Commit Graph

121 Commits (9292822023ba1cce79cab2519250ef25c277cb04)

Author SHA1 Message Date
Christian Lamparter 641dc50164 base-files: make it possible to specify switch led mode
The swconfig switch led driver has the ability to switch
between a "link, rx and/or tx" mode. However, this feature
was not implemented in uci, the led init script and
config_generate.

This patch adds a seventh parameter to the
ucidef_set_led_switch() function. The accepted values for
this parameter are: link, rx and tx.
Any permutations of these three values are supported, as
long as they are properly encased with quotes.
If the parameter is not specified it will default to "all"
(link rx tx).

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-09-29 17:23:11 +02:00
Florian Eckert 61a5994900 base-files: add network_get_metric() to /lib/functions/network.sh
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
2018-09-25 10:16:03 +02:00
Mathias Kresin dfee452713 base-files: add function to get mac as text from flash
Add a function to get a mac stored as text from flash. The octets of
the mac address need to be separated by any separator supported by
macaddr_canonicalize().

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-11 21:36:27 +02:00
Mathias Kresin ec28d2797c base-files: use consistent coding style
Add the opening bracket right after the function name, to do it the
same way for all functions in this file.

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-11 21:36:27 +02:00
Jo-Philipp Wich 1bad852ff5 base-files: network.sh: gracefully handle missing network.interface ubus ns
When attempting to use any of the functions in network.sh while netifd is
not started yet, the ubus interface dump query will fail with "Not found",
yielding an empty response.

Subsequently, jsonfilter is invoked with an empty string instead of a valid
JSON document, causing it to emit a second "unexpected end of data" error.

This caused the dnsmasq init script to log the following errors during
early boot on some systems:

    procd: /etc/rc.d/S19dnsmasq: Command failed: Not found.
    procd: /etc/rc.d/S19dnsmasq: Failed to parse json data: unexpected end of data.

Fix the issue by allowing the ubus query to fail with "Not found" but still
logging other failures, and by passing an empty JSON object to jsonfilter
if the interface status cache is empty.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-07-17 08:10:20 +02:00
Jo-Philipp Wich 7e664b7c2d base-files: fix ucidef_set_interface() protocol selection
The previous refactoring of ucidef_set_interface() removed the protocol
selection heuristic which breaks the networking defaults for the majority
of boards.

Re-add the protocol selection and rename two bad "proto" references to
the expected "protocol" value.

Fixes: 85048a9c1f ("base-files: rework _ucidef_set_interface to be more generic")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-05-25 07:48:25 +02:00
Roman Yeryomin 85048a9c1f base-files: rework _ucidef_set_interface to be more generic
This is a rework of previously submitted patch reworking
ucidef_set_interface_raw [1]. Here, keep the idea but instead
make _ucidef_set_interface more generic and use it instead of
ucidef_set_interface_raw.
Also change the users like ucidef_set_interface_lan and others.

[1] https://patchwork.ozlabs.org/patch/844961/

Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-05-24 09:39:47 +02:00
Mathias Kresin 3a4bf25fd6 base-files: get_dt_led: don't warn about missing led
It's intentional that some boards within a target don't have all LEDs
which are tried to be setup in a common script. Don't show a warning in
such cases.

Fixes: 4f4fc993db ("base-files: add more name source to get_dt_led helper function")
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-04-04 09:12:39 +02:00
Mathias Kresin 4f4fc993db base-files: add more name source to get_dt_led helper function
Not all LED driver are using the label devicetree property for the led
name. Add support for the TI/National Semiconductor LP55xx Led Drivers,
which are using the chan-name property for the led name, as fallback.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-03-14 19:04:52 +01:00
Mathias Kresin 64fef8f901 base-files: add function to get binary mac from file
Add a fucntion to get the a binary mac address from file. Use the new
function for mtd_get_mac_binary() to limit duplicate code.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-03-14 19:04:52 +01:00
Martin Schiller 1b1388f640 linux-atm: add br2684ctl option to specify the netdev name
Add the uci option nameprefix to specifc a target netdev name. Patch the
br2684ctl code to accept and set a netdev name via commandline parameters.

It allows to use the same netdev name for ATM and PTM lines on lantiq
xdsl hardware.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Mathis Kresin <dev@kresin.me>
2018-01-10 08:08:53 +01:00
Christian Lamparter da6fdce365 base-files: unify get_dt_led helper function
Lantiq and IPQ806X (which includes IPQ40XX) both define the
same custom function {ipq806x|lantiq}_get_dt_led.

This patch moves the function into the base-file package at
lib/functions/leds.sh to make it more accessible for other
targets as well.

Cc: Mathias Kresin <dev@kresin.me>
Cc: John Crispin <john@phrozen.org>
Cc: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2017-12-14 09:29:30 +01:00
Mathias Kresin 4cdbf4014b base-files: make ucidef_set_led_rssi offset and factor optional
The offset and factor are only related for LEDs which can have
different brightness values. But binary LEDs are more common and don't
require any further configuation than setting the factor to 1.

Use offset = 0 and factor = 1 in case nothing else is specified.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-06-17 15:38:19 +02:00
Jo-Philipp Wich 6426e4edef base-files: network.sh: fix a number of IPv6 logic flaws
* Change network_get_subnet6() to sensibly guess a suitable prefix

  Attempt to return the first non-linklocal, non-ula range, then attempt
  to return the first non-linklocal range and finally fall back to the
  previous behaviour of simply returning the first found item.

* Fix network_get_ipaddrs_all()

  Instead of replicating the flawed logic appending a fixed ":1" suffix
  to IPv6 addresses, rely on network_get_ipaddrs() and network_get_ipaddrs6()
  to build a single list of all interface addresses.

* Fix network_get_subnets6()

  Instead of replicating the flawed logic appending a fixed ":1" suffix
  to IPv6 addresses, rely on the ipv6-prefix-assignment.local-address
  field to figure out the proper network address.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-06-08 20:12:52 +02:00
Jo-Philipp Wich 7f91cabd0d base-files: network.sh: properly report local IPv6 addresses
Rework the network_get_ipaddr6() and network_get_ipaddrs6() functions to
fetch the effective local IPv6 address of delegated prefix from the
"local-address" field instead of naively hardcoding ":1" as static suffix.

Fixes FS#829.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-06-08 12:06:01 +02:00
Alberto Bursi 4242ddf8f2 base-files: add led functions to uci-defaults.sh
uci_set_leds_ataport() allows to set a led to show activity
on a specific (s)ata port, which is needed for devices that have
a Sata led for each sata port.
The led trigger is from the 834-ledtrig-libata.patch LEDE kernel patch.

uci_set_leds_usbhost() allows to set a led to show total usb activity.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
[Jo-Philipp Wich: use a single underscore to denote private functions]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-14 21:45:50 +02:00
Alberto Bursi b06a286a48 base-files: cleanup led functions in uci-defaults.sh
create a function with code common to all led functions,
create another function with code common to functions setting
a simple led trigger, restore alphabetical order in function names.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
[Jo-Philipp Wich: use a single underscore to denote private functions]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-14 21:45:50 +02:00
Jo-Philipp Wich 65de093c18 base-files: implement ucidef_set_hostname(), ucidef_set_ntpserver()
Commit 2036ae4 (base-files: support hostname and ntp servers through board.d)
was supposed to implement these procedures but lacked the required changes
to uci-defaults.sh.

Add the missing procedures now to fix config generation on targets relying
on hostname or NTP server presetting.

Fixes FS#754.

Reported-by: Cristian Morales Vega <cristian@samknows.com>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-05-03 13:47:57 +02:00
Mathias Kresin 0f01253b25 base-files: always set proto passed to _ucidef_set_interface()
Overwrite an already set proto if a new one is passed to
_ucidef_set_interface() similar to what is done for the interface.

It is required when using ""ucidef_set_interface_wan 'ptm0' 'pppoe'"
after some initial wan interface configuration is already done by
ucidef_add_switch.

The "json_is_a protocol string" guard is meant to not reset an earlier
set interface proto in case something like
"ucidef_set_interface_lan 'eth0'" is used afterwards.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 13:45:00 +01:00
Jo-Philipp Wich 73d923ed6b base-files: emit tagged switch configuration by default
Instead of only using tagged CPU port configurations when more than one VLAN
is present on the switch, always emit tagged configurations unless a board
explicitely opts out of this behaviour by using the previously introduced
[0-9]u@netdev syntax.

Emitting default tagged configurations has the following benefits:

 - Relation of switch vlans to netdevs is easier to understand, especially
   for multi-cpu-port switches

 - Adding additional VLANs (e.g. to break out a LAN port for other purposes)
   becomes easier as users are not forced to change the existing untagged
   VLAN to tagged and the existing ifname notation from ethX to ethX.Y
   anymore, drastly reducing the likelyhood of soft-bricks.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-02 00:13:49 +01:00
Jo-Philipp Wich 5e0441aaf0 base-files: uci-defaults: support requesting untagged switch port configuration
Introduce support for a new [0-9]u@netdev syntax to ucidev_add_switch() to let
board.d network files request default network switch configurations which do
not use tagged CPU ports.

This commit itself has no effect on generated configurations at the moment
since we still emit untagged configurations by default but it allows boards to
opt-out from default tagged configs in case we start emitting tagged settings
by default.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-02 01:06:29 +01:00
Rafał Miłecki 2187f57db6 base-files: add ucidef_set_led_usbport for full usbport support
This helper allows using usbport trigger directly. It requires usbport
compatible syntax and supports specifying multiple USB ports, e.g.:
ucidef_set_led_usbport "usb" "USB" "devicename:colour:function" "usb1-port1" "usb2-port1"

This adds a proper object to the board.json, e.g.
"usb": {
	"name": "USB",
	"type": "usbport",
	"sysfs": "devicename:colour:function",
	"ports": [
		"usb1-port1",
		"usb2-port1"
	]
}
and supports translating it into uci section.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-22 11:16:01 +02:00
Jonas Gorski 780ccbf9f1 base-files: board_detect: allow specifying the generated file
Allow passing a filename to change the location of the generated
board.json.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-13 15:49:51 +02:00
Felix Fietkau 577f873daf kernel: remove unused morse led trigger driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 20:53:02 +02:00
Jo-Philipp Wich 07f03d0833 base-files: support port_state LED types in board.d
Add support for handling port_state LEDs as used by ADM5120.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-08 00:31:09 +02:00
John Crispin 63c9caaa91 base-files: add function ucidef_set_interface_raw to enable default configuration on interfaces other than lan and wan.
Signed-off-by: Micke Prag <micke.prag@telldus.se>

SVN-Revision: 48976
2016-03-10 19:07:17 +00:00
Felix Fietkau 4ac99abeb3 lantiq: do not set default firmware file
We are now shipping a DSL firmware, do not set it by default to some
file name.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48941
2016-03-07 11:03:18 +00:00
Jo-Philipp Wich eced3b3a35 base-files: support passing mode to ucidef_set_led_netdev()
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48806
2016-02-26 14:49:17 +00:00
Felix Fietkau 285d9e364e base-files: add support for speed mask to switch config init scripts
This patch adds extra parameter to switch LED trigger initialization
functions.  New functionality maintains backward compatibility, so
calling functions without setting new speed_mask parameter works
as expected.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48776
2016-02-25 13:31:29 +00:00
John Crispin c0c3f2d4c9 leds: support oneshot as well as timer triggers
oneshot and timer have the same configuration options, just a different
trigger name.

Signed-off-by: Karl Palsson <karlp@etactica.com>

SVN-Revision: 48770
2016-02-25 10:14:16 +00:00
Felix Fietkau 0936f5b0e0 base-files: cleanup mtd_get_mac_binary hexdump
Remove usage of dd, as per request from Yousong Zhou.
<https://lists.openwrt.org/pipermail/openwrt-devel/2015-December/037743.html>

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47949
2015-12-19 11:28:42 +00:00
Felix Fietkau c74a690661 ar71xx: scan nand ubi partition for ath9k eeprom files
The MR18 stores the ath9k eeprom values on the NAND.
This patch makes it possible to retrieve the images
from there.

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47948
2015-12-19 11:28:36 +00:00
Jo-Philipp Wich 67e1c87012 all: drop old uci-defaults.sh
Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47867
2015-12-11 15:26:06 +00:00
Jo-Philipp Wich 08078df83d board.d: add support for gpio_switch sections
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47762
2015-12-04 15:02:32 +00:00
Jo-Philipp Wich 61a99da4f9 base-files: board.d: auto-set model id and name if /tmp/sysinfo is available
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47752
2015-12-04 11:06:57 +00:00
Jo-Philipp Wich 6c8daa6ba3 base-files: board.d: support dsl modems, atm bridges and pppoe protocol
This adds support for specifying the dsl modem, atm bridge configs and setting
the pppoe protocol for wan.

These additions are required to port the Lantiq target to board.d.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47750
2015-12-04 09:56:55 +00:00
Jo-Philipp Wich 527ec2af59 all: remove dummy ucidef_set_interface_loopback() from board.d
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47744
2015-12-03 23:13:00 +00:00
Jo-Philipp Wich f611358870 base-files: board.d: support specifiying the protocol of lan and wan
Some boards, e.g. the Sheeva Plug, require the lan interface to be set
to DHCP instead of a static address, therfore support that.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47732
2015-12-03 22:27:06 +00:00
Jo-Philipp Wich ac9bed4bc0 base-files: board.d: support timer leds
Add ucidef_set_led_timer() and handling for it to config_generate.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47731
2015-12-03 22:27:02 +00:00
Jo-Philipp Wich b3f8340a5e base-files: board.d: support ide leds
Add ucidef_set_led_ide() to define "ide-disk" triggered leds.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47729
2015-12-03 21:12:56 +00:00
Jo-Philipp Wich 734ae1bd17 base-files: uci-defaults-new.sh: fix for handling multiple ifnames
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47728
2015-12-03 21:12:51 +00:00
Jo-Philipp Wich 9b02e73188 board.d: merge ucidef_add_switch() and ucidef_add_switch_ports()
This changes uci-defaults-new.sh, config_generate and all relevant board.d
files in order combine ucidef_add_switch() and ucidef_add_switch_ports() into
a single function.

Also removes now superfluous enable and reset arguments.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47721
2015-12-03 17:30:24 +00:00
Jo-Philipp Wich d17a64c7c0 base-files: uci-defaults-new: remove reset/enable args of ucidef_add_switch()
Out of 69 switch definitions, only 3 pass something different than "1" as
values for reset and enable, with one of those three being invalid.

This change ...

 * removes the reset and enable arguments from ucidef_add_switch()
 * unconditionally writes reset:1 and enable:1 to JSON
 * converts the three users of nonstandard values to ucidef_add_switch_attr()

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47720
2015-12-03 17:30:08 +00:00
Jo-Philipp Wich 80f767d093 base-files: uci-defaults-new, config_generate: refactor code and drop old vlans
Remove support for now unused ucidef_add_switch_vlan(), move port->vlan and
vlan->interfaces conversion to uci-defaults-new.sh and massively simplify
config_generate.

This change prepares the following upcoming steps:

 * Eliminate use of ucidef_set_interface_lan_wan() for switch only devices
 * Merge ucidef_add_switch() with ucidef_add_switch_ports()

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47719
2015-12-03 16:25:19 +00:00
Jo-Philipp Wich 73a4e0334c base-files: uci-defaults-new, config_generate: allow force tagged cpu ports
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47679
2015-11-30 12:32:12 +00:00
Jo-Philipp Wich b64f953cd8 base-files: uci-defaults-new: fix unquoted variables
Properly quote variables in ucidef_set_interface_lan() and
ucidef_set_interface_lan(), otherwise interfaces with multiple devices
are not properly written into the configuration.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47673
2015-11-30 10:43:18 +00:00
Jo-Philipp Wich cfac7289c7 base-files: uci-defaults-new: add board id and name helpers
Add ucidef_set_board_id() and ucidef_set_model_name() procedures to store
model information in the board.json file.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47671
2015-11-30 10:17:05 +00:00
Jo-Philipp Wich 0e0119b6f0 base-files: uci-defaults-new, config_generate: support for gpio leds
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47660
2015-11-26 13:53:06 +00:00
Jo-Philipp Wich 8b9e839955 base-files: uci-defaults-new: remove ucidef_set_led_interface()
The only user was the hg255d board and config_generate did not even emit
proper uci for it.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47658
2015-11-26 12:46:09 +00:00
Jo-Philipp Wich bd4c757685 base-files: uci-defaults-new: fix storing rssi leds and triggers in board.json
Remove extra nesting of rssi leds in the led object and move rssi monitor
declaration to its own object.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47655
2015-11-26 12:04:38 +00:00