Jo-Philipp Wich
964feeb54d
hostapd: introduce "wpa_pair_rekey" and "wpa_master_rekey" options, remove hardcoded wpa rekey intervals, remove hardcoded radius_acct_interim_interval as it might overrule the radius Acct-Interim-Interval attribute
...
SVN-Revision: 28207
2011-09-09 18:19:18 +00:00
Jo-Philipp Wich
cfc23e4c49
hostapd: introduce options to configure the logging behaviour. The config wifi-device section gains the following settings: * log_level (2) - Defines the minimum message level * log_80211 (true) - Log 802.11 events * log_8021x (true) - Log 802.1X events * log_radius (true) - Log RADIUS events * log_wpa (true) - Log WPA events * log_driver (true) - Log driver interface messages * log_iapp (true) - Log IAPP events * log_mlme (true) - Log MLME events
...
SVN-Revision: 28056
2011-08-20 00:13:58 +00:00
Vasilis Tsiligiannis
9d54c7aaaf
hostapd: add accounting configuration to hostapd uci script
...
Hello
This patch add accounting configuration in hostapd.sh
It also change "server, port, key" to "auth_server, auth_port, auth_secret" but keep backward compatibility
Please patch backfire & trunk
Thanks in advance.
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
SVN-Revision: 26482
2011-04-05 15:09:26 +00:00
Felix Fietkau
516440649b
hostapd: add more wps config methods to the config
...
SVN-Revision: 26288
2011-03-25 14:01:05 +00:00
Jo-Philipp Wich
f1ac8cf285
hostapd: allow mixed TKIP/CCMP for 11n
...
SVN-Revision: 25543
2011-02-15 08:49:45 +00:00
Felix Fietkau
b60332deb0
hostapd: Create one control interface per virtual bssid
...
Previously hostapd created one control interface /var/run/hostapd-phyX
which only contained the first virtual bssid (for example wlan0). In
order to access the other virtual bssids with hostapd_cli add all
virtual bssids to /var/run/hostapd-phyX by specifying the ctrl_interface
parameter per bssid.
Previously the control interface looked like:
/var/run/hostapd-phyX/wlan0
Now, the control interface looks like this:
/var/run/hostapd-phyX/wlan0
/var/run/hostapd-phyX/wlan1
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 24985
2011-01-14 10:52:54 +00:00
Felix Fietkau
58ed4ded0e
hostapd: fix appending the iapp_interface variable to the config
...
Signed-off-by: Alexander Couzens <lynxis@c-base.org>
SVN-Revision: 24724
2010-12-19 11:56:49 +00:00
Felix Fietkau
d08bc913a8
hostapd: Allow rsn_preauth configuration
...
Hostapd can allow preauthentication for WPA2-EAP networks when
the interfaces through which preauthentication is allowed are
configured.
Add a new param "rsn_preauth=0/1" to the configuration that enables
or disables preauthentication on the according bridge interface.
Preauthentication for unbridged networks is not considered in this
patch.
Cc: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 24721
2010-12-19 11:48:31 +00:00
Jo-Philipp Wich
0280ac8c92
Set auth_algs in hostapd.conf, make it configurable for WEP Always set auth_algs in hostapd.conf. For WEP, auth_algs is configurable by setting the encryption parameter of a wifi-iface to contain "open" (1, open system), "shared" (2, shared key), or "mixed" (3, permits both open system and shared key.) For example, use "wep+shared" for shared key authentication. The default is default is "open" as it is more secure than "shared" (although WEP is pretty weak regardless.) For non-WEP, "open" is always used.
...
https://dev.openwrt.org/ticket/8120
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 23655
2010-10-27 11:11:04 +00:00
Vasilis Tsiligiannis
1beef305cf
hostapd: Add support for 'iapp_interface' option, thanks stsp ( #7719 )
...
SVN-Revision: 22527
2010-08-08 10:46:24 +00:00
Felix Fietkau
ca4a8b1bee
hostapd: add preliminary wps script support (push-button only, does not handle multi-bss yet)
...
SVN-Revision: 22100
2010-07-08 18:36:17 +00:00
Jo-Philipp Wich
5f895af9fb
hostapd: enforce CCMP WPA cipher if hwmode is 11ng or 11na
...
SVN-Revision: 22000
2010-06-30 21:24:30 +00:00
Jo-Philipp Wich
f391ff4ec8
hostapd: allow *ccmp+tkip and *aes+tkip as well for cipher override
...
SVN-Revision: 21998
2010-06-30 21:03:56 +00:00
Felix Fietkau
db8b1922fc
hostapd: add ap isolate support for mac80211
...
SVN-Revision: 21179
2010-04-26 23:08:03 +00:00
Jo-Philipp Wich
38b256105d
hostapd: fixup madwifi turbo modes ( #7060 )
...
SVN-Revision: 20675
2010-04-03 15:16:33 +00:00
Travis Kemen
7a00430b3e
When enabling MFP, hostapd will read assoc_sa_query_max_timeout and assoc_sa_query_retry_timeout from it's config file. Make these options configurable in /etc/config/wireless. To make it clear that these options are 802.11w related, I named them ieee80211w_max_timeout and ieee80211w_retry_timeout instead.
...
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 20397
2010-03-24 00:23:10 +00:00
Travis Kemen
22b92b3e13
Enable management frame protection in hostapd, and make it configurable in /etc/config/wireless. Since ath9k is currently the only driver that supports MFP, it will only be enabled when ath9k is enabled.
...
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 20396
2010-03-24 00:22:19 +00:00
Jo-Philipp Wich
90c566f557
hostapd: always strip "11" from hwmode value
...
SVN-Revision: 20363
2010-03-21 22:35:58 +00:00
Felix Fietkau
31cfd93be4
hostapd: support creating WEP networks for mac80211 (patch by Stijn Tintel), fixes #6672
...
SVN-Revision: 19720
2010-02-19 01:34:44 +00:00
Felix Fietkau
ba7bfddaae
mac80211: restructure /lib/wifi/mac80211.sh use the new multi-bss single instance hostapd mode move mac80211 specific bits out of /lib/wifi/hostapd.sh add a new option 'htmode' for switching between HT20 and HT40+,HT40-
...
SVN-Revision: 19235
2010-01-20 02:26:05 +00:00
Felix Fietkau
b4ea1b0ac3
hostapd: parse the option for hiding the ESSID ( #6310 )
...
SVN-Revision: 18727
2009-12-09 19:10:54 +00:00
Felix Fietkau
7e3d67e546
hostapd: replace the wme_* config variables with wmm_* ones ( fixes #6247 )
...
SVN-Revision: 18602
2009-11-29 14:13:47 +00:00
Felix Fietkau
36eccaad21
hostapd: implement wds ap support
...
SVN-Revision: 18364
2009-11-11 05:15:51 +00:00
Felix Fietkau
875d957512
mac80211: fill some important capabilities into ht_capab in the hostapd config
...
SVN-Revision: 18293
2009-11-04 21:53:49 +00:00
Felix Fietkau
6e9ada01c0
hostapd: do not configure wme when using madwifi - fixes wpa/wpa2 association problems
...
SVN-Revision: 18051
2009-10-17 04:55:59 +00:00
Felix Fietkau
260d749684
hostapd: initialize wme to sane values
...
SVN-Revision: 17823
2009-10-02 18:55:03 +00:00
Florian Fainelli
838c1d7cd0
add additions from ( #5149 )
...
SVN-Revision: 16841
2009-07-14 13:06:34 +00:00
Vasilis Tsiligiannis
94b56b6c6c
hostapd: Remove deprecated 'debug' configuration variable
...
SVN-Revision: 16594
2009-06-27 22:14:21 +00:00
Hauke Mehrtens
e2f8f72041
hostapd only supports either b or g as hwmode configuration variable. If bg is set the scripts transfers it now to g mode.
...
SVN-Revision: 15182
2009-04-09 21:44:30 +00:00
Felix Fietkau
ca749bea97
wifi: fix hostapd + autochannel
...
SVN-Revision: 15055
2009-03-27 21:14:59 +00:00
Gabor Juhos
782ca84485
hostapd: add 11n mode and ht_capab option for hostapd
...
SVN-Revision: 14713
2009-03-01 18:02:49 +00:00
Felix Fietkau
b29544b2c3
add country code option for hostapd (patch from #4675 )
...
SVN-Revision: 14608
2009-02-22 02:46:04 +00:00
Felix Fietkau
408690fb74
fix hostapd startup for no-crypto configurations
...
SVN-Revision: 14276
2009-01-30 02:52:14 +00:00
Andy Boyett
aa59a08b45
hostapd,wpa_supplicant: create control interfaces for hostapd_cli and wpa_cli
...
SVN-Revision: 14039
2009-01-15 07:50:11 +00:00
Andy Boyett
35078a6a52
hostapd,madwifi: rename agmode option to hwmode. 11a and 11g aren't the only allowed values
...
SVN-Revision: 13790
2008-12-31 19:09:26 +00:00
Felix Fietkau
e050667baa
fix typo
...
SVN-Revision: 13084
2008-10-30 22:49:15 +00:00
Felix Fietkau
a4f11ca22e
use pidfiles for hostapd/wpa_supplicant instead of killing all processes when bringing an interface down - fixes an issue with random hostapd death
...
SVN-Revision: 13078
2008-10-29 17:26:49 +00:00
Felix Fietkau
9161a70235
fix hostapd a/g mode if only the channel is configured in the config
...
SVN-Revision: 13076
2008-10-29 15:52:58 +00:00
Felix Fietkau
69692e019a
parse the a/g mode setting in /etc/config/wireless when setting up hostapd (instead of hardcoding it to g)
...
SVN-Revision: 12673
2008-09-23 18:18:21 +00:00
Florian Fainelli
6b04ad55f9
A WPA(2) pre-shared key can either be specified as a 8 to 63 character passphrase which is hashed to a 256 bit key together with the SSID, or a 64 character hex key. Currently, the latter option is supported by the broadcom wifi type, but no by hostapd. The attached patch allows using a 64 character hex key. ( #3935 )
...
Signed-off-by: thomas@archlinux.org
SVN-Revision: 12394
2008-08-26 17:19:00 +00:00
Florian Fainelli
6c56733f40
Fix hostapd with open access point and per-device configuration, thanks sn9
...
SVN-Revision: 12375
2008-08-23 21:21:04 +00:00
Travis Kemen
b35e663111
add wpa-eap uci configs Signed-off-by: David Bird <david@coova.com>
...
SVN-Revision: 11355
2008-06-04 18:18:58 +00:00
Travis Kemen
fe7e52b4fa
change psk back to key
...
SVN-Revision: 10488
2008-02-18 23:40:31 +00:00
Michael Büsch
7a62cb1f15
hostapd.sh: Fix typo. The PSK is expected in the "psk" variable, but we put it into the "key" variable.
...
SVN-Revision: 10478
2008-02-17 13:30:24 +00:00
Felix Fietkau
d913bf3c49
move hostapd setup script from wireless-tools to hostapd package
...
SVN-Revision: 7000
2007-04-18 12:40:27 +00:00