Commit Graph

52 Commits (b2c58364fe96b10c6eafa0ccb81d993ad113a18b)

Author SHA1 Message Date
Felix Fietkau 3e7d58574f ar8216: rename the vlan attribute to enable_vlan to keep it consistent with other drivers
SVN-Revision: 16770
2009-07-11 01:21:01 +00:00
Felix Fietkau 3455f00d7a ar8216: fix transmission of large frames by setting the switch mtu
SVN-Revision: 16629
2009-06-29 21:54:16 +00:00
Felix Fietkau c1918c778c ar8216: add delay for page switching to work around register setting corruption. use packet mangling to fix up the vlan for incoming packets (workaround for hardware bug, which renders normal 802.1q support unusable)
SVN-Revision: 16442
2009-06-14 03:32:01 +00:00
Felix Fietkau 4e12c9d210 fix a crash in ip175c attribute enumeration
SVN-Revision: 15506
2009-04-30 13:57:22 +00:00
Felix Fietkau a523450678 Add a driver for Atheros AR8216 switches Thanks to Vertical Communications, Inc. for providing access to the documentation
SVN-Revision: 15482
2009-04-29 13:02:41 +00:00
Felix Fietkau 8ec2ad91ad swconfig: add a generic switch reset call
SVN-Revision: 15470
2009-04-28 19:16:17 +00:00
Felix Fietkau 3fce73ce46 clean up the ip175c driver some more, add support for setting the pvid and fix querying the phy status
SVN-Revision: 15308
2009-04-20 21:26:44 +00:00
Felix Fietkau f6f55bae7d swconfig: add a generic method for setting the port primary vlan id (used for transparently fixing up pvid for untagged port when setting vlan ports)
SVN-Revision: 15307
2009-04-20 21:26:39 +00:00
Felix Fietkau 4320a28228 add IC+ IP175C driver (based on Patrick Horn's driver, see #4050)
SVN-Revision: 15305
2009-04-20 18:57:55 +00:00
Felix Fietkau 787e9fcf93 swconfig: treat struct switch_attr as constant
SVN-Revision: 15302
2009-04-20 18:57:36 +00:00
Felix Fietkau cd80e16a80 swconfig: remove old debugging stuff
SVN-Revision: 15301
2009-04-20 18:57:30 +00:00
Felix Fietkau 1929c7511c mvswitch: re-enable header mode
SVN-Revision: 15186
2009-04-10 11:33:49 +00:00
Felix Fietkau bfa8064ccd atheros: in later kernels, vlan 0 no longer works as expected, switch to (1,2) instead of (0,1) for lan/wan
SVN-Revision: 14981
2009-03-22 20:19:23 +00:00
Felix Fietkau f972eb41b5 mvswitch,adm6996: use phy fixups instead of a nonstandard patch for hardware detection
SVN-Revision: 14977
2009-03-22 20:18:36 +00:00
Gabor Juhos 404fa66215 generic-2.6: make MyLoader parser compatible with the old partition tables
SVN-Revision: 14155
2009-01-23 11:54:44 +00:00
Gabor Juhos 442db57b96 move MyLoader partition parser into generic files, will be used on ar71xx
SVN-Revision: 13256
2008-11-17 10:14:58 +00:00
Felix Fietkau d1b986bd54 improve routing/nat performance for devices using the marvell 88e6060 switch
SVN-Revision: 13060
2008-10-28 17:54:22 +00:00
Felix Fietkau 1e570a9288 change the way ./files* and the generic kernel files are applied. ./files now applies to *ALL* kernel versions, and is copied along with ./files-* - this gets rid of quite a bit of redundancy in the extra kernel drivers.
SVN-Revision: 13010
2008-10-18 21:43:30 +00:00
Gabor Juhos 5d46bb5efc make gpio_dev compatible with GPIOLIB & GPIO_SYSFS (closes #4016)
SVN-Revision: 12864
2008-10-05 13:08:12 +00:00
Gabor Juhos 3527e7a649 modules/gpio_dev: move to drivers/char/ on older kernels as well, and create a package for it
SVN-Revision: 12133
2008-08-05 09:52:23 +00:00
John Crispin a641792a78 makes ledtrignetdev work on .26 and fix whitespaces
SVN-Revision: 12090
2008-08-04 14:05:04 +00:00
Felix Fietkau c7150f281c add missing defines for mvswitch
SVN-Revision: 11895
2008-07-21 18:12:38 +00:00
Felix Fietkau 3ad51a1c33 some more mvswitch fixes: - initialize the vlan destination map properly - workaround for moving node bug: clear the ATU database on every PHY poll
SVN-Revision: 11881
2008-07-19 23:09:56 +00:00
Felix Fietkau 87e673487a add extra safety for the packet mangling in the mvswitch driver
SVN-Revision: 11880
2008-07-19 23:09:43 +00:00
Felix Fietkau b014357704 set marvell switch ATU ageing time to minimum instead of maximum - hopefully fixes some fonera 2.0 ethernet issues
SVN-Revision: 11410
2008-06-09 10:31:46 +00:00
Peter Denison 3b7d3cf074 Remove bogus zero-length ohci-ssb.c in generic-2.6/files
SVN-Revision: 11190
2008-05-18 20:55:06 +00:00
Felix Fietkau 9e0ee80132 enable a different pseudo-vlan mode in the marvell switch (uses a proprietary header instead of a proprietary trailer) - fixes some mtu issues
SVN-Revision: 10975
2008-04-29 12:55:44 +00:00
Felix Fietkau c3fcb26d47 allow bigger packets in the marvell switch (does not fix the mtu problems yet)
SVN-Revision: 10970
2008-04-28 21:59:06 +00:00
Felix Fietkau 86bbc820d5 fix vlan mapping for cpu port on the marvell switch
SVN-Revision: 10934
2008-04-24 01:09:47 +00:00
Felix Fietkau 69999abeda clear VLANTunnel bit on the marvell switch ports - should help with some bridging issues
SVN-Revision: 10931
2008-04-23 16:28:05 +00:00
Felix Fietkau 11d94ce083 Add support for the ultra-crappy Marvell 88E6060, which is used in Fonera+ and the upcoming Fonera 2.0
SVN-Revision: 10876
2008-04-20 08:29:01 +00:00
Felix Fietkau a323a7bf2a Add stub driver for ADM6996F switches (configured through MII) The driver currently uses a hardcoded VLAN mapping and has no configuration yet Tested on Accton MR3202a
SVN-Revision: 10869
2008-04-20 02:53:04 +00:00
Gabor Juhos 67fd9d7fba move spi_gpio driver into the kernel, clean-up SPI modules
SVN-Revision: 10844
2008-04-15 07:33:43 +00:00
Gabor Juhos 832ba73685 modules/gpio-buttons: fix build error on older kernels
SVN-Revision: 10771
2008-04-08 11:49:22 +00:00
Michael Büsch 2e8af76a60 ssb-mips: Fix IRQ routing on the MIPS core.
SVN-Revision: 10770
2008-04-08 09:15:53 +00:00
Gabor Juhos 5798590c7c add a polled GPIO buttons input driver
SVN-Revision: 10766
2008-04-07 19:54:44 +00:00
Michael Büsch 68523387b3 GPIODEV: Fix open-count race condition.
SVN-Revision: 10625
2008-03-19 11:32:08 +00:00
John Crispin 9e6b3d16de add new led trigger for network traffic, fixes #2776
SVN-Revision: 10566
2008-03-07 21:25:02 +00:00
Michael Büsch c57ca284ce ssb: Update to latest upstream version of ssb.
SVN-Revision: 10490
2008-02-19 01:24:18 +00:00
Michael Büsch 670b7ab883 b43: Make probing of NPHY devices possible.
SVN-Revision: 10487
2008-02-18 22:21:29 +00:00
Felix Fietkau a2ba826425 "default-on" LED Trigger
The current LED subsystem always initialises LEDs in the OFF state. This is fine for most LEDs but some should be on right from boot (e.g. POWER LED). Following some discussion with the LED subsystem maintainers, a trigger was recommended as the best way to implement this functionality.

Here is a patch to add a new trigger "default-on" which will initialise an LED in the ON state. It is not compiled by default.

Particular thanks to Rod Whitby for all his help with this.

Signed-off-by: Nick Forbes <nick.forbes@incepta.com>

SVN-Revision: 10348
2008-02-02 01:21:54 +00:00
John Crispin 8f39c35159 add userspace tool for gpio_dev
SVN-Revision: 10267
2008-01-26 04:24:05 +00:00
John Crispin 2a8b143cb3 remove binary file
SVN-Revision: 10262
2008-01-26 03:17:35 +00:00
John Crispin 0844d5fe49 add generic gpio char dev for CONFIG_GENERIC_GPIO archs
SVN-Revision: 10261
2008-01-26 03:16:11 +00:00
Felix Fietkau 985ee9fc8f LED driver for PCEngines ALIX boards
This patch adds a driver for the three LEDs that exists on the
PCEngines ALIX 2 and 3 series boards.

The driver is also added to the Alix profile.

Signed-off-by: Petr Liebman <petrliebman@gmail.com>

--

SVN-Revision: 9748
2007-12-14 00:52:15 +00:00
Florian Fainelli a86b7992f9 Forgot removing that file while applying patch from #2757
SVN-Revision: 9690
2007-12-09 17:52:27 +00:00
Gabor Juhos ab8a75d73f make morse LED trigger available as a package, and fix it to compile with 2.6.23
SVN-Revision: 9363
2007-10-20 14:32:13 +00:00
Felix Fietkau fd811bf54c sync ssb with upstream
SVN-Revision: 9302
2007-10-14 02:47:36 +00:00
Felix Fietkau ceb5350cd3 back out change to generic-2.6/files/ and update 310-ssb_pcicore_fixes.patch for 2.6.23
SVN-Revision: 9281
2007-10-13 02:21:24 +00:00
Felix Fietkau 30777ac989 add patches for 2.6.23 on brcm47xx (not enabled yet)
SVN-Revision: 9279
2007-10-13 02:04:37 +00:00