Commit Graph

61 Commits (9f93bd51cfb695111000605877602089622e42f0)

Author SHA1 Message Date
Gabor Juhos 6bfeb81548 experimental support for 2.6.27
SVN-Revision: 12863
2008-10-05 11:07:49 +00:00
Gabor Juhos 94fee20231 remove 2.6.25 specific stuff
SVN-Revision: 12598
2008-09-13 17:32:20 +00:00
Gabor Juhos 904effc167 fix gpio number of the reset button Compex WP54 boards
SVN-Revision: 12296
2008-08-13 16:15:45 +00:00
Gabor Juhos dbb6051caf add alternative board id for the ZyXEL P-334WT
SVN-Revision: 12232
2008-08-07 08:49:23 +00:00
Gabor Juhos 027a7939f1 experimental gpiodev support (closes #3613)
SVN-Revision: 12134
2008-08-05 11:16:46 +00:00
Gabor Juhos 3ea42e8083 add missing buttons device for RB-1xx boards, thanks to Christophe Lucas
SVN-Revision: 12095
2008-08-04 15:21:41 +00:00
Gabor Juhos b04b135946 make use DMA_BIT_MASK
SVN-Revision: 11966
2008-07-28 07:25:40 +00:00
Gabor Juhos 6569108c7c make boot quiet a bit
SVN-Revision: 11939
2008-07-26 18:05:38 +00:00
Gabor Juhos 3cc6f9bd75 use __raw_{readl,writel} routines in the GPIO code
SVN-Revision: 11560
2008-06-22 19:08:19 +00:00
Gabor Juhos cb076ccb14 IRQ code cleanup
SVN-Revision: 11528
2008-06-17 17:46:52 +00:00
Gabor Juhos 11b8dfe86c add button devices to several boards
SVN-Revision: 11402
2008-06-08 06:37:31 +00:00
Gabor Juhos 9720836ec6 make use the chip_fixup function of the plat_nand driver
SVN-Revision: 11376
2008-06-06 09:03:35 +00:00
Gabor Juhos bd507b0146 improve support of the Infineon EASY 5120-RT Reference Board
SVN-Revision: 10996
2008-05-01 18:34:44 +00:00
Gabor Juhos bb5cd9c240 fix a bug in the GPIO code
SVN-Revision: 10759
2008-04-07 14:10:37 +00:00
Gabor Juhos d187aba072 switch to 2.6.24
SVN-Revision: 10427
2008-02-09 10:29:28 +00:00
Gabor Juhos 128bb0967a add preliminary support for 2.6.24
SVN-Revision: 10329
2008-01-30 15:25:48 +00:00
Gabor Juhos 9bfca5ce18 don't use mips_machgroup
SVN-Revision: 10328
2008-01-30 14:06:59 +00:00
Gabor Juhos 9c1dfdc702 more license cleanups
SVN-Revision: 10313
2008-01-29 19:56:39 +00:00
Gabor Juhos 43a86a8863 add experimental support for the Cellvision NFS-101U device
SVN-Revision: 10307
2008-01-29 08:37:40 +00:00
Gabor Juhos 7d92be2f94 license cleanup
SVN-Revision: 10305
2008-01-29 08:23:40 +00:00
Gabor Juhos a3d82d79bf convert Cellvision board structures
SVN-Revision: 10242
2008-01-25 08:16:40 +00:00
Gabor Juhos d322722f26 use reset function on the NP28G boards
SVN-Revision: 9963
2007-12-27 15:10:56 +00:00
Gabor Juhos c128344870 change switch register access macros
SVN-Revision: 9962
2007-12-27 14:58:48 +00:00
Gabor Juhos ab473bd48f fix compiler warning
SVN-Revision: 9933
2007-12-26 20:55:18 +00:00
Gabor Juhos c11c4de50b revert [9788], the ADM5120 datasheet v1.16 contains bad values
SVN-Revision: 9790
2007-12-17 16:39:53 +00:00
Gabor Juhos 418b0361ea remove invalid GPIO definitions for the RB153
SVN-Revision: 9789
2007-12-17 16:01:51 +00:00
Gabor Juhos 12295e7c0d fix level setup code for GPIO IRQs
SVN-Revision: 9788
2007-12-17 15:45:16 +00:00
Gabor Juhos 3befb653fa add support for LEDs on the NP28G board, thanks to kenny (closes: #2825)
SVN-Revision: 9781
2007-12-16 19:03:40 +00:00
Gabor Juhos fa10728685 use a shadow value for the write-only GPIO_CONF2 register
SVN-Revision: 9715
2007-12-12 12:42:40 +00:00
Gabor Juhos a6a8cb6a55 fix mac address setup on RouterBOARDs
SVN-Revision: 9713
2007-12-12 08:43:41 +00:00
Gabor Juhos 224aaf34ac enable wait state pin for the CF slot on the RB153 board
SVN-Revision: 9709
2007-12-11 17:59:42 +00:00
Gabor Juhos bb6c1aa770 new experimental driver for the CF slot on the RouterBOARD 153
SVN-Revision: 9707
2007-12-11 09:00:06 +00:00
Gabor Juhos 9b9b83976c add support for GPIO IRQs
SVN-Revision: 9700
2007-12-10 14:05:01 +00:00
Florian Fainelli d37e090fe9 Setup MAC addresses for routerboards
SVN-Revision: 9682
2007-12-09 14:43:42 +00:00
Gabor Juhos 7c70e465c7 RB153 must use the generic RB1xx's setup code
SVN-Revision: 9491
2007-11-03 15:35:25 +00:00
Florian Fainelli 647541a1a0 CF driver cleanup
SVN-Revision: 9473
2007-11-01 17:11:16 +00:00
Gabor Juhos 5f122462c0 minor cleanups
SVN-Revision: 9423
2007-10-24 08:19:16 +00:00
Gabor Juhos 71f9b205e4 fix flash driver, it should work on RB150 as well
SVN-Revision: 9418
2007-10-23 12:31:13 +00:00
Florian Fainelli 2514d7f799 The RB513 CF driver is now a module, enable it by default for the RB1xx profile. Fix the membase of the CF driver.
SVN-Revision: 9416
2007-10-23 10:46:19 +00:00
Florian Fainelli 2a0ca50ce2 Add preliminary support for the Routerboard 153 CF slot (#2550)
SVN-Revision: 9403
2007-10-22 20:56:34 +00:00
Gabor Juhos 36a1feebdd add ids for Edimax BR-6104Wg boards
SVN-Revision: 9342
2007-10-18 07:40:01 +00:00
Gabor Juhos 49b631d730 switch driver cleanup, 4th phase
SVN-Revision: 9340
2007-10-17 08:10:47 +00:00
Gabor Juhos 0fa0801a32 coding style fixes
SVN-Revision: 9263
2007-10-11 15:09:50 +00:00
Gabor Juhos a72e25de51 switch to 2.6.23
SVN-Revision: 9260
2007-10-11 09:11:56 +00:00
Gabor Juhos f1e27efedd NAND driver cleanups, thanks to Alexandros C. Couloumbis for testing * use generic NAND driver from now * add experimental support for RouterBOARD 150 NAND device
SVN-Revision: 9118
2007-10-04 10:56:38 +00:00
Gabor Juhos ffec4f2913 prepare trxsplit to support sysupgrade
SVN-Revision: 9085
2007-10-01 09:51:32 +00:00
Gabor Juhos df39c50c9a fix mach_type for the WP54G-WRT board
SVN-Revision: 9040
2007-09-26 17:58:44 +00:00
Gabor Juhos 1c492d9972 add missing PCI irq map for the RouterBOARD 133 (closes #2431)
SVN-Revision: 9039
2007-09-26 17:05:16 +00:00
Gabor Juhos 728ec89e7d fix initcall level of adm5120_board_setup()
SVN-Revision: 9016
2007-09-25 13:42:45 +00:00
Gabor Juhos 6e7fafe998 move pci_irq_map definitions into the board specific files
SVN-Revision: 9009
2007-09-24 16:59:23 +00:00