Commit Graph

274 Commits (b8562f168b2bb2defc87e94db6ff98fe8471dc71)

Author SHA1 Message Date
Sergey Ryazanov 67a3cdcbb0 kernel: enable THIN_ARCHIVES by default
THIN_ARCHIVES option is enabled by default in the kernel configuration
and no one target config disables it. So enable it by default and remove
this symbol from target specific configs to keep them light.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:55:20 +02:00
Sergey Ryazanov bdc2b58c4b kernel: enable FUTEX_PI by default
New FUTEX_PI configuration symbol enabled if FUTEX and RT_MUTEX symbols
are enabled. Both of these symbols are enabled by default in the
generic config, so enable FUTEX_PI by default too to keep platform
specific configs minimal.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:55:12 +02:00
Sergey Ryazanov a08b0d0c31 kernel: enable EXPORTFS by default
OVERLAY_FS config symbol selects EXPORTFS since 4.12 kernel, we have
OVERLAY_FS enabled by default, so enable EXPORTFS in the generic config
of 4.14 and remove this option from platform specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:55:05 +02:00
Sergey Ryazanov 978543a246 kernel: disable DRM_LIB_RANDOM by default
DRM_LIB_RANDOM config symbol selected only by DRM_DEBUG_MM_SELFTEST
which is disable by default, so disable DRM_LIB_RANDOM by default too.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:54:57 +02:00
Sergey Ryazanov ead26e9db6 kernel: disable DMA_{NOOP|VIRT}_OPS by default
These options do not used by any supported arch, so disable them by
default to make arch configs a bit more clean.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:54:49 +02:00
Sergey Ryazanov f928c338ad kernel: disable ARCH_WANTS_THP_SWAP by default
Only one arch (x86_64) enables this option. So disable
ARCH_WANTS_THP_SWAP by default and remove referencies to it from all
configs (except x86_64) to make them clean.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:54:42 +02:00
Hauke Mehrtens 6734ffb851 kernel: generic: Move config option to generic
This is deactivated in all targets using the DSA switch driver with
kernel 4.14.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-03-02 21:32:19 +01:00
Koen Vandeputte efb362cd93 imx6: disable dma on uart
When this target got updated to 4.14, this patch got removed to
re-evaluate if it was still needed.

Extensive testing now shows this issue is still present.
Let's re-add the patch to fix it for now.

As the uart bus is very low bandwidth .. performance impact is negligible.

Boot log:

[   22.513051] imx-uart 2020000.serial: DMA transaction error.
[   22.522721] imx-uart 2020000.serial: DMA transaction error.

As a sidenote:
The patch mentiones an issue with RS485, but the bootlog
errors above were recorded with the uart ports in standard RS232 mode.

Compile/Run-tested on imx6/GW5200

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-02-22 12:46:49 +01:00
Tim Harvey 1188f35a98 imx6: remove support for 4.9
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-02-19 09:32:43 +01:00
Tim Harvey 8f9668f46c imx6: switch to Linux 4.14
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-02-19 09:32:43 +01:00
Tim Harvey 3b2708f09c imx6: add support for Linux 4.14
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-02-19 09:32:43 +01:00
Mathias Kresin 188328111b treewide: move nand_do_upgrade call to platform_do_upgrade
Calling nand_do_upgrade() from platform_pre_upgrade() was deprecated
with 30f61a34b4 ("base-files: always use staged sysupgrade").

Update the platform upgrade code to use platform_do_upgrade() for NAND
images as well.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-02-16 14:44:02 +01:00
Adrià Llaudet 90ceb0aeb1 imx6: use DTS_DIR at image build code
Use "$(DTS_DIR)", defined at include/image.mk, instead of
"$(LINUX_DIR)/arch/$(LINUX_KARCH)/boot/dts" in order to generalize and
allow a better Device/* device-tree parameterization (i.e. DEVICE_DTS_DIR
and DTS_DIR).

Signed-off-by: Adrià Llaudet <adria.llaudet@gmail.com>
2018-02-10 21:02:53 +01:00
Koen Vandeputte 8954bc31ed imx6: add support for the intel gbit driver on GW5520
The Gateworks GW5520 board uses 2x intel gigabit mac's, instead of the
internal i.MX6 FEC.

Add support for these.

Signed-off-by: Scott V. Kamp <outbackdingo@gmail.com>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-01-17 11:07:17 +01:00
Luis Araneda 575178e462 treewide: add only one device when appending to TARGET_DEVICES
This will avoid some conflicts when doing a git rebase or merge,
specially when adding support to a new device.

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
[drop brcm47xx changes which rename the images]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-12-12 18:47:26 +01:00
Koen Vandeputte 0997185ffd imx6: add driver for temp/voltage monitoring
The Gateworks System Controller (GSC) mimics a standard AD7418 device on
I2C bus 0 at slave 0x29.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-08-18 18:47:11 +02:00
Koen Vandeputte bfada08399 imx6: refresh kernel config
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-08-18 18:46:43 +02:00
Mathias Kresin e0b9ec8e96 treewide: drop target board_name functions
They are not used any longer.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Mathias Kresin f12a32630f treewide: use the generic board_name function
Use the generic function instead ot the target specific ones.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Mathias Kresin 78cf5eed6e treewide: do board detection during preinit
Do the board detection during preinit to unify it across all targets.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Mathias Kresin f7eb7f577f imx6: fix DualLite/Solo GW551X board detection
The model name is a different one in the device tree source file.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 07:02:59 +02:00
Stijn Tintel 880f73c327 kernel: cleanup CONFIG_SCHED_HRTICK
Remove CONFIG_SCHED_HRTICK from target configs, as it was added to the
generic config in b47fd76563.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-06-29 04:46:59 +02:00
Sergey Ryazanov 68e7a2a0b7 kernel: disable CONFIG_SG_POOL by default
CONFIG_SG_POOL symbol is selected only by CONFIG_SCSI, since the last
one is disabled by default then disable CONFIG_SG_POOL by default too.
And explicitly enable it only for platforms that use CONFIG_SCSI.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2017-06-07 18:31:10 +02:00
Koen Vandeputte 3b4241071d imx6: disable UART dma
Fixes these prints on boot:

[   13.785600] imx-uart 2020000.serial: DMA transaction error.
[   13.793134] imx-uart 2020000.serial: DMA transaction error.
[   13.798721] imx-uart 2020000.serial: DMA transaction error.

Based on following upstream patch by Tim Harvey (Gateworks):

80a01b6582

TX complete DMA messages are getting missed.
This is also currently an issue in mainline.
For now we will disable DMA in serial/imx.c.

This resolves an issue encountered with RS485 transmit.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-05-31 08:45:26 +02:00
Koen Vandeputte e842e16f45 kernel: update kernel 4.9 to 4.9.29
- Refresh all patches
- Removed upstreamed
- Adapted 1

Compile tested on: bcm53xx, cns3xxx, imx6, lantiq
Run tested on: cns3xxx & imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[update from 4.9.28 to 4.9.29]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-05-21 21:51:22 +02:00
Felix Fietkau 60081f9a00 imx6: remove linux 4.4 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-05-02 15:17:30 +02:00
Tim Harvey 9d91ef52c3 imx6: ventana: add GW553x board identification
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-04-26 11:52:55 +02:00
Tim Harvey 456bd95023 imx6: disable MSI interrupts
The IMX6 PCIe host controller does not fire legacy interrupts if MSI is
enabled. A patch is being worked on to enable MSI at runtime only when
it is needed but meanwhile this patch will disable MSI for the imx6 kernel.

This fixes the no interrupt issue on cards/drivers that use legacy interrupts
such as ath9k.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-04-26 11:52:55 +02:00
Tim Harvey bc1e7469aa imx6: apply upstream mmc fix for DDR50 cards on UHS-I capable boards
https://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git/commit/?h=fixes&id=9f327845358d3dd0d8a5a7a5436b0aa5c432e757

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-04-26 11:52:55 +02:00
Hauke Mehrtens c3778f2647 kernel: update kernel 4.4 to 4.4.59
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-04-02 12:48:00 +02:00
Tim Harvey b2255f3621 imx6: add DSA driver for MV88E6176 switch
The MV88E6176 switch is present on the GW16083 and the GW5904

As of a5c32a1f19 these drivers are to be
enabled static in per-target kernels.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-12 15:06:52 +01:00
Tim Harvey 5f458bf7f8 imx6: add support for GW5904
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-12 15:06:51 +01:00
Tim Harvey 35d761c0c5 imx6: added fixfdt to bootscript
If a 'fixfdt' uboot script exists, execute it prior to bootm to allow
easy bootloader env based fdt fixups and tweaks

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-12 15:06:51 +01:00
Tim Harvey 028350907e imx6: add missing dtb for imx6dl-gw553x
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-12 15:06:51 +01:00
Tim Harvey 4cc70d8610 imx6: fix USB for 4.9 kernel
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-12 15:06:50 +01:00
Tim Harvey 092f2c14bd imx6: move to Linux 4.9 kernel
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-11 15:38:11 +01:00
Koen Vandeputte d99007d5a9 imx6: refresh kernel config
This key got moved to generic in commit:
7480d3309c

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-01-27 16:11:34 +01:00
Stijn Segers 20996edd68 Kernel: bump to 4.4.44
Bump kernel to 4.4.44. Compile-tested on ar71xx, ramips/mt7621 and x86/64.

.44 has been run-tested on the 17.01 branch here on ar71xx and mt7621.

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
2017-01-27 11:18:27 +01:00
Petr Štetiar 26e4fee6e2 imx6: kernel: Backport serial port fixes
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2017-01-15 17:41:14 +01:00
Felix Fietkau a2f6b56c8f imx6: enable the crypto acceleration driver in the kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau 7450698957 imx6: enable the chipidea usb driver in the kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau 7f0796d874 imx6: remove kmod-thermal-imx, it is already enabled in the kernel config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau 348fedc1a6 imx6: build support for the ventana ethernet expansion board into the kernel instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau c524d1b256 imx6: enable the Freescale SNVS RTC driver in the kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau 1c6b1ab01d imx6: fix image boot ubifs compression option
--force-compr was added by the xz compression patch, which is gone now.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-09 16:29:45 +01:00
Felix Fietkau 018d80007e kernel: remove ubifs xz decompression support
It has been unused, and less useful than squashfs for cases where flash
space usage matters.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-09 14:07:06 +01:00
Koen Vandeputte d9c3727288 imx6: Add ds1672 RTC to kernel for working hctosys (Gateworks)
Fixes the same hctosys init issue as described in commit
5481ce9a11

The Gateworks Ventana family uses an emulated Dallas 1672
RTC device.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2016-10-27 00:34:01 +02:00
Petr Štetiar 5481ce9a11 imx6: Add ds1307 RTC to kernel for working hctosys
Otherwise if we use ds1307 as kernel module, hctosys fails as ds1307 is
being initialized later then hctosys:

 [    2.427349] hctosys: unable to open rtc device (rtc0)
 [    3.714263] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1
 [    8.990061] rtc-ds1307 3-006f: rtc core: registered mcp7941x as rtc0

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2016-10-26 09:41:29 +02:00
Petr Štetiar 5a922e5c41 imx6: inittab: Use login.sh wrapper so we can configure console password
In dc92917 there was introduced login.sh wrapper which allows
configuration of console passwords via UCI system ttylogin config
option.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2016-10-15 11:36:51 +02:00
Álvaro Fernández Rojas 41eab9048b kernel: update kernel 4.4 to version 4.4.21
Refresh patches for all targets that support kernel 4.4.
Compile-tested on brcm2708 only.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-16 10:17:27 +02:00