ccf95fe938
ar71xx: Fix AP135 PCI
...
AP135 has a pluggable PCIE slot unlike AP136.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36541
2013-05-03 19:00:58 +00:00
18c588a570
ar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce the frequency of DMA stop failures
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36530
2013-05-03 09:12:19 +00:00
30c4360345
kernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is used by iproute2
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36529
2013-05-02 15:59:57 +00:00
24636fcabf
bcm63xx: split into two subtargets, generic and SMP
...
Make SMP a subtarget, since it only supports BCM6362 and BCM6368.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36527
2013-05-02 15:28:31 +00:00
d11efa1428
bcm63xx: add SMP support for BCM6362 and BCM6368
...
BCM6358 requires further work due to its shared TLB.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36526
2013-05-02 15:28:26 +00:00
8f15326acc
kernel: generic: don't strip /proc/irq on SMP
...
/proc/irq is needed for changing the SMP affinity of interrupts.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36525
2013-05-02 15:28:12 +00:00
a80a4f3ec2
bcm63xx: fix hsspi flash registration for BCM6362
...
Use busnum 1 for HSSPI so it won't conflict on chips having both SPI
controllers.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36524
2013-05-02 15:28:10 +00:00
999a956f4c
bcm63xx: fix/enable livebox minipci
...
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
SVN-Revision: 36523
2013-05-02 15:28:07 +00:00
6ac2b3b76a
atheros: remove static gpio_request() from board setup and include generic kmod-gpio-button-hotplug instead.
...
This change is based on a patch by Karl Palsson <karlp@remake.is>
See http://patchwork.openwrt.org/patch/3536/ .
SVN-Revision: 36513
2013-05-02 11:46:53 +00:00
8a9fe26f20
kernel: update linux 3.8 to 3.8.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36507
2013-05-01 22:15:18 +00:00
db02b0e4ee
brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch
...
And while at it, also include a define check for BCM6328, thanks to
Gabor for spotting this.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36506
2013-05-01 21:52:25 +00:00
292368409e
brcm63xx: add missing binary operands to BCM6345 ethernet patch
...
Thanks to Emilio Arias for reporting it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36505
2013-05-01 21:12:40 +00:00
6f48ccea02
brcm63xx: remove 3.7 kernel support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36504
2013-05-01 21:12:26 +00:00
0ae43dbe9d
ar71xx: rename WNR2000v3 support patch
...
Update the numbering of kernel patch for supporting
Netgear WNR2000v3 from 617 to 618.
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36498
2013-04-30 10:44:11 +00:00
d557a51a40
x86/geos: switch to 3.8.10
...
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36496
2013-04-30 10:44:09 +00:00
0fa71ca3e5
linux/3.9: implement pcibios_get_phb_of_node for MIPS
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36495
2013-04-30 10:44:08 +00:00
41445b41cc
linux/3.8: use backported pcibios_get_phb_of_node patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36494
2013-04-30 10:44:07 +00:00
f718179af5
kernel: update linux 3.8 to 3.8.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36493
2013-04-30 10:43:59 +00:00
8e466dcdf4
at91: add missing config symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36492
2013-04-30 10:43:58 +00:00
d35545f3d7
linux/3.{8,9}: add missing symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36491
2013-04-30 10:43:57 +00:00
25c45c0d53
linux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODEL
...
It is forced to 'y' since r36342.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36490
2013-04-30 10:43:56 +00:00
eff12a630d
ramips: move dlink profile to correct sub folder - 2nd try
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36489
2013-04-30 10:34:20 +00:00
1db4587bc7
ramips: move dlink profile to correct sub folder
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36487
2013-04-30 08:24:26 +00:00
ca7f9638d5
broadcom-diag: support for the WNDR3700v3
...
I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it
was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and
LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the
bootloader and stock firmware will accept.
The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving
its LEDs through an HC164 8-bit shift register.
Signed-off-by: Owen Kirby <osk@exegin.com>
SVN-Revision: 36482
2013-04-28 21:11:17 +00:00
7dee0dae35
brcm47xx: use kernel 3.8.10 as default kernel
...
The biggest change with this kernel is a new partition parser.
SVN-Revision: 36480
2013-04-28 18:25:16 +00:00
00a7ace7cf
brcm47xx: add board detection for NETGEAR WNDR4500 V2
...
SVN-Revision: 36478
2013-04-28 18:19:31 +00:00
e7e4afbb64
kernel: fix a memory leak in split_rootfs_data()
...
allocate_partition() copies all the content of dpart into a new struct.
SVN-Revision: 36475
2013-04-28 17:01:56 +00:00
1bac172c44
kernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing master-2013-04-26.
...
SVN-Revision: 36473
2013-04-28 16:52:11 +00:00
ad1d3f00cb
kernel: update linux 3.9 patches to rc8
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36469
2013-04-28 11:55:23 +00:00
a33dd13c98
kernel: add missing bcma defines and header file for bcrmfmac
...
Fixes build failure when having kmod-mmc and brcmfmac selected.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36468
2013-04-28 11:10:42 +00:00
7c2632fbc5
ar71xx: add user-space support for WNR2000v3
...
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36461
2013-04-26 17:00:54 +00:00
b29b7b65ea
ar71xx: add profile and build image for WNR2000v3
...
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36460
2013-04-26 17:00:53 +00:00
9b3c0d11a2
ar71xx: Add Netgear WNR2000v3 support
...
Network connectivity works fine (LAN and WAN).
For GPIOs, only pwr led and the green wan leds are supported for now.
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36459
2013-04-26 17:00:52 +00:00
183e2af1c7
ar71xx: add profile and build image for the TL-WR720N v3 board
...
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36458
2013-04-26 17:00:50 +00:00
7c4e2c1f72
ar71xx: add user-space support for the TL-WR720N v3 board
...
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36457
2013-04-26 17:00:49 +00:00
5c11773f8a
ar71xx: add kernel support for TPLINK WR720N v3
...
Add support for TPLINK WR720N v3 which has 4MB flash,
32MB ram, 2 ethernet interfaces, 1 USB 2.0 port.
The patch is mostly a modification from mach-tl-wr703n.c.
GPIO numbers for the slider switch is from mach-tl-mr3020n.c.
Tested on my device and they worked fine.
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36456
2013-04-26 17:00:48 +00:00
c0691e29f1
mpc85xx: Add subtargets Generic and P1020
...
Only difference between Generic and P1020 is that P1020
enables SMP with two CPUs in the kernel config.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36454
2013-04-26 16:57:43 +00:00
36d4fd70bc
kernel: update linux 3.8 to 3.8.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36453
2013-04-26 16:55:42 +00:00
988ae9cbf8
at91: upgrade to kernel 3.8.7 and use devicetree
...
This upgrades the AT91 target to 3.8.7, and migrates to device tree.
This allows a single kernel to be built for most at91 variants which
simplifies things quite a bit. The immediate result is that all
subtargets are nuked, and any boards without dts files are no longer
supported, though the target now includes more boards than before. The
adc driver was also nuked as 3.8.7 includes a new one under the IIO
subsystem.
Signed-off-by: Adam Porter <porter.adam@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36452
2013-04-26 16:55:40 +00:00
c63bb1a18e
ramips: rt3883: fix build error
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36451
2013-04-26 16:55:28 +00:00
b42a173664
lantiq: make leds and network work on VG3503J
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36445
2013-04-25 19:03:41 +00:00
520bf46375
lantiq: fix board detection helpers
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36444
2013-04-25 19:03:37 +00:00
157c86371f
lantiq: move dts files to thir own folder
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36443
2013-04-25 19:03:32 +00:00
4664e21293
generic: fix rtl8366_smi compile warning
...
drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_sw_set_vlan_ports':
drivers/net/phy/rtl8366_smi.c:1125:6: warning: 'pvid' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36442
2013-04-25 19:03:29 +00:00
9ae3adbe3c
lantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36441
2013-04-25 19:03:25 +00:00
d3d18ae812
lantiq: make lzma-loader based images for VG3503J
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36440
2013-04-25 19:03:21 +00:00
a46acc80e4
lantiq: update VG3503J.dts to match new partition layout
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36439
2013-04-25 19:03:17 +00:00
46306c2e47
lantiq: add lzma-loader source
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36438
2013-04-25 19:03:13 +00:00
e141b73f9d
ramips: remove now unneeded user-space board detection
...
Now that ALL5002 and ALL5003 each got their own DTS and board names, remove
the now no longer needed user-space part which previously differentiated between
ALL5002 and ALL5003.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3558/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36436
2013-04-25 19:03:05 +00:00
cf3885eb0f
ramips: introduce DTS for ALL5003
...
Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c.
With the change to DTS, this is no longer accurate, as ALL5002 is based on
Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding
rt5350.dtsi need to be included for ALL5003.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3557/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36435
2013-04-25 19:03:01 +00:00
978567a89e
ramips: set preinit interface to eth0 by default.
...
This makes any ramips device accessible via ethernet in failsafe mode.
Based on: https://dev.openwrt.org/changeset/36322
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3567/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36434
2013-04-25 19:02:57 +00:00
7bfab6e308
ramips: Add Alpha ASL-26555 support.
...
This board uses a TrendChip SOC with its own RAM/Flash for ADSL support.
We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN.
There are two versions (Chile 8MB and Spain 16MB).
Wiki: http://wiki.openwrt.org/toh/alpha/asl26555
Signed-off-by: Esteban Benito <estebanjbs@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3571/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36433
2013-04-25 19:02:53 +00:00
c7216d0cab
ramips: Add support of D-link DIR-620D1
...
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36432
2013-04-25 19:02:48 +00:00
deb3635923
ramips: sync kernel patches with the mips-next tree
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36431
2013-04-25 19:02:42 +00:00
831c7ea04f
preinit: move cmdline failsafe= handling ot the generic code
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36430
2013-04-25 19:02:37 +00:00
90986b5581
bcm63xx: update patches with upstream submissions
...
SVN-Revision: 36407
2013-04-23 13:55:36 +00:00
2a1a16d2d5
bcm63xx: switch to linux 3.8
...
SVN-Revision: 36406
2013-04-23 13:55:17 +00:00
4e8f7f37ed
Change default IPv6 config to enable DHCPv6-PD
...
SVN-Revision: 36384
2013-04-22 19:40:16 +00:00
a8a01b42ae
kernel: allow __netdev_alloc_skb_ip_align to be called with dev = NULL
...
SVN-Revision: 36378
2013-04-22 15:01:36 +00:00
cd35ea2174
ar71xx: merge more unaligned access hacks from cerowrt-next
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36374
2013-04-22 12:53:21 +00:00
f58dcb59c6
kernel: backport SSB/BCMA changes in preparation for a compat-wireless update
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36367
2013-04-19 12:39:40 +00:00
f03960723a
linux/3.9: add missing config symbol
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36365
2013-04-19 08:07:38 +00:00
e07848664c
linux/3.[89]: update bridge_remove_ipv6_dependency patch
...
Fixes the following warning:
CC [M] net/ipv6/addrconf.o
net/ipv6/addrconf.c: In function 'addrconf_init':
net/ipv6/addrconf.c:4944:2: warning: assignment from incompatible pointer type [enabled by default]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36364
2013-04-19 08:07:37 +00:00
151cadfe32
kernel: update linux 3.8 to 3.8.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36363
2013-04-19 08:07:34 +00:00
96bb7c123b
build: consistently use 'depends on' instead of 'depends'
...
make the syntax more compatible with kernel menuconfig
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36351
2013-04-17 15:36:41 +00:00
e3003ea2a9
fix prepare_generic_squashfs
...
prepare_generic_squashfs was called twice on the generated images breaking mount_root
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36349
2013-04-17 11:54:09 +00:00
8001e6a689
fix rt305x gpio
...
https://dev.openwrt.org/ticket/13359
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36343
2013-04-16 06:58:18 +00:00
a662200205
kernel: force CONFIG_NET_SCHED=y for fq_codel ( #13360 )
...
SVN-Revision: 36342
2013-04-15 20:40:29 +00:00
57b68daee9
refresh against -rc7
...
SVN-Revision: 36340
2013-04-15 16:10:01 +00:00
604395650a
kernel: update linux 3.8 to 3.8.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36332
2013-04-14 09:25:53 +00:00
68c54dc34f
mpc85xx: use static SPI bus number for TL-WDR4900
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36329
2013-04-12 19:44:41 +00:00
54635e7f78
linux/3.8: backport 'spi/of: Use DT aliases for assigning bus number' from 3.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36328
2013-04-12 19:44:38 +00:00
d3a46c4b7f
update rt2880 config-3.8
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36327
2013-04-12 18:57:01 +00:00
92259c4803
fix up the rt2880 patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36326
2013-04-12 18:56:53 +00:00
a6424245e6
fix RT-N15 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36325
2013-04-12 18:56:44 +00:00
7af1fa46ad
update rt2880.dtsi
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36324
2013-04-12 18:56:36 +00:00
10f432ba9d
fix rtl8366s OF binding
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36323
2013-04-12 18:56:05 +00:00
687b3f04ce
mpc85xx: set preinit interface to eth0 by default
...
This makes the WDR4900 accessible via ethernet in
failsafe mode.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36322
2013-04-12 18:30:25 +00:00
40e15b1fbf
mpc85xx: Generate fdt for P1020RDB
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36321
2013-04-12 18:30:24 +00:00
f43bdf34cd
mpc85xx: Add P1020RDB board support
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36320
2013-04-12 18:30:22 +00:00
d5f87e193c
add VG3503J support
...
this adds basic support. the bootloader on these units is locked down.
until we have a replacement we can do basic testing with these env variables in uboot.
set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize)
set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000
unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle.
please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36315
2013-04-11 19:18:07 +00:00
fbc1e3732b
add FE phy firmware
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36314
2013-04-11 19:17:48 +00:00
0d32469457
add missing pinmux patch
...
Fix lantiq pinmux which affected PCI and USB.
Known affected boards are: ARV4518 and ARV7518.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 36312
2013-04-11 07:12:37 +00:00
6436b3f736
cns3xxx: fix USB ehci/ohci platform driver
...
Update ehci/ohci driver registration to conform to the new platform
drivers.
This fixes missing USB host support in 3.8.x
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 36309
2013-04-10 16:20:50 +00:00
edd8048107
kernel: calibrate the TWD timer even when booting with only one CPU, it is used for the watchdog timer base
...
Fixes booting on single-core CNS3xxx devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36308
2013-04-10 16:07:50 +00:00
06733c2650
kernel: keep the igmp proc support even with PROC_STRIPPED, some tools still use it
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36307
2013-04-10 13:45:12 +00:00
7fa2957103
kernel: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36304
2013-04-10 13:11:29 +00:00
df3d4690bd
kernel: keep dropped stats in fq_codel
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36303
2013-04-10 13:11:25 +00:00
ec3a8846fc
kernel: tune fq_codel defaults for common netdevice speeds
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36302
2013-04-10 13:11:21 +00:00
307965026a
kernel: add patches by Dave Täht to reduce buffer size in longer queues to reduce memory pressure
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36301
2013-04-10 13:11:16 +00:00
915969ff2c
kernel: refresh patches against 3.9-rc6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36297
2013-04-09 16:16:20 +00:00
c3366cd164
kernel: add support for PMC PM25LQ032 SPI Flash in m25p80.c
...
Add support for PMC PM25LQ032 (4MB) SPI Flash used in Hame MPR-A1 and clones.
Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36296
2013-04-09 16:16:16 +00:00
518d6a9273
kernel: backport switch user API changes after r36283
...
3.3 and 3.6 kernels do not make use of the UAPI headers, still they need
to provide an up-to-date switch.h copy for swconfig to build.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36295
2013-04-09 15:47:01 +00:00
fb47fd0d6b
unbreak portmapping - typo fix
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36293
2013-04-09 14:39:01 +00:00
bc7b310959
move memory detect node to dtsi files
...
Signed-of-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36290
2013-04-09 14:19:36 +00:00
48feea4861
Add Netgear WNCE2001 (OF version)
...
Add Netgear WNCE2001.
This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.
Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming
The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.
The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.
http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36289
2013-04-09 14:19:33 +00:00
e468abcae0
remove bootargs from dts
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36288
2013-04-09 14:19:28 +00:00
82c3b7ce26
add ofpart info to the devicetrees
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36287
2013-04-09 14:19:24 +00:00
f1e9d30ffc
add sample swconfig portmap
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36286
2013-04-09 14:19:20 +00:00
fcd962cc71
set of_node before registring the switch
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36285
2013-04-09 14:19:17 +00:00
fff58a5801
allow loading port maps from OF
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36283
2013-04-09 14:19:09 +00:00
ea94d66b0f
Adapt default network configuration for IPv6
...
SVN-Revision: 36278
2013-04-09 08:03:08 +00:00
130f67210a
ramips: TEW-691GR.dts fixes
...
* fix pinmux settings
* remove spi node
* add nor-flash node
* enable mdio-bus and add phy handle
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36276
2013-04-08 12:34:17 +00:00
a4a148f222
ramips: rt3883: enable the AR8216 driver
...
It is needed for the TEW-69{1,2}GR boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36275
2013-04-08 12:34:15 +00:00
a9d977b2af
ramips: add profile for the Omnima EMB-HPM board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36274
2013-04-08 11:12:04 +00:00
82705b30b3
ramips: OMNI-EMB-HPM.dts fixes
...
* add mdio-bus and phy nodes
* set phy-handle for the ethernet node
* define flash partiions
* cleanup flash node properties
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36273
2013-04-08 11:12:03 +00:00
909fabe574
ramips: add mdio-bus node to rt3883.dtsi
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36272
2013-04-08 11:12:02 +00:00
78ee80f2e8
ramips: fix MDIO/PHY handling
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36271
2013-04-08 11:12:01 +00:00
30e5bae84a
ramips: fix console speed for OMNI-EMB-HPM
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36270
2013-04-08 08:24:51 +00:00
cd7ce5226d
ramips: avoid invalid pointer dereference in pinmux code
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36269
2013-04-08 08:24:50 +00:00
4c85227cf4
ramips: TEW-692GR.dts fixes
...
* fix pinmux settings
* remove spi node
* add PCI node
* add nor-flash node
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36268
2013-04-08 07:11:35 +00:00
97635d7a8e
ramips: add PCI node into RTN56U.dts
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36264
2013-04-07 20:56:22 +00:00
474264f64c
ramips: add PCI node for rt3883.dtsi
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36263
2013-04-07 20:56:21 +00:00
6c8951313c
ramips: rt3883: enable PCI support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36262
2013-04-07 20:56:20 +00:00
b6b0a8fbee
ramips: fix RT3883 PCI driver
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36261
2013-04-07 20:56:18 +00:00
1700bf5b2e
ramips: refresh patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36260
2013-04-07 17:05:05 +00:00
6de8743e44
ramips: add missing cpu-feature-override.h files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36259
2013-04-07 17:05:04 +00:00
68875710fd
ramips: fix broken patch name
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36258
2013-04-07 16:26:27 +00:00
16d0ce52b0
ramips: fix polarity of GPIO buttons for RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36257
2013-04-07 16:24:33 +00:00
9e6ae6ab5d
x86/generic: remove old kernel configs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36256
2013-04-07 15:53:17 +00:00
0d0bfe3d41
x86/generic: switch to 3.8
...
Only tested within a VM.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36255
2013-04-07 15:53:15 +00:00
f5d28ea3ce
x86/generic: add config for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36254
2013-04-07 15:53:13 +00:00
71a51e3b91
x86/alix2: remove old kernel configs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36253
2013-04-07 15:53:11 +00:00
15d311ec18
x86/alix2: switch to 3.8
...
Tested on an alix2d13 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36252
2013-04-07 15:53:09 +00:00
9d05b1b683
x86/alix2: add config for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36251
2013-04-07 15:53:08 +00:00
89f690843f
x86: add support for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36250
2013-04-07 15:53:05 +00:00
d1f28c6d1f
ramips: add nor-flash node for the RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36249
2013-04-07 14:46:11 +00:00
0c3c29ca38
ramips: fix pinmux settings for the RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36248
2013-04-07 14:46:10 +00:00
66fbe78a93
ramips: pinmux fixes
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36247
2013-04-07 14:46:09 +00:00
aedf05caa0
ramips: remove trailing whitespaces from dts files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36246
2013-04-07 13:32:37 +00:00
017aabe292
ramips: handle PCI interrupts in plat_irq_dispatch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36245
2013-04-07 13:25:38 +00:00
811f7f9f2d
fix typos inside dts files
...
Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de>
SVN-Revision: 36244
2013-04-07 11:47:03 +00:00
709b19ed9f
fix default commandline in dts files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36243
2013-04-07 11:46:54 +00:00
85675528da
ramips: add cfi_cmdset_0002 patches
...
The parallel flash access on the RT-N56U is broken
without those patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36242
2013-04-07 11:37:15 +00:00
fde143b66f
cns3xxx: remove the watchdog IRQ from the resources, it breaks the driver init and is useful only for testing
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36241
2013-04-07 11:24:30 +00:00
10d8e4b66c
ramips: remove top-level {address,size}-cells properties from .dts files
...
Those are defined in the SoC specific .dtsi files.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36237
2013-04-07 08:19:10 +00:00
4a46687d25
brcm47xx: use old partition names again for kernel 3.8
...
This fixes sysupgrade. The partition names are used all over the Internet in various howtos.
Thank you russell for spotting this problem.
SVN-Revision: 36235
2013-04-06 22:22:26 +00:00
204bde8d98
brcm47xx: fix error in board detection when nvram is not available.
...
SVN-Revision: 36234
2013-04-06 19:02:25 +00:00
d45ef216e6
linux/3.8: implement pcibios_get_phb_of_node for MIPS
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36233
2013-04-06 17:33:03 +00:00
51fa28e2c2
linux/3.8: backport devm_ioremap_resource from 3.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36232
2013-04-06 17:33:00 +00:00
756b810178
ramips: fix ethernet switch node in DIR-645.dts
...
Fix a typo in the node name and add vendor prefix
for the compatible string.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36231
2013-04-06 17:19:35 +00:00
747b795b56
generic: rtl8367: add compatible string with vendor prefix
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36230
2013-04-06 17:19:31 +00:00
f5d8d80ca9
generic: rtl8367b: fix rtl8367b_extif_init_of
...
* disable external interface if its property is not present
* show an error message if the extif property is not valid
* use proper error values intead of -1
* fix memory leak
* wrap long lines
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36229
2013-04-06 17:03:09 +00:00
32d3b456f0
linux/3.8: add more missing symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36228
2013-04-06 16:56:47 +00:00
89539462a8
linux/3.8: add missing symbol
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36226
2013-04-06 16:38:36 +00:00
1ef39b43dd
ramips: remove spi node from RTN56.dts
...
The RT-N56U board uses a parallel flash.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36223
2013-04-06 12:37:40 +00:00
d57e662cda
ramips: fix ethernet switch node in RTN56U.dts
...
The RT-N56U uses an RTL8367M switch.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36222
2013-04-06 12:37:38 +00:00
4becd8590c
ramips: rt3883: enable the RTL8367 driver
...
That is needed by the Asus RT-N56U board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36221
2013-04-06 12:37:37 +00:00
38bd9b4337
generic: rtl8367: allow to load extif config from OF
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36220
2013-04-06 12:37:36 +00:00
585d19d168
generic: rtl8367: fix a typo in MODULE_DEVICE_TABLE macro
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36219
2013-04-06 12:37:34 +00:00
Gabor Juhos
Felix Fietkau
Jonas Gorski
Jo-Philipp Wich
Florian Fainelli
John Crispin
Hauke Mehrtens
Steven Barth
Imre Kaloz