hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
21,380 Commits
5 Branches
29 Tags
202 MiB
Commit Graph

8737 Commits (968ac3fd03e567b47259ff47d7d9ba6d73ac6f05)

Author SHA1 Message Date
Gabor Juhos 9217115687 generic: rtl8366_smi: rename debugfs Kconfig symbol 
SVN-Revision: 31915
 2012-05-27 17:09:43 +00:00
Gabor Juhos 466ef30173 generic: rtl8367: allow to use VLANs > 31 
SVN-Revision: 31914
 2012-05-27 17:09:41 +00:00
John Crispin f567980d38 move files-3.3 -> files 
SVN-Revision: 31912
 2012-05-27 16:13:02 +00:00
John Crispin 8002770520 3.2 R.I.P. 
SVN-Revision: 31911
 2012-05-27 16:12:59 +00:00
John Crispin 81ddc886e1 dgn3500 support with eeprom loading from sysfs 
WIFI eeprom:
As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules.  I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data.

SPI flash:
It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above.
I've kept the original mtd partitioning that Netgear uses.

Buttons/LED:
Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working.
The green wifi led is connected to an unknown atheros gpio.

Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com>

SVN-Revision: 31910
 2012-05-27 16:02:22 +00:00
John Crispin 6e8fe84472 fixes zyxel p2601hnfx 
moves the linux partition, removes the config partition and the
buttons settings have small adjustments.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31909
 2012-05-27 16:02:20 +00:00
John Crispin 3f2f50c681 Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values. 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31908
 2012-05-27 16:02:16 +00:00
Felix Fietkau 51bc47ce7c kernel: properly pad the allocated headroom in skb_cow to NET_SKB_PAD 
SVN-Revision: 31906
 2012-05-27 15:16:37 +00:00
Gabor Juhos 0b8c1c8dfb linux/3.2: R.I.P. 
SVN-Revision: 31905
 2012-05-27 15:01:37 +00:00
Gabor Juhos 20ba6d90e3 xburst: remove support for old kernels 
SVN-Revision: 31904
 2012-05-27 15:01:35 +00:00
Gabor Juhos d043cb2c34 xburst: switch to 3.3 and add broken flag 
SVN-Revision: 31903
 2012-05-27 15:01:33 +00:00
Gabor Juhos 9a26e9f843 xburst: add support for 3.3 
SVN-Revision: 31902
 2012-05-27 15:01:32 +00:00
Gabor Juhos 9dd7a6d9e2 ppc44x: remove 3.2 support 
SVN-Revision: 31901
 2012-05-27 15:01:30 +00:00
Gabor Juhos 05d74942b1 ppx44x: switch to 3.3 and add broken flag 
SVN-Revision: 31900
 2012-05-27 15:01:28 +00:00
Gabor Juhos 9300e0496c ppc44x: add support for 3.3 
Compile tested only.

SVN-Revision: 31899
 2012-05-27 15:01:27 +00:00
Gabor Juhos c50f1f7536 cobalt: switch to 3.3 and add broken flag 
Compile tested only.

SVN-Revision: 31898
 2012-05-27 15:01:26 +00:00
Gabor Juhos 471cf87ff0 ep93xx: remove 3.2 support 
SVN-Revision: 31897
 2012-05-27 15:01:24 +00:00
Gabor Juhos 400b9b5b87 ep93xx: switch to 3.3 and add broken flag 
SVN-Revision: 31896
 2012-05-27 15:01:23 +00:00
Gabor Juhos 7501f2364f ep93xx: add support for 3.3 
Compile tested only.

SVN-Revision: 31895
 2012-05-27 15:01:21 +00:00
Gabor Juhos 907e88a37f au1000: remove 3.2 support 
SVN-Revision: 31894
 2012-05-27 15:01:18 +00:00
Gabor Juhos fbe10e73c6 au1000: switch to 3.3 and add broken flag 
SVN-Revision: 31893
 2012-05-27 15:01:17 +00:00
Gabor Juhos e065d5cfbe au1000: add support for 3.3 
Compile tested only.

SVN-Revision: 31892
 2012-05-27 15:01:15 +00:00
Gabor Juhos de4c4d35e1 linux/3.1: R.I.P. 
SVN-Revision: 31891
 2012-05-27 15:01:09 +00:00
Gabor Juhos cead4b47ab omap24xx: remove 3.1 support 
SVN-Revision: 31890
 2012-05-27 15:01:07 +00:00
Gabor Juhos 7a4db11fbb omap24xx: switch to 3.3 and add broken flag 
SVN-Revision: 31889
 2012-05-27 15:01:05 +00:00
Gabor Juhos d004168445 cns3xxx: remove 3.1 support 
SVN-Revision: 31888
 2012-05-27 15:01:03 +00:00
Gabor Juhos 6f2ca5da39 cns3xxx: switch to 3.3 and add broken flag 
SVN-Revision: 31887
 2012-05-27 15:01:02 +00:00
Felix Fietkau 6f89cffc9a kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance with mac80211 based drivers 
SVN-Revision: 31886
 2012-05-27 14:43:58 +00:00
Jonas Gorski ec7786c2ec bcm63xx: build images for DSL-274XB revision F1 
Build images for D-Link DSL-274XB revision F1. Flashing
through original web UI as well as CFE works.

Known issues:
  * wifi led inverted (on when wifi is off and vice cersa)
  * same issues as generic bcm6328 support

SVN-Revision: 31885
 2012-05-27 13:22:51 +00:00
Jonas Gorski 8aac009cc9 bcm63xx: add ath9k to atheros wifi profile 
SVN-Revision: 31884
 2012-05-27 13:22:48 +00:00
Jonas Gorski 4aa43122ab bcm63xx: enable bcm6328 support and required drivers 
BCM6328 support is in a usable state, with the following issues

 * internal switch port not configurable
 * external phys not supported
 * broadcom wifis will probably not work correctly
 * and all other generic bcm63xx issues (so yes, still no ADSL)

SVN-Revision: 31883
 2012-05-27 13:22:46 +00:00
Jonas Gorski e5575fe335 bcm63xx: add support for DSL-274XB rev F1 
SVN-Revision: 31882
 2012-05-27 13:22:43 +00:00
Jonas Gorski a7a82db16f bcm63xx: fix port state after network down 
bcm_enetsw_probe did not properly reset port states, resulting in
connected ports staying disabled after bringing up the interface the
second time.

SVN-Revision: 31881
 2012-05-27 13:22:40 +00:00
Jonas Gorski e19ed52fd1 bcm63xx: add a fixup for ath9k devices 
SVN-Revision: 31880
 2012-05-27 13:22:37 +00:00
Jonas Gorski e34018cc9e bcm63xx: add support for the HSSPI controller 
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.

SVN-Revision: 31879
 2012-05-27 13:22:33 +00:00
Jonas Gorski 099d5eec06 bcm63xx: add preliminary support for bcm6328 
SVN-Revision: 31878
 2012-05-27 13:22:29 +00:00
Jonas Gorski 7dbb132c88 bcm63xx: add flash type detection 
SVN-Revision: 31877
 2012-05-27 13:22:25 +00:00
Jonas Gorski b0ffeb0021 bcm63xx: pad Speedport W303 V images to 4 MiB 
Prevents CFE from flashing to the second image offset. Fix up the rootfs
length on first boot else CFE will complain.

SVN-Revision: 31876
 2012-05-27 13:22:22 +00:00
Jonas Gorski 226b030e44 bcm63xx: add a default switch configuration for DSL-274XB 
SVN-Revision: 31874
 2012-05-27 13:22:17 +00:00
Jonas Gorski db1ff5c6fa bcm63xx: setup network config through uci-defaults 
SVN-Revision: 31873
 2012-05-27 13:22:14 +00:00
Jonas Gorski 72b4fdecc9 bcm63xx: move the board name workaround to /lib/brcm63xx.sh 
SVN-Revision: 31872
 2012-05-27 13:22:11 +00:00
Jonas Gorski dd37687de0 bcm63xx: use the exact board id as board identification string 
No need to keep the bcm63xx/ at the start or the chipid info at the end.

SVN-Revision: 31871
 2012-05-27 13:22:08 +00:00
Felix Fietkau 230c0eb2cb kernel: fix a warning in the connmark module 
SVN-Revision: 31856
 2012-05-24 18:25:08 +00:00
Gabor Juhos 2ae5581447 kernel: update linux 3.3 to 3.3.7 
SVN-Revision: 31848
 2012-05-23 21:05:32 +00:00
Gabor Juhos c57409e79d ar71xx: fix an insignificant typo 
Patch from #11485.

SVN-Revision: 31847
 2012-05-23 21:05:30 +00:00
Gabor Juhos 013f434f5b ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD 
Patch by Kamil Trzciński <ayufan@osk-net.pl>

SVN-Revision: 31846
 2012-05-23 21:05:25 +00:00
Gabor Juhos 758f670376 ar71xx: add support for TP-Link TL-MR3040 
Support for TP-Link TL-MR3040. Power LED not working - always on red, after
start should be green.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 31845
 2012-05-23 21:05:24 +00:00
Gabor Juhos e4720dfa95 ramips: Add byte queue limits support to net/ethernet/ramips_main.c 
Add byte queue limits support to net/ethernet/ramips_main.c

"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31844
 2012-05-23 21:05:23 +00:00
Gabor Juhos 1d286fd755 ramips: Enable sysupgrade for Sitecom WL-351 
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31843
 2012-05-23 21:05:22 +00:00
Gabor Juhos 1e1c0a5405 linux/3.3: avoid recursive calling of mtd_writev in the block2mtd driver 
Should fix #11513. Tested with the x86/generic squashfs image within a VM.

SVN-Revision: 31841
 2012-05-23 21:05:19 +00:00
Felix Fietkau 9037c2ccc6 lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520 
SVN-Revision: 31835
 2012-05-20 21:58:03 +00:00
Felix Fietkau ce59af117c kernel: merge a net-next fq_codel backlog handling fix 
SVN-Revision: 31813
 2012-05-18 22:12:15 +00:00
Gabor Juhos 02c2f449d7 omap24xx: add support for 3.3 
Compile tested only.

SVN-Revision: 31810
 2012-05-18 20:22:32 +00:00
Gabor Juhos c2a2d59db5 cns3xxx: add support for 3.3 
Compile tested only.

SVN-Revision: 31809
 2012-05-18 20:10:53 +00:00
Gabor Juhos 1fd4bf270b linux/2.6.39: R.I.P. 
SVN-Revision: 31808
 2012-05-18 20:10:51 +00:00
Gabor Juhos 05c0d8b28e cns3xxx: sync kernel config 
SVN-Revision: 31807
 2012-05-18 20:10:48 +00:00
Gabor Juhos 9718f03e24 cns3xxx: remove 2.6.39 support 
SVN-Revision: 31806
 2012-05-18 20:10:46 +00:00
Gabor Juhos 9e78becbac cns3xxx: switch to 3.1 
Compile tested only.

SVN-Revision: 31805
 2012-05-18 20:10:44 +00:00
Gabor Juhos 07b5a3eea2 x86: remove support for old kernels 
SVN-Revision: 31804
 2012-05-18 20:10:42 +00:00
Gabor Juhos 604e3aac0a x86: remove subtarget specific LINUX_VERSION overrides 
SVN-Revision: 31803
 2012-05-18 20:10:38 +00:00
Gabor Juhos d9dab97d38 x86/ep80579: switch to 3.3 
Also fix build errors in the ep80579-drivers package.
Compile tested only.

SVN-Revision: 31802
 2012-05-18 20:10:33 +00:00
Hauke Mehrtens c63ef04874 brcm47xx: fix nvram read out on devices with serial flash 
detect nvram on Linksys E3200

SVN-Revision: 31790
 2012-05-18 16:04:10 +00:00
Hauke Mehrtens 7ad663dda6 brcm47xx: bcma: fix null pointer 
SVN-Revision: 31789
 2012-05-18 15:46:30 +00:00
Hauke Mehrtens b4ecf522cd brcm47xx: ssb: recognize ARM Cortex M3 
SVN-Revision: 31788
 2012-05-18 15:45:51 +00:00
Hauke Mehrtens 7be88d2ad8 brcm47xx: some fixes for the USB driver 
SVN-Revision: 31787
 2012-05-18 15:44:25 +00:00
Gabor Juhos e3678eb33e cobalt: remove 2.6.39 specific patches 
SVN-Revision: 31785
 2012-05-18 09:59:22 +00:00
Gabor Juhos a5de52c244 x86/olpc: switch to 3.3 
Compile tested only.

SVN-Revision: 31784
 2012-05-18 09:57:32 +00:00
Gabor Juhos 9e54e012d6 x86: image: select bootscript images by default for OLPC 
SVN-Revision: 31783
 2012-05-18 09:57:29 +00:00
Felix Fietkau 3f62f5211a adm5120: add missing config symbols for the rb1xx subtarget, fixes #11407 
SVN-Revision: 31781
 2012-05-17 21:20:23 +00:00
Felix Fietkau 03babf3641 target: add a feature flag for RTC support 
SVN-Revision: 31777
 2012-05-17 15:28:09 +00:00
Hauke Mehrtens c30405070c kernel: add some missing config options added by r31756 
SVN-Revision: 31774
 2012-05-17 13:28:30 +00:00
Hauke Mehrtens 273797f15a kernel: ssb/bcma: update to version from wireless-testing tag master-2012-05-16-2 
SVN-Revision: 31772
 2012-05-17 13:22:38 +00:00
Hauke Mehrtens 3491d8c017 brcm47xx: remove support for kernel 3.2 
SVN-Revision: 31771
 2012-05-17 13:20:10 +00:00
Gabor Juhos 562e468ae5 x86/thincan: switch to 3.3 
Compile tested only.

SVN-Revision: 31765
 2012-05-17 06:41:01 +00:00
Gabor Juhos 1f7f8376a6 x86/xen_domu: switch to 3.3 
Compile tested only.

SVN-Revision: 31764
 2012-05-17 06:41:00 +00:00
Gabor Juhos 8bb7ddecfd x86/kvm_guest: switch to 3.3 
Compile tested only.

SVN-Revision: 31763
 2012-05-17 06:40:58 +00:00
Gabor Juhos f14d1a588d x86/generic: switch to 3.3 
Compile tested only.

SVN-Revision: 31762
 2012-05-17 06:40:56 +00:00
Felix Fietkau 54edbfabac kernel: add codel and fq_codel to generic 3.3 patch set (based on patch by Dave Täht) 
Codel is a new AQM algorithm and RED replacement designed by
Kathie Nichols and Van Jacobson, and published in ACM queue:

http://queue.acm.org/detail.cfm?id=2209336

Codel stands for "Controlled Delay", and needs no knobs in the
general case, twiddled, for optimum results. It aims for 5ms of
delay, at most, when in use.

Additionally,

fq_codel (by eric dumazet) builds on codel to provide fair queuing
superior to what could be had with SFQ, and drop behavior saner
than RED, BLUE, or choke.

These patches are backported from net-next and are known to work
on Linux 3.3.4 and later.

Includes updates to codel for better portability and speed

SVN-Revision: 31756
 2012-05-16 15:23:03 +00:00
Gabor Juhos eb2fe5e863 x86/alix2: switch to 3.3 
Compile tested only.

SVN-Revision: 31753
 2012-05-16 10:45:02 +00:00
Gabor Juhos fb7da5bbde x86/net5501: switch to 3.3 
Compile tested only.

SVN-Revision: 31752
 2012-05-16 10:44:59 +00:00
Gabor Juhos 9e049ce25c x86: sync 3.3 configs 
SVN-Revision: 31751
 2012-05-16 10:44:55 +00:00
Gabor Juhos 19f691f8e4 x86: sync 3.2 configs 
SVN-Revision: 31750
 2012-05-16 10:44:52 +00:00
Gabor Juhos 724fd5e657 x86: sync 2.6.39 configs 
SVN-Revision: 31749
 2012-05-16 10:44:49 +00:00
Gabor Juhos 637fd23428 linux/3.3: add missing symbol 
SVN-Revision: 31748
 2012-05-16 10:44:46 +00:00
Gabor Juhos 67675fd48d linux: add CONFIG_POWER_SUPPLY_DEBUG symbol 
It was missing in the previous commit.

SVN-Revision: 31738
 2012-05-15 11:12:31 +00:00
Gabor Juhos 39994008cb linux: move certain disabled symbols to the generic configs 
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
 2012-05-15 10:58:52 +00:00
Felix Fietkau a3f2fd187b ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet) 
SVN-Revision: 31736
 2012-05-15 10:36:39 +00:00
John Crispin 364f47e454 code style cleanup of the mach files 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31735
 2012-05-15 09:38:05 +00:00
John Crispin 07dca108a9 adds zyxel p2601hnfx support 
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31734
 2012-05-15 09:38:02 +00:00
John Crispin 9785ec070e set 3.3.6 as default 
SVN-Revision: 31733
 2012-05-15 09:37:59 +00:00
John Crispin c61ada1db8 set 3.3.5 as default 
SVN-Revision: 31718
 2012-05-14 16:11:26 +00:00
Gabor Juhos 2fceae7ec4 linux/3.0: R.I.P. 
It is used by the broken omap35xx/gumstix target only.

SVN-Revision: 31717
 2012-05-14 15:48:34 +00:00
Gabor Juhos a3d349a3b3 realview: remove 3.0 support 
SVN-Revision: 31716
 2012-05-14 15:48:32 +00:00
Gabor Juhos e2ecabd761 realview: switch to 3.3 
SVN-Revision: 31715
 2012-05-14 15:48:31 +00:00
Gabor Juhos 46c7d58726 realview: add 3.3 support 
SVN-Revision: 31714
 2012-05-14 15:48:29 +00:00
Gabor Juhos 8f629f2a22 linux/3.3: more missing config symbols 
SVN-Revision: 31713
 2012-05-14 15:48:23 +00:00
Felix Fietkau fab5ee9566 imagebuilder: explicitly install the kernel .ipk before installing anything else, it is no longer part of the package index (fixes #11450) 
SVN-Revision: 31711
 2012-05-14 14:00:01 +00:00
Hauke Mehrtens a798a81890 kernel: add CONFIG_BLK_DEV_PCIESSD_MTIP32XX 
SVN-Revision: 31710
 2012-05-14 11:28:02 +00:00
Gabor Juhos b472e5d12e kernel: update linux 3.3 to 3.3.6 
SVN-Revision: 31709
 2012-05-14 09:18:32 +00:00
Hauke Mehrtens 679b6a0722 amazon: fix section mismatch 
SVN-Revision: 31707
 2012-05-13 15:31:42 +00:00
Hauke Mehrtens abd74f86b4 amazon: update amazon target to kernel 3.3 
This is just compile tested, my device is currently not working.

SVN-Revision: 31706
 2012-05-13 15:10:40 +00:00
Gabor Juhos 60d3ffb49a gemini: remove 2.6.37 support 
SVN-Revision: 31700
 2012-05-13 12:04:04 +00:00
Gabor Juhos 672ff3de6e gemini: switch to 3.3 
SVN-Revision: 31699
 2012-05-13 12:04:02 +00:00
Gabor Juhos d0ac4c1f03 gemini: add support for 3.3 
SVN-Revision: 31698
 2012-05-13 12:03:59 +00:00
Hauke Mehrtens 482b99a660 brcm47xx: generate image for Linksys WRT610N V1 
SVN-Revision: 31696
 2012-05-13 00:16:57 +00:00
Hauke Mehrtens 31c2c485c1 kernel: ssb: add PCI IDs 0x4322 and 43222 
The 0x4322 ID is found on the BCM4322 used on some SoCs like the
Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID
is found on the BCM43222 used on some other SoCs like the D-Link
DSL-2760U connected to a BCM63xx.

This fixes #10887.

SVN-Revision: 31695
 2012-05-13 00:08:12 +00:00
Hauke Mehrtens 5acb0b72be brcm47xx: fix tg3 ssb patch 
Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again).

SVN-Revision: 31694
 2012-05-12 23:59:12 +00:00
Gabor Juhos e710aeeab1 linux/2.6.38: R.I.P. 
It is used only by the broken coldfire target.

SVN-Revision: 31688
 2012-05-12 12:05:21 +00:00
Gabor Juhos 08ed044595 linux/2.6.37: R.I.P. 
SVN-Revision: 31687
 2012-05-12 12:05:19 +00:00
Gabor Juhos c8cede6aa7 linux: add broken flag to remaining targets which are using 2.6.37 
SVN-Revision: 31686
 2012-05-12 12:05:18 +00:00
Gabor Juhos a2efef024e iop32x: remove 2.6.37 support 
SVN-Revision: 31685
 2012-05-12 10:49:36 +00:00
Gabor Juhos a5d4de7da2 iop32x: switch to 3.3 
It is compile tested only, so add a broken flag.

SVN-Revision: 31684
 2012-05-12 10:49:34 +00:00
Gabor Juhos 598fe0e93b iop32x: add 3.3 support 
SVN-Revision: 31683
 2012-05-12 10:49:32 +00:00
Gabor Juhos bf8e96712e sibyte: remove 2.6.37 support 
SVN-Revision: 31682
 2012-05-12 10:49:30 +00:00
Gabor Juhos edb129bb24 sibyte: switch to 3.3 
It is compile tested only, so add a broken flag.

SVN-Revision: 31681
 2012-05-12 10:49:28 +00:00
Gabor Juhos fd651daa4b sibyte: add 3.3 support 
SVN-Revision: 31680
 2012-05-12 10:49:26 +00:00
Gabor Juhos 4f6acae5f7 ixp4xx: fix ixp4xx_crypto build error 
SVN-Revision: 31679
 2012-05-12 10:49:23 +00:00
Gabor Juhos cabfa5b364 orion: remove the broken broken flag 
It is working on the Linksys WRT350N v2 at least:
http://pastebin.com/KCAbJZs9

Additionally, the flag was added to a wrong place
so it had no effect.

Thanks to StrikerNL for testing.

SVN-Revision: 31674
 2012-05-10 20:20:43 +00:00
Gabor Juhos ec27c35ebe kirkwood: fix Kconfig symbol for NSA-310 
SVN-Revision: 31673
 2012-05-09 16:16:52 +00:00
John Crispin dc4cfd3a64 Add 3.3 config files 
SVN-Revision: 31672
 2012-05-09 12:52:24 +00:00
John Crispin 75827c538d Add missing 3.3 patches 
SVN-Revision: 31671
 2012-05-09 12:52:21 +00:00
John Crispin 7d638fbb2f Drop 2.6.32 support 
SVN-Revision: 31670
 2012-05-09 12:52:19 +00:00
Gabor Juhos 200227e0b4 kirkwood: add support for the ZyXEL NSA-310 
SVN-Revision: 31669
 2012-05-09 11:38:43 +00:00
Gabor Juhos 213cbf4297 kirkwood: add RaidSonic ICY BOX IB-NAS62x0 board support 
Based on a patch by Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31668
 2012-05-09 11:38:41 +00:00
Gabor Juhos d4876692c1 kirkwood: enable GPIO sysfs interface 
SVN-Revision: 31667
 2012-05-09 11:38:40 +00:00
Gabor Juhos d1eed108bb kirkwood: nuke 2.6.37 support 
SVN-Revision: 31666
 2012-05-09 11:38:39 +00:00
Gabor Juhos 861b9b25e0 kirkwood: switch to 3.3 
SVN-Revision: 31665
 2012-05-09 11:38:37 +00:00
Gabor Juhos b272041998 kirkwood: add 3.3 support 
Based on the 3.2.9 patches by Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31664
 2012-05-09 11:38:36 +00:00
Gabor Juhos 500ec36515 ixp4xx: nuke 2.6.37 support 
SVN-Revision: 31663
 2012-05-09 10:48:44 +00:00
Gabor Juhos d25a4e7ddc ixp4xx: switch to 3.3 
SVN-Revision: 31662
 2012-05-09 10:48:43 +00:00
Gabor Juhos d5093de0b1 mpc85xx: remove 2.6.38 support 
SVN-Revision: 31661
 2012-05-09 10:48:41 +00:00
Gabor Juhos ab71a428c5 mpc85xx: switch to 3.3 and add broken flag 
It is compile tested only.

SVN-Revision: 31660
 2012-05-09 10:48:39 +00:00
Gabor Juhos db376b45d9 orion: nuke 3.0 support 
SVN-Revision: 31659
 2012-05-09 10:48:38 +00:00
Gabor Juhos 24e2385a59 orion: switch to 3.3 and add broken flag 
It is compile tested only.

SVN-Revision: 31658
 2012-05-09 10:48:37 +00:00
Gabor Juhos d640a15b73 linux/3.3: add missing RTC symbol 
SVN-Revision: 31654
 2012-05-09 10:48:30 +00:00
Gabor Juhos 93c9980b94 ar71xx: fix build error if PCI is disabled 
SVN-Revision: 31646
 2012-05-07 21:16:22 +00:00
Gabor Juhos 34018a630f kernel: update linux 3.3 to 3.3.5 
SVN-Revision: 31645
 2012-05-07 20:11:43 +00:00
Gabor Juhos 6b5012ce1f pxa: remove 2.6.37 support 
SVN-Revision: 31643
 2012-05-07 17:40:15 +00:00
Gabor Juhos 1f1fd8616f pxa: switch to 3.3 and mark it as broken 
It is working in qemu, but it has not been tested on real hardware.

SVN-Revision: 31642
 2012-05-07 17:40:09 +00:00
Gabor Juhos b284c0e804 pxa: add support for 3.3 
SVN-Revision: 31641
 2012-05-07 17:40:06 +00:00
Jo-Philipp Wich 1a01559520 atheros: Fix compilation 
With our recent switch to the 3.3 kernel target, some headers were
occidentally omitted.

Signed-off-by: Jonathan Bither <jonbither@gmail.com>

SVN-Revision: 31640
 2012-05-07 17:06:39 +00:00
Jonas Gorski b218b15709 bcm63xx: fix a race between PCI bus scan and fallback sprom registration 
The fallback sprom handler was installed too late, resulting in ssb
failing to get a valid sprom on some devices.

Fixes #11384.

SVN-Revision: 31638
 2012-05-06 21:25:34 +00:00
Felix Fietkau 0ff3c396d3 kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes 
SVN-Revision: 31637
 2012-05-06 21:19:14 +00:00
Hauke Mehrtens d30f8da466 brcm47xx: add gpio_request_one() 
This fixes a compile error with kernel 3.3.

SVN-Revision: 31635
 2012-05-06 20:44:37 +00:00
Felix Fietkau 7799c88aa4 atheros: clean up the patches some more 
SVN-Revision: 31626
 2012-05-06 17:15:00 +00:00
Felix Fietkau 9b20187ad5 atheros: update to 3.3.4 (based on work by acoul), fix mvswitch driver for newer kernels 
SVN-Revision: 31625
 2012-05-06 17:08:30 +00:00
Jonas Gorski 30362b90af AR7: don't mark as broken 
Linux 3.3.4 boots fine on my AR7 device.

SVN-Revision: 31623
 2012-05-06 14:04:19 +00:00
Gabor Juhos 28e897845f ar7: remove 2.6.37 support 
SVN-Revision: 31617
 2012-05-05 17:32:43 +00:00
Gabor Juhos 047a51c4fd ar7: switch to 3.3 and mark the target as broken 
SVN-Revision: 31616
 2012-05-05 17:32:41 +00:00
Gabor Juhos dd884a6b73 ar7: add 3.3 support 
SVN-Revision: 31615
 2012-05-05 17:32:39 +00:00
Gabor Juhos e85a44f11b ar7: fix kernel_entry extraction 
SVN-Revision: 31614
 2012-05-05 17:32:36 +00:00
Gabor Juhos 9486904079 ar71xx: add profile and build image for the TL-WR1041N v2 board 
Patch-by: Vince Huang <axishero@foxmail.com>

SVN-Revision: 31610
 2012-05-05 17:02:41 +00:00
Gabor Juhos ab897ab04e ar71xx: add support for the TP-Link TL-WR1041N v2 board 
Patch-by: Vince Huang <axishero@foxmail.com>

SVN-Revision: 31608
 2012-05-05 17:02:35 +00:00
Gabor Juhos 56f2e08537 ar71xx: update 3.3 patches 
SVN-Revision: 31602
 2012-05-05 13:56:35 +00:00
Gabor Juhos 8fffc6d6df ar71xx: fix a typo in the db120 mach file 
Reported-by: Sven Eckelmann <sven@narfation.org>

SVN-Revision: 31601
 2012-05-05 13:56:30 +00:00
Hauke Mehrtens 8c352ff853 brcm47xx: update target to kernel 3.3 
SVN-Revision: 31599
 2012-05-05 12:53:37 +00:00
Gabor Juhos 2e3f8c480e linux/2.6.32: R.I.P. 
SVN-Revision: 31597
 2012-05-05 11:43:34 +00:00
Gabor Juhos e005aed223 rdc: remove 2.6.32 support 
SVN-Revision: 31596
 2012-05-05 11:43:32 +00:00
Gabor Juhos 0e086cfaf7 rdc: switch to 3.3 and mark the target as broken 
SVN-Revision: 31595
 2012-05-05 11:43:30 +00:00
Gabor Juhos 787b253859 rb532: remove 2.6.32 support 
SVN-Revision: 31594
 2012-05-05 11:43:29 +00:00
Gabor Juhos 63a532a472 rb532: switch to 3.3 and mark the target broken 
SVN-Revision: 31593
 2012-05-05 11:43:26 +00:00
Gabor Juhos b120e7f22a rb532: add 3.3 support 
SVN-Revision: 31592
 2012-05-05 11:43:23 +00:00
Gabor Juhos 6caa1aab10 mpc83xx: remove broken flag 
SVN-Revision: 31591
 2012-05-05 11:43:21 +00:00
Gabor Juhos 257a201b56 mpc83xx: populate network config from an uci-default script 
SVN-Revision: 31590
 2012-05-05 11:43:19 +00:00
Gabor Juhos 13ce8f8a77 mpc83xx: cleanup rb333.dts 
SVN-Revision: 31589
 2012-05-05 11:43:16 +00:00
Gabor Juhos a3d9877518 mpc83xx: fix MAC addresses on the RB333 
SVN-Revision: 31588
 2012-05-05 11:43:13 +00:00
Gabor Juhos 1a5a9c5dae mpc83xx: fix build warnings in RB333/600 dtb wrappers 
SVN-Revision: 31587
 2012-05-05 11:43:10 +00:00
Gabor Juhos 7ffa3fe02c linux/2.6.32: fix layer7 patch 
SVN-Revision: 31586
 2012-05-05 07:20:13 +00:00
Imre Kaloz 9a91dc9f71 upgrade to 3.3, enable framebuffer 
SVN-Revision: 31576
 2012-05-03 21:51:58 +00:00
Jonas Gorski b393464fb4 adm5120: add missing NULL terminator to partition parser list 
Fixes #11372.

SVN-Revision: 31574
 2012-05-03 21:03:50 +00:00
Hauke Mehrtens 22b2e3fbb9 brcm47xx: add support for kernel 3.3 
SVN-Revision: 31573
 2012-05-03 20:18:41 +00:00
Gabor Juhos 3349cf2691 Fix iptables abuse of kernel header files. Use exported headers instead. 
[juhosg: export xt_layer7.h for all kernel versions]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

SVN-Revision: 31566
 2012-05-03 09:43:10 +00:00
Gabor Juhos b0449ccf04 ramips: W306R V2.0 - GPIO and Network fixes 
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
       removing a line(default is correct), and reversed the
       Lan/wan layout LLLLW to WLLLL.

Added: image/Makefile now builds -factory.bin files. I am
       unsure of the accepted way to change the makefile but
       the name of the image needs to be 'linkn Kernel Image'
       in order to be accepted by the OEM firmware.

Known issue: eth0 (internal switch i think has mac address:
       00:11:22:33:44:55  but i think it should be same as
       the lan).
Known issue: Pressing the reset button has no noticable effect,
       i would expect the router to boot failsafe if being
       pressed on boot, reboot if short press and reset all
       to default if long press.

[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]

Signed-off-by: David Pearce <david_18051985@hotmail.com>

SVN-Revision: 31557
 2012-05-02 19:17:59 +00:00
Gabor Juhos 90e99b9fe8 ramips: Make serial console for DIR-300-B1 work again 
Make serial console for DIR-300-B1 work again.

With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.

Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31556
 2012-05-02 19:17:58 +00:00
Gabor Juhos fb28062182 mpc83xx: remove 2.6.36 support 
SVN-Revision: 31555
 2012-05-02 18:27:26 +00:00
Gabor Juhos 3269924fed mpc83xx: switch to 3.3 
SVN-Revision: 31554
 2012-05-02 18:27:25 +00:00
Gabor Juhos 8ee595315d mpc83xx: add support for 3.3 
SVN-Revision: 31553
 2012-05-02 18:27:22 +00:00
Gabor Juhos b4b5f2d018 linux/3.3: add more missing symbols 
SVN-Revision: 31552
 2012-05-02 18:27:19 +00:00
Florian Fainelli 5d9b44d110 use a define for the poll and debounce interval 
SVN-Revision: 31550
 2012-05-02 15:40:26 +00:00
Gabor Juhos 7a2b3d8a55 linux/3.3: add more missing symbols 
SVN-Revision: 31548
 2012-05-01 08:00:26 +00:00
Gabor Juhos 70322ba3d1 move CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT to the target configs 
SVN-Revision: 31547
 2012-05-01 08:00:25 +00:00
Imre Kaloz 880de62f91 switch to 2.6.38 
SVN-Revision: 31546
 2012-05-01 07:00:17 +00:00
Gabor Juhos cbfce53831 kernel: update linux 3.3 to 3.3.4 
SVN-Revision: 31541
 2012-04-30 08:38:11 +00:00
Gabor Juhos e931ffd678 linux: rtl836x: add a generic reset_switch function 
SVN-Revision: 31536
 2012-04-29 18:29:31 +00:00
Gabor Juhos 1d9400263f linux: rtl836x: rename rtl836*_hw_init to rtl836*_setup 
SVN-Revision: 31535
 2012-04-29 18:29:29 +00:00
Gabor Juhos badd7a3cf2 linux: rtl836x: add a reset_chip callback to rtl8366_smi_ops 
SVN-Revision: 31534
 2012-04-29 18:29:26 +00:00
Gabor Juhos 3e3a4d3d6b ar71xx: allow to disable link polling on unused PHYs 
SVN-Revision: 31533
 2012-04-29 18:29:24 +00:00
Gabor Juhos a8d3109208 rb532: remove 2.6.35 support 
The generic 2.6.35 support has been remove long time ago.

SVN-Revision: 31532
 2012-04-29 16:56:07 +00:00
Gabor Juhos 532b74ff7b linux/3.3: refresh patches 
SVN-Revision: 31531
 2012-04-29 16:56:03 +00:00
Gabor Juhos 27a1f6652a rdc: add 3.3 support 
SVN-Revision: 31530
 2012-04-29 15:59:49 +00:00
Gabor Juhos c59b60fa0b mpc85xx: add support for 3.3 
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 31529
 2012-04-29 15:55:28 +00:00
Gabor Juhos f687ca2296 orion: add 3.3 support 
SVN-Revision: 31528
 2012-04-29 15:20:40 +00:00
Gabor Juhos 923ebbac81 linux/3.3: yet another missing symbol 
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 31527
 2012-04-29 15:08:24 +00:00
Gabor Juhos 55fdc18beb linux/3.3: add support for the Pericom PT7C4338 I2C RTC chip 
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 31525
 2012-04-29 15:08:22 +00:00
Gabor Juhos f6d5998d31 mpc85xx: add kmod-booke-wdt to the default packages 
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 31523
 2012-04-29 15:00:38 +00:00
Gabor Juhos 296086868a mpc85xx: don't override CONFIG_WATHCDOG 
SVN-Revision: 31521
 2012-04-29 15:00:36 +00:00
Gabor Juhos 77735b5930 linux: move CONFIG_BOOKE_WDT to the generic config 
SVN-Revision: 31520
 2012-04-29 15:00:34 +00:00
Gabor Juhos 4fa9cf6c33 linux/2.6.36: R.I.P. 
SVN-Revision: 31519
 2012-04-29 15:00:33 +00:00
Gabor Juhos 3bc2afc384 linux: add broken flag to targets which are using 2.6.36 
SVN-Revision: 31518
 2012-04-29 15:00:32 +00:00
Gabor Juhos 417185b33c adm5120: create a new subtarget for the RB1xx devices 
SVN-Revision: 31513
 2012-04-29 07:36:46 +00:00
Gabor Juhos 7925eea45f adm5120: share a common kernel config between the subtargets 
SVN-Revision: 31512
 2012-04-29 07:36:44 +00:00
Gabor Juhos e96d52d198 adm5120: merge 3.3 patches 
SVN-Revision: 31511
 2012-04-29 07:36:43 +00:00
Gabor Juhos 19be4923e0 adm5120: remove 2.6.32 support 
SVN-Revision: 31510
 2012-04-29 07:36:37 +00:00
Gabor Juhos aa48f1326b adm5120: switch to 3.3.3 
SVN-Revision: 31509
 2012-04-29 07:36:36 +00:00
Gabor Juhos a1a0f67748 adm5120: fix macronix bootloc patch 
SVN-Revision: 31508
 2012-04-29 07:36:35 +00:00
Gabor Juhos 8e06682fb7 ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN 
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

SVN-Revision: 31507
 2012-04-29 07:36:33 +00:00
Gabor Juhos 1a0ef04231 adm8668: merge 3.3 fixes 
SVN-Revision: 31497
 2012-04-28 10:41:43 +00:00
Gabor Juhos 87ae19eaa3 adm8668: nuke 2.6.36 support 
SVN-Revision: 31496
 2012-04-28 10:39:47 +00:00
Gabor Juhos 9a7e9e76a3 adm8668: switch to 3.3 
SVN-Revision: 31495
 2012-04-28 10:38:53 +00:00
Florian Fainelli e047cf1899 switch to gpio-keys-polled 
SVN-Revision: 31491
 2012-04-27 16:44:48 +00:00
Gabor Juhos af2b3518af linux/3.3: yet another missing symbol 
SVN-Revision: 31488
 2012-04-27 06:31:43 +00:00
Felix Fietkau 34ffb526a2 build: rework verbosity level selection 
V=99 and V=1 are now deprecated in favor of a new verbosity class system,
though the old flags are still supported.
You can set the V variable on the command line (or OPENWRT_VERBOSE in the
environment) to one or more of the following characters:

- s: stdout+stderr (equal to the old V=99)
- c: commands (for build systems that suppress commands by default, e.g. kbuild)
- w: warnings/errors only (equal to the old V=1)

SVN-Revision: 31484
 2012-04-26 17:53:56 +00:00
Hauke Mehrtens d7b7b99d6e brcm47xx: BCMA - Modified PCI CFG space access 
The existing code (prior to the patch) does an "ioremap_nocache" on a
subset of a memory region that I think has already been mapped, and then
un-maps that smaller region when it is finished.

Thanks Nathan Hintz for the patch

SVN-Revision: 31481
 2012-04-25 20:32:17 +00:00
Gabor Juhos d8c7ac8a8a adm8668: add support for 3.3 
SVN-Revision: 31480
 2012-04-25 18:53:49 +00:00
Gabor Juhos 7f09ba740a adm8668: build gzip compressed uImage for testing 
SVN-Revision: 31479
 2012-04-25 18:53:48 +00:00
Gabor Juhos 15d641eee1 adm8668: use a suffix for initramfs images 
SVN-Revision: 31478
 2012-04-25 18:53:46 +00:00
Gabor Juhos a447f1810c ar71xx: enable MIB counters in the built-in switch of the AR934x 
SVN-Revision: 31476
 2012-04-25 13:02:11 +00:00
Gabor Juhos cad1fa359d adm5120: remove 2.6.38 support 
SVN-Revision: 31475
 2012-04-25 12:57:35 +00:00
Gabor Juhos 671361c7ea adm5120: add 3.3 support 
Partially based on the 3.1 patches by Hartmut Knaack <knaack.h [at] gmx.de>

SVN-Revision: 31474
 2012-04-25 12:57:33 +00:00
Gabor Juhos 43d67fa995 linux/3.3: fix compiler warnings in the plat_nand driver 
SVN-Revision: 31473
 2012-04-25 12:57:29 +00:00
Gabor Juhos 4319d95842 adm5120: make 5GXi depends on CPU_LITTLE_ENDIAN 
SVN-Revision: 31472
 2012-04-25 12:57:26 +00:00
Hauke Mehrtens e90d3f1663 brcm47xx: A couple of other (inconsequential) BCMA patches 
Noticed these while reviewing the code.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 31471
 2012-04-24 21:56:42 +00:00
Hauke Mehrtens b07998cf11 brcm47xx: b44 fix workaround detection on some brcm47xx boards 
Because of api change of nvram_getenv, the workaround failed to detect the hardware.

Based on patch by b.sander

Fixes #11268.

SVN-Revision: 31470
 2012-04-24 20:35:46 +00:00
Jonas Gorski 8a38c62c07 bcm63xx: drop linux 3.2 support 
SVN-Revision: 31464
 2012-04-24 11:49:27 +00:00
Jonas Gorski 77219290e1 bcm63xx: drop linux 3.0 support 
SVN-Revision: 31463
 2012-04-24 11:49:24 +00:00
Jonas Gorski 49de6c1714 bcm63xx: switch kernel to 3.3 
SVN-Revision: 31462
 2012-04-24 11:49:19 +00:00
Gabor Juhos 59b0c1b2b9 ar71xx: TL-WR741NDv4: add WLAN LED config 
On TP-Link TL-WR741ND version 4, the WLAN LED must be configured to work.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 31461
 2012-04-24 11:38:44 +00:00
Jonas Gorski 8fd383ae2e kernel: update linux 3.3 to 3.3.3 
SVN-Revision: 31460
 2012-04-24 09:25:38 +00:00
Jonas Gorski 22b4e6b882 kernel: update linux 3.2 to 3.2.16 
SVN-Revision: 31459
 2012-04-24 09:25:35 +00:00
Jonas Gorski 7ccf25f7da kernel: add some more missing kernel config symbols 
SVN-Revision: 31458
 2012-04-24 09:25:32 +00:00
Jo-Philipp Wich ed957f7c84 enable NF_CONNTRACK_PROCFS for Linux 3.3, required for /proc/net/nf_conntrack (#11339) 
SVN-Revision: 31454
 2012-04-24 00:55:57 +00:00
Gabor Juhos 4b6833b176 x86: restore config-default, it is needed for 2.6.39 
Reported-by: Thomas Heil <heil@terminal-consulting.de>

SVN-Revision: 31452
 2012-04-23 16:56:08 +00:00
Gabor Juhos 1ab80c7817 ramips: rt305x: add support for the UR-336UN board 
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

SVN-Revision: 31451
 2012-04-23 16:56:06 +00:00
Gabor Juhos 3626444c6d ramips: rt305x: add support for the Asus WL-330N3G board 
This patch adds support for the ASUS WL-330N3G

Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.

The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.

r = led is red
b = led is blue
0 = led is off

xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness

initial state	action	 led	gpio state

r0	b0	r0->r1	 r  	r0	b0
r0	b0	b0->b1   b	r0	b1

r1	b0	r1->r0	 0	r0	b0
r1	b0	b0->b1	 r	r1	*b1*

r1	b1	r1->r0   b	r0	b1
r1	b1	b1->b0   r	r1	b0

r0	b1	r0->r1   r	r1	*b1*
r0	b1	b1->b0   0	r0	r0

Signed-off-by: Frédéric Leroy <fredo@starox.org>

SVN-Revision: 31450
 2012-04-23 16:56:05 +00:00
Florian Fainelli 34f4f4a0c5 switch to 3.3 
SVN-Revision: 31448
 2012-04-23 12:33:30 +00:00
Florian Fainelli 9e054eb21a add support for 3.3 
SVN-Revision: 31447
 2012-04-23 12:33:27 +00:00
Florian Fainelli 460ef32930 switch to 3.3.2 
SVN-Revision: 31446
 2012-04-23 12:33:24 +00:00
Florian Fainelli 5eeee1f80e add 3.3 support 
SVN-Revision: 31445
 2012-04-23 12:33:19 +00:00
John Crispin d4f3677cba Adding wifi eeprom extract for ARV752DPW - Easybox 802 
Signed-off-by: Christian Rustmeier <rustmeier a.t. gmail dotty com>

SVN-Revision: 31443
 2012-04-23 09:40:37 +00:00
Felix Fietkau dcd185c2f8 ar8216: enable forwarding of multicast frames to the cpu port on ar8327 (thx, SeG) 
SVN-Revision: 31441
 2012-04-22 19:19:49 +00:00
Claudio Mignanti 858a50b41c flexibity: Cleanup the subtarget config 
SVN-Revision: 31440
 2012-04-22 16:56:10 +00:00
Claudio Mignanti 6cd35fe3d3 tqma9263: update board definition for 3.x series and fix config choose 
SVN-Revision: 31436
 2012-04-22 09:09:53 +00:00
Claudio Mignanti 2852345af0 Remove old netus board definition 
SVN-Revision: 31435
 2012-04-22 09:09:50 +00:00
Gabor Juhos 755b97303e ep93xx: remove 2.6.39 support 
SVN-Revision: 31434
 2012-04-22 07:20:55 +00:00
Gabor Juhos 631bf82241 amazon: remove 2.6.3{0,2} support 
SVN-Revision: 31433
 2012-04-22 07:20:53 +00:00
Gabor Juhos 96b5d437d6 omap24xx: remove 2.6.38 support 
SVN-Revision: 31426
 2012-04-21 17:16:40 +00:00
Gabor Juhos 76448ed5cf xburst: remove 2.6.36 support 
SVN-Revision: 31422
 2012-04-21 17:03:10 +00:00
Gabor Juhos 0cdd676554 malta: remove 2.6.39 and 3.0 support 
SVN-Revision: 31421
 2012-04-21 16:56:15 +00:00
Gabor Juhos 0d148cb63b mpc83xx: remove 2.6.32 support 
SVN-Revision: 31420
 2012-04-21 16:51:59 +00:00
Gabor Juhos 884a4d47f0 octeon: remove 2.6.30 support 
SVN-Revision: 31419
 2012-04-21 16:45:32 +00:00
Gabor Juhos 26b3cdad1c cns3xxx: remove 2.6.31 support 
SVN-Revision: 31418
 2012-04-21 16:42:05 +00:00
Gabor Juhos b2b965a696 au1000: remove 2.6.39 support 
SVN-Revision: 31416
 2012-04-21 16:30:40 +00:00
Gabor Juhos f63d216467 x86: remove 2.6.32 support 
SVN-Revision: 31415
 2012-04-21 16:17:48 +00:00
Gabor Juhos bc2a7bfa70 ixp4xx: remove 2.6.3{2,8} and 3.0 support 
SVN-Revision: 31414
 2012-04-21 16:17:46 +00:00
Gabor Juhos 50610aa869 linux/2.6.31: R.I.P. 
SVN-Revision: 31412
 2012-04-21 15:18:58 +00:00
Gabor Juhos 2e5d3d2795 linux/2.6.30: R.I.P. 
SVN-Revision: 31411
 2012-04-21 15:18:55 +00:00
Gabor Juhos c6379f6295 linux: add broken flag to targets which are using 2.6.30 
SVN-Revision: 31410
 2012-04-21 15:18:54 +00:00
Gabor Juhos c627479641 linux/3.3: nuke the gpio_buttons patch 
It is superseded by the in-kernel gpio-keys-polled driver.

SVN-Revision: 31409
 2012-04-21 14:26:35 +00:00
Gabor Juhos 2d91cb94ac mpc52xx: nuke 3.2 config 
SVN-Revision: 31408
 2012-04-21 12:36:47 +00:00
Gabor Juhos 0a83f90e21 mpc52xx: switch to 3.3.2 
SVN-Revision: 31407
 2012-04-21 12:36:45 +00:00
Gabor Juhos e904724726 mpc52xx: add kernel config for 3.3 
SVN-Revision: 31406
 2012-04-21 12:36:44 +00:00
Gabor Juhos 5024ffb976 ramips: nuke 3.2 suport 
SVN-Revision: 31405
 2012-04-21 12:30:53 +00:00
Gabor Juhos 6c8ca78067 ramips: switch to 3.3.2 
SVN-Revision: 31404
 2012-04-21 12:30:51 +00:00
Gabor Juhos 5c325b0057 ramips: add support for 3.3 
SVN-Revision: 31403
 2012-04-21 12:30:50 +00:00
Gabor Juhos 7f902c962b ramips: rt305x: add OHCI/EHCI registration code for RT3352 
SVN-Revision: 31402
 2012-04-21 12:30:48 +00:00
Gabor Juhos 1645928135 ramips: rt305x: fix CPU clock detection on RT3352 
SVN-Revision: 31401
 2012-04-21 12:30:47 +00:00
Gabor Juhos fb69e28eaf ramips: rt305x: use different memory size setup for RT3352 
SVN-Revision: 31400
 2012-04-21 12:30:45 +00:00
Gabor Juhos 818aeba960 ramips: rt3883: add profile and build sysupgrade image for the RT-N56U 
SVN-Revision: 31399
 2012-04-21 12:30:44 +00:00
Gabor Juhos 6b677e1d22 ramips: add swconfig to the default package list 
SVN-Revision: 31398
 2012-04-21 12:30:43 +00:00
Gabor Juhos ced031a0b2 ramips: build initramfs image for the Fonera 2.0N 
SVN-Revision: 31397
 2012-04-21 12:30:42 +00:00
Gabor Juhos fc88a363c0 ramips: rt305x: add initial support for Tenda W306R V2.0 
More device info at: http://wiki.openwrt.org/toh/tenda/w306r

Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]

SVN-Revision: 31396
 2012-04-21 12:30:40 +00:00
Gabor Juhos 88b5827c52 ramips: remove hardcoded console parameter from kernel configs 
SVN-Revision: 31395
 2012-04-21 12:30:30 +00:00
Gabor Juhos 1ffcaae700 linux/3.3: fix crypto4xx build failure 
SVN-Revision: 31394
 2012-04-21 10:47:04 +00:00
Mirko Vogt 87cdc0dd5b change /etc/config/network according to actual VLAN config to enable LAN port 4 on the ARV4520PW board 
The VLAN mapping on the ARV4520PW board is the following:

port on Router: | VLAN in software:
LAN 1           | 3
LAN 2           | 2
LAN 3           | 1
LAN 4           | 0
DSL             | 4

So LAN4 is not VLAN4 but VLAN0 (VLAN4 is DSL port) -> set "3 2 1 0 5t" as default switch config.

SVN-Revision: 31391
 2012-04-21 08:07:21 +00:00
Gabor Juhos 2624d67c08 ppc40x: nuke 3.2 support 
SVN-Revision: 31387
 2012-04-20 21:03:15 +00:00
Gabor Juhos f4833aa075 ppc40x: switch to 3.3.2 
SVN-Revision: 31386
 2012-04-20 21:03:14 +00:00
Gabor Juhos cfe4a6cb93 ppc40x: sync 3.3 config 
SVN-Revision: 31385
 2012-04-20 21:03:12 +00:00
Gabor Juhos 9140d4ee44 ar71xx: remove duplicated AP121 Kconfig entry 
SVN-Revision: 31382
 2012-04-20 16:50:16 +00:00
Gabor Juhos ef54b5736d cns21xx: remove 3.2 support 
SVN-Revision: 31381
 2012-04-20 15:25:00 +00:00
Gabor Juhos e667eb752b cns21xx: switch to 3.3.2 
SVN-Revision: 31380
 2012-04-20 15:24:59 +00:00
Gabor Juhos d1af548557 cns21xx: add support for 3.3 
SVN-Revision: 31379
 2012-04-20 15:24:57 +00:00
Gabor Juhos 434655d460 linux/3.3: update ARM mach-types 
SVN-Revision: 31378
 2012-04-20 15:24:54 +00:00
Claudio Mignanti 5c33f4e305 Add a missing symbol for config-3.3 
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>

SVN-Revision: 31373
 2012-04-20 13:33:04 +00:00
Claudio Mignanti 701309ec11 Reorganize the subtargets, group subtargets per cpu family 
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>

SVN-Revision: 31372
 2012-04-20 13:33:01 +00:00
Claudio Mignanti 3ac08ca653 Update the kernel to 3.3.x series, remove patches that doesn't apply anymore 
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>

SVN-Revision: 31371
 2012-04-20 13:32:55 +00:00
Claudio Mignanti f50231aeb3 Ensure that the bin directory exists before copy the files 
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>

SVN-Revision: 31370
 2012-04-20 13:27:16 +00:00
Florian Fainelli 147646fc66 remove some annoying warnings and fix snd modules build 
SVN-Revision: 31365
 2012-04-20 13:25:26 +00:00
Florian Fainelli eadf592371 add missing config symbol 
SVN-Revision: 31364
 2012-04-20 13:25:23 +00:00
Gabor Juhos da2cc2c79a ar71xx: nuke 3.2 support 
SVN-Revision: 31360
 2012-04-19 21:32:05 +00:00
Gabor Juhos 9854d6fb7f ar71xx: switch to 3.3.2 
SVN-Revision: 31359
 2012-04-19 21:31:58 +00:00
Gabor Juhos a6b4b5fd6e ar71xx: sync 3.3 config 
SVN-Revision: 31358
 2012-04-19 21:31:53 +00:00
Gabor Juhos ef97415b92 ar71xx: merge/reorganize 3.3 patches 
SVN-Revision: 31357
 2012-04-19 21:31:50 +00:00
Gabor Juhos 408de85883 ar71xx: use ap91_pci_init for RB751{,G} 
SVN-Revision: 31356
 2012-04-19 21:31:48 +00:00
Gabor Juhos 0a9832b50d ar71xx: move USB device registration directly into rb751{,g}_setup 
SVN-Revision: 31355
 2012-04-19 21:31:43 +00:00
Gabor Juhos 78967e6640 ar71xx: add ap9x_pci_get_wmac_data helper 
SVN-Revision: 31354
 2012-04-19 21:31:42 +00:00
Gabor Juhos 5c9ca38e47 ar71xx: add sanity checks to decode_rle 
Also use -EINVAL instead of -1.

SVN-Revision: 31353
 2012-04-19 21:31:40 +00:00
Gabor Juhos 8f921175ba avr32: remove old kernel support 
SVN-Revision: 31352
 2012-04-19 21:23:07 +00:00
Gabor Juhos 80705b9fb1 avr32: switch to 3.3.2 
uClibc-0.9.33 causes segfaults at least in iptables.
The segfaults are present with 2.6.39 as well, so it
makes no sense to stick to that version.

SVN-Revision: 31351
 2012-04-19 21:23:02 +00:00
Gabor Juhos abb57ea96f avr32: sync kernel config 
SVN-Revision: 31350
 2012-04-19 21:22:50 +00:00
Gabor Juhos 3108a4bb4b avr32: fix atomic64_t related kernel build errors 
SVN-Revision: 31349
 2012-04-19 21:22:48 +00:00
Florian Fainelli 26b3c31634 switch to 3.2.15 
SVN-Revision: 31345
 2012-04-18 15:36:33 +00:00
Florian Fainelli 2e641b13c0 fix 335-mips-kexec patch for all 3+ kernels 
SVN-Revision: 31344
 2012-04-18 15:36:30 +00:00
Jonas Gorski d0bfc67e2e kernel: x86: also update subtarget kernel versions 
SVN-Revision: 31338
 2012-04-17 21:01:43 +00:00
Jonas Gorski a8f2bc682e kernel: also update the targets to use 3.2.15 
Thanks Gabor for spotting it.

SVN-Revision: 31337
 2012-04-17 13:12:14 +00:00
Jonas Gorski 3a9b6dc313 kernel: update linux 3.3 to 3.3.2 
SVN-Revision: 31336
 2012-04-17 12:51:02 +00:00
Jonas Gorski ee4c47a134 kernel: update linux 3.2 to 3.2.15 
SVN-Revision: 31335
 2012-04-17 12:50:54 +00:00
Jo-Philipp Wich cfe30549a1 don't overwrite version.mk, substitute REVISION instead 
SVN-Revision: 31327
 2012-04-17 09:31:16 +00:00
Jo-Philipp Wich a0f0213462 bump to Linux v3.3.1 
SVN-Revision: 31314
 2012-04-16 15:04:47 +00:00
Jo-Philipp Wich 9d11e3395a Fix bufferbloat in PPPoATM TX queue 
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

SVN-Revision: 31313
 2012-04-16 15:04:45 +00:00
Jo-Philipp Wich 2036c23faa Update ppp TX restart patch to avoid race condition 
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

SVN-Revision: 31312
 2012-04-16 15:04:44 +00:00
John Crispin 83948d6385 adds 3.3 patches and files 
SVN-Revision: 31307
 2012-04-16 12:31:48 +00:00
Florian Fainelli fb2b2b958e backport missing platform data members for gpio-keys 
SVN-Revision: 31306
 2012-04-16 12:09:15 +00:00
Florian Fainelli e4f3867650 backport a missing eeprom 93cx6 define for building rt2x00 
SVN-Revision: 31305
 2012-04-16 12:09:13 +00:00
Florian Fainelli db728b6583 add missing debugging symbols 
SVN-Revision: 31302
 2012-04-16 11:38:35 +00:00
Florian Fainelli bb7cea7e65 add missing debugging symbols 
SVN-Revision: 31301
 2012-04-16 11:38:33 +00:00
Florian Fainelli c0ca7aed8e mark set but unused variables as such 
SVN-Revision: 31296
 2012-04-15 18:53:48 +00:00
Florian Fainelli a70ad13a79 refresh 2.6.32 patches 
SVN-Revision: 31295
 2012-04-15 18:53:45 +00:00
Florian Fainelli 47c8473475 refresh 2.6.32 patches 
SVN-Revision: 31294
 2012-04-15 18:53:42 +00:00
Florian Fainelli f2f5820d13 silence an annoying x86 warning 
SVN-Revision: 31293
 2012-04-15 18:53:39 +00:00
Hauke Mehrtens eb2191f5b0 at91: Missing kernel config symbols for AT91 target platform 
I looked into buildbot snapshots and noticed that some platforms have
not successfully compiled for a long time. One example is at91, which
seems to be missing device-related kernel config symbols and the
snapshot build crashes already there.

Please find attached a patch that makes the at91 kernel config and
build to succeed again.

Signed off by: hannu.nyman@iki.fi

SVN-Revision: 31288
 2012-04-15 09:50:51 +00:00
Hauke Mehrtens 7475bb3dc6 brcm47xx: fix a bug in the sprom handling of bcma, this broke all bcma based SoCs. 
bcma: use fallback sprom if no on chip sprom is available

SVN-Revision: 31285
 2012-04-14 12:12:22 +00:00
Hauke Mehrtens 62f0c3793b kernel: refresh patches 
SVN-Revision: 31279
 2012-04-13 19:37:15 +00:00
Hauke Mehrtens 6af575967c kernel: update bcma and ssb to version master-2012-04-12 from wireless-testing 
SVN-Revision: 31278
 2012-04-13 19:35:40 +00:00
Hauke Mehrtens c75e700d42 brcm47xx: remove support for kernel 3.0 
SVN-Revision: 31276
 2012-04-13 16:53:16 +00:00
Felix Fietkau 99768ccb7c ixp4xx: add support for linux 3.3.1 
SVN-Revision: 31275
 2012-04-13 13:38:49 +00:00
Felix Fietkau ec667208e6 kernel: fix arm compressed images build on mac os x 
SVN-Revision: 31274
 2012-04-13 13:38:45 +00:00
Jo-Philipp Wich 93b8648b15 don't overwrite version.mk, substitute REVISION instead 
SVN-Revision: 31271
 2012-04-13 10:47:45 +00:00
Jo-Philipp Wich 4b230e19fc PATCH: Disable console terminal in Grub for alix2 target 
The alix2 target has the VGA console for grub enabled by default. This
prevents the grub menu from appearing on bootup. It is disabled by
default for the other embedded x86 platforms. This patch corrects that
behavior for the alix2 target.

Signed-off-by: Adam Gensler <openwrt@kristenandadam.net>

SVN-Revision: 31270
 2012-04-12 23:30:27 +00:00
Jo-Philipp Wich 3cb72f38fd populate repositories.conf from version.mk 
SVN-Revision: 31268
 2012-04-12 23:08:13 +00:00
John Crispin e3889bcf7c update 3.2 patches 
sync with lantiq kernel series

SVN-Revision: 31260
 2012-04-12 12:33:56 +00:00
Jo-Philipp Wich 60a708edf1 remove preconfig variables 
SVN-Revision: 31257
 2012-04-12 09:43:43 +00:00
Jo-Philipp Wich d558632955 remove preconfig variables 
SVN-Revision: 31256
 2012-04-12 09:43:41 +00:00
Jo-Philipp Wich fcfdbd4961 add missing Kernel symbol spotted by buildbot 
SVN-Revision: 31232
 2012-04-10 10:09:27 +00:00
Imre Kaloz ed5abd5e4a add missing symbols 
SVN-Revision: 31231
 2012-04-09 17:03:02 +00:00
Jonas Gorski 50eba35cd3 kernel: update linux 3.3 to 3.3.1 
SVN-Revision: 31223
 2012-04-09 14:48:56 +00:00
Jonas Gorski 16b4cbcdd6 kernel: update linux 3.2 to 3.2.14 
SVN-Revision: 31222
 2012-04-09 14:48:51 +00:00
Jonas Gorski 1a57b05f47 kernel: add some more additional missing config symbols for 3.2 and 3.3 
SVN-Revision: 31221
 2012-04-09 14:48:46 +00:00
Mirko Vogt b0971e69f2 level up target xburst to linux kernel version 3.2.1 
Thanks to the qi-hardware project - especially to Lars, Maarten and Xiangfu

SVN-Revision: 31218
 2012-04-08 12:09:52 +00:00
Gabor Juhos f14fd53e3c ar71xx: image: build initramfs images for the WHR boards 
SVN-Revision: 31209
 2012-04-06 06:45:08 +00:00
Gabor Juhos e295a077ce ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD 
Great collaboration on these two fantastic routers on the openwrt forum:
https://forum.openwrt.org/viewtopic.php?id=32320
Above all kudos to aryufan. Well done and thank you everyone else who
contributed.

To-Do: LED for wlan is not yet activated
To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by
the router

Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
[juhosg: fix line wrapped patch, fix checkpatch errors, add missing
kernel patches]

SVN-Revision: 31208
 2012-04-06 06:45:07 +00:00
Gabor Juhos fe6d66afe2 ar71xx: add rb750 to diag.sh 
Support status led in diag.sh for RB750

Patch from: Evangelos Arkalis <arkalis.e@gmail.com>

SVN-Revision: 31207
 2012-04-06 06:45:04 +00:00
John Crispin da3f3f8f9d add Easybox 802 - ARV752DPW 
Implements the ARV752DPW architecture in mach-arv.c

Signed-off-by: Christian Rustmeier <rustmeier@gmail.com>

SVN-Revision: 31206
 2012-04-05 20:03:21 +00:00
John Crispin 94af65db49 enable usb on dgn3500 
A power-enable toggle gpio is not available, it is always on and protected with a resettable fuse.

Signed-off-by: Pieter Voorthuijsen<p.voorthuijsen at gmail.com>

SVN-Revision: 31205
 2012-04-05 20:03:19 +00:00
Florian Fainelli b545c4b4fe generic: use magic_long in sysupgrade 
Signed-off-by: Matthias Bücher <mail@maddes.net>

SVN-Revision: 31200
 2012-04-04 16:06:29 +00:00
Florian Fainelli 930a820172 update wrt350nv2-builder to v2.4 and use new functionality for target orion_generic 
Signed-off-by: Matthias Bücher <mail@maddes.net>

SVN-Revision: 31199
 2012-04-04 16:06:25 +00:00
Florian Fainelli b47fc0f936 add support for D-Link DNS-323 
this patch adds support for D-Link DNS323 storage device.
You can find more info here:

http://dns323.lukaperkov.net/

Currently you need serial cable to flash OpenWrt on DNS-323.

Signed-off-by: Luka Perkov < openwrt ->-to->- lukaperkov.net >

SVN-Revision: 31198
 2012-04-04 15:53:55 +00:00
Florian Fainelli 90e89bf4a9 add missing DM/MD config symbols 
SVN-Revision: 31197
 2012-04-04 15:53:52 +00:00
Florian Fainelli 152f38a615 fix typos in adm5120 switch driver (#4241) 
SVN-Revision: 31196
 2012-04-04 15:53:15 +00:00
Florian Fainelli 09ade17a15 add Edimax specific MAGIC_MAC_BASE to read MAC from flash (#4241] 
SVN-Revision: 31195
 2012-04-04 15:53:12 +00:00
Florian Fainelli b180e0fb3b fix support for 2.6.38 kernel 
This patch fixes the following issues I encountered while compiling kernel 2.6.38.8 for my Omnima Embedded Controller/Edimax BR6104KP:
    - kernel comes up with machine selection during build, even though everything was properly set in menuconfig
    - USB api changes
Successfully built and tested with r29755.

Signed-off-by: Hartmut Knaack <knaack.h [at] gmx.de>

SVN-Revision: 31194
 2012-04-04 15:53:09 +00:00