4127e73b84
firewall: also set up nat reflection rules for redirects with proto all and/or no src_dport set
...
SVN-Revision: 32652
2012-07-09 12:23:36 +00:00
15189a628a
firewall: allow incoming ICMPv6 router-advertisement and neighbor-advertisement, thanks swalker
...
SVN-Revision: 32127
2012-06-08 14:20:34 +00:00
9ae901445b
/etc/functions.sh => /lib/functions.sh
...
SVN-Revision: 32062
2012-06-05 16:04:23 +00:00
963a0cd98b
firewall: fix nat reflection after netifd status format change - use /lib/functions/network.sh - simplify nat reflection code
...
SVN-Revision: 31936
2012-05-28 03:15:05 +00:00
329d18a25c
firewall: rework interface address determination to skip ipv6 addresses
...
SVN-Revision: 31755
2012-05-16 13:37:49 +00:00
82fc13d3c2
firewall: fix nat reflection after netifd switch ( #11460 )
...
SVN-Revision: 31754
2012-05-16 13:03:54 +00:00
075618c6e3
minor change: adjust formatting of firewall.config
...
- remove trailing whitespaces (s/\ $//g)
- replace spaces with tabs between options and values
SVN-Revision: 31427
2012-04-21 19:42:28 +00:00
d74c6ce7c5
firewall: revert processing order of redirects and rules, ensures that rules can be used to filter before redirects are reached
...
SVN-Revision: 31014
2012-03-18 23:34:06 +00:00
dd6c299d2e
firewall: fix fw__uci_state_del() procedure ( #11132 )
...
SVN-Revision: 30938
2012-03-13 21:22:13 +00:00
9aaca7f1b1
firewall: allow ICMPv6 type 129 (echo reply) - this fixes basic ICMPv6 in case no connection tracking is used
...
SVN-Revision: 30727
2012-02-25 21:00:23 +00:00
fe2d387a8c
firewall: bail out if uci is used in firewall include files
...
SVN-Revision: 30694
2012-02-23 18:50:47 +00:00
5609ad736e
firewall: don't filter IPv4 ICMP types ( #10928 )
...
SVN-Revision: 30363
2012-02-07 18:35:48 +00:00
8094fa46da
firewall: add support for "local" port forwards which target an internal address on the router itself
...
SVN-Revision: 29687
2012-01-08 15:29:24 +00:00
77dda8d67a
firewall: - introduce per-section "option enabled" which defaults to "1" - useful to disable rules or zones without having to delete them - annotate default traffic rules with names - bump version
...
SVN-Revision: 29577
2011-12-20 01:10:15 +00:00
10f199d832
firewall: add DHCPv6 default rule ( #10381 )
...
SVN-Revision: 28874
2011-11-09 11:10:37 +00:00
50a22f4f9e
firewall: relocate TCPMSS rules into mangle table, add code to selectively clear them out again
...
SVN-Revision: 28669
2011-10-29 18:02:45 +00:00
c7ac1b5b0c
firewall: do not produce 0.0.0.0/0 if a symbolic masq_src or masq_dest is given but does not resolve to an ip
...
SVN-Revision: 28628
2011-10-27 18:14:55 +00:00
204bf6e5fe
firewall: prevent ip6tables -t nat rules ( #10265 )
...
SVN-Revision: 28535
2011-10-23 12:25:57 +00:00
69df551be3
firewall: fix another instance of unquoted "*"
...
SVN-Revision: 28529
2011-10-22 21:38:10 +00:00
9a61d9e513
firewall: fix possible expansion of "*" when rules with "option src *" are processed
...
SVN-Revision: 28527
2011-10-22 20:11:25 +00:00
e0e73928da
firewall: do not check for module availability, let iptables fail if a feature is not present ( #7610 )
...
SVN-Revision: 28525
2011-10-22 19:50:35 +00:00
995face56d
firewall: make ESTABLISHED,RELATED rules match before INVALID, use conntrack instead of state match ( #10038 )
...
SVN-Revision: 28148
2011-09-01 20:37:22 +00:00
f1e7045d30
firewall: further tune ICMPv6 default rules according to RFC4890 ( #9893 )
...
SVN-Revision: 27979
2011-08-14 00:33:29 +00:00
7a206885df
firewall: prevent redundant rules if multiple ports and multiple icmp types are given in a rule block for both icmp and other protocols
...
SVN-Revision: 27792
2011-07-26 22:21:39 +00:00
90ac92e8be
firewall: fix serious bug in state var handling ( #9746 )
...
SVN-Revision: 27711
2011-07-20 15:29:10 +00:00
78fa88ca81
firewall: rework state variable handling, use uci_toggle_state() where applicable and properly handle duplicates in add and del state helpers ( #9152 , #9710 )
...
SVN-Revision: 27618
2011-07-15 15:03:57 +00:00
a92ed1808c
firewall: make sure that -m mac is used with --mac-source, follow up to r27508
...
SVN-Revision: 27519
2011-07-07 10:28:31 +00:00
ca7383e701
firewall: also correct another variable missed in previous commit
...
SVN-Revision: 27508
2011-07-07 08:59:40 +00:00
c8531fca5d
firewall: fix wrong variable names for protocol command line parameter - were missed during r27500
...
SVN-Revision: 27507
2011-07-07 08:54:29 +00:00
dd4934a943
firewall: - solve scoping issues when multiple values are used, thanks Daniel Dickinson - ignore src_port/dest_port for proto icmp rules, ignore icmp_type for non-icmp rules - properly handle icmp when proto is given in numerical form (1, 58) - support negated icmp types
...
SVN-Revision: 27500
2011-07-06 22:10:46 +00:00
05c45f0f5e
firewall: fix udp rules for tcpudp proto rules using src_port and dest_port after modification by the parsing of the tcp rule
...
SVN-Revision: 27469
2011-07-06 06:26:12 +00:00
600a8517ad
firewall: fix port range quirk in previous commit
...
SVN-Revision: 27335
2011-07-01 11:50:48 +00:00
df14a48dc9
firewall: properly handle negated ports in nat reflection
...
SVN-Revision: 27334
2011-07-01 11:48:14 +00:00
07abf4a81e
firewall: refine default ICMPv6 rules to better conform with RFC4890, do not forward link local ICMP message types, allow parameter problem
...
SVN-Revision: 27321
2011-06-30 12:22:05 +00:00
8f0fb81dfe
firewall: restore local port relocation ability from r26617
...
SVN-Revision: 27318
2011-06-30 01:36:09 +00:00
68a1c8e1e3
firewall: - allow multiple ports, protocols, macs, icmp types per rule - implement "limit" and "limit_burst" options for rules - implement "extra" option to rules and redirects for passing arbritary flags to iptables - implement negations for "src_port", "dest_port", "src_dport", "src_mac", "proto" and "icmp_type" options - allow wildcard (*) "src" and "dest" options in rules to allow specifying "any" source or destination - validate symbolic icmp-type names against the selected iptables binary - properly handle forwarded ICMPv6 traffic in the default configuration
...
SVN-Revision: 27317
2011-06-30 01:31:23 +00:00
9f37422f2f
firewall: ensure that fw_get_subnet4() sets an empty value if no (valid) IPv4 addr was found
...
SVN-Revision: 27198
2011-06-16 22:18:45 +00:00
c014101d73
firewall: allow symbolic names of interfaces and aliases in masq_src and masq_dest
...
SVN-Revision: 27196
2011-06-16 21:54:59 +00:00
f2b7c81d46
firewall: explictely mention network in default configuration, makes it less confusing
...
SVN-Revision: 26961
2011-05-20 13:45:40 +00:00
2e9e4c435f
firewall: revert accidential committed changes from r26805
...
SVN-Revision: 26806
2011-05-02 12:55:36 +00:00
ad23dd94b6
firewall: provide examples of ssh port relocation on firewall and IPsec passthrough Two examples of potentially useful configurations (commented out, of course):
...
(a) map the ssh service running on the firewall to 22001 externally, without modifying the configuration of the daemon itself. this allows port 22 on the WAN side to then be port-forwarded to a
LAN-based machine if desired, or if not, simply obscures the port from external attack.
(b) allow IPsec/ESP and ISAKMP (UDP-based key exchange) to happen by default. useful for most modern VPN clients you might have on your WAN.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26805
2011-05-02 12:54:31 +00:00
2a386cee99
firewall: prevent excessive uci state data aggregation ( #9152 )
...
SVN-Revision: 26740
2011-04-20 11:49:09 +00:00
a9977eca91
firewall: allow local redirection of ports
...
Allow a redirect like:
config redirect
option src 'wan'
option dest 'lan'
option src_dport '22001'
option dest_port '22'
option proto 'tcp'
note the absence of the "dest_ip" field, meaning to terminate the connection on the firewall itself.
This patch makes three changes:
(1) moves the conntrack module into the conntrack package (but not any of the conntrack_* helpers).
(2) fixes a bug where the wrong table is used when the "dest_ip" field is absent.
(3) accepts incoming connections on the destination port on the input_ZONE table, but only for DNATted
connections.
In the above example,
ssh -p 22 root@myrouter
would fail from the outside, but:
ssh -p 22001 root@myrouter
would succeed. This is handy if:
(1) you want to avoid ssh probes on your router, or
(2) you want to redirect incoming connections on port 22 to some machine inside your firewall, but
still want to allow firewall access from outside.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26617
2011-04-12 20:03:59 +00:00
af82471525
firewall: prevent duplicate values in interface state vars
...
SVN-Revision: 26382
2011-03-30 20:29:17 +00:00
a2cd7b2883
Keep firewall.user during sysupgrades
...
SVN-Revision: 26241
2011-03-20 00:57:47 +00:00
13333a6742
firewall: move include sourcing into a subshell, this makes the firewall init immune against exit in the include scripts
...
SVN-Revision: 25835
2011-03-02 19:20:29 +00:00
1ca64678bb
firewall: fix rule generation for v4 or v6 only zones ( #8955 )
...
SVN-Revision: 25813
2011-03-01 18:04:14 +00:00
04b20727d8
firewall: fix wrong rule order if multiple protocols are used
...
SVN-Revision: 25179
2011-01-27 22:19:53 +00:00
a43f5b5038
firewall: insert SNAT and DNAT rules according to the order of the configuration file ( #8052 )
...
SVN-Revision: 23318
2010-10-08 12:11:55 +00:00
7bf84dc4f8
firewall: also establish forward rules when setting up nat reflection, back out early if reflection is disabled
...
SVN-Revision: 23201
2010-10-03 18:11:59 +00:00
Jo-Philipp Wich
Mirko Vogt
Daniel Dickinson
Travis Kemen