2fb993fdbf
firmware-utils/mktplinkfw: add support for the TL-MR10U board
...
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370
Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37549
2013-07-26 07:32:00 +00:00
b5b3e94132
tools: add Broadcom cable modem firmware image creator
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36873
2013-06-06 22:21:52 +00:00
3a407a0986
firmware-utils/mkcameofw: allow to use combined kernel image
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36583
2013-05-08 17:11:08 +00:00
9658206abc
firmware-utils/mktplinkfw: add description for -W option into usage output
...
Add description for -W <hwrev> option into usage output of mktplinkfw.
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36497
2013-04-30 10:44:10 +00:00
85db8b7a21
firmware-utils/mktplinkfw: add support for the TL-WR720N v3 board
...
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36455
2013-04-26 17:00:47 +00:00
48feea4861
Add Netgear WNCE2001 (OF version)
...
Add Netgear WNCE2001.
This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.
Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming
The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.
The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.
http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36289
2013-04-09 14:19:33 +00:00
55e2ae7452
firmware-utils/mktplinkfw: Add support for MR3420v2
...
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3441/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35963
2013-03-11 15:55:23 +00:00
ddb29bebf5
firmware-utils/mktplinkfw: add support for the TL-WA830RE v1/v2 boards
...
Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35787
2013-02-25 20:37:32 +00:00
c75c1e03a3
firmware-utils/mktplinkfw: add support for the TL-WDR4900 v1
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35593
2013-02-13 16:51:24 +00:00
cbeb862b95
firmware-utils/mktplinkfw: add TP-LINK TL-WR743ND v2 support
...
AR9331 based, these same as 741v4
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35448
2013-02-02 10:01:11 +00:00
2739a19992
adds support for Edimax BR-6524N
...
fixes #12754
Signed-off-by: <rq@akl.lt>
SVN-Revision: 35019
2013-01-06 11:11:30 +00:00
cbc3aebcc7
firmware-utils/mktplinkfw: add support for the TL-MR3220 v2
...
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34781
2012-12-19 08:50:43 +00:00
113b6b96c1
firmware-utils/mkfwimage2: allow to use numbers in partition names
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34729
2012-12-17 12:28:15 +00:00
dfab9cb4e7
firmware-utils/mktplinkfw: add support for TP-LINK WA801NDv1
...
Patch-by: Amir Sagie <openwrt-devel@taproot.org.il>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34575
2012-12-07 19:10:54 +00:00
588c81d1e0
firmware-utils/mktplinkfw: add support for TL-WA7510N
...
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34189
2012-11-13 14:48:02 +00:00
86b788b1b4
firmware-utils: new tool for fixing U-Media firmware headers
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33848
2012-10-18 07:23:09 +00:00
25250a22ef
tools/firmware-utils: add seama tool
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33840
2012-10-18 07:22:57 +00:00
997ace7e5e
firmware-utils: move bcm_tag.h here
...
Since there is only one user of bcm_tag.h left, we can safely move it
into the firmware-utils directory, replacing the symlink.
SVN-Revision: 33655
2012-10-08 09:59:50 +00:00
872e798473
tools/firmware-utils: add a new tool for TEW-712BR firmware generation
...
SVN-Revision: 33233
2012-08-22 20:15:34 +00:00
6c9d20d6e7
tools/firmware-utils/ptgen option to use MB rounding
...
SVN-Revision: 33218
2012-08-22 09:22:38 +00:00
25ac1447ed
tools/firmware-utils: add tool for DIR-651-H1 firmware generation
...
Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>
SVN-Revision: 33204
2012-08-17 17:56:02 +00:00
cf1698c637
use HOST_STATIC_LINKING instead of hardcoding -static
...
SVN-Revision: 33140
2012-08-12 12:34:30 +00:00
e2e55d7acd
firmware-utils: link statically
...
SVN-Revision: 33117
2012-08-10 19:27:08 +00:00
fb81e7a802
adds mkdapimg
...
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 32822
2012-07-24 20:38:49 +00:00
a45427bc79
firmware-utils/mktplinkfw: allow to specify firmware version
...
SVN-Revision: 32616
2012-07-05 16:25:29 +00:00
b31108e0a8
tools: imagetag: add parameter for padding images
...
Allow images to be padded to a certain size. This prevents CFE from
flashing them to the second image offset.
SVN-Revision: 31875
2012-05-27 13:22:19 +00:00
de7324674a
firmware-utils/mktplinkfw: add support for the TL-WR1041N v2
...
Patch-by: Vince Huang <axishero@foxmail.com>
SVN-Revision: 31609
2012-05-05 17:02:38 +00:00
84267683bb
firmware-utils/mkfwimage: allow to override firmware magic
...
SVN-Revision: 30627
2012-02-18 14:45:54 +00:00
cd1a204365
Support booting the Speedport W502V using BRN-BOOT.
...
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.
This patch add two firmware utilities, mkbrncmdline and mkbrnboot.
mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.
mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1 .
The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage
The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.
A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 30532
2012-02-14 17:48:04 +00:00
1338af2640
firmware-utils/mkmylofw: add WPE72 support
...
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
SVN-Revision: 29913
2012-01-26 17:01:43 +00:00
ccb6b0a063
tools: clean up Makefiles / make ccache work
...
SVN-Revision: 29754
2012-01-15 11:43:13 +00:00
8a8e5bde15
firware-utils/mktplinkfw: add TL-WR2543N/ND support
...
SVN-Revision: 29681
2012-01-07 19:36:40 +00:00
923e5d3543
firmware-utils/mktplinkfw: add support for TL-WA701N/ND
...
SVN-Revision: 29655
2012-01-04 17:30:53 +00:00
55e13f4e6a
firmware-utils/mktplinkfw: add support for TL-MR3020
...
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
SVN-Revision: 29650
2012-01-04 17:30:44 +00:00
29a2c2ea80
firmware-utils/mktplinkfw: add ability to put jffs2 eof marker into the image
...
SVN-Revision: 29544
2011-12-15 22:03:42 +00:00
2592c0a283
tools/mktplinkfw: allow to specify hw_id, hw_rev and flash_layout
...
SVN-Revision: 29466
2011-12-06 16:26:41 +00:00
54c8d61b03
firmware-utils/mktplinkfw: allow to align the rootfs on a specified boundary
...
SVN-Revision: 29445
2011-12-05 14:52:31 +00:00
81cda3e2f1
firmware-utils/mktplinkfw: fix combined image creation
...
SVN-Revision: 29409
2011-12-03 16:57:21 +00:00
6632e38d08
firmware-utils/mktplinfw: use htonl/ntohl
...
Based on a patch by Adrian Chadd <adrian@freebsd.org>
SVN-Revision: 29327
2011-11-24 20:09:40 +00:00
13b0ec6cf7
firmware-utils/mktplinkfw: add TL-WR741ND v4
...
SVN-Revision: 28707
2011-11-01 11:20:54 +00:00
aadbbc4bac
Add firmware tool for generating factory images for Edimax devices
...
SVN-Revision: 28688
2011-10-30 22:57:41 +00:00
500a8e2014
firmware-utils/mktplinkfw: fix hardware id of the TL-WR740 v3
...
SVN-Revision: 28602
2011-10-26 13:34:48 +00:00
712521955b
firmware-utils/mktplinkfw: add support for TL-WR703N v1
...
Patch-by: dongyuqi <729650915@qq.com>
SVN-Revision: 28278
2011-09-21 11:47:55 +00:00
ffbdaf8ec8
firmware-utils/mktplinkfw: add support for TL-WR743ND v1
...
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 28270
2011-09-21 11:47:42 +00:00
9faace4327
firmware-utils/mktplinkfw: add support for TL-WR740N v3
...
Signed-off-by: Martin Raykov <martin.raykov@gmail.com>
SVN-Revision: 28268
2011-09-21 11:47:39 +00:00
bdb676b90d
firmware-utils: rename the devname variable in mkwrgimg to avoid a clash with a BSD stdlib function
...
SVN-Revision: 27553
2011-07-08 05:20:24 +00:00
9d980dc121
tools/firmware-utils: add yet another buffalo tool
...
SVN-Revision: 27475
2011-07-06 08:04:53 +00:00
533067b8f5
tools/firmware-utils: allow to create buffalo image from two files
...
SVN-Revision: 27473
2011-07-06 08:04:50 +00:00
ea6bc8858a
tools/firmware-utils: allow to create buffalo tags w/o hw version
...
SVN-Revision: 27472
2011-07-06 08:04:49 +00:00
1c5b7d0a32
tools/firmware-utils: add new firmware tool for the DIR-300-B1 board
...
SVN-Revision: 27438
2011-07-04 06:48:42 +00:00
Gabor Juhos
Florian Fainelli
John Crispin
Jonas Gorski
Jo-Philipp Wich
Vasilis Tsiligiannis
Felix Fietkau