hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
23,131 Commits
5 Branches
29 Tags
202 MiB
Commit Graph

9739 Commits (c130a3feac577eb07943d2c3e5428ea5557aabcc)

Author SHA1 Message Date
Gabor Juhos c130a3feac generic: mvswitch: add detach callback 
Use the detach callback to disable packet mangling
to avoid possible NULL pointer dereference.

Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35512
 2013-02-07 15:18:34 +00:00
Gabor Juhos 4be8c22e74 generic: ar8216: add detach callback 
The current code uses the 'remove' callback to disable
packet mangle on the underlying ethernet device.
However the attached_dev is always NULL when the
'remove' callback is called by phylib, and this causes
NULL pointer dereference, like this:

  [  475.300000] CPU 0 Unable to handle kernel paging request at virtual address 000000f0, epc == 801cdcf0, ra == 801c7eac
  [  475.310000] Oops[#1]:
  [  475.310000] Cpu 0
  [  475.310000] $ 0   : 00000000 00000000 00000000 00000001
  [  475.310000] $ 4   : 828dde00 00000005 828dde08 ffffffff
  [  475.310000] $ 8   : 00380081 00380081 82902a40 00000001
  [  475.310000] $12   : 00000037 00370081 00000001 00000000
  [  475.310000] $16   : 82865000 828dde08 828dde00 00000001
  [  475.310000] $20   : 00000080 00460000 00000002 77151448
  [  475.310000] $24   : 00000000 801abfd4
  [  475.310000] $28   : 82cc2000 82cc3d58 0053c3c4 801c7eac
  [  475.310000] Hi    : 00000007
  [  475.310000] Lo    : 00000004
  [  475.310000] epc   : 801cdcf0 ar8216_remove+0x1c/0x94
  [  475.310000]     Tainted: G           O
  [  475.310000] ra    : 801c7eac phy_remove+0x4c/0x6c
  [  475.310000] Status: 1000cc03    KERNEL EXL IE
  [  475.310000] Cause : 00800008
  [  475.310000] BadVA : 000000f0
  [  475.310000] PrId  : 00019750 (MIPS 74Kc)
  [  475.310000] Modules linked in: ath79_wdt ledtrig_usbdev ledtrig_netdev ag71xx(-) nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ft
  p ipt_MASQUERADE iptable_nat xt_nat nf_nat_ipv4 nf_nat pppoext_conntrack xt_CT iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_co
  nntrack ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpu
  dp x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80
  211(O) compat(O) arc4 crypto_blkcipher aead ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O)
  [  475.310000] Process rmmod (pid: 1160, threadinfo=82cc2000, task=83969920, tls=7747c440)
  [  475.310000] Stack : 828dde08 802f5004 802f4680 00000001 828ddf70 801c7eac 802f4680 801ad6d8
          82902940 00000000 828dde08 802f5004 802f4680 801ad770 00000002 80269d94
          00000000 00000001 00000080 828dde08 828dde3c 801ad7fc 82902940 00000000
          83859100 00000000 8384dd2c 8384dd2c 828dde08 801ad230 82902800 00000000
          00000000 001a0041 828dde08 828dde08 802e80e8 801aac44 00000080 00460000
          ...
  [  475.310000] Call Trace:
  [  475.310000] [<801cdcf0>] ar8216_remove+0x1c/0x94
  [  475.310000] [<801c7eac>] phy_remove+0x4c/0x6c
  [  475.310000] [<801ad770>] __device_release_driver+0x6c/0xd0
  [  475.310000] [<801ad7fc>] device_release_driver+0x28/0x40
  [  475.310000] [<801ad230>] bus_remove_device+0xd8/0x10c
  [  475.310000] [<801aac44>] device_del+0x110/0x170
  [  475.310000] [<801aacb8>] device_unregister+0x14/0x28
  [  475.310000] [<801c92b0>] mdiobus_unregister+0x4c/0x70
  [  475.310000] [<82913060>] ag71xx_remove_ar8216_header+0xdc/0x5a8 [ag71xx]
  [  475.310000]
  [  475.310000]
  Code: 1200001c  8c82017c  ac800128 <8c4500f0> 3c03ffdf  3463ffff 00a31824  ac4300f0  ac4000e0

Add a detach callback and disable packet mangling in
that to fix the problem.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35511
 2013-02-07 15:18:32 +00:00
Gabor Juhos fe61fc2d7d generic: add detach callback to struct phy_driver 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35510
 2013-02-07 15:18:24 +00:00
Hauke Mehrtens 07db9e8eab brcm47xx: fix name of kmod-ocf-ubsec-ssb 
This also removes kmod-ocf, because kmod-crypto-ocf is automatically selected by kmod-ocf-ubsec-ssb.

Thank you Manuel Munz <freifunk@somakoma.de> for the patch.

SVN-Revision: 35509
 2013-02-06 22:51:25 +00:00
Hauke Mehrtens a52832164b brcm47xx: bgmac: make it possible to set the devices into promisc mode when it is already up 
This fixes #12927.

SVN-Revision: 35507
 2013-02-06 14:57:00 +00:00
Florian Fainelli 6b0da6db6a remove support for 3.6 kernel 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35506
 2013-02-05 22:36:54 +00:00
Florian Fainelli e22926a46b make default version 3.7.6 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35505
 2013-02-05 22:36:50 +00:00
Florian Fainelli 57803a98ec remove superfluous calls to /lib/brcm63xx.sh 
The first preinit script 03_do_brcm63xx.sh does the right job of
exporting variables for the other subsequent preinit scripts to use
them.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35504
 2013-02-05 22:25:30 +00:00
Florian Fainelli 84d306d23c remove references to the old switch driver 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35503
 2013-02-05 22:25:19 +00:00
Mirko Vogt ec19a23bae fix trx checksum after first boot and add led/button definitions for boards RTA770BW and RTA770W 
SVN-Revision: 35501
 2013-02-05 14:57:43 +00:00
Mirko Vogt f460388ce2 add support for board named RTA770W 
Actually this board is the very same as the rta770bw,
where the additional 'b' within the name just
indicates 'Annex B'. The ADSL Modem itself is able
to handle both, Annex A as well as Annex B -
the loaded firmware makes the only difference

SVN-Revision: 35500
 2013-02-05 14:57:40 +00:00
Gabor Juhos 395d0bdc1f generic: ar8216: clear driver specific data pointer in phy_device 
This is needed to avoid a NULL pointer dereference:

  [   19.525270] Unable to handle kernel paging request for data at address 0x00000018
  [   19.532750] Faulting instruction address: 0xc016e104
  [   19.537714] Oops: Kernel access of bad area, sig: 11 [#1]
  [   19.543102] P1010 RDB
  [   19.545365] Modules linked in: booke_wdt nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp ipt_MASQUERADE iptable_nat xt_nat d
  [   19.590725] NIP: c016e104 LR: c0171490 CTR: 00000000
  [   19.595681] REGS: c4bc3c10 TRAP: 0300   Tainted: G        W  O (3.7.6)
  [   19.602284] MSR: 00029000 <CE,EE,ME>  CR: 82002022  XER: 20000000
  [   19.608381] DEAR: 00000018, ESR: 00000000
  [   19.612382] TASK = c4cd9c80[2070] 'ifconfig' THREAD: c4bc2000
  GPR00: 00000001 c4bc3cc0 c4cd9c80 00000000 c7811000 00000000 00000000 0000e8ec
  GPR08: 0000e8eb 00000000 00029000 00000001 00000000 100801f8 1005c51c 1005c514
  GPR16: 1005c468 1005c54c 1005c258 1005c530 10060000 00000000 c7811000 ffff8914
  GPR24: c7815030 c793e400 10063adb 00000000 c7811000 c045594c c78ca600 c7815000
  [   19.646352] NIP [c016e104] register_switch+0x98/0x2d0
  [   19.651397] LR [c0171490] ar8216_config_init+0x2d8/0x3f4
  [   19.656697] Call Trace:
  [   19.659138] [c4bc3cc0] [c0170490] ar8216_mii_read+0x64/0xc4 (unreliable)
  [   19.665835] [c4bc3d00] [c0171490] ar8216_config_init+0x2d8/0x3f4
  [   19.671835] [c4bc3d20] [c016cf8c] phy_init_hw+0x50/0x6c
  [   19.677053] [c4bc3d30] [c016d078] phy_attach_direct+0xd0/0xf8
  [   19.682793] [c4bc3d50] [c016d154] phy_connect_direct+0x24/0x68
  [   19.688621] [c4bc3d70] [c0183b70] of_phy_connect+0x48/0x6c
  [   19.694102] [c4bc3d90] [c0175aac] gfar_enet_open+0x254/0x3d8
  [   19.699755] [c4bc3db0] [c019acc4] __dev_open+0xc0/0x120
  [   19.704975] [c4bc3dd0] [c019af98] __dev_change_flags+0xd4/0x15c
  [   19.710888] [c4bc3df0] [c019b0d4] dev_change_flags+0x1c/0x60
  [   19.716544] [c4bc3e10] [c01ebb94] devinet_ioctl+0x290/0x690
  [   19.722111] [c4bc3e70] [c01ec8d4] inet_ioctl+0x88/0xbc
  [   19.727245] [c4bc3e80] [c0186b98] sock_ioctl+0x258/0x294
  [   19.732551] [c4bc3ea0] [c009c00c] do_vfs_ioctl+0x6a4/0x728
  [   19.738031] [c4bc3f10] [c009c0d4] sys_ioctl+0x44/0x70
  [   19.743077] [c4bc3f40] [c000c74c] ret_from_syscall+0x0/0x3c
  [   19.748646] --- Exception: c01 at 0x48091b34
  [   19.748646]     LR = 0x480e4b64
  [   19.756033] Instruction dump:
  [   19.758991] 2f830000 907f0050 3860fff4 419e021c 837f0000 38000000 901f0038 901f0040
  [   19.766744] 901f003c 7f600034 5400d97e 0f000000 <801b0018> 2f800000 40be0010 801b001c

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35497
 2013-02-05 08:39:26 +00:00
Gabor Juhos 2e7f38c243 generic: ar8216: unregister switch on error path 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35496
 2013-02-05 08:39:24 +00:00
Gabor Juhos 1bb8ad6050 mpc85xx: enable GPIO sysfs interface 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35495
 2013-02-05 07:48:02 +00:00
Gabor Juhos 6ba265a573 mpc85xx: enable Freescale eSPI driver and m25p80 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35494
 2013-02-05 07:48:01 +00:00
Gabor Juhos eea43ffd33 mpc85xx: sync kernel config 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35493
 2013-02-05 07:47:59 +00:00
Hauke Mehrtens 8ba8225686 brcm47xx: fix detection of Asus RT-N16 
This fixes #12936.

SVN-Revision: 35492
 2013-02-04 22:49:05 +00:00
Hauke Mehrtens a1e3c0ca46 Add Failsafe support for Linksys E3000V1 / WRT610NV2 
Adds specification of the correct cpu_port for Linksys E3000V1 and WRT610NV2
in /lib/preinit/05_init_interfaces_brcm.  The list of devices will need to
be expanded.  Is there a way to determine the correct cpu_port to use in a
generic sense; for instance, if "/proc/switch/eth0/port/8" exists, or if
"/sys/class/net/eth0/device/driver/module/drivers/bcma:bgmac" exists?  Could
a similar method be used in "/etc/init.d/netconfig"?

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 35491
 2013-02-04 22:40:57 +00:00
Hauke Mehrtens c2198aba32 brcm47xx: Fix switch config on 4716/53115 devices 
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>

SVN-Revision: 35490
 2013-02-04 22:38:37 +00:00
Gabor Juhos b97aee1ee8 coldfire: R.I.P. 
The target still uses 2.6.38. The support of that
kernel version has been removed ~9 months ago.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35489
 2013-02-04 15:23:10 +00:00
Gabor Juhos c41002971a leon: R.I.P. 
It is broken since ~9 months and nobody takes care of that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35488
 2013-02-04 15:23:08 +00:00
Gabor Juhos 539e0b5b84 imx21: R.I.P. 
It is broken since ~22 months and nobody takes care of that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35487
 2013-02-04 15:23:07 +00:00
Gabor Juhos e7dee4ea87 octeon: R.I.P. 
It is broken since ~8 months and nobody takes care of that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35486
 2013-02-04 15:23:05 +00:00
Gabor Juhos da44b916cf omap35xx: R.I.P. 
It is broken since ~22 months and nobody takes care of that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35485
 2013-02-04 15:23:04 +00:00
Jonas Gorski 8506964e6d bcm63xx: add support for linux 3.8 
Based on 3.8-rc6

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35482
 2013-02-04 10:19:55 +00:00
Jonas Gorski 3b4fced67d bcm63xx: add support for linux 3.7 
Based on 3.7.6.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35481
 2013-02-04 10:19:50 +00:00
Jonas Gorski 0e9365b346 kernel: generic: update the ehci overcurrent patch to upstream submission 
Adds support for setting this in the generic platform driver's platform_data.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35480
 2013-02-04 10:19:37 +00:00
Jonas Gorski e0fe5596f8 kernel: generic: add back the patch exporting bcm63xx tag header 
It went missing when adding linux 3.7 support.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35479
 2013-02-04 10:19:35 +00:00
Jonas Gorski 34ad8f4e75 kernel: generic: update to 3.8-rc6 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35478
 2013-02-04 10:19:28 +00:00
Jonas Gorski a15e1a950d bcm63xx: refresh 3.6 patches 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35477
 2013-02-04 10:19:24 +00:00
Gabor Juhos 08ff976720 kernel: update linux 3.7 to 3.7.6 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35476
 2013-02-04 10:02:56 +00:00
Gabor Juhos b1168e70d3 ar71xx: use backported PCI_MEM_SIZE patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35470
 2013-02-02 18:17:58 +00:00
Gabor Juhos b9b341f05a ar71xx: rename ar933x_uart patch 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35469
 2013-02-02 18:17:53 +00:00
Gabor Juhos 9ed81a91f3 ramips: build image for the Omnima EMB HPM board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35468
 2013-02-02 17:21:06 +00:00
Gabor Juhos 813aec6796 ramips: add user-space support for the Omnima EMB HPM board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35467
 2013-02-02 17:21:05 +00:00
Gabor Juhos d578f3ac38 ramips: rt3883: add kernel support for the Omnima EMB HPM board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35466
 2013-02-02 17:21:01 +00:00
Gabor Juhos b99b2ff553 ramips: add userspace support for the Edimax BR-6425 
[juhosg: remove sysupgrade changes]

Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35463
 2013-02-02 17:01:50 +00:00
Gabor Juhos 0a42e38bad ramips: add kernel support for the Edimax BR-6425 board 
Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35462
 2013-02-02 17:01:47 +00:00
Gabor Juhos 4ac6eb480b x86/kvm_guest: add support for 3.7 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35460
 2013-02-02 15:31:57 +00:00
Gabor Juhos c340ef2ae2 x86: add missing symbols for 3.7 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35459
 2013-02-02 15:31:55 +00:00
Gabor Juhos 0f46f47512 x86/kvm_guest: add missing symbols for 3.3 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35458
 2013-02-02 15:31:54 +00:00
Gabor Juhos ab3e3cacaa alix2: convert from kernel version 3.3.8 to 3.7.5 
[juhosg: use 3.7.5 instead of 3.7.3]

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35457
 2013-02-02 15:31:52 +00:00
Gabor Juhos 4c223d7d4f generic: convert crypto-ocf from kernel_thread to kthread 
recent kernels have finally stopped exporting kernel_thread, since a
deprecation circa 2006.  This patch attempts to convert to the newer
kernel kthread API, particularly in random.c

[juhosg: remove randomproc variable, it is not required after the patch]

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35456
 2013-02-02 15:31:44 +00:00
Gabor Juhos 7c87d28054 ar71xx: fixes whitespaces for dir-825-c1 
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35455
 2013-02-02 15:02:19 +00:00
Gabor Juhos ecf55822bb mpc85xx: nuke 3.6 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35453
 2013-02-02 10:05:43 +00:00
Gabor Juhos 242859abae mpc85xx: switch to 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35452
 2013-02-02 10:05:40 +00:00
Gabor Juhos cde71c305c mpc85xx: add support for linux 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35451
 2013-02-02 10:05:37 +00:00
Gabor Juhos bbfd8cbf94 linux/3.7: add missing config symbols 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35450
 2013-02-02 10:05:08 +00:00
Gabor Juhos 9a438b2271 ar71xx: build images for the TP-LINK TL-WR743ND v2 
AR9331 based, these same as 741v4

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35449
 2013-02-02 10:01:15 +00:00
Gabor Juhos 668e529220 generic: fix gc_sections patch 
Due to the patch, essential '.data..*' sections are merged
into the '.data' section:

  --- vmlinux.good.sect   2013-02-01 23:49:16.000000000 +0100
  +++ vmlinux.bad.sect    2013-02-01 23:49:02.000000000 +0100
  @@ -1,5 +1,5 @@

  -vmlinux.good:     file format elf32-powerpc
  +vmlinux.bad:     file format elf32-powerpc

   Sections:
   Idx Name          Size      VMA       LMA       File off  Algn
  @@ -53,43 +53,35 @@
                     CONTENTS, ALLOC, LOAD, READONLY, DATA
    24 .machine.desc 00000460  c04e1000  004e1000  004f1000  2**2
                     CONTENTS, ALLOC, LOAD, DATA
  - 25 .data         0000f6a0  c04e2000  004e2000  004f2000  2**12
  + 25 .data         0001635c  c04e2000  004e2000  004f2000  2**12
                     CONTENTS, ALLOC, LOAD, DATA
  - 26 .data..init_task 00002000  c04f2000  004f2000  00502000  2**3
  -                  CONTENTS, ALLOC, LOAD, DATA
  - 27 .data..page_aligned 00002000  c04f4000  004f4000  00504000  2**12
  -                  CONTENTS, ALLOC, LOAD, DATA
  - 28 .data..cacheline_aligned 00000c00  c04f6000  004f6000  00506000
    2**5
  -                  CONTENTS, ALLOC, LOAD, DATA
  - 29 .data..read_mostly 000015e0  c04f6c00  004f6c00  00506c00  2**3
  -                  CONTENTS, ALLOC, LOAD, DATA
  - 30 .sbss         000002e0  c04f9000  004f9000  005081e0  2**3
  + 26 .sbss         000002e0  c04fa000  004fa000  0050835c  2**3
  <...>

This causes boot hang on powerpc. Modify the patch to
ensure that the kernel specific '.data..*' sections
remain separate.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35447
 2013-02-02 09:30:47 +00:00