Commit Graph

172 Commits (b809725eb185c00c14e34d8e4e9d5c4d30a5a985)

Author SHA1 Message Date
Jo-Philipp Wich 67e1c87012 all: drop old uci-defaults.sh
Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47867
2015-12-11 15:26:06 +00:00
Jo-Philipp Wich 08848936dd all: remove redundant board.d/00_model files
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47753
2015-12-04 11:07:06 +00:00
Jo-Philipp Wich 81f1ccbf96 at91: switch from uci-defaults to board.d
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47740
2015-12-03 23:07:38 +00:00
John Crispin 0ff8c94aab at91: fix usb rate backport patch tab mangle
The patch submitted in [46649] was mangled in the use of gmails webmail interface, tabs replaced with spaces, resulting in a patch which dit not apply.
This should fix the issue, sorry for the noise.

Signed-off-by: Ben Whitten <benwhitten@gmail.com>

SVN-Revision: 46676
2015-08-17 16:10:49 +00:00
John Crispin 8e90f20bf7 at91: Backport determine_rate prototype fix
This patch is backport of a fix to a USB prototype mismatch bug found
in 3.18 kernels, originally submitted by Boris Brezillon [1].
The symptom of this bug was that devices attached to the at91 using
at91_ohci on a hub never appeared and failed to initialise.

[1] http://www.spinics.net/lists/linux-usb/msg125969.html

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>

SVN-Revision: 46649
2015-08-17 06:16:29 +00:00
Florian Fainelli ad576d262d at91: add Device Tree based board detection
Set up eth0 as LAN interface by default.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 46174
2015-07-04 01:25:15 +00:00
Florian Fainelli 4748d69f33 at91: sama5d3: enable USB2 by default
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 46173
2015-07-04 01:24:48 +00:00
Florian Fainelli d04f231706 at91: enable Micrel PHY driver
The AT91 SAMA5D3XPLAINED uses a KSZ9031 and a KSZ8081 that are supported
by this PHY driver.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 46171
2015-07-04 01:24:27 +00:00
Jo-Philipp Wich ba9f34a389 at91: fix imagebuilder
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45806
2015-05-28 13:25:21 +00:00
Jonas Gorski 76d079204d kernel: update 3.18 to 3.18.14
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
2015-05-21 19:32:46 +00:00
John Crispin f04a268a04 kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED
Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since
only one platfrom (omap) needs them.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44614
2015-03-06 07:56:34 +00:00
John Crispin fa097e5ae5 kernel: disbale HAMRADIO in generic config
HAMRADIO enabled in all generic configs, but no one platform directly
use related drivers/protocols. This symbol is only used for kmod-ax25
package modules. Furthermore, half of platforms explicitly disables
this symbol, what silently disables build of modules for kmod-ax25
package.

So disable HAMRADIO by-default in generic config, add it to kmod-ax25
package and remove it from platform specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44613
2015-03-06 07:56:21 +00:00
John Crispin f1625b116f at91: add SAMA5D3-Xplained board UBI parameters to makefile.
Signed-off-by: Songjun Wu <songjun.wu@atmel.com>

SVN-Revision: 44604
2015-03-05 20:24:57 +00:00
John Crispin 0227827f7b at91: Add dts for Exegin Q5x boards.
Signed-off-by: Owen Kirby <osk@exegin.com>

SVN-Revision: 44492
2015-02-19 09:07:06 +00:00
John Crispin 3cf87e67b2 at91: USB gadget subsystem cleanup and driver fix.
Signed-off-by: Owen Kirby <osk@exegin.com>

SVN-Revision: 44491
2015-02-19 09:06:56 +00:00
John Crispin 6fb59689c6 at91: Enable power and reset controller drivers.
Signed-off-by: Owen Kirby <osk@exegin.com>

SVN-Revision: 44490
2015-02-19 09:06:49 +00:00
John Crispin 4a6e468588 at91: bump to v3.18
Signed-off-by: Your Name <blogic@openwrt.org>

SVN-Revision: 44489
2015-02-18 13:35:46 +00:00
Felix Fietkau d34e2a337c at91: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43688
2014-12-13 11:55:24 +00:00
Felix Fietkau c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
2014-10-24 19:34:02 +00:00
John Crispin 4b45695c9a at91: fix at91-adc dependencies
Error reported by buildbot:
Package kmod-at91-adc is missing dependencies for the following libraries:
input-core.ko

only compile tested

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 42893
2014-10-13 19:45:31 +00:00
John Crispin ec69988d09 at91: remove support for TQMa9263
This board is EOL, we should not bother anymore with it.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 42825
2014-10-06 20:08:40 +00:00
Hauke Mehrtens d56a44040d kernel: do not deactivate CONFIG_BLK_DEV
CONFIG_BLK_DEV does not activate any functionality, but many code, but
makes it possible to activate other options. Deactivating this breaks
the build of kmod-zram.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42528
2014-09-13 22:10:00 +00:00
Luka Perkov 02629d8f87 kernel: update 3.14 to 3.14.18
Targets were build tested and patches are refreshed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42463
2014-09-10 21:40:19 +00:00
Florian Fainelli d2a420fa22 at91: build images for AT91SAMA5D3XPLAINED
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42418
2014-09-03 03:11:25 +00:00
Florian Fainelli 7175e520e1 at91: add SAMA5D3 subtarget
Add a subtarget for Atmel's SAMA5D3 Cortex-A5 based SoCs.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42417
2014-09-03 03:11:11 +00:00
Florian Fainelli 00c0f4f27a at91: move legacy Kconfig options to subtarget
Some Kconfig options are only relevant for the legacy platforms, move
them where they belong

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42416
2014-09-03 03:10:59 +00:00
Florian Fainelli 640579bf49 at91: switch to 3.14
We need a new kernel version to support Cortex-A5 based platforms such
as SAMA5GD3.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42415
2014-09-03 03:10:47 +00:00
Florian Fainelli 892d571d07 at91: add 3.14 support
Add support for Linux 3.14 for the Atmel's AT91 platform.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42414
2014-09-03 03:10:18 +00:00
Florian Fainelli 035f68e858 at91: move 3.10 specific files and patches
In preparation for adding 3.14 kernel support, move files and patches to
a separate per-version directory since some of them will have
incompatible changes (e.g: dts)

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42413
2014-09-03 03:09:51 +00:00
Florian Fainelli 132676f1ac at91: add Kconfig symbol for CONFIG_USB_ATMEL_USBA
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42412
2014-09-03 03:09:36 +00:00
Florian Fainelli 5efbc41cbb at91: fix typo on Calao
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42410
2014-09-03 03:09:14 +00:00
Florian Fainelli c2b92f9ef4 at91: create a legacy subtarget
In preparation for adding SAMA5D3 support, move the legacy ARMv5 based
platforms to a separate subtarget.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42408
2014-09-03 03:08:51 +00:00
John Crispin 7d8f187201 target/linux/*/image/Makefile: use new dts path variable
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41791
2014-07-21 18:42:06 +00:00
John Crispin ba63338d3f kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41776
2014-07-20 17:31:11 +00:00
Gabor Juhos d0ad8c00b6 kernel: sort Kconfig options in kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41614
2014-07-13 16:25:54 +00:00
John Crispin 994e5ce2f9 kernel: update 3.10.36->3.10.44
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41351
2014-06-26 13:47:42 +00:00
John Crispin e9f664c879 kernel: make sure the new UBIBLOCK symbol does not break builds
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41134
2014-06-11 13:00:17 +00:00
Hauke Mehrtens f5e5477c81 kernel: modify mtd related patches for 3.14
The change is the same as ("kernel/generic: modify mtd related
patches"). Since these files are under files directory, not a files
directory of specific kernel version, better to also change them. So
it will avoid adding files to future specific files directory
(e.g. files-3.14) for this mtd related change.

Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>

SVN-Revision: 40732
2014-05-08 21:52:04 +00:00
Hauke Mehrtens fe38dcf8f3 at91: Add AT91 board and model name to /tmp/sysinfo
From 9158e3282db592e78fb32a2c8a0903ef21b97f5c Mon Sep 17 00:00:00 2001
 From: Owen Kirby <osk@exegin.com>
 Date: Fri, 11 Apr 2014 18:28:56 -0700
 Subject: [PATCH 3/3] [at91] Add AT91 board and model name to /tmp/sysinfo.

This patch extracts the board name and model information from the /proc/device-tree
node in order to provide something a little more friendly on the LuCI sysinfo page
than just "AT91SAM9 (Device Tree)"

Signed-off-by: Owen Kirby <osk@exegin.com>

SVN-Revision: 40598
2014-04-29 21:02:40 +00:00
Hauke Mehrtens b5f9e1632b at91: AT91SAM9G20-EK fixes
From 272f548fe8d0b811e0589e535f650f0507f6bccd Mon Sep 17 00:00:00 2001
 From: Owen Kirby <osk@exegin.com>
 Date: Fri, 11 Apr 2014 17:59:55 -0700
 Subject: [PATCH 2/3] [at91] AT91SAM9G20-EK fixes.

While testing the 3.10 kernel update, I found that the out-of-the-box device tree for the
the AT91SAM9G20EK uses a UBIFS rootfs and stores the DTB separately from the zImage.

Signed-off-by: Owen Kirby <osk@exegin.com>

SVN-Revision: 40597
2014-04-29 21:02:05 +00:00
Hauke Mehrtens f6cd23364b Update AT91 kernel to 3.10.34
From 2064e6d069ec8df7f5e988547fe7f2a1a7ad890f Mon Sep 17 00:00:00 2001
 From: Owen Kirby <osk@exegin.com>
 Date: Thu, 10 Apr 2014 19:02:15 -0700
 Subject: [PATCH 1/3] [at91]  Update AT91 kernel to 3.10.34.

This patch updates the kernel of the AT91 target to version 3.10.34.

Signed-off-by: Owen Kirby <osk@exegin.com>

SVN-Revision: 40596
2014-04-29 21:00:50 +00:00
Hauke Mehrtens f4cd36d825 at91: fix typo in network file
This closes #14474.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38842
2013-11-17 17:14:32 +00:00
Hauke Mehrtens e28d2b88ea at91: fix missing drivers/iio/adc/at91-adc.ko in kmod-at91-adc
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38273
2013-10-01 22:37:17 +00:00
Felix Fietkau c8609ab4f8 build: unify arm target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38211
2013-09-26 17:53:20 +00:00
Felix Fietkau 73c4d73d6d build: unify target independent optimization options
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37600
2013-07-29 09:38:29 +00:00
Jonas Gorski 1beaf031d1 target: don't build jffs2 nor images by default
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36863
2013-06-05 20:58:59 +00:00
Gabor Juhos 46225b99d9 kernel: update linux 3.8 to 3.8.13
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36724
2013-05-26 16:02:31 +00:00
Gabor Juhos e57c7d6c12 kernel: update linux 3.8 to 3.8.12
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36576
2013-05-08 08:53:53 +00:00
Gabor Juhos bb429757c8 at91: build .dtb file for the CalAmp LMU500 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36542
2013-05-03 19:01:00 +00:00
Gabor Juhos 8a9fe26f20 kernel: update linux 3.8 to 3.8.11
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36507
2013-05-01 22:15:18 +00:00