2014-07-01 13:18:38 +00:00
John Crispin 9c84f72f85 ramips: set default vid of each vlan, so it won't need be set explicitly.
Signed-off-by: Xiongfei Guo <xfguo@credosemi.com>

SVN-Revision: 41448
2014-07-01 13:18:27 +00:00
John Crispin 4ddc0f9ff3 ramips: add WHR-1166 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41447
2014-07-01 10:26:42 +00:00
John Crispin 3c88de0d47 ramips: sync the WHR-600D flash layout with that of the vendor FW
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41446
2014-07-01 10:26:38 +00:00
John Crispin 2e8c6e4128 ramips: add wmac to mt7620a device tree
Signed-off-by: Roman Yeryomin <roman@advem.lv>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41445
2014-07-01 10:26:33 +00:00
John Crispin 5f6e7e1f44 ramips: add wmac to mt7620n device tree
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41444
2014-07-01 10:26:30 +00:00
John Crispin bbd8f9c96a ramips: enable wmac clock for mt7620
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41443
2014-07-01 10:26:25 +00:00
Imre Kaloz b7b222279c set led triggers for the Linksys WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41436
2014-07-01 09:45:41 +00:00
Imre Kaloz 6fa01eab80 adjust default profile, and add an evalboard one
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41435
2014-07-01 09:43:38 +00:00
Imre Kaloz 9ff59c7656 drop unneeded file
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41433
2014-07-01 09:35:22 +00:00
Jonas Gorski 2289e58252 brcm63xx: fix Livebox 1 support
The Livebox 1 support is currently broken. Fixed with this patch

Fixes:
- Redboot partitioning broken: fixed
- Replaced custom ephy reset with platform code
- USB code breaks the building process: fixed
- Led colors
- Removed unneded EHCI code since bcm6348 only has OHCI

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: drop unneded parts since merge, fixup to apply to current head]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41424
2014-06-30 13:34:43 +00:00
Jonas Gorski dc230d9b0f brcm63xx: 3.10: backport multi-board support
There have been no reported regressions, so backport it to 3.10.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41422
2014-06-30 13:34:37 +00:00
Jonas Gorski 44ef9f7789 brcm63xx: Add support for Comtrend WAP-5813n
This adds support for Comtrend WAP-5813n.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: refresh patches]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41421
2014-06-30 13:34:34 +00:00
Jonas Gorski 439fe41813 brcm63xx: CPVA502+ board fixes
Some fixes for Telsey CPVA502+ bcm6348 routers:
- reset the external PHY (eth1) with proper platform code, not using a led definiton
- eth1 is an external phy, not a switch, deleted forced link speed
- fixed led color

Patch made for 3.14 kernel patches.

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: also fix 3.14, refresh patches]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41420
2014-06-30 13:34:28 +00:00
Luka Perkov 26b06940a9 mvebu: drop 3.10 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41406
2014-06-29 23:29:57 +00:00
Imre Kaloz 1cebada22b fix the WPS button's GPIO number on the mamba
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41392
2014-06-29 21:26:01 +00:00
Jonas Gorski f9aeee6a6a kernel: add missing config symbols
Spotted by several buildbots.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Patchwork: http://patchwork.openwrt.org/patch/5768/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41391
2014-06-29 18:36:39 +00:00
Imre Kaloz 6e59193e88 upgrade to Linux 3.14.9
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41388
2014-06-29 13:11:57 +00:00
Imre Kaloz 3e4932758e build firmware images for the Mamba (Linksys WRT1900AC)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41387
2014-06-29 13:10:35 +00:00
Imre Kaloz 0bc385d064 set nand and squashfs features
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41386
2014-06-29 13:09:15 +00:00
Imre Kaloz b2e9df4de3 add uboot-envtools by default
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41385
2014-06-29 13:06:48 +00:00
Imre Kaloz 974f13988c handle the dual-firmware layout on the WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41384
2014-06-29 13:03:55 +00:00
Imre Kaloz d59f68531b use the power led on the WRT1900AC for status reporting
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41383
2014-06-29 12:53:09 +00:00
Imre Kaloz 2c06f05236 fixup mac addresses on the WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41382
2014-06-29 12:51:39 +00:00
Imre Kaloz f953ed4ffb automatically generate network config
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41381
2014-06-29 12:50:12 +00:00
Imre Kaloz 38f596d8f4 update mamba dts
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41379
2014-06-29 11:44:58 +00:00
Felix Fietkau 8fe75736d8 kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41378
2014-06-29 11:35:07 +00:00
Felix Fietkau e736343df9 xburst: remove bogus led support override
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41373
2014-06-29 10:25:30 +00:00
John Crispin 639682dfdb x86/kvm_guest: fix out of sync config-3.10
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41372
2014-06-29 10:11:17 +00:00
Felix Fietkau a75354ef53 kernel: implement optinal multicast->unicast conversion for igmp snooping
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41367
2014-06-28 22:27:54 +00:00
Felix Fietkau 33ad14a920 kernel: enable bridge igmp snooping
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41366
2014-06-28 22:27:49 +00:00
Felix Fietkau 79c8b619e4 ar71xx: refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41365
2014-06-28 22:27:46 +00:00
Felix Fietkau 555e876d73 xburst: remove bogus config override
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41364
2014-06-28 19:48:03 +00:00
Florian Fainelli 54c4771077 ar7: backport an upstream fixing serial console
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 41363
2014-06-27 22:17:00 +00:00
Luka Perkov abc694b463 kernel: update 3.14 to 3.14.9
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41362
2014-06-27 21:10:02 +00:00
Imre Kaloz 4fe76889c0 update config for 3.14
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41361
2014-06-27 20:38:42 +00:00
Imre Kaloz 75083c6e68 build squashfs on ubi and SysupgradeNAND images
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41360
2014-06-27 13:00:25 +00:00
John Crispin 22c4f2475b ralink: refresh kernel patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41353
2014-06-26 13:47:50 +00:00
John Crispin fbf8b288e1 kernel: refresh generic patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41352
2014-06-26 13:47:46 +00:00
John Crispin 994e5ce2f9 kernel: update 3.10.36->3.10.44
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41351
2014-06-26 13:47:42 +00:00
John Crispin 23a9bfc655 ar71xx: r41348 is missing these files
sorry, the downside when applying patches with patch

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41350
2014-06-26 13:47:35 +00:00
John Crispin e6e6a85dc9 ar71xx: add support for EasyLink M150 and M-mini
v3 refreshes the patch on trunk@41337

This patch adds support for the EasyLink EL-M150 and M-mini

http://wiki.openwrt.org/toh/easylink/el-m150
http://wiki.openwrt.org/toh/easylink/el-m-mini

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 41348
2014-06-26 11:49:47 +00:00
John Crispin baa534a8b7 ar71xx: nbg6716: Enable procd nand sysupgrage
This enables the procd nand upgrade for ZyXEL NBG 6716. Also the ubi config
is cleaned up to match the wndr4300.

Signed-off-by: André Valentin <avalentin@marcant.net>

SVN-Revision: 41346
2014-06-26 11:43:38 +00:00
John Crispin 975728813a ralink: fix up WRTNode vs WRTNODE in the dts file
https://dev.openwrt.org/ticket/16899

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41343
2014-06-26 11:43:26 +00:00
Luka Perkov cb3d5242ca mvebu: drop preinit script
The /lib/mvebu.sh script can now handle this task.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41341
2014-06-26 10:21:32 +00:00
Luka Perkov fa0b9bccea imx6: move imx6.sh to /lib/ for consistency
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41339
2014-06-26 10:14:13 +00:00
Luka Perkov a54f4320f9 kirkwood: move kirkwood.sh to /lib/ for consistency
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41338
2014-06-26 10:13:47 +00:00
Luka Perkov 8416523dba kirkwood: base-files: use /lib/functions/kirkwood.sh
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41336
2014-06-24 18:18:53 +00:00
Luka Perkov e6aea925d3 kirkwood: base-files: add script to detect board name and populate /tmp/sysinfo
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41335
2014-06-24 18:18:51 +00:00
John Crispin 1bb3e5c40a ar71xx: fix wndr3700v4 image header
https://dev.openwrt.org/ticket/16840

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41333
2014-06-24 18:14:23 +00:00
John Crispin fcb8eb5d7d ar71xx: remove old jffs2 marker from image generation on nand targets
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41332
2014-06-24 18:14:18 +00:00
John Crispin 021e728962 ralink: Update MT7530 switch driver.
- Support set VLAN ID of each vlan.
- Support untag feature.
- Replace register address with C MACRO.
- There are 8 ports for MT7530 actually.

Signed-off-by: Xiongfei Guo <xfguo@credosemi.com>

SVN-Revision: 41331
2014-06-24 18:14:14 +00:00
John Crispin 0708bda7c6 mpc83xx: add missing kernelnames into Makefile
add missing kernelnames to Makefile because those files are needed in 'target/linux/mpc83xx/image/Makefile'. Without them a compilation for mpc83xx is not possible - the buildbot stops with the error "No such file or directory"

Signed-off-by: Claudio Thomas <ct@xmodus-systems.de>

SVN-Revision: 41330
2014-06-24 18:14:09 +00:00
John Crispin 22a35a7b11 SysupgradeNAND: include rootfs-type in image name
also add quotes to paths

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 41326
2014-06-24 18:13:51 +00:00
John Crispin bcc7374d7d atheros[ar2315-spiflash]: remove duplicated definitions
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41325
2014-06-24 18:13:47 +00:00
John Crispin 78bdfeb30b atheros[ar2315-spiflash]: update driver id
Make id more specific and consistent with others platform drivers.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41324
2014-06-24 18:13:43 +00:00
John Crispin 69e02dadf1 atheros[ar2315-spiflash]: make local variables and functions static
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41323
2014-06-24 18:13:39 +00:00
John Crispin cef87d67f9 atheros[ar2315-spiflash]: I/O fixes
Directly use ioread/iowrite functions to avoid odd dependency. And
carefully annotate I/O memory pointers.

Singed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41322
2014-06-24 18:13:35 +00:00
John Crispin cce27e3b95 atheros[ar2315-spiflash]: make spiflash header local
We do not need global access to it, so move it from arch include to the
mtd subdir.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41321
2014-06-24 18:13:31 +00:00
John Crispin 08a9fcb0ef atheros[ar2315-spiflash]: pass I/O mem regions via resources
Pass I/O memory regions (flash read and MMR) via platform device
resources array and use them inside spiflash driver.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41320
2014-06-24 18:13:27 +00:00
John Crispin 1dab970e8b atheros[ar231x-pci]: do not touch iomem_resource ranges
Moving the start of IO mem to 0x10000000 leads to allocation conflict
with SPI flash memory region, which starts at 0x08000000.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41319
2014-06-24 18:13:22 +00:00
John Crispin 79b4598a7f atheros[ar2315-spiflash]: print detected flash size
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41318
2014-06-24 18:13:17 +00:00
John Crispin 8e3b055b2a atheros[ar2315]: don't detect flash size during board initialization
We should not detect actual flash size during board initialization to
find board config at the end of the flash, just use large enough mapping
size (currently 128 mbit). If mapping size is larger than the actual
flash size, than flash will simply be mapped multiple times. This change
simplifies code by removing duplication and saves about 200 bytes of
uncompressed kernel :)

Tested with Ubnt LS2 board equipped with STM 25p32v6p NOR flash (32 mbit).

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41317
2014-06-24 18:13:13 +00:00
John Crispin f8893629ec atheros[ar231x-eth]: merge patch
Merge 3_10-updates.patch into the ar2313_ethernet.patch since it contains
only one ethernet driver fix.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41316
2014-06-24 18:13:09 +00:00
John Crispin d219e055be lantiq: remove deprecated jffs2_nand configuration
As far as I am aware, amongst the lantiq boards, jffs2_nand was
only used on the BTHOMEHUBV2B. Ubi-related modifications to the
device tree for that board mean that the resulting jffs2 images
no longer work, and are no longer required anyway. So I suggest
removing the related configuration, which this patch does.

If anyone else is using jffs2_nand on a lantiq target please speak
up!

Incidentally, for a jffs2 rootfs partition concatenated to the
kernel image to be recognised and mounted correctly on nand
this patch or something equivalent is required:
http://patchwork.openwrt.org/patch/5110/
It is marked as accepted in patchwork but doesn't seem to have
been committed. As far as I am concerned it too is deprecated.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41312
2014-06-24 18:12:52 +00:00
John Crispin aca708e4e6 lantiq: ubinize autoresize flag for rootfs_data
Setting this flag allows rootfs_data to expand on first boot
to fill remaining free space on nand.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41310
2014-06-24 18:12:41 +00:00
Luka Perkov 70a27a518e kernel: update 3.14 to 3.14.8
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41309
2014-06-24 12:27:36 +00:00
Jonas Gorski 43cc8c3ebe brcm63xx: allow bcm963xx and livebox support at the same time
Use the CFE_EPTSEAL to tell them apart at runtime. Added for now only
for the 3.14 until properly tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41296
2014-06-21 19:23:38 +00:00
Jonas Gorski 21d65bb185 brcm63xx: update variant detection patches and fix VARID shift
The variant id field shift was wrong, causing the variant detection
to fail.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41295
2014-06-21 19:23:28 +00:00
Jonas Gorski f695fa358a brcm63xx: fix up borked patch
Fix up patch borked by quilt fuzzy application of patches.

SVN-Revision: 41294
2014-06-21 19:23:18 +00:00
Imre Kaloz e1de4e27c1 coding style cleanups, drop old kernel support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41293
2014-06-21 10:00:07 +00:00
Imre Kaloz 643a8a626d update mamba dts
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41292
2014-06-20 23:05:23 +00:00
Imre Kaloz f11de38d44 make script executable, add WRT1900AC detection
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41291
2014-06-20 22:35:09 +00:00
Imre Kaloz a241853358 define the power led for the WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41288
2014-06-20 19:13:01 +00:00
John Crispin a8d532abf2 octeon: add sysupgrade support for the erlite
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41286
2014-06-20 13:41:16 +00:00
John Crispin fe79b06e6b octeon: build a sysupgrade image for erlite
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41285
2014-06-20 13:41:12 +00:00
John Crispin cf80a59dcc imx6: add sysupgrade support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41277
2014-06-19 14:13:38 +00:00
John Crispin 1a60486acb imx6: the script populating /tmp/sysinfo/ was in the wrong path
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41276
2014-06-19 14:13:34 +00:00
John Crispin e0d57509ad octeon: enable the ext4 feature
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41275
2014-06-19 14:13:30 +00:00
John Crispin e6e024f155 octeon: add basic board detection
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41274
2014-06-19 14:13:20 +00:00
John Crispin 0d5a6fd819 kernel: drop now unused ubi forced detach patch
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41272
2014-06-19 14:13:12 +00:00
John Crispin 9284956ad8 ramips: cleanup some rt305x profiles
move both asus boards to asus.mk
rename HW5503G profile to HW550-3G to match name in image/Makefile
(fixes #16599)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 41271
2014-06-19 14:13:07 +00:00
John Crispin 432f7e52db lantiq: copy rootfs-overlay.ubi to bin/lantiq
At the moment, an rootfs.ubi is copied over to bin/lantiq
but rootfs-overlay.ubi is not. This adds it.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41270
2014-06-19 14:13:04 +00:00
John Crispin 6c46a10246 lantiq: refresh patches
this adds ben's ath9k fixup

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41269
2014-06-19 14:12:59 +00:00
Florian Fainelli 43c0ad0f00 imx6: fix typo on wandboard detection
Revision r41256 introduced a typo (wandaboard => wandboard), but later
revisions expect to match on "wandboard"

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 41262
2014-06-18 16:34:23 +00:00
John Crispin efcec0faaf imx6: use /lib/imx6.sh inside the uci-defaults script
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41257
2014-06-18 10:08:16 +00:00
John Crispin 2773bdfebf imx6: add a script to detect the board name and populate /tmp/sysinfo
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41256
2014-06-18 10:08:12 +00:00
John Crispin 23cdea78d8 ar71xx: Fixes for 951Ui-2HnD board support
WAN and LAN are swapped the wrong way around.  This patch fixes that by adding the 951Ui-2HnD to ar71xx.sh and the relevant entry in 02_network.

This patch also defines the ACT LED as the status LED in diag.sh.

Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41255
2014-06-18 10:08:08 +00:00
John Crispin 5aeb5c1cbc octeon: fix up the cpu flags
Signed-off-by: Martin Fäcknitz <faecknitz@hotsplots.de>

SVN-Revision: 41253
2014-06-18 10:08:01 +00:00
John Crispin 312fca5455 octeon: add 3 upstream patches that fix issues on the esr-lite
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41252
2014-06-18 10:07:57 +00:00
Luka Perkov 5e6024d526 mvebu: be consistent with kernel config file names
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41240
2014-06-17 21:04:45 +00:00
John Crispin 575127fe1c lantiq: DGN3500 (all known variants) factory and sysupgrade image building support
This patch adds factory image building for the DGN3500, all variants,
and fixes sysupgrade images to make them play nice with the sercomm
secondary boot loader.

The factory images can be used directly in the update dialog in the
interface of the stock firmware and via the special Sercomm bootmode
and a special windows flashing utility (allegedly present in the CD
that came with the device -- but it's also compatible with the NSLU2
Upgrade_207_XP utility.) The special bootmode can be activated by
turning the device on while holding the reset button pressed, then
releasing it when the power led starts blinking red and green. Please
notice that if using the 207 utility, it will always report that the
flashing failed even though it completed successfully. Just power
cycle the router manually after the utility reports the failure and
OpenWRT will boot. This same utility (despite reporting failure in
this case too) can revert a DGN3500 (any variant) to the appropriate
stock Netgear firmware.

This patch is a heavily modified version of a package I found on the
OpenWRT forum with a couple fixes and features added -- mainly the
generation of all the different image variants to support all known
models directly, atm known variants are AnnexA-WW, AnnexA-NA and
AnnexB-DE/GR.

I tested the patch successfully on my device.

Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>

SVN-Revision: 41236
2014-06-17 15:38:54 +00:00
Imre Kaloz 85812e21f9 add dummy fixup for 3.10
SVN-Revision: 41234
2014-06-17 15:14:02 +00:00
Imre Kaloz ac91824b36 build images for the WRT1900AC
SVN-Revision: 41233
2014-06-17 15:13:33 +00:00
Imre Kaloz d775e4ef00 preliminary support for the WRT1900AC (work in progress)
SVN-Revision: 41232
2014-06-17 15:13:10 +00:00
Jo-Philipp Wich 93742047af mpc85xx: fix typo in TP-Link WDR4900 profile
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 41229
2014-06-17 15:01:47 +00:00
John Crispin dc5fe5f73f ramips: RT-N56U support fixes and factory image creation
Signed-off-by: Mikko Hissa <mikko.hissa@werzek.com>

SVN-Revision: 41224
2014-06-16 18:57:20 +00:00
John Crispin 3dca5a158d procd: various cleanups to /lib/upgrade/nand.sh
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41222
2014-06-16 18:55:14 +00:00
John Crispin c5461a78d2 kernel/3.1{0, 2, 3, 4}: mtd: m25p80: add support for EON EN25QH128
This flash is used in newer Ubnt UniFi AP Pro

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41219
2014-06-16 18:55:01 +00:00
John Crispin ae8caf216f kernel: replace a ubifs patch by upstream commit
A modified version of 552-ubifs-respect-silent-mount-flag.patch has
been merged upstream. Replace the patch in OpenWrt with the version
which has been merged.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 41218
2014-06-16 18:54:57 +00:00
John Crispin 4d7ed2a8a0 ramips: fixes XDXRN502J reset button
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41217
2014-06-16 18:54:53 +00:00
John Crispin 2fe435081d ramips: add vlan configuration for asiarf awm002-evb
Without this, the ports all end up on vlan 1.  This enables a separate
WAN port that works.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 41216
2014-06-16 18:54:48 +00:00
John Crispin ab390d6c05 ramips: restore AWM002-EVB profile in asiarf.mk
In a recent revision (r41177) John Crispin removed the profile for the
AsiaRF AWM002 eval board while adding another AsiaRF board.  This
patch restores AWM002 and also corrects a misspelling and an
apparently errant reference to an Allnet ALL0239-3G device.

Signed-off-by: Galen Seitz <galens@seitzassoc.com>
Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 41215
2014-06-16 18:54:42 +00:00
John Crispin 85ca75decd lantiq BTHOMEHUBV2B - update dts for automatic detection of ubi partition and rootfs type
This patches the BTHOMEHUB2B device tree to make use of the
new code for automatic detection of the ubi partition and the
rootfs type within it. Gets rid of the ugly alternative bootargs
lines.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 41214
2014-06-16 18:54:38 +00:00
John Crispin e6c46554bb lantiq: fixup vgv7519 usb support
https://dev.openwrt.org/ticket/16800

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41213
2014-06-16 18:54:33 +00:00
Felix Fietkau 841b730f98 kernel: fix pkt_type filter mask for packet sockets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41178
2014-06-13 09:34:03 +00:00
John Crispin 6d213a644d ramips: add asiarf awapn2403 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41177
2014-06-13 09:16:15 +00:00
Steven Barth 285af2ff08 Update UML target to 3.10 and various improvements
Updated target to 3.10.36.
Added mconsole exec patch.
Added pseudo-random MAC patch (from NetKit).

Signed-off-by: Markus Stenberg <markus.stenberg@iki.fi>
Reviewed-by: Steven Barth <steven@midlink.org>

SVN-Revision: 41172
2014-06-12 17:57:19 +00:00
Luka Perkov f45b1a671a kernel: update 3.14 to 3.14.7
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41150
2014-06-11 23:39:54 +00:00
Felix Fietkau 231f15c9db ramips: fix rt2x00 handling of default packages for subtargets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41145
2014-06-11 17:01:19 +00:00
John Crispin e9f664c879 kernel: make sure the new UBIBLOCK symbol does not break builds
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41134
2014-06-11 13:00:17 +00:00
John Crispin 4096a110fb ar71xx: activate the nand sutarget
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41133
2014-06-11 13:00:12 +00:00
John Crispin fe6e2f8e1b ar71xx: fix up kernel config for the nand subtarget
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41132
2014-06-11 13:00:04 +00:00
John Crispin c973fb031e ar71xx: add sysupgrade support for wndr4300
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41131
2014-06-11 13:00:00 +00:00
John Crispin 9a0b4ab4ed ar71xx: remove the explicit ubi.mtd- paramaters and rename ubiroot to ubi
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41130
2014-06-11 12:59:57 +00:00
John Crispin ac5d5cbc79 kernel: add a NAND_SUPPORT symbol
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41122
2014-06-11 12:59:22 +00:00
John Crispin c8d472c37f kernel: backport the ubiblock patches from 3.14->3.10
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41120
2014-06-11 12:59:15 +00:00
John Crispin acbcd5f5b5 kernel: rootfs auto-mount on ubi
Similar to the rootfs hacks on NOR flash devices, this series
introduces support for auto-attaching (ubi device), auto-creating
(ubiblock device) and mounting the "rootfs" (ubifs or squashfs)
volume.
This is needed so OpenWrt can start without relying on the bootloader
to pass the ubi.mtd, ubi.block, rootfs and rootfstype parameters, but
instead auto-detect the root filesystem according to a simple convention.

OpenWrt-specific:
490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
491-ubi-auto-create-ubiblock-device-for-rootfs.patch
492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch
493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch

sent upstream:
552-ubifs-respect-silent-mount-flag.patch
http://lists.infradead.org/pipermail/linux-mtd/2014-May/053893.html

v2: actually retry with MS_RDONLY when mounting read-only ubifs root

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 41119
2014-06-11 12:59:10 +00:00
John Crispin d494983d02 kernel: backport ubiblock support from 3.15
Backport ubiblock support from kernel 3.15 as well as all follow-up
fixes related to ubiblock.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

 create mode 100644 target/linux/generic/patches-3.14/040-UBI-R-O-block-driver-on-top-of-UBI-volumes.patch
 create mode 100644 target/linux/generic/patches-3.14/041-UBI-block-do-not-use-term-attach.patch
 create mode 100644 target/linux/generic/patches-3.14/042-UBI-block-Mark-init-only-symbol-as-__initdata.patch
 create mode 100644 target/linux/generic/patches-3.14/043-UBI-block-Use-u64-for-the-64-bit-dividend.patch
 create mode 100644 target/linux/generic/patches-3.14/044-UBI-rename-block-device-ioctls.patch
 create mode 100644 target/linux/generic/patches-3.14/045-UBI-block-Remove-__initdata-from-ubiblock_param_ops.patch
 create mode 100644 target/linux/generic/patches-3.14/046-UBI-avoid-workqueue-format-string-leak.patch
 create mode 100644 target/linux/generic/patches-3.14/047-UBI-make-UBI_IOCVOLCRBLK-take-a-parameter-for-future.patch

SVN-Revision: 41118
2014-06-11 12:59:06 +00:00
Felix Fietkau 75b4c400c7 atheros: fix too short msleep
Use msleep(20) instead of msleep(10) to make code closer to reality
since msleep can sleep for up to 20ms even we request shorter delay.
All updated calls are located in PCI initialization routine which is
called only once upon device boot. So there should be no performance
issues caused by more longer delay.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41096
2014-06-10 09:06:25 +00:00
Felix Fietkau e49636472d atheros: shorten lines
Wrap lines over 80 chars or make them shorter by other ways.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41095
2014-06-10 09:06:22 +00:00
Felix Fietkau a6cf23b76c atheros: constify some static structures
Constify some static structures as suggested by checkpatch.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41094
2014-06-10 09:06:18 +00:00
Felix Fietkau f363db0094 atheros: avoid __FUNCTION__ usage
Use __func__ instead of gcc specific __FUNCTION__ as suggested by
checkpatch.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41093
2014-06-10 09:06:14 +00:00
Felix Fietkau 70b2a81a2e atheros: trailing statements fixes
Move trailing statements to next line with indentation as suggested by
checkpatch.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41092
2014-06-10 09:06:10 +00:00
Felix Fietkau 0bca3f9547 atheros: spaces fixes
Add missed spaces and remove odd space as suggested by checkpatch.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41091
2014-06-10 09:06:06 +00:00
Felix Fietkau dd31da467f atheros: indent fixes
Various indent fixes suggested by checkpatch: use tabs, use same level
of indentation for switch and case, correct indentation levels.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41090
2014-06-10 09:06:03 +00:00
Felix Fietkau 66c64834f8 atheros: fix includes
Remove some unnecessary includes and use <linux/foo.h> instead of
<asm/foo.h> when it possible as suggested by checkpatch.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41089
2014-06-10 09:05:58 +00:00
Felix Fietkau 90ca9a582d atheros: various printk(...) fixes
Use more particular functions dev_<level> or pr_<level>(...) insead of
direct printk(...) call. Add KERN_LEVEL to calls what missed it.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41088
2014-06-10 09:05:55 +00:00
Felix Fietkau 15a2ebbc38 atheros: various braces fixes
Fix braces location, remove unnecessary empty lines before or after code
block, remove useless braces. All cases are detected by checkpatch.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41087
2014-06-10 09:05:51 +00:00
Felix Fietkau 58d70ff9b3 atheros: do not initialize statics to 0 or false
as suggested by checkpatch.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41086
2014-06-10 09:05:47 +00:00
Felix Fietkau 8b4323ad31 atheros: remove trailing whitespace
as suggested by checkpatch.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41085
2014-06-10 09:05:43 +00:00
Felix Fietkau 3406e402ef atheros: do not assignment in if condition
Remove assignments from if conditions as suggested by checkpatch.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41084
2014-06-10 09:05:40 +00:00
Felix Fietkau 5427e47e59 atheros: remove parentheses around return values
Remove parentheses around return values since return is no a function,
as suggested by checkpatch.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41083
2014-06-10 09:05:36 +00:00
Felix Fietkau 630eac6638 atheros: parenthesis around complex macroses value
Use parenthesis around complex macroses value as suggested by
checkpatch.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41082
2014-06-10 09:05:32 +00:00
Felix Fietkau cb50efa835 atheros: various comments fixes
Fix comment issues detected by checkpatch. Convert C99 // comments to
ordinary /* ... */ comments. Correct block comments style or convert
them to single line comments.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41081
2014-06-10 09:05:28 +00:00
Felix Fietkau ea9360a5c6 atheros: avoid CamelCase
Change fooBar variables names to foo_bar as suggested by checkpatch,
write few tables names in lower case and correctly place __initdata
keyword.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 41080
2014-06-10 09:05:25 +00:00
Felix Fietkau ad97acf46a brcm47xx: merge FEATURES lines in the legacy subtarget
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41053
2014-06-08 09:51:38 +00:00
Felix Fietkau c48140efb8 brcm47xx: fix kmod-usb-brcm47xx build on legacy and mips74k subtargets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41052
2014-06-08 09:45:55 +00:00
Hauke Mehrtens ed7c73fbef brcm47xx: activate some compiler optimizations for 74K CPUs
With this patch the mips74k subtarget will be compiled with optimized
compiler options to generated smaller and faster code. This currently
breaks broadcom-wl, because the binary blob is only compiled with
mipsr1 support.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41050
2014-06-07 17:36:02 +00:00
Felix Fietkau 4b953aa267 brcm47xx: move the low_mem feature flag to the legacy subtarget
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41049
2014-06-07 17:21:30 +00:00
Hauke Mehrtens 717e8b6f3c brcm47xx: remove old gpio and nvram interfaces
These were only used by broadcom-diag any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41048
2014-06-07 17:04:37 +00:00
Hauke Mehrtens cfa350ca39 brcm47xx: mips74k: optimize kernel config
This saves abount 15 kB of compressed kernel size.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41043
2014-06-07 15:42:33 +00:00
Hauke Mehrtens 9dc5fb9103 bcm47xx: use eth0 for switch name
This fixes some strange problems with tg3. I assume that the Ethernet
driver was not brought up if the switch was named switch0.

This was reported and tested by ernesto (Faulp3lz).

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41042
2014-06-07 15:41:41 +00:00
Felix Fietkau dec0d7f025 brcm47xx: add a "legacy" subtarget that is usable for low-end 802.11g devices like WRT54G
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41041
2014-06-07 15:19:40 +00:00
Hauke Mehrtens bffd80e3e1 brcm47xx: add mips74k subtarget for newer devices
All new devices (with MIPS 74K CPU) are based on BCMA SoC and have
Ethernet core supported by bgmac. Create a new subtarget to generate
optimized builds.
This is just a beginning, further tweaks (like kernel configuration)
are still possible. This decreases default root.squashfs by ~128 kB.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41025
2014-06-05 21:25:03 +00:00
Hauke Mehrtens b5d42bc111 brcm47xx: move current target to "generic" subtarget
This allows creating more subtargets and optimize builds per family.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41024
2014-06-05 21:23:58 +00:00
John Crispin 7a03f41940 lantiq: fix eep handling patch
0b79a4a66d17d2c7c12cde8d13637c1b0e5152c2 broke the patch

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41005
2014-06-05 08:19:52 +00:00
Luka Perkov 284a07f748 imx6: kernel: update 3.14 pcie patches
Remove old irq map patch and replace it with the propper upstream patches
allowing IMX6 PCIe devices behind PCIe switches to work properly.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 41004
2014-06-04 23:01:30 +00:00
John Crispin f09ac641d6 lantiq: ath5k fix in wifi and ethernet eeprom handling patch.
ath5k fix in wifi and ethernet eeprom handling patch.

Without the line that adds the patch of_ath5k_eeprom_probe cause a
kernel panic, at least with the ARV4518PW.
Tested only in the modem-router mentioned above.

This patch is based in Bruno's hack present in patch #5454.

Signed off by: Bruno Rodríguez <bruno.rodriguez.1980@gmail.com>
Signed off by: José Vázquez Fernández <ppvazquezfer@gmail.com>

SVN-Revision: 40999
2014-06-04 07:20:22 +00:00
Luka Perkov cdd9e952e5 imx6: ventana: remove non-trunk packages from defaults
The canutils package is in the packages repo and not part of trunk, so we
should not enable them by default.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40991
2014-06-02 21:23:36 +00:00
Luka Perkov be7396bad7 imx6: ventana: add default kernel modules
Add the following kernel modules by default (which are present on most Ventana
baseboards):
 - kmod-leds-gpio (user leds)
 - kmod-sound-core (required as a dependency of the other sound modules)
 - kmod-pps-gpio (Pulse-Per-Second)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40990
2014-06-02 21:23:35 +00:00
Luka Perkov f637a1e562 imx6: update board names per device-tree updates
The Gateworks Ventana board names have been adjusted per upstream patches
to include all IMX6 SoC variants.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40989
2014-06-02 21:23:34 +00:00
Luka Perkov b87016722c imx6: update 3.14 ventana dts with upstream fixes
update the Ventana DTS files with upstream fixes:
 - The 'model' property in the imx-audio-sgtl5000 binding specifies the
   user-visible name of the audio device. This should be something common and
   not baseboard specific.
 - removed obsolete crts
 - fix include typo: The imx6q-gw51xx needs to include imx6qdl-gw51xx.dtsi
 - fix gw52xx clock for sgtl5000 ananlog audio codec
 - fix LVDS mapping for Ventana GW52xx/GW53xx/GW54xx
 - add LVDS backlight for Ventana
 - update model descriptions for all processor variants

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40988
2014-06-02 21:23:32 +00:00
Luka Perkov f689e3cf8b imx6: update 3.10 ventana dts
update the Ventana DTS files with upstream fixes:
 - The 'model' property in the imx-audio-sgtl5000 binding specifies the
   user-visible name of the audio device. This should be something common an
   not baseboard specific.
 - update model descriptions for all processor variants

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40987
2014-06-02 21:23:29 +00:00
Luka Perkov b6c0aca054 kernel: add another new config symbol for kernel 3.14
It was augmented by CONFIG_USB_GADGET...

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40986
2014-06-02 19:48:22 +00:00
Felix Fietkau ae2c9a815a brcm47xx: enable the low-memory feature flag
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40982
2014-06-02 17:04:45 +00:00
Felix Fietkau 2f79cb03c5 ar71xx: fix compile error in r40969, refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40977
2014-06-02 16:24:12 +00:00
John Crispin 680e0c09f3 ar71xx: WNDAP360 adding wifi LED support
I added WIFI LED support (so now AP blinks nicely), I removed WPS
button GPIO (as it doesn't exist) and changed GPIO for reset button.

Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>

SVN-Revision: 40976
2014-06-02 15:02:54 +00:00
John Crispin 5c1105d2a1 ar71xx: add profile and build image for HiWiFi HC6361.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 40975
2014-06-02 14:56:41 +00:00
John Crispin 8a3c713c97 ar71xx: add user-space support for HiWiFi HC6361 board.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 40974
2014-06-02 14:56:35 +00:00
John Crispin 05b73eb22f ar71xx: add kernel support for HiWiFi HC6361.
This board manufactured by HiWiFi has the following features.

 - Atheros 9331 SoC.
 - 16MB flash and 64MB RAM.
 - 4GB eMMC storage via SK6226 USB 2.0 controller.
 - 2 LAN and 1 WAN ethernet ports with LEDs on them.
 - 3 blue LEDs on the front panel.
 - 1 button labeled as "reset".
 - Powered by a USB cable.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 40973
2014-06-02 14:56:24 +00:00
John Crispin 85b889940d ar71xx: add support to TP-LINK TL-WA730RE v1
The TL-WA730RE seems to be almost identical to TL-WA701ND, just
that it comes without PoE and a stock-firmware claiming the device
to be a "Range Extender".

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 40972
2014-06-02 14:45:25 +00:00
John Crispin 599ddc7a85 ar71xx: fix board detection for TL-WA7510N
Detect TL-WA7510N v1 by the board name as defined in mach-tl-wa901nd.c
and add hardware ID to tplink_board_detect

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 40971
2014-06-02 14:45:21 +00:00
John Crispin 06d656be27 ar71xx: enable sysupgrade on wnr2000-v3
tested, works.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 40970
2014-06-02 14:45:17 +00:00
John Crispin 60ec05fdcb ar71xx: add support for dlink dir-615-e1
Dlink dir-615-e1 can use dir-600-a1's image, but the image can't be
uploaded through dlink's normal firmware update web page.

Add profile for dir-615-e1 so the generated image can be uploaded
through the firmware update web page.

Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>

SVN-Revision: 40969
2014-06-02 14:43:35 +00:00
John Crispin 290d01379e ar71xx: adjust OM2P profile for the OpenMesh OM2P-HSv2 board
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 40966
2014-06-02 13:21:52 +00:00
John Crispin 90c5ec6374 ar71xx: add sysupgrade support for OpenMesh OM2P-HSv2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 40963
2014-06-02 13:21:38 +00:00
John Crispin ac3fd59a2b ar71xx: add user-space support for OpenMesh OM2P-HSv2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 40962
2014-06-02 13:21:31 +00:00
John Crispin c9f15772a1 ar71xx: add kernel support for the OpenMesh OM2P-HSv2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 40961
2014-06-02 13:21:26 +00:00
John Crispin c17998a4dd ar71xx: adjust OM2P profile for the OpenMesh OM2Pv2 board
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 40960
2014-06-02 13:21:22 +00:00
John Crispin 71e3d89020 ar71xx: add sysupgrade support for OpenMesh OM2Pv2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 40957
2014-06-02 13:21:07 +00:00
John Crispin c788102ebc ar71xx: add user-space support for OpenMesh OM2Pv2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 40956
2014-06-02 13:21:02 +00:00
John Crispin ef5f37a08d ar71xx: add kernel support for the OpenMesh OM2Pv2 board
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 40955
2014-06-02 13:20:52 +00:00
John Crispin fa48c0db1d lantiq: fix up eth_mac and ath_eep support
this patch got messed up by the last rebase

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40948
2014-06-02 12:45:29 +00:00
John Crispin d29fc40039 x86: Compile xen-pci-frontend as module
modified version of -> http://patchwork.openwrt.org/patch/5535/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40947
2014-06-02 12:45:25 +00:00
John Crispin 3306a4f9ab ralink: fix asiarf/awm002 switch setup
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40939
2014-06-02 12:44:57 +00:00
John Crispin 7437d84814 ralink: add seama image can be upgrade by sysupgrade
generate sysupgrade image by combine two images.
one is kernel image with seama header.
another is root fs image.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 40922
2014-06-02 12:43:49 +00:00
John Crispin 7ba5188fe9 lantiq: Fix ARV7510PW22 etop
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40920
2014-06-02 12:43:43 +00:00
John Crispin d4ec98c2cc lantiq: Fix ARV4518 etop
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40919
2014-06-02 12:43:35 +00:00
John Crispin f933a741a9 target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGC
ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct
var $# (=number of args) here. under normal conditions this had no impact,
but we should at least correct it. the error was observable like this:

root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh
root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh
root@box:~ . /lib/upgrade/platform.sh
root@box:~ . /lib/upgrade/common.sh
root@box:~ platform_check_image /tmp/myfirmware.bin
ash: bad number
root@box:~ echo $?
0

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 40915
2014-06-02 12:43:22 +00:00
John Crispin 712dec1027 ramips: add missing profile for DIR-615-D
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 40911
2014-06-02 12:43:07 +00:00
John Crispin 9b728bebfb ramips: fix not set lan/wan mac address
The first switch case is default case. Then it will only
match default case. cause not update the lan/wan mac address.
And in the default switch case the param lan_mac is empty.
it will case error message 'arithmetic syntax error' when
call macaddr_add function.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 40910
2014-06-02 12:43:04 +00:00
John Crispin 813a7c3827 ralink: Add support for samsung cy-swr1100 wireless router
It is base on rt3662 soc with dual band 802.11n
wireless router. Use rtl8367R switch chip.
This patch adds a profile for this board.
It use seama image header. so i also enable it
on kernel config.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 40908
2014-06-02 12:42:52 +00:00
John Crispin efd09832fe ramips: Support for Teltonika RUT5XX
Hi Hartmut,

Thanks for your feedback, I have reformated the patch accordingly.

Added support for Teltonika RUT5XX hardware.

Signed-off-by: Steffen Weinreich <steve@weinreich.org>

SVN-Revision: 40907
2014-06-02 12:42:48 +00:00
John Crispin 583b908bc7 ralink: Enable Asus RT-N10+ in menuconfig targets
This patch adds "Asus RT-N10+" as a target option in menuconfig. The device has been supported for a while but is currently missing a profile (.mk).
Signed-off-by: Randolph Kuntz <8D961920@galaxymail.org>

SVN-Revision: 40903
2014-06-02 12:41:45 +00:00
Luka Perkov aa2ff3f105 kernel: update 3.14 to 3.14.5
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40901
2014-06-02 09:25:33 +00:00
Zoltan Herpai 1bd75f114f sunxi: add support for Lemaker bananaPi
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40898
2014-06-01 18:44:10 +00:00
Zoltan Herpai bf43c8e717 sunxi: fix typo in uci-defaults network config
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40895
2014-06-01 12:18:53 +00:00
Hauke Mehrtens cdc7ea3337 bcm53xx: add support for the PCIe controller
This patch adds support for the PCIe controller
In addition to the PCIe controller a sprom is now provided by a device
tree driver to bcma from some nvram.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40880
2014-05-29 19:25:40 +00:00
Luka Perkov dfabb76883 kirkwood: cosmetic: move POGOE02 profile to different file
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40873
2014-05-28 21:43:43 +00:00
Luka Perkov 4122af10f9 kirkwood: add support for Linksys EA4500
Support is added only for kernel 3.14 - do not show it until
the switch is made.

Following uboot env changes are needed to make it work on stock uboot:
2014-05-28 21:43:39 +00:00
Felix Fietkau 2108ca0d9a ubifs: remove obsolete CONFIG_UBIFS_FS_XATTR symbol
550-ubifs-symlink-xattr-support.patch contains a reference to the
by now obsolete config symbol CONFIG_UBIFS_FS_XATTR which leads to
the functionality originally added by the patch in r30794 being
left-out during compile since commit 1bdcc63112a0
("UBIFS: remove xattr Kconnfig option") in v3.5.
Fix this by removing the #ifdef from all affected kernels as XATTR
support is now always enabled for UBIFS as well.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 40864
2014-05-27 20:34:03 +00:00
Felix Fietkau 3ab83a078f ar71xx: disable usb workarounds for ar913x again (should fix #16610)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40846
2014-05-25 16:14:16 +00:00
Jo-Philipp Wich f6e7074924 Revert "ar71xx: Fix tagged+untagged operation on AR8327N (#12181)"
Revert the tagged + untagged rework for now due to regressions in
vlan setup on certain AR83xx switches.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 40842
2014-05-24 17:04:12 +00:00
Felix Fietkau 5343c7694e ar71xx: enable usb quirks for all chipidea based devices
The most important one is qca_force_host_mode, which also sets the
'Stream Disable' bit in the usbmode register.

Fixes usb stability issues on AR933x and AR7241/AR7242

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40841
2014-05-24 08:01:42 +00:00
Felix Fietkau 83dc560621 ar71xx: fix typo in tl-wr710n mac setup (fixes #16469)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40840
2014-05-24 08:01:33 +00:00
Felix Fietkau 32d1e0ed2c kernel: add a ssb backport required for a new mac80211 update
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40833
2014-05-23 18:48:31 +00:00
Steven Barth 874b26933d Add missing bracket in MAP-E FMR kernel support
SVN-Revision: 40830
2014-05-23 08:53:38 +00:00
Luka Perkov 3bb20dedcd kirkwood: add Pogoplug E02 kernel support for 3.14
This also fixes a typo in the UBIFS_OPTS

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 40827
2014-05-23 08:16:56 +00:00
Steven Barth 3224643614 Add kernel support for MAP-E FMRs
SVN-Revision: 40822
2014-05-22 20:04:48 +00:00
Luka Perkov 55131c5f42 kirkwood: add support for 3.14
* support for pogoplug_e02 is missing

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40808
2014-05-21 12:04:09 +00:00
Felix Fietkau 8513629e3e mac80211: update to wireless-testing 2014-05-19
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40800
2014-05-20 09:35:17 +00:00
Jo-Philipp Wich 443b2dfe3c ar71xx: Fix tagged+untagged operation on AR8327N (#12181)
Replace the global "vlan_tagged" variable with an array storing the
tagging state per vlan.

The code was taken from #12181, tested and cleaned up by Saverio Proto
with additional bug fixes supplied by Álvaro Fernández.

Tested-by: Jo-Philipp Wich <jow@openwrt.org>
Signed-off-by: Saverio Proto <zioproto@gmail.com>
Signed-off-by: Álvaro Fernández <noltari@gmail.com>

SVN-Revision: 40777
2014-05-19 15:48:18 +00:00
Luka Perkov 645596489f kernel: update 3.14 to 3.14.4
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40769
2014-05-14 21:49:27 +00:00
Hauke Mehrtens 16b6db7055 brcm47xx: profiles: fix white spaces (s/ $//)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 40763
2014-05-14 10:09:31 +00:00
Hauke Mehrtens 1d878cabf2 brcm47xx: image: respect device flash block size
We should be more careful and don't generate 128K JFFS2 images for
devices with flashes using 64K blocks (nor the other way).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 40762
2014-05-14 10:08:56 +00:00
Hauke Mehrtens 4cd010a712 brcm47xx: image: document some defines arguments
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 40761
2014-05-14 10:08:22 +00:00
Hauke Mehrtens de2585c79b kernel-3.14: add missing config symbols
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 40760
2014-05-14 09:55:55 +00:00
Luka Perkov e37e0f17ed imx6: make boardname consistent with other targets
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 40758
2014-05-13 21:56:05 +00:00
Luka Perkov dce36465ad imx6: drop support for 3.13
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40754
2014-05-12 12:29:22 +00:00
Luka Perkov aa3d844d34 imx6: add support for 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40753
2014-05-12 12:29:19 +00:00
Hauke Mehrtens a49ef16272 kernel: update to kernel 3.14.3
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40736
2014-05-08 21:53:27 +00:00
Hauke Mehrtens 6ae2278463 kernel: add missing config options for kernel 3.14
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40735
2014-05-08 21:52:55 +00:00
Hauke Mehrtens ff12bcef16 kernel: fix some compile warnings with kernel 3.14
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40734
2014-05-08 21:52:40 +00:00
Hauke Mehrtens 100e795bcc kernel: fix warning in swconfig.c with kernel 3.14
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40733
2014-05-08 21:52:19 +00:00
Hauke Mehrtens f5e5477c81 kernel: modify mtd related patches for 3.14
The change is the same as ("kernel/generic: modify mtd related
patches"). Since these files are under files directory, not a files
directory of specific kernel version, better to also change them. So
it will avoid adding files to future specific files directory
(e.g. files-3.14) for this mtd related change.

Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>

SVN-Revision: 40732
2014-05-08 21:52:04 +00:00
Hauke Mehrtens c09007c1af kernel/generic: modify mtd related patches for 3.14
Function register_mtd_parser always returned 0 (at least since v3.3)
before being changed to return void in v3.14-rc1~65^2~93 (mtd: make
register_mtd_parser return void), so it's not needed to check the
return value of this function. Also add __init flag to caller.

This fix compile errors in 3.14 kernel like:
drivers/mtd/mtdsplit_seama.c: In function 'mtdsplit_seama_init':
drivers/mtd/mtdsplit_seama.c:99:2: error: void value not ignored as it ought to be
  return register_mtd_parser(&mtdsplit_seama_parser);
  ^

Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>

SVN-Revision: 40731
2014-05-08 21:51:36 +00:00
Felix Fietkau 5ab4fe9c0e lantiq: strip FCS from received ethernet frames on XRX200
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40719
2014-05-07 18:36:58 +00:00
Florian Fainelli 21b14da88f rb532: Fix ext4 and squashfs images
Signed-off-by: Roman Yeryomin <roman@advem.lv>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 40717
2014-05-07 01:16:14 +00:00
Felix Fietkau 6142d061b5 lantiq: support loading the dsl firmware from a flash partition as a raw gzipped tarfile
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40715
2014-05-06 21:06:22 +00:00
Felix Fietkau 4919affbd4 x86_64: enable high res timers by default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40698
2014-05-05 18:44:46 +00:00
Felix Fietkau 59fc308945 x86: enable high res timers by default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40697
2014-05-05 18:44:38 +00:00
Felix Fietkau b4d93a52cf ar71xx/ath9k: fix reading the WMAC revision on AR953x (fixes #15581)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40695
2014-05-04 23:26:20 +00:00
Zoltan Herpai 0c2f0c6a3b mxs: rename files so that profiles are sorted alphabetically
While at it, make spelling at little bit more consistent,
at least for my taste :-)

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 40679
2014-05-03 14:56:25 +00:00
Zoltan Herpai 18a7636c9f mxs: fix typo in patch filename
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 40678
2014-05-03 14:37:02 +00:00
Hauke Mehrtens c4ecc47f41 kernel: unify the two kmod-usb-mxs-phy packages
There are two packages with the name kmod-usb-mxs-phy in OpenWrt which
causes warnings on every build.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40663
2014-05-02 21:13:21 +00:00
Hauke Mehrtens d064b747af kernel: add missing config options
These options are missing and were spotted by the buildbots.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40661
2014-05-02 21:08:22 +00:00
Zoltan Herpai 96446df6a6 octeon/mpc83xx: remove CONFIG_NETWORK_FILESYSTEMS override
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40642
2014-05-01 18:49:58 +00:00
Hauke Mehrtens e2cd04bfb3 kernel: fix compile error with gcc-4.8 and kernel 3.3
With gcc-4.8 I get a compile error with kernel 3.3.
This patch fixes this problem by backporting a patch from a more recent kernel version.

  CC      arch/mips/mm/page.o
arch/mips/mm/page.c:89:6: error: 'clear_page' alias in between function and variable is not supported
 void clear_page(void *page) __attribute__((alias("clear_page_array")));
      ^
arch/mips/mm/page.c:84:12: error: 'clear_page_array' aliased declaration [-Werror]
 static u32 clear_page_array[0x120 / 4];
            ^
arch/mips/mm/page.c:108:6: error: 'copy_page' alias in between function and variable is not supported
 void copy_page(void *to, void *from) __attribute__((alias("copy_page_array")));
      ^
arch/mips/mm/page.c:102:12: error: 'copy_page_array' aliased declaration [-Werror]
 static u32 copy_page_array[0x540 / 4];
            ^
arch/mips/mm/page.c:108:6: error: 'copy_page' alias in between function and variable is not supported
 void copy_page(void *to, void *from) __attribute__((alias("copy_page_array")));
      ^
arch/mips/mm/page.c:102:12: error: 'copy_page_array' aliased declaration [-Werror]
 static u32 copy_page_array[0x540 / 4];
            ^
arch/mips/mm/page.c:89:6: error: 'clear_page' alias in between function and variable is not supported
 void clear_page(void *page) __attribute__((alias("clear_page_array")));
      ^
arch/mips/mm/page.c:84:12: error: 'clear_page_array' aliased declaration [-Werror]
 static u32 clear_page_array[0x120 / 4];
            ^
cc1: all warnings being treated as errors
make[7]: *** [arch/mips/mm/page.o] Error 1

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40619
2014-05-01 13:07:44 +00:00
Zoltan Herpai 5e47b57e57 sunxi: various a13 changes - add rtl8192cu into A13 Olinuxino profile - make wlan0 the default interface
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40617
2014-05-01 10:23:55 +00:00
Zoltan Herpai 3bcb308b22 sunxi: add rtl8192cu to pcDuino profile
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40616
2014-05-01 10:02:43 +00:00
Zoltan Herpai c754682724 sunxi: add default network config for missing boards
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40612
2014-04-30 22:04:34 +00:00
Zoltan Herpai e87a753a10 sunxi: add rtl8188eu into pcduino v3 profile
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40610
2014-04-30 21:54:47 +00:00
Zoltan Herpai 186b5655d0 sunxi: add board support for LinkSprite pcDuino v3
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40606
2014-04-30 19:50:15 +00:00
Hauke Mehrtens 31ccc84c37 kernel: add missing config options
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40599
2014-04-29 21:03:00 +00:00
Hauke Mehrtens fe38dcf8f3 at91: Add AT91 board and model name to /tmp/sysinfo
From 9158e3282db592e78fb32a2c8a0903ef21b97f5c Mon Sep 17 00:00:00 2001
 From: Owen Kirby <osk@exegin.com>
 Date: Fri, 11 Apr 2014 18:28:56 -0700
 Subject: [PATCH 3/3] [at91] Add AT91 board and model name to /tmp/sysinfo.

This patch extracts the board name and model information from the /proc/device-tree
node in order to provide something a little more friendly on the LuCI sysinfo page
than just "AT91SAM9 (Device Tree)"

Signed-off-by: Owen Kirby <osk@exegin.com>

SVN-Revision: 40598
2014-04-29 21:02:40 +00:00
Hauke Mehrtens b5f9e1632b at91: AT91SAM9G20-EK fixes
From 272f548fe8d0b811e0589e535f650f0507f6bccd Mon Sep 17 00:00:00 2001
 From: Owen Kirby <osk@exegin.com>
 Date: Fri, 11 Apr 2014 17:59:55 -0700
 Subject: [PATCH 2/3] [at91] AT91SAM9G20-EK fixes.

While testing the 3.10 kernel update, I found that the out-of-the-box device tree for the
the AT91SAM9G20EK uses a UBIFS rootfs and stores the DTB separately from the zImage.

Signed-off-by: Owen Kirby <osk@exegin.com>

SVN-Revision: 40597
2014-04-29 21:02:05 +00:00
Hauke Mehrtens f6cd23364b Update AT91 kernel to 3.10.34
From 2064e6d069ec8df7f5e988547fe7f2a1a7ad890f Mon Sep 17 00:00:00 2001
 From: Owen Kirby <osk@exegin.com>
 Date: Thu, 10 Apr 2014 19:02:15 -0700
 Subject: [PATCH 1/3] [at91]  Update AT91 kernel to 3.10.34.

This patch updates the kernel of the AT91 target to version 3.10.34.

Signed-off-by: Owen Kirby <osk@exegin.com>

SVN-Revision: 40596
2014-04-29 21:00:50 +00:00
Felix Fietkau a12ad3ecf1 atheros: remove useless get_c0_compare_int fix
Remove get_c0_compare_int fix which is useless for latest kernels.

Tested on Ubnt Bullet2, which could successfully boot without this
workaround.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 40593
2014-04-29 16:19:36 +00:00
Felix Fietkau 2603c9045d cns3xxx: ethernet - revert: clean up tx descs only when needed
This reverts commit 0772ab938c0aedd7f4cc7127059d6ce8cf929dfa.

Trying to optimize calls to eth_complete_tx in this fasion causes a regression
where when sending only the tx queue can get disabled until a packet is
received. This original call to eth_schedule_poll() is scheduled so it
should not cause a performance issue.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40592
2014-04-29 15:52:12 +00:00
Hauke Mehrtens b6ad77229f kernel: deactivate fs cache config option
r40587 added some kernel config options, on which these two ones depend.
This fixes the build of the buildbots.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40588
2014-04-28 21:40:09 +00:00
Zoltan Herpai eccbcc7936 mxs: enable usbgadget feature for Duckbills
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Acked-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40585
2014-04-28 07:43:29 +00:00
Hauke Mehrtens 1c2dbe4e94 bcm53xx: add default config for switch
This scripts adds a default config for the switch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40565
2014-04-23 22:02:18 +00:00
Hauke Mehrtens d89aa2c3d6 bcm53xx: add initial support for kernel 3.14
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40564
2014-04-23 21:53:50 +00:00
John Crispin 4a7a0d2536 ralink: add dir-645 to the eeprom hotplug script
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40561
2014-04-23 07:52:56 +00:00
John Crispin 720a0a1df1 ramips: register clock device for the WMAC on RT3883
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40557
2014-04-23 07:51:57 +00:00
John Crispin cd5f3584e2 ramips: Add support for the 7Links PX-4885 wireless router.
The 7Links PX-4885 is a small battery-powered wireless router.
It is based on a RT5350F WiSoC and features one ethernet port and one
USB port. It is a Hame MPR-A1 clone, except it has different GPIOs,
a different battery and more RAM (32 MB).
This patch adds a profile for this board, the corresponding device tree
file and the adequate base-files changes (incl. sysupgrade).

Signed-off-by: Hugo Grostabussiat <bonstra@bonstra.fr.eu.org>

SVN-Revision: 40554
2014-04-22 08:08:51 +00:00
John Crispin 4f3c740110 lantiq: BT Home Hub 2B - overlayfs on top of ubi
BT Home Hub 2B: use overlayfs on top of ubi.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 40553
2014-04-22 08:08:46 +00:00
John Crispin 284ada8a3e ramips: build factory-compatible image for AR725W
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 40552
2014-04-22 08:08:42 +00:00
John Crispin cb91087991 ramips: add Airlink101 AR725W userland support
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 40550
2014-04-22 08:08:35 +00:00
John Crispin 2b2d274bfa ramips: Add Airlink101 AR725W board support
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 40549
2014-04-22 08:08:31 +00:00
John Crispin 5836cde0e0 Fix vr9_phy22f_a2x.bin firmware linking
vr9_phy22f_a2x.bin needs to be linked in order to get ethernet support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40543
2014-04-22 08:08:06 +00:00
John Crispin 1b96cf30a9 linux/generic: add MIB counters and port status to ADM6996 switch
This patch adds port status information and MIB counters to the ADM6996
switch driver.

The driver supports also the older ADM6996L-variant, but I'm not able to
test this patch on that chip. According to the datasheet the same
registers exist there as well, so I think it should work, but any
feedback is appreciated.

Signed-off-by: Matti Laakso <malaakso at elisanet.fi>

SVN-Revision: 40542
2014-04-22 08:08:02 +00:00
John Crispin cdc53e2ec9 lantiq: fix maximum ethernet header length
The total ethernet frame length should be written to the hardware
register LTQ_ETOP_IGPLEN instead of just the value of the MTU. This
patch fixes network issues on various Danube boards, especially when
VLAN tagging is enabled.

Signed-off-by: Matti Laakso <malaakso at elisanet.fi>

SVN-Revision: 40541
2014-04-22 08:07:53 +00:00
Zoltan Herpai 248678fccd add missing symbols in prepping for afs patchset
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40540
2014-04-21 18:16:03 +00:00
Zoltan Herpai 86e77c57f2 add missing symbols in prepping for afs patchset
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40539
2014-04-21 18:14:17 +00:00
Zoltan Herpai d2b3c52238 add missing symbols in prepping for afs patchset
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40538
2014-04-21 18:13:19 +00:00
Luka Perkov b58e65f2ee imx6-gateworks: enable new canbus packages
The canbus package was recently changed to a more active project. This patch
updates the default package names to include the same functionality as before.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40531
2014-04-19 21:39:04 +00:00
John Crispin c4aae8fbc5 lantiq: ARV7519RW22: several fixes
- Fix ethernet ports.
- Clean DTS files.
- WiFi is lantiq based (not supported yet), remove ath9k.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40519
2014-04-16 12:01:09 +00:00
Zoltan Herpai ba62f78e2e sunxi: remove mainlined patches
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 40512
2014-04-14 21:36:39 +00:00
Gabor Juhos 1374e5a721 ar71xx: rb91x: fix ethernet packet loss issues
The RB91x boards are suffering from ethernet packet loss after a cold
boot. The cause of the problem is that the AR8035 PHYs requires special
register settings to work reliably on these boards.

Enable the RGMII TX, RX delays and disable SmartEE functionality of
the AR8035 PHYs. Also enable the RXD delay in the ETH_CFG register
to fix the issue.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40509
2014-04-13 20:41:52 +00:00
Gabor Juhos 46a8af4c47 ar71xx/mikrotik: enable the AT803x PHY driver
It will be used on the RB91x boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40508
2014-04-13 20:41:51 +00:00
Gabor Juhos 02ea5b9e56 ar71xx: allow to configure AR803x PHYs via platform data
Add a patch for the at803x phy driver, in order to be able
to configure some register settings via platform data.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40507
2014-04-13 20:41:50 +00:00
Gabor Juhos 27dec09907 ar71xx: add phy_mmd_{read,write} helpers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40506
2014-04-13 20:41:48 +00:00
Gabor Juhos 6a0f8ea201 ar71xx: enable console on the RB91x boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40505
2014-04-13 20:41:42 +00:00
John Crispin 010dcd092f ralink: add port_init for rt2880
Forgotten patch to fix ethernet for rt2880.
Based on previously submitted patch from Claudio.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40504
2014-04-13 18:01:08 +00:00
Gabor Juhos 0d7197116e ar71xx: add profile and build image for the ZyXEL NBG6716 board
Signed-off-by: André Valentin <avalentin@marcant.net>
Patchwork: http://patchwork.openwrt.org/patch/5101/
[juhosg: remove the non-existing zyxelnand subtarget specific stuff]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40502
2014-04-13 08:29:09 +00:00
Gabor Juhos ecec091d33 ar71xx: add user-space support for the ZyXEL NBG6716 board
Signed-off-by: André Valentin <avalentin@marcant.net>
Patchwork: http://patchwork.openwrt.org/patch/5101/
[juhosg: use zyxel prefix in LED names]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40500
2014-04-13 08:29:07 +00:00
Gabor Juhos a5e398abad ar71xx: add kernel support for ZyXEL NBG 6716
With this patch OpenWRT supports the following on the ZyXEL NBG 6716:
-WiFi 2G (ath9k)
-WiFi 5G (ath10k)
-NAND flash
-2 Ethernet interfaces
-USB 2.0
-LEDs including switch
-reasonale defaults at first boot

Signed-off-by: André Valentin <avalentin@marcant.net>
Patchwork: http://patchwork.openwrt.org/patch/5101/
[juhosg:
  - rename and refresh kernel patch,
  - fix a few typos,
  - change button key codes,
  - use zyxel prefix in LED names]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40499
2014-04-13 08:29:05 +00:00
John Crispin 9fbbd04f45 lantiq: enable switch on td8970
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40498
2014-04-12 21:22:21 +00:00
John Crispin f2b0a6365e Fix ARV7519RW images
This patch moves ARV7519RW definitions to VR9 section from the AR9 section and removes a whitespace that breaks jffs2 image generation.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40495
2014-04-12 21:22:08 +00:00
John Crispin 7ae1d573ae Fix Asus rt-n15 board support
* gpio leds and buttons
* ethernet

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40494
2014-04-12 21:22:04 +00:00
John Crispin 3d6ba83fe4 rt2880 DT fixes
* add pinctrl
* fix ethernet port
* make wifi available by default

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40493
2014-04-12 21:22:00 +00:00
John Crispin fa86c30538 Fix pinmux-rt2880
The last arg to FUNC() is count, not last pin.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40492
2014-04-12 21:21:56 +00:00
John Crispin 73160c1ad6 Add wmac clock for rt2880
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40491
2014-04-12 21:21:53 +00:00
John Crispin 72803e0e27 Don't try to generate whr-g300n image if it's going to be more than 4M
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 40489
2014-04-12 21:21:44 +00:00
Gabor Juhos 22916814e3 ar71xx: build firmware image for the WNDR3700 v4 board
Based on the the WNDR3700v4 support patch from Ralph Perlich:
  http://patchwork.openwrt.org/patch/4763/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40481
2014-04-12 20:22:41 +00:00
Gabor Juhos a67578ce33 ar71xx/image: allow to use more arguments for some macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40480
2014-04-12 20:00:37 +00:00
Gabor Juhos 4149ab5193 ar71xx: wndr4300: indicate WNDR3700v4 in the kernel support files
Apart from the wireless chip, the WNDR3700 v4 and the WNDR4300
is the same device. Indicate this in the kernel files.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40479
2014-04-12 19:58:23 +00:00
Gabor Juhos 7b85e2e527 ar71xx: wndr4300: enable 5V power for the USB port
The 5V power of the USB is controlled by a GPIO pin of
the external WiFi chip. Setup the GPIO bitmasks in the
platform data of the WiFi chip to ensure that the 5V
power gets enabled by the ath9k driver.

Based on the the WNDR3700v4 support patch from Ralph Perlich:
  http://patchwork.openwrt.org/patch/4763/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40478
2014-04-12 19:58:20 +00:00
Gabor Juhos ed72141fd4 ar71xx: wndr4300: use KEY_RFKILL code for the Wireless button
Based on the the WNDR3700v4 support patch from Ralph Perlich:
  http://patchwork.openwrt.org/patch/4763/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40477
2014-04-12 17:53:34 +00:00
Gabor Juhos b971a4b5b9 ar71xx: add default LED config for WiFi LEDs on the WNDR4300
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40476
2014-04-12 17:42:36 +00:00
Gabor Juhos 4fe71cedfe ar71xx: wndr4300: add LED for 2.4Ghz wifi interface
Based on the the WNDR3700v4 support patch from Ralph Perlich:
  http://patchwork.openwrt.org/patch/4763/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40475
2014-04-12 17:42:35 +00:00
Gabor Juhos db123a8a21 ar71xx: wndr4300: select GPIO_OUT functionality for LED GPIOs
The bootloader does not initializes the output function
correctly for all LEDs. DO that from the board setup code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40474
2014-04-12 17:42:34 +00:00
Gabor Juhos 9b7b57aeb4 ar71xx: wndr4300: change 'orange' to 'amber' in LED color names
The hardware manual says amber so change the color part of
the LED names to reflect that. Also update the constant names.

Based on the the WNDR3700v4 support patch from Ralph Perlich:
  http://patchwork.openwrt.org/patch/4763/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40473
2014-04-12 17:42:33 +00:00
Gabor Juhos a93c87d772 ar71xx: fix typos in TP-Link rssileds definition
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/5109/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40472
2014-04-12 16:01:45 +00:00
Gabor Juhos 087547d3e2 ar71xx: add rssileds for Ubiquiti XM boards
Adds support for the received signal strength indicator LEDs of the
Bullet M, Nanostation M and Rocket M devices.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/5108/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40471
2014-04-12 16:01:43 +00:00
Gabor Juhos f79b613934 x86/net5501: remove broken flag
According to Christophe, the kernel boots on the Soekris net5501
board.

Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40468
2014-04-12 12:05:18 +00:00
Gabor Juhos d2812cb036 kernel: update 3.10 to 3.10.36
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40467
2014-04-12 11:59:07 +00:00
Gabor Juhos 17f848538c ar71xx: fix image generation
Move the comments out from the shell script to fix build
breakage introduced in r40464.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40466
2014-04-12 11:59:05 +00:00
Gabor Juhos cd75606712 ar71xx: avoid spurious restarts caused by the watchdog on AR934x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40465
2014-04-12 10:21:04 +00:00