c9394a7b9e
trace-cmd: update to v2.4
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43280
2014-11-16 11:39:14 +00:00
dd5959c114
mac80211: fix VHT rate selection
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43279
2014-11-16 11:39:07 +00:00
25d508dcd9
mac80211: backport list_last_entry
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43278
2014-11-16 11:39:01 +00:00
6abb5f7a21
mac80211: backport devm_kmemdup
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43277
2014-11-16 11:38:55 +00:00
c073bf6bdf
ralink: few updates tot he sdhci probe code
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43275
2014-11-15 14:35:32 +00:00
ce1c580efb
ralink: make the sdhci module build again
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43274
2014-11-14 18:51:41 +00:00
76a54a424c
ar8216: fix "unused variable" compiler warning
...
Most likely a copy & paste error when deriving ar8327_sw_set_ports
from ar8xxx_sw_set_ports.
Remove unused variable.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 43273
2014-11-14 17:06:09 +00:00
44d703160b
lantiq: Concatenate multiple flash chips for lantiq-flash
...
Signed-off-by: Maikel Bloemendal <openwrt@maikelenyvonne.nl>
Tested-by: Eddi De Pieri <eddi@depieri.net>
SVN-Revision: 43272
2014-11-14 17:06:04 +00:00
6fafcba63b
ar71xx: Fix the sys LEDs on the EasyLink M150 and mini
...
Sets the system LED on the EasyLink M150 and mini to lower-case "easylink"
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 43271
2014-11-14 16:58:29 +00:00
b6f5713b3f
ar71xx: adjust MR900 profile for the OpenMesh MR900v2 board
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 43270
2014-11-14 16:55:32 +00:00
7dce745a99
package/uboot-envtools: add OpenMesh MR900v2 support
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 43269
2014-11-14 16:55:26 +00:00
29c7b1860c
package/om-watchdog: add OpenMesh MR900v2 support
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 43268
2014-11-14 16:55:19 +00:00
52c267e2f7
ar71xx: add sysupgrade support for OpenMesh MR900v2
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 43267
2014-11-14 16:55:14 +00:00
104be9f803
ar71xx: add user-space support for OpenMesh MR900v2
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 43266
2014-11-14 16:55:04 +00:00
bc333d5399
ar71xx: add kernel support for the OpenMesh MR900v2
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 43265
2014-11-14 16:54:58 +00:00
305c1431e3
ar71xx: create profile and build image for the OpenMesh MR900 board
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 43264
2014-11-14 16:54:50 +00:00
c126266f43
package/uboot-envtools: add OpenMesh MR900 support
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 43263
2014-11-14 16:54:45 +00:00
c1f2ef8db4
package/om-watchdog: add OpenMesh MR900 support
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 43262
2014-11-14 16:54:38 +00:00
548822cd7a
ar71xx: enable sysupgrade for the OpenMesh MR900
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 43261
2014-11-14 16:54:28 +00:00
9b1bc2d671
scripts/om-fwupgradecfg-gen.sh: add support for the MR900
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 43260
2014-11-14 16:54:23 +00:00
cfdaa8aefd
ar71xx: add user-space support for the OpenMesh MR900 board
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 43259
2014-11-14 16:54:15 +00:00
95544f33dd
ar71xx: add kernel support for the OpenMesh MR900 board
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 43258
2014-11-14 16:54:07 +00:00
79475ee880
procd: update to latest git HEAD
...
make sure /sys/fs/cgroup is mounted on boot
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43257
2014-11-14 16:53:58 +00:00
4b5c23e1e3
lantiq: vgv7519 - set some defaults for leds
...
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
SVN-Revision: 43256
2014-11-14 16:53:53 +00:00
901dddce31
lantiq: set default led configuration from /sys entry later, after per board settings
...
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
SVN-Revision: 43255
2014-11-14 16:53:48 +00:00
7cc72e4b93
ralink: dont define pm_poweroff
...
this makes gpio-poweroff work
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43254
2014-11-14 16:53:40 +00:00
be23eaa8c3
ralink: fix bank detection in mt7621 gpio driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43253
2014-11-14 16:53:34 +00:00
6d4282086d
ralink: enable the proper drivers in the mt7621 config
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43252
2014-11-14 16:53:29 +00:00
0767ee848a
ralink: fix broken pinmux function naming inside mt7621.c
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43251
2014-11-14 16:53:21 +00:00
8cde8a05c9
ralink: update sdhci driver
...
the new driver handles newer SoCs
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43250
2014-11-14 16:53:15 +00:00
66463a5b5d
ralink: update pcie driver to load ranges from dts
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43249
2014-11-14 16:53:07 +00:00
7963782b86
ralink: add a new global ralink_soc variable
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43248
2014-11-14 16:53:01 +00:00
caa29dea2c
ralink: update ethernet driver to use new ralink_soc variable
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43247
2014-11-14 16:52:52 +00:00
bf8bb5b611
ralink: fix the 10mbit bug on mt7621
...
a missing "val =" caused the AN bit in the phy0 reg to be flushed.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43246
2014-11-14 16:52:47 +00:00
194ca6127e
ralink: improve mt7530 support
...
the SDK does a bit of extra init that we did not do yet when using an external mt7530.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43245
2014-11-14 16:52:42 +00:00
0371dabc13
ralink: add support for WSR-600/1166
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43244
2014-11-14 16:52:36 +00:00
062828aee0
ralink: mt7621 has a different base addr for PVID
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43243
2014-11-14 16:52:30 +00:00
938e1e03fb
ralink: drop some unused code from pci-mt7620a
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43242
2014-11-14 16:52:25 +00:00
9ee442d0f9
pppd: add option to set custom host-uniq pppoe tag
...
SVN-Revision: 43241
2014-11-14 16:39:59 +00:00
5a05cb40ce
ath9k: fix crashes when using shared IRQs
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43239
2014-11-13 17:38:22 +00:00
bfcdc8711c
ralink: fix up dts for mt7621 eval board
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43238
2014-11-12 14:55:00 +00:00
86e3315ece
ralink: add support for mt7621 ethernet
...
somehow all switch ports still come up as 10mbit.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43237
2014-11-12 14:54:50 +00:00
45814d150a
ralink: more mt7530 fixes
...
make 1166 wan port work. this broke due to the esw_polling bug
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43236
2014-11-11 11:46:16 +00:00
e399931376
ralink: fix mdio polling of external phys if only 1 phy exists
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43235
2014-11-11 11:46:09 +00:00
6623feb572
ralink: remove IC plus phy driver
...
this driver confuses some boards
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43234
2014-11-11 11:46:02 +00:00
6966aa0d50
lldpd: allow discovery protocols to be disabled from menuconfig
...
Signed-off-by: Michel Stam <m.stam@fugro.nl>
[jow: fixed condition for CONFIG_LLDPD_WITH_JSON]
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43233
2014-11-11 09:49:20 +00:00
da53ac677f
ralink: DCS-930: enable sound
...
Camera has microphone; in order to use it by default enable sound support.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43232
2014-11-11 00:08:05 +00:00
494c6e7f6e
ralink: update DCS-930 dts
...
* read MAC address from factory partition
* remove port defines since there is only one port (most likely C/P error)
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43231
2014-11-11 00:05:14 +00:00
4f1a9470f0
kirkwood: add support for Linksys EA3500
...
http://wiki.openwrt.org/toh/linksys/ea3500
Signed-off-by: Dan Walters <dan@walters.io>
SVN-Revision: 43230
2014-11-10 23:55:10 +00:00
a69ebe234d
kernel: update kernel 3.18 to rc4
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43229
2014-11-10 22:51:30 +00:00
Felix Fietkau
John Crispin
Matteo Croce
Jo-Philipp Wich
Luka Perkov
Hauke Mehrtens