d0646a08aa
ppc40x: enable USB support
...
Cc: backfire@openwrt.org
SVN-Revision: 20933
2010-04-16 18:40:12 +00:00
3669209288
ppc40x: add isp116x-hcd to the device tree for the OpenRB board
...
Cc: backfire@openwrt.org
SVN-Revision: 20932
2010-04-16 18:40:10 +00:00
b448703ea8
ppc40x: make isp116x-hcd driver usable on the OpenRB board
...
Cc: backfire@openwrt.org
SVN-Revision: 20931
2010-04-16 18:40:06 +00:00
e0ba83e32e
ppc40x: add more EBC_BXCR defines
...
Cc: backfire@openwrt.org
SVN-Revision: 20930
2010-04-16 18:40:02 +00:00
15d344df50
ppc40x: move perwe fixup into a separate function
...
Cc: backfire@openwrt.org
SVN-Revision: 20929
2010-04-16 18:39:52 +00:00
e712ef386e
brcm47xx: fix ide drive assignment ( closes #7061 )
...
SVN-Revision: 20924
2010-04-16 15:05:32 +00:00
7e29eac780
- enable PCI - add kmod-pcnet32 to default packages - make kmod-pcnet32 available for malta target
...
SVN-Revision: 20923
2010-04-16 11:34:21 +00:00
1c0e751391
ar71xx: fix up alignment handling
...
- on ar724x, rx buffers can be aligned with an offset of 2, which keeps the ip header aligned
- alignment offset is only added if the ar8216 workaround is not active and the phy driver does not advertise its own packet alignment
- ar71xx and ar91xx can not handle rx alignment offsets, however taking a hit on unaligned exceptions seems to have less overhead than re-aligning the data for large packets
- use memmove to re-align small packets, if necessary
tested on ar9132, ar7240 and ar7242 based devices without ar8216 headers
SVN-Revision: 20892
2010-04-15 23:31:17 +00:00
598e0656c5
brcm47xx: add preliminary 2.6.34 support
...
SVN-Revision: 20888
2010-04-15 20:50:50 +00:00
af45b63a85
2.6.34: fix kzalloc error
...
SVN-Revision: 20881
2010-04-15 16:46:24 +00:00
34474b8840
target/adm5120: fix image building after r20834
...
SVN-Revision: 20855
2010-04-14 21:13:59 +00:00
841eff56d4
target/ixp4xx: fix image building after r20834 ( closes : #7157 )
...
SVN-Revision: 20854
2010-04-14 14:36:41 +00:00
fe5d55977e
tools/firmware-utils/imagetag: Fixed Pirelli Alice Gate CRC calculation in imagetag (was invalid strings in bcm_tag.h). Closes #7120
...
SVN-Revision: 20850
2010-04-14 00:45:48 +00:00
6fd5014c56
add Buffalo WHR-G125 specifc switch quirks to netconfig, shorten code by merging identical fixes
...
SVN-Revision: 20846
2010-04-13 22:34:13 +00:00
b5cfd7bde5
add lzma/jffs2 patches for 2.6.34
...
SVN-Revision: 20845
2010-04-13 21:45:03 +00:00
668fd62080
don't use lzma/jffs2 on <2.6.33, set lzma/jffs2 as default for >=2.6.33. switch verbose mode on compresor statistics.
...
SVN-Revision: 20844
2010-04-13 21:36:58 +00:00
e438c665db
vp6500: Add backlight device
...
SVN-Revision: 20843
2010-04-13 20:52:41 +00:00
231012cba0
ar71xx: fix image builds (broken by r20834)
...
SVN-Revision: 20840
2010-04-13 18:01:46 +00:00
e2b57ecf5f
define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files
...
SVN-Revision: 20834
2010-04-12 23:15:56 +00:00
0946764732
remove 'svn:executable' property
...
SVN-Revision: 20831
2010-04-12 17:08:57 +00:00
c2c88d315f
add jffs2/lzma support (not activated by default yet)
...
SVN-Revision: 20828
2010-04-12 13:14:42 +00:00
06cece53ef
fix module loading due to CONFIG_LOCALVERSION being on ( #7144 )
...
SVN-Revision: 20822
2010-04-12 12:33:41 +00:00
185965e128
ppc40x: add sysupgrade support
...
Cc: backfire@openwrt.org
SVN-Revision: 20821
2010-04-12 12:21:18 +00:00
bc4cd8c850
ppc40x: increase kernel partition size on OpenRB/Magicbox
...
Cc: backfire@openwrt.org
SVN-Revision: 20820
2010-04-12 12:21:15 +00:00
bd0c2617f1
ppc40x: sync kernel config
...
Cc: backfire@openwrt.org
SVN-Revision: 20819
2010-04-12 12:21:12 +00:00
efaf0367f2
mpc83xx: add 2.6.33 support
...
SVN-Revision: 20818
2010-04-12 10:47:00 +00:00
985ce5e3fa
vp6500: Add leds and keypad devices.
...
SVN-Revision: 20817
2010-04-12 00:11:18 +00:00
d3f097bfde
Add missing symbols to 2.6.34 config
...
SVN-Revision: 20816
2010-04-11 22:30:27 +00:00
e95a1d7228
Use lzma kernel compression.
...
SVN-Revision: 20815
2010-04-11 22:12:10 +00:00
fba1a0a074
swconfig: Check vlan/port indexes for validity.
...
Swconfig needs to make sure that requested vlans/ports actually exist,
else it might read or modify memory not belonging to itself.
This patch adds a quick range check in swconfig's kernel part to
prevent accidential or intentional memory modification.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 20811
2010-04-11 20:51:37 +00:00
2a018eb380
refresh 2.6.33 patches for 2.6.33.2
...
SVN-Revision: 20803
2010-04-11 18:15:15 +00:00
de18353622
ramips: nuke clocksource init patch
...
SVN-Revision: 20802
2010-04-11 17:47:30 +00:00
b4bb5ebfaa
ramips: generate sysupgrade images for the rt305x devices
...
SVN-Revision: 20801
2010-04-11 17:47:28 +00:00
7581054e93
ramips: add sysupgrade support
...
SVN-Revision: 20800
2010-04-11 17:47:25 +00:00
09aec474af
ramips: add diag support
...
SVN-Revision: 20799
2010-04-11 17:47:23 +00:00
2872bade69
ramips: enable image commandline hack and cmdline partition parsing
...
SVN-Revision: 20798
2010-04-11 17:47:20 +00:00
af05b16c98
ramips: add default profiles
...
SVN-Revision: 20797
2010-04-11 17:47:17 +00:00
d1031cd861
time.c: Timer enable registers are only 8bit width.
...
SVN-Revision: 20796
2010-04-11 16:24:06 +00:00
15e8d2e0b7
add net5501 support
...
This patch brings up the net5501 platform.
Note that the x86/ target included support for all x86/ class
processors. That's not technically correct. This should be constrained
only to the "generic" subtarget. Every x86-class target that isn't
generic should be able to select only the optimizations/capabilities
applicable to that architectural variant.
It's also assumed that all x86 processors have keyboard & mouse ports,
ISA, DMI, ACPI... the embedded ones typically don't. Again, moving
that to the generic subtarget.
Fortunately, this was a fairly benign tweak.
The net5501 board includes the following logic:
Geode/LX processor
CS5535 super-I/O chip
PC87360 sensor chip
Via Rhine Ethernet controllers
Via Sata controllers
USB, LEDS, I2C
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
SVN-Revision: 20794
2010-04-11 12:36:55 +00:00
62b96185c3
ixp4xx: add Titan Wireless TW-266-2 support (thanks juhosg & florian)
...
SVN-Revision: 20793
2010-04-11 09:03:10 +00:00
3c48fb6ff9
ixp4xx: add 2.6.33 support
...
SVN-Revision: 20792
2010-04-11 09:01:36 +00:00
f4d71f5e81
create two endian-specific subtargets, as malta can run both
...
SVN-Revision: 20790
2010-04-10 21:02:51 +00:00
b4d0b6cbb3
adss 2.6.33 kernel patches, not defult yet as linux-atm breaks on 2.6.33
...
SVN-Revision: 20789
2010-04-10 20:11:28 +00:00
6d12bc20ce
remove 2.6.32 files, out of sync and going to be replaced differently
...
SVN-Revision: 20787
2010-04-10 18:44:44 +00:00
1d8823ae61
Add mx2 target with very basic support for the vp6500 voip phone
...
SVN-Revision: 20786
2010-04-10 18:37:34 +00:00
1633dd6b6c
ar71xx: add a profile for PB92
...
SVN-Revision: 20778
2010-04-10 16:50:20 +00:00
8f25fb6086
add script to fixup the wireless mac ( #7102 )
...
SVN-Revision: 20775
2010-04-10 14:29:01 +00:00
3491026cbb
Generic: Clean up output of AR8216 driver.
...
This patch is rather a cosmetic patch. It fixes the following issues:
* Demote the unknown device message to debug level to not spam
the log.
* Fix the version print of the unknown device message.
* Output the 'attach' message only when attaching as switch driver,
not when attaching as phy driver.
* Correctly return NET_RX_DROP when dropping packets.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
Cc: bacfire@openwrt.org
SVN-Revision: 20773
2010-04-10 11:34:11 +00:00
222390bafc
refresh patches
...
SVN-Revision: 20767
2010-04-09 19:26:57 +00:00
b87e590b24
do not overwrite ENET_CTL_REG, fixes ethernet on bcm6338
...
SVN-Revision: 20765
2010-04-09 18:43:36 +00:00
Gabor Juhos
Alexandros C. Couloumbis
Jo-Philipp Wich
Felix Fietkau
Nicolas Thill
Daniel Dickinson
Lars-Peter Clausen
Florian Fainelli
John Crispin