07933a6644
mac80211: fix typo that broke specifying the phy name directly (deprecated)
...
SVN-Revision: 33853
2012-10-18 11:42:42 +00:00
e36eb8579f
mac80211: store the device path as identifier in the config instead of the mac address, makes it more robust against card replacement or user errors
...
SVN-Revision: 33834
2012-10-18 00:09:55 +00:00
a31bdfbea0
mac80211: add uci support for configuring antenna gain
...
SVN-Revision: 33587
2012-09-28 18:29:22 +00:00
7639c9b580
mac80211/hostapd: add support for HT capa in case of IBSS/RSN
...
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
SVN-Revision: 32830
2012-07-24 23:07:25 +00:00
8b3882224a
wpa_supplicant: add more parameters
...
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
SVN-Revision: 32829
2012-07-24 23:07:15 +00:00
62d9f257a1
mac80211: make channel bandwidth setting generic
...
SVN-Revision: 32596
2012-07-04 00:25:46 +00:00
7c1c457855
mac80211: get rid of duplicate iw reg set command (thx, stintel)
...
SVN-Revision: 31859
2012-05-26 14:56:04 +00:00
e83f30306c
mac80211: allow NOHT for IBSS mode
...
SVN-Revision: 31137
2012-03-29 12:24:43 +00:00
877c407ade
mac80211: add hostapd socket option to wpa_supplicant for IBSS RSN as well
...
SVN-Revision: 31088
2012-03-27 13:52:39 +00:00
2143633bd2
mac80211: modify mac80211.sh to in order to support IBSS-RSN
...
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
SVN-Revision: 31083
2012-03-27 13:21:46 +00:00
a0cd381e79
mac80211: Allow preamble configuration
...
Add a new wireless config parameter short_preamble=0|1 to enable
usage of short preambles. Default is to only allow long preambles
as before.
Even if short_preamble is set to 1 hostapd will take care that
short preambles are disabled as soon as a STA associates that
cannot handle short preambles.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 30539
2012-02-14 19:07:15 +00:00
e7c63048df
mac80211: clean up init, remove some redundant checks, fix tx power init ( #10113 )
...
SVN-Revision: 29606
2011-12-23 19:24:38 +00:00
b62f4e0aa2
mac80211: fix powersave setting
...
SVN-Revision: 29569
2011-12-19 10:27:28 +00:00
fe8a3a36f0
mac80211: apply txpower after bringing up the interface, should fix #10113
...
SVN-Revision: 29566
2011-12-18 22:19:21 +00:00
25540787ad
mac80211: use iw instead of iwconfig to disable powersave
...
SVN-Revision: 29565
2011-12-18 22:18:46 +00:00
d7205a9021
mac80211: change wireless ifname numbering schema Instead of simply counting up until we hit a free iface, group ifnames by wiphy so that the first wlanX on a phy gets the phy number and following ifaces an index-suffix, e.g. wlan0 for network 1 on phy 1 and wlan0-1 for network 2 on phy 1. This fixes state var confusion when operating multiple radios and allows to reliably take down and restart one radio only, even if the number of networks changes in between. This should, along with other changes in LuCI, fix #10335 .
...
SVN-Revision: 28784
2011-11-06 18:49:17 +00:00
2e94be02a8
mac80211: set the country code early to allow crda to settle
...
SVN-Revision: 28387
2011-10-08 17:34:56 +00:00
6addd50b9d
mac80211: rework mac address generation for virtual interfaces; set locally administered bit on generated macs and change the last two bytes isntead of the first one
...
SVN-Revision: 28298
2011-09-25 14:14:37 +00:00
fdfa6fdbcd
mac80211: introduce "disabled" option for wifi-iface section to shutdown single networks on a radio
...
SVN-Revision: 28198
2011-09-08 23:21:36 +00:00
9d33a50cbb
mac80211: configure hostapd logging options
...
SVN-Revision: 28057
2011-08-20 00:14:48 +00:00
3aa922d33c
mac80211: use first available channel from current phy if channel is set to "auto"
...
SVN-Revision: 27976
2011-08-13 22:55:59 +00:00
b4cef327ff
ath9k: add a temporary uci option for setting the channel bandwidth
...
SVN-Revision: 27563
2011-07-08 17:19:42 +00:00
e087e678af
mac80211: configure HT IBSS through uci
...
SVN-Revision: 27279
2011-06-24 19:53:31 +00:00
be3deb5b14
mac80211: broadcast the country IE by default if the country code is configured ( #9308 )
...
SVN-Revision: 26765
2011-04-26 19:33:27 +00:00
f55fe56225
mac80211: Fix unique device autodetection
...
SVN-Revision: 26165
2011-03-15 00:44:02 +00:00
3494bdc59a
mac80211: allow AP configuration of beacon interval, DTIM period, maximum permissible STA listen interval, and basic rates
...
This introduces beacon_int and basic_rate (per wifi-device), and
dtim_period and max_listen_int (per wifi-iface) for mac80211. These
configure the beacon interval, basic rate specification, DTIM period
(one DTIM per this many beacon frames), and maximum listen interval
that a STA will be permitted to associate with. All of the new
settings are optional; if they're absent, the existing hostapd (or, in
the case of basic_rate, driver) defaults will be used.
The existing bintval property only used for type adhoc is moved from
wifi-iface to wifi-device, and is renamed to beacon_interval because
bintval isn't a great name. The beacon interval is property of the
wifi-device; while the choice between wifi-device and wifi-iface may
not be relevant with an adhoc network, there's no reason to configure
the same property one way for type adhoc and another for type ap. This
change isn't expected to cause many problems, as bintval was added
recently, in r25111.
Similarly, the list of basic rates, also added for type adhoc in
r25111, is a property of the device and not the interface. Further, it
ought to be represented in UCI as a list, not a string dependent on
the format that iw uses. I’ve moved it onto the device, renamed it to
basic_rate, and made it configurable for APs via hostapd. Finally, I
adapted it to use the same kb/s representation as mcast_rate; there's
precedent for this format in that it's also how madwifi interprets
mcast_rate.
Neither bintval nor basicrates were ever documented in the UCI
wireless configuration page on the wiki. When this change is
committed, I'll update the documentation as needed.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 25837
2011-03-02 21:08:28 +00:00
718645d581
mac80211: ignore errors in the command to set the rx/tx antenna - many drivers do not support this yet
...
SVN-Revision: 25192
2011-01-28 12:01:54 +00:00
a580764a9f
mac80211: fix order of iw parameters, fix broken antenna config call
...
SVN-Revision: 25152
2011-01-27 16:00:02 +00:00
e6a9e6875a
mac80211: Fix antenna setting when only one of {rx,tx}antenna options is specified
...
SVN-Revision: 25136
2011-01-27 09:13:51 +00:00
3b0c90325e
mac80211: add missing done to mac80211.sh ( #8735 )
...
SVN-Revision: 25131
2011-01-26 21:01:23 +00:00
49d060dc1b
mac80211: add mising esac to mac80211.sh
...
SVN-Revision: 25122
2011-01-26 20:37:12 +00:00
4e369e5378
mac80211: rework recent mac80211.sh additions: - split antenna options into rxantenna and txantenna to bring it in line with broadcom and madwifi - get rid of temporary variables - follow the documented config protocol for wep keys (option key # + option key# [s:]data)
...
SVN-Revision: 25116
2011-01-26 18:01:26 +00:00
0cd2b87f95
mac80211: Add new parameters to mac80211.sh
...
Add new options 'bintval' (beacon interval), 'basicrates' (basic rates) and
'antenna' (antenna selection) for /etc/config/wireless to be used with
mac80211 drivers.
Enable WEP encryption for IBSS mode.
Patch from: kentarou matsuyama <matsuyama@thinktube.com>
SVN-Revision: 25111
2011-01-26 11:34:15 +00:00
cfdfc8c05b
mac80211: Add mac address filter configuration for hostapd
...
Add support of mac address filter. Now 'macfilter' and 'maclist' options
can be used with mac80211.
Patch from: kentarou matsuyama <matsuyama@thinktube.com>
SVN-Revision: 25105
2011-01-26 11:33:54 +00:00
253f4d82f2
mac80211: support per-vif wmm option, defaults to 1 if unset
...
SVN-Revision: 24966
2011-01-11 13:19:53 +00:00
7526fd8627
mac80211: rename max_clients option to maxassoc, this brings it in line with broadcom
...
SVN-Revision: 24726
2010-12-19 13:33:55 +00:00
3347f8e360
hostapd: add support for specifying the maximum number of clients
...
Signed-off-by: Alexander Couzens <lynxis@c-base.org>
SVN-Revision: 24725
2010-12-19 11:56:56 +00:00
4dcba42342
mac80211: use iw for txpower control ( #8416 )
...
SVN-Revision: 24441
2010-12-10 18:43:47 +00:00
3e7589ce1a
mac80211: set GF flag in hostapd config if supported
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 23673
2010-10-27 15:04:29 +00:00
c173d41012
mac80211: add uci support for the ad-hoc multicast rate setting
...
SVN-Revision: 23637
2010-10-25 23:51:12 +00:00
35cdc5d722
hostapd/mac80211: implement support for AP+STA
...
SVN-Revision: 23602
2010-10-23 23:39:54 +00:00
b7204be37b
wifi: change the default channel from 5 to 11, 5 was a really bad choice
...
SVN-Revision: 23423
2010-10-13 12:22:48 +00:00
8344c770fc
mac80211: fix handling of frag and rts options, thanks stintel!
...
SVN-Revision: 22355
2010-07-22 16:01:17 +00:00
e0751eb57e
mac80211: fix interface teardown for kernels >= 2.6.33
...
SVN-Revision: 22078
2010-07-06 18:53:48 +00:00
99757d3336
mac80211: use the nl80211 driver for wpa_supplicant
...
SVN-Revision: 21321
2010-05-02 22:03:54 +00:00
ef710f7cf3
mac80211: enable rx/tx stbc by default if supported
...
SVN-Revision: 21319
2010-05-02 22:03:44 +00:00
8b9afa6f75
mac80211: fix interface setup for wds client sometimes an interface does not get added to the bridge properly this seems to be a race of interface setup vs wpa_supplicant fix this by configuring the interface only after wpa_supplicant has been started
...
SVN-Revision: 20106
2010-03-09 21:23:14 +00:00
ddb6eb9d51
mac80211: add support for the noscan option for skipping the initial scan on hostapd startup
...
SVN-Revision: 20089
2010-03-09 17:36:04 +00:00
ee2c54569f
mac80211: fix essid setting for ad-hoc (thx, stintel)
...
SVN-Revision: 19916
2010-02-28 19:05:32 +00:00
13cfa88855
mac80211: fix client mode
...
SVN-Revision: 19915
2010-02-28 19:02:05 +00:00
Felix Fietkau
John Crispin
Travis Kemen
Jo-Philipp Wich
Vasilis Tsiligiannis