80a54ef804
fstools: update to latest git HEAD
...
this adds support for overlayfs v23
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42890
2014-10-13 19:41:16 +00:00
4c490c79b2
procd: fix initial nand sysupgrade
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42884
2014-10-12 15:50:15 +00:00
41363b1ecb
procd: fix parsing of the has_env parameter
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42883
2014-10-12 15:50:01 +00:00
2e9157a866
mac80211: remove NO-IR from channel 36-48
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42882
2014-10-12 15:49:38 +00:00
9106cc0af9
netifd: Make mtu configurable of dynamic 6rd tunnel interface
...
Patch allows to configure the mtu of the dynamic 6rd tunnel interface when created by dhcp script.
In some setups it's desirable to have config control over the 6rd tunnel mtu to maximize the traffic throughput
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 42871
2014-10-12 12:27:21 +00:00
1db4cb9c92
odhcp6c: fix parse errors with some dhcpv6 servers
...
SVN-Revision: 42869
2014-10-12 12:18:33 +00:00
51a5ff0947
comgt: add ncm proto support
...
This will not work for all board/dongle combinations until we hit 3.17.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 42866
2014-10-10 08:56:33 +00:00
fbe1b7ecdf
mac80211: remove error from detect script
...
Signed-off-by: Michel Stam <m.stam@fugro.nl>
SVN-Revision: 42861
2014-10-09 09:04:24 +00:00
aad6cb99cf
ppp: add unconditional autoipv6-trigger
...
SVN-Revision: 42860
2014-10-09 07:38:25 +00:00
3f700643fa
ppp: remove ugly ipv6-workaround
...
This is not needed after all:
Omitting option ipv6 or setting it to 'auto' will
fire up a dhcpv6 subprotocol (this was added).
Setting ipv6 to 1 will only cause the IPv6 link to
be brought up and an accompanying dhcpv6 or static
interface with ifname @wan can be used to configure addresses.
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42859
2014-10-09 07:35:28 +00:00
b2d099c11c
dropbear: ensure the interface has an ip-address
...
Use network_get_ipaddrs_all to get all ip-addresses of an interface. If the
function fails, the interface does not exists or has not any suiteable ip
addresses assigned.
Use the returned ip-address(es) to construct the dropbear listen address.
Signed-off-by: Mathias Kresin <openwrt@kresin.me>
SVN-Revision: 42857
2014-10-09 07:16:35 +00:00
14e6559eee
base-files: add network_get_ipaddrs_all()
...
Return all IPv4 and IPv6 addresses.
Signed-off-by: Mathias Kresin <openwrt@kresin.me>
SVN-Revision: 42856
2014-10-09 07:16:29 +00:00
c62b07b2ce
ppp: allow auto-detecting and creation of ipv6 subinterface
...
this makes ipv6 with ppp a bit more comfortable
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42854
2014-10-08 20:37:15 +00:00
ea0a01d7e2
odhcp6c: fix typo in last commit
...
SVN-Revision: 42852
2014-10-08 15:27:17 +00:00
c7a941cf02
odhcp6c: don't assign addresses or prefixes prematurely
...
SVN-Revision: 42850
2014-10-08 15:16:19 +00:00
8609ca69e0
mac80211: add a few upstream ath9k / mac80211 fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42849
2014-10-08 15:09:53 +00:00
c118e5edf4
network: Unbind DHCPv6 from underlying interfaces
...
This allows IPv6 to set up without IPv4 being up thus
IPv6-only or IPv6+DS-Lite working with the default config.
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42848
2014-10-08 13:08:05 +00:00
5fa47c3c04
odhcp6c: ensure signal-safety of signal handlers
...
SVN-Revision: 42841
2014-10-08 09:58:40 +00:00
344a304524
lldp: make use of new USERID syntax
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42839
2014-10-08 08:01:33 +00:00
a3bf98495a
base-files: extend USERID:=syntax
...
it is now possible to inlie the uid and gid in the syntax
USERID:=username=uid:group=gid:group2=gid2:...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42838
2014-10-08 08:01:28 +00:00
90120bb771
wwan: add a generic 3g/4g proto
...
this proto handler will detect which of 3g, qmi, mbim, ncm or directip you need
for a stick and setup uci automagically
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42837
2014-10-08 08:01:20 +00:00
1df98fcd5a
comgt: split directip support into its own package
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42836
2014-10-08 08:00:55 +00:00
bb64826bdb
uqmi: dont use proto_block_restart
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42835
2014-10-08 08:00:45 +00:00
e53734ddef
uqmi: make the proto depend on the usb driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42834
2014-10-08 08:00:21 +00:00
87edc29ea1
umbim: dont use proto_block_restart
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42833
2014-10-08 08:00:17 +00:00
2fa06954a3
umbim: work out the ifname instead of relying on it being in uci
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42832
2014-10-08 08:00:07 +00:00
e28c5f86f3
procd: handle hotplug events for the usbmisc subsystem
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42831
2014-10-08 08:00:01 +00:00
550ded7b8a
procd: r42814 added a bad git version
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42826
2014-10-06 20:27:31 +00:00
9f2a5ace84
procd: update to latest git HEAD
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42814
2014-10-06 20:06:41 +00:00
c53de497f8
ubox: update to latest git head
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42813
2014-10-06 20:06:26 +00:00
635c9d7a25
fstools: update to latest git
...
adds support for /dev/vd* virtual io
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42812
2014-10-06 20:06:15 +00:00
8691d75917
odhcp6c: add route-workaround for broken IPv6-ISPs
...
Some ISP seem to only do stateful DHCPv6 and not sending RAs.
This is technically broken because plain DHCPv6 doesn't carry routes.
We work around here by faking a default route to the DHCPv6 server
if we do not receive a useful RA from the ISP.
This workaround can be turned off with: option fakeroutes 0
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42803
2014-10-06 11:19:33 +00:00
8243e57167
nftables: bump to 2014-09-30, disable gmp
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42802
2014-10-06 06:24:53 +00:00
f9cccd2c14
base-files: make postinst script run inside a subshell
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42800
2014-10-06 05:55:35 +00:00
e263cd27ee
libnftnl: bump to 2014-10-02
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42799
2014-10-06 05:30:36 +00:00
74397a14ca
iwinfo: add AR9580 with new subsystem device ID and QCA9880 with no subsystem vendor/device IDs
...
The AR9580 with the new ID can be found in the EnGenius ESR900 and the
QCA9880 without any subsystem IDs can be found in the EnGenius ESR1750.
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
SVN-Revision: 42793
2014-10-06 04:53:04 +00:00
9f08790436
kernel: add rtc-ds1307 module support
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 42791
2014-10-06 04:52:51 +00:00
fcbad42acd
kernel: add ledtrig-transient module support
...
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 42790
2014-10-06 04:52:44 +00:00
70d56d749b
hostapd: read missing parameter for dynamic VLANs
...
In r41872 Dynamic VLAN support was reintroduced, but the vlan_naming
parameter is not read while setting up the config, so it always
defaults to 1.
Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>
SVN-Revision: 42787
2014-10-06 04:52:21 +00:00
7860c9707a
sysupgrade: preserve symlinks in backups
...
Signed-off-by: Catalin Patulea <catalinp@google.com>
SVN-Revision: 42783
2014-10-06 04:51:56 +00:00
8a450a93a5
lantiq: remove the useless ltqtapi.mk include file
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42778
2014-10-05 18:58:47 +00:00
5121981a9e
iproute2: add conflict for ip with ip-full
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42774
2014-10-05 17:13:34 +00:00
bf0305725a
hostapd: add conflicts with wpad(-mini) to hostapd and wpa_supplicant
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42772
2014-10-05 16:41:50 +00:00
8cc9f46dfa
ath10k: update firmware to the latest version
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42768
2014-10-05 14:59:59 +00:00
063074cf0c
mac80211_hwsim: select 802.11n support for hostapd
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42766
2014-10-05 11:50:42 +00:00
62e6e788dd
relayd: update to the latest version, fixes a build error with the new gcc ( #18010 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42765
2014-10-05 11:01:49 +00:00
281f40cef2
hostapd: allow using iapp for any encryption type ( fixes #18022 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42764
2014-10-05 10:55:55 +00:00
cd80931e03
hostapd: merge an upstream patch for pmksa cache
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42762
2014-10-05 10:26:26 +00:00
b5529ed26b
iwinfo: detect AC PHY for broadcom-wl
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42761
2014-10-05 10:26:17 +00:00
dac05f6724
iwinfo: detect HT PHY for broadcom-wl
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42760
2014-10-05 10:26:10 +00:00
John Crispin
Felix Fietkau
Steven Barth