Commit Graph

7535 Commits (975355a2b1faf4e02d7c53c354fbae09ec8aa7ce)

Author SHA1 Message Date
Gabor Juhos 0612667c34 ar71xx: configure default led behavior for the OM2P
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 29394
2011-12-01 22:48:59 +00:00
Gabor Juhos 3fccc3b376 ramips: enable sysupgrade on the RT-N15 board
SVN-Revision: 29393
2011-12-01 22:48:58 +00:00
Gabor Juhos 4b2d1c3ad3 ramips: wrap long line in platform upgrade script
SVN-Revision: 29392
2011-12-01 22:48:57 +00:00
Gabor Juhos d622263588 ramips: add profile for the Asus RT-N15
This uses previously submitted rtl8366 kernel packages.

[juhosg: The kmod-gpio-dev package has been removed from the package list.]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29391
2011-12-01 22:48:55 +00:00
Gabor Juhos 3a9e02fa41 ramips: setup default network configuration for RT-N15
Based on a patch by Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29390
2011-12-01 22:48:54 +00:00
Gabor Juhos fc61c107f0 ramips: rt288x: add swconfig and rtl8366{s,_smi} drivers to the default profile
It is needed by the RT-N15 board.

SVN-Revision: 29389
2011-12-01 22:48:53 +00:00
Gabor Juhos 80221fcd2a ramips: remove default network configuration, and generate that from uci-defaults
SVN-Revision: 29387
2011-12-01 22:48:51 +00:00
Gabor Juhos 4f6c58adac ramips: use /lib/functions/uci-defaults.sh
SVN-Revision: 29386
2011-12-01 22:48:48 +00:00
Gabor Juhos 39348e387f ar71xx: use /lib/functions/uci-defaults.sh
SVN-Revision: 29385
2011-12-01 22:48:47 +00:00
Gabor Juhos 569d8de6d6 ramips: simplify uci-defaults/network script
SVN-Revision: 29383
2011-12-01 22:48:45 +00:00
Gabor Juhos 66c9a351dd ramips: setup mac and network interfaces from separate functions
SVN-Revision: 29382
2011-12-01 22:48:43 +00:00
Gabor Juhos 62d18e9f9a ramips: fix Asus RT-N15 board support
Fix Asus RT-N15 flash partitions and make an image.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29381
2011-12-01 22:48:42 +00:00
Gabor Juhos 2dd79d55c7 ramips: Sparklan wcr-150gn board fixes
* Fix partition sizes.
 * Add buttons and leds.
 * Register usb.
 * Remove unnecessary stuff from image Makefile
 * Fix rt2x00 eeprom extract.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29380
2011-12-01 22:48:41 +00:00
Gabor Juhos 7c678e7511 ramips: fix package name of kmod-input-gpio-buttons
Based on a patch from Omnima Limited.

SVN-Revision: 29379
2011-12-01 22:48:39 +00:00
Gabor Juhos 2ed38b24a8 ramips: move kmod-rt2800-pci to DEFAULT_PACKAGES
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29378
2011-12-01 22:48:38 +00:00
Gabor Juhos 295e04084c ramips: setup bc2 mac addresses from the generic network script
SVN-Revision: 29377
2011-12-01 22:48:37 +00:00
Gabor Juhos 02f95d4fb3 ramips: combine network setup for all boards in one file
Inspired by the patch from Roman Yeryomin. Thanks, Roman!
This removes unnecessary duplication and simplifies network setup for new
boards. It would be a one line change most likely.

[juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards
in order to avoid regression]

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 29376
2011-12-01 22:48:35 +00:00
John Crispin 88cb7ae104 omap24xx: bump to 3.1.3
SVN-Revision: 29349
2011-11-28 12:46:18 +00:00
John Crispin bf7316424c lantiq: bump to 3.1.3
SVN-Revision: 29348
2011-11-28 10:22:58 +00:00
Nicolas Thill 5e83009a52 targets: fix CONFIG_USB_STORAGE_* inconsistency
* all options were switched from bool to tristate in 2.6.30
 * add/change/move them to generic, disabled by default
 * remove extinct CONFIG_USB_STORAGE_DPCM dropped in 2.6.29, merged with CONFIG_USB_STORAGE_SDDR09
 * remove extinct CONFIG_USB_STORAGE_SIERRA option in 2.6
 * cleanup ordering

SVN-Revision: 29337
2011-11-25 20:47:44 +00:00
Gabor Juhos f20797306a ar71xx: modify phy mask of the WP543 board
This fixes ethernet on newer boards. Based on a patch from #9702.

SVN-Revision: 29328
2011-11-24 20:09:43 +00:00
Gabor Juhos c20d7378e5 ar71xx: fix wndr3800 machine name
This fixes the machine name in /proc/cpuinfo and luci status page machine name.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

SVN-Revision: 29326
2011-11-24 20:09:38 +00:00
Gabor Juhos 600b6efc41 ar71xx: copy atheros initramfs images to the image directory
SVN-Revision: 29325
2011-11-24 20:09:35 +00:00
Gabor Juhos d97cf76790 ar71xx: specify mtd layout in command line for the DB120 board
SVN-Revision: 29324
2011-11-24 20:09:32 +00:00
John Crispin 9389593db9 lantiq: drop 009-MIPS-make-oprofile-use-cp0_perfcount_irq-if-it-is-se.patch
This patch is/was a duplicate of generic/patches-3.1/307-mips_oprofile_fix.patch

SVN-Revision: 29294
2011-11-23 12:22:15 +00:00
John Crispin 4982ca983c lantiq: * fixes ath5k eeprom handling * fixes sx76x * adds sx76x to userland api * minor style cleanups
Signed-of-by: Andrej Vlašić <andrej.vlasic0@gmail.com>

SVN-Revision: 29292
2011-11-22 18:50:51 +00:00
Florian Fainelli 718907b661 don't package gpioctl by default
SVN-Revision: 29288
2011-11-21 16:36:39 +00:00
Nicolas Thill c33f21ae95 target/uml: export atomic64_* functions on 32-bit x86
SVN-Revision: 29287
2011-11-21 14:28:33 +00:00
Gabor Juhos 9990523a0f ar71xx: set GE0 phy_mask for AR933x
SVN-Revision: 29274
2011-11-20 11:30:10 +00:00
Jo-Philipp Wich b5739aabd9 fix D-Link DSL-2650U image generation
SVN-Revision: 29266
2011-11-19 21:34:51 +00:00
Jonas Gorski 8bac0df4ae linux: update 3.0 to 3.0.9
SVN-Revision: 29264
2011-11-19 18:39:12 +00:00
Florian Fainelli ae90aa4efd build images for D-Link DSL-2650U (#9003)
SVN-Revision: 29238
2011-11-18 10:37:03 +00:00
Michael Büsch 0b86c2648a omap24xx: Fix cbus nested IRQ acking
SVN-Revision: 29237
2011-11-17 22:31:27 +00:00
Michael Büsch df2810831c omap24xx: Fix initialization of software IRQ mask
SVN-Revision: 29236
2011-11-17 21:02:00 +00:00
Michael Büsch 3f92f7dd90 omap24xx: Update 3.1 config
SVN-Revision: 29234
2011-11-17 19:35:57 +00:00
Michael Büsch 4793be2df9 omap24xx: Some retu/tahvo IRQ fixes
SVN-Revision: 29233
2011-11-17 18:06:19 +00:00
Michael Büsch 630bafc5dd omap24xx: Add basic kexec fixes.
SVN-Revision: 29232
2011-11-17 14:57:34 +00:00
Michael Büsch 06c986984e omap24xx: Add workaround for omapfb locking bug.
SVN-Revision: 29201
2011-11-16 22:34:38 +00:00
Michael Büsch 0f03e17bd0 Revert r29193
SVN-Revision: 29195
2011-11-16 19:03:23 +00:00
Michael Büsch 93f02b1ba0 omap24xx: Set platform specific optimization flags
SVN-Revision: 29194
2011-11-16 19:02:12 +00:00
Michael Büsch b058e97af4 n810: Add xmodmap to profile
SVN-Revision: 29193
2011-11-16 19:01:19 +00:00
Florian Fainelli 8d66465b08 include bridge and 8021q modules by default
SVN-Revision: 29164
2011-11-15 22:24:22 +00:00
John Crispin bbe96f13a6 lantiq: add runtime generation of /etc/config/network
SVN-Revision: 29161
2011-11-15 18:21:00 +00:00
John Crispin 79a4642b40 lantiq: fix falcon build breakage
dev-wifi-rt2x00 fails to build on falcon due to missing pci

SVN-Revision: 29129
2011-11-14 18:55:58 +00:00
Gabor Juhos f27548448b ar71xx: fix USB LED on the DB120 board
SVN-Revision: 29126
2011-11-14 17:43:15 +00:00
Gabor Juhos 6ebbb1329d ar71xx: add a function for selecting output signal on a given GPIO pin
SVN-Revision: 29125
2011-11-14 17:43:14 +00:00
Gabor Juhos 0c1d3617d7 ar71xx: fix GPIO function handling on AR934x
SVN-Revision: 29124
2011-11-14 17:43:13 +00:00
Gabor Juhos aa0c8c4885 ar71xx: add AR71XX_ prefix to GPIO_REG_* defines
SVN-Revision: 29123
2011-11-14 17:43:11 +00:00
Gabor Juhos 62a7795afd ar71xx: merge nand scan patch
SVN-Revision: 29122
2011-11-14 17:43:10 +00:00
Gabor Juhos 12dae96097 ar71xx: fix a compiler warning
SVN-Revision: 29110
2011-11-14 13:07:47 +00:00
Gabor Juhos 5ae0fd802c ar71xx: fix GPIO count for AR934x
SVN-Revision: 29109
2011-11-14 13:07:45 +00:00
Gabor Juhos e52269364a ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X
SVN-Revision: 29108
2011-11-14 11:49:53 +00:00
Gabor Juhos 3104d70552 ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling
SVN-Revision: 29107
2011-11-14 11:49:51 +00:00
Gabor Juhos 42e8ae09b5 ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines
SVN-Revision: 29106
2011-11-14 11:49:49 +00:00
Gabor Juhos c15caea360 ar71xx: add an irq parameter for ar724x_pcibios_init
SVN-Revision: 29105
2011-11-14 11:49:47 +00:00
Gabor Juhos cf90b24bb9 ar71xx: remove hardwired interface parameters from mach-* files
SVN-Revision: 29103
2011-11-14 07:38:09 +00:00
Gabor Juhos defc79cb40 ar71xx: force hardwired interface parameters in ar71xx_add_device_eth
SVN-Revision: 29102
2011-11-14 07:38:07 +00:00
Gabor Juhos 6f4bc1ce37 ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth
SVN-Revision: 29101
2011-11-14 07:38:05 +00:00
Florian Fainelli 7f787707de build images for Pirelli A226M (#10409)
SVN-Revision: 29045
2011-11-13 19:19:22 +00:00
Florian Fainelli 5dc2098448 register uart0 on DWV-S0 boards (#10409)
SVN-Revision: 29044
2011-11-13 19:19:18 +00:00
Florian Fainelli 56a96ba876 refresh 3.0 patches
SVN-Revision: 29043
2011-11-13 19:19:14 +00:00
Florian Fainelli 54da5cf11f refresh 2.6.39 patches
SVN-Revision: 29042
2011-11-13 19:19:10 +00:00
Florian Fainelli 717a4391d7 rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch
SVN-Revision: 29041
2011-11-13 19:19:05 +00:00
Florian Fainelli c093c9df34 fix typo, load ip17xx switch module
SVN-Revision: 29039
2011-11-13 18:41:26 +00:00
Gabor Juhos 368bbc510b ar71xx: enable has_gbit flag on AR724{0,1}
SVN-Revision: 29026
2011-11-13 17:36:36 +00:00
Gabor Juhos 15d7016c9f ar71xx: fixup onboard PCIe chip registration on the DB120 board
SVN-Revision: 29022
2011-11-13 12:48:03 +00:00
Gabor Juhos f623066e60 ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed
SVN-Revision: 29021
2011-11-13 12:48:01 +00:00
Gabor Juhos d2316b2a45 ar71xx: ag71xx: add support for getting switch port link status
SVN-Revision: 29017
2011-11-13 11:27:04 +00:00
Gabor Juhos d0db89133c ar71xx: remove mii_ctrl resources of the ethernet devices
SVN-Revision: 29016
2011-11-13 11:27:03 +00:00
Gabor Juhos 34015ed6e8 ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx
SVN-Revision: 29015
2011-11-13 11:27:01 +00:00
Gabor Juhos 2d882cff23 ar71xx: ag71xx: remove unused mii_cfg related functions and defines
SVN-Revision: 29014
2011-11-13 11:27:00 +00:00
Gabor Juhos 538a9493b9 ar71xx: set MII interface speed from the set_speed callbacks
SVN-Revision: 29013
2011-11-13 11:26:59 +00:00
Gabor Juhos 93cd46be13 ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data
Also rename the corresponding callback functions.

SVN-Revision: 29012
2011-11-13 11:26:57 +00:00
Gabor Juhos 9579bb4267 ar71xx: ag71xx: remove MII interface setup code
SVN-Revision: 29011
2011-11-13 11:26:56 +00:00
Gabor Juhos da64ce8603 ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode
SVN-Revision: 29010
2011-11-13 11:26:54 +00:00
Gabor Juhos 0112153a0e ar71xx: fix occasional kernel hangs during boot on AR934x
The patch taken from the linux-mips mailing list.

The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.

This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.

SVN-Revision: 29009
2011-11-13 11:26:52 +00:00
Gabor Juhos 1afc76ea13 ar71xx: refresh kernel patches
SVN-Revision: 29008
2011-11-13 11:26:51 +00:00
Jonas Gorski d8acb75009 linux: update 3.1 to 3.1.1
SVN-Revision: 29007
2011-11-13 10:48:05 +00:00
John Crispin a8797d0de6 lantiq: add uci-defaults code for handling leds
SVN-Revision: 29004
2011-11-12 23:40:21 +00:00
John Crispin 832e02cd77 lantiq: add /lib/lantiq.sh and make hotplug handlers use it
SVN-Revision: 29003
2011-11-12 23:40:16 +00:00
John Crispin 5dcbbf0160 lantiq: rename leds
SVN-Revision: 29002
2011-11-12 23:40:12 +00:00
John Crispin d84b7596d9 lantiq: split compat headers out of bsp header patch
SVN-Revision: 29001
2011-11-12 23:40:07 +00:00
John Crispin 2cff80f015 lantiq: adds hotplug handler for loading rt2x00 firmware
SVN-Revision: 29000
2011-11-12 23:40:01 +00:00
John Crispin 3660c51c40 lantiq: adds hotplug handler for handling buttons and makes w303v work with it
SVN-Revision: 28999
2011-11-12 23:39:56 +00:00
John Crispin 4248705108 lantiq: cleanup default package selection
SVN-Revision: 28998
2011-11-12 23:39:51 +00:00
John Crispin eb20ab87e6 lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it
SVN-Revision: 28994
2011-11-12 18:41:15 +00:00
Gabor Juhos bbfaaeffd6 kernel: ar8216: add support for the AR8236 switch
SVN-Revision: 28993
2011-11-12 14:09:52 +00:00
Gabor Juhos ecb3690d0a kernel: ar8216: move port vlan setup into a separate function
SVN-Revision: 28992
2011-11-12 14:09:50 +00:00
Gabor Juhos 5ad763075e ar71xx: use the button for WPS control on the DB120
SVN-Revision: 28990
2011-11-12 12:50:20 +00:00
Gabor Juhos 4555be2bec ar71xx: register the second ethernet interface on the DB120 board
SVN-Revision: 28989
2011-11-12 12:50:19 +00:00
Gabor Juhos 368c6605a0 ar71xx: implement SoC specific phy interface setup
SVN-Revision: 28988
2011-11-12 12:50:18 +00:00
Gabor Juhos 21d317b9cc ar71xx: move phy interface setup into a separate function
SVN-Revision: 28987
2011-11-12 12:50:16 +00:00
Gabor Juhos aff0c84ffa ar71xx: register both MDIO bus on the DB120 board
SVN-Revision: 28986
2011-11-12 12:09:59 +00:00
Gabor Juhos b144249108 ar71xx: add AR934X specific MDIO registration code
SVN-Revision: 28985
2011-11-12 12:09:56 +00:00
Gabor Juhos f835106c8c ar71xx: add a secondary mdio bus
SVN-Revision: 28984
2011-11-12 12:09:54 +00:00
Gabor Juhos 90a42da270 ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_*
SVN-Revision: 28983
2011-11-12 12:09:50 +00:00
Gabor Juhos 9daa2149fd ar71xx: add an id argument to ar71xx_add_device_mdio
SVN-Revision: 28982
2011-11-12 12:09:48 +00:00
Gabor Juhos b07b687aec ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa
SVN-Revision: 28981
2011-11-12 12:09:42 +00:00
Gabor Juhos a9216bb76e ar71xx: add AR934x specific USB setup
SVN-Revision: 28980
2011-11-12 10:54:20 +00:00
Gabor Juhos 346e44105a ar71xx: register the first ethernet interface on the DB120 board
SVN-Revision: 28979
2011-11-12 10:54:18 +00:00
Gabor Juhos b1ba5e2f3d ar71xx: allow to register ethernet interfaces for AR934X
SVN-Revision: 28978
2011-11-12 10:54:17 +00:00
Gabor Juhos 2f9e535e89 ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered
SVN-Revision: 28977
2011-11-12 10:54:16 +00:00
Gabor Juhos e962b07c8b ar71xx: add AR934X specific bootstrap and reset register bits
SVN-Revision: 28976
2011-11-12 10:54:15 +00:00
Gabor Juhos d461fdd519 ar71xx: add diag support for the DB120 board
SVN-Revision: 28975
2011-11-12 10:54:10 +00:00
Gabor Juhos d8db8e94c8 ar71xx: fix GPIO direction setup for AR934x
SVN-Revision: 28974
2011-11-12 10:54:09 +00:00
Gabor Juhos 43e993e5f5 ar71xx: fix AR934X clock frequency calculation
SVN-Revision: 28973
2011-11-12 10:54:08 +00:00
Gabor Juhos 8687fc3e41 ar71xx: generate ubootenv from uci-defaults instead of providing defconfig
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28971
2011-11-12 10:54:04 +00:00
John Crispin fda4ee22a0 lantiq: improve falcon package selection
SVN-Revision: 28962
2011-11-11 21:59:11 +00:00
John Crispin e1dc73be90 lantiq: fix breakage introduced in 3.1 bump
SVN-Revision: 28961
2011-11-11 21:59:01 +00:00
Jo-Philipp Wich be49daffc8 base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli
SVN-Revision: 28933
2011-11-10 12:16:41 +00:00
Jonas Gorski f53128f79b target: linux: mtd: fix MTDREFRESH to an arbitrary high number
To make the ioctl number "stable", use an arbitrary high number to prevent
conflicts with new mtd ioctls that would push MTDREFRESH's number.

Also make mtd use the in-kernel mtd headers.

SVN-Revision: 28893
2011-11-09 21:16:36 +00:00
Felix Fietkau 7a2efd8c28 ar71xx: remove dead code
SVN-Revision: 28851
2011-11-08 00:33:20 +00:00
Felix Fietkau 94309039b7 ar71xx: on ar7240, exclude ports from their own port vlan destination mask
SVN-Revision: 28850
2011-11-08 00:33:15 +00:00
Felix Fietkau b06efd636a kernel: add a top level menuconfig option for enabling lockdep
SVN-Revision: 28848
2011-11-08 00:32:57 +00:00
Gabor Juhos 87704b8078 ar71xx: create TL-WA901ND network config from uci-defaults
SVN-Revision: 28833
2011-11-07 21:44:24 +00:00
Gabor Juhos 09fdfa444f ar71xx: create ALL0258N network config from uci-defaults
SVN-Revision: 28832
2011-11-07 21:44:23 +00:00
Gabor Juhos 63348f5fed ar71xx: create NBG{460N,550N,550NH} network config from uci-defaults
SVN-Revision: 28831
2011-11-07 21:44:20 +00:00
Gabor Juhos c3692c8331 ar71xx: create WZR-HP-G300NH network config from uci-defaults
SVN-Revision: 28830
2011-11-07 21:44:17 +00:00
Gabor Juhos ee1a07a11d ar71xx: create RB-493G network config from uci-defaults
SVN-Revision: 28829
2011-11-07 21:44:12 +00:00
Gabor Juhos d82d063d81 ar71xx: create TL-WR1043ND network config from uci-defaults
SVN-Revision: 28828
2011-11-07 21:44:11 +00:00
Gabor Juhos 68be590894 ar71xx: create WRT160NL network config from uci-defaults
SVN-Revision: 28827
2011-11-07 21:44:09 +00:00
Gabor Juhos 83901e47c9 ar71xx: create PB92 network config from uci-defaults
SVN-Revision: 28826
2011-11-07 21:44:08 +00:00
Gabor Juhos 22ab9fc9ad ar71xx: create DIR-825-B1 network config from uci-defaults
SVN-Revision: 28825
2011-11-07 21:44:07 +00:00
Gabor Juhos e866ba5753 ar71xx: create TL-WR{841N-v1,941ND} network config from uci-defaults
SVN-Revision: 28824
2011-11-07 21:44:03 +00:00
Gabor Juhos 9298c7afe5 ar71xx: create RB-450 network config from uci-defaults
SVN-Revision: 28823
2011-11-07 21:44:02 +00:00
Gabor Juhos ac256f97bd ar71xx: create RB-450G, RouterStation Pro network config from uci-defaults
SVN-Revision: 28822
2011-11-07 21:44:01 +00:00
Gabor Juhos 944ac3f6cf ar71xx: create RB-433{,U} network config from uci defaults
SVN-Revision: 28821
2011-11-07 21:43:58 +00:00
Gabor Juhos 6e8390ae6c ar71xx: create even more network configs from the uci-defaults script
Create the default network configuration dynamically for the
AR724x/AR9331 boards. Some other boards are using the same
configuration, so convert those as well.

SVN-Revision: 28820
2011-11-07 21:43:56 +00:00
Gabor Juhos b62560413a ar71xx: create more network configs from the uci-defaults script
Create the default network configuration dynamically for the boards with
swapped eth0, eth1 interfaces.

SVN-Revision: 28819
2011-11-07 21:43:54 +00:00
Gabor Juhos 6c92b26bac ar71xx: create a bunch of network configs from the uci-defaults script
Create the default network configuration dynamically for the boards with
a single ethernet interface.

SVN-Revision: 28818
2011-11-07 21:43:52 +00:00
Gabor Juhos 0a8e5dbf7b ar71xx: create generic network config from an uci-defaults script
SVN-Revision: 28817
2011-11-07 21:43:51 +00:00
Gabor Juhos 54c034ae7a ar71xx: remove AP81 defconfig, it is the same as the generic config
SVN-Revision: 28816
2011-11-07 21:34:33 +00:00
Gabor Juhos 5b6cc3eb9f ar71xx: change generated Buffalo firmware versions
With version 1.76 the upgrade may fail with newer Buffalo firmwares with
a message like this:
"You can not update the firmware because the firmware version is earlier
than 1.82. Please use 1.82 or later version for firmware update."

SVN-Revision: 28815
2011-11-07 21:34:32 +00:00
Imre Kaloz cc2cf8f3d5 update 3.1 patches
SVN-Revision: 28814
2011-11-07 21:13:13 +00:00
Imre Kaloz c4bc2552a3 update arm mach-types
SVN-Revision: 28813
2011-11-07 21:12:26 +00:00
Gabor Juhos eb9ef60e2d ar71xx: enable sysupgrade on the WHR-G301N and WHR-HP-GN boards
SVN-Revision: 28812
2011-11-07 20:25:00 +00:00
Gabor Juhos 8456840d82 ar71xx: wrap long lines in the upgrade script
SVN-Revision: 28811
2011-11-07 20:24:59 +00:00
Gabor Juhos c60baf78ce ar71xx: fix WHR-HP-G300N firmware partition offset
SVN-Revision: 28810
2011-11-07 20:24:57 +00:00
Gabor Juhos b27254a2c5 ar71xx: add default network configuration for the WHR-HP-GN
SVN-Revision: 28807
2011-11-07 13:32:43 +00:00
Gabor Juhos 034b2b7cde ar71xx: build image for the Buffalo WHR-HP-GN
SVN-Revision: 28806
2011-11-07 12:59:11 +00:00
Gabor Juhos a801d620a7 ar71xx: add support for the Buffalo WHR-HP-GN board
SVN-Revision: 28805
2011-11-07 12:59:10 +00:00
Gabor Juhos 0d9ae0a036 ar71xx: build image for the Buffalo WHR-G301N
SVN-Revision: 28804
2011-11-07 12:59:08 +00:00
Gabor Juhos 4509af17ed ar71xx: add support for the Buffalo WHR-G301N board
SVN-Revision: 28803
2011-11-07 12:59:07 +00:00
Gabor Juhos 63784ea2bc ar71xx: fix WHR-HP-G300N image generation
SVN-Revision: 28802
2011-11-07 12:59:05 +00:00
Gabor Juhos b3b21cb3bf ar71xx: enable WHR-HP-G300N support in kernel config
SVN-Revision: 28801
2011-11-07 12:59:04 +00:00
Gabor Juhos 4aace1e2e3 ar71xx: fix WHR-HP-G300N MTD partitions
SVN-Revision: 28800
2011-11-07 12:59:03 +00:00
Michael Büsch 05ce57c005 omap24xx: Add cbus tahvo locking fix.
SVN-Revision: 28767
2011-11-05 16:10:18 +00:00
Michael Büsch 6288ac7ed4 omap24xx: Fix n810bm compilation
SVN-Revision: 28766
2011-11-05 16:01:53 +00:00
Gabor Juhos 297ac9a7f1 kernel: swconfig: add a missing unlock in error path
SVN-Revision: 28753
2011-11-04 14:38:31 +00:00
Jo-Philipp Wich d6f02b62d4 add timeserver config to target specific system configs as well
SVN-Revision: 28750
2011-11-04 12:53:35 +00:00