601bc28669
clean up modules.mk
...
SVN-Revision: 34697
2012-12-15 02:00:55 +00:00
2c33df0376
add devicetrees
...
SVN-Revision: 34691
2012-12-15 02:00:20 +00:00
3a948770cf
add linux-v3.7
...
SVN-Revision: 34687
2012-12-15 01:59:45 +00:00
d8678644f9
make rtl8366 driver OF capable
...
SVN-Revision: 34682
2012-12-15 01:59:08 +00:00
4901ac8225
brcm47xx: improve suppressing printing if a module was found in preinit function.
...
Thank you Bastian Bittorf
SVN-Revision: 34680
2012-12-14 22:45:12 +00:00
57d7df3a35
generic: export include/linux/switch.h on 3.3, 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34678
2012-12-14 12:11:48 +00:00
a860153cce
generic: disintegrate UAPI from include/linux/switch.h
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34677
2012-12-14 12:11:41 +00:00
8aed692309
generic: refresh patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34676
2012-12-14 08:47:39 +00:00
272ef8ac00
generic: update pci_disable_usb_common_quirks patch
...
Fixes the following compiler warning:
drivers/usb/host/pci-quirks.c:459:23: warning: 'quirk_usb_handoff_uhci' defined but not used [-Wunused-function]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34675
2012-12-14 08:32:56 +00:00
2e2c88b625
ar71xx: reorder some patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34674
2012-12-14 07:16:56 +00:00
34411a0cbd
ar71xx: merge unifi outdoor patch into the ubnt-xm one
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34673
2012-12-14 07:16:50 +00:00
6c8efbfdc0
brcm47xx: Additional BCM4716 support
...
Additional BCM4716 support. Still needs working ethernet driver.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34672
2012-12-13 18:57:38 +00:00
6672d869da
brcm47xx: BCMA - Broadcom 2011 SDK Updates
...
I noticed these changes when reviewing the 2011 Broadcom SDK. I haven't
noticed any obvious changes in behavior with them applied; but thought I
should at least pass them on.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34670
2012-12-13 18:54:04 +00:00
97d22306da
brcm47xx: return the real irq number in bcma_core_irq
...
The irq signal numbers that are send by the cpu are increased by 2 from
the number programmed into the mips core by bcma.
Return the irq number on which the irqs are send in bcma_core_irq() now.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34669
2012-12-13 18:51:10 +00:00
6e4082f170
kernel: fix solos-pci skb double-free in DMA mode
...
[juhosg: refresh the patches with quilt]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34667
2012-12-13 18:39:31 +00:00
321852348f
kernel: fix perf build with uclibc toolchains on x86
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34666
2012-12-13 17:34:22 +00:00
5e7d69554e
kernel/3.6: backport an upstream build for perf with uClibc
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34662
2012-12-13 15:40:27 +00:00
2bb7f82d8a
kernel: fix porting mistakes on the 3.6+ SIP NAT patch causing crashes
...
SVN-Revision: 34657
2012-12-13 13:07:13 +00:00
71712ec522
brcm47xx: this usb patch is not needed, the Broadcom SDK does it the other way.
...
SVN-Revision: 34655
2012-12-13 00:12:42 +00:00
5be97468f6
brcm47xx: use kernel 3.6.10 by default now
...
SVN-Revision: 34654
2012-12-13 00:11:55 +00:00
235c065e12
brcm47xx: suppress printing if a module was found in preinit function.
...
SVN-Revision: 34653
2012-12-13 00:11:11 +00:00
3a4a6cfd64
kernel: in kernel 3.6.8 and later tg3 depends on hwmon.ko
...
SVN-Revision: 34652
2012-12-13 00:09:55 +00:00
1bd8db0bd6
kernel: update bcma and ssb to master-2012-12-11-2 from wireless-testing
...
SVN-Revision: 34651
2012-12-12 22:42:18 +00:00
d085aad288
ar71xx: add profile and build initramfs image for the WNDR4300
...
It is not yet possible to use the default squasfsh/jffs2 images
on NAND flashes, so only initramfs image is supported for now.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34650
2012-12-12 16:49:52 +00:00
dcdfcb75f0
ar71xx: add user-space support for the NETGEAR WNDR4300
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34649
2012-12-12 16:49:51 +00:00
bc82db7d78
ar71xx: add kernel support for the NETGEAR WNDR4300
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34647
2012-12-12 16:49:49 +00:00
75b71f4a74
ar71xx: add ap91_pci_init_simple helper
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34646
2012-12-12 16:49:48 +00:00
d7cebac243
ar71xx: add ath79_wmac_register_simple helper
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34645
2012-12-12 16:49:47 +00:00
ec26814b0e
ar71xx: refresh 3.3 patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34644
2012-12-12 16:49:46 +00:00
cdfc300948
ar71xx: remove superfluous USB patches for 3.3
...
SVN-Revision: 34643
2012-12-12 16:49:43 +00:00
eece71be56
generic: fix 8139cp patch for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34640
2012-12-12 08:37:27 +00:00
2b378d11c8
kernel: update linux 3.6 to 3.6.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34639
2012-12-11 20:14:39 +00:00
ed15c452a1
kernel: update to 3.7 final
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34626
2012-12-11 11:31:17 +00:00
aa2dc106c6
switch to 3.6 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34623
2012-12-10 21:06:10 +00:00
ff6116cbdf
add 3.6 kernel support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34622
2012-12-10 21:06:05 +00:00
17c76e5ca8
add sound feature
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34621
2012-12-10 21:05:48 +00:00
cbfca35c76
generic: backport a fix for the input keymap-matrix module
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34620
2012-12-10 21:05:42 +00:00
87c8808ca5
keyboard driver depends on input-matrixkmap for 3.6+
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34619
2012-12-10 21:05:36 +00:00
5c28c5255f
generic: backport an upstream fix for building snd-soc-pcm as a module
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34617
2012-12-10 21:05:27 +00:00
f016b935d3
also list kmod-sound-core in the default packages
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34615
2012-12-10 21:05:11 +00:00
dfd718d13d
mac80211: ath9k: allow to load EEPROM data via firmware API
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34606
2012-12-10 15:46:15 +00:00
374a72411a
generic/kernel: add a fix for a common MIPS build failure.
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34602
2012-12-10 15:04:10 +00:00
c1c6a23f13
kernel/generic: refresh 3.7 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34601
2012-12-10 15:03:55 +00:00
0f90806014
kernel/generic: port r34599 over 3.7 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34600
2012-12-10 15:03:51 +00:00
67e85c0018
kernel/generic: fix build failure on missing uhci symbol
...
linux-3.6.8/drivers/usb/host/pci-quirks.c:471: undefined reference to
`uhci_check_and_reset_hc'
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34599
2012-12-10 14:24:28 +00:00
c2ae0ec02a
add support for Hauppauge Broadway
...
This patch introduces OpenWRT support for the base Hauppauge/PCTV Broadway
platform. It doesn't deal with the TV tuner or transcoder at this point,
but the core functionality is working (Ethernet, wireless, USB, buttons,
LEDs, etc).
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
SVN-Revision: 34595
2012-12-10 14:13:01 +00:00
3cbc1a49e2
ar71xx: load ar934x_nfc driver earlier
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34589
2012-12-10 10:38:11 +00:00
1f7ae58a2c
ar71xx: ar934x_nfc: allow to control DMA data swap via platform data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34588
2012-12-10 10:38:07 +00:00
2581173660
kernel: update linux 3.6 to 3.6.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34578
2012-12-08 15:01:33 +00:00
47f9b2a110
ar71xx: TP-LINK also has a family TL-WDR
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34577
2012-12-07 19:10:57 +00:00
d7ba2b4840
ar71xx: add profile and build image for TP-LINK TL-WA801N/ND
...
Patch-by: Amir Sagie <openwrt-devel@taproot.org.il>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34576
2012-12-07 19:10:56 +00:00
deeeb5f671
create Linksys WRTU54G-TM profile
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34572
2012-12-07 18:02:31 +00:00
33f6c5ddb9
kernel: add missing USB configuration symbols after r34501
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34568
2012-12-07 11:01:53 +00:00
8236584b13
rename interrupt number constants
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34566
2012-12-06 22:41:14 +00:00
f1e4da0389
remove the now deprecated /proc/adm8668 interface
...
Proper gpiolib support is hooked instead.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34565
2012-12-06 22:41:09 +00:00
849662a8ec
add a gpiolib driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34564
2012-12-06 22:41:04 +00:00
78b235cfc3
do not reset WAN and LAN blocks
...
This is taken care of by the tulip driver accordingly.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34563
2012-12-06 22:40:58 +00:00
b3f36553cc
enable and advertise USB support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34562
2012-12-06 22:40:54 +00:00
a5aed4ec3a
add support for on-board EHCI controller
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34561
2012-12-06 22:40:49 +00:00
88f6bf64cf
remove the "old" tulip forked driver
...
We can now use the mainline tulip driver.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34559
2012-12-06 22:40:40 +00:00
40ab1facd2
use the tulip platform driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34558
2012-12-06 22:40:36 +00:00
445e77fdb5
patch the tulip driver to accept a platform variant
...
Isolate the PCI specific parts and group them under CONFIG_TULIP_PCI
CONFIG_TULIP_PLATFORM can be enabled for a platform style Tulip driver.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34557
2012-12-06 22:40:31 +00:00
b1f1381c27
move clock frequencies into clock driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34556
2012-12-06 22:40:26 +00:00
60663b12b2
add CONFIG_GPIO_PL061 config symbol
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34555
2012-12-06 22:40:21 +00:00
1232f91efb
replace the custom mtd driver with a partition parser
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34554
2012-12-06 22:40:17 +00:00
b516c8d89d
cleanup PCI controller code
...
At some point we should make the ADM5120 PCI controller driver a real
platform driver and share that one between the two targets.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34553
2012-12-06 22:40:12 +00:00
1ed763b888
cleanup and make interrupt code more robust
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34552
2012-12-06 22:40:02 +00:00
47ccbaaa91
remove frequency from /proc/cpuinfo
...
This is not the place to expose it and duplicates code reading the
system frequency.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34551
2012-12-06 22:39:57 +00:00
e37f6fb458
provide a system clock to be used by the MIPS timer
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34550
2012-12-06 22:39:52 +00:00
79c2ce01b7
get rid of the UART defines
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34549
2012-12-06 22:39:47 +00:00
afc2b07be1
get rid of the specific UART driver and use AMBA PL010
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34548
2012-12-06 22:39:43 +00:00
2dee2133c5
implement early_printk without an early_console
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34547
2012-12-06 22:39:33 +00:00
f85115efd8
simplify IRQ controller code
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34546
2012-12-06 22:39:27 +00:00
50303d52e2
use platform_add_devices
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34545
2012-12-06 22:39:22 +00:00
192c1e90bc
move time related functions to their own file
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34544
2012-12-06 22:39:18 +00:00
1f939889ca
move setup-related functions to their own file
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34543
2012-12-06 22:39:08 +00:00
abc03de599
kernel: add missing config symbols
...
SVN-Revision: 34532
2012-12-06 14:11:16 +00:00
a3843e7ec7
kernel 3.6+: nuke obsolete patches that are messing up oprofile builds
...
SVN-Revision: 34506
2012-12-05 16:49:48 +00:00
512baafc6b
kernel/3.3: move OHCI and EHCI platform drivers to generic
...
These patches are not specific to bcm47xx and will be used on other
platforms as well.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34501
2012-12-05 14:18:05 +00:00
822ee5053e
cns3xxx: fix dwc_otg driver compat with udc-core
...
function. This removes those from the dwc_otg driver and removes the patch
that comments out the linkage of udc-core so that the dwc_otg driver can
co-exist happily with other USB Device Controllers.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34475
2012-12-04 16:19:18 +00:00
fd0729f35c
cns3xxx: advertise pcie usb usbgadget features
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34474
2012-12-04 16:19:12 +00:00
d9d0814fc2
Fix Comtrend AR-5381u Power LED
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34471
2012-12-04 15:19:50 +00:00
d3cda51994
do no longer rename amba-pl010 serial devices names
...
Back in the days when we could not override /etc/inittab, it made a lot
of sense to rename ttyAM to ttyS since this was the only supported
serial device(s), we can now just put in an appropriate /etc/inittab file
now.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34469
2012-12-03 16:18:40 +00:00
a7220cd9f8
kernel: disable more pci quirks to save space on platforms that don't need them
...
SVN-Revision: 34467
2012-12-03 10:33:47 +00:00
ec885796c0
kernel 3.6+: switch to a crc32 implementation that is more suitable for small caches. reduces kernel image size by ~22 KiB on mips
...
SVN-Revision: 34461
2012-12-02 18:37:41 +00:00
24b31c9428
kernel: fix stripping symbol exports
...
SVN-Revision: 34458
2012-12-02 17:42:17 +00:00
2ac9ac5163
brcm47xx: read sprom vars without prefix for boardrev and boardtype if the prefixed one is not available.
...
SVN-Revision: 34454
2012-12-02 16:11:39 +00:00
38d3b8d0ea
kernel: patch in a working copy of elf.h instead of using relative path based hackery in #include statements
...
SVN-Revision: 34449
2012-12-02 15:26:19 +00:00
e0e43655ce
ramips: fix serial console for Belkin F5D8235 v1/v2
...
Based on a patch from #12533 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34445
2012-12-02 14:16:12 +00:00
890f83dfb3
Update linux-atm fixes to reflect the final upstream pull request
...
[juhosg: refresh the patches with quilt]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34443
2012-12-02 13:04:04 +00:00
527afd0e9a
remove target
...
This target is unused, does not support any off the shelf hardware and
has been a maintenance burden for quite some time now.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34430
2012-11-30 10:53:47 +00:00
c830644d97
remove Linux 3.3 support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34426
2012-11-29 21:43:02 +00:00
763f780553
use a default kernel command-line to mount squashfs and jffs2
...
This fixes bug #9055 .
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34424
2012-11-29 21:42:53 +00:00
7cde0281f4
kernel: Fix 8139cp ring buffer initialisation, tx timeout recovery, add BQL
...
Patches queued upstream in net-next.git
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34415
2012-11-29 17:58:28 +00:00
4f5defdc3b
ar71xx: switch to 3.6.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34414
2012-11-29 17:53:42 +00:00
ea17e36482
kernel: Update Geos to 3.6.8
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34411
2012-11-29 17:37:19 +00:00
543c2c27d1
kernel: Add ATM fixes pending upstream merge (queue reduction, race fixes)
...
Patches about to go into net-next.git
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34410
2012-11-29 17:37:18 +00:00
df6727639a
kernel: Add missing CONFIG_BATTERY_DS2781 option to generic 3.6 config
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34409
2012-11-29 17:37:16 +00:00
44131bd785
ramips: rt305x: add profile and build image for the Asus RT-N13U
...
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34407
2012-11-29 17:37:14 +00:00
d3994b7408
ramips: rt305x: add user-space support for the Asus RT-N13U
...
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34406
2012-11-29 17:37:13 +00:00
0ec59e6235
ramips: rt305x: add kernel support for the Asus RT-N13U Wireless-N300 Router
...
The work has been backported from openwrt-dreambox with
some modifications & code cleanup.
* updated config-3.3
* updated config-3.6
* renamed rt-n13 to rt-n13u
* fixed mach-rt-n13u.c
[juhosg: move user-space support and image generation into separate
patches]
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34405
2012-11-29 17:37:11 +00:00
c2f018fca2
remove common symbols from 3.6 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34404
2012-11-29 15:21:41 +00:00
1f516235ea
remove common symbols from 3.3 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
3a4d0ebd5c
kernel: update linux 3.6 to 3.6.8
...
Also refresh the affected patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34402
2012-11-29 07:42:19 +00:00
ee16e144bb
use physmap-flash part_probe_types
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34398
2012-11-27 18:42:49 +00:00
0588d13a3e
Fix typo in 96338GW power LED.
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34396
2012-11-27 18:42:42 +00:00
dd852e242d
add AudioCodes AC495 SoC
...
Found in the AudioCodes Tulip AC494 ATA.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34395
2012-11-27 18:42:39 +00:00
d59ba20030
do not call clk_put() on the timer clock
...
We don't support disabling the clock, but this is actually what it would do.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34394
2012-11-27 18:42:36 +00:00
5d6208f34d
do not list specific board compatible strings
...
The general practice is to use the general SoC compatible string in both the
DTS and the board specific .c file.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34393
2012-11-27 18:42:32 +00:00
94b7be6dd7
remove unused variables from Makefile.boot
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34392
2012-11-27 18:42:28 +00:00
efd00e6240
brcm47xx: fix title of Bcm4705-wl profile
...
SVN-Revision: 34378
2012-11-25 16:41:00 +00:00
a3d976aff5
brcm47xx: add profile for bcm4705 with wl driver
...
SVN-Revision: 34336
2012-11-25 16:15:27 +00:00
57b7879a4e
ramips: ramips_eth: use Kconfig definition to enable debug
...
The Kconfig identifier to enable debugging in the driver was different from the
actually used one. Fix that.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34332
2012-11-25 14:25:54 +00:00
21d5df8700
ramips: add DIR-615 D userspace support
...
Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and
Makefile changes to build images for this target. However, without the userspace
bits a ramips machine can't use wifi as the necessary "eeprom" data is to be
extracted by a hotplug script; also, sysupgrade support and default led
configuration are missing.
An IRC user reported these changes allowed him to use wifi on his hardware.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34331
2012-11-25 14:25:27 +00:00
608efcdbd0
kernel: add CONFIG_BCMA_POSSIBLE=y to generic config as it is set in most of the target configs.
...
SVN-Revision: 34330
2012-11-25 14:14:17 +00:00
aa8e887a46
brcm47xx: whitespace cleanups
...
SVN-Revision: 34329
2012-11-25 14:03:51 +00:00
be77f9951c
brcm47xx: fix cpu clock detection on ASUS WL-520gU
...
The ASUS WL-520gU and some other similar Asus devices have a BCM5354
running at 200MHZ and not at 240 which is the default for this SoC.
This fixes #4083 .
SVN-Revision: 34325
2012-11-24 20:28:06 +00:00
264873b3c5
brcm47xx: watchdog: deactivate NOWAYOUT.
...
In the old configuration the SoC issued a reboot if the watchdog was
killed also if it was kill with TERM and not KILL.
This will fix #11724 .
SVN-Revision: 34324
2012-11-24 20:24:27 +00:00
c62d86ecb8
brcm47xx: update watchdog driver
...
This watchdog driver should work with SoC having a PMU.
This fixes #11720 .
SVN-Revision: 34323
2012-11-24 20:07:25 +00:00
60e0e0d6e6
bcm63xx: Add a fixup for rt2x00 devices.
...
This patch adds support for defining rt2x00 eeprom data.
This eeprom data can be extracted from flash or loaded directly from a firmware file.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34322
2012-11-24 14:19:22 +00:00
746b4cec06
bcm63xx: Enable LED pin support for ath9k pci fixup.
...
Some boards need specifying LED pin in order to get it working.
For example, in board HW556 (Huawei HG556a) "led_pin" must be "2".
By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1".
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34321
2012-11-24 14:19:16 +00:00
1baeede939
bcm63xx: fix spi transfer handling
...
* Accept transfers without bits_per_word set.
* Work around the inability of the hardware of keeping CS asserted.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 34320
2012-11-24 14:19:09 +00:00
b0b994cf76
ar71xx: set pad6 cfg for AR8327 on the AP136 board
...
Also override the pll_1000 value. Without these settings
ethernet suffers from packet loss.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34316
2012-11-23 20:55:34 +00:00
49d4b5581d
generic: ar8216: set delay values for SGMII mode on AR8327
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34315
2012-11-23 20:55:26 +00:00
3205b52d1c
generic: ar8216: introduce ar8216_mib_op helper
...
The ar8216_mib_{capture,flush} functions are similar.
Move the common code into a helper and use that from
the original functions.
This change also fixes a lockdep warning in
ar8216_mib_flush.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34297
2012-11-22 10:33:03 +00:00
10d30f2d2d
swconfig: make it compatible with 3.7
...
swconfig does not compile with 3.7 because
struct netlink_notify->pid has been renamed to
struct netlink_notify->portid
and
struct genl_info->snd_pid has been renamed to
struct genl_info->snd_portid
Use the new names and add compatibility patches
to 3.3 and 3.6.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34288
2012-11-21 17:38:11 +00:00
f7ead0a2d5
adds proper package selection for dgn3500
...
SVN-Revision: 34286
2012-11-21 06:06:48 +00:00
e20a0baa04
cns21xx: add support for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34285
2012-11-20 21:37:53 +00:00
5c740aa23c
generic: add some missing symbols for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34284
2012-11-20 21:34:43 +00:00
2a792f32b5
generic: ar8216: fix port number check in 'ar8xxx_mib_work_func'
...
Also add a WARN_ON to 'ar8216_mib_fetch_port_stat'
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34283
2012-11-20 20:40:04 +00:00
258b2f2dc2
generic: ar8216: remove an unblanced mutex_unlock call
...
Fixes the following warning:
[ 94.080000]
[ 94.080000] =====================================
[ 94.080000] [ BUG: bad unlock balance detected! ]
[ 94.080000] 3.3.8 #2 Tainted: G O
[ 94.080000] -------------------------------------
[ 94.080000] swconfig/1220 is trying to release lock (&priv->mib_lock) at:
[ 94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c
[ 94.080000] but there are no more locks to release!
[ 94.080000]
[ 94.080000] other info that might help us debug this:
[ 94.080000] 2 locks held by swconfig/1220:
[ 94.080000] #0 : (genl_mutex){+.+...}, at: [<80222430>] genl_rcv+0x14/0x34
[ 94.080000] #1 : (&dev->sw_mutex){+.+...}, at: [<801da018>] swconfig_get_dev+0x88/0xb4
[ 94.080000]
[ 94.080000] stack backtrace:
[ 94.080000] Call Trace:
[ 94.080000] [<8028dc58>] dump_stack+0x8/0x34
[ 94.080000] [<800a5128>] print_unlock_inbalance_bug+0xe0/0xfc
[ 94.080000] [<800a82c0>] lock_release+0x18c/0x1c8
[ 94.080000] [<80292074>] __mutex_unlock_slowpath+0xd8/0x17c
[ 94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c
[ 94.080000] [<801db688>] swconfig_get_attr+0xbc/0x394
[ 94.080000] [<8022261c>] genl_rcv_msg+0x1cc/0x214
[ 94.080000] [<80221a18>] netlink_rcv_skb+0x6c/0xe8
[ 94.080000] [<80222440>] genl_rcv+0x24/0x34
[ 94.080000] [<80221370>] netlink_unicast+0x15c/0x22c
[ 94.080000] [<8022175c>] netlink_sendmsg+0x240/0x2d0
[ 94.080000] [<801ef544>] sock_sendmsg+0x84/0x9c
[ 94.080000] [<801f0648>] __sys_sendmsg+0x1cc/0x270
[ 94.080000] [<801f207c>] sys_sendmsg+0x48/0x7c
[ 94.080000] [<8006ad78>] stack_done+0x20/0x40
[ 94.080000]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34282
2012-11-20 20:40:03 +00:00
82b57b0c28
generic: ar8216: add missing locking calls
...
Fixes the following lockdep warning:
[ 19.160000] ------------[ cut here ]------------
[ 19.160000] WARNING: at drivers/net/phy/ar8216.c:322 ar8216_rmw+0x54/0xa4()
[ 19.170000] Modules linked in: nf_defrag_ipv4 nf_conntrack ehci_hcd
sd_mod pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multip
ort xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp
x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) at
h9k_hw(O) ath(O) mac80211(O) usbcore usb_common scsi_mod nls_base crc7
crc_itu_t crc_ccitt cfg80211(O) compat(O) arc4 aes_generic cry
pto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer
ledtrig_default_on leds_gpio gpio_button_hotplug(O)
[ 19.210000] Call Trace:
[ 19.220000] [<8028dc38>] dump_stack+0x8/0x34
[ 19.220000] [<80072da0>] warn_slowpath_common+0x78/0xa4
[ 19.230000] [<80072de4>] warn_slowpath_null+0x18/0x24
[ 19.230000] [<801de820>] ar8216_rmw+0x54/0xa4
[ 19.240000] [<801df460>] ar8216_mib_capture+0x70/0xd0
[ 19.240000] [<801df944>] ar8xxx_mib_work_func+0x34/0x98
[ 19.250000] [<80089a7c>] process_one_work+0x28c/0x460
[ 19.250000] [<8008a630>] worker_thread+0x22c/0x334
[ 19.260000] [<8008e544>] kthread+0x88/0x90
[ 19.260000] [<80065020>] kernel_thread_helper+0x10/0x18
[ 19.270000]
[ 19.270000] ---[ end trace 22e9d696adfa6a08 ]---
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34281
2012-11-20 20:40:00 +00:00
c0f73ac607
generic: convert yaffs to use kuid_t and kgid_t on 3.6+
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34280
2012-11-20 17:45:24 +00:00
188908e885
ar71xx: make rb750_nand driver compatible with 3.7
...
Also add compatibility patches for the currently
supported kernels.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34279
2012-11-20 16:29:43 +00:00
8194237789
ar71xx: make ar934x_nfc driver compatible with 3.7
...
Also add compatibility patches for the currently
supported kernels.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34278
2012-11-20 16:29:42 +00:00
4468fd7ae4
ar71xx: refresh rb4xx_nand patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34277
2012-11-20 15:53:17 +00:00
46a3b818b9
ar71xx: remove buffer verification reference from rb4xx_nand.c
...
It is a dead code.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34276
2012-11-20 14:40:22 +00:00
674b91ce0e
ar71xx: fix GPIO function selection for AR934x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34275
2012-11-20 14:27:17 +00:00
d833ca527d
ar71xx: restore rb4xx kernel partition size to the original value
...
The new lzma compressed elf kernel image fits into
that, even on devices with large page NAND chips.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34274
2012-11-20 12:17:45 +00:00
33a99ce46b
ar71xx: install lzma compressed elf kernel image from wget2nand
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34273
2012-11-20 12:17:44 +00:00
68b5aa2fdf
ar71xx/image: provide lzma compressed elf kernel image
...
This will be used on the RB4xx/RB7xx/RB2011 boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34272
2012-11-20 12:17:43 +00:00
97867f8717
ar71xx/image: relink loader.elf image to LOADADDR
...
This allows to load the resulting image directly
from RouterBOOT.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34271
2012-11-20 12:17:41 +00:00
dd092fd10c
ramips: set clk_is_20mhz for rt2x00 on RT3352/RT5350
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34270
2012-11-20 07:19:10 +00:00
6c1fbb2d5c
mac80211/rt2x00: add rf_vals for Rt3352 with Xtal=20MHz
...
[juhosg: move ramips specific stuff into a followup patch]
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34269
2012-11-20 07:19:09 +00:00
8e4cefc7f8
refresh all kernel configurations
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34267
2012-11-20 07:19:06 +00:00
8dc72c5c4d
Revert "target specific patches have nothing to do in generic.."
...
This reverts commit r34230, as it is causing build failures:
make[3] -C package/mtd compile
imagetag.c:35:32: fatal error: linux/bcm963xx_tag.h: No such file or directory
compilation terminated.
make[4]: *** [imagetag.o] Error 1
Any patches modifying exported kernel headers need to reside in generic
as toolchain/kernel-headers only applies generic patches.
SVN-Revision: 34255
2012-11-19 12:38:26 +00:00
4c043300fc
fix 820-usb_add_usb_find_device_by_name.patch
...
SVN-Revision: 34254
2012-11-19 10:56:09 +00:00
4fa5781a95
kernel: refresh patches
...
SVN-Revision: 34253
2012-11-18 21:40:30 +00:00
86cc79ac98
brcm47xx: add support for kernel 3.6
...
This is based on the patch by Peter Wagner.
SVN-Revision: 34252
2012-11-18 21:27:00 +00:00
db763080f4
kernel: add missing generic config options for 3.6+
...
SVN-Revision: 34250
2012-11-18 20:54:53 +00:00
c159c7a462
kernel: add CONFIG_XZ_DEC=y to generic
...
CONFIG_SQUASHFS_XZ selects CONFIG_XZ_DEC so this could also be moved.
SVN-Revision: 34249
2012-11-18 20:48:53 +00:00
d577d69838
ar71xx: use custom LZMA dictionary size for WNDR3700 images
...
Based on a patch by Hannu Nyman.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34248
2012-11-18 20:25:13 +00:00
935ca3f3eb
add 3.7-rc6 support (patch 820 still has to be fixed)
...
SVN-Revision: 34247
2012-11-18 18:52:38 +00:00
863657d040
generic: ar8216: add MIB counter support for the AR8216 switch as well
...
Thanks to Jonas Gorski for the reference URL.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34245
2012-11-18 16:21:00 +00:00
98f30aac8e
generic: ar8216: rename AR8216_*_STATS_* defines
...
The names are misleading, those are only valid from
AR8236. The AR8216 chip uses different offsets.
Thanks to Jonas Gorski for the report.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34244
2012-11-18 16:20:56 +00:00
9abd8cd004
generic ar8216: allow to read/reset MIB counters via swconfig
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34243
2012-11-18 12:26:35 +00:00
4b17323b51
generic: ar8216: use dynamically allocated private data in ar8216_probe
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34242
2012-11-18 12:26:34 +00:00
169e596268
ar71xx: add user-space support for the RB435G board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34240
2012-11-18 10:18:02 +00:00
d44d954dec
ar71xx: add kernel support for the RB435G board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34239
2012-11-18 10:18:01 +00:00
d62bddc620
ar71xx: update PCI IRQ map for RB4xx devices
...
Should fix #12269 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34238
2012-11-18 09:51:04 +00:00
31881357af
ar71xx: create profile and build image for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34237
2012-11-18 09:32:41 +00:00
9da2c85b67
ar71xx: enable sysupgrade for the OpenMesh MR600
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34235
2012-11-18 09:32:39 +00:00
6380301d01
ar71xx: rename om2p.sh upgrade script to openmesh.sh
...
It will be used on other boards as well.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34234
2012-11-18 09:32:37 +00:00
d325e622d2
scripts/om-fwupgradecfg-gen.sh: add support for the MR600
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34233
2012-11-18 09:32:36 +00:00
c3174179b7
ar71xx: add user-space support for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34232
2012-11-18 09:32:35 +00:00
8d4857d677
ar71xx: add kernel support for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34231
2012-11-18 09:32:33 +00:00
b220071cd2
target specific patches have nothing to do in generic..
...
SVN-Revision: 34230
2012-11-18 09:22:38 +00:00
c90128ce31
generic: remove temporary config file introduced in r34227
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34229
2012-11-18 08:51:56 +00:00
ff1e854511
kernel: update linux 3.6 to 3.6.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34227
2012-11-18 08:41:31 +00:00
a4c205011b
move patches to patches-2.6.36
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34220
2012-11-16 16:32:55 +00:00
974b9f5c9a
remove broken flag
...
The SPARC qemu target works like a charm with the following qemu command-line:
qemu-system-sparc64 -M sun4u -L /home/florian/dev/qemu/pc-bios -kernel build_dir/linux-sparc/linux-3.6.6/vmlinux -nographic
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34219
2012-11-16 16:32:52 +00:00
5261a171e9
update to kernel 3.6.6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34218
2012-11-16 16:32:49 +00:00
7e199fcc06
add missing framebuffer config symbol
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34217
2012-11-16 16:32:45 +00:00
b7f2f14801
advertise jffs2, squashfs and ext4 features
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34216
2012-11-16 16:32:42 +00:00
c6d9304d17
resync kernel configuration with 3.6 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34215
2012-11-16 16:32:39 +00:00
dd70319e6d
build root filesystems and install them in $(BIN_DIR)
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34214
2012-11-16 16:32:36 +00:00
8ad0b56ba5
do not build crashlog on sparc too
...
This is crashing the kernel in crashlog_init_fs(), until fixed, disable it
for SPARC too.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34213
2012-11-16 16:32:33 +00:00
19811eddb4
switch to kernel 3.6.6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34212
2012-11-16 16:32:29 +00:00
f98ac68e0e
add support for 3.6 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34211
2012-11-16 16:32:26 +00:00
c555479127
move acx-mac80211 to the ar7 generic target
...
None of the AC49x boards that we support actually have Wi-Fi.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34208
2012-11-16 13:00:55 +00:00
b763d47bfe
3.6: add some framebuffer related config symbols
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34207
2012-11-16 13:00:51 +00:00
bc73cf5345
push atm, br2684ctl and kmod-pppoa down the DSL Profile
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34206
2012-11-16 13:00:48 +00:00
485f9573f8
brcm47xx: revert r33935: check for .ELF header in partition parser
...
For sysupgrade the generic image should be used and the special image for the wgt634u is just needed for initial flashing over CFE.
russell reported that with this patch sysupgrdae did not worked for him any more and he could not reproduce the error described in #11420 .
With the patch the linux partition also contained the loader which is in the first 128KB.
SVN-Revision: 34201
2012-11-15 16:39:45 +00:00
7da001d068
scripts: rename om2p-fwupgradecfg-gen.sh to more generic om-fwupgradecfg-gen.sh
...
It will be used for non OM2P boards as well.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34200
2012-11-14 14:18:33 +00:00
ee94ed4597
ar71xx: add profile and build image for the Ubiquiti UniFi AP-Outdoor board
...
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34198
2012-11-13 20:57:19 +00:00
9c5c079329
ar71xx: add user-space support for the Ubiquiti UniFi AP-Outdoor board
...
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34197
2012-11-13 20:57:18 +00:00
75c1d3ccc2
ar71xx: add support for the Ubiquiti UniFi AP-Outdoor device
...
[juhosg:
- rename and refresh 660-MIPS-ath79-ubnt-xm-add-unifi-outdoor patches
- wrap long lines in mach-ubnt-xm
- remove default network config, set it from uci-defaults/network
instead
- remove user-space, and image generation stuff]
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34196
2012-11-13 20:57:17 +00:00
7ab0e1566f
ar71xx: add profiles and build images for old PowerCloud System devices
...
[juhosg:
- use 'PowerCloud Systems' instead of 'PCS' in the profiles
- sort SingleProfile instances in image/Makefile]
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34195
2012-11-13 20:57:15 +00:00
f6c3a8ddd6
generic: refresh 3.6 patches
...
SVN-Revision: 34194
2012-11-13 20:57:13 +00:00
e7f77f2742
fix badly named patch file
...
SVN-Revision: 34193
2012-11-13 17:39:44 +00:00
857456aef8
switch to kernel 3.6.6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34192
2012-11-13 17:20:19 +00:00
390b8eb864
fix CBUS UART registration
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34191
2012-11-13 17:20:14 +00:00
62c8ff19ad
ar71xx: add profile and build image for the TL-WA7510N board
...
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34190
2012-11-13 14:48:03 +00:00
165b7d2173
ar71xx: user space support for the TL-WA7510N
...
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34188
2012-11-13 14:48:01 +00:00
91bab828aa
ar71xx: add support for TP-Link TL-WA7510N
...
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.
http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n
[juhosg:
- cleanup commit message
- move non kernel related stuff into separate changes
- rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
- merge WA7510N support into the mach-tl-wa901nd.c file
- add 3.6 support]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34187
2012-11-13 14:48:00 +00:00
ce9d4fadfa
ar71xx: refresh patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34186
2012-11-13 14:47:58 +00:00
3b419e506c
fixes ar9 / dgn3500 support
...
SVN-Revision: 34180
2012-11-13 08:54:14 +00:00
dd8c625424
previous commit pushed 1 file too many ;)
...
SVN-Revision: 34179
2012-11-12 21:36:23 +00:00
ced0cf3a94
move ethernet hw init to init/uninit functions
...
This should fix the stalled irq problem seen by several people.
This is not the real fix, but rather moves the bug to the un/init patch of the driver.
The real bug still needs to be fixed, but this workaround should be suffcient to make
the ethernet stable.
SVN-Revision: 34177
2012-11-12 21:35:01 +00:00
31541f81c3
brcm47xx: remove double definition of kmod-tg3 added in r34150
...
SVN-Revision: 34176
2012-11-12 21:34:00 +00:00
John Crispin
Hauke Mehrtens
Gabor Juhos
Florian Fainelli
Felix Fietkau
Jonas Gorski
Imre Kaloz