a90135949f
brcm47xx: remove support for kernel 3.18
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47199
2015-10-17 11:50:16 +00:00
f8a14765b8
brcm47xx: describe 300-fork_cacheflush.patch & 310-no_highpage.patch
...
These were initially commited in r9285.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47058
2015-09-27 06:53:12 +00:00
c6c4b2640f
brcm47xx: describe 160-kmap_coherent.patch
...
It was initially commited in r6642.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47057
2015-09-27 06:24:33 +00:00
6eadb62f70
brcm47xx: describe 610-pci_ide_fix.patch
...
It was initially commited in r20924.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47056
2015-09-27 06:05:53 +00:00
c6e30d6d7a
brcm47xx: detect Netgear R6300 V1 & support reset button
...
It's still far from complete support.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46880
2015-09-11 20:00:02 +00:00
5b04888848
brcm47xx: update to kernel 4.1
...
This makes bcm53xx use kernel 4.1 by default now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46878
2015-09-11 18:52:42 +00:00
5caee877dc
brcm47xx: increase max image size
...
the trx utile uses a maximum image size of 7.2MB. There are brcm47xx
devices even with serial flash with bigger flash chips, but OpenWrt was
not able to create images for these devices. This patch provides an
additional parameter which increases this limit to 32 MB. There is a
warning in the trx utile code which suggests that bigger images could
overwrite the nvram partition on some devices, but normally the program
writing the image should make sure that it is safe to write it to the
flash.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46872
2015-09-11 17:55:28 +00:00
c9bebfb9ce
brcm47xx: break long lines in image Makefile
...
This patch changes nothing on the behaviour, it just breaks long lines
with bin/trx to make it easier to add additional parameters.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46871
2015-09-11 17:54:55 +00:00
bda4c3d5e5
brcm47xx: apply serial flash size trick to Netgear WNR1000 V3
...
It also uses different block size just like WGR614 V10.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46810
2015-09-08 05:24:57 +00:00
d2a9c35af0
brcm47xx: fix reading WGT634U CFE variables with 4.1
...
This ports fix from r46584 to the 4.1.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46806
2015-09-07 16:43:29 +00:00
da2178eb7e
brcm47xx: add Netgear WNR1000 V3 support in the Linux arch code
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46805
2015-09-07 16:29:21 +00:00
7d6cff4882
kernel: update 3.18 to 3.18.21
...
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.21
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46768
2015-09-02 10:18:15 +00:00
f5601a97a2
brcm47xx: disable the openwrt commandline hack
...
We don't make use of it, so no need to have it enabled.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46756
2015-08-30 12:17:57 +00:00
a9559efe43
brcm47xx: fix Linksys E1200 V2 image filename
...
Drop unwanted suffix (copy & paste mistake).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46742
2015-08-29 09:23:19 +00:00
2d379e796f
kernel: update 4.1 to 4.1.6
...
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.6
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46713
2015-08-23 18:06:11 +00:00
6be2305da8
kernel: update 4.1 to 4.1.5
...
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.5
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46598
2015-08-14 13:06:33 +00:00
4ecae78c16
image.mk: replace all Build/netgear-chk with a generic implementation
...
Instead of letting each target define it themselves, create on in
include/image.mk and let the targets use it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46596
2015-08-14 13:05:14 +00:00
bee065262a
brcm47xx: prefix netgear specific device variables with NETGEAR_
...
Rename BOARD_ID to NETGEAR_BOARD_ID and REGION to NETGEAR_REGION.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46594
2015-08-14 13:04:22 +00:00
4561cc2cca
brcm47xx: fix reading WGT634U CFE variables
...
We got check for nvram_len placed too early and the code never tried
reading CFE variables used on WGT634U. This is a regression introduced
in r45942 and reported in #20291 .
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46584
2015-08-12 13:29:22 +00:00
b5b630ae38
brcm47xx: add support for kernel 4.1
...
This adds support for kernel 4.1 and removes kernel 4.0.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46166
2015-07-03 23:18:33 +00:00
0f5b1a3eca
kernel: update 4.0 to 4.0.5
...
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.5
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46063
2015-06-19 11:12:43 +00:00
9a59b350b7
kernel: update 3.18 to 3.18.16
...
Changelogs:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46011
2015-06-17 09:54:55 +00:00
b273bb1896
brcm47xx: backport BCM47XX patches (NVRAM & BCMA_HOST_PCI)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45942
2015-06-10 19:52:07 +00:00
bd150495bb
brcm47xx: refresh kernel config
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45921
2015-06-07 10:09:10 +00:00
46bc3ed25a
brcm47xx: sysupgrade: drop useless shift in platform.sh
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45913
2015-06-06 17:25:57 +00:00
fc0776f2c7
brcm47xx: backport MIPS BCM47XX changes queued for 4.2
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45906
2015-06-05 20:41:18 +00:00
0da6f8a52b
brcm47xx: extract TRX from image on the fly
...
Extracting TRX to separated file in /tmp/ requires extra RAM which may
not be available on some chepaer devices. Instead of that lets pass a
proper extracting command to the default_do_upgrade.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45901
2015-06-05 14:12:15 +00:00
6bc9e00e94
kernel: backport ssb fix for WRT350N v1 (BCM4705) reboots
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45865
2015-06-01 06:11:26 +00:00
92ebd6fdbe
brcm47xx: image: fix typo in Asus WL-500gP v2 fw file name
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45811
2015-05-28 19:53:59 +00:00
ebd651ad99
brcm47xx: add LEDs/buttos for Asus N10U
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45797
2015-05-28 08:08:17 +00:00
a5000c0af6
brcm47xx: drop 4.0 patch that is in 4.0.4
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45796
2015-05-28 08:08:11 +00:00
69aefc771f
brcm47xx: build images for Asus devices
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45789
2015-05-27 15:37:05 +00:00
048f46a075
brcm47xx: use common image prefix
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45779
2015-05-27 15:04:02 +00:00
f08a10f2b9
brcm47xx: build image for Asus RT-N66U
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45774
2015-05-27 13:54:19 +00:00
76d079204d
kernel: update 3.18 to 3.18.14
...
Changelogs:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14
Build tested on brcm63xx and ipq806x, runtested on brcm63xx.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45711
2015-05-21 19:32:46 +00:00
501da07c5d
brcm47xx: fix regression in NVRAM support for WGT634U
...
We were calculating wrong offset, NVRAM wasn't found and OpenWrt didn't
boot.
Fixes: 9019803 ("brcm47xx: backport BCM47XX arch patches (clean NVRAM code, later init)")
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45618
2015-05-06 05:54:19 +00:00
8d1580c4bb
brcm47xx: add patches for kernel 4.0
...
SVN-Revision: 45570
2015-04-23 11:31:54 +00:00
9c02b23a77
brcm47xx: add buttons support for WRT310N v2
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45474
2015-04-17 08:12:00 +00:00
b12e85a451
brcm47xx: fix handling absolute paths in sysupgrade (for vendor formats)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45472
2015-04-17 05:45:46 +00:00
e85294a957
brcm47xx: rework vendor fw handling to don't duplicate upgrade calls
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45470
2015-04-16 21:43:27 +00:00
c8eed9a50a
brcm47xx: explicitly select CPU_MIPS32_R2 and CPU_MIPSR2 for mips74k
...
The mips74k subtarget of brcm47xx configures gcc to compile for mips32r2;
however, the generated kernel config for 3.14 and later kernels ends up
with CPU_MIPS32_R1 and CPU_MIPSR1 selected. The generated kernel config
for the 3.10 kernel (Barrier Breaker) properly selected CPU_MIPS32_R2 and
CPU_MIPSR2. Modify the default kernel config for mips74k to explicitly
select CPU_MIPS32_R2 and CPU_MIPSR2.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45469
2015-04-16 21:20:37 +00:00
83e31eb7e7
bcm53xx: add USB 2.0 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45450
2015-04-15 16:06:14 +00:00
3cb8bf44e6
otrx: change command line API to start with a mode
...
This will allow adding more modes without options conflict.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45443
2015-04-14 20:50:46 +00:00
b66b0ae632
brcm47xx: drop 3.14
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45374
2015-04-11 10:28:11 +00:00
c6f9582116
brcm47xx: image: use "-" separator for device version
...
This makes legacy subtarget follow two other.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45319
2015-04-09 05:40:37 +00:00
a8b0e75291
brcm47xx: verify also standard TRX images during sysupgrade
...
It allows detecting data corruption for plain TRX as well.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45318
2015-04-09 05:36:16 +00:00
3fad95446a
brcm47xx: fix WRT300N devices magics for sysupgrade check
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45317
2015-04-09 05:22:10 +00:00
44b128b0aa
brcm47xx: switch to the otrx for verifying TRX images
...
This adds checking CRC32 of provided firmware image.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45316
2015-04-09 05:22:04 +00:00
80971cd0f9
brcm47xx: image: use new (& fixed) FILESYSTEM variable for trx command
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45313
2015-04-08 09:50:57 +00:00
705651884d
brcm47xx: update legacy subtarget description
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45310
2015-04-08 05:55:32 +00:00
7798074429
brcm47xx: add fix "Data bus error" on CardBus ssb SoCs
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45308
2015-04-08 05:09:42 +00:00
1d2abb6f16
brcm47xx: reverse 2 LEDs polarity on WRT320N v1
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45307
2015-04-08 04:46:27 +00:00
95f7fb8f49
brcm47xx: define rest of LEDs & buttons for WRT320N
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45304
2015-04-07 21:31:36 +00:00
503d845522
brcm47xx: drop old patch disabling cardbus mode on Netgear WNR834B
...
First of all this patch was affecting other devices, not just Netgear
WNR834B. E.g. Linksys WRT300N v1 also has boardtype 0x0472.
This was breaking PCI on WRT300N, ssb couldn't detect core working in
hostmode (due to mips_busprobe32 failing).
Secondly this patch should not be needed for years now. From the analyze
of #8861 it seems it was needed just to make devices at slots other than
0 discoverable. Setting cardbus to 0 was simply making ssb allow access
to PCI config for devices other than bridge.
With the upstream commit a6c8462 (ssb: fix cardbus slot in hostmode) we
allow accessing device at slot 1 which should be enough for CardBus.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45293
2015-04-07 15:40:51 +00:00
e2b59e4dbc
brcm47xx: detect Linksys WRT320N v1
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45289
2015-04-07 13:08:17 +00:00
9f740ddc0d
brcm47xx: backport MIPS BCM47XX patches queued for 4.1
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45288
2015-04-07 12:54:23 +00:00
3fa00eeda2
brcm47xx: group MIPS BCM47XX backported patches by source kernel
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45287
2015-04-07 11:54:18 +00:00
aefcd2b84c
brcm47xx: backport two MIPS nvram.c patches
...
Also replace SPROM patch with (the same) mainlined version.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45227
2015-04-01 20:23:37 +00:00
9c5aa7c528
brcm47xx: image: share function checking TRX in provided firmware
...
This will allow us to calculate crc32 in a shared code.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45202
2015-03-31 21:16:19 +00:00
090a510576
brcm47xx: image: convert legacy Linksys & Netgear devices
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45184
2015-03-31 12:44:31 +00:00
4faba3cc2e
brcm47xx: image: convert generic subtarget to the new images system
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45183
2015-03-31 12:17:08 +00:00
3d481d31ed
brcm47xx: image: convert all mips74k images to the new building system
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45181
2015-03-31 11:26:50 +00:00
184c0af4e2
brcm47xx: image: add helpers for defining devices
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45180
2015-03-31 11:26:45 +00:00
6c1852cb26
brcm47xx: image: use standard KERNEL_IMAGE to avoid warnings
...
KERNEL_IMAGE is used as target rule so reusing the same name causes:
Makefile:326: warning: overriding recipe for target `bin/brcm47xx/vmlinux.lzma'
Makefile:326: warning: ignoring old recipe for target `bin/brcm47xx/vmlinux.lzma'
Makefile:326: warning: overriding recipe for target `build_dir/target-mipsel_74kc+dsp2_uClibc-0.9.33.2/linux-brcm47xx_mips74k/vmlinux.lzma'
Makefile:326: warning: ignoring old recipe for target `build_dir/target-mipsel_74kc+dsp2_uClibc-0.9.33.2/linux-brcm47xx_mips74k/vmlinux.lzma'
Unfortunately this will cause copying vmlinux.lzma over and over like:
cp vmlinux.lzma FOO-kernel.bin
which is redundant on brcm47xx where we never modify kernel image.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45178
2015-03-31 08:56:08 +00:00
8ec31f25e3
brcm47xx: fix checking cross-vendors firmware images
...
This change won't allow installing e.g. Netgear firmware on Linksys
device.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45174
2015-03-31 07:26:30 +00:00
463a449f84
brcm47xx: update Linksys firmwares (add new E2500 versions)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45173
2015-03-31 07:26:22 +00:00
a445846305
brcm47xx: display all errors (not just the 1st one) when checking image
...
This way people forcing upgrade will know what may go wrong.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45172
2015-03-31 06:05:35 +00:00
44dfe17576
brcm47xx: recognize more device specific firmwares
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45171
2015-03-31 05:39:33 +00:00
b34040f990
brcm47xx: compare provided firmware magic with device magic
...
This makes sysupgrade reject firmware images for different devices.
Right now only support for 2 sample devices is implemented.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45170
2015-03-30 22:06:11 +00:00
1751676c8b
brcm47xx: convert Netgear WNDR3700 V3 to the new image building system
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45144
2015-03-29 19:53:11 +00:00
8e4b74b9fe
brcm47xx: convert Linksys E1200 V2 to the new image building system
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45143
2015-03-29 18:15:38 +00:00
8fdd0fb07c
kernel: backport rest of bcma patches
...
This backports
bcma: allow disabling (not building) PCI driver
Revert "bcma: Kconfig: Let it depend on PCI"
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44970
2015-03-24 10:39:10 +00:00
76811de003
brcm47xx: support SPROM/NVRAM prefixes
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44855
2015-03-17 07:07:17 +00:00
917fb76321
brcm47xx: rename (and refresh) MTD patch for safety "nvram" partition
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44854
2015-03-17 07:07:00 +00:00
8f63c1405f
brcm47xx: switch to 3.18
...
Tested on BCM5357B0, BCM47186B0 and BCM4706.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44853
2015-03-16 23:05:43 +00:00
d15ac306fa
kernel: move KERNFS to generic config
...
KERNFS symbol is selected by SYSFS, so place it in generic config.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44615
2015-03-06 07:56:47 +00:00
f04a268a04
kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED
...
Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since
only one platfrom (omap) needs them.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44614
2015-03-06 07:56:34 +00:00
7886cced18
kernel: remove GENERIC_NET_UTILS from platform configs
...
CONFIG_GENERIC_NET_UTILS is selected by CONFIG_NET and already enabled
in generic config, so we don't need this symbol in platform specific
configurations.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44611
2015-03-06 07:55:57 +00:00
3069934e37
brcm47xx, brcm63xx: disable CONFIG_MIPS_O32_FP64_SUPPORT
...
The flag is experimental and requires toolchain support, which we don't
provide. Also neither target has an FPU so it becomes meaningless
without the FPU emulator enabled.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44584
2015-03-01 11:37:18 +00:00
6296b8ca9f
kernel: backport queued bcm47xxpart changes
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44156
2015-01-27 22:08:14 +00:00
3bdf05441a
brcm47xx: backport BCM47XX arch patches (clean NVRAM code, later init)
...
SVN-Revision: 43979
2015-01-16 12:48:27 +00:00
81b8d95f2c
brcm47xx: support for flashing CHK and CyberTAN images
...
This will allow simple sysupgrade-s including simpler reverting to the
original firmware.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43799
2014-12-30 17:19:36 +00:00
cca3990b16
brcm47xx: verify if CHK/CyberTAN contains valid TRX
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43798
2014-12-30 17:19:02 +00:00
c3e9796cd5
brcm47xx: extract magics from specific upgrade images (and still reject them)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43718
2014-12-15 11:09:14 +00:00
019ea725aa
add "preinit_regular" diag.sh set_state argument
...
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
a5b6b7e419
brcm47xx: detect (and still reject for now) CyberTAN fw format
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43714
2014-12-15 09:59:44 +00:00
b5b4bdc066
brcm47xx: use separated function in upgrade to detect file type
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43708
2014-12-15 08:51:14 +00:00
73237c0c9b
brcm47xx: add WNDR3400 V3 buttons
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43579
2014-12-08 17:02:28 +00:00
9a495f6bbb
kernel: refresh patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43564
2014-12-08 12:04:25 +00:00
563f963b1b
kernel: refresh patches for kernel 3.18
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43536
2014-12-07 16:12:44 +00:00
8e738da02c
brcm47xx: remove kernel 3.10
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43535
2014-12-07 15:34:28 +00:00
1020b84266
brcm47xx: add early support for WNDR3400 V3
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43532
2014-12-07 00:58:40 +00:00
c84fe94b0d
brcm47xx: add support for Netgear WGR614 V10
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43336
2014-11-20 22:15:21 +00:00
ac7e0e69bb
brcm47xx: mtd: bcm47xxpart: lower minimal blocksize to 4Ki (from 64Ki)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43322
2014-11-19 17:35:24 +00:00
a69ebe234d
kernel: update kernel 3.18 to rc4
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43229
2014-11-10 22:51:30 +00:00
e30531cd67
brcm47xx: add config for kernel 3.18
...
This adds a kernel config for kernel 3.18
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43140
2014-10-31 23:54:33 +00:00
0100a8a68e
brcm47xx: initial support for kernel 3.18
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43100
2014-10-28 10:26:00 +00:00
c288d2d6d9
kernel: makefiles: make use of new var KERNEL_PATCHVER
...
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 43047
2014-10-24 19:34:02 +00:00
20940138ac
scripts: fix wrong usage of '==' operator
...
[base-files] shell-scripting: fix wrong usage of '==' operator
normally the '==' is used for invoking a regex parser and is a bashism.
all of the fixes just want to compare a string. the used busybox-ash
will silently "ignore" this mistake, but make it portable/clean at least.
this patch does not change the behavior/logic of the scripts.
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 42911
2014-10-14 12:21:11 +00:00
746b80f166
brcm47xx: image: create initramfs TRX nodictionary images
...
Signed-off-by: Stephen Parry <sgparry@mainscreen.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42889
2014-10-13 05:53:33 +00:00
Hauke Mehrtens
Rafał Miłecki
Jonas Gorski
John Crispin
Jo-Philipp Wich
Felix Fietkau
Luka Perkov