hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
22,052 Commits
5 Branches
29 Tags
202 MiB
Commit Graph

327 Commits (c57f66f745ea2492c06355f1d285d23acadc9146)

Author SHA1 Message Date
Gabor Juhos 21c8d63505 ramips: add support for Belkin F5D8235 v2 board 
No support for usb for now.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 24126
 2010-11-24 10:01:23 +00:00
Gabor Juhos 64b16b9f34 ramips: Use NET_IP_ALIGN instead of hardcoding 2 
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24124
 2010-11-24 10:01:18 +00:00
Gabor Juhos 624cfc5c91 ramips: DMA map the correct RX skb size 
The skb_reserve call prior to DMA mapping the RX skb reduced the skb
data len by 2. To not allow DMA to write behind the skb we should pass
the correct skb data len to the device.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24123
 2010-11-24 10:01:16 +00:00
Gabor Juhos f833e399f2 ramips: Don't trigger BUG_ON due to skb allocation failure 
Instead just drop the rx'ed frame silently and reuse the already
available buffer.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24122
 2010-11-24 10:01:12 +00:00
Gabor Juhos c6e4124855 ramips: Remove unnecessary skb_put 
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 24121
 2010-11-24 10:01:08 +00:00
Gabor Juhos 69355ee10e ramips: Allow ethernet interface to be taken down and up again 
Taking the ramips ethernet interface down and up again resulted in the
driver not receiving any frames anymore. Fix this by correctly disabling
interrupts in the hw on ifdown.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 23243
 2010-10-05 14:10:34 +00:00
Gabor Juhos e5b081335e ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205) 
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).

Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>

SVN-Revision: 23129
 2010-09-27 14:43:34 +00:00
Gabor Juhos 462dabc7f5 ramips: add support for Sparklan WCR-150GN board 
This patch adds support for Sparklan WCR-150GN board.
Network configuration should be tweaked to make it work fully. The
reason it's not in this patch is that ramips target should be modified
to support different /etc/config/network files for different boards.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 22658
 2010-08-15 09:43:07 +00:00
Gabor Juhos 2e45ce264d ramips: register ethernet device on the RT-N15 
SVN-Revision: 22213
 2010-07-15 19:45:46 +00:00
Gabor Juhos c2ebadc504 ramips: add generic ethernet device for the RT288x 
SVN-Revision: 22212
 2010-07-15 19:45:43 +00:00
Gabor Juhos 0d8c036e56 ramips: add mdio_cfg configuration for the ethernet driver 
SVN-Revision: 22211
 2010-07-15 19:45:40 +00:00
Gabor Juhos d14e9e706e ramips: Fix bridging in ramips ethernet driver 
Bridging between the ramips ethernet driver and rt2800pci was somewhat
broken. Frames received by the ethernet driver which were passed to the
wifi driver for transmission were sometimes corrupted or sent out with
huge delays.

The reason for this is the missing assignment of skb->tail in the ramips
ethernet driver's rx path resulting in skb->tail pointing to skb->data.
Since skb->tail is used by mac80211 it writes into skb->data which messes
up the frames content.

Fix this by using skb_put to correctly set skb->len and skb->tail.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 22172
 2010-07-13 16:52:07 +00:00
Gabor Juhos 27375c5139 ramips: protect GPIO register access with a spinlock 
SVN-Revision: 22171
 2010-07-13 16:52:04 +00:00
John Crispin 971b7ff50e Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set. 
Signed-off-by: Helmut Schaa

SVN-Revision: 21643
 2010-05-31 11:57:32 +00:00
Gabor Juhos c24397b385 ramips: merge slab patch 
SVN-Revision: 21607
 2010-05-28 19:45:28 +00:00
Gabor Juhos 7ac21ada55 ramips: use COMMAND_LINE_SIZE directly 
SVN-Revision: 21606
 2010-05-28 19:45:24 +00:00
Gabor Juhos 60cbdbb686 ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons 
SVN-Revision: 21083
 2010-04-22 09:25:37 +00:00
Gabor Juhos a423c3abee ramips: annotate device register function prototypes with __init 
SVN-Revision: 20627
 2010-03-31 08:40:28 +00:00
Gabor Juhos a9f313edea ramips: register wifi device for the RT2880 based boards 
SVN-Revision: 20625
 2010-03-31 08:40:23 +00:00
Gabor Juhos 9f3d673dbc ramips: add wifi device for the RT2880 as well 
SVN-Revision: 20624
 2010-03-31 08:40:20 +00:00
Gabor Juhos 1c25cfcde0 ramips: register wifi device on the rt305x based boards 
SVN-Revision: 20616
 2010-03-30 21:24:10 +00:00
John Crispin 6f4052abe0 The ralink rt305x board has a wireless card that can be used with the rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> 
SVN-Revision: 20599
 2010-03-30 12:04:05 +00:00
John Crispin 3ad14f304e Fix the base address of the wireless card. Otherwise it is not possible to register a platform wireless device as it overlaps with something else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> 
SVN-Revision: 20596
 2010-03-30 10:06:05 +00:00
Gabor Juhos 4267623e2e ramips_eth: cleanup mac_address changing 
SVN-Revision: 19464
 2010-01-31 17:56:36 +00:00
Gabor Juhos b16aaf5fac ramips_eth: update register offsets 
SVN-Revision: 19463
 2010-01-31 17:56:33 +00:00
Gabor Juhos 72b08b729a ramips_eth: pass sys_clk via platform_data 
SVN-Revision: 19462
 2010-01-31 17:56:30 +00:00
Gabor Juhos 9ab88ce62d ramips_eth: add helper functions to {ed,dis}able interrupts 
SVN-Revision: 19446
 2010-01-31 12:48:53 +00:00
Gabor Juhos 224edd2575 ramips_eth: remove unnecessary typecasts 
SVN-Revision: 19445
 2010-01-31 12:48:51 +00:00
Gabor Juhos 8aceaf96be ramips_eth: simplify tx_next computation 
SVN-Revision: 19444
 2010-01-31 12:48:48 +00:00
Gabor Juhos 21b06bd2c0 ramips_eth: simplify tx descriptor initialization 
SVN-Revision: 19443
 2010-01-31 12:48:46 +00:00
Gabor Juhos d0fb66e3a4 ramips_eth: pass 'raeth_priv' struct directly to dma specific functions 
SVN-Revision: 19442
 2010-01-31 12:48:43 +00:00
Gabor Juhos f0be6ab20c ramips_eth: convert to use netdev_ops 
SVN-Revision: 19440
 2010-01-31 12:48:38 +00:00
Gabor Juhos d37975f6b2 ramips_eth: fix invalid register writes 
SVN-Revision: 19417
 2010-01-30 15:26:02 +00:00
Gabor Juhos 43e1dd85c2 ramips_eth: move memset call out from the loop 
SVN-Revision: 19416
 2010-01-30 15:25:59 +00:00
Gabor Juhos ea4ce3b6fd ramips_eth: header file cleanup 
SVN-Revision: 19415
 2010-01-30 15:25:57 +00:00
Gabor Juhos 67cd819da6 ramips_eth: coding style cleanup 
SVN-Revision: 19414
 2010-01-30 15:25:55 +00:00
Gabor Juhos a4e85bbceb ramips: register gpio buttons on the Fonera 2.0N board 
SVN-Revision: 19413
 2010-01-30 15:25:52 +00:00
Gabor Juhos 8823482a02 ramips: register gpio buttons on the WHR-G300N board 
SVN-Revision: 19412
 2010-01-30 15:25:49 +00:00
Gabor Juhos 35f47a3654 ramips: register gpio buttons on the V22RW-2x2 board 
SVN-Revision: 19411
 2010-01-30 15:25:47 +00:00
Gabor Juhos 30a397fd5e ramips: register gpio buttons on the DIR-300 revB board 
SVN-Revision: 19410
 2010-01-30 15:25:44 +00:00
Gabor Juhos f9b053e87f ramips: fix wrong base addresses for the RT288x 
SVN-Revision: 19409
 2010-01-30 15:25:41 +00:00
Gabor Juhos 8448caa6ad ramips: include 'linux/leds.h' from 'dev-gpio-leds.h' 
SVN-Revision: 19408
 2010-01-30 15:25:36 +00:00
Gabor Juhos 94c9590e91 ramips: rename dev_gpio_leds.h to dev-gpio-leds.h 
SVN-Revision: 19407
 2010-01-30 15:25:33 +00:00
Gabor Juhos 55185915de ramips: cleanup WZR-AGL300NH board support file 
SVN-Revision: 19406
 2010-01-30 15:25:29 +00:00
Gabor Juhos 0530dd9849 ramips: register gpio-buttons on the RT-N15 board 
SVN-Revision: 19405
 2010-01-30 15:25:25 +00:00
Gabor Juhos 9327f02b7b ramips: add common gpio-buttons device 
SVN-Revision: 19404
 2010-01-30 15:25:20 +00:00
Gabor Juhos 4af1f533bb ramips: register rtl8366s device on the RT-N15 board 
SVN-Revision: 19403
 2010-01-30 15:25:16 +00:00
Gabor Juhos e2dde81ead ramips: sanitize return value of ramips_gpio_get 
SVN-Revision: 19401
 2010-01-30 15:25:08 +00:00
Gabor Juhos af9f40e60d ramips: update mips multi-machine stuff 
SVN-Revision: 19400
 2010-01-30 15:25:03 +00:00
Jo-Philipp Wich 6351d88e29 add initial support for the WZR-AGL300NH - patch by Joonas Lahtinen <joonas.lahtinen@gmail.com> 
SVN-Revision: 19321
 2010-01-24 23:31:49 +00:00
Gabor Juhos b624dec41b ramips: register ethernet device on the WHR-G300N and V22RW-2x2 boards 
SVN-Revision: 18229
 2009-10-30 15:15:41 +00:00
John Crispin 9364f83dbc missing header file changes, and fix mtu value 
SVN-Revision: 18220
 2009-10-30 09:18:40 +00:00
John Crispin ff5deeef08 fixes rx path for eth, spinlock it, increases buffer size, board now survives ping -f 
SVN-Revision: 18212
 2009-10-29 21:08:11 +00:00
John Crispin 135111a05b hopefully fixes dma issues seen on ethernet driver when under high load 
SVN-Revision: 18203
 2009-10-29 12:51:45 +00:00
Gabor Juhos bc59e3da51 ramips: move 'arch/mips/include/asm/mach-ralink/eth.h' to 'drivers/net/ramips_eth.h' 
SVN-Revision: 18176
 2009-10-26 17:17:51 +00:00
Gabor Juhos 5dd653a6bd ramips: use definitions from rt305x_regs, and nuke the duplicated ones 
SVN-Revision: 18175
 2009-10-26 17:17:48 +00:00
Gabor Juhos c170980c4f ramips: move ramips_eth_platform_data into a separate file 
SVN-Revision: 18174
 2009-10-26 17:17:45 +00:00
Gabor Juhos b98fa096a6 ramips: request_irq prior to dma allocation, and handle the case if it fails 
SVN-Revision: 18173
 2009-10-26 17:17:42 +00:00
Gabor Juhos 08f77d2e7e ramips: add error handling to ramips_alloc_dma 
SVN-Revision: 18172
 2009-10-26 17:17:39 +00:00
Gabor Juhos 941c1dae2c ramips: free allocated skbs in ramips_cleanup_dma 
SVN-Revision: 18171
 2009-10-26 17:17:37 +00:00
Gabor Juhos 82cc25d5f0 ramips: add ramips_setup_dma helper to the ethernet driver 
SVN-Revision: 18170
 2009-10-26 17:17:34 +00:00
Gabor Juhos f69b042df9 ramips: add ramips_cleanup_dma helper 
SVN-Revision: 18169
 2009-10-26 17:17:29 +00:00
Gabor Juhos defb7c0059 ramips: remove unnecessary includes in the ethernet driver 
SVN-Revision: 18168
 2009-10-26 17:17:26 +00:00
Gabor Juhos 36cb733d4f ramips: fix dma api usage in the ethernet driver 
SVN-Revision: 18167
 2009-10-26 17:17:22 +00:00
Gabor Juhos 69a3298ab5 ramips: use resource to pass irq and base address to the ethernet driver 
SVN-Revision: 18166
 2009-10-26 17:17:18 +00:00
Gabor Juhos 7c7f004875 ramips: add error-path handling to the ramips_eth_plat_probe 
SVN-Revision: 18165
 2009-10-26 17:17:13 +00:00
John Crispin f1ad6d3768 fixes licenses 
SVN-Revision: 18152
 2009-10-25 17:41:01 +00:00
John Crispin 6f63d7baf2 clean up dma api of ethernet driver 
SVN-Revision: 18150
 2009-10-25 16:58:00 +00:00
John Crispin 9126be5b6e fixes dma bug in eth driver, that was caused under high net load. the dma ring was not initialized on time 
SVN-Revision: 18149
 2009-10-25 14:34:55 +00:00
Gabor Juhos 984fe7992a ramips: nuke net_device stats from the private data of the ethernet driver 
SVN-Revision: 18147
 2009-10-25 09:37:30 +00:00
Gabor Juhos ec836476b0 ramips: remove unnecessary type-castings in the ethernet driver 
SVN-Revision: 18146
 2009-10-25 09:37:27 +00:00
Gabor Juhos ac92dc42d4 ramips: change debug message levels, and add missing LFs 
SVN-Revision: 18145
 2009-10-25 09:37:24 +00:00
Gabor Juhos 0fe967f6e6 ramips: make ethernet fuctions static 
SVN-Revision: 18144
 2009-10-25 09:37:21 +00:00
Gabor Juhos 7af7711f9f ramips: register ethernet device on the DIR-300 board 
SVN-Revision: 18143
 2009-10-25 09:37:17 +00:00
Gabor Juhos 2ad69183a8 ramips: change prom code to accept 'board=FOOBAR' from the command line 
SVN-Revision: 18142
 2009-10-25 07:10:16 +00:00
Gabor Juhos d681005ce3 ramips: modify {read,write}_config helpers 
SVN-Revision: 18141
 2009-10-25 07:10:14 +00:00
Gabor Juhos ebde2e4c90 ramips: nuke config_access helper 
SVN-Revision: 18140
 2009-10-25 07:10:11 +00:00
John Crispin c23f92244c fixes dma hangups in eth 
SVN-Revision: 18139
 2009-10-25 00:11:08 +00:00
John Crispin eff75d868b make ethernet a platform device 
SVN-Revision: 18135
 2009-10-24 20:58:41 +00:00
John Crispin 5c399c6f20 missing define to make mach for fonera20n work 
SVN-Revision: 18134
 2009-10-24 20:57:59 +00:00
John Crispin 81e5a2d14b make default llll/w vlan setup in esw 
SVN-Revision: 18133
 2009-10-24 20:56:31 +00:00
John Crispin e4e4aa90d3 adds mach type for fonera20n 
SVN-Revision: 18132
 2009-10-24 20:55:36 +00:00
John Crispin d95163658c adds ethernet driver, esw needs to be moved to swconfig, driver is missing rt288x support, not a platform device yet 
SVN-Revision: 18128
 2009-10-23 16:51:51 +00:00
Gabor Juhos 279c5dad25 ramips: add preliminary support for the DIR-300 revB board 
SVN-Revision: 18058
 2009-10-18 08:48:07 +00:00
Gabor Juhos 3b9cb8b673 ramips: fix return value in 'pcibios_map_irq' in the rt288x pci code 
SVN-Revision: 17975
 2009-10-07 11:37:12 +00:00
Gabor Juhos 13be9155c5 ramips: remove obsolete 'pcibios_fixups' from the rt288x pci code 
SVN-Revision: 17974
 2009-10-07 11:37:10 +00:00
Gabor Juhos f2470f7590 ramips: add rt2880_pci_get_cfgaddr helper 
SVN-Revision: 17973
 2009-10-07 11:37:07 +00:00
Gabor Juhos fe360a232b ramips: use switch statement instead of multiple if-else-if in the rt288x pci code 
SVN-Revision: 17972
 2009-10-07 11:37:03 +00:00
Gabor Juhos 37f5a64938 ramips: protect rt288x pci config accesses with a spinlock 
SVN-Revision: 17971
 2009-10-07 11:37:00 +00:00
Gabor Juhos 84e2f22465 ramips: make rt2880_pci_base static 
SVN-Revision: 17970
 2009-10-07 11:36:57 +00:00
Gabor Juhos ca82f13970 ramips: define some magic values in the rt288x pci code 
SVN-Revision: 17969
 2009-10-07 11:36:53 +00:00
Gabor Juhos 6a54d033fc ramips: add copyright header to the rt288x pci code 
SVN-Revision: 17968
 2009-10-07 11:36:49 +00:00
Gabor Juhos 7f3d685eec ramips: make {read,write}_config static 
SVN-Revision: 17920
 2009-10-05 18:44:24 +00:00
Gabor Juhos 2739177201 ramips: convert 'config_access' function to void 
SVN-Revision: 17919
 2009-10-05 18:44:22 +00:00
Gabor Juhos 5b07caf121 ramips: add register access functions into the rt288x pci code 
SVN-Revision: 17918
 2009-10-05 18:44:19 +00:00
Gabor Juhos 0f51ed2723 ramips: fix RT2880_PCI_BASE definition 
SVN-Revision: 17917
 2009-10-05 18:44:16 +00:00
Gabor Juhos 5a37945317 ramips: rt288x pci code cleanup 
SVN-Revision: 17916
 2009-10-05 18:44:13 +00:00
Gabor Juhos 0e0e945e33 ramips: cleanup coding-style of the rt288x pci code 
SVN-Revision: 17915
 2009-10-05 18:44:10 +00:00
Gabor Juhos 6ceea98b0a ramips: merge ops-rt288x.c and rt288x_pci.h into pci-rt288x.c 
SVN-Revision: 17914
 2009-10-05 18:44:06 +00:00
Gabor Juhos c8489ba3f8 ramips: remove unneccesary ifdefs from the rt288x pci code 
SVN-Revision: 17862
 2009-10-05 09:06:16 +00:00
Gabor Juhos e555522b95 ramips: remove unneccesary includes from the rt288x pci code 
SVN-Revision: 17861
 2009-10-05 09:06:13 +00:00
Gabor Juhos f992f34277 ramips: add Kbuild patch for the rt288x pci code, and fix invalid header file paths 
SVN-Revision: 17860
 2009-10-05 09:06:10 +00:00
John Crispin a70ef0c337 adds pci support for rt288x 
SVN-Revision: 17855
 2009-10-04 19:53:17 +00:00
Gabor Juhos 28250aaa31 add missing GPIO register offsets 
SVN-Revision: 17513
 2009-09-04 15:08:29 +00:00
Gabor Juhos 8d8a4e7274 add GPIO configuration feature 
SVN-Revision: 17512
 2009-09-04 15:08:26 +00:00
Gabor Juhos b5e6d76dea fix a typo 
SVN-Revision: 17474
 2009-09-02 15:31:03 +00:00
Gabor Juhos 09677bf748 initial support for the AP-R3052-V22RW-2X2 board 
SVN-Revision: 17473
 2009-09-02 15:31:00 +00:00
Gabor Juhos c4385d3282 use common code for early_serial setup 
SVN-Revision: 17467
 2009-09-02 12:44:17 +00:00
Gabor Juhos 73b20f8194 share prom code 
SVN-Revision: 17466
 2009-09-02 10:04:12 +00:00
Gabor Juhos 552e298755 initial support for Asus RT-N15 
SVN-Revision: 17463
 2009-09-01 19:34:27 +00:00
Gabor Juhos 01657335b9 cache_line_size is 16 on rt288x 
SVN-Revision: 17462
 2009-09-01 19:34:24 +00:00
Gabor Juhos 2dbe6d0e6f remove unused *_MACH_GENERIC config options 
SVN-Revision: 17461
 2009-09-01 19:34:21 +00:00
Gabor Juhos 298202afb8 share machine registration code 
SVN-Revision: 17456
 2009-08-31 18:53:34 +00:00
Gabor Juhos aec7426483 use common get_system_type function 
SVN-Revision: 17455
 2009-08-31 18:53:31 +00:00
Gabor Juhos f4afb9a4f9 share memory size detection code 
SVN-Revision: 17454
 2009-08-31 18:53:26 +00:00
Gabor Juhos 3cc0bc9038 add common setup code 
SVN-Revision: 17453
 2009-08-31 18:53:22 +00:00
Gabor Juhos 4dd57199a2 rt288x: readd RT2880_INTC_BASE definition 
SVN-Revision: 17452
 2009-08-31 15:35:54 +00:00
Gabor Juhos f62337417c rt288x: fix serial console 
SVN-Revision: 17450
 2009-08-31 09:34:07 +00:00
Gabor Juhos ff92681121 register GPIO LEDs on the WHR-G300N board 
SVN-Revision: 17449
 2009-08-31 09:14:18 +00:00
Gabor Juhos 19a462c9e3 add common GPIO LED support 
SVN-Revision: 17448
 2009-08-31 09:14:14 +00:00
Gabor Juhos 73ef265227 fix GPIOLIB support 
SVN-Revision: 17446
 2009-08-31 08:29:19 +00:00
Gabor Juhos 15b832c0b7 rt288x: fix build error 
SVN-Revision: 17444
 2009-08-30 20:13:13 +00:00
Gabor Juhos 9eaea39ae5 platform.h is rt288x specific, move it 
SVN-Revision: 17443
 2009-08-30 20:13:10 +00:00
Gabor Juhos 8049111b19 rt288x: generic machine code cleanup 
SVN-Revision: 17442
 2009-08-30 19:55:55 +00:00
Gabor Juhos d034b4246e header cleanup 
SVN-Revision: 17441
 2009-08-30 19:55:53 +00:00
Gabor Juhos 6b482c872b share common INTC code 
SVN-Revision: 17440
 2009-08-30 19:15:58 +00:00
Gabor Juhos 051c44e0c5 initial support for RT288x/RT305x 
SVN-Revision: 17439
 2009-08-30 19:15:51 +00:00